summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-20erofs: fix handling kern_mount() failureAl Viro
if you have a variable that holds NULL or a pointer to live struct mount, do not shove ERR_PTR() into it - not if you later treat "not NULL" as "holds a pointer to object". Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-02-19KVM/VMX: Move VERW closer to VMentry for MDS mitigationPawan Gupta
During VMentry VERW is executed to mitigate MDS. After VERW, any memory access like register push onto stack may put host data in MDS affected CPU buffers. A guest can then use MDS to sample host data. Although likelihood of secrets surviving in registers at current VERW callsite is less, but it can't be ruled out. Harden the MDS mitigation by moving the VERW mitigation late in VMentry path. Note that VERW for MMIO Stale Data mitigation is unchanged because of the complexity of per-guest conditional VERW which is not easy to handle that late in asm with no GPRs available. If the CPU is also affected by MDS, VERW is unconditionally executed late in asm regardless of guest having MMIO access. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Sean Christopherson <seanjc@google.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
2024-02-19KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCHSean Christopherson
Use EFLAGS.CF instead of EFLAGS.ZF to track whether to use VMRESUME versus VMLAUNCH. Freeing up EFLAGS.ZF will allow doing VERW, which clobbers ZF, for MDS mitigations as late as possible without needing to duplicate VERW for both paths. Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Nikolay Borisov <nik.borisov@suse.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-5-a6216d83edb7%40linux.intel.com
2024-02-19x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static keyPawan Gupta
The VERW mitigation at exit-to-user is enabled via a static branch mds_user_clear. This static branch is never toggled after boot, and can be safely replaced with an ALTERNATIVE() which is convenient to use in asm. Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user path. Also remove the now redundant VERW in exc_nmi() and arch_exit_to_user_mode(). Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
2024-02-19x86/entry_32: Add VERW just before userspace transitionPawan Gupta
As done for entry_64, add support for executing VERW late in exit to user path for 32-bit mode. Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-3-a6216d83edb7%40linux.intel.com
2024-02-19x86/entry_64: Add VERW just before userspace transitionPawan Gupta
Mitigation for MDS is to use VERW instruction to clear any secrets in CPU Buffers. Any memory accesses after VERW execution can still remain in CPU buffers. It is safer to execute VERW late in return to user path to minimize the window in which kernel data can end up in CPU buffers. There are not many kernel secrets to be had after SWITCH_TO_USER_CR3. Add support for deploying VERW mitigation after user register state is restored. This helps minimize the chances of kernel data ending up into CPU buffers after executing VERW. Note that the mitigation at the new location is not yet enabled. Corner case not handled ======================= Interrupts returning to kernel don't clear CPUs buffers since the exit-to-user path is expected to do that anyways. But, there could be a case when an NMI is generated in kernel after the exit-to-user path has cleared the buffers. This case is not handled and NMI returning to kernel don't clear CPU buffers because: 1. It is rare to get an NMI after VERW, but before returning to userspace. 2. For an unprivileged user, there is no known way to make that NMI less rare or target it. 3. It would take a large number of these precisely-timed NMIs to mount an actual attack. There's presumably not enough bandwidth. 4. The NMI in question occurs after a VERW, i.e. when user state is restored and most interesting data is already scrubbed. Whats left is only the data that NMI touches, and that may or may not be of any interest. Suggested-by: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
2024-02-19x86/bugs: Add asm helpers for executing VERWPawan Gupta
MDS mitigation requires clearing the CPU buffers before returning to user. This needs to be done late in the exit-to-user path. Current location of VERW leaves a possibility of kernel data ending up in CPU buffers for memory accesses done after VERW such as: 1. Kernel data accessed by an NMI between VERW and return-to-user can remain in CPU buffers since NMI returning to kernel does not execute VERW to clear CPU buffers. 2. Alyssa reported that after VERW is executed, CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system call. Memory accesses during stack scrubbing can move kernel stack contents into CPU buffers. 3. When caller saved registers are restored after a return from function executing VERW, the kernel stack accesses can remain in CPU buffers(since they occur after VERW). To fix this VERW needs to be moved very late in exit-to-user path. In preparation for moving VERW to entry/exit asm code, create macros that can be used in asm. Also make VERW patching depend on a new feature flag X86_FEATURE_CLEAR_CPU_BUF. Reported-by: Alyssa Milburn <alyssa.milburn@intel.com> Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com
2024-02-19parisc: Fix stack unwinderGuenter Roeck
Debugging shows a large number of unaligned access traps in the unwinder code. Code analysis reveals a number of issues with this code: - handle_interruption is passed twice through dereference_kernel_function_descriptor() - ret_from_kernel_thread, syscall_exit, intr_return, _switch_to_ret, and _call_on_stack are passed through dereference_kernel_function_descriptor() even though they are not declared as function pointers. To fix the problems, drop one of the calls to dereference_kernel_function_descriptor() for handle_interruption, and compare the other pointers directly. Fixes: 6414b30b39f9 ("parisc: unwind: Avoid missing prototype warning for handle_interruption()") Fixes: 8e0ba125c2bf ("parisc/unwind: fix unwinder when CONFIG_64BIT is enabled") Cc: Helge Deller <deller@gmx.de> Cc: Sven Schnelle <svens@stackframe.org> Cc: John David Anglin <dave.anglin@bell.net> Cc: Charlie Jenkins <charlie@rivosinc.com> Cc: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2024-02-19drm/ci: mark universal-plane-sanity as failing on SC7180Dmitry Baryshkov
The test kms_universal_plane@universal-plane-sanity fails on both SC7180 platforms. The drm/msm returns -ERANGE as it can not handle passet scaling range, however the test is not ready to handle that. Mark the test as failing until it is fixed. ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Test assertion failure function sanity_test_pipe, file ../tests/kms_universal_plane.c:438: ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Failed assertion: drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id, output->config.crtc->crtc_id, test.oversized_fb.fb_id, 0, 0, 0, mode->hdisplay + 100, mode->vdisplay + 100, IGT_FIXED(0,0), IGT_FIXED(0,0), IGT_FIXED(mode->hdisplay,0), IGT_FIXED(mode->vdisplay,0)) == expect ERROR - Igt error: (kms_universal_plane:1554) CRITICAL: Last errno: 34, Numerical result out of range Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240218041204.2522828-3-dmitry.baryshkov@linaro.org
2024-02-19drm/ci: update msm-apq8096-fails listDmitry Baryshkov
Mark two tests as passing on the APQ8096 / db820c platform. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240218041204.2522828-2-dmitry.baryshkov@linaro.org
2024-02-19drm/ci: update IGT test namesDmitry Baryshkov
Since the addition of testlist.txt the IGT has changed some of test names. Some test names were changed to use '-' instead of '_'. In other cases tests were just renamed. Follow those changes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Rob Clark <robdclark@chromium.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240218041204.2522828-1-dmitry.baryshkov@linaro.org
2024-02-19drm/amdgpu: add MMHUB 3.3.1 supportYifan Zhang
This patch to add MMHUB 3.3.1 support. v2: squash in fault info fix (Alex) Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-19drm/amd/display: Remove break after returnRodrigo Siqueira
Remove break after return since it will never be reached. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-02-19drm/ci: skip suspend tests for both msm-sc7180 machinesDmitry Baryshkov
The commit ea489a3d983b ("drm/ci: add sc7180-trogdor-kingoftown") dropped the msm-sc7180-skips.txt file, which disabled suspend-to-RAM tests. However testing shows that STR tests still can fail. Restore the skiplist, applying it to both limozeen and kingoftown machines. Fixes: ea489a3d983b ("drm/ci: add sc7180-trogdor-kingoftown") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Vignesh Raman <vignesh.raman@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240216205650.2446153-1-dmitry.baryshkov@linaro.org
2024-02-19PCI/MSI: Prevent MSI hardware interrupt number truncationVidya Sagar
While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0. To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number. Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels. Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com
2024-02-19irqchip/sifive-plic: Enable interrupt if needed before EOINam Cao
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as explained in the description of Interrupt Completion in the PLIC spec: "The PLIC signals it has completed executing an interrupt handler by writing the interrupt ID it received from the claim to the claim/complete register. The PLIC does not check whether the completion ID is the same as the last claim ID for that target. If the completion ID does not match an interrupt source that *is currently enabled* for the target, the completion is silently ignored." Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked") ensured that EOI is successful by enabling interrupt first, before EOI. Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") removed the interrupt enabling code from the previous commit, because it assumes that interrupt should already be enabled at the point of EOI. However, this is incorrect: there is a window after a hart claiming an interrupt and before irq_desc->lock getting acquired, interrupt can be disabled during this window. Thus, EOI can be invoked while the interrupt is disabled, effectively nullify this EOI. This results in the interrupt never gets asserted again, and the device who uses this interrupt appears frozen. Make sure that interrupt is really enabled before EOI. Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations") Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Samuel Holland <samuel@sholland.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: linux-riscv@lists.infradead.org Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
2024-02-19platform/x86/amd/pmf: Fix a potential race with policy binary sideloadMario Limonciello
The debugfs `update_policy` file is created before amd_pmf_start_policy_engine() has completed, and thus there could be a possible (albeit unlikely) race between sideloading a policy and the BIOS policy getting setup. Move the debugfs file creation after all BIOS policy is setup. Fixes: 10817f28e533 ("platform/x86/amd/pmf: Add capability to sideload of policy binary") Reported-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/platform-driver-x86/15df7d02-b0aa-457a-954a-9d280a592843@redhat.com/T/#m2c445f135e5ef9b53184be7fc9df84e15f89d4d9 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217015642.113806-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()Mario Limonciello
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but the error handling flow doesn't clean everything up allocated memory. As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(), fold it into the function and add labels to clean up any step that can fail along the way. Explicitly set everything allocated to NULL as there are other features that may access some of the same variables. Fixes: 7c45534afa44 ("platform/x86/amd/pmf: Add support for PMF Policy Binary") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217014107.113749-3-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Add debugging message for missing policy dataMario Limonciello
If a machine advertises Smart PC support but is missing policy data show a debugging message to help clarify why Smart PC wasn't enabled. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217014107.113749-2-mario.limonciello@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Fix a suspend hang on Framework 13Mario Limonciello
The buffer is cleared in the suspend handler but used in the delayed work for amd_pmf_get_metrics(). Stop clearing it to fix the hang. Reported-by: Trolli Schmittlauch <t.schmittlauch@orlives.de> Closes: https://lore.kernel.org/regressions/ed2226ff-257b-4cfd-afd6-bf3be9785474@localhost/ Closes: https://community.frame.work/t/kernel-6-8-rc-system-freezes-after-resuming-from-suspend-reproducers-wanted/45381 Fixes: 2b3a7f06caaf ("platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr()") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240217005216.113408-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resumeShyam Sundar S K
TEE enact command failures are seen after each suspend/resume cycle; fix this by cancelling the policy builder workqueue before going into suspend and reschedule the workqueue after resume. [ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP [ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0 [ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1 [ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7 [ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16 Fixes: ae82cef7d9c5 ("platform/x86/amd/pmf: Add support for PMF-TA interaction") Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240216064112.962582-2-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19platform/x86/amd/pmf: Remove smart_pc_status enumShyam Sundar S K
Improve code readability by removing smart_pc_status enum, as the same can be done with a simple true/false check; Update the code checks accordingly. Also add a missing return on amd_pmf_init_smart_pc() success, to skip trying to setup the auto / slider modes which should not be used in this case. Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240216064112.962582-1-Shyam-sundar.S-k@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19drm/xe/uapi: Remove support for persistent exec_queuesThomas Hellström
Persistent exec_queues delays explicit destruction of exec_queues until they are done executing, but destruction on process exit is still immediate. It turns out no UMD is relying on this functionality, so remove it. If there turns out to be a use-case in the future, let's re-add. Persistent exec_queues were never used for LR VMs v2: - Don't add an "UNUSED" define for the missing property (Lucas, Rodrigo) v3: - Remove the remaining struct xe_exec_queue::persistent state (Niranjana, Lucas) Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Francois Dugast <francois.dugast@intel.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240209113444.8396-1-thomas.hellstrom@linux.intel.com
2024-02-19platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen dataHans de Goede
Now that prefix matches for ACPI names are supported, the ts_dmi_data structs for "GDIX1001:00" and "GDIX1001:01" can be consolidated into a single match matching on "GDIX1001". For consistency also change gdix1002_00_upside_down_data to match. Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240212120608.30469-2-hdegoede@redhat.com
2024-02-19platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI namesHans de Goede
On some devices the ACPI name of the touchscreen is e.g. either MSSL1680:00 or MSSL1680:01 depending on the BIOS version. This happens for example on the "Chuwi Hi8 Air" tablet where the initial commit's ts_data uses "MSSL1680:00" but the tablets from the github issue and linux-hardware.org probe linked below both use "MSSL1680:01". Replace the strcmp() match on ts_data->acpi_name with a strstarts() check to allow using a partial match on just the ACPI HID of "MSSL1680" and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly to fix the touchscreen not working on models where it is "MSSL1680:01". Note this drops the length check for I2C_NAME_SIZE. This never was necessary since the ACPI names used are never more then 11 chars and I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long before reaching I2C_NAME_SIZE. Link: https://linux-hardware.org/?computer=AC4301C0542A Fixes: bbb97d728f77 ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet") Closes: https://github.com/onitake/gsl-firmware/issues/91 Cc: stable@vger.kernel.org Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
2024-02-19platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()Hans de Goede
Since commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") the ACPI OSL code passes IRQF_ONESHOT when requesting the SCI. Since the INT0002 GPIO is typically shared with the ACPI SCI the INT0002 driver must pass the same flags. This fixes the INT0002 driver failing to probe due to following error + as well as removing the backtrace that follows this error: "genirq: Flags mismatch irq 9. 00000084 (INT0002) vs. 00002080 (acpi)" Fixes: 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for SCI") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240210110149.12803-1-hdegoede@redhat.com
2024-02-19platform/x86: think-lmi: Fix password opcode ordering for workstationsMark Pearson
The Lenovo workstations require the password opcode to be run before the attribute value is changed (if Admin password is enabled). Tested on some Thinkpads to confirm they are OK with this order too. Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca> Fixes: 640a5fa50a42 ("platform/x86: think-lmi: Opcode support") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20240209152359.528919-1-mpearson-lenovo@squebb.ca Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2024-02-19drm/panel: simple: Add BOE BP082WX1-100 8.2" panelTony Lindgren
The BOE BP082WX1-100 is a 8.2" panel similar to the 10.1" panel BP101WX1-100. Both panels use the same timings. Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240211111703.7567-2-tony@atomide.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240211111703.7567-2-tony@atomide.com
2024-02-19dt-bindings: display: simple: Add boe,bp082wx1-100 8.2" panelTony Lindgren
This panel is found on Motorola mapphone tablets mz607 to mz609. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240211111703.7567-1-tony@atomide.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240211111703.7567-1-tony@atomide.com
2024-02-19selftests/bpf: Add negtive test cases for task iterYafang Shao
Incorporate a test case to assess the handling of invalid flags or task__nullable parameters passed to bpf_iter_task_new(). Prior to the preceding commit, this scenario could potentially trigger a kernel panic. However, with the previous commit, this test case is expected to function correctly. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240217114152.1623-3-laoar.shao@gmail.com
2024-02-19bpf: Fix an issue due to uninitialized bpf_iter_taskYafang Shao
Failure to initialize it->pos, coupled with the presence of an invalid value in the flags variable, can lead to it->pos referencing an invalid task, potentially resulting in a kernel panic. To mitigate this risk, it's crucial to ensure proper initialization of it->pos to NULL. Fixes: ac8148d957f5 ("bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)") Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Oleg Nesterov <oleg@redhat.com> Link: https://lore.kernel.org/bpf/20240217114152.1623-2-laoar.shao@gmail.com
2024-02-19selftests/bpf: Test racing between bpf_timer_cancel_and_free and ↵Martin KaFai Lau
bpf_timer_cancel This selftest is based on a Alexei's test adopted from an internal user to troubleshoot another bug. During this exercise, a separate racing bug was discovered between bpf_timer_cancel_and_free and bpf_timer_cancel. The details can be found in the previous patch. This patch is to add a selftest that can trigger the bug. I can trigger the UAF everytime in my qemu setup with KASAN. The idea is to have multiple user space threads running in a tight loop to exercise both bpf_map_update_elem (which calls into bpf_timer_cancel_and_free) and bpf_timer_cancel. Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20240215211218.990808-2-martin.lau@linux.dev
2024-02-19bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancelMartin KaFai Lau
The following race is possible between bpf_timer_cancel_and_free and bpf_timer_cancel. It will lead a UAF on the timer->timer. bpf_timer_cancel(); spin_lock(); t = timer->time; spin_unlock(); bpf_timer_cancel_and_free(); spin_lock(); t = timer->timer; timer->timer = NULL; spin_unlock(); hrtimer_cancel(&t->timer); kfree(t); /* UAF on t */ hrtimer_cancel(&t->timer); In bpf_timer_cancel_and_free, this patch frees the timer->timer after a rcu grace period. This requires a rcu_head addition to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init, this does not need a kfree_rcu because it is still under the spin_lock and timer->timer has not been visible by others yet. In bpf_timer_cancel, rcu_read_lock() is added because this helper can be used in a non rcu critical section context (e.g. from a sleepable bpf prog). Other timer->timer usages in helpers.c have been audited, bpf_timer_cancel() is the only place where timer->timer is used outside of the spin_lock. Another solution considered is to mark a t->flag in bpf_timer_cancel and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free, it busy waits for the flag to be cleared before kfree(t). This patch goes with a straight forward solution and frees timer->timer after a rcu grace period. Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.") Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hou Tao <houtao1@huawei.com> Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev
2024-02-19dt-bindings: display: ti,am65x-dss: Add support for common1 regionDevarsh Thakkar
TI keystone display subsystem present in AM65, AM62 and AM62A SoC support two separate register spaces namely "common" and "common1" which can be used by two separate hosts to program the display controller as described in respective Technical Reference Manuals [1]. The common1 register space has similar set of configuration registers as supported in common register space except the global configuration registers which are exclusive to common region. This adds binding for "common1" register region too as supported by the hardware. [1]: AM62x TRM: https://www.ti.com/lit/pdf/spruiv7 (Section 14.8.9.1 DSS Registers) AM65x TRM: https://www.ti.com/lit/pdf/spruid7 (Section 12.6.5 DSS Registers) AM62A TRM: https://www.ti.com/lit/pdf/spruj16 (Section 14.9.9 Display Subsystem Registers) Fixes: 2d8730f1021f ("dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding") Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240216062426.4170528-2-devarsht@ti.com
2024-02-19enic: Avoid false positive under FORTIFY_SOURCEKees Cook
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel code base has been converted to flexible arrays. In order to enforce the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized destinations need to be handled. Unfortunately, struct vic_provinfo resists full conversion, as it contains a flexible array of flexible arrays, which is only possible with the 0-sized fake flexible array. Use unsafe_memcpy() to avoid future false positives under CONFIG_FORTIFY_SOURCE. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-19ionic: use pci_is_enabled not open codeShannon Nelson
Since there is a utility available for this, use the API rather than open code. Fixes: 13943d6c8273 ("ionic: prevent pci disable of already disabled device") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-19btrfs: fix deadlock with fiemap and extent lockingJosef Bacik
While working on the patchset to remove extent locking I got a lockdep splat with fiemap and pagefaulting with my new extent lock replacement lock. This deadlock exists with our normal code, we just don't have lockdep annotations with the extent locking so we've never noticed it. Since we're copying the fiemap extent to user space on every iteration we have the chance of pagefaulting. Because we hold the extent lock for the entire range we could mkwrite into a range in the file that we have mmap'ed. This would deadlock with the following stack trace [<0>] lock_extent+0x28d/0x2f0 [<0>] btrfs_page_mkwrite+0x273/0x8a0 [<0>] do_page_mkwrite+0x50/0xb0 [<0>] do_fault+0xc1/0x7b0 [<0>] __handle_mm_fault+0x2fa/0x460 [<0>] handle_mm_fault+0xa4/0x330 [<0>] do_user_addr_fault+0x1f4/0x800 [<0>] exc_page_fault+0x7c/0x1e0 [<0>] asm_exc_page_fault+0x26/0x30 [<0>] rep_movs_alternative+0x33/0x70 [<0>] _copy_to_user+0x49/0x70 [<0>] fiemap_fill_next_extent+0xc8/0x120 [<0>] emit_fiemap_extent+0x4d/0xa0 [<0>] extent_fiemap+0x7f8/0xad0 [<0>] btrfs_fiemap+0x49/0x80 [<0>] __x64_sys_ioctl+0x3e1/0xb50 [<0>] do_syscall_64+0x94/0x1a0 [<0>] entry_SYSCALL_64_after_hwframe+0x6e/0x76 I wrote an fstest to reproduce this deadlock without my replacement lock and verified that the deadlock exists with our existing locking. To fix this simply don't take the extent lock for the entire duration of the fiemap. This is safe in general because we keep track of where we are when we're searching the tree, so if an ordered extent updates in the middle of our fiemap call we'll still emit the correct extents because we know what offset we were on before. The only place we maintain the lock is searching delalloc. Since the delalloc stuff can change during writeback we want to lock the extent range so we have a consistent view of delalloc at the time we're checking to see if we need to set the delalloc flag. With this patch applied we no longer deadlock with my testcase. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-02-19btrfs: defrag: avoid unnecessary defrag caused by incorrect extent sizeQu Wenruo
[BUG] With the following file extent layout, defrag would do unnecessary IO and result more on-disk space usage. # mkfs.btrfs -f $dev # mount $dev $mnt # xfs_io -f -c "pwrite 0 40m" $mnt/foobar # sync # xfs_io -f -c "pwrite 40m 16k" $mnt/foobar # sync Above command would lead to the following file extent layout: item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 41943040 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none) Which is mostly fine. We can allow the final 16K to be merged with the previous 40M, but it's upon the end users' preference. But if we defrag the file using the default parameters, it would result worse file layout: # btrfs filesystem defrag $mnt/foobar # sync item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53 generation 7 type 1 (regular) extent data disk byte 298844160 nr 41943040 extent data offset 0 nr 8650752 ram 41943040 extent compression 0 (none) item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53 generation 9 type 1 (regular) extent data disk byte 340787200 nr 33292288 extent data offset 0 nr 33292288 ram 33292288 extent compression 0 (none) item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53 generation 8 type 1 (regular) extent data disk byte 13631488 nr 16384 extent data offset 0 nr 16384 ram 16384 extent compression 0 (none) Note the original 40M extent is still there, but a new 32M extent is created for no benefit at all. [CAUSE] There is an existing check to make sure we won't defrag a large enough extent (the threshold is by default 32M). But the check is using the length to the end of the extent: range_len = em->len - (cur - em->start); /* Skip too large extent */ if (range_len >= extent_thresh) goto next; This means, for the first 8MiB of the extent, the range_len is always smaller than the default threshold, and would not be defragged. But after the first 8MiB, the remaining part would fit the requirement, and be defragged. Such different behavior inside the same extent caused the above problem, and we should avoid different defrag decision inside the same extent. [FIX] Instead of using @range_len, just use @em->len, so that we have a consistent decision among the same file extent. Now with this fix, we won't touch the extent, thus not making it any worse. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 0cb5950f3f3b ("btrfs: fix deadlock when reserving space during defrag") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2024-02-19drm/tests/drm_buddy: fix 32b buildMatthew Auld
Doesn't seem to compile on 32b, presumably due to u64 mod/division. Simplest is to just switch over to u32 here. Also make print modifiers consistent with that. Fixes: a64056bb5a32 ("drm/tests/drm_buddy: add alloc_contiguous test") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240215174431.285069-7-matthew.auld@intel.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-02-19accel/ivpu: Rename VPU to NPU in message stringsJacek Lawrynowicz
VPU was renamed to NPU but due to large overhead of renaming all the sources only user visible messages are being updated. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-9-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Refactor BO creation functionsWachowski, Karol
Rename BO allocate/create functions, so the code is more consistent. There are now two matching buffer creation functions: - ivpu_bo_create_ioctl() - create a BO from user space - ivpu_bo_create() - create a BO from kernel space ivpu_bo_alloc() is now only used to allocate struct ivpu_bo which better matches its name. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-8-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Fix ivpu_reset_engine_fn merge issueJacek Lawrynowicz
ivpu_reset_engine_fn and ivpu_reset_engine_fops were separated during merge so move them back together to keep the file consistent. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-7-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Use lazy allocation for doorbell IDsWachowski, Karol
Reserve/allocate and free doorbells for command queues when needed using xarray. This allows to avoid reserving a doorbell for a contexts that never issues a job. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-6-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Add support for FW boot param system_time_usKrystian Pradzynski
Add support for FW boot API param system_time_us. According to the API description this field should be set to system time in microseconds starting from 1970. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-5-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Update FW API headersJacek Lawrynowicz
Update Boot API to 3.22.0 and JSM API to 3.15.6 Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-4-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Remove legacy firmware nameJacek Lawrynowicz
We are now using NPU IP generation based FW names instead of platform code names, so mtl_vpu.bin can be removed. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-3-jacek.lawrynowicz@linux.intel.com
2024-02-19accel/ivpu: Rename TILE_SKU_BOTH_MTL to TILE_SKU_BOTHJacek Lawrynowicz
Remove legacy postfix from TILE_SKU_BOTH macro. This was missed when renaming MTL to VPU37XX. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240214081305.290108-2-jacek.lawrynowicz@linux.intel.com
2024-02-19ata: ahci_ceva: fix error handling for Xilinx GT PHY supportRadhey Shyam Pandey
Platform clock and phy error resources are not cleaned up in Xilinx GT PHY error path. To fix introduce the function ceva_ahci_platform_enable_resources() which is a customized version of ahci_platform_enable_resources() and inline with SATA IP programming sequence it does: - Assert SATA reset - Program PS GTR phy - Bring SATA by de-asserting the reset - Wait for GT lane PLL to be locked ceva_ahci_platform_enable_resources() is also used in the resume path as the same SATA programming sequence (as in probe) should be followed. Also cleanup the mixed usage of ahci_platform_enable_resources() and custom implementation in the probe function as both are not required. Fixes: 9a9d3abe24bb ("ata: ahci: ceva: Update the driver to support xilinx GT phy") Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-02-19ahci: asm1064: correct count of reported portsAndrey Jr. Melnikov
The ASM1064 SATA host controller always reports wrongly, that it has 24 ports. But in reality, it only has four ports. before: ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst after: ahci 0000:04:00.0: ASM1064 has only four ports ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst Signed-off-by: "Andrey Jr. Melnikov" <temnota.am@gmail.com> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-02-19selftests: bonding: set active slave to primary eth1 specificallyHangbin Liu
In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1]. [ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1 Fix it by setting active slave to primary slave specifically before testing. [1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout Fixes: 481b56e0391e ("selftests: bonding: re-format bond option tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 08:01:28 +0000