Age | Commit message (Collapse) | Author |
|
Older glibc's netinet/in.h may leave IPPROTO_MPTCP undefined when
building ip_local_port_range.c, that leads to "error: use of undeclared
identifier 'IPPROTO_MPTCP'".
Define IPPROTO_MPTCP in such cases, just like in other MPTCP selftests.
Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/netdev/CA+G9fYvGO5q4o_Td_kyQgYieXWKw6ktMa-Q0sBu6S-0y3w2aEQ@mail.gmail.com/
Signed-off-by: Maxim Galaganov <max@internet.ru>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/r/20240209132512.254520-1-max@internet.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently when PF administratively sets VF's MAC address and the VF
is put down (VF tries to delete all MACs) then the MAC is removed
from MAC filters and primary VF MAC is zeroed.
Do not allow untrusted VF to remove primary MAC when it was set
administratively by PF.
Reproducer:
1) Create VF
2) Set VF interface up
3) Administratively set the VF's MAC
4) Put VF interface down
[root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
[root@host ~]# ip link set enp2s0f0v0 up
[root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
[root@host ~]# ip link set enp2s0f0v0 down
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
Fixes: 700bbf6c1f9e ("i40e: allow VF to remove any MAC filter")
Fixes: ceb29474bbbc ("i40e: Add support for VF to specify its primary MAC address")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240208180335.1844996-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When ident_pud_init() uses only gbpages to create identity maps, large
ranges of addresses not actually requested can be included in the
resulting table; a 4K request will map a full GB. On UV systems, this
ends up including regions that will cause hardware to halt the system
if accessed (these are marked "reserved" by BIOS). Even processor
speculation into these regions is enough to trigger the system halt.
Only use gbpages when map creation requests include the full GB page
of space. Fall back to using smaller 2M pages when only portions of a
GB page are included in the request.
No attempt is made to coalesce mapping requests. If a request requires
a map entry at the 2M (pmd) level, subsequent mapping requests within
the same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full
gbpage. Existing usage starts with larger regions and then adds
smaller regions, so this should not have any great consequence.
[ dhansen: fix up comment formatting, simplifty changelog ]
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240126164841.170866-1-steve.wahl%40hpe.com
|
|
Pull documentation fix from Jonathan Corbet:
"A single fix to the kernel_feat extension for a bug that will crash
the docs build in some situations"
* tag 'docs-6.8-fixes2' of git://git.lwn.net/linux:
docs: kernel_feat.py: fix build error for missing files
|
|
On architectures with delay slot, instruction_pointer() may differ
from where exception was triggered.
Use exception_ip we just introduced to search exception tables to
get rid of the problem.
Fixes: 4bce37a68ff8 ("mips/mm: Convert to using lock_mm_and_find_vma()")
Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/75e9fd7b08562ad9b456a5bdaacb7cc220311cc9.camel@xry111.site/
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Clear Cause.BD after we use instruction_pointer_set to override
EPC.
This can prevent exception_epc check against instruction code at
new return address.
It won't be considered as "in delay slot" after epc being overridden
anyway.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
On architectures with delay slot, architecture level instruction
pointer (or program counter) in pt_regs may differ from where
exception was triggered.
Introduce exception_ip hook to invoke architecture code and determine
actual instruction pointer to the exception.
Link: https://lore.kernel.org/lkml/00d1b813-c55f-4365-8d81-d70258e10b16@app.fastmail.com/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
After 'lib: checksum: Use aligned accesses for ip_fast_csum and
csum_ipv6_magic tests' was applied, the test_csum_ipv6_magic unit test
started failing for all mips platforms, both little and bit endian.
Oddly enough, adding debug code into test_csum_ipv6_magic() made the
problem disappear.
The gcc manual says:
"The "memory" clobber tells the compiler that the assembly code performs
memory reads or writes to items other than those listed in the input
and output operands (for example, accessing the memory pointed to by one
of the input parameters)
"
This is definitely the case for csum_ipv6_magic(). Indeed, adding the
'memory' clobber fixes the problem.
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Distinguish between xe_pt and the xe_pt_dir subclass when
allocating and freeing. Also use a fixed-size array for the
xe_pt_dir page entries to make life easier for dynamic range-
checkers. Finally rename the page-directory child pointer array
to "children".
While no functional change, this fixes ubsan splats similar to:
[ 51.463021] ------------[ cut here ]------------
[ 51.463022] UBSAN: array-index-out-of-bounds in drivers/gpu/drm/xe/xe_pt.c:47:9
[ 51.463023] index 0 is out of range for type 'xe_ptw *[*]'
[ 51.463024] CPU: 5 PID: 2778 Comm: xe_vm Tainted: G U 6.8.0-rc1+ #218
[ 51.463026] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[ 51.463027] Call Trace:
[ 51.463028] <TASK>
[ 51.463029] dump_stack_lvl+0x47/0x60
[ 51.463030] __ubsan_handle_out_of_bounds+0x95/0xd0
[ 51.463032] xe_pt_destroy+0xa5/0x150 [xe]
[ 51.463088] __xe_pt_unbind_vma+0x36c/0x9b0 [xe]
[ 51.463144] xe_vm_unbind+0xd8/0x580 [xe]
[ 51.463204] ? drm_exec_prepare_obj+0x3f/0x60 [drm_exec]
[ 51.463208] __xe_vma_op_execute+0x5da/0x910 [xe]
[ 51.463268] ? __drm_gpuvm_sm_unmap+0x1cb/0x220 [drm_gpuvm]
[ 51.463272] ? radix_tree_node_alloc.constprop.0+0x89/0xc0
[ 51.463275] ? drm_gpuva_it_remove+0x1f3/0x2a0 [drm_gpuvm]
[ 51.463279] ? drm_gpuva_remove+0x2f/0xc0 [drm_gpuvm]
[ 51.463283] xe_vm_bind_ioctl+0x1a55/0x20b0 [xe]
[ 51.463344] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 51.463414] drm_ioctl_kernel+0xb6/0x120
[ 51.463416] drm_ioctl+0x287/0x4e0
[ 51.463418] ? __pfx_xe_vm_bind_ioctl+0x10/0x10 [xe]
[ 51.463481] __x64_sys_ioctl+0x94/0xd0
[ 51.463484] do_syscall_64+0x86/0x170
[ 51.463486] ? syscall_exit_to_user_mode+0x7d/0x200
[ 51.463488] ? do_syscall_64+0x96/0x170
[ 51.463490] ? do_syscall_64+0x96/0x170
[ 51.463492] entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 51.463494] RIP: 0033:0x7f246bfe817d
[ 51.463498] Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00
[ 51.463501] RSP: 002b:00007ffc1bd19ad0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 51.463502] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f246bfe817d
[ 51.463504] RDX: 00007ffc1bd19b60 RSI: 0000000040886445 RDI: 0000000000000003
[ 51.463505] RBP: 00007ffc1bd19b20 R08: 0000000000000000 R09: 0000000000000000
[ 51.463506] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc1bd19b60
[ 51.463508] R13: 0000000040886445 R14: 0000000000000003 R15: 0000000000010000
[ 51.463510] </TASK>
[ 51.463517] ---[ end trace ]---
v2
- Fix kerneldoc warning (Matthew Brost)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240209112655.4872-1-thomas.hellstrom@linux.intel.com
|
|
MEM_TRAINING_ENCROACHED_SIZE is for BIST training data. It's
not memory type specific.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, if the abmlevel module parameter is set, it is possible for
user space to override the ABM level at some point after boot. However,
that is undesirable because it means that we aren't respecting the
user's wishes with regard to the level that they want to use. So,
prevent user space from changing the ABM level if the module parameter
is set to a non-auto value.
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since 'adev->dm.dc' in amdgpu_dm_fini() might turn out to be NULL
before the call to dc_enable_dmub_notifications(), check
beforehand to ensure there will not be a possible NULL-ptr-deref
there.
Also, since commit 1e88eb1b2c25 ("drm/amd/display: Drop
CONFIG_DRM_AMD_DC_HDCP") there are two separate checks for NULL in
'adev->dm.dc' before dc_deinit_callbacks() and dc_dmub_srv_destroy().
Clean up by combining them all under one 'if'.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 81927e2808be ("drm/amd/display: Support for DMUB AUX")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Clean up a typo in pr_err() erroneously printing NI MC 'rdev->mc_fw->size'
during SMC firmware load. Log 'rdev->smc_fw->size' instead.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 6596afd48af4 ("drm/radeon/kms: add dpm support for btc (v3)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable support for jpeg_v5_0_0 ip block.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add doorbell for JPEG5
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add PG support for JPEG5
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
'calculate_bandwidth()'
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
link_dp_training_dpia.c
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a97314 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for JPEG5
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable support for vcn_v5_0_0_ip_block
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d037082 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217d7 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VCN_5_0_0 IP init, ring functions, DPG support.
v2: squash in warning fixes (Alex)
v3: squash in block and ring init, boot, doorbell enablement,
DPG support (Alex)
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add VCN5_0_0 firmware support
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: Add vcn v5_0_0 register offset and shift masks
header files. (Hawking)
v2: Update vcn v5_0_0 register offset and shift masks
header files to RE2. (Likun)
v3: Update vcn v5_0_0 register offset and shift masks
header files to RE2.5. (Likun)
v4: Update vcn v5_0_0 register offset and shift masks
header files to RE3. (Likun)
v5: Clean up vcn v5_0_0 ip headers. (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add hdp v7_0 ip block
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add hdp v7_0 ip block support.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: Add hdp v7_0_0 register offset and shift masks
header files (Hawking)
v2: Update hdp v7_0_0 register offset and shift masks
header files for RE2.5 (Likun)
v3: Clean up hdp v7_0_0 ip headers (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ih v7_0 ip block.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ih v7_0 ip block support.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Jpeg DPG support for GC IP v11_5_0
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add ucode id and cmd buffer for jpeg psp sram programming
and Jpeg DPG support.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: Add osssys v7_0_0 register offset and shift masks
header files. (Hawking)
v2: Update osssys v7_0_0 register offset and shift masks
header files to RE2. (Likun)
v3: Update osssys v7_0_0 register offset and shift masks
header files to RE2.5. (Likun)
v4: Clean up osssys v7_0_0 ip headers (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add lsdma v7_0 ip block.
v2: squash in updates (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add lsdma v7_0 ip block support.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: Add lsdma v7_0_0 register offset and shift masks
header files (Hawking)
v2: Update lsdma v7_0_0 register offset and shift masks
header files for RE2.5 (Likun)
v3: Clean up lsdma v7_0_0 ip headers (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
send smu rma reason event to smu in ras eeprom driver.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
implement smu send rma reason function for smu v13.0.6
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add athub v4_1_0 ip block support.
v2: fix clang warning (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
v1: Add athub v4_1_0 register offset and shift masks
header files. (Hawking)
v2: Update athub v4_1_0 register offset and shift masks
header files to RE2. (Likun)
v3: Update athub v4_1_0 register offset and shift masks
header files to RE2.5 (Likun)
v4: Update athub v4_1_0 register offset and shift masks
header files to RE3. (Likun)
v5: Clean up athub v4_1_0 ip headers. (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Support to set fw_load_type=3 to use backdoor
rlc autoload.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Skip ucode BO reservation for backdoor RLC autoload.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Only enable VCN/JPEG dpm when VCN/JPEG PG flag was set
when smu set dpm table.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Its currently incorrectly multiplied by number of XCCs in the partition
Fixes: be457b2252b6 ("drm/amdkfd: Update cache info for GFX 9.4.3")
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Call the 2nd level trap handler if the cwsr handler is entered with any
one of wave_start, wave_end, or trap_after_inst exceptions.
Signed-off-by: Laurent Morichetti <laurent.morichetti@amd.com>
Tested-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The debugger requires the control stack header to be filled in to
update_waves.
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/
Suggested-by: Markus Elfring <Markus.Elfring@web.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Convert path separator to CIFS_DIR_SEP(cifs_sb) from symlink target
before sending it over the wire otherwise the created SMB symlink may
become innaccesible from server side.
Fixes: 514d793e27a3 ("smb: client: allow creating symlinks via reparse points")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When uid, gid and cruid are not specified, we need to dynamically
set them into the filesystem context used for automounting otherwise
they'll end up reusing the values from the parent mount.
Fixes: 9fd29a5bae6e ("cifs: use fs_context for automounts")
Reported-by: Shane Nehring <snehring@iastate.edu>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2259257
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|