summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-12net/wireless: ipw2x00: remove unused definitions for regulatory domainStanislav Yakovlev
ipw2200 driver does not use these defines, it uses geo struct instead. Therefore remove them from its header. Note: we keep them in the ipw2100 driver's header, because the driver still uses them. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ath9k: Add wiphy name to log messages.Ben Greear
On systems with multiple NICs, it's nice to know which one is producing warnings. Here is an example of the new ouput: ath: wiphy0: Failed to stop TX DMA, queues=0x005! Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211_hwsim: Fix set mactime on receiver hwsim radioAshok Nagarajan
The patch "mac80211_hwsim: Add tsf to beacons, probe responses and radiotap header" was setting the mactime on wrong hwsim radio. This patch fixes it. Signed-off-by: Ashok Nagarajan <ashok@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12mac80211: Limit TID buffering during BA session setup/teardownHelmut Schaa
While setting up or tearing down a BA session mac80211 is buffering pending frames for the according TID. However, there's currently no limit on how many frames are buffered possibly leading to an out-of- memory situation. This can happen on systems with little memory when the CPU is fully loaded since the BA session work is executed in process context while frames can still come via softirq. Apply a limitation to the TIDs pending queue to avoid consuming too much memory in this situation. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12cfg80211: Add background scan period attribute.Bala Shanmugam
Receive background scan period as part of connect command and pass the same to the driver. Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ath9k: Fix BTCOEX shutdownSujith Manoharan
Flush MCI profiles only if MCI is being actually used. This fixes a panic on driver unload when non-MCI devices are being used and btcoex_enable is set. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa06296d2>] ath_mci_flush_profile+0x12/0x100 [ath9k] Call Trace: [<ffffffffa061befe>] ath9k_stop_btcoex+0x5e/0x80 [ath9k] [<ffffffffa061ed57>] ath9k_stop+0xb7/0x230 [ath9k] [<ffffffffa0533f30>] ieee80211_stop_device+0x50/0x180 [mac80211] [<ffffffffa051f0cf>] ieee80211_do_stop+0x2af/0x6a0 [mac80211] [<ffffffffa051f4da>] ieee80211_stop+0x1a/0x20 [mac80211] [<ffffffff81365d96>] __dev_close_many+0x86/0xe0 [<ffffffff81365ee0>] dev_close_many+0xa0/0x110 [<ffffffff81366038>] rollback_registered_many+0xe8/0x260 [<ffffffff813661cb>] unregister_netdevice_many+0x1b/0x80 [<ffffffffa051e950>] ieee80211_remove_interfaces+0xd0/0x110 [mac80211] [<ffffffffa050c133>] ieee80211_unregister_hw+0x53/0x120 [mac80211] [<ffffffffa061d5a4>] ath9k_deinit_device+0x44/0x70 [ath9k] [<ffffffffa062c1d4>] ath_pci_remove+0x54/0xa0 [ath9k] [<ffffffff81267c46>] pci_device_remove+0x46/0x110 [<ffffffff8131021c>] __device_release_driver+0x7c/0xe0 [<ffffffff81310960>] driver_detach+0xd0/0xe0 [<ffffffff81310078>] bus_remove_driver+0x88/0xe0 [<ffffffff81311122>] driver_unregister+0x62/0xa0 [<ffffffff81268004>] pci_unregister_driver+0x44/0xc0 [<ffffffffa062c8b5>] ath_pci_exit+0x15/0x20 [ath9k] [<ffffffffa063205d>] ath9k_exit+0x15/0x31 [ath9k] [<ffffffff810b92cc>] sys_delete_module+0x18c/0x270 [<ffffffff814373dd>] ? retint_swapgs+0x13/0x1b [<ffffffff8124828e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff81437de9>] system_call_fastpath+0x16/0x1b Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12ASoC: wm8994: Prevent ABBA deadlock with CODEC and accdet mutexesMark Brown
Currently we can the accdet mutex from within DAPM when updating the device state which means we take accdet then the CODEC mutex but we also do the locking the other way around when responding to the jackdet IRQ. Move all the jackdet use of the CODEC mutex out of the accdet lock to avoid this. Since all the DAPM interactions depend only on a single threaded IRQ this is still serialised. The locking improvements in 3.5 allow a better solution there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-12rt2x00: fix random stallsStanislaw Gruszka
Is possible that we stop queue and then do not wake up it again, especially when packets are transmitted fast. That can be easily reproduced with modified tx queue entry_num to some small value e.g. 16. If mac80211 already hold local->queue_stop_reason_lock, then we can wait on that lock in both rt2x00queue_pause_queue() and rt2x00queue_unpause_queue(). After drooping ->queue_stop_reason_lock is possible that __ieee80211_wake_queue() will be performed before __ieee80211_stop_queue(), hence we stop queue and newer wake up it again. Another race condition is possible when between rt2x00queue_threshold() check and rt2x00queue_pause_queue() we will process all pending tx buffers on different cpu. This might happen if for example interrupt will be triggered on cpu performing rt2x00mac_tx(). To prevent race conditions serialize pause/unpause by queue->tx_lock. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12iwl3945: fix possible il->txq NULL pointer dereference in delayed worksStanislaw Gruszka
On il3945_down procedure we free tx queue data and nullify il->txq pointer. After that we drop mutex and then cancel delayed works. There is possibility, that after drooping mutex and before the cancel, some delayed work will start and crash while trying to send commands to the device. For example, here is reported crash in il3945_bg_reg_txpower_periodic(): https://bugzilla.kernel.org/show_bug.cgi?id=42766#c10 Patch fix problem by adding il->txq check on works that send commands, hence utilize tx queue. Reported-by: Clemens Eisserer <linuxhippy@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-03-12hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776FGuenter Roeck
NCT6775F and NCT6776F have their own set of registers for FAN_STOP_TIME. The correct registers were used to read FAN_STOP_TIME, but writes used the wrong registers. Fix it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare <khali@linux-fr.org>
2012-03-12regulator: Support driver probe deferralMark Brown
If we fail to locate a requested regulator return -EPROBE_DEFER. If drivers pass this error code through to their caller (which they really should) then this will ensure that the probe is retried later when further devices become available. In the unusual case where a driver doesn't want this it can override the default behaviour. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12SUNRPC: Don't use variable length automatic arrays in kernel codeTrond Myklebust
Replace the variable length array in the RPCSEC_GSS crypto code with a fixed length one. The size should be bounded by the variable GSS_KRB5_MAX_BLOCKSIZE, so use that. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-12vt: NULL dereference in vt_do_kdsk_ioctl()Dan Carpenter
We forgot to set the "key_map" variable here, so it's still NULL. This was introduced recently in 079c9534a9 "vt:tackle kbd_table". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12tty: serial: vt8500: fix annotations for probe/removeWolfram Sang
Fixes: WARNING: drivers/tty/serial/built-in.o(.data+0x30): Section mismatch in reference from the variable vt8500_platform_driver to the function .init.text:vt8500_serial_probe() The variable vt8500_platform_driver references the function __init vt8500_serial_probe() And mark the remove pointer while we are here. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12NFS: Check return value from rpc_queue_upcall()Bryan Schumaker
This function could fail to queue the upcall if rpc.idmapd is not running, causing a warning message to be printed. Instead, I want to check the return value and revoke the key if the upcall can't be run. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-12NFS: Only define some function when v4.1 is enabledBryan Schumaker
Now that the nfs4_cb_match_client() function is static, gcc notices that it is only used when CONFIG_NFS_V4_1 is enabled. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-03-12usb: host: xhci: use __ffs() instead of hardcoding shiftFelipe Balbi
__ffs() can tell us which is the SEGMENT_SHIFT value to be used. This will prevent problems when users are too fast and don't pay attention to the need of fixing the Shift after changing TRBS_PER_SEGMENT. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12xHCI: BESL calculation based on USB2.0 LPM errataAndiry Xu
The latest released errata for USB2.0 ECN LPM adds new fields to USB2.0 extension descriptor, defines two BESL values for device: baseline BESL and deep BESL. Baseline BESL value communicates a nominal power savings design point and the deep BESL value communicates a significant power savings design point. If device indicates BESL value, driver will use a value count in both host BESL and device BESL. Use baseline BESL value as default. Signed-off-by: Andiry Xu <andiry.xu@amd.com> Tested-by: Jason Fan <jcfan@qca.qualcomm.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-03-12workqueue: use percpu allocator for cwq on UPLai Jiangshan
I notice that the commit bbddff makes percpu allocator can work on UP, So we don't need the magic way for UP. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2012-03-12Merge 3.3-rc7 into usb-nextGreg Kroah-Hartman
This resolves the conflict with drivers/usb/host/ehci-fsl.h that happened with changes in Linus's and this branch at the same time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-12HID: wacom: Reset stylus buttons - Intuos4 WLPrzemo Firszt
Stylus buttons have to be resetted when going out-of-prox. Signed-off-by: Przemo Firszt <przemo@firszt.eu> Reviewed-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-12panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()Xi Wang
num_sifr could go negative since acpi_pcc_get_sqty() returns -EINVAL on error. Then it could bypass the sanity check (num_sifr > 255). The subsequent call to kzalloc() would allocate a small buffer, leading to a memory corruption. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-12acer-wmi: No wifi rfkill on Lenovo machinesIke Panhc
We have several reports which says acer-wmi is loaded on ideapads and register rfkill for wifi which can not be unblocked. Since ideapad-laptop also register rfkill for wifi and it works reliably, it will be fine acer-wmi is not going to register rfkill for wifi once VPC2004 is found. Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no wifi rfkill capability, there are reports which says acer-wmi also block wireless on Thinkpad E520/E420. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-12Fujitsu tablet extras driverRobert Gerlach
This patch adds support for some of the devices within a wide variety of Fujitsu Tablet Computers, both convertibles and slates. Primarily it allows for the automatic detection of the tablet/notebook mode for convertible tablet pc's, and orientation for docked slates. It also adds support for the application panel buttons usually found next to the tablet screen, and docking station detection for slates. Signed-off-by: Robert Gerlach <khnz@gmx.de> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-12x86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptopsBen Hutchings
An rfkill driver based on the fsaa1655g and fsam7440 drivers for Fujitsu-Siemens Amilo A1655 and M7440 models found at: http://sourceforge.net/projects/fsaa1655g/ http://sourceforge.net/projects/fsam7440/ This adds DMI matching, replaces the procfs files with rfkill devices, and uses the proper functions to write to the i8042 safely. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Matthew Garrett <mjg@redhat.com>
2012-03-12ALSA: hda - Add EAPD control to Conexnat auto-parserTakashi Iwai
Added the vmaster hook for controlling EAPD dynamically to Conexant auto-parser. When the Master is muted, EAPDs are turned off as well. This will fix the missing mute-LED control on some machines in addition to the more power-saving in the auto-parser mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ALSA: hda - Rewrite the mute-LED control with vmaster hook for ALC269Takashi Iwai
We've had ugly static handling of the mute-LED with a powersave hook for ALC269 HP laptops just like done in patch_sigmatel.c. This is now rewritten with the new vmaster hook and a fixup code. For that, the new fixup action, ALC_FIXUP_ACT_BUILD, is introduced. It's called after build_controls is called. The reason of this new action is that vmaster hook must be added at this stage (not in init or probe). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ALSA: hda - Rewrite the mute-LED hook with vmaster hook in patch_sigmatel.cTakashi Iwai
The mute-LED is controlled in patch_sigmatel.c by (ab-)using the powersave hook. This can be now rewritten with the vmaster hook instead, which is much simpler and can work even without CONFIG_SND_HDA_POWER_SAVE kconfig. A drawback is that the mute-LED corresponds _only_ to the Master mixer switch instead of checking the whole DACs. But usually this shouldn't be a big problem as PA enables the mixer elements accordingly. Also, this patch changes the code to create vmaster always even on STAC9200 and STAC925x. The former "Master" on these chips are renamed as "PCM" now. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ALSA: hda - Return the created kcontrol in __snd_hda_add_vmaster()Takashi Iwai
It'll be used for adding hooks in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-03-12ASoC: OMAP: Build config cleanup for McBSPPeter Ujfalusi
The McBSP driver stack has been moved, and rewritten resulting a single driver - selected by CONFIG_SND_OMAP_SOC_MCBSP. There is no longer need to have CONFIG_OMAP_MCBSP anymore. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonoie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP: Remove CONFIG_OMAP_MCBSP referencesPeter Ujfalusi
The McBSP driver stack has been moved to ASoC. The CONFIG_OMAP_MCBSP will be removed since the CONFIG_SND_OMAP_SOC_MCBSP will trigger to build the McBSP (audio) drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: fix snd_pcm_hw_rule_add argumentsGrazvydas Ignotas
We are setting SNDRV_PCM_HW_PARAM_BUFFER_SIZE based on SNDRV_PCM_HW_PARAM_CHANNELS, not vice versa. This bug didn't have much impact because the rules are evaluated multiple times by the core, and intended value got set eventually. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Correct clock muxing for CLKR/FSR signalsPeter Ujfalusi
Remove the no longer valid check for McBSP1 regarding to signal mux selection (on OMAP4 McBSP4 has 6 pin setup). Only clear the srgr2, pcr0 register configuration if the requested clock configuration will actually going to touch it. In this way we can avoid issues if the CLKR/FSR mux has been configured after the clock selection. We are going to check for the valid McBSP port in the omap_mcbsp_6pin_src_mux() function based on the validity of the mux_signal callback (which is only valid for ports having 6 pin setup). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Single function CLKR/FSR source mux configurationPeter Ujfalusi
Use single function for the CLKR/FSR mux configuration. OMAP2/3 has 6 pin configuration on McBSP1 instance, while on OMAP4 McBSP4 instance have the 6 pin configuration so the omap2_mcbsp1_mux_* is not correct name for all support OMAP versions Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM/ASoC: OMAP McBSP: Move remainig defines from arch to ASoC headerPeter Ujfalusi
Clock signal muxing, and functional clock related defines are only needed in ASoC drivers. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Mark Brown <broonoie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP2+: McBSP: Correct CLKR/FSR clock source mux configurationPeter Ujfalusi
On OMAP2/3 McBSP1 port has 6 pin setup, while on OMAP4 the port is McBSP4. Implement the CLKR/FSR clock mux selection for OMAP4, and make sure that we add the correct callback for the correct port across supported OMAP versions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap McBSP: Clear rx_irq at probe time for OMAP4Peter Ujfalusi
On OMAP4 we have one interrupt line per McBSP port. At probe time tx, and rx irq value will be -ENXIO, and only the tx irq will get corrected. In omap_mcbsp_request if the rx_irq is not 0 we proceed, and try to request the interrupt, which will fail on OMAP4 (rx_irq == -6). To avoid this error, clear the rx_irq at probe time on OMAP4. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: When closing the port select PRCM source for CLKS signalPeter Ujfalusi
If external source for the CLKS signal selection kept after the port is no longer in use the system might refuse to go suspend. There is also a chance that the external clock is not running when next time the McBSP port is started which can result errors when we try to access McBSP registers. Reset the CLKS source back to PRCM source unconditionally. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Configure wakeup in later phasePeter Ujfalusi
Configure the WAKEUPEN register at the same time we configure the rest of the McBSP registers. In case of OMAP3+, if the sysclock has been reconfigured we are going to disable McBSP for the duration of the clock change, which will reset the McBSP registers. The WAKEUPEN register need to be configured later, so the changes will be effective during runtime. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicrocom> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Remove redundant checks for the st_data pointerPeter Ujfalusi
The parent functions of omap_st_start/stop also checks the validity of the st_data pointer so we do not need to do it again inside of omap_st_start/stop Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap: mcbsp: Use uniform st_data pointer initializationPeter Ujfalusi
In this way we can save few lines, and have uniform way of initializing the st_data in all functions. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Simplify DMA configurationPeter Ujfalusi
Configure the DMA request line, port address, and stream name at probe time instead of every time we start a stream. These settings are static in the system. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Merge the omap_mcbsp_data into omap_mcbsp structurePeter Ujfalusi
Since the drivers has been merged, merge the two structures together. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Cleanup of module probe/remove codePeter Ujfalusi
Use devm_* where it is possible to save on cleanup path. Start merging the two mcbsp file content. Move pm_runtime_enable/disable calls to ASoC probe, remove from module probe/remove time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP McBSP: Remove redundant accessorsPeter Ujfalusi
We no longer need accessor functions for max_tx/rx_threshold, dma_op_mode or for the FIFO size. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP: mcbsp.h: Clean up bit definitionsPeter Ujfalusi
Use BIT() for bit position, correct field definition by adding mask to them, and also adding the missing spaces around '<<' Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ARM: OMAP: Do not register omap-mcbsp-dai devicePeter Ujfalusi
The driver for omap-mcbsp-dai no longer exist since it has been merged with the omap-mcbsp driver. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: omap-mcbsp: Create a single driver for McBSPPeter Ujfalusi
The OMAP McBSP driver stack used to contain two different drivers. One of them was used as kind low-level access to the IP, while the other driver was the ASoC DAI driver. There were global, shared structures, in different places, the McBSP instances are reffered with id numbers (sometimes 0 based, in other cases 1 based id numbers). Create one single driver for OMAP McBSP with name: omap-mcbsp. Convert the old omap-mcbsp driver initially to be a library for the omap-mcbsp DAI driver. With this change we can get rid of all global variables, structures. Further cleanup is coming... Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12ASoC: OMAP: McBSP: Consolidate plat/mcbsp.h contentPeter Ujfalusi
Move most of the content of the plat/mcbsp.h header file under sound/soc/omap/ to help further cleanups. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
2012-03-12OMAP: mcbsp: Move core driver under sound/soc/omapPeter Ujfalusi
In order to consolidate the McBSP driver move it out from arch/arm/plat-omap directory under sound/soc/omap/ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Liam Girdwood <lrg@ti.com>
generated by cgit (git 2.34.1) at 2025-09-22 14:46:05 +0000