| Age | Commit message (Collapse) | Author |
|---|
|
pginodesteal is supposed to capture the impact that inode reclaim has on
the page cache state. Currently, it doesn't consider shadow pages that
get dropped this way, even though this can have a significant impact on
paging behavior, memory pressure calculations etc.
To improve visibility into these effects, make sure shadow pages get
counted when they get dropped through inode reclaim.
This changes the return value semantics of invalidate_mapping_pages()
semantics slightly, but the only two users are the inode shrinker itsel
and a usb driver that logs it for debugging purposes.
Link: https://lkml.kernel.org/r/20210614211904.14420-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When drop_caches truncates the page cache in an inode it also includes any
shadow entries for evicted pages. However, there is a preliminary check
on whether the inode has pages: if it has *only* shadow entries, it will
skip running truncation on the inode and leave it behind.
Fix the check to mapping_empty(), such that it runs truncation on any
inode that has cache entries at all.
Link: https://lkml.kernel.org/r/20210614211904.14420-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The page cache deletion paths all have interrupts enabled, so no need to
use irqsafe/irqrestore locking variants.
They used to have irqs disabled by the memcg lock added in commit
c4843a7593a9 ("memcg: add per cgroup dirty page accounting"), but that has
since been replaced by memcg taking the page lock instead, commit
0a31bc97c80c ("mm: memcontrol: rewrite uncharge AP").
Link: https://lkml.kernel.org/r/20210614211904.14420-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We do some unlocked reads of writeback statistics like
avg_write_bandwidth, dirty_ratelimit, or bw_time_stamp. Generally we are
fine with getting somewhat out-of-date values but actually getting
different values in various parts of the functions because the compiler
decided to reload value from original memory location could confuse
calculations. Use READ_ONCE for these unlocked accesses and WRITE_ONCE
for the updates to be on the safe side.
Link: https://lkml.kernel.org/r/20210713104716.22868-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Rename domain_update_bandwidth() to domain_update_dirty_limit(). The
original name is a misnomer. The function has nothing to do with a
bandwidth, it updates dirty limits.
Link: https://lkml.kernel.org/r/20210713104716.22868-4-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Michael Stapelberg has reported that for workload with short big spikes of
writes (GCC linker seem to trigger this frequently) the write throughput
is heavily underestimated and tends to steadily sink until it reaches
zero. This has rather bad impact on writeback throttling (causing
stalls). The problem is that writeback throughput estimate gets updated
at most once per 200 ms. One update happens early after we submit pages
for writeback (at that point writeout of only small fraction of pages is
completed and thus observed throughput is tiny). Next update happens only
during the next write spike (updates happen only from inode writeback and
dirty throttling code) and if that is more than 1s after previous spike,
we decide system was idle and just ignore whatever was written until this
moment.
Fix the problem by making sure writeback throughput estimate is also
updated shortly after writeback completes to get reasonable estimate of
throughput for spiky workloads.
[jack@suse.cz: avoid division by 0 in wb_update_dirty_ratelimit()]
Link: https://lore.kernel.org/lkml/20210617095309.3542373-1-stapelberg+linux@google.com
Link: https://lkml.kernel.org/r/20210713104716.22868-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Michael Stapelberg <stapelberg+linux@google.com>
Tested-by: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we trigger writeback bandwidth estimation from
balance_dirty_pages() and from wb_writeback(). However neither of these
need to trigger when the system is relatively idle and writeback is
triggered e.g. from fsync(2). Make sure writeback estimates happen
reliably by triggering them from do_writepages().
Link: https://lkml.kernel.org/r/20210713104716.22868-2-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "writeback: Fix bandwidth estimates", v4.
Fix estimate of writeback throughput when device is not fully busy doing
writeback. Michael Stapelberg has reported that such workload (e.g.
generated by linking) tends to push estimated throughput down to 0 and as
a result writeback on the device is practically stalled.
The first three patches fix the reported issue, the remaining two patches
are unrelated cleanups of problems I've noticed when reading the code.
This patch (of 4):
Track number of inodes under writeback for each bdi_writeback structure.
We will use this to decide whether wb does any IO and so we can estimate
its writeback throughput. In principle we could use number of pages under
writeback (WB_WRITEBACK counter) for this however normal percpu counter
reads are too inaccurate for our purposes and summing the counter is too
expensive.
Link: https://lkml.kernel.org/r/20210713104519.16394-1-jack@suse.cz
Link: https://lkml.kernel.org/r/20210713104716.22868-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Print NR_KERNEL_MISC_RECLAIMABLE stat from show_free_areas() so users can
check whether the shrinker is working correctly and to show the current
memory usage.
Link: https://lkml.kernel.org/r/20210813104725.4562-1-liuhailong@oppo.com
Signed-off-by: liuhailong <liuhailong@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A recent lockdep report included these lines:
[ 96.177910] 3 locks held by containerd/770:
[ 96.177934] #0: ffff88810815ea28 (&mm->mmap_lock#2){++++}-{3:3},
at: do_user_addr_fault+0x115/0x770
[ 96.177999] #1: ffffffff82915020 (rcu_read_lock){....}-{1:2}, at:
get_swap_device+0x33/0x140
[ 96.178057] #2: ffffffff82955ba0 (fs_reclaim){+.+.}-{0:0}, at:
__fs_reclaim_acquire+0x5/0x30
While it was not useful to that bug report to know where the reclaim lock
had been acquired, it might be useful under other circumstances. Allow
the caller of __fs_reclaim_acquire to specify the instruction pointer to
use.
Link: https://lkml.kernel.org/r/20210719185709.1755149-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In page table entry modifying tests, set_xxx_at() are used to populate
the page table entries. On ARM64, PG_arch_1 (PG_dcache_clean) flag is
set to the target page flag if execution permission is given. The logic
exits since commit 4f04d8f00545 ("arm64: MMU definitions"). The page
flag is kept when the page is free'd to buddy's free area list. However,
it will trigger page checking failure when it's pulled from the buddy's
free area list, as the following warning messages indicate.
BUG: Bad page state in process memhog pfn:08000
page:0000000015c0a628 refcount:0 mapcount:0 \
mapping:0000000000000000 index:0x1 pfn:0x8000
flags: 0x7ffff8000000800(arch_1|node=0|zone=0|lastcpupid=0xfffff)
raw: 07ffff8000000800 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag(s) set
This fixes the issue by clearing PG_arch_1 through flush_dcache_page()
after set_xxx_at() is called. For architectures other than ARM64, the
unexpected overhead of cache flushing is acceptable.
Link: https://lkml.kernel.org/r/20210809092631.1888748-13-gshan@redhat.com
Fixes: a5c3b9ffb0f4 ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The variables used by old implementation isn't needed as we switched to
"struct pgtable_debug_args". Lets remove them and related code in
debug_vm_pgtable().
Link: https://lkml.kernel.org/r/20210809092631.1888748-12-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
tests
This uses struct pgtable_debug_args in PGD/P4D modifying tests. No
allocated huge page is used in these tests. Besides, the unused variable
@saved_p4dp and @saved_pudp are dropped.
Link: https://lkml.kernel.org/r/20210809092631.1888748-11-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in PUD modifying tests. The allocated
huge page is used when set_pud_at() is used. The corresponding tests are
skipped if the huge page doesn't exist. Besides, the following unused
variables in debug_vm_pgtable() are dropped: @prot, @paddr, @pud_aligned.
Link: https://lkml.kernel.org/r/20210809092631.1888748-10-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in PMD modifying tests. The allocated
huge page is used when set_pmd_at() is used. The corresponding tests are
skipped if the huge page doesn't exist. Besides, the unused variable
@pmd_aligned in debug_vm_pgtable() is dropped.
Link: https://lkml.kernel.org/r/20210809092631.1888748-9-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in PTE modifying tests. The allocated
page is used as set_pte_at() is used there. The tests are skipped if the
allocated page doesn't exist. It's notable that args->ptep need to be
mapped before the tests. The reason why we don't map args->ptep at the
beginning is PTE entry is only mapped and accessible in atomic context
when CONFIG_HIGHPTE is enabled. So we avoid to do that so that atomic
context is only enabled if needed.
Besides, the unused variable @pte_aligned and @ptep in debug_vm_pgtable()
are dropped.
Link: https://lkml.kernel.org/r/20210809092631.1888748-8-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in the migration and thp test
functions. It's notable that the pre-allocated page is used in
swap_migration_tests() as set_pte_at() is used there.
Link: https://lkml.kernel.org/r/20210809092631.1888748-7-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in the soft_dirty and swap test
functions.
Link: https://lkml.kernel.org/r/20210809092631.1888748-6-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in protnone and devmap test functions.
After that, the unused variable @protnone in debug_vm_pgtable() is
dropped.
Link: https://lkml.kernel.org/r/20210809092631.1888748-5-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in the leaf and savewrite test
functions.
Link: https://lkml.kernel.org/r/20210809092631.1888748-4-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This uses struct pgtable_debug_args in the basic test functions. The
unused variables @pgd_aligned and @p4d_aligned in debug_vm_pgtable() are
dropped.
Link: https://lkml.kernel.org/r/20210809092631.1888748-3-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/debug_vm_pgtable: Enhancements", v6.
There are a couple of issues with current implementations and this series
tries to resolve the issues:
(a) All needed information are scattered in variables, passed to various
test functions. The code is organized in pretty much relaxed fashion.
(b) The page isn't allocated from buddy during page table entry modifying
tests. The page can be invalid, conflicting to the implementations
of set_xxx_at() on ARM64. The target page is accessed so that the
iCache can be flushed when execution permission is given on ARM64.
Besides, the target page can be unmapped and accessing to it causes
kernel crash.
"struct pgtable_debug_args" is introduced to address issue (a). For issue
(b), the used page is allocated from buddy in page table entry modifying
tests. The corresponding tets will be skipped if we fail to allocate the
(huge) page. For other test cases, the original page around to kernel
symbol (@start_kernel) is still used.
The patches are organized as below. PATCH[2-10] could be combined to one
patch, but it will make the review harder:
PATCH[1] introduces "struct pgtable_debug_args" as place holder of all
needed information. With it, the old and new implementation
can coexist.
PATCH[2-10] uses "struct pgtable_debug_args" in various test functions.
PATCH[11] removes the unused code for old implementation.
PATCH[12] fixes the issue of corrupted page flag for ARM64
This patch (of 6):
In debug_vm_pgtable(), there are many local variables introduced to track
the needed information and they are passed to the functions for various
test cases. It'd better to introduce a struct as place holder for these
information. With it, what the tests functions need is the struct. In
this way, the code is simplified and easier to be maintained.
Besides, set_xxx_at() could access the data on the corresponding pages in
the page table modifying tests. So the accessed pages in the tests should
have been allocated from buddy. Otherwise, we're accessing pages that
aren't owned by us. This causes issues like page flag corruption or
kernel crash on accessing unmapped page when CONFIG_DEBUG_PAGEALLOC is
enabled.
This introduces "struct pgtable_debug_args". The struct is initialized
and destroyed, but the information in the struct isn't used yet. It will
be used in subsequent patches.
Link: https://lkml.kernel.org/r/20210809092631.1888748-1-gshan@redhat.com
Link: https://lkml.kernel.org/r/20210809092631.1888748-2-gshan@redhat.com
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> [powerpc 8xx]
Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> [s390]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use BUG_ON instead of a if condition followed by BUG.
Generated by: scripts/coccinelle/misc/bugon.cocci
Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2107061049150.7197@hadrien
Fixes: 7d37cb2c912d ("lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS")
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Usually, ocfs2_downconvert_lock() function always downconverts dlm lock to
the expected level for satisfy dlm bast requests from the other nodes.
But there is a rare situation. When dlm lock conversion is being
canceled, ocfs2_downconvert_lock() function will return -EBUSY. You need
to be aware that ocfs2_cancel_convert() function is asynchronous in fsdlm
implementation.
If we does not requeue this lockres entry, ocfs2 downconvert thread no
longer handles this dlm lock bast request. Then, the other nodes will not
get the dlm lock again, the current node's process will be blocked when
acquire this dlm lock again.
Link: https://lkml.kernel.org/r/20210830044621.12544-1-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_local_read_info()
A memory block is allocated through kmalloc(), and its return value is
assigned to the pointer oinfo. However, oinfo->dqi_gqinode is not
initialized but it is accessed in:
iput(oinfo->dqi_gqinode);
To fix this possible uninitialized-variable access, assign NULL to
oinfo->dqi_gqinode, and add ocfs2_qinfo_lock_res_init() behind the
assignment in ocfs2_local_read_info(). Remove ocfs2_qinfo_lock_res_init()
in ocfs2_global_read_info().
Link: https://lkml.kernel.org/r/20210804031832.57154-1-islituo@gmail.com
Signed-off-by: Tuo Li <islituo@gmail.com>
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The case where "tmp_oh" is NULL is handled at the start of the function.
At this point we know it's non-NULL so this will always return 1.
Link: https://lkml.kernel.org/r/YOcItgIXtisi3MaO@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Larry Chen <lchen@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit f62800992e5917f2 ("ia64: switch to NO_BOOTMEM") removed the last
user of num_rsvd_regions outside arch/ia64/kernel/setup.c.
Link: https://lkml.kernel.org/r/a377b5437e3e9da93d02f996fe06a2b956cb0990.1629884459.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Jay Lan <jlan@sgi.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There never was a reason for reserve_elfcorehdr() to be global. Make the
function static, and move it before its sole caller.
Link: https://lkml.kernel.org/r/fe236cd73b64abc4abd03dd808cb015c907f4c8c.1629884459.git.geert+renesas@glider.be
Fixes: cee87af2a5f75713 ("[IA64] kexec: Use EFI_LOADER_DATA for ELF core header")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Jay Lan <jlan@sgi.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Simon Horman <horms@verge.net.au>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "ia64: Miscellaneous fixes and cleanups".
This patch series contains some miscellaneous fixes and cleanups for ia64.
The second patch fixes a naming conflict triggered by a patch for the FDT
code.
This patch (of 3):
The definition of reserve_elfcorehdr() depends on CONFIG_CRASH_DUMP, not
CONFIG_PROC_VMCORE.
Link: https://lkml.kernel.org/r/cover.1629884459.git.geert+renesas@glider.be
Link: https://lkml.kernel.org/r/77b4c0648f200cab7e1c2c5171c06763e09362aa.1629884459.git.geert+renesas@glider.be
Fixes: d9a9855d0b06ca6d ("always reserve elfcore header memory in crash kernel")
Fixes: 17c1f07ed70afa4f ("[IA64] Reserve elfcorehdr memory in CONFIG_CRASH_DUMP")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms@verge.net.au>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jay Lan <jlan@sgi.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
s/when when/when/
Link: https://lkml.kernel.org/r/20210817112500.12848-1-wangborong@cdjrlc.com
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kernel v5.14 has various changes to optimize unaligned memory accesses,
e.g. commit 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers").
Those changes triggered an unalignment-exception and thus crashed the
bootloader on parisc because the unaligned "output_len" variable now suddenly
was read word-wise while it was read byte-wise in the past.
Fix this issue by declaring the external output_len variable as char which then
forces the compiler to generate byte-accesses.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: John David Anglin <dave.anglin@bell.net>
Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102162
Fixes: 8c031ba63f8f ("parisc: Unbreak bootloader due to gcc-7 optimizations")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Cc: <stable@vger.kernel.org> # v5.14+
|
|
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
|
|
__arch_swab64() functions
No need to keep those as inline assembly functions, the compiler now
generates the same or even better optimized code.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Pull rdma updates from Jason Gunthorpe:
"This is quite a small cycle, no major series stands out. The HNS and
rxe drivers saw the most activity this cycle, with rxe being broken
for a good chunk of time. The significant deleted line count is due to
a SPDX cleanup series.
Summary:
- Various cleanup and small features for rtrs
- kmap_local_page() conversions
- Driver updates and fixes for: efa, rxe, mlx5, hfi1, qed, hns
- Cache the IB subnet prefix
- Rework how CRC is calcuated in rxe
- Clean reference counting in iwpm's netlink
- Pull object allocation and lifecycle for user QPs to the uverbs
core code
- Several small hns features and continued general code cleanups
- Fix the scatterlist confusion of orig_nents/nents introduced in an
earlier patch creating the append operation"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (90 commits)
RDMA/mlx5: Relax DCS QP creation checks
RDMA/hns: Delete unnecessary blank lines.
RDMA/hns: Encapsulate the qp db as a function
RDMA/hns: Adjust the order in which irq are requested and enabled
RDMA/hns: Remove RST2RST error prints for hw v1
RDMA/hns: Remove dqpn filling when modify qp from Init to Init
RDMA/hns: Fix QP's resp incomplete assignment
RDMA/hns: Fix query destination qpn
RDMA/hfi1: Convert to SPDX identifier
IB/rdmavt: Convert to SPDX identifier
RDMA/hns: Bugfix for incorrect association between dip_idx and dgid
RDMA/hns: Bugfix for the missing assignment for dip_idx
RDMA/hns: Bugfix for data type of dip_idx
RDMA/hns: Fix incorrect lsn field
RDMA/irdma: Remove the repeated declaration
RDMA/core/sa_query: Retry SA queries
RDMA: Use the sg_table directly and remove the opencoded version from umem
lib/scatterlist: Fix wrong update of orig_nents
lib/scatterlist: Provide a dedicated function to support table append
RDMA/hns: Delete unused hns bitmap interface
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- Fix in i2c-hid driver for Elan touchpad quirk regression (Jim
Broadus)
- Quirk preventing ASUS Claymore from accidentally suspending whole
system (Luke D. Jones)
- Updates to the existing FW reporting mechanism, MP2 FW status checks,
adding proper power management support for amd-sfh (Basavaraj
Natikar)
- Regression fix for an issue in HID core that got uncovered by recent
USB core cleanup leading to issues when transfer_buffer_length is not
in line with wLength (Alan Stern)
- Memory leak fix in USB HID core (Anirudh Rayabharam)
- Improvement of stylus battery reporting (Dmitry Torokhov)
- Power management improvement for Goodix driver (Douglas Anderson)
- High-resolution scroll support for Magicmouse devices (José Expósito)
- Support for GHLive PS4 dongles (Daniel Nguyen)
- Support proper EV_MSC emissions to hid-apple (Vincent Lefevre)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits)
HID: usbhid: Simplify code in hid_submit_ctrl()
HID: usbhid: Fix warning caused by 0-length input reports
HID: usbhid: Fix flood of "control queue full" messages
HID: sony: Fix more ShanWan clone gamepads to not rumble when plugged in.
HID: sony: support for the ghlive ps4 dongles
HID: thrustmaster: clean up Makefile and adapt quirks
HID: i2c-hid: Fix Elan touchpad regression
HID: asus: Prevent Claymore sending suspend event
HID: amd_sfh: Add dyndbg prints for debugging
HID: amd_sfh: Add support for PM suspend and resume
HID: amd_sfh: Move hid probe after sensor is enabled
HID: amd_sfh: Add command response to check command status
HID: amd_sfh: Fix period data field to enable sensor
HID: logitech-hidpp: battery: provide CAPACITY property for newer devices
HID: thrustmaster: Fix memory leak in thrustmaster_interrupts()
HID: thrustmaster: Fix memory leak in remove
HID: thrustmaster: Fix memory leaks in probe
HID: elo: update the reference count of the usb device structure
HID: logitech-hidpp: Use 'atomic_inc_return' instead of hand-writing it
HID: apple: Add missing scan code event for keys handled by hid-apple
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.15 kernel cycle, no
core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML"
* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
pinctrl: samsung: Add Exynos850 SoC specific data
dt-bindings: pinctrl: samsung: Add Exynos850 doc
MAINTAINERS: Add maintainers for amd-pinctrl driver
pinctrl: Add Intel Keem Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
dt-bindings: mediatek: convert pinctrl to yaml
arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
pinctrl: ingenic: Add .max_register in regmap_config
pinctrl: ingenic: Fix bias config for X2000(E)
pinctrl: ingenic: Fix incorrect pull up/down info
pinctrl: Ingenic: Add pinctrl driver for X2100.
dt-bindings: pinctrl: Add bindings for Ingenic X2100.
pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
pinctrl: Ingenic: Improve the code.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Nothing changed in the clk framework core this time around. We did get
some updates to the basic clk types to use determine_rate for the
divider type and add a power of two fractional divider flag though.
Otherwise, this is a collection of clk driver updates. More than half
the diffstat is in the Qualcomm clk driver where we add a bunch of
data to describe clks on various SoCs and fix bugs. The other big new
thing in here is the Mediatek MT8192 clk driver. That's been under
review for a while and it's nice to see that it's finally upstream.
Beyond that it's the usual set of minor fixes and tweaks to clk
drivers. There are some non-clk driver bits in here which have all
been acked by the respective maintainers.
New Drivers:
- Support video, gpu, display clks on qcom sc7280 SoCs
- GCC clks on qcom MSM8953, SM4250/6115, and SM6350 SoCs
- Multimedia clks (MMCC) on qcom MSM8994/MSM8992
- RPMh clks on qcom SM6350 SoCs
- Support for Mediatek MT8192 SoCs
- Add display (DU and DSI) clocks on Renesas R-Car V3U
- Add I2C, DMAC, USB, sound (SSIF-2), GPIO, CANFD, and ADC clocks and
resets on Renesas RZ/G2L
Updates:
- Support the SD/OE pin on IDT VersaClock 5 and 6 clock generators
- Add power of two flag to fractional divider clk type
- Migrate some clk drivers to clk_divider_ops.determine_rate
- Migrate to clk_parent_data in gcc-sdm660
- Fix CLKOUT clocks on i.MX8MM and i.MX8MN by using imx_clk_hw_mux2
- Switch from .round_rate to .determine_rate in clk-divider-gate
- Fix clock tree update for TF-A controlled clocks for all i.MX8M
- Add missing M7 core clock for i.MX8MN
- YAML conversion of rk3399 clock controller binding
- Removal of GRF dependency for the rk3328/rk3036 pll types
- Drop CLK_IS_CRITICAL flag from Tegra fuse clk
- Make CLK_R9A06G032 Kconfig symbol invisible
- Convert various DT bindings to YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (128 commits)
dt-bindings: clock: samsung: fix header path in example
clk: tegra: fix old-style declaration
clk: qcom: Add SM6350 GCC driver
MAINTAINERS: clock: include S3C and S5P in Samsung SoC clock entry
dt-bindings: clock: samsung: convert S5Pv210 AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos AudSS to dtschema
dt-bindings: clock: samsung: convert Exynos4 to dtschema
dt-bindings: clock: samsung: convert Exynos3250 to dtschema
dt-bindings: clock: samsung: convert Exynos542x to dtschema
dt-bindings: clock: samsung: add bindings for Exynos external clock
dt-bindings: clock: samsung: convert Exynos5250 to dtschema
clk: vc5: Add properties for configuring SD/OE behavior
clk: vc5: Use dev_err_probe
dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin
dt-bindings: clock: brcm,iproc-clocks: fix armpll properties
clk: zynqmp: Fix kernel-doc format
clk: at91: clk-generated: Limit the requested rate to our range
clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates
clk: zynqmp: Fix a memory leak
clk: zynqmp: Check the return type
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- mtk:
- added support for mt8192 and mt8195
- minor fix regarding address shift
- qcom:
- added compatibles for MSM8953, SM6350 and SM6115
- enable loading IPCC as a module
- misc:
- change Altera maintainer
- fix sti kernel-doc warnings
* tag 'mailbox-v5.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: cmdq: add multi-gce clocks support for mt8195
mailbox: cmdq: add mediatek mailbox support for mt8195
dt-bindings: gce: add gce header file for mt8195
dt-bindings: mailbox: add definition for mt8195
mailbox: qcom-apcs-ipc: Add compatible for MSM8953 SoC
dt-bindings: mailbox: Add compatible for the MSM8953
dt-bindings: mailbox: qcom-ipcc: Add compatible for SM6350
mailbox: qcom: Add support for SM6115 APCS IPC
dt-bindings: mailbox: qcom: Add SM6115 APCS compatible
soc: mediatek: cmdq: add address shift in jump
mailbox: cmdq: add mt8192 support
dt-binding: gce: add gce header file for mt8192
MAINTAINERS: Replace Ley Foon Tan as Altera Mailbox maintainer
mailbox: qcom-ipcc: Enable loading QCOM_IPCC as a module
mailbox: sti: quieten kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Move all the Intel drivers into their own subdir(s) (mostly Kate's
work)
- New meraki-mx100 platform driver
- Asus WMI driver enhancements, including support for
/sys/firmware/acpi/platform_profile
- New BIOS SAR driver for Intel M.2 WWAM modems
- Alder Lake support for the Intel PMC driver
- A whole bunch of cleanups + fixes all over the place"
* tag 'platform-drivers-x86-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits)
platform/x86: dell-smbios-wmi: Add missing kfree in error-exit from run_smbios_call
platform/x86: dell-smbios-wmi: Avoid false-positive memcpy() warning
platform/x86: ISST: use semi-colons instead of commas
platform/x86: asus-wmi: Fix "unsigned 'retval' is never less than zero" smatch warning
platform/x86: asus-wmi: Delete impossible condition
platform/x86: hp_accel: Convert to be a platform driver
platform/x86: hp_accel: Remove _INI method call
platform/mellanox: mlxbf-pmc: fix kernel-doc notation
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH
platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core
platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver
platform/x86: intel-wmi-thunderbolt: Move to intel sub-directory
platform/x86: intel-wmi-sbl-fw-update: Move to intel sub-directory
platform/x86: intel-vbtn: Move to intel sub-directory
platform/x86: intel_oaktrail: Move to intel sub-directory
platform/x86: intel_int0002_vgpio: Move to intel sub-directory
platform/x86: intel-hid: Move to intel sub-directory
platform/x86: intel_atomisp2: Move to intel sub-directory
platform/x86: intel_speed_select_if: Move to intel sub-directory
...
|
|
Pull VFIO updates from Alex Williamson:
- Fix dma-valid return WAITED implementation (Anthony Yznaga)
- SPDX license cleanups (Cai Huoqing)
- Split vfio-pci-core from vfio-pci and enhance PCI driver matching to
support future vendor provided vfio-pci variants (Yishai Hadas, Max
Gurtovoy, Jason Gunthorpe)
- Replace duplicated reflck with core support for managing first open,
last close, and device sets (Jason Gunthorpe, Max Gurtovoy, Yishai
Hadas)
- Fix non-modular mdev support and don't nag about request callback
support (Christoph Hellwig)
- Add semaphore to protect instruction intercept handler and replace
open-coded locks in vfio-ap driver (Tony Krowiak)
- Convert vfio-ap to vfio_register_group_dev() API (Jason Gunthorpe)
* tag 'vfio-v5.15-rc1' of git://github.com/awilliam/linux-vfio: (37 commits)
vfio/pci: Introduce vfio_pci_core.ko
vfio: Use kconfig if XX/endif blocks instead of repeating 'depends on'
vfio: Use select for eventfd
PCI / VFIO: Add 'override_only' support for VFIO PCI sub system
PCI: Add 'override_only' field to struct pci_device_id
vfio/pci: Move module parameters to vfio_pci.c
vfio/pci: Move igd initialization to vfio_pci.c
vfio/pci: Split the pci_driver code out of vfio_pci_core.c
vfio/pci: Include vfio header in vfio_pci_core.h
vfio/pci: Rename ops functions to fit core namings
vfio/pci: Rename vfio_pci_device to vfio_pci_core_device
vfio/pci: Rename vfio_pci_private.h to vfio_pci_core.h
vfio/pci: Rename vfio_pci.c to vfio_pci_core.c
vfio/ap_ops: Convert to use vfio_register_group_dev()
s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification
s390/vfio-ap: r/w lock for PQAP interception handler function pointer
vfio/type1: Fix vfio_find_dma_valid return
vfio-pci/zdev: Remove repeated verbose license text
vfio: platform: reset: Convert to SPDX identifier
vfio: Remove struct vfio_device_ops open/release
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- some small cleanups
- a fix for a bug when running as Xen PV guest which could result in
not all memory being transferred in case of a migration of the guest
- a small series for getting rid of code for supporting very old Xen
hypervisor versions nobody should be using since many years now
- a series for hardening the Xen block frontend driver
- a fix for Xen PV boot code issuing warning messages due to a stray
preempt_disable() on the non-boot processors
* tag 'for-linus-5.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: remove stray preempt_disable() from PV AP startup code
xen/pcifront: Removed unnecessary __ref annotation
x86: xen: platform-pci-unplug: use pr_err() and pr_warn() instead of raw printk()
drivers/xen/xenbus/xenbus_client.c: fix bugon.cocci warnings
xen/blkfront: don't trust the backend response data blindly
xen/blkfront: don't take local copy of a request from the ring page
xen/blkfront: read response from backend only once
xen: assume XENFEAT_gnttab_map_avail_bits being set for pv guests
xen: assume XENFEAT_mmu_pt_update_preserve_ad being set for pv guests
xen: check required Xen features
xen: fix setting of max_pfn in shared_info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro
collisions, fix PMD_ORDER collision, replace spaces with tabs
* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Fix fall-through warnings
parisc: fix crash with signals and alloca
parisc: Fix compile failure when building 64-bit kernel natively
parisc: ccio-dma.c: Added tab instead of spaces
parisc/parport_gsc: switch from 'pci_' to 'dma_' API
parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
parisc: switch from 'pci_' to 'dma_' API
parisc: Make struct parisc_driver::remove() return void
parisc: remove unused arch/parisc/boot/install.sh and its phony target
parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
parisc: math-emu: Avoid "fmt" macro collision
parisc: Increase size of gcc stack frame check
parisc: Replace symbolic permissions with octal permissions
|
|
Pull Xtensa updates from Max Filippov:
- fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
- add fairness to handling IRQs of the same priority
- fix pointer usage before NULL check in ISS console driver
- build system cleanups
* tag 'xtensa-20210902' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: move core-y in arch/xtensa/Makefile to arch/xtensa/Kbuild
xtensa: build platform directories unconditionally
xtensa: do not build variants directory
xtensa: remove unneeded exports
xtensa: ISS: don't use string pointer before NULL check
xtensa: add fairness to IRQ handling
xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull memory model updates from Ingo Molnar:
"LKMM updates:
- Update documentation and code example
KCSAN updates:
- Introduce CONFIG_KCSAN_STRICT (which RCU uses)
- Optimize use of get_ctx() by kcsan_found_watchpoint()
- Rework atomic.h into permissive.h
- Add the ability to ignore writes that change only one bit of a
given data-racy variable.
- Improve comments"
* tag 'locking-debug-2021-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/memory-model: Document data_race(READ_ONCE())
tools/memory-model: Heuristics using data_race() must handle all values
tools/memory-model: Add example for heuristic lockless reads
tools/memory-model: Make read_foo_diagnostic() more clearly diagnostic
kcsan: Make strict mode imply interruptible watchers
kcsan: permissive: Ignore data-racy 1-bit value changes
kcsan: Print if strict or non-strict during init
kcsan: Rework atomic.h into permissive.h
kcsan: Reduce get_ctx() uses in kcsan_found_watchpoint()
kcsan: Introduce CONFIG_KCSAN_STRICT
kcsan: Remove CONFIG_KCSAN_DEBUG
kcsan: Improve some Kconfig comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- Limit the allowed hash algorithms when writing security.ima xattrs or
verifying them, based on the IMA policy and the configured hash
algorithms.
- Return the calculated "critical data" measurement hash and size to
avoid code duplication. (Preparatory change for a proposed LSM.)
- and a single patch to address a compiler warning.
* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: reject unknown hash algorithms in ima_get_hash_algo
IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
IMA: introduce a new policy option func=SETXATTR_CHECK
IMA: add a policy option to restrict xattr hash algorithms on appraisal
IMA: add support to restrict the hash algorithms used for file appraisal
IMA: block writes of the security.ima xattr with unsupported algorithms
IMA: remove the dependency on CRYPTO_MD5
ima: Add digest and digest_len params to the functions to measure a buffer
ima: Return int in the functions to measure a buffer
ima: Introduce ima_get_current_hash_algo()
IMA: remove -Wmissing-prototypes warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Expand lib/test_stackinit to include more initialization styles
- Improve Kconfig for CLang's auto-var-init feature
- Introduce support for GCC's zero-call-used-regs feature
* tag 'hardening-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/test_stackinit: Add assigned initializers
lib/test_stackinit: Allow building stand-alone
lib/test_stackinit: Fix static initializer test
hardening: Clarify Kconfig text for auto-var-init
hardening: Introduce CONFIG_ZERO_CALL_USED_REGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
"This KUnit update for Linux 5.15-rc1 adds new features and tests:
Tool:
- support for '--kernel_args' to allow setting module params
- support for '--raw_output' option to show just the kunit output
during make
Tests:
- new KUnit tests for checksums and timestamps
- Print test statistics on failure
- Integrates UBSAN into the KUnit testing framework. It fails KUnit
tests whenever it reports undefined behavior"
* tag 'linux-kselftest-kunit-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Print test statistics on failure
kunit: tool: make --raw_output support only showing kunit output
kunit: tool: add --kernel_args to allow setting module params
kunit: ubsan integration
fat: Add KUnit tests for checksums and timestamps
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
"Robustness and debug improvements:
- add check for memory add/cap ordering
- add missing debug code to memblock_add_node()"
* tag 'memblock-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Check memory add/cap ordering
memblock: Add missing debug code to memblock_add_node()
|
|
Pull dma-mapping updates from Christoph Hellwig:
- fix debugfs initialization order (Anthony Iliopoulos)
- use memory_intersects() directly (Kefeng Wang)
- allow to return specific errors from ->map_sg (Logan Gunthorpe,
Martin Oliveira)
- turn the dma_map_sg return value into an unsigned int (me)
- provide a common global coherent pool іmplementation (me)
* tag 'dma-mapping-5.15' of git://git.infradead.org/users/hch/dma-mapping: (31 commits)
hexagon: use the generic global coherent pool
dma-mapping: make the global coherent pool conditional
dma-mapping: add a dma_init_global_coherent helper
dma-mapping: simplify dma_init_coherent_memory
dma-mapping: allow using the global coherent pool for !ARM
ARM/nommu: use the generic dma-direct code for non-coherent devices
dma-direct: add support for dma_coherent_default_memory
dma-mapping: return an unsigned int from dma_map_sg{,_attrs}
dma-mapping: disallow .map_sg operations from returning zero on error
dma-mapping: return error code from dma_dummy_map_sg()
x86/amd_gart: don't set failed sg dma_address to DMA_MAPPING_ERROR
x86/amd_gart: return error code from gart_map_sg()
xen: swiotlb: return error code from xen_swiotlb_map_sg()
parisc: return error code from .map_sg() ops
sparc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
sparc/iommu: return error codes from .map_sg() ops
s390/pci: don't set failed sg dma_address to DMA_MAPPING_ERROR
s390/pci: return error code from s390_dma_map_sg()
powerpc/iommu: don't set failed sg dma_address to DMA_MAPPING_ERROR
powerpc/iommu: return error code from .map_sg() ops
...
|
|
Pull configfs updates from Christoph Hellwig:
- fix a race in configfs_lookup (Sishuai Gong)
- minor cleanups (me)
* tag 'configfs-5.15' of git://git.infradead.org/users/hch/configfs:
configfs: fix a race in configfs_lookup()
configfs: fold configfs_attach_attr into configfs_lookup
configfs: simplify the configfs_dirent_is_ready
configfs: return -ENAMETOOLONG earlier in configfs_lookup
|
