summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-22selftests: futex: Add futex compare requeue testAndré Almeida
Add testing for futex_cmp_requeue(). The first test just requeues from one waiter to another one, and wakes it. The second performs both wake and requeue, and checks the return values to see if the operation woke/requeued the expected number of waiters. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Davidlohr Bueso <dbueso@suse.de> Link: https://lore.kernel.org/r/20210531165036.41468-3-andrealmeid@collabora.com
2021-06-22selftests: futex: Add futex wait testAndré Almeida
There are three different strategies to uniquely identify a futex in the kernel: - Private futexes: uses the pointer to mm_struct and the page address - Shared futexes: checks if the page containing the address is a PageAnon: - If it is, uses the same data as a private futexes - If it isn't, uses an inode sequence number from struct inode and the page's index Create a selftest to check those three paths and basic wait/wake mechanism. Signed-off-by: André Almeida <andrealmeid@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Davidlohr Bueso <dbueso@suse.de> Link: https://lore.kernel.org/r/20210531165036.41468-2-andrealmeid@collabora.com
2021-06-22x86/fpu: Make init_fpstate correct with optimized XSAVEThomas Gleixner
The XSAVE init code initializes all enabled and supported components with XRSTOR(S) to init state. Then it XSAVEs the state of the components back into init_fpstate which is used in several places to fill in the init state of components. This works correctly with XSAVE, but not with XSAVEOPT and XSAVES because those use the init optimization and skip writing state of components which are in init state. So init_fpstate.xsave still contains all zeroes after this operation. There are two ways to solve that: 1) Use XSAVE unconditionally, but that requires to reshuffle the buffer when XSAVES is enabled because XSAVES uses compacted format. 2) Save the components which are known to have a non-zero init state by other means. Looking deeper, #2 is the right thing to do because all components the kernel supports have all-zeroes init state except the legacy features (FP, SSE). Those cannot be hard coded because the states are not identical on all CPUs, but they can be saved with FXSAVE which avoids all conditionals. Use FXSAVE to save the legacy FP/SSE components in init_fpstate along with a BUILD_BUG_ON() which reminds developers to validate that a newly added component has all zeroes init state. As a bonus remove the now unused copy_xregs_to_kernel_booting() crutch. The XSAVE and reshuffle method can still be implemented in the unlikely case that components are added which have a non-zero init state and no other means to save them. For now, FXSAVE is just simple and good enough. [ bp: Fix a typo or two in the text. ] Fixes: 6bad06b76892 ("x86, xsave: Use xsaveopt in context-switch path when supported") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210618143444.587311343@linutronix.de
2021-06-22x86/fpu: Preserve supervisor states in sanitize_restored_user_xstate()Thomas Gleixner
sanitize_restored_user_xstate() preserves the supervisor states only when the fx_only argument is zero, which allows unprivileged user space to put supervisor states back into init state. Preserve them unconditionally. [ bp: Fix a typo or two in the text. ] Fixes: 5d6b6a6f9b5c ("x86/fpu/xstate: Update sanitize_restored_xstate() for supervisor xstates") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210618143444.438635017@linutronix.de
2021-06-22Revert "drm: add a locked version of drm_is_current_master"Daniel Vetter
This reverts commit 1815d9c86e3090477fbde066ff314a7e9721ee0f. Unfortunately this inverts the locking hierarchy, so back to the drawing board. Full lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted ------------------------------------------------------ kms_frontbuffer/1087 is trying to acquire lock: ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40 but task is already holding lock: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->mode_config.mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_probe+0x22e/0xca0 __drm_fb_helper_initial_config_and_unlock+0x42/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #1 (&client->modeset_mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_commit_locked+0x1c/0x180 drm_client_modeset_commit+0x1c/0x40 __drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0 drm_fb_helper_set_par+0x34/0x40 intel_fbdev_set_par+0x11/0x40 [i915] fbcon_init+0x270/0x4f0 visual_init+0xc6/0x130 do_bind_con_driver+0x1e5/0x2d0 do_take_over_console+0x10e/0x180 do_fbcon_takeover+0x53/0xb0 register_framebuffer+0x22d/0x310 __drm_fb_helper_initial_config_and_unlock+0x36c/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #0 (&dev->master_mutex){+.+.}-{3:3}: __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->mode_config.mutex); lock(&client->modeset_mutex); lock(&dev->mode_config.mutex); lock(&dev->master_mutex); *** DEADLOCK *** 1 lock held by kms_frontbuffer/1087: #0: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 stack backtrace: CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1 Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019 Call Trace: dump_stack+0x7f/0xad check_noncircular+0x12e/0x150 __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Note that this broke the intel-gfx CI pretty much across the board because it has to reboot machines after it hits a lockdep splat. Testcase: igt/debugfs_test/read_all_entries Acked-by: Petri Latvala <petri.latvala@intel.com> Fixes: 1815d9c86e30 ("drm: add a locked version of drm_is_current_master") Cc: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210622075409.2673805-1-daniel.vetter@ffwll.ch
2021-06-22arm64: mte: Sync tags for pages where PTE is untaggedSteven Price
A KVM guest could store tags in a page even if the VMM hasn't mapped the page with PROT_MTE. So when restoring pages from swap we will need to check to see if there are any saved tags even if !pte_tagged(). However don't check pages for which pte_access_permitted() returns false as these will not have been swapped out. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210621111716.37157-2-steven.price@arm.com
2021-06-22printk: fix cpu lock orderingJohn Ogness
The cpu lock implementation uses a full memory barrier to take the lock, but no memory barriers when releasing the lock. This means that changes performed by a lock owner may not be seen by the next lock owner. This may have been "good enough" for use by dump_stack() as a serialization mechanism, but it is not enough to provide proper protection for a critical section. Correct this problem by using acquire/release memory barriers for lock/unlock, respectively. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210617095051.4808-3-john.ogness@linutronix.de
2021-06-22lib/dump_stack: move cpu lock to printk.cJohn Ogness
dump_stack() implements its own cpu-reentrant spinning lock to best-effort serialize stack traces in the printk log. However, there are other functions (such as show_regs()) that can also benefit from this serialization. Move the cpu-reentrant spinning lock (cpu lock) into new helper functions printk_cpu_lock_irqsave()/printk_cpu_unlock_irqrestore() so that it is available for others as well. For !CONFIG_SMP the cpu lock is a NOP. Note that having multiple cpu locks in the system can easily lead to deadlock. Code needing a cpu lock should use the printk cpu lock, since the printk cpu lock could be acquired from any code and any context. Also note that it is not necessary for a cpu lock to disable interrupts. However, in upcoming work this cpu lock will be used for emergency tasks (for example, atomic consoles during kernel crashes) and any interruptions while holding the cpu lock should be avoided if possible. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> [pmladek@suse.com: Backported on top of 5.13-rc1.] Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210617095051.4808-2-john.ogness@linutronix.de
2021-06-22gpiolib: cdev: zero padding during conversion to gpioline_info_changedGabriel Knezek
When userspace requests a GPIO v1 line info changed event, lineinfo_watch_read() populates and returns the gpioline_info_changed structure. It contains 5 words of padding at the end which are not initialized before being returned to userspace. Zero the structure in gpio_v2_line_info_change_to_v1() before populating its contents. Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL") Signed-off-by: Gabriel Knezek <gabeknez@linux.microsoft.com> Reviewed-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-06-22Merge branch kvm-arm64/selftest/sysreg-list-fix into kvmarm-master/nextMarc Zyngier
Selftest updates from Andrew Jones, fixing the sysgreg list expectations by dealing with multiple configurations, such as with or without a PMU. * kvm-arm64/selftest/sysreg-list-fix: KVM: arm64: Update MAINTAINERS to include selftests KVM: arm64: selftests: get-reg-list: Split base and pmu registers KVM: arm64: selftests: get-reg-list: Remove get-reg-list-sve KVM: arm64: selftests: get-reg-list: Provide config selection option KVM: arm64: selftests: get-reg-list: Prepare to run multiple configs at once KVM: arm64: selftests: get-reg-list: Introduce vcpu configs
2021-06-22KVM: arm64: Update MAINTAINERS to include selftestsMarc Zyngier
As the KVM/arm64 selftests are routed via the kvmarm tree, add the relevant references to the MAINTAINERS file. Suggested-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210622070732.zod7gaqhqo344vg6@gator
2021-06-22KVM: arm64: selftests: get-reg-list: Split base and pmu registersAndrew Jones
Since KVM commit 11663111cd49 ("KVM: arm64: Hide PMU registers from userspace when not available") the get-reg-list* tests have been failing with ... ... There are 74 missing registers. The following lines are missing registers: ... where the 74 missing registers are all PMU registers. This isn't a bug in KVM that the selftest found, even though it's true that a KVM userspace that wasn't setting the KVM_ARM_VCPU_PMU_V3 VCPU flag, but still expecting the PMU registers to be in the reg-list, would suddenly no longer have their expectations met. In that case, the expectations were wrong, though, so that KVM userspace needs to be fixed, and so does this selftest. The fix for this selftest is to pull the PMU registers out of the base register sublist into their own sublist and then create new, pmu-enabled vcpu configs which can be tested. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210531103344.29325-6-drjones@redhat.com
2021-06-22KVM: arm64: selftests: get-reg-list: Remove get-reg-list-sveAndrew Jones
Now that we can easily run the test for multiple vcpu configs, let's merge get-reg-list and get-reg-list-sve into just get-reg-list. We also add a final change to make it more possible to run multiple tests, which is to fork the test, rather than directly run it. That allows a test to fail, but subsequent tests can still run. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210531103344.29325-5-drjones@redhat.com
2021-06-22KVM: arm64: selftests: get-reg-list: Provide config selection optionAndrew Jones
Add a new command line option that allows the user to select a specific configuration, e.g. --config=sve will give the sve config. Also provide help text and the --help/-h options. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210531103344.29325-4-drjones@redhat.com
2021-06-22KVM: arm64: selftests: get-reg-list: Prepare to run multiple configs at onceAndrew Jones
We don't want to have to create a new binary for each vcpu config, so prepare to run the test for multiple vcpu configs in a single binary. We do this by factoring out the test from main() and then looping over configs. When given '--list' we still never print more than a single reg-list for a single vcpu config though, because it would be confusing otherwise. No functional change intended. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210531103344.29325-3-drjones@redhat.com
2021-06-22KVM: arm64: selftests: get-reg-list: Introduce vcpu configsAndrew Jones
We already break register lists into sublists that get selected based on vcpu config. However, since we only had two configs (vregs and sve), we didn't structure the code very well to manage them. Restructure it now to more cleanly handle register sublists that are dependent on the vcpu config. This patch has no intended functional change (except for the vcpu config name now being prepended to all output). Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Ricardo Koller <ricarkol@google.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210531103344.29325-2-drjones@redhat.com
2021-06-21Revert "drm/amdgpu/gfx9: fix the doorbell missing when in CGPG issue."Yifan Zhang
This reverts commit 4cbbe34807938e6e494e535a68d5ff64edac3f20. Reason for revert: side effect of enlarging CP_MEC_DOORBELL_RANGE may cause some APUs fail to enter gfxoff in certain user cases. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-06-21Revert "drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full ↵Yifan Zhang
doorbell." This reverts commit 1c0b0efd148d5b24c4932ddb3fa03c8edd6097b3. Reason for revert: Side effect of enlarging CP_MEC_DOORBELL_RANGE may cause some APUs fail to enter gfxoff in certain user cases. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-06-21drm/amdgpu: Call drm_framebuffer_init last for framebuffer initMichel Dänzer
Once drm_framebuffer_init has returned 0, the framebuffer is hooked up to the reference counting machinery and can no longer be destroyed with a simple kfree. Therefore, it must be called last. If drm_framebuffer_init returns 0 but its caller then returns non-0, there will likely be memory corruption fireworks down the road. The following lead me to this fix: [ 12.891228] kernel BUG at lib/list_debug.c:25! [...] [ 12.891263] RIP: 0010:__list_add_valid+0x4b/0x70 [...] [ 12.891324] Call Trace: [ 12.891330] drm_framebuffer_init+0xb5/0x100 [drm] [ 12.891378] amdgpu_display_gem_fb_verify_and_init+0x47/0x120 [amdgpu] [ 12.891592] ? amdgpu_display_user_framebuffer_create+0x10d/0x1f0 [amdgpu] [ 12.891794] amdgpu_display_user_framebuffer_create+0x126/0x1f0 [amdgpu] [ 12.891995] drm_internal_framebuffer_create+0x378/0x3f0 [drm] [ 12.892036] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm] [ 12.892075] drm_mode_addfb2+0x34/0xd0 [drm] [ 12.892115] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm] [ 12.892153] drm_ioctl_kernel+0xe2/0x150 [drm] [ 12.892193] drm_ioctl+0x3da/0x460 [drm] [ 12.892232] ? drm_internal_framebuffer_create+0x3f0/0x3f0 [drm] [ 12.892274] amdgpu_drm_ioctl+0x43/0x80 [amdgpu] [ 12.892475] __se_sys_ioctl+0x72/0xc0 [ 12.892483] do_syscall_64+0x33/0x40 [ 12.892491] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: f258907fdd835e "drm/amdgpu: Verify bo size can fit framebuffer size on init." Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-21netfs: fix test for whether we can skip read when writing beyond EOFJeff Layton
It's not sufficient to skip reading when the pos is beyond the EOF. There may be data at the head of the page that we need to fill in before the write. Add a new helper function that corrects and clarifies the logic of when we can skip reads, and have it only zero out the part of the page that won't have data copied in for the write. Finally, don't set the page Uptodate after zeroing. It's not up to date since the write data won't have been copied in yet. [DH made the following changes: - Prefixed the new function with "netfs_". - Don't call zero_user_segments() for a full-page write. - Altered the beyond-last-page check to avoid a DIV instruction and got rid of then-redundant zero-length file check. ] Fixes: e1b1240c1ff5f ("netfs: Add write_begin helper") Reported-by: Andrew W Elble <aweits@rit.edu> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> cc: ceph-devel@vger.kernel.org Link: https://lore.kernel.org/r/20210613233345.113565-1-jlayton@kernel.org/ Link: https://lore.kernel.org/r/162367683365.460125.4467036947364047314.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162391826758.1173366.11794946719301590013.stgit@warthog.procyon.org.uk/ # v2
2021-06-21afs: Fix afs_write_end() to handle short writesDavid Howells
Fix afs_write_end() to correctly handle a short copy into the intended write region of the page. Two things are necessary: (1) If the page is not up to date, then we should just return 0 (ie. indicating a zero-length copy). The loop in generic_perform_write() will go around again, possibly breaking up the iterator into discrete chunks[1]. This is analogous to commit b9de313cf05fe08fa59efaf19756ec5283af672a for ceph. (2) The page should not have been set uptodate if it wasn't completely set up by netfs_write_begin() (this will be fixed in the next patch), so we need to set uptodate here in such a case. Also remove the assertion that was checking that the page was set uptodate since it's now set uptodate if it wasn't already a few lines above. The assertion was from when uptodate was set elsewhere. Changes: v3: Remove the handling of len exceeding the end of the page. Fixes: 3003bbd0697b ("afs: Use the netfs_write_begin() helper") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Al Viro <viro@zeniv.linux.org.uk> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/YMwVp268KTzTf8cN@zeniv-ca.linux.org.uk/ [1] Link: https://lore.kernel.org/r/162367682522.460125.5652091227576721609.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/162391825688.1173366.3437507255136307904.stgit@warthog.procyon.org.uk/ # v2
2021-06-21gpio: mxc: Fix disabled interrupt wake-up supportLoic Poulain
A disabled/masked interrupt marked as wakeup source must be re-enable and unmasked in order to be able to wake-up the host. That can be done by flaging the irqchip with IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND. Note: It 'sometimes' works without that change, but only thanks to the lazy generic interrupt disabling (keeping interrupt unmasked). Reported-by: Michal Koziel <michal.koziel@emlogic.no> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-06-21Merge series "regulator: qcom,rpmh-regulator: Add support for pmic available ↵Mark Brown
on SA8155p-adp board" from Bhupesh Sharma <bhupesh.sharma@linaro.org>: Changes since v2: ----------------- - v2 series can be found here: https://lore.kernel.org/linux-arm-msm/20210615074543.26700-1-bhupesh.sharma@linaro.org/T/#m8303d27d561b30133992da88198abb78ea833e21 - Addressed review comments from Bjorn and Mark. - As per suggestion from Bjorn, seperated the patches in different patchsets (specific to each subsystem) to ease review and patch application. Changes since v1: ----------------- - v1 series can be found here: https://lore.kernel.org/linux-arm-msm/20210607113840.15435-1-bhupesh.sharma@linaro.org/T/#mc524fe82798d4c4fb75dd0333318955e0406ad18 - Addressed review comments from Bjorn and Vinod received on the v1 series. This series adds the regulator support code for SA8155p-adp board which is based on Qualcomm snapdragon sa8155p SoC which in turn is simiar to the sm8150 SoC. This board supports a new PMIC PMM8155AU. While at it, also make some cosmetic changes to the regulator driver and dt-bindings to make sure the compatibles are alphabetical and also fix issues with extra comma(s) at the end of terminator line(s). Cc: Mark Brown <broonie@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Bhupesh Sharma (5): dt-bindings: regulator: qcom,rpmh-regulator: Arrange compatibles alphabetically dt-bindings: regulator: qcom,rpmh-regulator: Add compatible for SA8155p-adp board pmic regulator: qcom-rpmh: Cleanup terminator line commas regulator: qcom-rpmh: Add terminator at the end of pm7325x_vreg_data[] array regulator: qcom-rpmh: Add new regulator found on SA8155p adp board .../regulator/qcom,rpmh-regulator.yaml | 17 ++--- drivers/regulator/qcom-rpmh-regulator.c | 62 +++++++++++++++---- 2 files changed, 59 insertions(+), 20 deletions(-) -- 2.31.1
2021-06-21Merge series "Extend regulator notification support" from Matti Vaittinen ↵Mark Brown
<matti.vaittinen@fi.rohmeurope.com>: Extend regulator notification support This series extends the regulator notification and error flag support. Initial discussion on the topic can be found here: https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/ In a nutshell - the series adds: 1. WARNING level events/error flags. (Patch 3) Current regulator 'ERROR' event notifications for over/under voltage, over current and over temperature are used to indicate condition where monitored entity is so badly "off" that it actually indicates a hardware error which can not be recovered. The most typical hanling for that is believed to be a (graceful) system-shutdown. Here we add set of 'WARNING' level flags to allow sending notifications to consumers before things are 'that badly off' so that consumer drivers can implement recovery-actions. 2. Device-tree properties for specifying limit values. (Patches 1, 5) Add limits for above mentioned 'ERROR' and 'WARNING' levels (which send notifications to consumers) and also for a 'PROTECTION' level (which will be used to immediately shut-down the regulator(s) W/O informing consumer drivers. Typically implemented by hardware). Property parsing is implemented in regulator core which then calls callback operations for limit setting from the IC drivers. A warning is emitted if protection is requested by device tree but the underlying IC does not support configuring requested protection. 3. Helpers which can be registered by IC. (Patch 4) Target is to avoid implementing IRQ handling and IRQ storm protection in each IC driver. (Many of the ICs implementin these IRQs do not allow masking or acking the IRQ but keep the IRQ asserted for the whole duration of problem keeping the processor in IRQ handling loop). 4. Emergency poweroff function (refactored out of the thermal_core to kernel/reboot.c) which is called if IC fires error IRQs but IC reading fails and given retry-count is exceeded. (Patches 2, 4) Please note that the mutex in the emergency shutdown was replaced by a simple atomic in order to allow call from any context. The helper was attempted to be done so it could be used to implement roughly same logic as is used in qcom-labibb regulator. This means amongst other things a safety shut-down if IC registers are not readable. Using these shut-down retry counters are optional. The idea is that the helper could be also used by simpler ICs which do not provide status register(s) which can be used to check if error is still active. ICs which do not have such status register can simply omit the 'renable' callback (and retry-counts etc) - and helper assumes the situation is Ok and re-enables IRQ after given time period. If problem persists the handler is ran again and another notification is sent - but at least the delay allows processor to avoid IRQ loop. Patch 7 takes this notification support in use at BD9576MUF. Patch 8 is related to MFD change which is not really related to the RFC here. It was added to this series in order to avoid potential conflicts. Patch 9 adds a maintainers entry. Changelog v10-RESEND: - rebased on v5.13-rc4 Changelog v10: - rebased on v5.13-rc2 - Move rdev_*() print macros to the internal.h and use rdev_dbg() from irq_helpers.c - Export rdev_get_name() and move it from coupler.h to driver.h for others to use. (It was already in coupler.h but not exported - usage was limited and coupler.h does not sound like optimal place as rdev_name is not only used by coupled regulators) - Send all regulator notifications from irq_helpers.c at one OR'd event for the sake of simplicity. For BD9576 this does not matter as it has own IRQ for each event case. Header defining events says they may be OR'd. - Change WARN() at protection shutdown to pr_emerg as suggested by Petr. Changelog v9: - rebases on v5.13-rc1 - Update thermal documentation - Fix regulator notification event number Changelog v8: - split shutdown API adding and thermal core taking it in use to own patches. - replace the spinlock with atomic when ensuring the emergency shutdown is only called once. Changelog v7: general: - rebased on v5.12-rc7 - new patch for refactoring the hw-failure reboot logic out of thermal_core.c for others to use. notification helpers: - fix regulator error_flags query - grammar/typos - do not BUG() but attempt to shut-down the system - use BITS_PER_TYPE() Changelog v6: Add MAINTAINERS entry Changes to IRQ notifiers - move devm functions to drivers/regulator/devres.c - drop irq validity check - use devm_add_action_or_reset() - fix styling issues - fix kerneldocs Changelog v5: - Fix the badly formatted pr_emerg() call. Changelog v4: - rebased on v5.12-rc6 - dropped RFC - fix external FET DT-binding. - improve prints for cases when expecting HW failure. - styling and typos Changelog v3: Regulator core: - Fix dangling pointer access at regulator_irq_helper() stpmic1_regulator: - fix function prototype (compile error) bd9576-regulator: - Update over current limits to what was given in new data-sheet (REV00K) - Allow over-current monitoring without external FET. Set limits to values given in data-sheet (REV00K). Changelog v2: Generic: - rebase on v5.12-rc2 + BD9576 series - Split devm variant of delayed wq to own series Regulator framework: - Provide non devm variant of IRQ notification helpers - shorten dt-property names as suggested by Rob - unconditionally call map_event in IRQ handling and require it to be populated BD9576 regulators: - change the FET resistance property to micro-ohms - fix voltage computation in OC limit setting
2021-06-21arm64/mm: Rename ARM64_SWAPPER_USES_SECTION_MAPSAnshuman Khandual
ARM64_SWAPPER_USES_SECTION_MAPS implies that a PMD level huge page mappings are used for swapper, idmap and vmemmap. Lets make it PMD explicit removing any possible confusion with generic memory sections and also bit generic as it's applicable for idmap and vmemmap mappings as well. Hence rename it as ARM64_KERNEL_USES_PMD_MAPS instead. Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/1623991622-24294-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-06-21KVM: nVMX: Dynamically compute max VMCS index for vmcs12Sean Christopherson
Calculate the max VMCS index for vmcs12 by walking the array to find the actual max index. Hardcoding the index is prone to bitrot, and the calculation is only done on KVM bringup (albeit on every CPU, but there aren't _that_ many null entries in the array). Fixes: 3c0f99366e34 ("KVM: nVMX: Add a TSC multiplier field in VMCS12") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210618214658.2700765-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-21KVM: VMX: Skip #PF(RSVD) intercepts when emulating smaller maxphyaddrJim Mattson
As part of smaller maxphyaddr emulation, kvm needs to intercept present page faults to see if it needs to add the RSVD flag (bit 3) to the error code. However, there is no need to intercept page faults that already have the RSVD flag set. When setting up the page fault intercept, add the RSVD flag into the #PF error code mask field (but not the #PF error code match field) to skip the intercept when the RSVD flag is already set. Signed-off-by: Jim Mattson <jmattson@google.com> Message-Id: <20210618235941.1041604-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-21Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fix from Russell King: - fix gcc 10 compiler regression with cpu_init() * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9081/1: fix gcc-10 thumb2-kernel regression
2021-06-21drm: add a locked version of drm_is_current_masterDesmond Cheong Zhi Xi
While checking the master status of the DRM file in drm_is_current_master(), the device's master mutex should be held. Without the mutex, the pointer fpriv->master may be freed concurrently by another process calling drm_setmaster_ioctl(). This could lead to use-after-free errors when the pointer is subsequently dereferenced in drm_lease_owner(). The callers of drm_is_current_master() from drm_auth.c hold the device's master mutex, but external callers do not. Hence, we implement drm_is_current_master_locked() to be used within drm_auth.c, and modify drm_is_current_master() to grab the device's master mutex before checking the master status. Reported-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210620110327.4964-2-desmondcheongzx@gmail.com
2021-06-21objtool/x86: Ignore __x86_indirect_alt_* symbolsPeter Zijlstra
Because the __x86_indirect_alt* symbols are just that, objtool will try and validate them as regular symbols, instead of the alternative replacements that they are. This goes sideways for FRAME_POINTER=y builds; which generate a fair amount of warnings. Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/YNCgxwLBiK9wclYJ@hirez.programming.kicks-ass.net
2021-06-21x86/sev: Split up runtime #VC handler for correct state trackingJoerg Roedel
Split up the #VC handler code into a from-user and a from-kernel part. This allows clean and correct state tracking, as the #VC handler needs to enter NMI-state when raised from kernel mode and plain IRQ state when raised from user-mode. Fixes: 62441a1fb532 ("x86/sev-es: Correctly track IRQ states in runtime #VC handler") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210618115409.22735-3-joro@8bytes.org
2021-06-21x86/sev: Make sure IRQs are disabled while GHCB is activeJoerg Roedel
The #VC handler only cares about IRQs being disabled while the GHCB is active, as it must not be interrupted by something which could cause another #VC while it holds the GHCB (NMI is the exception for which the backup GHCB exits). Make sure nothing interrupts the code path while the GHCB is active by making sure that callers of __sev_{get,put}_ghcb() have disabled interrupts upfront. [ bp: Massage commit message. ] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210618115409.22735-2-joro@8bytes.org
2021-06-21btrfs: inline wait_current_trans_commit_start in its callerDavid Sterba
Function wait_current_trans_commit_start is now fairly trivial so it can be inlined in its only caller. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: sink wait_for_unblock parameter to async commitDavid Sterba
There's only one caller left btrfs_ioctl_start_sync that passes 0, so we can remove the switch in btrfs_commit_transaction_async. A cleanup 9babda9f33fd ("btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot") removed calls that passed 1, so this is a followup. As this removes last call of wait_current_trans_commit_start_and_unblock, remove the function as well. Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: remove total_data_size variable in btrfs_batch_insert_items()Nathan Chancellor
clang warns: fs/btrfs/delayed-inode.c:684:6: warning: variable 'total_data_size' set but not used [-Wunused-but-set-variable] int total_data_size = 0, total_size = 0; ^ 1 warning generated. This variable's value has been unused since commit fc0d82e103c7 ("btrfs: sink total_data parameter in setup_items_for_insert"). Eliminate it. Link: https://github.com/ClangBuiltLinux/linux/issues/1391 Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: eliminate insert label in add_falloc_rangeNikolay Borisov
By way of inverting the list_empty conditional the insert label can be eliminated, making the function's flow entirely linear. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: subpage: fix a rare race between metadata endio and eb freeingQu Wenruo
[BUG] There is a very rare ASSERT() triggering during full fstests run for subpage rw support. No other reproducer so far. The ASSERT() gets triggered for metadata read in btrfs_page_set_uptodate() inside end_page_read(). [CAUSE] There is still a small race window for metadata only, the race could happen like this: T1 | T2 ------------------------------------+----------------------------- end_bio_extent_readpage() | |- btrfs_validate_metadata_buffer() | | |- free_extent_buffer() | | Still have 2 refs | |- end_page_read() | |- if (unlikely(PagePrivate()) | | The page still has Private | | | free_extent_buffer() | | | Only one ref 1, will be | | | released | | |- detach_extent_buffer_page() | | |- btrfs_detach_subpage() |- btrfs_set_page_uptodate() | The page no longer has Private| >>> ASSERT() triggered <<< | This race window is super small, thus pretty hard to hit, even with so many runs of fstests. But the race window is still there, we have to go another way to solve it other than relying on random PagePrivate() check. Data path is not affected, as it will lock the page before reading, while unlocking the page after the last read has finished, thus no race window. [FIX] This patch will fix the bug by repurposing btrfs_subpage::readers. Now btrfs_subpage::readers will be a member shared by both metadata and data. For metadata path, we don't do the page unlock as metadata only relies on extent locking. At the same time, teach page_range_has_eb() to take btrfs_subpage::readers into consideration. So that even if the last eb of a page gets freed, page::private won't be detached as long as there still are pending end_page_read() calls. By this we eliminate the race window, this will slight increase the metadata memory usage, as the page may not be released as frequently as usual. But it should not be a big deal. The code got introduced in ("btrfs: submit read time repair only for each corrupted sector"), but the fix is in a separate patch to keep the problem description and the crash is rare so it should not hurt bisectability. Signed-off-by: Qu Wegruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: don't clear page extent mapped if we're not invalidating the full pageQu Wenruo
[BUG] With current btrfs subpage rw support, the following script can lead to fs hang: $ mkfs.btrfs -f -s 4k $dev $ mount $dev -o nospace_cache $mnt $ fsstress -w -n 100 -p 1 -s 1608140256 -v -d $mnt The fs will hang at btrfs_start_ordered_extent(). [CAUSE] In above test case, btrfs_invalidate() will be called with the following parameters: offset = 0 length = 53248 page dirty = 1 subpage dirty bitmap = 0x2000 Since @offset is 0, btrfs_invalidate() will try to invalidate the full page, and finally call clear_page_extent_mapped() which will detach subpage structure from the page. And since the page no longer has subpage structure, the subpage dirty bitmap will be cleared, preventing the dirty range from being written back, thus no way to wake up the ordered extent. [FIX] Just follow other filesystems, only to invalidate the page if the range covers the full page. There are cases like truncate_setsize() which can call btrfs_invalidatepage() with offset == 0 and length != 0 for the last page of an inode. Although the old code will still try to invalidate the full page, we are still safe to just wait for ordered extent to finish. So it shouldn't cause extra problems. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: fix the filemap_range_has_page() call in btrfs_punch_hole_lock_range()Qu Wenruo
[BUG] With current subpage RW support, the following script can hang the fs with 64K page size. # mkfs.btrfs -f -s 4k $dev # mount $dev -o nospace_cache $mnt # fsstress -w -n 50 -p 1 -s 1607749395 -d $mnt The kernel will do an infinite loop in btrfs_punch_hole_lock_range(). [CAUSE] In btrfs_punch_hole_lock_range() we: - Truncate page cache range - Lock extent io tree - Wait any ordered extents in the range. We exit the loop until we meet all the following conditions: - No ordered extent in the lock range - No page is in the lock range The latter condition has a pitfall, it only works for sector size == PAGE_SIZE case. While can't handle the following subpage case: 0 32K 64K 96K 128K | |///////||//////| || lockstart=32K lockend=96K - 1 In this case, although the range crosses 2 pages, truncate_pagecache_range() will invalidate no page at all, but only zero the [32K, 96K) range of the two pages. Thus filemap_range_has_page(32K, 96K-1) will always return true, thus we will never meet the loop exit condition. [FIX] Fix the problem by doing page alignment for the lock range. Function filemap_range_has_page() has already handled lend < lstart case, we only need to round up @lockstart, and round_down @lockend for truncate_pagecache_range(). This modification should not change any thing for sector size == PAGE_SIZE case, as in that case our range is already page aligned. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: reflink: make copy_inline_to_page() to be subpage compatibleQu Wenruo
The modifications are: - Page copy destination For subpage case, one page can contain multiple sectors, thus we can no longer expect the memcpy_to_page()/btrfs_decompress() to copy data into page offset 0. The correct offset is offset_in_page(file_offset) now, which should handle both regular sectorsize and subpage cases well. - Page status update Now we need to use subpage helper to handle the page status update. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make btrfs_page_mkwrite() to be subpage compatibleQu Wenruo
Only set_page_dirty() and SetPageUptodate() is not subpage compatible. Convert them to subpage helpers, so that __extent_writepage_io() can submit page content correctly. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make btrfs_truncate_block() to be subpage compatibleQu Wenruo
btrfs_truncate_block() itself is already mostly subpage compatible, the only missing part is the page dirtying code. Currently if we have a sector that needs to be truncated, we set the sector aligned range delalloc, then set the full page dirty. The problem is, current subpage code requires subpage dirty bit to be set, or __extent_writepage_io() won't submit bio, thus leads to ordered extent never to finish. So this patch will make btrfs_truncate_block() to call btrfs_page_set_dirty() helper to replace set_page_dirty() to fix the problem. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make __extent_writepage_io() only submit dirty range for subpageQu Wenruo
__extent_writepage_io() function originally just iterates through all the extent maps of a page, and submits any regular extents. This is fine for sectorsize == PAGE_SIZE case, as if a page is dirty, we need to submit the only sector contained in the page. But for subpage case, one dirty page can contain several clean sectors with at least one dirty sector. If __extent_writepage_io() still submit all regular extent maps, it can submit data which is already written to disk. And since such already written data won't have corresponding ordered extents, it will trigger a BUG_ON() in btrfs_csum_one_bio(). Change the behavior of __extent_writepage_io() by finding the first dirty byte in the page, and only submit the dirty range other than the full extent. Since we're also here, also modify the following calls to be subpage compatible: - SetPageError() - end_page_writeback() Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make btrfs_set_range_writeback() subpage compatibleQu Wenruo
Function btrfs_set_range_writeback() currently just sets the page writeback unconditionally. Change it to call the subpage helper so that we can handle both cases well. Since the subpage helpers needs btrfs_fs_info, also change the parameter to accept btrfs_inode. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: prevent extent_clear_unlock_delalloc() to unlock page not locked by ↵Qu Wenruo
__process_pages_contig() In cow_file_range(), after we have succeeded creating an inline extent, we unlock the page with extent_clear_unlock_delalloc() by passing locked_page == NULL. For sectorsize == PAGE_SIZE case, this is just making the page lock and unlock harder to grab. But for incoming subpage case, it can be a big problem. For incoming subpage case, page locking have two entry points: - __process_pages_contig() In that case, we know exactly the range we want to lock (which only requires sector alignment). To handle the subpage requirement, we introduce btrfs_subpage::writers to page::private, and will update it in __process_pages_contig(). - Other directly lock/unlock_page() call sites Those won't touch btrfs_subpage::writers at all. This means, page locked by __process_pages_contig() can only be unlocked by __process_pages_contig(). Thankfully we already have the existing infrastructure in the form of @locked_page in various call sites. Unfortunately, extent_clear_unlock_delalloc() in cow_file_range() after creating an inline extent is the exception. It intentionally call extent_clear_unlock_delalloc() with locked_page == NULL, to also unlock current page (and clear its dirty/writeback bits). To co-operate with incoming subpage modifications, and make the page lock/unlock pair easier to understand, this patch will still call extent_clear_unlock_delalloc() with locked_page, and only unlock the page in __extent_writepage(). Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: update locked page dirty/writeback/error bits in __process_pages_contigQu Wenruo
When __process_pages_contig() gets called for extent_clear_unlock_delalloc(), if we hit the locked page, only Private2 bit is updated, but dirty/writeback/error bits are all skipped. There are several call sites that call extent_clear_unlock_delalloc() with locked_page and PAGE_CLEAR_DIRTY/PAGE_SET_WRITEBACK/PAGE_END_WRITEBACK - cow_file_range() - run_delalloc_nocow() - cow_file_range_async() All for their error handling branches. For those call sites, since we skip the locked page for dirty/error/writeback bit update, the locked page will still have its subpage dirty bit remaining. Normally it's the call sites which locked the page to handle the locked page, but it won't hurt if we also do the update. Especially there are already other call sites doing the same thing by manually passing NULL as locked_page. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make page Ordered bit to be subpage compatibleQu Wenruo
This involves the following modification: - Ordered extent creation This is done in process_one_page(), now PAGE_SET_ORDERED will call subpage helper to do the work. - endio functions This is done in btrfs_mark_ordered_io_finished(). - btrfs_invalidatepage() - btrfs_cleanup_ordered_extents() Use the subpage page helper, and add an extra branch to exit if the locked page have covered the full range. Now the usage of page Ordered flag for ordered extent accounting is fully subpage compatible. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: introduce helpers for subpage ordered statusQu Wenruo
This patch introduces the following functions to handle btrfs subpage ordered (Private2) status: - btrfs_subpage_set_ordered() - btrfs_subpage_clear_ordered() - btrfs_subpage_test_ordered() These helpers can only be called when the range is ensured to be inside the page. - btrfs_page_set_ordered() - btrfs_page_clear_ordered() - btrfs_page_test_ordered() These helpers can handle both regular sector size and subpage without problem. These functions are here to coordinate btrfs_invalidatepage() with btrfs_writepage_endio_finish_ordered(), to make sure only one of those functions can finish the ordered extent. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make process_one_page() to handle subpage lockingQu Wenruo
Introduce a new data inodes specific subpage member, writers, to record how many sectors are under page lock for delalloc writing. This member acts pretty much the same as readers, except it's only for delalloc writes. This is important for delalloc code to trace which page can really be freed, as we have cases like run_delalloc_nocow() where we may exit processing nocow range inside a page, but need to exit to do cow half way. In that case, we need a way to determine if we can really unlock a full page. With the new btrfs_subpage::writers, there is a new requirement: - Page locked by process_one_page() must be unlocked by process_one_page() There are still tons of call sites manually lock and unlock a page, without updating btrfs_subpage::writers. So if we lock a page through process_one_page() then it must be unlocked by process_one_page() to keep btrfs_subpage::writers consistent. This will be handled in next patch. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21btrfs: make end_bio_extent_writepage() to be subpage compatibleQu Wenruo
Now in end_bio_extent_writepage(), the only subpage incompatible code is the end_page_writeback(). Just call the subpage helpers. Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64] Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64] Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
generated by cgit (git 2.34.1) at 2025-09-12 21:54:48 +0000