| Age | Commit message (Collapse) | Author |
|---|
|
ESI/MSI is a performance optimization feature that provides dedicated
interrupts per MCQ hardware queue. This is optional feature and UFS MCQ
should work with and without ESI feature.
Commit e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
brings a regression in ESI (Enhanced System Interrupt) configuration that
causes a null pointer dereference when Platform MSI allocation fails.
The issue occurs in when platform_device_msi_init_and_alloc_irqs() in
ufs_qcom_config_esi() fails (returns -EINVAL) but the current code uses
__free() macro for automatic cleanup free MSI resources that were never
successfully allocated.
Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000008
Call trace:
mutex_lock+0xc/0x54 (P)
platform_device_msi_free_irqs_all+0x1c/0x40
ufs_qcom_config_esi+0x1d0/0x220 [ufs_qcom]
ufshcd_config_mcq+0x28/0x104
ufshcd_init+0xa3c/0xf40
ufshcd_pltfrm_init+0x504/0x7d4
ufs_qcom_probe+0x20/0x58 [ufs_qcom]
Fix by restructuring the ESI configuration to try MSI allocation first,
before any other resource allocation and instead use explicit cleanup
instead of __free() macro to avoid cleanup of unallocated resources.
Tested on SM8750 platform with MCQ enabled, both with and without
Platform ESI support.
Fixes: e46a28cea29a ("scsi: ufs: qcom: Remove the MSI descriptor abuse")
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
Link: https://lore.kernel.org/r/20250811073330.20230-1-quic_nitirawa@quicinc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The name ufshcd_wait_for_doorbell_clr() refers to legacy mode. Commit
8d077ede48c1 ("scsi: ufs: Optimize the command queueing code") added
support for MCQ mode in this function. Since then the name of this
function is misleading. Hence change the name of this function into
something that is appropriate for both legacy and MCQ mode.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
ufshcd_wait_for_dev_cmd() and all its callers can return an OCS error.
OCS errors are represented by positive integers. Remove the WARN_ONCE()
statements that complain about positive error codes and update the
documentation.
Keep the behavior of ufshcd_wait_for_dev_cmd() because this return value
may end be passed as the second argument of bsg_job_done() and
bsg_job_done() handles positive and negative error codes differently.
Cc: Peter Wang <peter.wang@mediatek.com>
Fixes: cc59f3b68542 ("scsi: ufs: core: Improve return value documentation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-4-bvanassche@acm.org
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The UIC completion interrupt may be disabled while an UIC command is
being processed. When the UIC completion interrupt is reenabled, an UIC
interrupt is triggered and the WARN_ON_ONCE(!cmd) statement is hit.
Hence this patch that removes this kernel warning.
Fixes: fcd8b0450a9a ("scsi: ufs: core: Make ufshcd_uic_cmd_compl() easier to analyze")
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Commit 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced an IRQ lock inversion
issue. Fix this lock inversion by changing the spin_lock_irq() calls into
spin_lock_irqsave() calls in code that can be called either from
interrupt context or from thread context. This patch fixes the following
lockdep complaint:
WARNING: possible irq lock inversion dependency detected
6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G W OE
--------------------------------------------------------
kworker/u28:0/12 just changed the state of lock:
ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110
but this lock took another, HARDIRQ-unsafe lock in the past:
(shost->host_lock){+.+.}-{2:2}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(shost->host_lock);
local_irq_disable();
lock(&hba->clk_gating.lock);
lock(shost->host_lock);
<Interrupt>
lock(&hba->clk_gating.lock);
*** DEADLOCK ***
4 locks held by kworker/u28:0/12:
#0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
#1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
#2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120
#3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104
the shortest dependencies between 2nd lock and 1st lock:
-> (shost->host_lock){+.+.}-{2:2} {
HARDIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
SOFTIRQ-ON-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock+0x48/0x64
ufshcd_sl_intr+0x4c/0xa08
ufshcd_threaded_intr+0x70/0x12c
irq_thread_fn+0x48/0xa8
irq_thread+0x130/0x1ec
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10
... acquired at:
_raw_spin_lock_irqsave+0x5c/0x80
__ufshcd_release+0x78/0x118
ufshcd_send_uic_cmd+0xe4/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
-> (&hba->clk_gating.lock){-...}-{2:2} {
IN-HARDIRQ-W at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
INITIAL USE at:
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_hold+0x34/0x14c
ufshcd_send_uic_cmd+0x28/0x118
ufshcd_dme_set_attr+0x88/0x1c8
ufs_google_phy_initialization+0x68/0x418 [ufs]
ufs_google_link_startup_notify+0x78/0x27c [ufs]
ufshcd_link_startup+0x84/0x720
ufshcd_init+0xf3c/0x1330
ufshcd_pltfrm_init+0x728/0x7d8
ufs_google_probe+0x30/0x84 [ufs]
platform_probe+0xa0/0xe0
really_probe+0x114/0x454
__driver_probe_device+0xa4/0x160
driver_probe_device+0x44/0x23c
__driver_attach_async_helper+0x60/0xd4
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
}
... key at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10
... acquired at:
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
stack backtrace:
CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G W OE 6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: async async_run_entry_fn
Call trace:
dump_backtrace+0xfc/0x17c
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xa0
dump_stack+0x18/0x24
print_irq_inversion_bug+0x2fc/0x304
mark_lock_irq+0x388/0x4fc
mark_lock+0x1c4/0x224
__lock_acquire+0x438/0x2e1c
lock_acquire+0x134/0x2b4
_raw_spin_lock_irqsave+0x5c/0x80
ufshcd_release_scsi_cmd+0x60/0x110
ufshcd_compl_one_cqe+0x2c0/0x3f4
ufshcd_mcq_poll_cqe_lock+0xb0/0x104
ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a]
__handle_irq_event_percpu+0x104/0x32c
handle_irq_event+0x40/0x9c
handle_fasteoi_irq+0x170/0x2e8
generic_handle_domain_irq+0x58/0x80
gic_handle_irq+0x48/0x104
call_on_irq_stack+0x3c/0x50
do_interrupt_handler+0x7c/0xd8
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
_raw_spin_unlock_irqrestore+0x3c/0x6c
debug_object_assert_init+0x16c/0x21c
__mod_timer+0x4c/0x48c
schedule_timeout+0xd4/0x16c
io_schedule_timeout+0x48/0x70
do_wait_for_common+0x100/0x194
wait_for_completion_io_timeout+0x48/0x6c
blk_execute_rq+0x124/0x17c
scsi_execute_cmd+0x18c/0x3f8
scsi_probe_and_add_lun+0x204/0xd74
__scsi_add_device+0xbc/0x120
ufshcd_async_scan+0x80/0x3c0
async_run_entry_fn+0x4c/0x17c
process_one_work+0x26c/0x65c
worker_thread+0x33c/0x498
kthread+0x110/0x134
ret_from_fork+0x10/0x20
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Fixes: 3c7ac40d7322 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The commit under the Fixes tag added a netdev_assert_locked() in
bnxt_free_ntp_fltrs(). The lock should be held during normal run-time
but the assert will be triggered (see below) during bnxt_remove_one()
which should not need the lock. The netdev is already unregistered by
then. Fix it by calling netdev_assert_locked_or_invisible() which will
not assert if the netdev is unregistered.
WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re]
CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa92082387da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf
RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3
R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001
R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100
FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0
Call Trace:
<TASK>
bnxt_remove_one+0x57/0x180 [bnxt_en]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0xa5/0x130
driver_detach+0x42/0x90
bus_remove_driver+0x61/0xc0
pci_unregister_driver+0x38/0x90
bnxt_exit+0xc/0x7d0 [bnxt_en]
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When BCM5325 support was added in c45655386e53 ("net: dsa: b53: add
support for FDB operations on 5325/5365"), the register used for ARL access
was made conditional on the chip.
But in b53_fdb_dump(), instead of the register argument the page
argument was replaced, causing it to write to a reserved page 0x50 on
!BCM5325*. Writing to this page seems to completely lock the switch up:
[ 89.680000] b53-switch spi0.1 lan2: Link is Down
[ 89.680000] WARNING: CPU: 1 PID: 26 at drivers/net/phy/phy.c:1350 _phy_state_machine+0x1bc/0x454
[ 89.720000] phy_check_link_status+0x0/0x114: returned: -5
[ 89.730000] Modules linked in: nft_fib_inet nf_flow_table_inet nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 cls_flower sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32 cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred act_gact vrf md5 crc32c_cryptoapi
[ 89.780000] CPU: 1 UID: 0 PID: 26 Comm: kworker/u10:0 Tainted: G W 6.16.0-rc1+ #0 NONE
[ 89.780000] Tainted: [W]=WARN
[ 89.780000] Hardware name: Netgear DGND3700 v1
[ 89.780000] Workqueue: events_power_efficient phy_state_machine
[ 89.780000] Stack : 809c762c 8006b050 00000001 820a9ce3 0000114c 000affff 805d22d0 8200ba00
[ 89.780000] 82005000 6576656e 74735f70 6f776572 5f656666 10008b00 820a9cb8 82088700
[ 89.780000] 00000000 00000000 809c762c 820a9a98 00000000 00000000 ffffefff 80a7a76c
[ 89.780000] 80a70000 820a9af8 80a70000 80a70000 80a70000 00000000 809c762c 820a9dd4
[ 89.780000] 00000000 805d1494 80a029e4 80a70000 00000003 00000000 00000004 81a60004
[ 89.780000] ...
[ 89.780000] Call Trace:
[ 89.780000] [<800228b8>] show_stack+0x38/0x118
[ 89.780000] [<8001afc4>] dump_stack_lvl+0x6c/0xac
[ 89.780000] [<80046b90>] __warn+0x9c/0x114
[ 89.780000] [<80046da8>] warn_slowpath_fmt+0x1a0/0x1b0
[ 89.780000] [<805d1494>] _phy_state_machine+0x1bc/0x454
[ 89.780000] [<805d22fc>] phy_state_machine+0x2c/0x70
[ 89.780000] [<80066b08>] process_one_work+0x1e8/0x3e0
[ 89.780000] [<80067a1c>] worker_thread+0x354/0x4e4
[ 89.780000] [<800706cc>] kthread+0x130/0x274
[ 89.780000] [<8001d808>] ret_from_kernel_thread+0x14/0x1c
And any further accesses fail:
[ 120.790000] b53-switch spi0.1: timeout waiting for ARL to finish: 0x81
[ 120.800000] b53-switch spi0.1: port 2 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
[ 121.010000] b53-switch spi0.1: timeout waiting for ARL to finish: 0xbf
[ 121.020000] b53-switch spi0.1: port 3 failed to add 2c:b0:5d:27:9a:bd vid 3 to fdb: -145
Restore the correct page B53_ARLIO_PAGE again, and move the offset
argument to the correct place.
*On BCM5325, this became a write to the MIB page of Port 1. Still
a reserved offset, but likely less brokenness from that write.
Fixes: c45655386e53 ("net: dsa: b53: add support for FDB operations on 5325/5365")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250815201809.549195-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: misc fixes for v6.17-rc
Here are various fixes:
- Patch 1: Better handling SKB extension allocation failures.
A fix for v5.7.
- Patches 2, 3: Avoid resetting MPTCP limits when flushing MPTCP
endpoints. With a validation in the selftests. Fixes for v5.7.
- Patches 4, 5, 6: Disallow '0' as ADD_ADDR retransmission timeout.
With a preparation patch, and a validation in the selftests.
Fixes for v5.11.
- Patches 8, 9: Fix C23 extension warnings in the selftests,
spotted by GCC. Fixes for v6.16.
====================
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-0-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC was complaining about the new label:
mptcp_inq.c:79:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
79 | int err = getaddrinfo(node, service, hints, res);
| ^
mptcp_sockopt.c:166:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
166 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: dd367e81b79a ("selftests: mptcp: sockopt: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-8-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC was complaining about the new label:
mptcp_connect.c:187:2: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
187 | int err = getaddrinfo(node, service, hints, res);
| ^
Simply declare 'err' before the label to avoid this warning.
Fixes: a862771d1aa4 ("selftests: mptcp: use IPPROTO_MPTCP for getaddrinfo")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-7-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To prevent test instability in the "delete re-add signal" test caused by
ADD_ADDR retransmissions, disable retransmissions for this test by setting
net.mptcp.add_addr_timeout to 0.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-6-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When add_addr_timeout was set to 0, this caused the ADD_ADDR to be
retransmitted immediately, which looks like a buggy behaviour. Instead,
interpret 0 as "no retransmissions needed".
The documentation is updated to explicitly state that setting the timeout
to 0 disables retransmission.
Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-5-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sk_reset_timer() was called twice in mptcp_pm_alloc_anno_list.
Simplify the code by using a 'goto' statement to eliminate the
duplication.
Note that this is not a fix, but it will help backporting the following
patch. The same "Fixes" tag has been added for this reason.
Fixes: 93f323b9cccc ("mptcp: add a new sysctl add_addr_timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-4-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A flush of the MPTCP endpoints should not affect the MPTCP limits. In
other words, 'ip mptcp endpoint flush' should not change 'ip mptcp
limits'.
But it was the case: the MPTCP_PM_ATTR_RCV_ADD_ADDRS (add_addr_accepted)
limit was reset by accident. Removing the reset of this counter during a
flush fixes this issue.
Fixes: 01cacb00b35c ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reported-by: Thomas Dreibholz <dreibh@simula.no>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/579
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-2-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When skb_ext_add(skb, SKB_EXT_MPTCP) fails in mptcp_incoming_options(),
we used to return true, letting the segment proceed through the TCP
receive path without a DSS mapping. Such segments can leave inconsistent
mapping state and trigger a mid-stream fallback to TCP, which in testing
collapsed (by artificially forcing failures in skb_ext_add) throughput
to zero.
Return false instead so the TCP input path drops the skb (see
tcp_data_queue() and step-7 processing). This is the safer choice
under memory pressure: it preserves MPTCP correctness and provides
backpressure to the sender.
Control packets remain unaffected: ACK updates and DATA_FIN handling
happen before attempting the extension allocation, and tcp_reset()
continues to ignore the return value.
With this change, MPTCP continues to work at high throughput if we
artificially inject failures into skb_ext_add.
Fixes: 6787b7e350d3 ("mptcp: avoid processing packet if a subflow reset")
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Paasch <cpaasch@openai.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-1-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The seg6_genl_sethmac() directly uses the algorithm ID provided by the
userspace without verifying whether it is an HMAC algorithm supported
by the system.
If an unsupported HMAC algorithm ID is configured, packets using SRv6 HMAC
will be dropped during encapsulation or decapsulation.
Fixes: 4f4853dc1c9c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: Minhong He <heminhong@kylinos.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250815063845.85426-1-heminhong@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When performing Generic Segmentation Offload (GSO) on an IPv6 packet that
contains extension headers, the kernel incorrectly requests checksum offload
if the egress device only advertises NETIF_F_IPV6_CSUM feature, which has
a strict contract: it supports checksum offload only for plain TCP or UDP
over IPv6 and explicitly does not support packets with extension headers.
The current GSO logic violates this contract by failing to disable the feature
for packets with extension headers, such as those used in GREoIPv6 tunnels.
This violation results in the device being asked to perform an operation
it cannot support, leading to a `skb_warn_bad_offload` warning and a collapse
of network throughput. While device TSO/USO is correctly bypassed in favor
of software GSO for these packets, the GSO stack must be explicitly told not
to request checksum offload.
Mask NETIF_F_IPV6_CSUM, NETIF_F_TSO6 and NETIF_F_GSO_UDP_L4
in gso_features_check if the IPv6 header contains extension headers to compute
checksum in software.
The exception is a BIG TCP extension, which, as stated in commit
68e068cabd2c6c53 ("net: reenable NETIF_F_IPV6_CSUM offload for BIG TCP packets"):
"The feature is only enabled on devices that support BIG TCP TSO.
The header is only present for PF_PACKET taps like tcpdump,
and not transmitted by physical devices."
kernel log output (truncated):
WARNING: CPU: 1 PID: 5273 at net/core/dev.c:3535 skb_warn_bad_offload+0x81/0x140
...
Call Trace:
<TASK>
skb_checksum_help+0x12a/0x1f0
validate_xmit_skb+0x1a3/0x2d0
validate_xmit_skb_list+0x4f/0x80
sch_direct_xmit+0x1a2/0x380
__dev_xmit_skb+0x242/0x670
__dev_queue_xmit+0x3fc/0x7f0
ip6_finish_output2+0x25e/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_tnl_xmit+0x608/0xc00 [ip6_tunnel]
ip6gre_tunnel_xmit+0x1c0/0x390 [ip6_gre]
dev_hard_start_xmit+0x63/0x1c0
__dev_queue_xmit+0x6d0/0x7f0
ip6_finish_output2+0x214/0x5d0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
ip6_finish_output+0x1fc/0x3f0
ip6_xmit+0x2ca/0x6f0
inet6_csk_xmit+0xeb/0x150
__tcp_transmit_skb+0x555/0xa80
tcp_write_xmit+0x32a/0xe90
tcp_sendmsg_locked+0x437/0x1110
tcp_sendmsg+0x2f/0x50
...
skb linear: 00000000: e4 3d 1a 7d ec 30 e4 3d 1a 7e 5d 90 86 dd 60 0e
skb linear: 00000010: 00 0a 1b 34 3c 40 20 11 00 00 00 00 00 00 00 00
skb linear: 00000020: 00 00 00 00 00 12 20 11 00 00 00 00 00 00 00 00
skb linear: 00000030: 00 00 00 00 00 11 2f 00 04 01 04 01 01 00 00 00
skb linear: 00000040: 86 dd 60 0e 00 0a 1b 00 06 40 20 23 00 00 00 00
skb linear: 00000050: 00 00 00 00 00 00 00 00 00 12 20 23 00 00 00 00
skb linear: 00000060: 00 00 00 00 00 00 00 00 00 11 bf 96 14 51 13 f9
skb linear: 00000070: ae 27 a0 a8 2b e3 80 18 00 40 5b 6f 00 00 01 01
skb linear: 00000080: 08 0a 42 d4 50 d5 4b 70 f8 1a
Fixes: 04c20a9356f283da ("net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extension")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Suggested-by: Michal Schmidt <mschmidt@redhat.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Jakub Ramaseuski <jramaseu@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250814105119.1525687-1-jramaseu@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On DCE 6, DP audio was not working. However, it worked when an
HDMI monitor was also plugged in.
Looking at dce_aud_wall_dto_setup it seems that the main
difference is that we use DTO1 when only DP is plugged in.
When programming DTO1, it uses audio_dto_source_clock_in_khz
which is set from get_dp_ref_freq_khz
The dce60_get_dp_ref_freq_khz implementation looks incorrect,
because DENTIST_DISPCLK_CNTL seems to be always zero on DCE 6,
so it isn't usable.
I compared dce60_get_dp_ref_freq_khz to the legacy display code,
specifically dce_v6_0_audio_set_dto, and it turns out that in
case of DCE 6, it needs to use the display clock. With that,
DP audio started working on Pitcairn, Oland and Cape Verde.
However, it still didn't work on Tahiti. Despite having the
same DCE version, Tahiti seems to have a different audio device.
After some trial and error I realized that it works with the
default display clock as reported by the VBIOS, not the current
display clock.
The patch was tested on all four SI GPUs:
* Pitcairn (DCE 6.0)
* Oland (DCE 6.4)
* Cape Verde (DCE 6.0)
* Tahiti (DCE 6.0 but different)
The testing was done on Samsung Odyssey G7 LS28BG700EPXEN on
each of the above GPUs, at the following settings:
* 4K 60 Hz
* 1080p 60 Hz
* 1080p 144 Hz
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 645cc7863da5de700547d236697dffd6760cf051)
Cc: stable@vger.kernel.org
|
|
For later VBIOS versions, the fractional feedback divider is
calculated as the remainder of dividing the feedback divider by
a factor, which is set to 1000000. For reference, see:
- calculate_fb_and_fractional_fb_divider
- calc_pll_max_vco_construct
However, in case of old VBIOS versions that have
set_pixel_clock_v3, they only have 1 byte available for the
fractional feedback divider, and it's expected to be set to the
remainder from dividing the feedback divider by 10.
For reference see the legacy display code:
- amdgpu_pll_compute
- amdgpu_atombios_crtc_program_pll
This commit fixes set_pixel_clock_v3 by dividing the fractional
feedback divider passed to the function by 100000.
Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 027e7acc7e17802ebf28e1edb88a404836ad50d6)
Cc: stable@vger.kernel.org
|
|
When getting the number of connectors, the VBIOS reports
the number of valid indices, but it doesn't say which indices
are valid, and not every valid index has an actual connector.
If we don't find a connector on an index, that is not an error.
Considering these are not actual errors, don't litter the logs.
Fixes: 60df5628144b ("drm/amd/display: handle invalid connector indices")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 249d4bc5f1935f04bb45b3b63c0f8922565124f7)
|
|
On some GPUs the VBIOS just doesn't have encoder caps,
or maybe not for every encoder.
This isn't really a problem and it's handled well,
so let's not litter the logs with it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512)
|
|
dce110_fill_display_configs
Also needed by DCE 6.
This way the code that gathers this info can be shared between
different DCE versions and doesn't have to be repeated.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8107432dff37db26fcb641b6cebeae8981cd73a0)
Cc: stable@vger.kernel.org
|
|
dce110_fill_display_configs
dce110_fill_display_configs is shared between DCE 6-11, and
finding the first CRTC and its line time is relevant to DCE 6 too.
Move the code to find it from DCE 11 specific code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63)
Cc: stable@vger.kernel.org
|
|
Adjust the nominal (and performance) clocks for DCE 8-10,
and set them to 625 MHz, which is the value used by the legacy
display code in amdgpu_atombios_get_clock_info.
This was tested with Hawaii, Tonga and Fiji.
These GPUs can output 4K 60Hz (10-bit depth) at 625 MHz.
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 8-10 which
are already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 8-10 display clock.
Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris")
Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ae45b5d4f371af8ae51a3827d0ec9fe27eeb867)
|
|
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 6 which
is already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 6 display clock.
Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris")
Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific")
Fixes: 3ecb3b794e2c ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 427980c1cbd22bb256b9385f5ce73c0937562408)
Cc: stable@vger.kernel.org
|
|
The function mod_hdcp_hdcp1_create_session() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference.
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
This is similar to the commit c3e9826a2202
("drm/amd/display: Add null pointer check for get_first_active_display()").
Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)
|
|
[WHY & HOW]
IPS & self-fresh feature can cause vblank counter resets between
vblank disable and enable.
It may cause system stuck due to wait the vblank counter.
Call the drm_crtc_vblank_restore() during vblank enable to estimate
missed vblanks by using timestamps and update the vblank counter in
DRM.
It can make the vblank counter increase smoothly and resolve this issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 34d66bc7ff10e146a4cec76cf286979740a10954)
Cc: stable@vger.kernel.org
|
|
[WHY]
Although unlikely drm_atomic_get_new_connector_state() or
drm_atomic_get_old_connector_state() can return NULL.
[HOW]
Check returns before dereference.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)
Cc: stable@vger.kernel.org
|
|
Take into account the limits from the vbios. Ported
from the SMU13 code.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4352
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 203cc7f1dd86f2c8de5c3c6182f19adac7c9c206)
Cc: stable@vger.kernel.org
|
|
This reverts commits:
commit 1f26214d268b ("drm/amd/display: Add HPO encoder support to Replay")
commit 3bfce48b109f ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)")
due to visual confirm issue.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb)
|
|
Drop KVM's check on an empty cpumask when flushing caches when memory is
being reclaimed from an SEV VM, as smp_call_function_many_cond() naturally
(and correctly) handles an empty cpumask. This avoids an extra O(n)
lookup in the common case where at least one pCPU has enterred the guest,
which could be noticeable in some setups, e.g. if a small VM is pinned to
the last few pCPUs in the system.
Fixes: 6f38f8c57464 ("KVM: SVM: Flush cache only on CPUs running SEV guest")
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
[sean: rewrite changelog to capture performance angle]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
To pick up the changes in this cset:
7d9896e9f6d02d8a vhost: Reintroduce kthread API and add mode selection
333c515d189657c9 vhost-net: allow configuring extended features
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Please see tools/include/uapi/README for further details.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: kvm@vger.kernel.org
Cc: virtualization@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
b1fabef37bd504f3 prctl: Introduce PR_MTE_STORE_ONLY
a2fc422ed75748ee syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
76fdb7eb4e1c9108 uapi: export PROCFS_ROOT_INO
ca115d7e754691c0 tree-wide: s/struct fileattr/struct file_kattr/g
be7efb2d20d67f33 fs: introduce file_getattr and file_setattr syscalls
9eb22f7fedfc9eb1 fs: add ioctl to query metadata and protection info capabilities
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
3941e37f62fe2c3c uapi/fcntl: add FD_PIDFS_ROOT
cd5d2006327b6d84 uapi/fcntl: add FD_INVALID
67fcec2919e4ed31 fcntl/pidfd: redefine PIDFD_SELF_THREAD_GROUP
a4c746f06853f91d uapi/fcntl: mark range as reserved
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
be7efb2d20d67f33 fs: introduce file_getattr and file_setattr syscalls
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
Please see tools/include/uapi/README for further details.
Cc: Arnd Bergmann <arnd@arndb.de>
CC: linux-api@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
69bf2053608423cb powerpc: Drop GPL boilerplate text with obsolete FSF address
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
efe676a1a7554219 arm64: proton-pack: Add new CPUs 'k' values for branch mitigation
e18c09b204e81702 arm64: Add support for HIP09 Spectre-BHB mitigation
a9b5bd81b294d30a arm64: cputype: Add MIDR_CORTEX_A76AE
53a52a0ec7680287 arm64: cputype: Add comments about Qualcomm Kryo 5XX and 6XX cores
401c3333bb2396aa arm64: cputype: Add QCOM_CPU_PART_KRYO_3XX_GOLD
86edf6bdcf0571c0 smccc/kvm_guest: Enable errata based on implementation CPUs
0bc9a9e85fcf4ffb KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
But the following two changes cannot be applied since they introduced
new build errors in util/arm-spe.c. So it still has the warning after
this change.
c8c2647e69bedf80 arm64: Make _midr_in_range_list() an exported function
e3121298c7fcaf48 arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Please see tools/include/uapi/README for further details.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf build: [WIP] Fix arm-spe build errors
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
7b306dfa326f7011 x86/sev: Evict cache lines during SNP memory validation
65f55a30176662ee x86/CPU/AMD: Add CPUID faulting support
d8010d4ba43e9f79 x86/bugs: Add a Transient Scheduler Attacks mitigation
a3c4f3396b82849a x86/msr-index: Add AMD workload classification MSRs
17ec2f965344ee3f KVM: VMX: Allow guest to set DEBUGCTL.RTM_DEBUG if RTM is supported
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for further details.
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
5ccaeedb489b41ce cfi: add C CFI type macro
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/cfi_types.h include/linux/cfi_types.h
Please see tools/include/uapi/README for further details.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
104ea1c84b91c9f4 bits: unify the non-asm GENMASK*()
6d4471252ccc1722 bits: split the definition of the asm and non-asm GENMASK*()
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Please see tools/include/uapi/README for further details.
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
bdev_nr_sectors() == 0 is a pattern used for block devices that have
been hot removed, don't spam the log about them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250818101102.1604551-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use vfs_getattr_nosec() in lo_calculate_size() for getting the file
size, rather than just read the cached inode size via i_size_read().
This provides better results than cached inode data, particularly for
network filesystems where metadata may be stale.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-3-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Renamed get_size to lo_calculate_size and merged the logic from get_size
and get_loop_size into a single function. Update all callers to use
lo_calculate_size. This is done in preparation for improving the size
detection logic.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-2-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To pick up the changes in this cset:
f55ce5a6cd33211c KVM: arm64: Expose new KVM cap for cacheable PFNMAP
28224ef02b56fcee KVM: TDX: Report supported optional TDVMCALLs in TDX capabilities
4580dbef5ce0f95a KVM: TDX: Exit to userspace for SetupEventNotifyInterrupt
25e8b1dd4883e6c2 KVM: TDX: Exit to userspace for GetTdVmCallInfo
cf207eac06f661fb KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There's an environment that caused the following build error. Include
"debug.h" (under util directory) to fix it.
arch/x86/tests/topdown.c: In function 'event_cb':
arch/x86/tests/topdown.c:53:25: error: implicit declaration of function 'pr_debug'
[-Werror=implicit-function-declaration]
53 | pr_debug("Broken topdown information for '%s'\n", evsel__name(evsel));
| ^~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/20250815164122.289651-1-namhyung@kernel.org
Fixes: 5b546de9cc177936 ("perf topdown: Use attribute to see an event is a topdown metic or slots")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.
Fixes: df6e71256c84 ("iio: pressure: bmp280: Explicitly mark GPIO optional")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux into block-6.17
Pull MD fixes from Yu:
"- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode, the old
release with a new kernel now will have warning about deprecated
behavior, and we prepare to remove this legacy mode after about a
year later.
- The rename in kernel causing user tools build failure, revert the
rename in mdp_superblock_s.
- Fix a regression that interrupted resync can be shown as recover from
mdstat or sysfs."
* tag 'md-6.17-20250819' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux:
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
|
|
Modify the standby configuration
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250815024729.3051-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
