summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-25Blackfin: fix inverted anomaly 05000481 logicMike Frysinger
No one uses these MMRs so we didn't notice when the anomaly handling logic was inverted. Reported-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25Blackfin: drop unused irq_panic()/DEBUG_ICACHE_CHECKMike Frysinger
This code was useful during early port development when our icache code wasn't solid, but that ship has sailed long ago, and no code calls this function anymore (irq_panic). So punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-10-25ipv4: add __rcu annotations to ip_ra_chainEric Dumazet
Add __rcu annotations to : (struct ip_ra_chain)->next struct ip_ra_chain *ip_ra_chain; And use appropriate rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25net: add __rcu annotation to sk_filterEric Dumazet
Add __rcu annotation to : (struct sock)->sk_filter And use appropriate rcu primitives to reduce sparse warnings if CONFIG_SPARSE_RCU_POINTER=y Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25net_ns: add __rcu annotationsEric Dumazet
add __rcu annotation to (struct net)->gen, and use rcu_dereference_protected() in net_assign_generic() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25rps: add __rcu annotationsEric Dumazet
Add __rcu annotations to : (struct netdev_rx_queue)->rps_map (struct netdev_rx_queue)->rps_flow_table struct rps_sock_flow_table *rps_sock_flow_table; And use appropriate rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25hwmon: lis3: Short explanations of platform data fieldsSamu Onkalo
Short documentation at kernel doc format. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Enhance lis3 selftest with IRQ line testSamu Onkalo
Configure chip to data ready mode in selftest and count received interrupts to see that interrupt line(s) are working. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: use block read to access data registersSamu Onkalo
Add optional blockread function to interface driver. If available the chip driver uses it for data register access. For 12 bit device it reads 6 bytes to get 3*16bit data. For 8 bit device it reads out 5 bytes since every second byte is dummy. This optimizes bus usage and reduces number of operations and interrupts needed for one data update. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Adjust fuzziness for 8 bit deviceSamu Onkalo
Default fuziness is set smaller for 8 device. In 12 bit device LSB is quite close to 1 mg (mg = 1 / 1000 of earth gravity). In 8bit device LSB is about 18 mg. Set fuziness to 1 for 8 bit device. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: New parameters to platform dataSamu Onkalo
Added default output data rate setting to platform data. If default rate is 0, reset default value is used. Added control for duration via platform data. Added possibility to configure interrupts to trig on both rising and falling edge. The lis3 WU unit can be configured quite many ways and with some configurations it is quite handy to get coordinate refresh when some event trigs and when it reason goes away. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: restore axis enabled bitsSamu Onkalo
All axis enable bits are set to 0 at module remove. Restore reset default value at init. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Power on correctionsSamu Onkalo
Sometimes lis3 chip seems to fail to setup factory tuning at boot up. This probably happens if there is some odd power ramp down ramp up sequence for example in device restart. Set boot bit in control2 register to trig boot sequence manually and wait until it is finished. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Update coordinates at polled device openSamu Onkalo
Call input device poll function at device open to refresh coordinates immediately. This is needed for the case where poll interval is set to zero and coordinate updates happens purely under interrupt control. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: Cleanup interrupt handlingSamu Onkalo
Irqcfg moved to chip data instead of platform data. This simplifies access in interrupt handler little bit. Input device open and close functions set status for interrupt threaded handler once. Unnecessary check for interrupt source removed since it is enough that active interrupt line indicates that there was an interrupt. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: regulator controlSamu Onkalo
Based on pm_runtime control, turn lis3 regulators on and off. Perform context save and restore on transitions. Feature is optional and must be enabled in platform data. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: lis3: pm_runtime supportSamu Onkalo
Add pm_runtime support to lis3 core driver. Add pm_runtime support to lis3 i2c driver. spi and hp_accel drivers are not yet supported. Old always on functionality remains for those. For sysfs there is 5 second delay before turning off the chip to avoid long ramp up delay. Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25Kirkwood: add fan support for Network Space Max v2Simon Guinot
Signed-off-by: Simon Guinot <sguinot@lacie.com> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: add generic GPIO fan driverSimon Guinot
This patch adds hwmon support for fans connected to GPIO lines. Platform specific information such as GPIO pinout and speed conversion array (rpm from/to GPIO value) are passed to the driver via platform_data. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (coretemp) fix reading of microcode revision (v2)Jan Beulich
According to the documentation, simply reading the respective MSR isn't sufficient: It should be written with zeros, cpuid(1) be executed, and then read (see arch/x86/kernel/cpu/intel.c for an example). v2: Fail probe when microcode revision cannot be determined, but is needed to check for proper operation. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jean Delvare <khali@linux-fr.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: ({core, pkg, via-cpu}temp) remove unnecessary CONFIG_HOTPLUG_CPU ifdefsChen Gong
CONFIG_HOTPLUG_CPU is used too much in some drivers. This patch clean them up. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (pkgtemp) align driver initialization style with coretempChen Gong
pkgtemp is derived from coretemp, so some reasonable logics should be applied onto pkgtemp, too. Such as the init logic here. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: LTC4261 Hardware monitoring driverGuenter Roeck
This driver adds support for Linear Technology LTC4261 I2C Negative Voltage Hot Swap Controller. Reviewed-by: Ira W. Snyder <iws@ovro.caltech.edu> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (lis3) add axes module parameter for custom axis-mappingTakashi Iwai
The axis-mapping of lis3dev device on many (rather most) HP machines doesn't follow the standard. When each new model appears, users need to adjust again. Testing this requires the rebuild of kernel, thus it's not trivial for end-users. This patch adds a module parameter "axes" to allow a custom axis-mapping without patching and recompiling the kernel driver. User can pass the parameter such as axes=3,2,1. Also it can be changed via sysfs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (hp_accel) Add HP Mini 510x family supportMasanari Iida
This patch is an enhanced version of Takashi Iwai's [PATCH] hp_accel: Add quirks for HP ProBook 532x and HP Mini 5102 My HP Mini 5101 works fine with this patch. Confirmed with Tux Racer. Signed-off by: Masanari Iida <standby24x7@gmail.com> Acked-by: Takashi Iwai <tiwai@suse.de> Cc: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25hwmon: (lis3) Add support for new LIS3DC / HP3DC chipTakashi Iwai
A new version of LIS3 chip has slight incompatibilities from former versions. This patch adds the minimal support for it. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: remove inclusion of unnecessary headers from {core, pkg, ↵Jan Beulich
via-cpu}temp.c These likely originate from these drivers being clones of one another and/or other drivers which actually needed these includes. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: (coretemp) cosmetic cleanupJan Beulich
"break" after "return" is at best bogus (good compilers even warn about the "break" being unreachable). Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25x86/hwmon: {core, pkg, via}cpu_temp_device_remove() can all be __cpuinitJan Beulich
... as they're being called only from a __cpuinit function. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25netfilter: fix module dependency issues with IPv6 defragmentation, ip6tables ↵KOVACS Krisztian
and xt_TPROXY One of the previous tproxy related patches split IPv6 defragmentation and connection tracking, but did not correctly add Kconfig stanzas to handle the new dependencies correctly. This patch fixes that by making the config options mirror the setup we have for IPv4: a distinct config option for defragmentation that is automatically selected by both connection tracking and xt_TPROXY/xt_socket. The patch also changes the #ifdefs enclosing IPv6 specific code in xt_socket and xt_TPROXY: we only compile these in case we have ip6tables support enabled. Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25Merge branch 'nfs-for-2.6.37' of ↵Linus Torvalds
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (67 commits) SUNRPC: Cleanup duplicate assignment in rpcauth_refreshcred nfs: fix unchecked value Ask for time_delta during fsinfo probe Revalidate caches on lock SUNRPC: After calling xprt_release(), we must restart from call_reserve NFSv4: Fix up the 'dircount' hint in encode_readdir NFSv4: Clean up nfs4_decode_dirent NFSv4: nfs4_decode_dirent must clear entry->fattr->valid NFSv4: Fix a regression in decode_getfattr NFSv4: Fix up decode_attr_filehandle() to handle the case of empty fh pointer NFS: Ensure we check all allocation return values in new readdir code NFS: Readdir plus in v4 NFS: introduce generic decode_getattr function NFS: check xdr_decode for errors NFS: nfs_readdir_filler catch all errors NFS: readdir with vmapped pages NFS: remove page size checking code NFS: decode_dirent should use an xdr_stream SUNRPC: Add a helper function xdr_inline_peek NFS: remove readdir plus limit ...
2010-10-25perf python scripting: Improve the syscalls-by-pid scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall names . Accept both pid (if numeric) or COMM name Now it looks like this: [root@emilia tmp]# perf trace syscall-counts-by-pid Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- automount [1670] futex 2 sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 perf [15178] read 2506 open 794 close 769 write 240 getdents 112 lseek 16 stat 9 perf_counter_open 5 fcntl 5 mmap 5 statfs 2 perf [15179] read 56701 open 499 stat 176 fstat 149 close 109 mmap 98 brk 75 rt_sigaction 66 munmap 42 mprotect 24 lstat 7 lseek 5 getdents 4 ioctl 3 readlink 2 futex 1 statfs 1 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 write 1 [root@emilia tmp]# fg -bash: fg: current: no such job [root@emilia tmp]# perf trace syscall-counts-by-pid 2322 Press control+C to stop and show the summary ^C syscall events by comm/pid: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# perf trace syscall-counts-by-pid sshd Press control+C to stop and show the summary ^C syscall events for sshd: comm [pid]/syscalls count ---------------------------------------- ---------- sshd [2322] rt_sigprocmask 4 select 2 write 1 read 1 [root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: print the syscall name on sctopArnaldo Carvalho de Melo
[root@emilia tmp]# perf trace sctop 1 syscall events: event count ---------------------------------------- ---------- read 215400 futex 4029 write 376 brk 33 rt_sigprocmask 24 select 17 lseek 2 fsync 1 ^C[root@emilia tmp]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25perf python scripting: Improve the syscalls-counts scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall name Now it looks like this: [root@emilia ~]# perf trace syscall-counts Press control+C to stop and show the summary ^C syscall events: event count ---------------------------------------- ----------- read 102752 open 1293 close 878 write 319 stat 185 fstat 149 getdents 116 mmap 98 brk 80 rt_sigaction 66 munmap 42 mprotect 24 lseek 21 lstat 7 rt_sigprocmask 4 futex 3 statfs 3 ioctl 3 readlink 2 select 2 getegid 1 geteuid 1 getgid 1 getuid 1 getrlimit 1 fcntl 1 uname 1 [root@emilia ~]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25perf python scripting: Improve the failed-syscalls-by-pid scriptArnaldo Carvalho de Melo
. Print message at script start telling how to get te summary . Print the syscall name using the audit-lib-python package, if installed . Print the errno string . Accept both pid (if numeric) or COMM name Now it looks like this: [root@emilia ~]# perf trace failed-syscalls-by-pid Press control+C to stop and show the summary ^C syscall errors: comm [pid] count ------------------------------ ---------- automount [1670] syscall: futex err = ETIMEDOUT 39 irqbalance [1462] syscall: openat err = ENOENT 4 perf [7888] syscall: lseek err = ESPIPE 1 syscall: open err = ENOENT 24 perf [7889] syscall: ioctl err = EINVAL 1 syscall: readlink err = EINVAL 2 syscall: open err = ENOENT 389 syscall: stat err = ENOENT 141 syscall: lseek err = ESPIPE 3 [root@emilia ~]# [root@emilia ~]# perf trace failed-syscalls-by-pid 1670 Press control+C to stop and show the summary ^C syscall errors: comm [pid] count ------------------------------ ---------- automount [1670] syscall: futex err = ETIMEDOUT 2 [root@emilia ~]# [root@emilia ~]# [root@emilia ~]# [root@emilia ~]# perf trace failed-syscalls-by-pid automount Press control+C to stop and show the summary ^C syscall errors for automount: comm [pid] count ------------------------------ ---------- automount [1669] syscall: futex err = ETIMEDOUT 1 automount [1670] syscall: futex err = ETIMEDOUT 5 [root@emilia ~]# Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-10-25tunnels: add _rcu annotationsEric Dumazet
(struct ip6_tnl)->next is rcu protected : (struct ip_tunnel)->next is rcu protected : (struct xfrm6_tunnel)->next is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25net/802: add __rcu annotationsEric Dumazet
(struct net_device)->garp_port is rcu protected : (struct garp_port)->applicants is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25ipv6: ip6_ptr rcu annotationsEric Dumazet
(struct net_device)->ip6_ptr is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25vlan: rcu annotationsEric Dumazet
(struct net_device)->vlgrp is rcu protected : add __rcu annotation and proper rcu primitives. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25tms380tr: Use mdelay() in tms380tr_wait().David S. Miller
This driver tries to do up to half-second udelay() calls, which overflows on x86-64. Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25net: Increase xmit RECURSION_LIMIT to 10.David S. Miller
Three is definitely too low, and we know from reports that GRE tunnels stacked as deeply as 37 levels cause stack overflows, so pick some reasonable value between those two. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25mlx4_en: Fix out of bounds array accessEli Cohen
When searching for a free entry in either mlx4_register_vlan() or mlx4_register_mac(), and there is no free entry, the loop terminates without updating the local variable free thus causing out of array bounds access. Fix this by adding a proper check outside the loop. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25macb: Don't re-enable interrupts while in polling modeJoshua Hoke
On a busy network, the macb driver could get stuck in the interrupt handler, quickly triggering the watchdog, due to a confluence of factors: 1. macb_poll re-enables interrupts unconditionally, even when it will be called again because it exhausted its rx budget 2. macb_interrupt only disables interrupts after scheduling macb_poll, but scheduling fails when macb_poll is already scheduled because it didn't call napi_complete 3. macb_interrupt loops until the interrupt status register is clear, which will never happen in this case if the driver doesn't disable the RX interrupt Since macb_interrupt runs in interrupt context, this effectively locks up the machine, triggering the hardware watchdog. This issue was readily reproducible on a flooded network with a modified 2.6.27.48 kernel. The same problem appears to still be in the 2.6.36-rc8 driver code, so I am submitting this patch against that version. I have not tested this version of the patch except to make sure the kernel compiles. Signed-off-by: Joshua Hoke <joshua.hoke@sixnet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Fix CSO for UDP packetsSomnath Kotur
We're setting skb->ip_summed to CHECKSUM_NONE for all non-TCP pkts, making the stack recompute checksum.This is a bug for UDP pkts for which cso must be used. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25be2net: Call netif_carier_off() after register_netdev()Somnath Kotur
Calling netif_carrier_off before register_netdev was causing the network interface to miss a linkwatch pending event leading to an inconsistent state if the link is not up when interface is initialized.This is now invoked after register_netdev. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25cxgb3: fix device opening error pathDivy Le Ray
Only negative return from bind_qsets() should be considered an error and propagated. It fixes an issue reported by IBM on P Series platform. Signed-off-by: Divy Le Ray <divy@chelsio.com> Tested-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25iwlwifi: quiet a noisy printkDon Fry
Timing issues in microcode for some devices can cause a compressed BA to be sent to the driver prior to returning any a-MPDU notification. Traces show RTS-CTS is exchanged and then the timer fires which causes an empty BA to be sent which acknowledges nothing. This results in a noisy printk. Only print the message if the bitmap is non-zero. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25ath9k: resume aggregation immediately after a hardware resetFelix Fietkau
Since aggregation is usually triggered by tx completion, a hardware reset (because of beacon stuck, tx hang or baseband hang) can significantly delay the transmission of the next AMPDU (until the next tx completion event). Fix this by rescheduling aggregation after such a reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25carl9170: fix scheduling while atomicChristian Lamparter
This patch fixes the following mishap: BUG: scheduling while atomic: wpa_supplicant/4164/0x00000002 Modules linked in: carl9170 mac80211 [...] Pid: 4164, comm: wpa_supplicant Not tainted 2.6.36-wl+ #119 Call Trace: [<c13779a9>] ? schedule+0x349/0x4c0 [<c13780d6>] ? schedule_timeout+0x106/0x1e0 [<c1037f50>] ? process_timeout+0x0/0x10 [<c1377e8d>] ? wait_for_common+0x9d/0x140 [<c1029110>] ? default_wake_function+0x0/0x10 [<f80c6080>] ? carl9170_exec_cmd+0xf0/0x250 [carl9170] [<f80c695e>] ? carl9170_set_mac_reg+0x5e/0x70 [carl9170] [<f80c3f76>] ? carl9170_op_add_interface+0x176/0x310 [carl9170] [...] rcu_read_unlock() call was erroneously placed after the sync. function carl9170_mod_virtual_mac. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-09-20 23:30:07 +0000