| Age | Commit message (Collapse) | Author |
|---|
|
Fixes checkpatch warning:
WARNING: prefer 'help' over '---help---' for new help texts
Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Breaks long lines in rf69.c, fixing checkpatch.pl warnings:
"WARNING: line over 80 characters"
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Breaks long lines in rf69.h, fixing checkpatch.pl warnings:
"WARNING: line over 80 characters"
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pi433_write requires locking due to multiple writers. After acquiring
the lock check if enough free space is available in the kfifo to write
the whole message. This check should prevent partial writes to tx_fifo
so kfifo_reset is not needed anymore.
pi433_tx_thread is the only reader so it does not require locking
after kfifo_reset is removed.
Signed-off-by: Valentin Vidic <Valentin.Vidic@CARNet.hr>
Reviewed-by: Marcus Wolf <marcus.wolf@wolf-entwicklungen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Wrap comment to fix warning "prefer a maximum 75 chars per line"
Signed-off-by: Gaurav Dhingra <gauravdhingra.gxyd@gmail.com>
Acked-by: Vaibhav Agarwal <vaibhav.sr@gmail.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dma_addr field of msdc_host is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The cmd_rsp_done field of msdc_host is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The field cmd_r1b_done in msdc_host is unused, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dma_left_size field of msdc_host is never used, remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The reserved field of msdc_host is never used and msdc_host is also
never exposed to hardware, so remove that field.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The starttime field of msdc_host is never used, remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current default transfer is to use DMA or not depending on the
size of the data. The upstream driver mtk-sd uses DMA all times,
change the standard mode here to DMA for testing, if there are any
performance problems with DMA for small data sizes. If not, the option
for transfer mode should be removed in the future,
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The msdc_init_gpd_bd function is currently hard to read, because of
old, commented out code and a while loop, where a for loop is much
easier to read. Refactor it to make the code more readable.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The xfersz field of msdc_dma is only set to host->xfer_size and this
is also available at the (few) positions, where dma.xfersz is used, so
it is removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The flags of msdc_dma are set to a constant value, so block and dword
padding are disabled and checksum is enabled. By removing the field
the code is easier to read and the difference to the mtk-sd driver is
smaller.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fields used_gpd|bd in struct msdc_dma are only set and reset, but
never used, so remove them. The other removed fields are never used,
so they were removed either.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the msdc_dma_config function has some variables, that are
not needed, uses the macro msdc_init_bd that is only used here and
does not use the for_each_sg iterator. That last fact could cause a
bug if the scatterlist is chained.
The function is changed to remove these things, but none of the
changes should change the behavior of it (despite the case of a linked
scatterlist).
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The msdc_dma_dump function is disabled by a preprocessor macro, was
only used in the msdc_dma_setup function. The code also contains no
information about the device, it only dumps some memory for debug.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The burstsz field in msdc_dma is set to a constant value and later
only used two times, using the constant directly in that places allows
to remove the field and improves readability.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The data_offset field in msdc_hw is never used, so remove it.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current code just busy waits with nop for clock becoming stable,
relaxing the cpu here improves readability and portability and also
removes a unnecessary difference with the mtk-sd driver.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MT7621|7628_FPGA config flags are non existent in the tree, so
code guarded by this flags can be removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the current code the hardware reset is realised via a macro and
does only wait for a certain ammount of time for the controller to
come out of reset state, but it should wait until it IS out of reset
state. So it is refactored to improve this, it is also changed from a
macro to a function and renamed to msdc_reset_hw to match the mtk-sd
driver.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ext_power_on|off fields of msdc_hw are never set, and only once
checked for not being zero, so they can just be removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The enable|disable_sdio_irq() fields of msdc_hw are never set, so when
they are called, they are null pointer. In case of the
MSDC_EXT_SDIO_IRQ flag set in msdc0_hw, this happens. But because
these fields are never set, they can simply be removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The disable_cd_eirq() field of msdc_hw is never set and only once
checked for being non zero, so it is deleted.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The enable_cd_eirq() field of msdc_hw is never set and only once
checked for not being zero, so it is removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The get_cd_status() field of msdc_hw is never set and there is only
one check for it being non zero, so it is deleted.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The board.h file contins lot of never used code, to clean up the
driver, this code is removed.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the owner assignment form the platform driver as
platform_driver_register() already initializes the owner.
Found using coccinelle.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the owner assignment form the platform driver as
platform_driver_register() already initializes the owner.
Found using coccinelle.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the owner assignment form the platform driver as
platform_driver_register() already initializes the owner.
Found using coccinelle.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The opcode check in msdc_command_start is redundant in case of
MMC_SET_RELATIVE_ADDR, this is 3 like SD_SEND_RELATIVE_ADDR, so the
second check can be removed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
copy_from_user() returns a positive value in case of an error, to fix
this the check is turned around, also a better return value is chosen.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the debug file in proc fs is world writable, remove the
access for other.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If the debug file in proc fs is not successfully created current code
prints an error message, this is removed. de is also not an error
pointer, so the IS_ERR() call leads to a static checker warning. The
unused return value of the msdc_debug_proc_init function is also removed.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MSDC_HIGHSPEED flag is always set and never unset, remove it to
clean up the code.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions msdc_eirq_cd and msdc_eirq_sdio are defined but never
used, so they are removed. This also fixes two compiler warnings:
drivers/staging/mt7621-mmc/sd.c:517:13: warning: ‘msdc_eirq_cd’ defined but
not used [-Wunused-function]
static void msdc_eirq_cd(void *data)
^~~~~~~~~~~~
drivers/staging/mt7621-mmc/sd.c:507:13: warning: ‘msdc_eirq_sdio’ defined but
not used [-Wunused-function]
static void msdc_eirq_sdio(void *data)
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mt6575_host variable is never used, only set and
exported. Removing it for code cleanup.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The MSDC_SYS_SUSPEND flag is always set and is never unset. Removing
it cleans up the code.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The mmc_suspend|resume_host functions have been decrepated in the
3.11 [1] release and were completely removed in 3.13 [2]. Removing the
calls to this functions as it was done for other mmc host drivers
before the old api was removed (eg. [3]) fixes compile errors in this
driver while CONFIG_PM is enabled.
The rest of the removed code is simply dead, the MSDC_SYS_SUSPEND flag
is always set and will be removed in a later patch.
[1] commit 986892ca78ee ("mmc: core: Initiate suspend|resume from mmc bus instead of mmc host")
[2] commit 3c0d22e8180b ("mmc: core: Remove deprecated mmc_suspend|resume_host APIs")
[3] commit 1e63d4854202 ("mmc: au1xmmc: Move away from using deprecated APIs")
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove defines that are both in board.h and sd.c from sd.c, this file
already includes board.h
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The request of the irq line is not correctly handled by the current
code, platform_get_irq may fail and if the irq is requested via
devm_request_irq, its release is automatically done.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dma_alloc_coherent (and also dma_free_coherent) should get the
device, the dma memory is allocated for as the first parameter.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The probe function contains lots of code, that is never used, because
the fields it checks for in the msdc_hw structure are never
initialized. Removing them should be safe.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Current code saves the need for polling in a global variable, that
leeds to problems, when the driver should handle multiple devices with
different capabilities. By looking up the capability in the mmc_host
capabilities, they now have per device scope.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the unnecessary field data_pins from msdc_hw, later this
information should be taken from the device tree.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In the probe function, pdev->dev.platform_data is set to &msdc0_hw,
but the only get access to that is also in the probe function. So that
assignment is removed. The msdc0_hw structure is still available to the
driver as part of the msdc_host structure.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In case of dma_alloc_coherent failing the current code just called
BUG_ON. By adding error handling for that case this can be avoided.
This also fixes a memory leek in case of a fail later on in the probe
function.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
