summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-27platform/x86/intel: pmc/core: Use kobj_to_dev()Minghao Chi
Use kobj_to_dev() instead of open-coding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220425105525.3515831-1-chi.minghao@zte.com.cn Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86/intel: pmc/core: change pmc_lpm_modes to staticTom Rix
Sparse reports this issue core.c: note: in included file: core.h:239:12: warning: symbol 'pmc_lpm_modes' was not declared. Should it be static? Global variables should not be defined in headers. This only works because core.h is only included by core.c. Single file use variables should be static, so change its storage-class specifier to static. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220423123048.591405-1-trix@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86/intel/sdsi: Fix bug in multi packet readsDavid E. Box
Fix bug that added an offset to the mailbox addr during multi-packet reads. Did not affect current ABI since it doesn't support multi-packet transactions. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-4-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86/intel/sdsi: Poll on ready bit for writesDavid E. Box
Due to change in firmware flow, update mailbox writes to poll on ready bit instead of run_busy bit. This change makes the polling method consistent for both writes and reads, which also uses the ready bit. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-3-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86/intel/sdsi: Handle leaky bucketDavid E. Box
To prevent an agent from indefinitely holding the mailbox firmware has implemented a leaky bucket algorithm. Repeated access to the mailbox may now incur a delay of up to 2.1 seconds. Add a retry loop that tries for up to 2.5 seconds to acquire the mailbox. Fixes: 2546c6000430 ("platform/x86: Add Intel Software Defined Silicon driver") Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20220420155622.1763633-2-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86: intel-uncore-freq: Prevent driver loading in guestsSrinivas Pandruvada
Loading this driver in guests results in unchecked MSR access error for MSR 0x620. There is no use of reading and modifying package/die scope uncore MSRs in guests. So check for CPU feature X86_FEATURE_HYPERVISOR to prevent loading of this driver in guests. Fixes: dbce412a7733 ("platform/x86/intel-uncore-freq: Split common and enumeration part") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215870 Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220427100304.2562990-1-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboardDarryn Anton Jordan
This works on my system. Signed-off-by: Darryn Anton Jordan <darrynjordan@icloud.com> Acked-by: Thomas Weißschuh <thomas@weissschuh.net> Link: https://lore.kernel.org/r/Ylguq87YG+9L3foV@hark Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86: dell-laptop: Add quirk entry for Latitude 7520Gabriele Mazzotta
The Latitude 7520 supports AC timeouts, but it has no KBD_LED_AC_TOKEN and so changes to stop_timeout appear to have no effect if the laptop is plugged in. Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20220426120827.12363-1-gabriele.mzt@gmail.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27iocost: don't reset the inuse weight of under-weighted debtorsTejun Heo
When an iocg is in debt, its inuse weight is owned by debt handling and should stay at 1. This invariant was broken when determining the amount of surpluses at the beginning of donation calculation - when an iocg's hierarchical weight is too low, the iocg is excluded from donation calculation and its inuse is reset to its active regardless of its indebtedness, triggering warnings like the following: WARNING: CPU: 5 PID: 0 at block/blk-iocost.c:1416 iocg_kick_waitq+0x392/0x3a0 ... RIP: 0010:iocg_kick_waitq+0x392/0x3a0 Code: 00 00 be ff ff ff ff 48 89 4d a8 e8 98 b2 70 00 48 8b 4d a8 85 c0 0f 85 4a fe ff ff 0f 0b e9 43 fe ff ff 0f 0b e9 4d fe ff ff <0f> 0b e9 50 fe ff ff e8 a2 ae 70 00 66 90 0f 1f 44 00 00 55 48 89 RSP: 0018:ffffc90000200d08 EFLAGS: 00010016 ... <IRQ> ioc_timer_fn+0x2e0/0x1470 call_timer_fn+0xa1/0x2c0 ... As this happens only when an iocg's hierarchical weight is negligible, its impact likely is limited to triggering the warnings. Fix it by skipping resetting inuse of under-weighted debtors. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rik van Riel <riel@surriel.com> Fixes: c421a3eb2e27 ("blk-iocost: revamp debt handling") Cc: stable@vger.kernel.org # v5.10+ Link: https://lore.kernel.org/r/YmjODd4aif9BzFuO@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-27platform/x86: asus-wmi: Fix driver not binding when fan curve control probe ↵Hans de Goede
fails Before this commit fan_curve_check_present() was trying to not cause the probe to fail on devices without fan curve control by testing for known error codes returned by asus_wmi_evaluate_method_buf(). Checking for ENODATA or ENODEV, with the latter being returned by this function when an ACPI integer with a value of ASUS_WMI_UNSUPPORTED_METHOD is returned. But for other ACPI integer returns this function just returns them as is, including the ASUS_WMI_DSTS_UNKNOWN_BIT value of 2. On the Asus U36SD ASUS_WMI_DSTS_UNKNOWN_BIT gets returned, leading to: asus-nb-wmi: probe of asus-nb-wmi failed with error 2 Instead of playing whack a mole with error codes here, simply treat all errors as there not being any fan curves, fixing the driver no longer loading on the Asus U36SD laptop. Fixes: e3d13da7f77d ("platform/x86: asus-wmi: Fix regression when probing for fan curve control") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2079125 Cc: Luke D. Jones <luke@ljones.dev> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220427114956.332919-1-hdegoede@redhat.com
2022-04-27platform/x86: asus-wmi: Potential buffer overflow in ↵Dan Carpenter
asus_wmi_evaluate_method_buf() This code tests for if the obj->buffer.length is larger than the buffer but then it just does the memcpy() anyway. Fixes: 0f0ac158d28f ("platform/x86: asus-wmi: Add support for custom fan curves") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220413073744.GB8812@kili Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27platform/x86: amd-pmc: Shuffle location of amd_pmc_get_smu_version()Nathan Chancellor
When CONFIG_DEBUG_FS is disabled, amd_pmc_get_smu_version() is unused: drivers/platform/x86/amd-pmc.c:196:12: warning: unused function 'amd_pmc_get_smu_version' [-Wunused-function] static int amd_pmc_get_smu_version(struct amd_pmc_dev *dev) ^ 1 warning generated. Eliminate the warning by moving amd_pmc_get_smu_version() to the CONFIG_DEBUG_FS block where it is used. Fixes: b0c07116c894 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220418213800.21257-1-nathan@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-04-27x86/aperfmperf: Separate AP/BP frequency invariance initThomas Gleixner
This code is convoluted and because it can be invoked post init via the ACPI/CPPC code, all of the initialization functionality is built in instead of being part of init text and init data. As a first step create separate calls for the boot and the application processors. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.536733494@linutronix.de
2022-04-27x86/smp: Move APERF/MPERF code where it belongsThomas Gleixner
as this can share code with the preexisting APERF/MPERF code. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.478362457@linutronix.de
2022-04-27x86/aperfmperf: Dont wake idle CPUs in arch_freq_get_on_cpu()Thomas Gleixner
aperfmperf_get_khz() already excludes idle CPUs from APERF/MPERF sampling and that's a reasonable decision. There is no point in sending up to two IPIs to an idle CPU just because someone reads a sysfs file. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220415161206.419880163@linutronix.de
2022-04-27netfilter: conntrack: fix udp offload timeout sysctlVolodymyr Mytnyk
`nf_flowtable_udp_timeout` sysctl option is available only if CONFIG_NFT_FLOW_OFFLOAD enabled. But infra for this flow offload UDP timeout was added under CONFIG_NF_FLOW_TABLE config option. So, if you have CONFIG_NFT_FLOW_OFFLOAD disabled and CONFIG_NF_FLOW_TABLE enabled, the `nf_flowtable_udp_timeout` is not present in sysfs. Please note, that TCP flow offload timeout sysctl option is present even CONFIG_NFT_FLOW_OFFLOAD is disabled. I suppose it was a typo in commit that adds UDP flow offload timeout and CONFIG_NF_FLOW_TABLE should be used instead. Fixes: 975c57504da1 ("netfilter: conntrack: Introduce udp offload timeout configuration") Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-27netfilter: nf_conntrack_tcp: re-init for syn packets onlyFlorian Westphal
Jaco Kroon reported tcp problems that Eric Dumazet and Neal Cardwell pinpointed to nf_conntrack tcp_in_window() bug. tcp trace shows following sequence: I > R Flags [S], seq 3451342529, win 62580, options [.. tfo [|tcp]> R > I Flags [S.], seq 2699962254, ack 3451342530, win 65535, options [..] R > I Flags [P.], seq 1:89, ack 1, [..] Note 3rd ACK is from responder to initiator so following branch is taken: } else if (((state->state == TCP_CONNTRACK_SYN_SENT && dir == IP_CT_DIR_ORIGINAL) || (state->state == TCP_CONNTRACK_SYN_RECV && dir == IP_CT_DIR_REPLY)) && after(end, sender->td_end)) { ... because state == TCP_CONNTRACK_SYN_RECV and dir is REPLY. This causes the scaling factor to be reset to 0: window scale option is only present in syn(ack) packets. This in turn makes nf_conntrack mark valid packets as out-of-window. This was always broken, it exists even in original commit where window tracking was added to ip_conntrack (nf_conntrack predecessor) in 2.6.9-rc1 kernel. Restrict to 'tcph->syn', just like the 3rd condtional added in commit 82b72cb94666 ("netfilter: conntrack: re-init state for retransmitted syn-ack"). Upon closer look, those conditionals/branches can be merged: Because earlier checks prevent syn-ack from showing up in original direction, the 'dir' checks in the conditional quoted above are redundant, remove them. Return early for pure syn retransmitted in reply direction (simultaneous open). Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Jaco Kroon <jaco@uls.co.za> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-04-27x86/split-lock: Remove unused TIF_SLD bitTony Luck
Changes to the "warn" mode of split lock handling mean that TIF_SLD is never set. Remove the bit, and the functions that use it. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220310204854.31752-3-tony.luck@intel.com
2022-04-27x86/split_lock: Make life miserable for split lockersTony Luck
In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said: Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain. He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux. Existing code has three options for applications: 1) Don't enable split lock detection (allow arbitrary split locks) 2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled 3) Kill process that use split locks Option 2 falls into the "wishful thinking" territory that Thomas warns does nothing. But option 3 might not be viable in a situation with legacy applications that need to run. Hence make option 2 much stricter to "slow it down in a way which makes it annoying". Primary reason for this change is to provide better quality of service to the rest of the applications running on the system. Internal testing shows that even with many processes splitting locks, performance for the rest of the system is much more responsive. The new "warn" mode operates like this. When an application tries to execute a bus lock the #AC handler. 1) Delays (interruptibly) 10 ms before moving to next step. 2) Blocks (interruptibly) until it can get the semaphore If interrupted, just return. Assume the signal will either kill the task, or direct execution away from the instruction that is trying to get the bus lock. 3) Disables split lock detection for the current core 4) Schedules a work queue to re-enable split lock detect in 2 jiffies 5) Returns The work queue that re-enables split lock detection also releases the semaphore. There is a corner case where a CPU may be taken offline while split lock detection is disabled. A CPU hotplug handler handles this case. Old behaviour was to only print the split lock warning on the first occurrence of a split lock from a task. Preserve that by adding a flag to the task structure that suppresses subsequent split lock messages from that task. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20220310204854.31752-2-tony.luck@intel.com
2022-04-27ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callbackAjit Kumar Pandey
We are accessing "desc->ops" in sof_pci_probe without checking "desc" pointer. This results in NULL pointer exception if pci_id->driver_data i.e desc pointer isn't defined in sof device probe: BUG: kernel NULL pointer dereference, address: 0000000000000060 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci] Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4. RSP: 0018:ffffac4b03b9b8d8 EFLAGS: 00010246 Add NULL pointer check for sof_dev_desc pointer to avoid such exception. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220426183357.102155-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-27x86/pm: Fix false positive kmemleak report in msr_build_context()Matthieu Baerts
Since e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume") kmemleak reports this issue: unreferenced object 0xffff888009cedc00 (size 256): comm "swapper/0", pid 1, jiffies 4294693823 (age 73.764s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 48 00 00 00 00 00 00 00 ........H....... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: msr_build_context (include/linux/slab.h:621) pm_check_save_msr (arch/x86/power/cpu.c:520) do_one_initcall (init/main.c:1298) kernel_init_freeable (init/main.c:1370) kernel_init (init/main.c:1504) ret_from_fork (arch/x86/entry/entry_64.S:304) Reproducer: - boot the VM with a debug kernel config (see https://github.com/multipath-tcp/mptcp_net-next/issues/268) - wait ~1 minute - start a kmemleak scan The root cause here is alignment within the packed struct saved_context (from suspend_64.h). Kmemleak only searches for pointers that are aligned (see how pointers are scanned in kmemleak.c), but pahole shows that the saved_msrs struct member and all members after it in the structure are unaligned: struct saved_context { struct pt_regs regs; /* 0 168 */ /* --- cacheline 2 boundary (128 bytes) was 40 bytes ago --- */ u16 ds; /* 168 2 */ ... u64 misc_enable; /* 232 8 */ bool misc_enable_saved; /* 240 1 */ /* Note below odd offset values for the remainder of this struct */ struct saved_msrs saved_msrs; /* 241 16 */ /* --- cacheline 4 boundary (256 bytes) was 1 bytes ago --- */ long unsigned int efer; /* 257 8 */ u16 gdt_pad; /* 265 2 */ struct desc_ptr gdt_desc; /* 267 10 */ u16 idt_pad; /* 277 2 */ struct desc_ptr idt; /* 279 10 */ u16 ldt; /* 289 2 */ u16 tss; /* 291 2 */ long unsigned int tr; /* 293 8 */ long unsigned int safety; /* 301 8 */ long unsigned int return_address; /* 309 8 */ /* size: 317, cachelines: 5, members: 25 */ /* last cacheline: 61 bytes */ } __attribute__((__packed__)); Move misc_enable_saved to the end of the struct declaration so that saved_msrs fits in before the cacheline 4 boundary. The comment above the saved_context declaration says to fix wakeup_64.S file and __save/__restore_processor_state() if the struct is modified: it looks like all the accesses in wakeup_64.S are done through offsets which are computed at build-time. Update that comment accordingly. At the end, the false positive kmemleak report is due to a limitation from kmemleak but it is always good to avoid unaligned members for optimisation purposes. Please note that it looks like this issue is not new, e.g. https://lore.kernel.org/all/9f1bb619-c4ee-21c4-a251-870bd4db04fa@lwfinger.net/ https://lore.kernel.org/all/94e48fcd-1dbd-ebd2-4c91-f39941735909@molgen.mpg.de/ [ bp: Massage + cleanup commit message. ] Fixes: 7a9c2dd08ead ("x86/pm: Introduce quirk framework to save/restore extra MSR registers around suspend/resume") Suggested-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220426202138.498310-1-matthieu.baerts@tessares.net
2022-04-27hwmon: (pmbus) delta-ahe50dc-fan: work around hardware quirkZev Weiss
CLEAR_FAULTS commands can apparently sometimes trigger catastrophic power output glitches on the ahe-50dc, so block them from being sent at all. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220427035109.3819-1-zev@bewilderbeest.net Fixes: d387d88ed045 ("hwmon: (pmbus) Add Delta AHE-50DC fan control module driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-04-27x86/sev: Get the AP jump table address from secrets pageBrijesh Singh
The GHCB specification section 2.7 states that when SEV-SNP is enabled, a guest should not rely on the hypervisor to provide the address of the AP jump table. Instead, if a guest BIOS wants to provide an AP jump table, it should record the address in the SNP secrets page so the guest operating system can obtain it directly from there. Fix this on the guest kernel side by having SNP guests use the AP jump table address published in the secrets page rather than issuing a GHCB request to get it. [ mroth: - Improve error handling when ioremap()/memremap() return NULL - Don't mix function calls with declarations - Add missing __init - Tweak commit message ] Fixes: 0afb6b660a6b ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs") Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220422135624.114172-3-michael.roth@amd.com
2022-04-27x86/sev: Add missing __init annotations to SEV init routinesMichael Roth
Currently, get_secrets_page() is only reachable from the following call chain: __init snp_init_platform_device(): get_secrets_page() so mark it as __init as well. This is also needed since it calls early_memremap(), which is also an __init routine. Similarly, get_jump_table_addr() is only reachable from the following call chain: __init setup_real_mode(): sme_sev_setup_real_mode(): sev_es_setup_ap_jump_table(): get_jump_table_addr() so mark get_jump_table_addr() and everything up that call chain as __init as well. This is also needed since future patches will add a call to get_secrets_page(), which needs to be __init due to the reasons stated above. Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Michael Roth <michael.roth@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220422135624.114172-2-michael.roth@amd.com
2022-04-27virt: sevguest: Rename the sevguest dir and files to sev-guestTom Lendacky
Rename the drivers/virt/coco/sevguest directory and files to sev-guest so as to match the driver name. [ bp: Rename Documentation/virt/coco/sevguest.rst too, as reported by sfr: https://lore.kernel.org/r/20220427101059.3bf55262@canb.auug.org.au ] Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/2f5c9cb16e3a67599c8e3170f6c72c8712c47d53.1650464054.git.thomas.lendacky@amd.com
2022-04-27s390/irq: utilize RCU instead of irq_lock_sparse() in show_msi_interrupt()Pingfan Liu
As demonstrated by commit 74bdf7815dfb ("genirq: Speedup show_interrupts()"), irq_desc can be accessed safely in RCU read section. Hence here resorting to rcu read lock to get rid of irq_lock_sparse(). Signed-off-by: Pingfan Liu <kernelfans@gmail.com> Link: https://lore.kernel.org/r/20220422100212.22666-1-kernelfans@gmail.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-04-27s390: disable -Warray-boundsSven Schnelle
gcc-12 shows a lot of array bound warnings on s390. This is caused by the S390_lowcore macro which uses a hardcoded address of 0. Wrapping that with absolute_pointer() works, but gcc no longer knows that a 12 bit displacement is sufficient to access lowcore. So it emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a single load/store instruction. As s390 stores variables often read/written in lowcore, this is considered problematic. Therefore disable -Warray-bounds on s390 for gcc-12 for the time being, until there is a better solution. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Link: https://lore.kernel.org/r/yt9dzgkelelc.fsf@linux.ibm.com Link: https://lore.kernel.org/r/20220422134308.1613610-1-svens@linux.ibm.com Link: https://lore.kernel.org/r/20220425121742.3222133-1-svens@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2022-04-27Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/netDavid S. Miller
-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-26 This series contains updates to ice driver only. Ivan Vecera removes races related to VF message processing by changing mutex_trylock() call to mutex_lock() and moving additional operations to occur under mutex. Petr Oros increases wait time after firmware flash as current time is not sufficient. Jake resolves a use-after-free issue for mailbox snapshot. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-27mtd: spi-nor: micron-st: Remove status polling on volatile registers writeTudor Ambarus
Writing volatile registers are instant according to Micron and do not need any status polling. Remove status polling on volatile registers write. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-12-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: spansion: Remove status polling on volatile registers writeTudor Ambarus
Writing volatile registers are instant according to Cypress and do not need any status polling. Remove status polling on volatile registers write. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-11-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: Introduce templates for SPI NOR operationsTudor Ambarus
Clean the op declaration and hide the details of each op. With this it results a cleanner, easier to read code. No functional change expected. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Acked-by: Michael Walle <michael@walle.cc> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220420103427.47867-10-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()Tudor Ambarus
Introduce template operation to remove code duplication. Split spi_nor_cypress_octal_dtr_enable() in spi_nor_cypress_octal_dtr_ena() spi_nor_cypress_octal_dtr_dis() as it no longer made sense to try to keep everything alltogether: too many "if (enable)" throughout the code, which made the code difficult to read. Add debug messages in case spi_nor_read_id() fails. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-9-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: micron-st: Rework spi_nor_micron_octal_dtr_enable()Tudor Ambarus
Introduce template operation to remove code duplication. Split spi_nor_micron_octal_dtr_enable() in spi_nor_micron_octal_dtr_en() and spi_nor_micron_octal_dtr_dis() as it no longer made sense to try to keep everything alltogether: too many "if (enable)" throughout the code, which made the code difficult to follow. Add dev_dbg messages in case spi_nor_read_id() fails. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-8-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: core: Add helpers to read/write any registerTudor Ambarus
There are manufacturers that use registers indexed by address. Some of them support "read/write any register" opcodes. Provide core methods that can be used by all manufacturers. SPI NOR controller ops are intentionally not supported as we intend to move all the SPI NOR controller drivers under the SPI subsystem. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-7-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: manufacturers: Use spi_nor_read_id() core methodTudor Ambarus
Use spi_nor_read_id() core method to avoid duplication of code. Now the ID is read on the full SPI_NOR_MAX_ID_LEN instead of round_up(nor->info->id_len, 2), but it doesn't harm to read more ID bytes, so the change comes with no secondary effects. dev_dbg messages in case spi_nor_read_id() fails, will be added in a further patch after we split the octal DTR enable/disable methods. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-6-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: core: Introduce method for RDID opTudor Ambarus
RDID is used in the core to auto detect the flash, but also by some manufacturer drivers that contain flashes that support Octal DTR mode, so that they can read the flash ID after the switch to Octal DTR was made to test if the switch was successful. Introduce a core method for RDID op to avoid code duplication. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-5-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: core: Use auto-detection only onceTudor Ambarus
In case spi_nor_match_name() returned NULL, the auto detection was issued twice. There's no reason to try to detect the same chip twice, do the auto detection only once. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-4-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: Introduce spi_nor_match_id()Tudor Ambarus
Similar to spi_nor_match_name() extend the search of flash_info through all the manufacturers, this time doing the match by ID. There's no reason to limit the search per manufacturer yet, do it globally, search the flash in all the parts of all manufacturers in a single method. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-3-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: Rename method, s/spi_nor_match_id/spi_nor_match_nameTudor Ambarus
The method is matching a flash_info entry by searching by name. Rename the method for better clarity. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-2-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: core: Check written SR value in spi_nor_write_16bit_sr_and_check()Chen-Tsung Hsieh
Read back Status Register 1 to ensure that the written byte match the received value and return -EIO if read back test failed. Without this patch, spi_nor_write_16bit_sr_and_check() only check the second half of the 16bit. It causes errors like spi_nor_sr_unlock() return success incorrectly when spi_nor_write_16bit_sr_and_check() doesn't write SR successfully. Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()") Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220126073227.3401275-1-chentsung@chromium.org
2022-04-26io_uring: check reserved fields for recv/recvmsgJens Axboe
We should check unused fields for non-zero and -EINVAL if they are set, making it consistent with other opcodes. Fixes: aa1fa28fc73e ("io_uring: add support for recvmsg()") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-26io_uring: check reserved fields for send/sendmsgJens Axboe
We should check unused fields for non-zero and -EINVAL if they are set, making it consistent with other opcodes. Fixes: 0fa03c624d8f ("io_uring: add support for sendmsg()") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-26net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLKMartin Blumenstingl
Commit 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") added all known bits in the GSWIP_MII_CFGp register. It helped bring this register into a well-defined state so the driver has to rely less on the bootloader to do things right. Unfortunately it also sets the GSWIP_MII_CFG_RMII_CLK bit without any possibility to configure it. Upon further testing it turns out that all boards which are supported by the GSWIP driver in OpenWrt which use an RMII PHY have a dedicated oscillator on the board which provides the 50MHz RMII reference clock. Don't set the GSWIP_MII_CFG_RMII_CLK bit (but keep the code which always clears it) to fix support for the Fritz!Box 7362 SL in OpenWrt. This is a board with two Atheros AR8030 RMII PHYs. With the "RMII clock" bit set the MAC also generates the RMII reference clock whose signal then conflicts with the signal from the oscillator on the board. This results in a constant cycle of the PHY detecting link up/down (and as a result of that: the two ports using the AR8030 PHYs are not working). At the time of writing this patch there's no known board where the MAC (GSWIP) has to generate the RMII reference clock. If needed this can be implemented in future by providing a device-tree flag so the GSWIP_MII_CFG_RMII_CLK bit can be toggled per port. Fixes: 4b5923249b8fa4 ("net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits") Tested-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20220425152027.2220750-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26net: Use this_cpu_inc() to increment net->core_statsSebastian Andrzej Siewior
The macro dev_core_stats_##FIELD##_inc() disables preemption and invokes netdev_core_stats_alloc() to return a per-CPU pointer. netdev_core_stats_alloc() will allocate memory on its first invocation which breaks on PREEMPT_RT because it requires non-atomic context for memory allocation. This can be avoided by enabling preemption in netdev_core_stats_alloc() assuming the caller always disables preemption. It might be better to replace local_inc() with this_cpu_inc() now that dev_core_stats_##FIELD##_inc() gained a preempt-disable section and does not rely on already disabled preemption. This results in less instructions on x86-64: local_inc: | incl %gs:__preempt_count(%rip) # __preempt_count | movq 488(%rdi), %rax # _1->core_stats, _22 | testq %rax, %rax # _22 | je .L585 #, | add %gs:this_cpu_off(%rip), %rax # this_cpu_off, tcp_ptr__ | .L586: | testq %rax, %rax # _27 | je .L587 #, | incq (%rax) # _6->a.counter | .L587: | decl %gs:__preempt_count(%rip) # __preempt_count this_cpu_inc(), this patch: | movq 488(%rdi), %rax # _1->core_stats, _5 | testq %rax, %rax # _5 | je .L591 #, | .L585: | incq %gs:(%rax) # _18->rx_dropped Use unsigned long as type for the counter. Use this_cpu_inc() to increment the counter. Use a plain read of the counter. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/YmbO0pxgtKpCw4SY@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-26Merge tag 'pinctrl-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: - Fix some register offsets on Intel Alderlake - Fix the order the UFS and SDC pins on Qualcomm SM6350 - Fix a build error in Mediatek Moore. - Fix a pin function table in the Sunplus SP7021. - Fix some Kconfig and static keywords on the Samsung Tesla FSD SoC. - Fix up the EOI function for edge triggered IRQs and keep the block clock enabled for level IRQs in the STM32 driver. - Fix some bits and order in the Rockchip RK3308 driver. - Handle the errorpath in the Pistachio driver probe() properly. * tag 'pinctrl-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pistachio: fix use of irq_of_parse_and_map() pinctrl: stm32: Keep pinctrl block clock enabled when LEVEL IRQ requested pinctrl: rockchip: sort the rk3308_mux_recalced_data entries pinctrl: rockchip: fix RK3308 pinmux bits pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOI pinctrl: Fix an error in pin-function table of SP7021 pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos config pinctrl: mediatek: moore: Fix build error pinctrl: qcom: sm6350: fix order of UFS & SDC pins pinctrl: alderlake: Fix register offsets for ADL-N variant pinctrl: samsung: staticize fsd_pin_ctrl
2022-04-26Merge tag 'for-5.18/fbdev-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes and updates from Helge Deller: "A bunch of outstanding fbdev patches - all trivial and small" * tag 'for-5.18/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: clps711x-fb: Use syscon_regmap_lookup_by_phandle video: fbdev: mmp: replace usage of found with dedicated list iterator variable video: fbdev: sh_mobile_lcdcfb: Remove sh_mobile_lcdc_check_var() declaration video: fbdev: i740fb: Error out if 'pixclock' equals zero video: fbdev: i740fb: use memset_io() to clear screen video: fbdev: s3fb: Error out if 'pixclock' equals zero video: fbdev: arkfb: Error out if 'pixclock' equals zero video: fbdev: tridentfb: Error out if 'pixclock' equals zero video: fbdev: vt8623fb: Error out if 'pixclock' equals zero video: fbdev: kyro: Error out if 'lineclock' equals zero video: fbdev: neofb: Fix the check of 'var->pixclock' video: fbdev: imxfb: Fix missing of_node_put in imxfb_probe video: fbdev: omap: Make it CCF clk API compatible video: fbdev: aty/matrox/...: Prepare cleanup of powerpc's asm/prom.h video: fbdev: pm2fb: Fix a kernel-doc formatting issue linux/fb.h: Spelling s/palette/palette/ video: fbdev: sis: fix potential NULL dereference in sisfb_post_sis300() video: fbdev: pxafb: use if else instead video: fbdev: udlfb: properly check endpoint type video: fbdev: of: display_timing: Remove a redundant zeroing of memory
2022-04-26Merge tag 'gfs2-v5.18-rc4-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Andreas Gruenbacher: - Only re-check for direct I/O writes past the end of the file after re-acquiring the inode glock. * tag 'gfs2-v5.18-rc4-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Don't re-check for write past EOF unnecessarily
2022-04-26Bluetooth: hci_sync: Cleanup hci_conn if it cannot be abortedLuiz Augusto von Dentz
This attempts to cleanup the hci_conn if it cannot be aborted as otherwise it would likely result in having the controller and host stack out of sync with respect to connection handle. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-04-26Merge tag 'for-5.18-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - direct IO fixes: - restore passing file offset to correctly calculate checksums when repairing on read and bio split happens - use correct bio when sumitting IO on zoned filesystem - zoned mode fixes: - fix selection of device to correctly calculate device capabilities when allocating a new bio - use a dedicated lock for exclusion during relocation - fix leaked plug after failure syncing log - fix assertion during scrub and relocation * tag 'for-5.18-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: use dedicated lock for data relocation btrfs: fix assertion failure during scrub due to block group reallocation btrfs: fix direct I/O writes for split bios on zoned devices btrfs: fix direct I/O read repair for split bios btrfs: fix and document the zoned device choice in alloc_new_bio btrfs: fix leaked plug after failure syncing log on zoned filesystems
2022-04-26Bluetooth: hci_event: Fix creating hci_conn object on error statusLuiz Augusto von Dentz
It is useless to create a hci_conn object if on error status as the result would be it being freed in the process and anyway it is likely the result of controller and host stack being out of sync. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-09-22 16:50:39 +0000