summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-05i2c: i2c-mxs: Use DMA mode even for small transfersFabio Estevam
Recently we have been seing some reports about PIO mode not working properly. - http://www.spinics.net/lists/linux-i2c/msg11985.html - http://marc.info/?l=linux-i2c&m=137235593101385&w=2 - https://lkml.org/lkml/2013/6/24/430 Let's use DMA mode even for small transfers. Without this patch, i2c reads the incorrect sgtl5000 version on a mx28evk when touchscreen is enabled: [ 5.856270] sgtl5000 0-000a: Device with ID register 0 is not a sgtl5000 [ 9.877307] sgtl5000 0-000a: ASoC: failed to probe CODEC -19 [ 9.883528] mxs-sgtl5000 sound.12: ASoC: failed to instantiate card -19 [ 9.892955] mxs-sgtl5000 sound.12: snd_soc_register_card failed (-19) Cc: <stable@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Marek Vasut <marex@denx.de> [wsa: we have a proper solution for -next, so this non intrusive solution is OK for now] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-08-04skge: fix build on 32 bitStephen Hemminger
The following is needed as well to fix warning/error about shifting a 32 bit value 32 bits which occurs if building on 32 bit platform caused by conversion to using dma_addr_t Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05Merge tag 'iio-fixes-for-3.11b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second round of IIO fixes for the 3.11 cycle. 1) Fix a long term race in the IIO trigger handling. This only effects cases where a single trigger is in use by multiple devices. 2) ti_am335x fix an issue with incorrect data due to reading before the sequencer is finished.
2013-08-05MAINTAINERS: Add separate section for USB NETWORKING DRIVERSJoe Perches
There are several drivers in drivers/net/usb/ that do not have specific MAINTAINERS that should have emails forwarded to the linux-usb mailing list. Add a section for those drivers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Merge tag 'for-usb-linus-2013-07-31' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus Sarah writes: xhci: Misc bug fixes for 3.11. Hi Greg, Here's two small fixes for 3.11. The first patch fixes a 5 second hang in khubd after a USB device disconnect on some xHCI hosts. The second fixes a build warning. Sarah Sharp
2013-08-04busy_poll: cleanup do-nothing placeholdersEliezer Tamir
When renaming ll_poll to busy poll, I introduced a typo in the name of the do-nothing placeholder for sk_busy_loop and called it sk_busy_poll. This broke compile when busy poll was not configured. Cong Wang submitted a patch to fixed that. This patch removes the now redundant, misspelled placeholder. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-04skge: add dma_mapping checkstephen hemminger
This old driver never checked for DMA mapping errors. Causing splats with the new DMA mapping checks: WARNING: at lib/dma-debug.c:937 check_unmap+0x47b/0x930() skge 0000:01:09.0: DMA-API: device driver failed to check map Add checks and unwind code. Reported-by: poma <pomidorabelisima@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-04ACPI / video: improve quirk check in acpi_video_bqc_quirk()Felipe Contreras
If the _BCL package ordering is descending, the first level (br->levels[2]) is likely to be 0, and if the number of levels matches the number of steps, we might confuse a returned level to mean the index. For example: current_level = max_level = 100 test_level = 0 returned level = 100 In this case 100 means the level, not the index, and _BCM failed. Still, if the _BCL package ordering is descending, the index of level 0 is also 100, so we assume _BQC is indexed, when it's not. This causes all _BQC calls to return bogus values causing weird behavior from the user's perspective. For example: xbacklight -set 10; xbacklight -set 20; would flash to 90% and then slowly down to the desired level (20). The solution is simple; test anything other than the first level (e.g. 1). [rjw: Changelog] Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-08-04ARM: tegra: enable ULPI phy on Colibri T20Lucas Stach
This was missed when splitting out the phy from the controller node in commit 9dffe3be3f32 (ARM: tegra: modify ULPI reset GPIO properties). Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04Linux 3.11-rc4v3.11-rc4Linus Torvalds
2013-08-04ARM: STi: remove sti_secondary_start from INIT section.Srinivas Kandagatla
This patch removes sti_secondary_start from _INIT section, there are 2 reason for this removal. 1. discarding such a small code does not save much, given the RAM sizes. 2. Having this code discarded, creates corruption issue when we boot smp-kernel with nrcpus=1 or with single cpu node in DT. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04ARM: STi: Fix cpu nodes with correct device_type.Srinivas Kandagatla
This patch fixes cpu nodes with device_type = "cpu". This change was not necessary before 3.10-rc7. Without this patch STi SOCs does not boot as SMP. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04Merge tag 'renesas-fixes2-for-v3.11' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman: Second round of Renesas ARM based SoC fixes for v3.11 * Lager board: do not annotate gpio_buttons as __initdata - This avoids accessing uninitialised memory if keys are pressed after kernel initialisation completes. - Bug introduced in gpio-keys were enabled in v3.11-rc1 * Bock-W board: fix SDHI0 PFC settings - Allow detection of SD card - Bug introduced in SDHI support was added in v3.11-rc1 * shdma: fixup sh_dmae_get_partial() calculation error - Bug introduced in 2.6.34-rc1. * armadillo800eva board: Don't request GPIO 166 in board code - Allow use of touchscreen - Bug introduced in v3.11-rc1 * tag 'renesas-fixes2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: lager: do not annotate gpio_buttons as __initdata ARM: shmobile: BOCK-W: fix SDHI0 PFC settings shdma: fixup sh_dmae_get_partial() calculation error ARM: shmobile: armadillo800eva: Don't request GPIO 166 in board code Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04Merge tag 'for-v3.11-rc/omap-fixes-b' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into fixes From Paul Walmsley via Tony Lindgren: Some OMAP hwmod fixes for v3.11-rc. Mostly intended to fix an earlyprintk regression and an AM33xx cpgmac power management regression. Basic build, boot, and PM tests are available here: http://www.pwsan.com/omap/testlogs/hwmod_fixes_a_v3.11-rc/20130730042132/ The tests include temporary fixes for the unrelated 2430SDP and OMAP3 boot regressions, which are not part of this signed tag. * tag 'for-v3.11-rc/omap-fixes-b' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending: ARM: OMAP2+: hwmod: AM335x: fix cpgmac address space ARM: OMAP2+: hwmod: rt address space index for DT ARM: OMAP2+: Sync hwmod state with the pm_runtime and omap_device state ARM: OMAP2+: Avoid idling memory controllers with no drivers ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04Merge tag 'omap-for-v3.11/fixes-omap5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Fixes for omap5-uevm regulators from Nishanth Menon <nm@ti.com>: Due to wrong older revision of documentation used as reference, we seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This series is based power tree on production board 750-2628-XXX platform. Unfortunately, the wrong voltages may be detrimental to OMAP5 as they supply hardware blocks at voltages that are out of specification. There is a chance that without these fixes there can be hardware damage to omap5-uevm boards with the v3.11-rc series. * tag 'omap-for-v3.11/fixes-omap5' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5-uevm: update optional/unused regulator configurations ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC ARM: dts: omap5-uevm: document regulator signals used on the actual board Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04Merge tag 'msm-3.11-fix1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into fixes From David Brown, fixes for MSM for 3.11: Two small fixes for MSM. The first fixes the a gpio controller register address. I didn't see any acks from the devicetree maintainers, so I've copied them on this pull request. The change itself is minor, and just to the register address. The second change removes the gpiomux V1 code from MSM. This was breaking compilation for some of the targets. * tag 'msm-3.11-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Consolidate gpiomux for older architectures ARM: msm: dts: Fix the gpio register address for msm8960 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-04drm/i915: Remove useless defineStéphane Marchesin
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915: Use the same pte_encoding for ppgtt as for gttChris Wilson
The PTE layouts are the same for both ppgtt and gtt, so we can simplify the setup for ppgtt by copying the encoding function pointer from gtt. This prevents bugs where we update one function pointer, but forget the other. For instance, commit 4d15c145a6234d999c0452eec0d275c1fbf0688c Author: Ben Widawsky <ben@bwidawsk.net> Date: Thu Jul 4 11:02:06 2013 -0700 drm/i915: Use eLLC/LLC by default when available only extends the gtt to use eLLC/LLC cacheing and forgets to also update the ppgtt function pointer. v2: Actually mention the bug being fixed (Kenneth) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915: Squelch repeated reasoning for why FBC cannot be activatedChris Wilson
Almost invariably the reason why FBC cannot be turned on is the same every time (disabled via parameter, too many pipes, pipe too large etc) as modesetting and framebuffer configuration changes less frequently than trying to enable FBC. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915: clean up crtc timings computationDaniel Vetter
In the old days of the crtc helpers we've only had the encoder and crtc ->mode_fixup callbacks. So when the lvds connector wanted to adjust the crtc timings it had to set a driver-private mode flag to tell the crtc mode fixup code to not overwrite them with the generic ones. When converting things to the new infrastructure I've kept the entire logic and only moved the flag to pipe_config->timings_set. But this logic is pretty tricky and already caused regressions: commit 21d8a4756af5fdf4a42e79a77cf3b6f52678d443 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jul 12 08:07:30 2013 +0200 drm/i915: fix pfit regression for non-autoscaled resolutions So take advantage of the flexibility our own modeset infrastructure affords us and prefill default crtc timings. This allows us to rip out ->timings_set. Note that we overwrite things again when retrying the pipe config computation due to bandwidth constraints to avoid bogus crtc timings if the encoder only does relative adjustments (which is how the pfit code works). Only a theoretical concern though since platforms where we retry (pch-split platforms) do not need adjustements (since only the old gmch pfit needs that). But let's better be safe than sorry. Since we now initialize the crtc timings before calling the encoder->compute_config functions the crtc initialization in the gmch pfit code is now redudant and so can be removed. Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Add a paragraph to the commit message to explain why we can ditch the crtc timings initialization call from the gmch pfit code, to answer a question from Rodrigo's review.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915: rip out legacy encoder->mode_set callbackDaniel Vetter
The encoder->mode_set callback from the crtc helpers is now completely unused in our driver. Good riddance! Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/ddi: use the native encoder ->mode_set callbackDaniel Vetter
Same conversion as for hdmi/dp. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/lvds: use the native encoder ->mode_set callbackDaniel Vetter
Does nothing, so trivial conversion. But update the outdated comment while at it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/dp: use native encoder ->mode_set callbackDaniel Vetter
Usual drill applies. Again I've not switched the upcast helpers to use intel_encoder instead of drm_encoder since that's much more invasive and will change also the hdmi and ddi encoders. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/hdmi: use native encoder mode_set callbackDaniel Vetter
Again drop the intel_ prefix from the intel_crtc local variable to save a bit of space. But here I didn't switch the upcast macros to intel_encoder since all our infoframe interfaces still use drm_encoder. That needs to be changed first. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/crt: use native encoder->mode_set callbackDaniel Vetter
Also drop the intel_ prefix from the local intel_crtc variable and reorder the upcast macros a bit for more reuse. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/tv: Use native encoder->mode_set callbackDaniel Vetter
Also switch to intel_encoder for the upcast helper while at it. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/sdvo: use intel_encoder for upcast helperDaniel Vetter
It's what all callers (except for the destroy callback which is called from drm core) actually want. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/dvo: use native encoder ->mode_set callbackDaniel Vetter
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915: rip out legacy encoder->mode_fixup logicDaniel Vetter
Everyone is now using our own ->compute_config callback, which means we can now also make that callback mandatory. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/dvo: switch ->mode_fixup to ->compute_configDaniel Vetter
This is the last encoder ->mode_fixup callback we have left, so convert it. Note that we want to only rip out the encoder->mode_fixup callback. But we still have the dvo_slave->mode_fixup callback. dvo is gen2 only, so we won't ever touch this again. Hence why I didn't go through all 6-7 dvo slave drivers and give them the same treatment. I'll add a note to the commit message about this when merging, presuming there's nothing else in the patch that needs to be fixed up. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> [danvet: Add note about why we keep the dvo->mode_fixup callback to answer a question from Rodrigo's review.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915/dvo: use intel_encoder to the upcast macroDaniel Vetter
More natural and will soon be even better! Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04drm/i915: Do not dereference NULL crtc or fb until after checkingChris Wilson
Fixes regression from commit 4906557eb37b7fef84fad4304acef6dedf919880 Author: Rodrigo Vivi <rodrigo.vivi@gmail.com> Date: Thu Jul 11 18:45:05 2013 -0300 drm/i915: Hook PSR functionality Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67526 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-04Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Two fixes for slave dmaengine. The first fixes cyclic dma transfers for pl330 and the second one makes us return the correct error code on probe" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: pl330: Fix cyclic transfers pch_dma: fix error return code in pch_dma_probe()
2013-08-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fix from Dave Airlie: "Just a quick fix that a few people have reported, be nice to have in asap" The drm tree seems to be very confused about 64-bit divides. Here it uses a slow 64-by-64 bit divide to divide by a small constant. Oh well. Doesn't look performance-critical, just stupid. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix 64 bit divide in SI spm code
2013-08-04tmpfs: fix SEEK_DATA/SEEK_HOLE regressionHugh Dickins
Commit 46a1c2c7ae53 ("vfs: export lseek_execute() to modules") broke the tmpfs SEEK_DATA/SEEK_HOLE implementation, because vfs_setpos() converts the carefully prepared -ENXIO to -EINVAL. Other filesystems avoid it in error cases: do the same in tmpfs. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-04Merge tag 'sound-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All small regression or small fixes, nothing surprising at this stage. - regression fix for intel Mac Mini quirk - compress ioctl error fix - ASoC fixes for control change notifications, some UI fixes, driver-specific fixes (resource leak, build errors, etc)" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing fixup for Mac Mini with STAC9221 ASoC: wm0010: Fix resource leak ASoC: au1x: Fix build ASoC: bf5xx-ac97: Fix compile error with SND_BF5XX_HAVE_COLD_RESET ASoC: bfin-ac97: Fix prototype error following AC'97 refactoring ALSA: compress: fix the return value for SNDRV_COMPRESS_VERSION ASoC: dapm: Fix return value of snd_soc_dapm_put_{volsw,enum_virt}()
2013-08-04drm/radeon: fix 64 bit divide in SI spm codeAlex Deucher
Forgot to use the appropriate math64 function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ...
2013-08-03qlcnic: Fix for flash update failure on 83xx adapterHimanshu Madhani
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed and duplex display for 83xx adapterRajesh Borundia
o Set link speed and duplex to unknown when link is not up. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed display for 82xx adapterRajesh Borundia
o Do not obtain link speed from register when adapter link is down. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix external loopback test.Shahed Shaikh
Driver was not handling external loopback diagnostic test request. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Removed adapter series name from warning messages.Pratik Pujar
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Free up memory in error path.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix ingress MAC learningShahed Shaikh
o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix MAC address filter issue on 82xx adapterShahed Shaikh
Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03net: ethernet: davinci_emac: drop IRQF_DISABLEDMugunthan V N
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfixes from Bruce Fields: "Most of this is due to a screwup on my part -- some gss-proxy crashes got fixed before the merge window but somehow never made it out of a temporary git repo on my laptop...." * 'for-3.11' of git://linux-nfs.org/~bfields/linux: svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall svcrpc: fix kfree oops in gss-proxy code svcrpc: fix gss-proxy xdr decoding oops svcrpc: fix gss_rpc_upcall create error NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure.
2013-08-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix chip initialization/configuration in MAX6697 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max6697) fix MAX6581 ideality
generated by cgit (git 2.34.1) at 2025-09-16 12:54:59 +0000