summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-09drm/gma500: fix things after get/put page helpersRob Clark
Commit 8b9ba7a3 'drm/gma500: use gem get/put page helpers' was missing a line, which resulted in garbled screen. Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Guillaume CLÉMENT <gclement@baobob.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-10-09ARM: dts: imx51-babbage: Make DVI and WVGA panel functionalFabio Estevam
Currently we get the following errors on imx51-babbage: /display@di0: could not find display-timings node /display@di0: no timings specified /display@di1: could not find display-timings node /display@di1: no timings specified imx-drm imx-drm: failed to allocate buffer with size 0 Provide timing values for IPU1, which is connected to a DVI bridge and to IPU2, which can be connected to the WVGA panel, so that both of them can be functional. While at it, disable the WVGA panel, so that DVI output becomes the default one. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-08ARM: tegra: add Venice2 board supportJoseph Lo
Add support for the Tegra124 based Venice2 reference board. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-08ARM: tegra: Add initial device tree for Tegra124Joseph Lo
Initial support for Tegra 124 SoC. This is expected to be included in the board DTS files. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-08ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_configPali Rohár
File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs attribute if value is higher than max_current specified in board file. By default global C variables are zero, so changing always failed. This patch adding missing max_current and setting it to max safe value 100 (10 mA). It is unclear which commit exactly caused this regression as the lp5523 driver was broken and was hiding the platform data breakage. Now the driver is fixed so this should be fixed as well. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Joerg Reisenweber <joerg@openmoko.org> [tony@atomide.com: updated comments to describe regression] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ALSA: hda - Add fixup for ASUS N56VZTakashi Iwai
ASUS N56VZ needs a fixup for the bass speaker pin, which was already provided via model=asus-mode4. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=841645 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-08ARM: mach-omap2: board-generic: fix undefined symbolSimon Barth
Since dra7 reuses the function 'omap5_realtime_timer_init' in arch/arm/mach-omap2/board-generic.c as timer init function, it has to be built for this SoC as well. Signed-off-by: Simon Barth <Simon.Pe.Barth@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: dts: Fix pinctrl mask for omap3Tony Lindgren
The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Benoît Cousson <bcousson@baylibre.com> Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08ARM: OMAP3: Fix hardware detection for omap3630 when booted with device treeNishanth Menon
SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-08Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Various fixlets: On the kernel side: - fix a race - fix a bug in the handling of the perf ring-buffer data page On the tooling side: - fix the handling of certain corrupted perf.data files - fix a bug in 'perf probe' - fix a bug in 'perf record + perf sched' - fix a bug in 'make install' - fix a bug in libaudit feature-detection on certain distros" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf session: Fix infinite loop on invalid perf.data file perf tools: Fix installation of libexec components perf probe: Fix to find line information for probe list perf tools: Fix libaudit test perf stat: Set child_pid after perf_evlist__prepare_workload() perf tools: Add default handler for mmap2 events perf/x86: Clean up cap_user_time* setting perf: Fix perf_pmu_migrate_context
2013-10-08ARM: dts: OMAP5: add palmas-usb nodeFelipe Balbi
Without this node, there will be no palmas driver to notify dwc3 that a cable has been connected and, without that, dwc3 will never initialize. Signed-off-by: Felipe Balbi <balbi@ti.com> [kishon@ti.com: added dt properties for enabling vbus/id interrupts and fixed vbus-supply value after SMPS10 is modeled as 2 regulators] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap3-beagle: Make USB host pin naming consistentRoger Quadros
Use a common naming scheme "mode0name.modename flags" for the USB host pins to be consistent. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Add devicetree for gta04 board.Marek Belisko
This adds devicetree for gta04 (Openmoko next generation board) with necessary support for mmc, usb, leds and button. Signed-off-by: Marek Belisko <marek@goldelico.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: AM4372: add few nodesAfzal Mohammed
Populate uarts, timers, rtc, wdt, gpio, i2c, spi, cpsw & pwm nodes. Reason for adding these nodes early - hwmod code required address space of peripherals corresponding to these nodes (as address space details are removed from hwmod database). uart0, timers - 1 & 2 and synctimer were already present, so here the remaining uarts & timers are added. All properties as per the existing binding has been added for uart, timer, rtc, wdt & gpio. Even though that was not the current scope of work, felt adding those would reduce or require no effort later to get these peripherals working. For i2c, spi, cpsw & pwm - only the properties that were sure to be correct has been added (main intention is to make hwmod happy and avoid any later modification to here added properties). While at it add "ti,hwmod" property to already existing nodes. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: AM4372: cpu(s) node per latest bindingAfzal Mohammed
Update AM4372 cpu node to the latest cpus/cpu bindings for ARM. Signed-off-by: Afzal Mohammed <afzal@ti.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm boardR Sricharan
Add minimal device tree source needed for DRA7 based SoCs. Also add a board dts file for the dra7-evm (based on dra752) which contains 1.5G of memory with 1G interleaved and 512MB non-interleaved. Also added in the board file are pin configuration details for i2c, mcspi and uart devices on board. Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate ↵Ruslan Bilovol
dtsi file The OMAP4 SoC family uses specially-designed PMIC (power management IC) companion chip for power management needs: TWL6030/TWL6032. Therefore there is a typical connection of PMIC to OMAP4 so we can move it into separate .dtsi file and do not duplicate over board-specific files. Tested on OMAP4 SDP board and Pandaboard ES2. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP5 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP4 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP3430 SDP DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP3 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP3 IGEP0030 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP3 IGEP0020 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: Remove '0x's from OMAP2420 H4 DTS fileLee Jones
Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap5-uevm: Split SMPS10 in two nodesKishon Vijay Abraham I
SMPS10 has two outputs OUT1 and OUT2. Hence SMPS10 is modeled as two regulators. The DT node is split to reflect it. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: AM33xx: Correct gpio #interrupt-cells propertyLars Poeschel
Following commit ff5c9059 and therefore other omap platforms using the gpio-omap driver correct the #interrupt-cells property on am33xx too. The omap gpio binding documentaion also states that the #interrupt-cells property should be 2. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: AM33XX: Add PMU supportAlexandre Belloni
ARM Performance Monitor Units are available on the am33xx, add the support in the dtsi. Tested with perf and oprofile on a regular beaglebone. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap3-igep0030: add mux conf for GPIO LEDJavier Martinez Canillas
The IGEP COM MOdule has a GPIO LED connected to OMAP pins. Configure this pin as output GPIO. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap3-igep0020: add mux conf for GPIO LEDsJavier Martinez Canillas
The IGEPv2 has a number of GPIO LED connected to OMAP pins. Configure these pins as output GPIO. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: omap3-igep: add pinmux node for GPIO LED configurationJavier Martinez Canillas
IGEP boards have a number of LED connected to OMAP or TWL GPIO lines. The actual wiring is different on each board so each board DT has need to configure the mux correctly. Even though it works with the current DT, the kernel complains with: [2.305023] leds-gpio leds.18: pins are not configured from the driver Add an empty pinmux_leds_pins pinctrl child node so boards can override with the correct mux configuration and not depend on default values for the GPIO LEDs to work. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: dts: N900: Add device treePavel Machek
This adds device tree with necessary support to boot with functional video (on both emulator and real N900 device). Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2013-10-08ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruckOliver Schinagl
Cubietech introduced a new cubieboard, the CubieTruck. This board added more output connectors and features 2 GiB of RAM and a Gigabit PHY. Tested are are uart0 and LEDS which both work as expected. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-10-08ALSA: hda - hdmi: Fix channel map switch not taking effectAnssi Hannula
Currently hdmi_setup_audio_infoframe() reprograms the HDA channel mapping only when the infoframe is not up-to-date or the non-PCM flag has changed. However, when just the channel map has been changed, the infoframe may still be up-to-date and non-PCM flag may not have changed, so the new channel map is not actually programmed into the HDA codec. Notably, this failing case is also always triggered when the device is already in a prepared state and a new channel map is configured while changing only the channel positions (for example, plain "speaker-test -c2 -m FR,FL"). Fix that by always programming the channel map in hdmi_setup_audio_infoframe(). Tested on Intel HDMI. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-08ARM: imx27-apf27dev: Add framebuffer supportGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-08ARM: imx51-apf51dev: Add parallel display supportGwenhael Goavec-Merou
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-10-08drm/nouveau/mc: disable msi support by default, it's busted in tons of placesBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2013-10-08Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * The libaudit test was failing in some systems due to a unescaped newline, fix it so that the 'trace' tool can be built in such systems. * Fix installation of libexec components. * Add default handler for mmap2 events so that tools that don't explicitely define an MMAP2 handler don't crash, fix from David Ahern. * Fix to find line information for probe list, from Masami Hiramatsu. * Set child_pid after perf_evlist__prepare_workload(), fix from Namhyung Kim. * Fix infinite loop on invalid perf.data file, from Namhyung Kim. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-08ARM: shmobile: bockw: fixup ether node namingKuninori Morimoto
According to the ePAPR spec, the node name should be "ethernet", not "lan0". Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7779: add irqpin default status on DTSIKuninori Morimoto
r8a7779 INTC needs IRL pin mode settings to determine behavior of IRQ0 - IRQ3. But it depends on platform. This patch adds status = "disabled" on r8a7779.dtsi as default Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: marzen: fixup SMSC IRQ number on DTSKuninori Morimoto
This patch fixup miss-setting of SMSC IRQ number. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: bockw: add SMSC support on DTSKuninori Morimoto
This patch enables INTC IRQ and SMSC on BockW board via DT. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7778: add renesas_intc_irqpin support on DTSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 SMP device tree nodeMagnus Damm
Add a device node for the r8a7791 secondary CPU core. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 Arch timer device tree nodeMagnus Damm
Add r8a7791 arch timer device tree information. This needs to be used together with r8a7791 support code that ties in the R-Car Gen2 arch timer workarounds. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7791 IRQC device tree nodeMagnus Damm
Enable a r8a7791 IRQC block by adding a device tree node for the IRQC hardware and pins IRQ0 to IRQ9. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfacesGuennadi Liakhovetski
Add SDHI0 and MMCIF interfaces to armadillo800eva-reference with regulators and pin configurations. SDHI1 is not added yet, because the switch, that connects the interface either to an SD slot or to a WiFi SDIO card cannot be described in DT yet. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: armadillo-reference: Add PWM backlight node to DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a73a4: add a DT node for the DMACGuennadi Liakhovetski
Add a DT node for the only system DMAC instance on r8a73a4. The RT DMAC can be added later under the same multiplexer, because they can serve the same slaves and use the same MID-RID values. Configuration data is supplied to the driver, using a compatibility match string. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: r8a7790: add I2C DT nodesGuennadi Liakhovetski
Add DT nodes for the four I2C interfacces on r8a7790. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boardsGuennadi Liakhovetski
Currently all I2C interfaces in all *.dtsi files for various Renesas SoCs are enabled by default. Switch them all off and only enable populated I2C interfaces in board-specific *.dts files. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-09-11 19:35:41 +0000