| Age | Commit message (Collapse) | Author |
|---|
|
If CONFIG_OF is disabled and the ahci_st driver is builtin (or
CONFIG_MODULES is disabled), then using the macro of_match_ptr()
results in the st_ahci_match variable being unused, which generates a
compilation warning and a compilation error if CONFIG_WERROR is enabled.
Fix this by directly assigning st_ahci_match to .of_match_table in the
st_ahci_driver platform driver definition.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
I2S1 pins are exposed on 40-pin header on Radxa ROCK Pi 4 series.
their default function is GPIO, so I2S1 need to be disabled.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20220924112812.1219-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
For "Quartz64 Model A" add missing RTS line to the UART interface used by
bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
match the boards physical layout. This changes are necessary to make
bluetooth provided by the wireless module work.
Also set max-speed on the bluetooth device as it's not automatically
detected.
Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A")
Signed-off-by: Lev Popov <leo@nabam.net>
Link: https://lore.kernel.org/r/20220926125350.64783-1-leo@nabam.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Internal pull-down for strobe line (GRF_EMMCPHY_CON2[9]) was disabled
by commit 8b5c2b45b8f0, which causes I/O error in HS400 mode.
Tested on NanoPC-T4.
Fixes: 8b5c2b45b8f0 ("phy: rockchip: set pulldown for strobe line in dts")
Signed-off-by: Jensen Huang <jensenhuang@friendlyarm.com>
Link: https://lore.kernel.org/r/20220928091129.20597-1-jensenhuang@friendlyarm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
At the moment Capture source selector appears on Playback
tab in the alsamixer and has a senseless name.
Let's fix that.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-5-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Line In Bypass control is used as Master Capture at the moment
this is completely incorrect.
Current control routed to Mixer instead of ADC, thus can't affect
Capture path. ADC control shall be used instead.
ADC volume control parameters are different, so the patch fixes that
as well. Manual says (16.6.3.2 Programmable input attenuation amplifier:
PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-4-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
DAC volume control is the Master Playback Volume at the moment
and it reports wrong levels in alsamixer and other alsa apps.
The patch fixes that, as stated in manual on the jz4725b SoC
(16.6.3.4 Programmable attenuation: GOD) the ctl range varies
from -22.5dB to 0dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-3-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Line In path stayed powered off during capturing or
bypass to mixer.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-2-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
i2c5 is owned by hdmi port
Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-4-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add MIPS to fb_* helpers list for iomem addresses. This silences Sparse
warnings about lacking __iomem address space casts:
drivers/video/fbdev/pvr2fb.c:800:9: sparse: sparse: incorrect type in argument 1 (different address spaces)
drivers/video/fbdev/pvr2fb.c:800:9: sparse: expected void const *
drivers/video/fbdev/pvr2fb.c:800:9: sparse: got char [noderef] __iomem *screen_base
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202210100209.tR2Iqbqk-lkp@intel.com/
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
As per device schematic i2c3 pinctrl is connected to m0 instead of m1
Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-3-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Lan does not work on rgmii-id, most rk356x devices lan
is being switched to rgmii.
Signed-off-by: Furkan Kardame <f.kardame@manjaro.org>
Link: https://lore.kernel.org/r/20221010190142.18340-2-f.kardame@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This is repeated a few lines down.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20221013213336.1779917-1-briannorris@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Most of the device with QUP SPI adapter are actually using GPIO-s for
chip select.
However, this stopped working after ("spi: Retire legacy GPIO handling")
as it introduced a check on ->use_gpio_descriptors flag and since spi-qup
driver does not set the flag it meant that all of boards using GPIO-s and
with QUP adapter SPI devices stopped working.
So, to enable using GPIO-s again set ->use_gpio_descriptors to true and
populate ->max_native_cs.
Fixes: f48dc6b96649 ("spi: Retire legacy GPIO handling")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: luka.perkov@sartura.hr
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20221006194819.1536932-1-robert.marko@sartura.hr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 23904f7b2518 ("ALSA: hda: cs35l41: Remove
suspend/resume hda hooks"), the return of comp_bind()
can be simplified. No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221014013640.1142107-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Back in the description of commit e440e30e26dd ("arm64: dts: qcom:
sc7180: Avoid glitching SPI CS at bootup on trogdor") we described a
problem that we were seeing on trogdor devices. I'll re-summarize here
but you can also re-read the original commit.
On trogdor devices, the BIOS is setting up the SPI chip select as:
- mux special function (SPI chip select)
- output enable
- output low (unused because we've muxed as special function)
In the kernel, however, we've moved away from using the chip select
line as special function. Since the kernel wants to fully control the
chip select it's far more efficient to treat the line as a GPIO rather
than sending packet-like commands to the GENI firmware every time we
want the line to toggle.
When we transition from how the BIOS had the pin configured to how the
kernel has the pin configured we end up glitching the line. That's
because we _first_ change the mux of the line and then later set its
output. This glitch is bad and can confuse the device on the other end
of the line.
The old commit e440e30e26dd ("arm64: dts: qcom: sc7180: Avoid
glitching SPI CS at bootup on trogdor") fixed the glitch, though the
solution was far from elegant. It essentially did the thing that
everyone always hates: encoding a sequential program in device tree,
even if it's a simple one. It also, unfortunately, got broken by
commit b991f8c3622c ("pinctrl: core: Handling pinmux and pinconf
separately"). After that commit we did all the muxing _first_ even
though the config (set the pin to output high) was listed first. :(
I looked at ideas for how to solve this more properly. My first
thought was to use the "init" pinctrl state. In theory the "init"
pinctrl state is supposed to be exactly for achieving glitch-free
transitions. My dream would have been for the "init" pinctrl to do
nothing at all. That would let us delay the automatic pin muxing until
the driver could set things up and call pinctrl_init_done(). In other
words, my dream was:
/* Request the GPIO; init it 1 (because DT says GPIO_ACTIVE_LOW) */
devm_gpiod_get_index(dev, "cs", GPIOD_OUT_LOW);
/* Output should be right, so we can remux, yay! */
pinctrl_init_done(dev);
Unfortunately, it didn't work out. The primary reason is that the MSM
GPIO driver implements gpio_request_enable(). As documented in
pinmux.h, that function automatically remuxes a line as a GPIO. ...and
it does this remuxing _before_ specifying the output of the pin. You
can see in gpiod_get_index() that we call gpiod_request() before
gpiod_configure_flags(). gpiod_request() isn't passed any flags so it
has no idea what the eventual output will be.
We could have debates about whether or not the automatic remuxing to
GPIO for the MSM pinctrl was a good idea or not, but at this point I
think there is a plethora of code that's relying on it and I certainly
wouldn't suggest changing it.
Alternatively, we could try to come up with a way to pass the initial
output state to gpio_request_enable() and plumb all that through. That
seems like it would be doable, but we'd have to plumb it through
several layers in the stack.
This patch implements yet another alternative. Here, we specifically
avoid glitching the first time a pin is muxed to GPIO function if the
direction of the pin is output. The idea is that we can read the state
of the pin before we set the mux and make sure that the re-mux won't
change the state.
NOTES:
- We only do this the first time since later swaps between mux states
might want to preserve the old output value. In other words, I
wouldn't want to break a driver that did:
gpiod_set_value(g, 1);
pinctrl_select_state(pinctrl, special_state);
pinctrl_select_default_state();
/* We should be driving 1 even if "special_state" made the pin 0 */
- It's safe to do this the first time since the driver _couldn't_ have
explicitly set a state. In order to even be able to control the GPIO
(at least using gpiod) we have to have requested it which would have
counted as the first mux.
- In theory, instead of keeping track of the first time a pin was set
as a GPIO we could enable the glitch-free behavior only when
msm_pinmux_request_gpio() is in the callchain. That works an enables
my "dream" implementation above where we use an "init" state to
solve this. However, it's nice not to have to do this. By handling
just the first transition to GPIO we can simply let the normal
"default" remuxing happen and we can be assured that there won't be
a glitch.
Before this change I could see the glitch reported on the EC console
when booting. It would say this when booting the kernel:
Unexpected state 1 in CSNRE ISR
After this change there is no error reported.
Note that I haven't reproduced the original problem described in
e440e30e26dd ("arm64: dts: qcom: sc7180: Avoid glitching SPI CS at
bootup on trogdor") but I could believe it might happen in certain
timing conditions.
Fixes: b991f8c3622c ("pinctrl: core: Handling pinmux and pinconf separately")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20221014103217.1.I656bb2c976ed626e5d37294eb252c1cf3be769dc@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
SDIO tuple is only allocated for standard SDIO card, especially it causes
memory corruption issues when the non-standard SDIO card has removed, which
is because the card device's reference counter does not increase for it at
sdio_init_func(), but all SDIO card device reference counter gets decreased
at sdio_release_func().
Fixes: 6f51be3d37df ("sdio: allow non-standard SDIO cards")
Signed-off-by: Matthew Ma <mahongwei@zeku.com>
Reviewed-by: Weizhao Ouyang <ouyangweizhao@zeku.com>
Reviewed-by: John Wang <wangdayu@zeku.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221014034951.2300386-1-ouyangweizhao@zeku.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Enhanced Strobe (ES) does not work correctly on the ASUS 1100 series of
devices. Jasper Lake eMMCs (pci_id 8086:4dc4) are supposed to support
ES. There are also two system families under the series, thus this is
being scoped to the ASUS BIOS.
The failing ES prevents the installer from writing to disk. Falling back
to HS400 without ES fixes the issue.
Signed-off-by: Patrick Thompson <ptf@google.com>
Fixes: 315e3bd7ac19 ("mmc: sdhci-pci: Add support for Intel JSL")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221013210017.3751025-1-ptf@google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The core issues the warning "drop HS400 support since no 8-bit bus" when
one of the ESDHC_FLAG_HS400* flags is set on a non 8bit capable host. To
avoid this warning set these flags only on hosts that actually can do
8bit, i.e. have bus-width = <8> set in the device tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Fixes: 029e2476f9e6 ("mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXP")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221013093248.2220802-1-s.hauer@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
To prevent any recovery work running after the queue cleanup cancel it.
Any recovery running post-cleanup dereferenced mq->card as NULL
and was not meaningful to begin with.
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/c865c0c9789d428494b67b820a78923e@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Before switching back to the right partition in mmc_blk_reset there used
to be a check if hw_reset was even supported. This return value
was removed, so there is no reason to check. Furthermore ensure
part_curr is not falsely set to a valid value on reset or
partition switch error.
As part of this change the code paths of mmc_blk_reset calls were checked
to ensure no commands are issued after a failed mmc_blk_reset directly
without going through the block layer.
Fixes: fefdd3c91e0a ("mmc: core: Drop superfluous validations in mmc_hw|sw_reset()")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/e91be6199d04414a91e20611c81bfe1d@hyperstone.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Fixes UART1 function bits and MMC groups typo.
For pins 0x97,0x99 function 0 is designated to PWM3/PWM5
respectively, function is 1 designated to the UART1.
Diff from v1:
- sent separately
- added tag Fixes
Cc: stable@vger.kernel.org
Fixes: b582b5a434d3 ("pinctrl: Ingenic: Add pinctrl driver for JZ4755.")
Tested-by: Siarhei Volkau <lis8215@gmail.com>
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016153548.3024209-1-lis8215@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The function mtk_foe_entry_usable() is defined in the mtk_ppe.c file, but
not called elsewhere, so delete this unused function.
drivers/net/ethernet/mediatek/mtk_ppe.c:400:20: warning: unused function 'mtk_foe_entry_usable'.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2409
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Yang Yingliang says:
====================
net: ethernet: mtk_eth_wed: fixe some leaks
I found some leaks in mtk_eth_soc.c/mtk_wed.c.
patch#1 - I found mtk_wed_exit() is never called, I think mtk_wed_exit() need
be called in error path or module remove function to free the memory
allocated in mtk_wed_add_hw().
patch#2 - The device is not put in error path in mtk_wed_add_hw().
patch#3 - The device_node pointer returned by of_parse_phandle() with refcount
incremented, it should be decreased when it done.
This patchset was just compiled tested because I don't have any HW on
which to do the actual tests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The device_node pointer returned by of_parse_phandle() with refcount
incremented, when finish using it, the refcount need be decreased.
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After calling get_device() in mtk_wed_add_hw(), in error path, put_device()
needs be called.
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If mtk_wed_add_hw() has been called, mtk_wed_exit() needs be called
in error path or removing module to free the memory allocated in
mtk_wed_add_hw().
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The iio_triggered_buffer_setup_ext() was changed by
commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().
The added attribute "wrapping" does not copy the pointer to stored
string constant and when the sysfs file is read the kernel will access
to invalid location.
Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order
to prevent the invalid memory access.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
Link: https://lore.kernel.org/r/cf8a56658fc38db8bed64f456d898f5ad5a2814f.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The devm_iio_kfifo_buffer_setup_ext() was changed by
commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().
The added attribute "wrapping" does not copy the pointer to stored
string constant and when the sysfs file is read the kernel will access
to invalid location.
Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order
to prevent the invalid memory access.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/2e2d9ec34fb1df8ab8e2749199822db8cc91d302.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The iio_triggered_buffer_setup_ext() was changed by
commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().
The added attribute "wrapping" does not copy the pointer to stored
string constant and when the sysfs file is read the kernel will access
to invalid location.
Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order
to prevent the invalid memory access.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/19158499623cdf7f9c5efae1f13c9f1a918ff75f.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The iio_triggered_buffer_setup_ext() was changed by
commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().
The added attribute "wrapping" does not copy the pointer to stored
string constant and when the sysfs file is read the kernel will access
to invalid location.
Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order
to prevent the invalid memory access.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/be69775aa302159f088b8b91894e6ec449bca65b.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Currently, every time the device wakes up from sleep, the
iio_chan array is reallocated, leaking the previous one
until the device is removed (basically never).
Move the allocation to the probe function to avoid this.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Fixes: f110f3188e563 ("iio: temperature: Add support for LTC2983")
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221014123724.1401011-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The iio_utils uses a digit calculation in order to know length of the
file name containing a buffer number. The digit calculation does not
work for number 0.
This leads to allocation of one character too small buffer for the
file-name when file name contains value '0'. (Eg. buffer0).
Fix digit calculation by returning one digit to be present for number
'0'.
Fixes: 096f9b862e60 ("tools:iio:iio_utils: implement digit calculation")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/Y0f+tKCz+ZAIoroQ@dc75zzyyyyyyyyyyyyycy-3.rev.dnainternet.fi
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Fix channel init for ADC generic channel bindings.
In generic channel initialization, stm32_adc_smpr_init() is called to
initialize channel sampling time. The "st,min-sample-time-ns" property
is an optional property. If it is not defined, stm32_adc_smpr_init() is
currently skipped.
However stm32_adc_smpr_init() must always be called, to force a minimum
sampling time for the internal channels, as the minimum sampling time is
known. Make stm32_adc_smpr_init() call unconditional.
Fixes: 796e5d0b1e9b ("iio: adc: stm32-adc: use generic binding for sample-time")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221012142205.13041-2-olivier.moysan@foss.st.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The Device ID should not be included when printing register.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20221010194654.676525-1-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The device ID should be shifted 6 bits to left according to datasheet.
Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20221010194641.676484-1-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
smatch warnings:
drivers/iio/adc/mcp3911.c:441 mcp3911_probe() warn: passing zero to 'PTR_ERR'
Fixes: 08a65f61db69 ("iio: adc: mcp3911: add support for interrupts")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20220927092537.94663-1-marcus.folkesson@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This code uses sizeof() instead of ARRAY_SIZE() so it reads beyond the
end of the mcp3911_osr_table[] array.
Fixes: 6d965885f4ea ("iio: adc: mcp3911: add support for oversampling ratio")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/YzFsjY3xLHUQMjVr@kili
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
tsl2583 probe() uses devm_iio_device_register() and calling
iio_device_unregister() causes the unregister to occur twice. s
Switch to iio_device_register() instead of devm_iio_device_register()
in probe to avoid the device managed cleanup.
Fixes: 371894f5d1a0 ("iio: tsl2583: add runtime power management support")
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Link: https://lore.kernel.org/r/20220826122352.288438-1-shreeya.patel@collabora.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
s_inodes is superblock-specific resource, which should be
protected by sb's specific lock s_inode_list_lock.
Link: https://lore.kernel.org/r/TYCP286MB23238380DE3B74874E8D78ABCA299@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Fixes: 7d41963759fe ("erofs: Support sharing cookies in the same domain")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Commit a88520bfc0ec ("usb: gadget: tegra: Reduce pad power") added calls
to tegra_phy_xusb_utmi_pad_power_on/down in the Tegra XUDC driver to
control the pad power. This change is causing a kernel panic when
powering down the pads on entering suspend with the Jetson TX2 platform.
The panic occurs because the 'xudc->curr_utmi_phy' is not configured on
this platform and we do not check to see if the pointer is valid before
attempting to deference the pointer. Fix this by checking to see if the
'phy' pointer passed to tegra_phy_xusb_utmi_pad_power_on/down is valid.
Fixes: a88520bfc0ec ("usb: gadget: tegra: Reduce pad power")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20221010135132.30809-1-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
If "index > usbphyc->nphys" is true then this returns success but it
should return -EINVAL.
Fixes: 94c358da3a05 ("phy: stm32: add support for STM32 USB PHY Controller (USBPHYC)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/Y0kq8j6S+5nDdMpr@kili
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Update Kishon's email address in GENERIC PHY FRAMEWORK maintainer
entry.
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20221014062424.3327-1-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add a compatible for Goodix touch screen chip GT7986U which is
is expected to be fully compatible with a driver written for GT7375P.
Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221006185333.v7.3.I52e4b4b20e2eb0ae20f2a9bb198aa6410f04cf16@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
UBSAN complains about array-index-out-of-bounds:
[ 1.980703] kernel: UBSAN: array-index-out-of-bounds in /build/linux-9H675w/linux-5.15.0/drivers/ata/libahci.c:968:41
[ 1.980709] kernel: index 15 is out of range for type 'ahci_em_priv [8]'
[ 1.980713] kernel: CPU: 0 PID: 209 Comm: scsi_eh_8 Not tainted 5.15.0-25-generic #25-Ubuntu
[ 1.980716] kernel: Hardware name: System manufacturer System Product Name/P5Q3, BIOS 1102 06/11/2010
[ 1.980718] kernel: Call Trace:
[ 1.980721] kernel: <TASK>
[ 1.980723] kernel: show_stack+0x52/0x58
[ 1.980729] kernel: dump_stack_lvl+0x4a/0x5f
[ 1.980734] kernel: dump_stack+0x10/0x12
[ 1.980736] kernel: ubsan_epilogue+0x9/0x45
[ 1.980739] kernel: __ubsan_handle_out_of_bounds.cold+0x44/0x49
[ 1.980742] kernel: ahci_qc_issue+0x166/0x170 [libahci]
[ 1.980748] kernel: ata_qc_issue+0x135/0x240
[ 1.980752] kernel: ata_exec_internal_sg+0x2c4/0x580
[ 1.980754] kernel: ? vprintk_default+0x1d/0x20
[ 1.980759] kernel: ata_exec_internal+0x67/0xa0
[ 1.980762] kernel: sata_pmp_read+0x8d/0xc0
[ 1.980765] kernel: sata_pmp_read_gscr+0x3c/0x90
[ 1.980768] kernel: sata_pmp_attach+0x8b/0x310
[ 1.980771] kernel: ata_eh_revalidate_and_attach+0x28c/0x4b0
[ 1.980775] kernel: ata_eh_recover+0x6b6/0xb30
[ 1.980778] kernel: ? ahci_do_hardreset+0x180/0x180 [libahci]
[ 1.980783] kernel: ? ahci_stop_engine+0xb0/0xb0 [libahci]
[ 1.980787] kernel: ? ahci_do_softreset+0x290/0x290 [libahci]
[ 1.980792] kernel: ? trace_event_raw_event_ata_eh_link_autopsy_qc+0xe0/0xe0
[ 1.980795] kernel: sata_pmp_eh_recover.isra.0+0x214/0x560
[ 1.980799] kernel: sata_pmp_error_handler+0x23/0x40
[ 1.980802] kernel: ahci_error_handler+0x43/0x80 [libahci]
[ 1.980806] kernel: ata_scsi_port_error_handler+0x2b1/0x600
[ 1.980810] kernel: ata_scsi_error+0x9c/0xd0
[ 1.980813] kernel: scsi_error_handler+0xa1/0x180
[ 1.980817] kernel: ? scsi_unjam_host+0x1c0/0x1c0
[ 1.980820] kernel: kthread+0x12a/0x150
[ 1.980823] kernel: ? set_kthread_struct+0x50/0x50
[ 1.980826] kernel: ret_from_fork+0x22/0x30
[ 1.980831] kernel: </TASK>
This happens because sata_pmp_init_links() initialize link->pmp up to
SATA_PMP_MAX_PORTS while em_priv is declared as 8 elements array.
I can't find the maximum Enclosure Management ports specified in AHCI
spec v1.3.1, but "12.2.1 LED message type" states that "Port Multiplier
Information" can utilize 4 bits, which implies it can support up to 16
ports. Hence, use SATA_PMP_MAX_PORTS as EM_MAX_SLOTS to resolve the
issue.
BugLink: https://bugs.launchpad.net/bugs/1970074
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
'ahci:' is an invalid prefix, preventing the module from autoloading.
Fix this by using the 'platform:' prefix and DRV_NAME.
Fixes: 9e54eae23bc9 ("ahci_imx: add ahci sata support on imx platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
This debug statement was never meant to go into the upstream release,
kill it off before it ends up in a release. It was just part of the
testing for the initial version of the patch.
Fixes: 2ec33a6c3cca ("io_uring/rw: ensure kiocb_end_write() is always called")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Our syzkaller report a null pointer dereference, root cause is
following:
__blk_mq_alloc_map_and_rqs
set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs
blk_mq_alloc_map_and_rqs
blk_mq_alloc_rqs
// failed due to oom
alloc_pages_node
// set->tags[hctx_idx] is still NULL
blk_mq_free_rqs
drv_tags = set->tags[hctx_idx];
// null pointer dereference is triggered
blk_mq_clear_rq_mapping(drv_tags, ...)
This is because commit 63064be150e4 ("blk-mq:
Add blk_mq_alloc_map_and_rqs()") merged the two steps:
1) set->tags[hctx_idx] = blk_mq_alloc_rq_map()
2) blk_mq_alloc_rqs(..., set->tags[hctx_idx])
into one step:
set->tags[hctx_idx] = blk_mq_alloc_map_and_rqs()
Since tags is not initialized yet in this case, fix the problem by
checking if tags is NULL pointer in blk_mq_clear_rq_mapping().
Fixes: 63064be150e4 ("blk-mq: Add blk_mq_alloc_map_and_rqs()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/20221011142253.4015966-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
We should not be completing requests from a task context that has already
undergone io_uring cancellations, i.e. __io_uring_cancel(), as there are
some assumptions, e.g. around cached task refs draining. Remove
iopolling from io_ring_ctx_wait_and_kill() as it can be called later
after PF_EXITING is set with the last task_work run.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7c03cc91455c4a1af49c6b9cbda4e57ea467aa11.1665891182.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
