| Age | Commit message (Collapse) | Author |
|---|
|
Currently when there is a rx page allocation failure, it is
possible that polling may be stopped if there is no more packet
to be reveiced, which may cause queue stall problem under memory
pressure.
This patch makes sure polling is scheduled again when there is
any rx page allocation failure, and polling will try to allocate
receive buffers until it succeeds.
Now the allocation retry is added, it is unnecessary to do the rx
page allocation at the end of rx cleaning, so remove it. And reset
the unused_count to zero after calling hns3_nic_alloc_rx_buffers()
to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under
memory pressure.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
rx unused desc is the desc that need attatching new buffer
before refilling to hw to receive new packet, the number of
desc need attatching new buffer is calculated using next_to_use
and next_to_clean. when next_to_use == next_to_clean, currently
hns3 driver assumes that all the desc has the buffer attatched,
but 'next_to_use == next_to_clean' also means all the desc need
attatching new buffer if hw has comsumed all the desc and the
driver has not attatched any buffer to the desc yet.
This patch adds 'refill' in desc_cb to indicate whether a new
buffer has been refilled to a desc.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the max tx size supported by the hw is calculated by
using the max BD num supported by the hw. According to the hw
user manual, the max tx size is fixed value for both non-TSO and
TSO skb.
This patch updates the max tx size according to the manual.
Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP
mode. In this case, this tc may occupy all the tx bandwidth if it has
huge traffic, so it violates the purpose of the user setting.
To fix this problem, limit the ets dwrr bandwidth must greater than 0.
Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, DWRR of tc will be initialized to a fixed value when this tc
is enabled, but it is not been reset to 0 when this tc is disabled. It
cause a problem that the DWRR of unused tc is not 0 after using tc tool
to add and delete multi-tc parameters.
For examples, after enabling 4 TCs and restoring to 1 TC by follow
tc commands:
$ tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 1 2 3 queues \
8@0 8@8 8@16 8@24 hw 1 mode channel
$ tc qdisc del dev eth0 root
Now there is just one TC is enabled for eth0, but the tc info querying by
debugfs is shown as follow:
$ cat /mnt/hns3/0000:7d:00.0/tm/tc_sch_info
enabled tc number: 1
weight_offset: 14
TC MODE WEIGHT
0 dwrr 100
1 dwrr 100
2 dwrr 100
3 dwrr 100
4 dwrr 0
5 dwrr 0
6 dwrr 0
7 dwrr 0
This patch fixes it by resetting DWRR of tc to 0 when tc is disabled.
Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add configuration of interrupt type and fifo interrupt enable of TM QCN
error event if enabled, otherwise this event will not be reported when
there is error.
Fixes: d914971df022 ("net: hns3: remove redundant query in hclge_config_tm_hw_err_int()")
Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we
get:
BUG: scheduling while atomic: swapper/1/0/0x00000000
no locks held by swapper/1/0.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100
Call Trace:
dump_stack_lvl+0xac/0x108
__schedule_bug+0xac/0xe0
__schedule+0xcf8/0x10d0
schedule_idle+0x3c/0x70
do_idle+0x2d8/0x4a0
cpu_startup_entry+0x38/0x40
start_secondary+0x2ec/0x3a0
start_secondary_prolog+0x10/0x14
This is because powerpc's arch_cpu_idle_dead() decrements the idle task's
preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc:
Re-enable preemption before cpu_die()"), specifically "start_secondary()
expects a preempt_count() of 0."
However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle
task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core:
Initialize the idle task with preemption disabled"), that justification no
longer holds.
The idle task isn't supposed to re-enable preemption, so remove the
vestigial preempt_enable() from the CPU offline path.
Tested with pseries and powernv in qemu, and pseries on PowerVM.
Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
|
|
In isa206_idle_insn_mayloss() we store various registers into the stack
red zone, which is allowed.
However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again,
to 0(r1), which corrupts the stack back chain.
We used to do the same in isa206_idle_insn_mayloss() itself, but we
fixed that in 73287caa9210 ("powerpc64/idle: Fix SP offsets when saving
GPRs"), however we missed that the macro also corrupts the back chain.
Corrupting the back chain is bad for debuggability but doesn't
necessarily cause a bug.
However we recently changed the stack handling in some KVM code, and it
now relies on the stack back chain being valid when it returns. The
corruption causes that code to return with r1 pointing somewhere in
kernel data, at some point LR is restored from the stack and we branch
to NULL or somewhere else invalid.
Only affects Power8 hosts running KVM guests, with dynamic_mt_modes
enabled (which it is by default).
The fixes tag below points to the commit that changed the KVM stack
handling, exposing this bug. The actual corruption of the back chain has
always existed since 948cf67c4726 ("powerpc: Add NAP mode support on
Power7 in HV mode").
Fixes: 9b4416c5095c ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au
|
|
This reverts commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1.
When an interface is enslaved in a VRF, prerouting conntrack hook is
called twice: once in the context of the original input interface, and
once in the context of the VRF interface. If no special precausions are
taken, this leads to creation of two conntrack entries instead of one,
and breaks SNAT.
Commit above was intended to avoid creation of extra conntrack entries
when input interface is enslaved in a VRF. It did so by resetting
conntrack related data associated with the skb when it enters VRF context.
However it breaks netfilter operation. Imagine a use case when conntrack
zone must be assigned based on the original input interface, rather than
VRF interface (that would make original interfaces indistinguishable). One
could create netfilter rules similar to these:
chain rawprerouting {
type filter hook prerouting priority raw;
iif realiface1 ct zone set 1 return
iif realiface2 ct zone set 2 return
}
This works before the mentioned commit, but not after: zone assignment
is "forgotten", and any subsequent NAT or filtering that is dependent
on the conntrack zone does not work.
Here is a reproducer script that demonstrates the difference in behaviour.
==========
#!/bin/sh
# This script demonstrates unexpected change of nftables behaviour
# caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack
# connection on VRF rcv"
# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1
#
# Before the commit, it was possible to assign conntrack zone to a
# packet (or mark it for `notracking`) in the prerouting chanin, raw
# priority, based on the `iif` (interface from which the packet
# arrived).
# After the change, # if the interface is enslaved in a VRF, such
# assignment is lost. Instead, assignment based on the `iif` matching
# the VRF master interface is honored. Thus it is impossible to
# distinguish packets based on the original interface.
#
# This script demonstrates this change of behaviour: conntrack zone 1
# or 2 is assigned depending on the match with the original interface
# or the vrf master interface. It can be observed that conntrack entry
# appears in different zone in the kernel versions before and after
# the commit.
IPIN=172.30.30.1
IPOUT=172.30.30.2
PFXL=30
ip li sh vein >/dev/null 2>&1 && ip li del vein
ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf
nft list table testct >/dev/null 2>&1 && nft delete table testct
ip li add vein type veth peer veout
ip li add tvrf type vrf table 9876
ip li set veout master tvrf
ip li set vein up
ip li set veout up
ip li set tvrf up
/sbin/sysctl -w net.ipv4.conf.veout.accept_local=1
/sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0
ip addr add $IPIN/$PFXL dev vein
ip addr add $IPOUT/$PFXL dev veout
nft -f - <<__END__
table testct {
chain rawpre {
type filter hook prerouting priority raw;
iif { veout, tvrf } meta nftrace set 1
iif veout ct zone set 1 return
iif tvrf ct zone set 2 return
notrack
}
chain rawout {
type filter hook output priority raw;
notrack
}
}
__END__
uname -rv
conntrack -F
ping -W 1 -c 1 -I vein $IPOUT
conntrack -L
Signed-off-by: Eugene Crosser <crosser@average.org>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we return before the end of the 'for_each_child_of_node()' iterator, the
reference taken on 'port' must be released.
Add the missing 'of_node_put()' calls.
Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/15d5310d1d55ad51c1af80775865306d92432e03.1634587046.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of leaking the ucounts in new if alloc_ucounts fails, store
the result of alloc_ucounts into a temporary variable, which is later
assigned to new->ucounts.
Cc: stable@vger.kernel.org
Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred")
Link: https://lkml.kernel.org/r/87pms2s0v8.fsf_-_@disp2133
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The purpose of inc_rlimit_ucounts and dec_rlimit_ucounts in commit_creds
is to change which rlimit counter is used to track a process when the
credentials changes.
Use the same test for both to guarantee the tracking is correct.
Cc: stable@vger.kernel.org
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Link: https://lkml.kernel.org/r/87v91us0w4.fsf_-_@disp2133
Tested-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Merge misc fixes from Andrew Morton:
"19 patches.
Subsystems affected by this patch series: mm (userfaultfd, migration,
memblock, mempolicy, slub, secretmem, and thp), ocfs2, binfmt, vfs,
and misc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: add Andrej Shadura
mm/thp: decrease nr_thps in file's mapping on THP split
mm/secretmem: fix NULL page->mapping dereference in page_is_secretmem()
vfs: check fd has read access in kernel_read_file_from_fd()
elfcore: correct reference to CONFIG_UML
mm, slub: fix incorrect memcg slab count for bulk free
mm, slub: fix potential use-after-free in slab_debugfs_fops
mm, slub: fix potential memoryleak in kmem_cache_open()
mm, slub: fix mismatch between reconstructed freelist depth and cnt
mm, slub: fix two bugs in slab_debug_trace_open()
mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind()
memblock: check memory total_size
ocfs2: mount fails with buffer overflow in strlen
ocfs2: fix data corruption after conversion from inline format
mm/migrate: fix CPUHP state to update node demotion order
mm/migrate: add CPU hotplug to demotion #ifdef
mm/migrate: optimize hotplug-time demotion order updates
userfaultfd: fix a race between writeprotect and exit_mmap()
mm/userfaultfd: selftests: fix memory corruption with thp enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2021-10-19
this is a pull request of a single patch for net/master.
The patch is by me and fixes the error handling in case of a FC
timeout in the TX path of the ISOTOP CAN protocol.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we check the wb_err too early for directories, before all of
the unsafe child requests have been waited on. In order to fix that we
need to check the mapping->wb_err later nearer to the end of ceph_fsync.
We also have an overly-complex method for tracking errors after
blocklisting. The errors recorded in cleanup_session_requests go to a
completely separate field in the inode, but we end up reporting them the
same way we would for any other error (in fsync).
There's no real benefit to tracking these errors in two different
places, since the only reporting mechanism for them is in fsync, and
we'd need to advance them both every time.
Given that, we can just remove i_meta_err, and convert the places that
used it to instead just use mapping->wb_err instead. That also fixes
the original problem by ensuring that we do a check_and_advance of the
wb_err at the end of the fsync op.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52864
Reported-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Currently when mounting, we may end up finding an existing superblock
that corresponds to a blocklisted MDS client. This means that the new
mount ends up being unusable.
If we've found an existing superblock with a client that is already
blocklisted, and the client is not configured to recover on its own,
fail the match. Ditto if the superblock has been forcibly unmounted.
While we're in here, also rename "other" to the more conventional "fsc".
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When the a large chunk of data send and the receiver does not send a
Flow Control frame back in time, the sendmsg() does not return a error
code, but the number of bytes sent corresponding to the size of the
packet.
If a timeout occurs the isotp_tx_timer_handler() is fired, sets
sk->sk_err and calls the sk->sk_error_report() function. It was
wrongly expected that the error would be propagated to user space in
every case. For isotp_sendmsg() blocking on wait_event_interruptible()
this is not the case.
This patch fixes the problem by checking if sk->sk_err is set and
returning the error to user space.
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Link: https://github.com/hartkopp/can-isotp/issues/42
Link: https://github.com/hartkopp/can-isotp/pull/43
Link: https://lore.kernel.org/all/20210507091839.1366379-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Sottas Guillaume (LMB) <Guillaume.Sottas@liebherr.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add a mapping for my old work email for BelDisplayTech to the personal
email, and make sure the Collabora email has the correct spelling of the
first name.
Link: https://lkml.kernel.org/r/20210917091016.30232-1-andrew.shadura@collabora.co.uk
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Decrease nr_thps counter in file's mapping to ensure that the page cache
won't be dropped excessively on file write access if page has been
already split.
I've tried a test scenario running a big binary, kernel remaps it with
THPs, then force a THP split with /sys/kernel/debug/split_huge_pages.
During any further open of that binary with O_RDWR or O_WRITEONLY kernel
drops page cache for it, because of non-zero thps counter.
Link: https://lkml.kernel.org/r/20211012120237.2600-1-m.szyprowski@samsung.com
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 09d91cda0e82 ("mm,thp: avoid writes to file with THP in pagecache")
Fixes: 06d3eff62d9d ("mm/thp: fix node page state in split_huge_page_to_list()")
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <sfoon.kim@samsung.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Check for a NULL page->mapping before dereferencing the mapping in
page_is_secretmem(), as the page's mapping can be nullified while gup()
is running, e.g. by reclaim or truncation.
BUG: kernel NULL pointer dereference, address: 0000000000000068
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 6 PID: 4173897 Comm: CPU 3/KVM Tainted: G W
RIP: 0010:internal_get_user_pages_fast+0x621/0x9d0
Code: <48> 81 7a 68 80 08 04 bc 0f 85 21 ff ff 8 89 c7 be
RSP: 0018:ffffaa90087679b0 EFLAGS: 00010046
RAX: ffffe3f37905b900 RBX: 00007f2dd561e000 RCX: ffffe3f37905b934
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffe3f37905b900
...
CR2: 0000000000000068 CR3: 00000004c5898003 CR4: 00000000001726e0
Call Trace:
get_user_pages_fast_only+0x13/0x20
hva_to_pfn+0xa9/0x3e0
try_async_pf+0xa1/0x270
direct_page_fault+0x113/0xad0
kvm_mmu_page_fault+0x69/0x680
vmx_handle_exit+0xe1/0x5d0
kvm_arch_vcpu_ioctl_run+0xd81/0x1c70
kvm_vcpu_ioctl+0x267/0x670
__x64_sys_ioctl+0x83/0xa0
do_syscall_64+0x56/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lkml.kernel.org/r/20211007231502.3552715-1-seanjc@google.com
Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: Stephen <stephenackerman16@gmail.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we open a file without read access and then pass the fd to a syscall
whose implementation calls kernel_read_file_from_fd(), we get a warning
from __kernel_read():
if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ)))
This currently affects both finit_module() and kexec_file_load(), but it
could affect other syscalls in the future.
Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org
Fixes: b844f0ecbc56 ("vfs: define kernel_copy_file_from_fd()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 6e7b64b9dd6d ("elfcore: fix building with clang") introduces
special handling for two architectures, ia64 and User Mode Linux.
However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig
symbol for User-Mode Linux was used.
Although the directory for User Mode Linux is ./arch/um; the Kconfig
symbol for this architecture is called CONFIG_UML.
Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs:
UM
Referencing files: include/linux/elfcore.h
Similar symbols: UML, NUMA
Correct the name of the config to the intended one.
[akpm@linux-foundation.org: fix um/x86_64, per Catalin]
Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com
Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com
Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com
Fixes: 6e7b64b9dd6d ("elfcore: fix building with clang")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Barret Rhoden <brho@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmem_cache_free_bulk() will call memcg_slab_free_hook() for all objects
when doing bulk free. So we shouldn't call memcg_slab_free_hook() again
for bulk free to avoid incorrect memcg slab count.
Link: https://lkml.kernel.org/r/20210916123920.48704-6-linmiaohe@huawei.com
Fixes: d1b2cf6cb84a ("mm: memcg/slab: uncharge during kmem_cache_free_bulk()")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When sysfs_slab_add failed, we shouldn't call debugfs_slab_add() for s
because s will be freed soon. And slab_debugfs_fops will use s later
leading to a use-after-free.
Link: https://lkml.kernel.org/r/20210916123920.48704-5-linmiaohe@huawei.com
Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In error path, the random_seq of slub cache might be leaked. Fix this
by using __kmem_cache_release() to release all the relevant resources.
Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com
Fixes: 210e7a43fa90 ("mm: SLUB freelist randomization")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If object's reuse is delayed, it will be excluded from the reconstructed
freelist. But we forgot to adjust the cnt accordingly. So there will
be a mismatch between reconstructed freelist depth and cnt. This will
lead to free_debug_processing() complaining about freelist count or a
incorrect slub inuse count.
Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com
Fixes: c3895391df38 ("kasan, slub: fix handling of kasan_slab_free hook")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Fixups for slub".
This series contains various bug fixes for slub. We fix memoryleak,
use-afer-free, NULL pointer dereferencing and so on in slub. More
details can be found in the respective changelogs.
This patch (of 5):
It's possible that __seq_open_private() will return NULL. So we should
check it before using lest dereferencing NULL pointer. And in error
paths, we forgot to release private buffer via seq_release_private().
Memory will leak in these paths.
Link: https://lkml.kernel.org/r/20210916123920.48704-1-linmiaohe@huawei.com
Link: https://lkml.kernel.org/r/20210916123920.48704-2-linmiaohe@huawei.com
Fixes: 64dd68497be7 ("mm: slub: move sysfs slab alloc/free interfaces to debugfs")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Faiyaz Mohammed <faiyazm@codeaurora.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot reported access to unitialized memory in mbind() [1]
Issue came with commit bda420b98505 ("numa balancing: migrate on fault
among multiple bound nodes")
This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid
combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in
do_set_mempolicy()
This patch moves the check in sanitize_mpol_flags() so that it is also
used by mbind()
[1]
BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Uninit was created at:
slab_alloc_node mm/slub.c:3221 [inline]
slab_alloc mm/slub.c:3230 [inline]
kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235
mpol_new mm/mempolicy.c:293 [inline]
do_mbind+0x912/0x15f0 mm/mempolicy.c:1289
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
=====================================================
Kernel panic - not syncing: panic_on_kmsan set ...
CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106
dump_stack+0x25/0x28 lib/dump_stack.c:113
panic+0x44f/0xdeb kernel/panic.c:232
kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186
__msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208
__mpol_equal+0x567/0x590 mm/mempolicy.c:2260
mpol_equal include/linux/mempolicy.h:105 [inline]
vma_merge+0x4a1/0x1e60 mm/mmap.c:1190
mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811
do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333
kernel_mbind mm/mempolicy.c:1483 [inline]
__do_sys_mbind mm/mempolicy.c:1490 [inline]
__se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486
__x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lkml.kernel.org/r/20211001215630.810592-1-eric.dumazet@gmail.com
Fixes: bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mem=[X][G|M] is broken on ARM64 platform, there are cases that even
type.cnt is 1, but total_size is not 0 because regions are merged into
1. So only check 'cnt' is not enough, total_size should be used,
othersize bootargs 'mem=[X][G|B]' not work anymore.
Link: https://lkml.kernel.org/r/20210930024437.32598-1-peng.fan@oss.nxp.com
Fixes: e888fa7bb882 ("memblock: Check memory add/cap ordering")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an
ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the
trace below. Problem seems to be that strings for cluster stack and
cluster name are not guaranteed to be null terminated in the disk
representation, while strlcpy assumes that the source string is always
null terminated. This causes a read outside of the source string
triggering the buffer overflow detection.
detected buffer overflow in strlen
------------[ cut here ]------------
kernel BUG at lib/string.c:1149!
invalid opcode: 0000 [#1] SMP PTI
CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1
Debian 5.14.6-2
RIP: 0010:fortify_panic+0xf/0x11
...
Call Trace:
ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2]
ocfs2_fill_super+0x359/0x19b0 [ocfs2]
mount_bdev+0x185/0x1b0
legacy_get_tree+0x27/0x40
vfs_get_tree+0x25/0xb0
path_mount+0x454/0xa20
__x64_sys_mount+0x103/0x140
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr
Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 6dbf7bb55598 ("fs: Don't invalidate page buffers in
block_write_full_page()") uncovered a latent bug in ocfs2 conversion
from inline inode format to a normal inode format.
The code in ocfs2_convert_inline_data_to_extents() attempts to zero out
the whole cluster allocated for file data by grabbing, zeroing, and
dirtying all pages covering this cluster. However these pages are
beyond i_size, thus writeback code generally ignores these dirty pages
and no blocks were ever actually zeroed on the disk.
This oversight was fixed by commit 693c241a5f6a ("ocfs2: No need to zero
pages past i_size.") for standard ocfs2 write path, inline conversion
path was apparently forgotten; the commit log also has a reasoning why
the zeroing actually is not needed.
After commit 6dbf7bb55598, things became worse as writeback code stopped
invalidating buffers on pages beyond i_size and thus these pages end up
with clean PageDirty bit but with buffers attached to these pages being
still dirty. So when a file is converted from inline format, then
writeback triggers, and then the file is grown so that these pages
become valid, the invalid dirtiness state is preserved,
mark_buffer_dirty() does nothing on these pages (buffers are already
dirty) but page is never written back because it is clean. So data
written to these pages is lost once pages are reclaimed.
Simple reproducer for the problem is:
xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \
-c "pwrite 4000 2000" ocfs2_file
After unmounting and mounting the fs again, you can observe that end of
'ocfs2_file' has lost its contents.
Fix the problem by not doing the pointless zeroing during conversion
from inline format similarly as in the standard write path.
[akpm@linux-foundation.org: fix whitespace, per Joseph]
Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz
Fixes: 6dbf7bb55598 ("fs: Don't invalidate page buffers in block_write_full_page()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: "Markov, Andrey" <Markov.Andrey@Dell.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The node demotion order needs to be updated during CPU hotplug. Because
whether a NUMA node has CPU may influence the demotion order. The
update function should be called during CPU online/offline after the
node_states[N_CPU] has been updated. That is done in
CPUHP_AP_ONLINE_DYN during CPU online and in CPUHP_MM_VMSTAT_DEAD during
CPU offline. But in commit 884a6e5d1f93 ("mm/migrate: update node
demotion order on hotplug events"), the function to update node demotion
order is called in CPUHP_AP_ONLINE_DYN during CPU online/offline. This
doesn't satisfy the order requirement.
For example, there are 4 CPUs (P0, P1, P2, P3) in 2 sockets (P0, P1 in S0
and P2, P3 in S1), the demotion order is
- S0 -> NUMA_NO_NODE
- S1 -> NUMA_NO_NODE
After P2 and P3 is offlined, because S1 has no CPU now, the demotion
order should have been changed to
- S0 -> S1
- S1 -> NO_NODE
but it isn't changed, because the order updating callback for CPU
hotplug doesn't see the new nodemask. After that, if P1 is offlined,
the demotion order is changed to the expected order as above.
So in this patch, we added CPUHP_AP_MM_DEMOTION_ONLINE and
CPUHP_MM_DEMOTION_DEAD to be called after CPUHP_AP_ONLINE_DYN and
CPUHP_MM_VMSTAT_DEAD during CPU online and offline, and register the
update function on them.
Link: https://lkml.kernel.org/r/20210929060351.7293-1-ying.huang@intel.com
Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Once upon a time, the node demotion updates were driven solely by memory
hotplug events. But now, there are handlers for both CPU and memory
hotplug.
However, the #ifdef around the code checks only memory hotplug. A
system that has HOTPLUG_CPU=y but MEMORY_HOTPLUG=n would miss CPU
hotplug events.
Update the #ifdef around the common code. Add memory and CPU-specific
#ifdefs for their handlers. These memory/CPU #ifdefs avoid unused
function warnings when their Kconfig option is off.
[arnd@arndb.de: rework hotplug_memory_notifier() stub]
Link: https://lkml.kernel.org/r/20211013144029.2154629-1-arnd@kernel.org
Link: https://lkml.kernel.org/r/20210924161255.E5FE8F7E@davehans-spike.ostc.intel.com
Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm/migrate: 5.15 fixes for automatic demotion", v2.
This contains two fixes for the "automatic demotion" code which was
merged into 5.15:
* Fix memory hotplug performance regression by watching
suppressing any real action on irrelevant hotplug events.
* Ensure CPU hotplug handler is registered when memory hotplug
is disabled.
This patch (of 2):
== tl;dr ==
Automatic demotion opted for a simple, lazy approach to handling hotplug
events. This noticeably slows down memory hotplug[1]. Optimize away
updates to the demotion order when memory hotplug events should have no
effect.
This has no effect on CPU hotplug. There is no known problem on the CPU
side and any work there will be in a separate series.
== Background ==
Automatic demotion is a memory migration strategy to ensure that new
allocations have room in faster memory tiers on tiered memory systems.
The kernel maintains an array (node_demotion[]) to drive these
migrations.
The node_demotion[] path is calculated by starting at nodes with CPUs
and then "walking" to nodes with memory. Only hotplug events which
online or offline a node with memory (N_ONLINE) or CPUs (N_CPU) will
actually affect the migration order.
== Problem ==
However, the current code is lazy. It completely regenerates the
migration order on *any* CPU or memory hotplug event. The logic was
that these events are extremely rare and that the overhead from
indiscriminate order regeneration is minimal.
Part of the update logic involves a synchronize_rcu(), which is a pretty
big hammer. Its overhead was large enough to be detected by some 0day
tests that watch memory hotplug performance[1].
== Solution ==
Add a new helper (node_demotion_topo_changed()) which can differentiate
between superfluous and impactful hotplug events. Skip the expensive
update operation for superfluous events.
== Aside: Locking ==
It took me a few moments to declare the locking to be safe enough for
node_demotion_topo_changed() to work. It all hinges on the memory
hotplug lock:
During memory hotplug events, 'mem_hotplug_lock' is held for write.
This ensures that two memory hotplug events can not be called
simultaneously.
CPU hotplug has a similar lock (cpuhp_state_mutex) which also provides
mutual exclusion between CPU hotplug events. In addition, the demotion
code acquire and hold the mem_hotplug_lock for read during its CPU
hotplug handlers. This provides mutual exclusion between the demotion
memory hotplug callbacks and the CPU hotplug callbacks.
This effectively allows treating the migration target generation code to
act as if it is single-threaded.
1. https://lore.kernel.org/all/20210905135932.GE15026@xsang-OptiPlex-9020/
Link: https://lkml.kernel.org/r/20210924161251.093CCD06@davehans-spike.ostc.intel.com
Link: https://lkml.kernel.org/r/20210924161253.D7673E31@davehans-spike.ostc.intel.com
Fixes: 884a6e5d1f93 ("mm/migrate: update node demotion order on hotplug events")
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A race is possible when a process exits, its VMAs are removed by
exit_mmap() and at the same time userfaultfd_writeprotect() is called.
The race was detected by KASAN on a development kernel, but it appears
to be possible on vanilla kernels as well.
Use mmget_not_zero() to prevent the race as done in other userfaultfd
operations.
Link: https://lkml.kernel.org/r/20210921200247.25749-1-namit@vmware.com
Fixes: 63b2d4174c4ad ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Signed-off-by: Nadav Amit <namit@vmware.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In RHEL's gating selftests we've encountered memory corruption in the
uffd event test even with upstream kernel:
# ./userfaultfd anon 128 4
nr_pages: 32768, nr_pages_per_cpu: 32768
bounces: 3, mode: rnd racing read, userfaults: 6240 missing (6240) 14729 wp (14729)
bounces: 2, mode: racing read, userfaults: 1444 missing (1444) 28877 wp (28877)
bounces: 1, mode: rnd read, userfaults: 6055 missing (6055) 14699 wp (14699)
bounces: 0, mode: read, userfaults: 82 missing (82) 25196 wp (25196)
testing uffd-wp with pagemap (pgsize=4096): done
testing uffd-wp with pagemap (pgsize=2097152): done
testing events (fork, remap, remove): ERROR: nr 32427 memory corruption 0 1 (errno=0, line=963)
ERROR: faulting process failed (errno=0, line=1117)
It can be easily reproduced when global thp enabled, which is the
default for RHEL.
It's also known as a side effect of commit 0db282ba2c12 ("selftest: use
mmap instead of posix_memalign to allocate memory", 2021-07-23), which
is imho right itself on using mmap() to make sure the addresses will be
untagged even on arm.
The problem is, for each test we allocate buffers using two
allocate_area() calls. We assumed these two buffers won't affect each
other, however they could, because mmap() could have found that the two
buffers are near each other and having the same VMA flags, so they got
merged into one VMA.
It won't be a big problem if thp is not enabled, but when thp is
agressively enabled it means when initializing the src buffer it could
accidentally setup part of the dest buffer too when there's a shared THP
that overlaps the two regions. Then some of the dest buffer won't be
able to be trapped by userfaultfd missing mode, then it'll cause memory
corruption as described.
To fix it, do release_pages() after initializing the src buffer.
Since the previous two release_pages() calls are after
uffd_test_ctx_clear() which will unmap all the buffers anyway (which is
stronger than release pages; as unmap() also tear town pgtables), drop
them as they shouldn't really be anything useful.
We can mark the Fixes tag upon 0db282ba2c12 as it's reported to only
happen there, however the real "Fixes" IMHO should be 8ba6e8640844, as
before that commit we'll always do explicit release_pages() before
registration of uffd, and 8ba6e8640844 changed that logic by adding
extra unmap/map and we didn't release the pages at the right place.
Meanwhile I don't have a solid glue anyway on whether posix_memalign()
could always avoid triggering this bug, hence it's safer to attach this
fix to commit 8ba6e8640844.
Link: https://lkml.kernel.org/r/20210923232512.210092-1-peterx@redhat.com
Fixes: 8ba6e8640844 ("userfaultfd/selftests: reinitialize test context in each test")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1994931
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Li Wang <liwan@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Reviewed-by: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a Jieli Technology USB Webcam is connected, the video part works
well, but the mic sound is speeded up. On dmesg there are messages
about different rates from the runtime rates, warnings about volume
resolution and lastly, the log is filled, every 5 seconds, with
retire_capture_urb error messages.
The mic works only when ep packet size is set to wMaxPacketSize (normal
sound and no more retire_capture_urb error messages). Skipping reading
sample rate, fixes the messages about different rates and forcing a volume
resolution, fixes warnings about volume range. I have arbitrarily choosed
the value (16): I read in a comment that there should be no more than 255
levels, so 4096 (max volume) / 16 = 0-255.
Signed-off-by: Marco Giunta <giun7a@gmail.com>
Link: https://lore.kernel.org/r/20211018162552.12082-1-giun7a@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix possible null-pointer dereference in audit_filter_rules.
audit_filter_rules() error: we previously assumed 'ctx' could be null
Cc: stable@vger.kernel.org
Fixes: bf361231c295 ("audit: add saddr_fam filter field")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
While writing an email explaining the "bit = 0" logic for a discussion on
making ftrace_test_recursion_trylock() disable preemption, I discovered a
path that makes the "not do the logic if bit is zero" unsafe.
The recursion logic is done in hot paths like the function tracer. Thus,
any code executed causes noticeable overhead. Thus, tricks are done to try
to limit the amount of code executed. This included the recursion testing
logic.
Having recursion testing is important, as there are many paths that can
end up in an infinite recursion cycle when tracing every function in the
kernel. Thus protection is needed to prevent that from happening.
Because it is OK to recurse due to different running context levels (e.g.
an interrupt preempts a trace, and then a trace occurs in the interrupt
handler), a set of bits are used to know which context one is in (normal,
softirq, irq and NMI). If a recursion occurs in the same level, it is
prevented*.
Then there are infrastructure levels of recursion as well. When more than
one callback is attached to the same function to trace, it calls a loop
function to iterate over all the callbacks. Both the callbacks and the
loop function have recursion protection. The callbacks use the
"ftrace_test_recursion_trylock()" which has a "function" set of context
bits to test, and the loop function calls the internal
trace_test_and_set_recursion() directly, with an "internal" set of bits.
If an architecture does not implement all the features supported by ftrace
then the callbacks are never called directly, and the loop function is
called instead, which will implement the features of ftrace.
Since both the loop function and the callbacks do recursion protection, it
was seemed unnecessary to do it in both locations. Thus, a trick was made
to have the internal set of recursion bits at a more significant bit
location than the function bits. Then, if any of the higher bits were set,
the logic of the function bits could be skipped, as any new recursion
would first have to go through the loop function.
This is true for architectures that do not support all the ftrace
features, because all functions being traced must first go through the
loop function before going to the callbacks. But this is not true for
architectures that support all the ftrace features. That's because the
loop function could be called due to two callbacks attached to the same
function, but then a recursion function inside the callback could be
called that does not share any other callback, and it will be called
directly.
i.e.
traced_function_1: [ more than one callback tracing it ]
call loop_func
loop_func:
trace_recursion set internal bit
call callback
callback:
trace_recursion [ skipped because internal bit is set, return 0 ]
call traced_function_2
traced_function_2: [ only traced by above callback ]
call callback
callback:
trace_recursion [ skipped because internal bit is set, return 0 ]
call traced_function_2
[ wash, rinse, repeat, BOOM! out of shampoo! ]
Thus, the "bit == 0 skip" trick is not safe, unless the loop function is
call for all functions.
Since we want to encourage architectures to implement all ftrace features,
having them slow down due to this extra logic may encourage the
maintainers to update to the latest ftrace features. And because this
logic is only safe for them, remove it completely.
[*] There is on layer of recursion that is allowed, and that is to allow
for the transition between interrupt context (normal -> softirq ->
irq -> NMI), because a trace may occur before the context update is
visible to the trace recursion logic.
Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/
Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A new warning in clang points out two places in this driver where
boolean expressions are being used with a bitwise OR instead of a
logical one:
drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: note: cast one or both operands to int to silence this warning
drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: note: cast one or both operands to int to silence this warning
2 errors generated.
The motivation for the warning is that logical operations short circuit
while bitwise operations do not. In this case, it does not seem like
short circuiting is harmful so implement the suggested fix of changing
to a logical operation to fix the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1479
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211018193101.2340261-1-nathan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Until we better understand the stability issues caused by frequent
frequency changes, lets limit them to a618.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20211018153627.2787882-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
In commit fda31c50292a ("signal: avoid double atomic counter
increments for user accounting") Linus made a clever optimization to
how rlimits and the struct user_struct. Unfortunately that
optimization does not work in the obvious way when moved to nested
rlimits. The problem is that the last decrement of the per user
namespace per user sigpending counter might also be the last decrement
of the sigpending counter in the parent user namespace as well. Which
means that simply freeing the leaf ucount in __free_sigqueue is not
enough.
Maintain the optimization and handle the tricky cases by introducing
inc_rlimit_get_ucounts and dec_rlimit_put_ucounts.
By moving the entire optimization into functions that perform all of
the work it becomes possible to ensure that every level is handled
properly.
The new function inc_rlimit_get_ucounts returns 0 on failure to
increment the ucount. This is different than inc_rlimit_ucounts which
increments the ucounts and returns LONG_MAX if the ucount counter has
exceeded it's maximum or it wrapped (to indicate the counter needs to
decremented).
I wish we had a single user to account all pending signals to across
all of the threads of a process so this complexity was not necessary
Cc: stable@vger.kernel.org
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
v1: https://lkml.kernel.org/r/87mtnavszx.fsf_-_@disp2133
Link: https://lkml.kernel.org/r/87fssytizw.fsf_-_@disp2133
Reviewed-by: Alexey Gladkov <legion@kernel.org>
Tested-by: Rune Kleveland <rune.kleveland@infomedia.dk>
Tested-by: Yu Zhao <yuzhao@google.com>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The size of the GHCB scratch area is limited to 16 KiB (GHCB_SCRATCH_AREA_LIMIT),
so there is no need for it to be a u64. This fixes a build error on 32-bit
systems:
i686-linux-gnu-ld: arch/x86/kvm/svm/sev.o: in function `sev_es_string_io:
sev.c:(.text+0x110f): undefined reference to `__udivdi3'
Cc: stable@vger.kernel.org
Fixes: 019057bd73d1 ("KVM: SEV-ES: fix length of string I/O")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Hardware may or may not set exit_reason.bus_lock_detected on BUS_LOCK
VM-Exits. Dealing with KVM_RUN_X86_BUS_LOCK in handle_bus_lock_vmexit
could be redundant when exit_reason.basic is EXIT_REASON_BUS_LOCK.
We can remove redundant handling of bus lock vmexit. Unconditionally Set
exit_reason.bus_lock_detected in handle_bus_lock_vmexit(), and deal with
KVM_RUN_X86_BUS_LOCK only in vmx_handle_exit().
Signed-off-by: Hao Xiang <hao.xiang@linux.alibaba.com>
Message-Id: <1634299161-30101-1-git-send-email-hao.xiang@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Similar to commit 111d0bda8eeb ("tools/kvm_stat: Exempt time-based
counters"), we should not show timer values in kvm_stat. Remove the new
halt_wait_ns.
Fixes: 87bcc5fa092f ("KVM: stats: Add halt_wait_ns stats for all architectures")
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Stefan Raspl <raspl@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20211006121724.4154-1-borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
WARN if the static keys used to track if any vCPU has disabled its APIC
are left elevated at module exit. Unlike the underflow case, nothing in
the static key infrastructure will complain if a key is left elevated,
and because an elevated key only affects performance, nothing in KVM will
fail if either key is improperly incremented.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211013003554.47705-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
RESET"
Revert a change to open code bits of kvm_lapic_set_base() when emulating
APIC RESET to fix an apic_hw_disabled underflow bug due to arch.apic_base
and apic_hw_disabled being unsyncrhonized when the APIC is created. If
kvm_arch_vcpu_create() fails after creating the APIC, kvm_free_lapic()
will see the initialized-to-zero vcpu->arch.apic_base and decrement
apic_hw_disabled without KVM ever having incremented apic_hw_disabled.
Using kvm_lapic_set_base() in kvm_lapic_reset() is also desirable for a
potential future where KVM supports RESET outside of vCPU creation, in
which case all the side effects of kvm_lapic_set_base() are needed, e.g.
to handle the transition from x2APIC => xAPIC.
Alternatively, KVM could temporarily increment apic_hw_disabled (and call
kvm_lapic_set_base() at RESET), but that's a waste of cycles and would
impact the performance of other vCPUs and VMs. The other subtle side
effect is that updating the xAPIC ID needs to be done at RESET regardless
of whether the APIC was previously enabled, i.e. kvm_lapic_reset() needs
an explicit call to kvm_apic_set_xapic_id() regardless of whether or not
kvm_lapic_set_base() also performs the update. That makes stuffing the
enable bit at vCPU creation slightly more palatable, as doing so affects
only the apic_hw_disabled key.
Opportunistically tweak the comment to explicitly call out the connection
between vcpu->arch.apic_base and apic_hw_disabled, and add a comment to
call out the need to always do kvm_apic_set_xapic_id() at RESET.
Underflow scenario:
kvm_vm_ioctl() {
kvm_vm_ioctl_create_vcpu() {
kvm_arch_vcpu_create() {
if (something_went_wrong)
goto fail_free_lapic;
/* vcpu->arch.apic_base is initialized when something_went_wrong is false. */
kvm_vcpu_reset() {
kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) {
vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE | MSR_IA32_APICBASE_ENABLE;
}
}
return 0;
fail_free_lapic:
kvm_free_lapic() {
/* vcpu->arch.apic_base is not yet initialized when something_went_wrong is true. */
if (!(vcpu->arch.apic_base & MSR_IA32_APICBASE_ENABLE))
static_branch_slow_dec_deferred(&apic_hw_disabled); // <= underflow bug.
}
return r;
}
}
}
This (mostly) reverts commit 421221234ada41b4a9f0beeb08e30b07388bd4bd.
Fixes: 421221234ada ("KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET")
Reported-by: syzbot+9fc046ab2b0cf295a063@syzkaller.appspotmail.com
Debugged-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211013003554.47705-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The refactoring in commit bb18a6777465 ("KVM: SEV: Acquire
vcpu mutex when updating VMSA") left behind the assignment to
svm->vcpu.arch.guest_state_protected; add it back.
Signed-off-by: Peter Gonda <pgonda@google.com>
[Delta between v2 and v3 of Peter's patch, which had already been
committed; the commit message is my own. - Paolo]
Fixes: bb18a6777465 ("KVM: SEV: Acquire vcpu mutex when updating VMSA")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
