| Age | Commit message (Collapse) | Author |
|---|
|
Bridge driver today has no support to forward the userspace timestamp
packets and ends up resetting the timestamp. ETF qdisc checks the
packet coming from userspace and encounters to be 0 thereby dropping
time sensitive packets. These changes will allow userspace timestamps
packets to be forwarded from the bridge to NIC drivers.
Setting the same bit (mono_delivery_time) to avoid dropping of
userspace tstamp packets in the forwarding path.
Existing functionality of mono_delivery_time remains unaltered here,
instead just extended with userspace tstamp support for bridge
forwarding path.
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240301201348.2815102-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Eric Dumazet says:
====================
net: gro: cleanups and fast path refinement
Current GRO stack has a 'fast path' for a subset of drivers,
users of napi_frags_skb().
With TCP zerocopy/direct uses, header split at receive is becoming
more important, and GRO fast path is disabled.
This series makes GRO (a bit) more efficient for almost all use cases.
====================
Link: https://lore.kernel.org/r/20240301193740.3436871-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In tcp_gro_complete() :
Moving the skb->inner_transport_header setting
allows the compiler to reuse the previously loaded value
of skb->transport_header.
Caching skb_shinfo() avoids duplications as well.
In tcp4_gro_complete(), doing a single change on
skb_shinfo(skb)->gso_type also generates better code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the so-called GRO fast path is only enabled for
napi_frags_skb() callers.
After the prior patch, we no longer have to clear frag0 whenever
we pulled bytes to skb->head.
We therefore can initialize frag0 to skb->data so that GRO
fast path can be used in the following additional cases:
- Drivers using header split (populating skb->data with headers,
and having payload in one or more page fragments).
- Drivers not using any page frag (entire packet is in skb->data)
Add a likely() in skb_gro_may_pull() to help the compiler
to generate better code if possible.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Change skb_gro_network_header() to accept a const sk_buff
and to no longer check if frag0 is NULL or not.
This allows to remove skb_gro_frag0_invalidate()
which is seen in profiles when header-split is enabled.
sk_buff parameter is constified for skb_gro_header_fast(),
inet_gro_compute_pseudo() and ip6_gro_compute_pseudo().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_gro_header_hard() is renamed to skb_gro_may_pull() to match
the convention used by common helpers like pskb_may_pull().
This means the condition is inverted:
if (skb_gro_header_hard(skb, hlen))
slow_path();
becomes:
if (!skb_gro_may_pull(skb, hlen))
slow_path();
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As there are some AMD processors which only support CPPC V2 firmware and
BIOS implementation, the amd_pstate driver will be failed to load when
system booting with below kernel warning message:
[ 0.477523] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
To make the amd_pstate driver can be loaded on those TR40 processors, it
needs to match x86_model from 0x30 to 0x7F for family 17H.
With the change, the system can load amd_pstate driver as expected.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Gino Badouri <badouri.g@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218171
Fixes: fbd74d1689 ("ACPI: CPPC: Fix enabling CPPC on AMD systems with shared memory")
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The first and the third lines of the kerneldoc comment for:
thermal_zone_device_set_polling()
belong to the same sentences, so join them together.
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
It is not super obvious why the driver sometimes uses an ERR_PTR for the
current mrq. Explain why in comments.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240305105623.3379-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Since driver doesn't handle any DMA requests, drop any use of DMA bits,
such as DMA direction. Instead, use MMC_DATA_WRITE flag directly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304184830.1319526-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240304175606.1200076-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add support for Hi3798MV200 specific extension.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-5-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add binding and an extra property for Hi3798MV200 DWMMC specific extension.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-4-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
convert the legacy txt binding to modern YAML and rename to
hisilicon,hi3798cv200-dw-mshc.yaml. No semantic change.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-3-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The alias is not used and should be removed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-2-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Parsing dt usually happens very early, sometimes even before the struct
mmc_host has been allocated (e.g. dw_mci_probe() and dw_mci_parse_dt() in
dw_mmc.c). Looking at the source of mmc_of_parse_clk_phase(), it's actually
not needed to have an initialized mmc_host, let's therefore pass a struct
device* to it instead.
Also update the only current user, sdhci-of-aspeed.
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-1-10c03f316285@outlook.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
function
This looks strange to call release_mem_region() in a remove function
without any request_mem_region() in the probe or "struct resource"
somewhere.
So remove the corresponding code.
Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
With the to-be-fixed commit, the reset_work handler cleared 'host->mrq'
outside of the spinlock protected critical section. That leaves a small
race window during execution of 'tmio_mmc_reset()' where the done_work
handler could grab a pointer to the now invalid 'host->mrq'. Both would
use it to call mmc_request_done() causing problems (see link below).
However, 'host->mrq' cannot simply be cleared earlier inside the
critical section. That would allow new mrqs to come in asynchronously
while the actual reset of the controller still needs to be done. So,
like 'tmio_mmc_set_ios()', an ERR_PTR is used to prevent new mrqs from
coming in but still avoiding concurrency between work handlers.
Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Closes: https://lore.kernel.org/all/20240220061356.3001761-1-dirk.behme@de.bosch.com/
Fixes: df3ef2d3c92c ("mmc: protect the tmio_mmc driver against a theoretical race")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Cc: stable@vger.kernel.org # 3.0+
Link: https://lore.kernel.org/r/20240305104423.3177-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When driver uses pm_runtime_force_suspend() as the system suspend callback
function and registers the wake irq with reverse enable ordering, the wake
irq will be re-enabled when entering system suspend, triggering an
'Unbalanced enable for IRQ xxx' warning. In this scenario, the call
sequence during system suspend is as follows:
suspend_devices_and_enter()
-> dpm_suspend_start()
-> dpm_run_callback()
-> pm_runtime_force_suspend()
-> dev_pm_enable_wake_irq_check()
-> dev_pm_enable_wake_irq_complete()
-> suspend_enter()
-> dpm_suspend_noirq()
-> device_wakeup_arm_wake_irqs()
-> dev_pm_arm_wake_irq()
To fix this issue, complete the setting of WAKE_IRQ_DEDICATED_ENABLED flag
in dev_pm_enable_wake_irq_complete() to avoid redundant irq enablement.
Fixes: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Qingliang Li <qingliang.li@mediatek.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Cc: 5.16+ <stable@vger.kernel.org> # 5.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
says:
====================
MT7530 DSA Subdriver Improvements Act III
This is the third patch series with the goal of simplifying the MT7530 DSA
subdriver and improving support for MT7530, MT7531, and the switch on the
MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
Changes in v3:
- Patch 8
- Explain properly the behaviour of setting link down on all ports at
setup.
- Split the changes for simplifying the link settings operations out to
another patch.
- Link to v2: https://lore.kernel.org/r/20240216-for-netnext-mt7530-improvements-3-v2-0-094cae3ff23b@arinc9.com
Changes in v2:
- Patch 8
- Use a single mt7530_rmw() instead of two mt7530_clear() and
mt7530_set() commands.
- Link to v1: https://lore.kernel.org/r/20240208-for-netnext-mt7530-improvements-3-v1-0-d7c1cfd502ca@arinc9.com
====================
Link: https://lore.kernel.org/r/20240301-for-netnext-mt7530-improvements-3-v3-0-449f4f166454@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The "MT7621 Giga Switch Programming Guide v0.3", "MT7531 Reference Manual
for Development Board v1.0", and "MT7988A Wi-Fi 7 Generation Router
Platform: Datasheet (Open Version) v0.1" documents show that these bits are
enabled at reset:
PMCR_IFG_XMIT(1) (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_MAC_MODE (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_TX_EN
PMCR_RX_EN
PMCR_BACKOFF_EN (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_BACKPR_EN (not part of PMCR_LINK_SETTINGS_MASK)
PMCR_TX_FC_EN
PMCR_RX_FC_EN
These bits also don't exist on the MT7530_PMCR_P(6) register of the switch
on the MT7988 SoC:
PMCR_IFG_XMIT()
PMCR_MAC_MODE
PMCR_BACKOFF_EN
PMCR_BACKPR_EN
Remove the setting of the bits not part of PMCR_LINK_SETTINGS_MASK on
phylink_mac_config as they're already set.
The bit for setting the port on force mode is already done on
mt7530_setup() and mt7531_setup_common(). So get rid of
PMCR_FORCE_MODE_ID() which helped determine which bit to use for the switch
model.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
port_enable and port_disable clears the link settings. Move that to
mt7530_setup() and mt7531_setup_common() which set up the switches. This
way, the link settings are cleared on all ports at setup, and then only
once with phylink_mac_link_down() when a link goes down.
Enable force mode at setup to apply the force part of the link settings.
This ensures that disabled ports will have their link down.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The commit fae463084032 ("net: dsa: mt753x: fix pcs conversion regression")
fixes regression caused by cpu_port_config manually calling phylink
operations. cpu_port_config was deemed useless and was removed. Therefore,
put initialising PCS devices code back to its original order.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no need for a separate function to call
priv->info->mac_port_config(). Call it from mt753x_phylink_mac_config()
instead and remove mt753x_mac_config().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
priv->info->cpu_port_config() is used for MT7531 and the switch on the
MT7988 SoC. It sets up the ports described as a CPU port earlier than the
phylink code path would do.
This function is useless as:
- Configuring the MACs can be done from the phylink_mac_config code path
instead.
- All the link configuration it does on the CPU ports are later undone with
the port_enable, phylink_mac_config, and then phylink_mac_link_up code
path [1].
priv->p5_interface and priv->p6_interface were being used to prevent
configuring the MACs from the phylink_mac_config code path. Remove them now
that they hold no purpose.
Remove priv->info->cpu_port_config(). On mt753x_phylink_mac_config, switch
to if statements to simplify the code.
Remove the overwriting of the speed and duplex interfaces for certain
interface modes. Phylink already provides the speed and duplex variables
with proper values. Phylink already sets the max speed of TRGMII to
SPEED_1000. Add SPEED_2500 for PHY_INTERFACE_MODE_2500BASEX to where the
speed and EEE bits are set instead.
On the switch on the MT7988 SoC, PHY_INTERFACE_MODE_INTERNAL is being used
to describe the interface mode of the 10G MAC, which is of port 6. On
mt7988_cpu_port_config() PMCR_FORCE_SPEED_1000 was set via the
PMCR_CPU_PORT_SETTING() mask. Add SPEED_10000 case to where the speed bits
are set to cover this. No need to add it to where the EEE bits are set as
the "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows that these bits don't exist on the MT7530_PMCR_P(6)
register.
Remove the definition of PMCR_CPU_PORT_SETTING() now that it holds no
purpose.
Change mt753x_cpu_port_enable() to void now that there're no error cases
left.
Link: https://lore.kernel.org/netdev/ZHy2jQLesdYFMQtO@shell.armlinux.org.uk/ [1]
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Remove error returns on the cases where they are already handled with the
function the mac_port_get_caps member in mt753x_table points to.
mt7531_mac_config() is also called from mt7531_cpu_port_config() outside of
phylink but the port and interface modes are already handled there.
Change the functions and the mac_port_config function pointer to void now
that there're no error returns anymore.
Remove mt753x_is_mac_port() that used to help the said error returns.
On mt7531_mac_config(), switch to if statements to simplify the code.
Remove internal phy cases from mt753x_phylink_mac_config(), there is no
need to check the interface mode as that's already handled with the
function the mac_port_get_caps member in mt753x_table points to.
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to the document MT7531 Reference Manual for Development Board
v1.0, the SW_PHY_RST bit on the SYS_CTRL register doesn't exist for
MT7531. This is likely why forcing link down on all ports is necessary for
MT7531.
Therefore, do not set SW_PHY_RST on mt7531_setup().
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Setting this register related to interrupts is only needed for the MT7530
switch. Make an exclusive check to ensure this.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For the switch on the MT7988 SoC, the mac_port_config member for ID_MT7988
in mt753x_table is not needed as the interfaces of all MACs are already
handled on mt7988_mac_port_get_caps().
Therefore, remove the mac_port_config member from ID_MT7988 in
mt753x_table. Before calling priv->info->mac_port_config(), if there's no
mac_port_config member in mt753x_table, exit mt753x_mac_config()
successfully.
Remove calling priv->info->mac_port_config() from the sanity check as the
sanity check requires a pointer to a mac_port_config function to be
non-NULL. This will fail for MT7988 as mac_port_config won't be a member of
its info table.
Co-developed-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Yunsheng Lin says:
====================
remove page frag implementation in vhost_net
Currently there are three implementations for page frag:
1. mm/page_alloc.c: net stack seems to be using it in the
rx part with 'struct page_frag_cache' and the main API
being page_frag_alloc_align().
2. net/core/sock.c: net stack seems to be using it in the
tx part with 'struct page_frag' and the main API being
skb_page_frag_refill().
3. drivers/vhost/net.c: vhost seems to be using it to build
xdp frame, and it's implementation seems to be a mix of
the above two.
This patchset tries to unfiy the page frag implementation a
little bit by unifying gfp bit for order 3 page allocation
and replacing page frag implementation in vhost.c with the
one in page_alloc.c.
After this patchset, we are not only able to unify the page
frag implementation a little, but also able to have about
0.5% performance boost testing by using the vhost_net_test
introduced in the last patch.
Before this patchset:
Performance counter stats for './vhost_net_test' (10 runs):
305325.78 msec task-clock # 1.738 CPUs utilized ( +- 0.12% )
1048668 context-switches # 3.435 K/sec ( +- 0.00% )
11 cpu-migrations # 0.036 /sec ( +- 17.64% )
33 page-faults # 0.108 /sec ( +- 0.49% )
244651819491 cycles # 0.801 GHz ( +- 0.43% ) (64)
64714638024 stalled-cycles-frontend # 26.45% frontend cycles idle ( +- 2.19% ) (67)
30774313491 stalled-cycles-backend # 12.58% backend cycles idle ( +- 7.68% ) (70)
201749748680 instructions # 0.82 insn per cycle
# 0.32 stalled cycles per insn ( +- 0.41% ) (66.76%)
65494787909 branches # 214.508 M/sec ( +- 0.35% ) (64)
4284111313 branch-misses # 6.54% of all branches ( +- 0.45% ) (66)
175.699 +- 0.189 seconds time elapsed ( +- 0.11% )
After this patchset:
Performance counter stats for './vhost_net_test' (10 runs):
303974.38 msec task-clock # 1.739 CPUs utilized ( +- 0.14% )
1048807 context-switches # 3.450 K/sec ( +- 0.00% )
14 cpu-migrations # 0.046 /sec ( +- 12.86% )
33 page-faults # 0.109 /sec ( +- 0.46% )
251289376347 cycles # 0.827 GHz ( +- 0.32% ) (60)
67885175415 stalled-cycles-frontend # 27.01% frontend cycles idle ( +- 0.48% ) (63)
27809282600 stalled-cycles-backend # 11.07% backend cycles idle ( +- 0.36% ) (71)
195543234672 instructions # 0.78 insn per cycle
# 0.35 stalled cycles per insn ( +- 0.29% ) (69.04%)
62423183552 branches # 205.357 M/sec ( +- 0.48% ) (67)
4135666632 branch-misses # 6.63% of all branches ( +- 0.63% ) (67)
174.764 +- 0.214 seconds time elapsed ( +- 0.12% )
Changelog:
V6: Add timeout for poll() and simplify some logic as suggested
by Jason.
V5: Address the comment from jason in vhost_net_test.c and the
comment about leaving out the gfp change for page frag in
sock.c as suggested by Paolo.
V4: Resend based on latest net-next branch.
V3:
1. Add __page_frag_alloc_align() which is passed with the align mask
the original function expected as suggested by Alexander.
2. Drop patch 3 in v2 suggested by Alexander.
3. Reorder patch 4 & 5 in v2 suggested by Alexander.
Note that placing this gfp flags handing for order 3 page in an inline
function is not considered, as we may be able to unify the page_frag
and page_frag_cache handling.
V2: Change 'xor'd' to 'masked off', add vhost tx testing for
vhost_net_test.
V1: Fix some typo, drop RFC tag and rebase on latest net-next.
====================
Link: https://lore.kernel.org/r/20240228093013.8263-1-linyunsheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
introduce vhost_net_test for both vhost_net tx and rx basing
on virtio_test to test vhost_net changing in the kernel.
Steps for vhost_net tx testing:
1. Prepare a out buf.
2. Kick the vhost_net to do tx processing.
3. Do the receiving in the tun side.
4. verify the data received by tun is correct.
Steps for vhost_net rx testing:
1. Prepare a in buf.
2. Do the sending in the tun side.
3. Kick the vhost_net to do rx processing.
4. verify the data received by vhost_net is correct.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The page frag in vhost_net_page_frag_refill() uses the
'struct page_frag' from skb_page_frag_refill(), but it's
implementation is similar to page_frag_alloc_align() now.
This patch removes vhost_net_page_frag_refill() by using
'struct page_frag_cache' instead of 'struct page_frag',
and allocating frag using page_frag_alloc_align().
The added benefit is that not only unifying the page frag
implementation a little, but also having about 0.5% performance
boost testing by using the vhost_net_test introduced in the
last patch.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When draining a page_frag_cache, most user are doing
the similar steps, so introduce an API to avoid code
duplication.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently there seems to be three page frag implementations
which all try to allocate order 3 page, if that fails, it
then fail back to allocate order 0 page, and each of them
all allow order 3 page allocation to fail under certain
condition by using specific gfp bits.
The gfp bits for order 3 page allocation are different
between different implementation, __GFP_NOMEMALLOC is
or'd to forbid access to emergency reserves memory for
__page_frag_cache_refill(), but it is not or'd in other
implementions, __GFP_DIRECT_RECLAIM is masked off to avoid
direct reclaim in vhost_net_page_frag_refill(), but it is
not masked off in __page_frag_cache_refill().
This patch unifies the gfp bits used between different
implementions by or'ing __GFP_NOMEMALLOC and masking off
__GFP_DIRECT_RECLAIM for order 3 page allocation to avoid
possible pressure for mm.
Leave the gfp unifying for page frag implementation in sock.c
for now as suggested by Paolo Abeni.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
napi_alloc_frag_align() and netdev_alloc_frag_align() accept
align as an argument, and they are thin wrappers around the
__napi_alloc_frag_align() and __netdev_alloc_frag_align() APIs
doing the alignment checking and align mask conversion, in order
to call page_frag_alloc_align() directly. The intention here is
to keep the alignment checking and the alignmask conversion in
in-line wrapper to avoid those kind of operations during execution
time since it can usually be handled during compile time.
We are going to use page_frag_alloc_align() in vhost_net.c, it
need the same kind of alignment checking and alignmask conversion,
so split up page_frag_alloc_align into an inline wrapper doing the
above operation, and add __page_frag_alloc_align() which is passed
with the align mask the original function expected as suggested by
Alexander.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
CC: Alexander Duyck <alexander.duyck@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GPIO EOI is not set to clear interrupt status after handling the
interrupt. It should be done in irq_chip->irq_ack, but this function
is not called in handle_nested_irq(). So executing function
txgbe_gpio_irq_ack() manually in txgbe_gpio_irq_handler().
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The register of GPIO interrupt status is masked before MAC IRQ
is enabled. This is because of hardware deficiency. So manually
clear the interrupt status before using them. Otherwise, GPIO
interrupts will never be reported again. There is a workaround for
clearing interrupts to set GPIO EOI in txgbe_up_complete().
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://lore.kernel.org/r/20240301092956.18544-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The PARTIAL_NODE slab_state has gone with SLAB removed, so just
remove it.
Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Convert test-string_helpers.c to KUnit so it can be easily run with
everything else.
Failure reporting doesn't need to be open-coded in most places, for
example, forcing a failure in the expected output for upper/lower
testing looks like this:
[12:18:43] # test_upper_lower: EXPECTATION FAILED at lib/string_helpers_kunit.c:579
[12:18:43] Expected dst == strings_upper[i].out, but
[12:18:43] dst == "ABCDEFGH1234567890TEST"
[12:18:43] strings_upper[i].out == "ABCDEFGH1234567890TeST"
[12:18:43] [FAILED] test_upper_lower
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string_helpers
...
[12:23:55] Starting KUnit Kernel (1/1)...
[12:23:55] ============================================================
[12:23:55] =============== string_helpers (3 subtests) ================
[12:23:55] [PASSED] test_get_size
[12:23:55] [PASSED] test_upper_lower
[12:23:55] [PASSED] test_unescape
[12:23:55] ================= [PASSED] string_helpers ==================
[12:23:55] ============================================================
[12:23:55] Testing complete. Ran 3 tests: passed: 3
[12:23:55] Elapsed time: 6.709s total, 0.001s configuring, 6.591s building, 0.066s running
Link: https://lore.kernel.org/r/20240301202732.2688342-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Convert test_string.c to KUnit so it can be easily run with everything
else.
Additional text context is retained for failure reporting. For example,
when forcing a bad match, we can see the loop counters reported for the
memset() tests:
[09:21:52] # test_memset64: ASSERTION FAILED at lib/string_kunit.c:93
[09:21:52] Expected v == 0xa2a1a1a1a1a1a1a1ULL, but
[09:21:52] v == -6799976246779207263 (0xa1a1a1a1a1a1a1a1)
[09:21:52] 0xa2a1a1a1a1a1a1a1ULL == -6727918652741279327 (0xa2a1a1a1a1a1a1a1)
[09:21:52] i:0 j:0 k:0
[09:21:52] [FAILED] test_memset64
Currently passes without problems:
$ ./tools/testing/kunit/kunit.py run string
...
[09:37:40] Starting KUnit Kernel (1/1)...
[09:37:40] ============================================================
[09:37:40] =================== string (6 subtests) ====================
[09:37:40] [PASSED] test_memset16
[09:37:40] [PASSED] test_memset32
[09:37:40] [PASSED] test_memset64
[09:37:40] [PASSED] test_strchr
[09:37:40] [PASSED] test_strnchr
[09:37:40] [PASSED] test_strspn
[09:37:40] ===================== [PASSED] string ======================
[09:37:40] ============================================================
[09:37:40] Testing complete. Ran 6 tests: passed: 6
[09:37:40] Elapsed time: 6.730s total, 0.001s configuring, 6.562s building, 0.131s running
Link: https://lore.kernel.org/r/20240301202732.2688342-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
In packet offload, packets are not encrypted in XFRM stack, so
the next network layer which the packets will be forwarded to
should depend on where the packet came from (either xfrm4_output
or xfrm6_output) rather than the matched SA's family type.
Test: verified IPv6-in-IPv4 packets on Android device with
IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In current code, xfrm_bundle_create() always uses the matched
SA's family type to look up a xfrm child route for the skb.
The route returned by xfrm_dst_lookup() will eventually be
used in xfrm_output_resume() (skb_dst(skb)->ops->local_out()).
If packet offload is used, the above behavior can lead to
calling ip_local_out() for an IPv6 packet or calling
ip6_local_out() for an IPv4 packet, which is likely to fail.
This change fixes the behavior by checking if the matched SA
has packet offload enabled. If not, keep the same behavior;
if yes, use the matched SP's family type for the lookup.
Test: verified IPv6-in-IPv4 packets on Android device with
IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The first kiocb_set_cancel_fn() argument may point at a struct kiocb
that is not embedded inside struct aio_kiocb. With the current code,
depending on the compiler, the req->ki_ctx read happens either before
the IOCB_AIO_RW test or after that test. Move the req->ki_ctx read such
that it is guaranteed that the IOCB_AIO_RW test happens first.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Cc: Benjamin LaHaise <ben@communityfibre.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Fixes: b820de741ae4 ("fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240304235715.3790858-1-bvanassche@acm.org
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The icl+ power well code currently assumes that every AUX power
well maps to an encoder which is using said power well. That is
by no menas guaranteed as we:
- only register encoders for ports declared in the VBT
- combo PHY HDMI-only encoder no longer get an AUX CH since
commit 9856308c94ca ("drm/i915: Only populate aux_ch if really needed")
However we have places such as intel_power_domains_sanitize_state()
that blindly traverse all the possible power wells. So these bits
of code may very well encounbter an aux power well with no associated
encoder.
In this particular case the BIOS seems to have left one AUX power
well enabled even though we're dealing with a HDMI only encoder
on a combo PHY. We then proceed to turn off said power well and
explode when we can't find a matching encoder. As a short term fix
we should be able to just skip the PHY related parts of the power
well programming since we know this situation can only happen with
combo PHYs.
Another option might be to go back to always picking an AUX CH for
all encoders. However I'm a bit wary about that since we might in
theory end up conflicting with the VBT AUX CH assignment. Also
that wouldn't help with encoders not declared in the VBT, should
we ever need to poke the corresponding power wells.
Longer term we need to figure out what the actual relationship
is between the PHY vs. AUX CH vs. AUX power well. Currently this
is entirely unclear.
Cc: stable@vger.kernel.org
Fixes: 9856308c94ca ("drm/i915: Only populate aux_ch if really needed")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10184
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 6a8c66bf0e565c34ad0a18f820e0bb17951f7f91)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
On the error path, assign -ENOMEM to ret when memory allocation of
"dev->prev_data" fails.
Fixes: e70961505808 ("platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240226144011.2100804-1-harshit.m.mogalapalli@oracle.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB
devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2.
But the current p2sb code tries to cache BAR0 info for all of
devfn 13,0 to 13,7 . This involves calling pci_scan_single_device()
for device 13 functions 0-7 and the hw does not seem to like
pci_scan_single_device() getting called for some of the other hidden
devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous
ACPI errors leading to high CPU usage.
Fix this by only caching BAR0 info and thus only calling
pci_scan_single_device() for the P2SB and the SPI controller.
Fixes: 5913320eb0b3 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reported-by: Danil Rybakov <danilrybakov249@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218531
Tested-by: Danil Rybakov <danilrybakov249@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240304134356.305375-2-hdegoede@redhat.com
|
|
The HP EliteBook using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240304134033.773348-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Patch "fs/aio: Make io_cancel() generate completions again" is based on the
assumption that calling kiocb->ki_cancel() does not complete R/W requests.
This is incorrect: the two drivers that call kiocb_set_cancel_fn() callers
set a cancellation function that calls usb_ep_dequeue(). According to its
documentation, usb_ep_dequeue() calls the completion routine with status
-ECONNRESET. Hence this revert.
Cc: Benjamin LaHaise <ben@communityfibre.ca>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Reported-by: syzbot+b91eb2ed18f599dd3c31@syzkaller.appspotmail.com
Fixes: 54cbc058d86b ("fs/aio: Make io_cancel() generate completions again")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240304182945.3646109-1-bvanassche@acm.org
Acked-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes
- Fix to extract HDCP information from primary connector
- Check for NULL mmu_interval_notifier before removing
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZeGOUTfiA0_FNKLg@jlahtine-mobl.ger.corp.intel.com
|
