| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.9-2024-03-08-1:
amdgpu:
- DCN 3.5.1 support
- Fixes for IOMMUv2 removal
- UAF fix
- Misc small fixes and cleanups
- SR-IOV fixes
- MCBP cleanup
- devcoredump update
- NBIF 6.3.1 support
- VPE 6.1.1 support
amdkfd:
- Misc fixes and cleanups
- GFX10.1 trap fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308170741.3691166-1-alexander.deucher@amd.com
|
|
From 2.47 to 2.48
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Unify compression headers (chained and unchained) into a single struct
so we can use it for the initial compression transform header
interchangeably.
Also make the OriginalPayloadSize field to be always visible in the
compression payload header, and have callers subtract its size when not
needed.
Rename the related structs to match the naming convetion used in the
other SMB2 structs.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
See protocol documentation in MS-SMB2 section 2.2.42.2.2
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Change "compress=" mount option to a boolean flag, that, if set,
will enable negotiating compression algorithms with the server.
Do not de/compress anything for now.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It can be helpful in debugging to know which ioctls are called to better
correlate them with smb3 fsctls (and opens). Add a dynamic trace point
to trace ioctls into cifs.ko
Here is sample output:
TASK-PID CPU# ||||| TIMESTAMP FUNCTION
| | | ||||| | |
new-inotify-ioc-90418 [001] ..... 142157.397024: smb3_ioctl: xid=18 fid=0x0 ioctl cmd=0xc009cf0b
new-inotify-ioc-90457 [007] ..... 142217.943569: smb3_ioctl: xid=22 fid=0x389bf5b6 ioctl cmd=0xc009cf0b
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs writeback doesn't correctly handle the case where
cifs_extend_writeback() hits a point where it is considering an additional
folio, but this would overrun the wsize - at which point it drops out of
the xarray scanning loop and calls xas_pause(). The problem is that
xas_pause() advances the loop counter - thereby skipping that page.
What needs to happen is for xas_reset() to be called any time we decide we
don't want to process the page we're looking at, but rather send the
request we are building and start a new one.
Fix this by copying and adapting the netfslib writepages code as a
temporary measure, with cifs writeback intending to be offloaded to
netfslib in the near future.
This also fixes the issue with the use of filemap_get_folios_tag() causing
retry of a bunch of pages which the extender already dealt with.
This can be tested by creating, say, a 64K file somewhere not on cifs
(otherwise copy-offload may get underfoot), mounting a cifs share with a
wsize of 64000, copying the file to it and then comparing the original file
and the copy:
dd if=/dev/urandom of=/tmp/64K bs=64k count=1
mount //192.168.6.1/test /mnt -o user=...,pass=...,wsize=64000
cp /tmp/64K /mnt/64K
cmp /tmp/64K /mnt/64K
Without the fix, the cmp fails at position 64000 (or shortly thereafter).
Fixes: d08089f649a0 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: samba-technical@lists.samba.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add support for returning reparse mount option in /proc/mounts.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402262152.YZOwDlCM-lkp@intel.com/
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Set correct dirent->d_type for IO_REPARSE_TAG_DFS{,R} and
IO_REPARSE_TAG_MOUNT_POINT reparse points.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse the extended attributes from WSL reparse points to correctly
report uid, gid mode and dev from ther instantiated inodes.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add a new command to smb2_compound_op() for querying WSL extended
attributes from reparse points.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This was intended to be an IS_ERR() check. The ea_create_context()
function doesn't return NULL.
Fixes: 1eab17fe485c ("smb: client: add support for WSL reparse points")
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add support for creating special files via WSL reparse points when
using 'reparse=wsl' mount option. They're faster than NFS reparse
points because they don't require extra roundtrips to figure out what
->d_type a specific dirent is as such information is already stored in
query dir responses and then making getdents() calls faster.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Replace @desired_access, @create_disposition, @create_options and
@mode parameters with a single @oparms.
No functional changes.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Now that smb2_compound_op() can accept up to 5 commands in a single
compound request, set the appropriate NextCommand and related flags to
all subsequent commands as well as handling the case where a valid
@cfile is passed and therefore skipping create and close requests in
the compound chain.
This fix a potential broken compound request that could be sent from
smb2_get_reparse_inode() if the client found a valid open
file (@cfile) prior to calling smb2_compound_op().
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In preparation to add support for creating special files also via WSL
reparse points in next commits.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Allow the user to create special files and symlinks by choosing
between WSL and NFS reparse points via 'reparse={nfs,wsl}' mount
options. If unset or 'reparse=default', the client will default to
creating them via NFS reparse points.
Creating WSL reparse points isn't supported yet, so simply return
error when attempting to mount with 'reparse=wsl' for now.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There is a shortcoming in the current implementation of the file
lease mechanism exposed when the lease keys were attempted to be
reused for unlink, rename and set_path_size operations for a client. As
per MS-SMB2, lease keys are associated with the file name. Linux smb
client maintains lease keys with the inode. If the file has any hardlinks,
it is possible that the lease for a file be wrongly reused for an
operation on the hardlink or vice versa. In these cases, the mentioned
compound operations fail with STATUS_INVALID_PARAMETER.
This patch adds a fallback to the old mechanism of not sending any
lease with these compound operations if the request with lease key fails
with STATUS_INVALID_PARAMETER.
Resending the same request without lease key should not hurt any
functionality, but might impact performance especially in cases where
the error is not because of the usage of wrong lease key and we might
end up doing an extra roundtrip.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
When a file/dentry has been deleted before closing all its open
handles, currently, closing them can add them to the deferred
close list. This can lead to problems in creating file with the
same name when the file is re-created before the deferred close
completes. This issue was seen while reusing a client's already
existing lease on a file for compound operations and xfstest 591
failed because of the deferred close handle that remained valid
even after the file was deleted and was being reused to create a
file with the same name. The server in this case returns an error
on open with STATUS_DELETE_PENDING. Recreating the file would
fail till the deferred handles are closed (duration specified in
closetimeo).
This patch fixes the issue by flagging all open handles for the
deleted file (file path to be precise) by setting
status_file_deleted to true in the cifsFileInfo structure. As per
the information classes specified in MS-FSCC, SMB2 query info
response from the server has a DeletePending field, set to true
to indicate that deletion has been requested on that file. If
this is the case, flag the open handles for this file too.
When doing close in cifs_close for each of these handles, check the
value of this boolean field and do not defer close these handles
if the corresponding filepath has been deleted.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Currently, when a rename, unlink or set path size compound operation
is requested on a file that has a lot of dirty pages to be written
to the server, we do not send the lease key for these requests. As a
result, the server can assume that this request is from a new client, and
send a lease break notification to the same client, on the same
connection. As a response to the lease break, the client can consume
several credits to write the dirty pages to the server. Depending on the
server's credit grant implementation, the server can stop granting more
credits to this connection, and this can cause a deadlock (which can only
be resolved when the lease timer on the server expires).
One of the problems here is that the client is sending no lease key,
even if it has a lease for the file. This patch fixes the problem by
reusing the existing lease key on the file for rename, unlink and set path
size compound operations so that the client does not break its own lease.
A very trivial example could be a set of commands by a client that
maintains open handle (for write) to a file and then tries to copy the
contents of that file to another one, eg.,
tail -f /dev/null > myfile &
mv myfile myfile2
Presently, the network capture on the client shows that the move (or
rename) would trigger a lease break on the same client, for the same file.
With the lease key reused, the lease break request-response overhead is
eliminated, thereby reducing the roundtrips performed for this set of
operations.
The patch fixes the bug described above and also provides perf benefit.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Changes to allocation size are approximated for extending writes of cached
files until the server returns the actual value (on SMB3 close or query info
for example), but it was setting the estimated value for number of blocks
to larger than the file size even if the file is likely sparse which
breaks various xfstests (e.g. generic/129, 130, 221, 228).
When i_size and i_blocks are updated in write completion do not increase
allocation size more than what was written (rounded up to 512 bytes).
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add Bharath for reviewing deferred close and leases
Acked-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove
its usage so we can delete it from slab. No functional change.
Link: https://lore.kernel.org/all/20240223-slab-cleanup-flags-v2-0-02f1753e8303@suse.cz/
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
There are cases where a session is disconnected and password has changed
on the server (or expired) for this user and this currently can not
be fixed without unmount and mounting again. This patch allows
remount to change the password (for the non Kerberos case, Kerberos
ticket refresh is handled differently) when the session is disconnected
and the user can not reconnect due to still using old password.
Future patches should also allow us to setup the keyring (cifscreds)
to have an "alternate password" so we would be able to change
the password before the session drops (without the risk of races
between when the password changes and the disconnect occurs -
ie cases where the old password is still needed because the new
password has not fully rolled out to all servers yet).
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
In cases of large directories, the readdir operation may span multiple
round trips to retrieve contents. This introduces a potential race
condition in case of concurrent write and readdir operations. If the
readdir operation initiates before a write has been processed by the
server, it may update the file size attribute to an older value.
Address this issue by avoiding file size updates from readdir when we
have read/write lease.
Scenario:
1) process1: open dir xyz
2) process1: readdir instance 1 on xyz
3) process2: create file.txt for write
4) process2: write x bytes to file.txt
5) process2: close file.txt
6) process2: open file.txt for read
7) process1: readdir 2 - overwrites file.txt inode size to 0
8) process2: read contents of file.txt - bug, short read with 0 bytes
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add i.MX95 Generic/ELE/V2X MU support, its register layout is same as
i.MX8ULP, but the Parameter registers would show different
TR/RR. Since the driver already supports get TR/RR from Parameter
registers, not hardcoding the number, this patch just add
the compatible entry to reuse i.MX8ULP S4 cfg data.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Some MUs such as i.MX95 MU, have internal SRAM which could be used
for SCMI shared memory, so populate the sub-nodes to use the SRAM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
i.MX8ULP, i.MX93 MU has a Parameter register encoded as below:
BIT: 15 --- 8 | 7 --- 0
RR_NUM TR_NUM
So to make driver easy to support more variants, get the RR/TR
registers number from Parameter register.
The patch only adds support the specific MU, such as ELE MU.
For generic MU, not add support for number larger than 4.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
There will be changes that init may fail, so adding return value for
init function.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Add i.MX95 Generic, Secure Enclave and V2X Message Unit compatible string.
And the MUs in AONMIX has internal RAMs for SCMI shared buffer usage.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
|
|
A user reported that on this machine, disabling BIOS fan control
is necessary in order to change the fan speed.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240309212025.13758-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Do not allow large strings (> 4096) as single write to trace_marker
The size of a string written into trace_marker was determined by the
size of the sub-buffer in the ring buffer. That size is dependent on
the PAGE_SIZE of the architecture as it can be mapped into user
space. But on PowerPC, where PAGE_SIZE is 64K, that made the limit of
the string of writing into trace_marker 64K.
One of the selftests looks at the size of the ring buffer sub-buffers
and writes that plus more into the trace_marker. The write will take
what it can and report back what it consumed so that the user space
application (like echo) will write the rest of the string. The string
is stored in the ring buffer and can be read via the "trace" or
"trace_pipe" files.
The reading of the ring buffer uses vsnprintf(), which uses a
precision "%.*s" to make sure it only reads what is stored in the
buffer, as a bug could cause the string to be non terminated.
With the combination of the precision change and the PAGE_SIZE of 64K
allowing huge strings to be added into the ring buffer, plus the test
that would actually stress that limit, a bug was reported that the
precision used was too big for "%.*s" as the string was close to 64K
in size and the max precision of vsnprintf is 32K.
Linus suggested not to have that precision as it could hide a bug if
the string was again stored without a nul byte.
Another issue that was brought up is that the trace_seq buffer is
also based on PAGE_SIZE even though it is not tied to the
architecture limit like the ring buffer sub-buffer is. Having it be
64K * 2 is simply just too big and wasting memory on systems with 64K
page sizes. It is now hardcoded to 8K which is what all other
architectures with 4K PAGE_SIZE has.
Finally, the write to trace_marker is now limited to 4K as there is
no reason to write larger strings into trace_marker.
- ring_buffer_wait() should not loop.
The ring_buffer_wait() does not have the full context (yet) on if it
should loop or not. Just exit the loop as soon as its woken up and
let the callers decide to loop or not (they already do, so it's a bit
redundant).
- Fix shortest_full field to be the smallest amount in the ring buffer
that a waiter is waiting for. The "shortest_full" field is updated
when a new waiter comes in and wants to wait for a smaller amount of
data in the ring buffer than other waiters. But after all waiters are
woken up, it's not reset, so if another waiter comes in wanting to
wait for more data, it will be woken up when the ring buffer has a
smaller amount from what the previous waiters were waiting for.
- The wake up all waiters on close is incorrectly called frome
.release() and not from .flush() so it will never wake up any waiters
as the .release() will not get called until all .read() calls are
finished. And the wakeup is for the waiters in those .read() calls.
* tag 'trace-ring-buffer-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use .flush() call to wake up readers
ring-buffer: Fix resetting of shortest_full
ring-buffer: Fix waking up ring buffer readers
tracing: Limit trace_marker writes to just 4K
tracing: Limit trace_seq size to just 8K and not depend on architecture PAGE_SIZE
tracing: Remove precision vsnprintf() check from print event
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer after having
registered child devices to avoid triggering a probe deferral loop.
This fixes internal display on Lenovo ThinkPad X13s
* tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-combo: fix type-c switch registration
phy: qcom-qmp-combo: fix drm bridge registration
|
|
The .release() function does not get called until all readers of a file
descriptor are finished.
If a thread is blocked on reading a file descriptor in ring_buffer_wait(),
and another thread closes the file descriptor, it will not wake up the
other thread as ring_buffer_wake_waiters() is called by .release(), and
that will not get called until the .read() is finished.
The issue originally showed up in trace-cmd, but the readers are actually
other processes with their own file descriptors. So calling close() would wake
up the other tasks because they are blocked on another descriptor then the
one that was closed(). But there's other wake ups that solve that issue.
When a thread is blocked on a read, it can still hang even when another
thread closed its descriptor.
This is what the .flush() callback is for. Have the .flush() wake up the
readers.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202432.107909457@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: f3ddb74ad0790 ("tracing: Wake up ring buffer waiters on closing of the file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The "shortest_full" variable is used to keep track of the waiter that is
waiting for the smallest amount on the ring buffer before being woken up.
When a tasks waits on the ring buffer, it passes in a "full" value that is
a percentage. 0 means wake up on any data. 1-100 means wake up from 1% to
100% full buffer.
As all waiters are on the same wait queue, the wake up happens for the
waiter with the smallest percentage.
The problem is that the smallest_full on the cpu_buffer that stores the
smallest amount doesn't get reset when all the waiters are woken up. It
does get reset when the ring buffer is reset (echo > /sys/kernel/tracing/trace).
This means that tasks may be woken up more often then when they want to
be. Instead, have the shortest_full field get reset just before waking up
all the tasks. If the tasks wait again, they will update the shortest_full
before sleeping.
Also add locking around setting of shortest_full in the poll logic, and
change "work" to "rbwork" to match the variable name for rb_irq_work
structures that are used in other places.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.948914369@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: 2c2b0a78b3739 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
|
|
A task can wait on a ring buffer for when it fills up to a specific
watermark. The writer will check the minimum watermark that waiters are
waiting for and if the ring buffer is past that, it will wake up all the
waiters.
The waiters are in a wait loop, and will first check if a signal is
pending and then check if the ring buffer is at the desired level where it
should break out of the loop.
If a file that uses a ring buffer closes, and there's threads waiting on
the ring buffer, it needs to wake up those threads. To do this, a
"wait_index" was used.
Before entering the wait loop, the waiter will read the wait_index. On
wakeup, it will check if the wait_index is different than when it entered
the loop, and will exit the loop if it is. The waker will only need to
update the wait_index before waking up the waiters.
This had a couple of bugs. One trivial one and one broken by design.
The trivial bug was that the waiter checked the wait_index after the
schedule() call. It had to be checked between the prepare_to_wait() and
the schedule() which it was not.
The main bug is that the first check to set the default wait_index will
always be outside the prepare_to_wait() and the schedule(). That's because
the ring_buffer_wait() doesn't have enough context to know if it should
break out of the loop.
The loop itself is not needed, because all the callers to the
ring_buffer_wait() also has their own loop, as the callers have a better
sense of what the context is to decide whether to break out of the loop
or not.
Just have the ring_buffer_wait() block once, and if it gets woken up, exit
the function and let the callers decide what to do next.
Link: https://lore.kernel.org/all/CAHk-=whs5MdtNjzFkTyaUy=vHi=qwWgPi0JgTe6OYUYMNSRZfg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.792933613@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: e30f53aad2202 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Since fscache can utilize iov_iter to write dest buffers, bio_vec can
be used in this way too.
To simplify this, pseudo bios are prepared and bio_vec will be filled
with bio_add_page(). And a common .bi_end_io will be called directly
to handle I/O completions.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240308094159.40547-2-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
So far the fscache mode supports uncompressed data only, and the data
read from fscache is put directly into the target page cache. As the
support for compressed data in fscache mode is going to be introduced,
rework the fscache internals so that the following compressed part
could make the raw data read from fscache be directed to the target
buffer it wants, decompress the raw data, and finally fill the page
cache with the decompressed data.
As the first step, a new structure, i.e. erofs_fscache_io (io), is
introduced to describe a generic read request from the fscache, while
the caller can specify the target buffer it wants in the iov_iter
structure (io->iter). Besides, the caller can also specify its
completion callback and private data through erofs_fscache_io, which
will be called to make further handling, e.g. unlocking the page cache
for uncompressed data or decompressing the read raw data, when the read
request from the fscache completes. Now erofs_fscache_read_io_async()
serves as a generic interface for reading raw data from fscache for both
compressed and uncompressed data.
The erofs_fscache_rq structure is kept to describe a request to fill the
page cache in the specified range.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240308094159.40547-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Lockdep reported the following issue when mounting erofs with a domain_id:
============================================
WARNING: possible recursive locking detected
6.8.0-rc7-xfstests #521 Not tainted
--------------------------------------------
mount/396 is trying to acquire lock:
ffff907a8aaaa0e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
but task is already holding lock:
ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&type->s_umount_key#50/1);
lock(&type->s_umount_key#50/1);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by mount/396:
#0: ffff907a8aaa90e0 (&type->s_umount_key#50/1){+.+.}-{3:3},
at: alloc_super+0xe3/0x3d0
#1: ffffffffc00e6f28 (erofs_domain_list_lock){+.+.}-{3:3},
at: erofs_fscache_register_fs+0x3d/0x270 [erofs]
stack backtrace:
CPU: 1 PID: 396 Comm: mount Not tainted 6.8.0-rc7-xfstests #521
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
validate_chain+0x5c4/0xa00
__lock_acquire+0x6a9/0xd50
lock_acquire+0xcd/0x2b0
down_write_nested+0x45/0xd0
alloc_super+0xe3/0x3d0
sget_fc+0x62/0x2f0
vfs_get_super+0x21/0x90
vfs_get_tree+0x2c/0xf0
fc_mount+0x12/0x40
vfs_kern_mount.part.0+0x75/0x90
kern_mount+0x24/0x40
erofs_fscache_register_fs+0x1ef/0x270 [erofs]
erofs_fc_fill_super+0x213/0x380 [erofs]
This is because the file_system_type of both erofs and the pseudo-mount
point of domain_id is erofs_fs_type, so two successive calls to
alloc_super() are considered to be using the same lock and trigger the
warning above.
Therefore add a nodev file_system_type called erofs_anon_fs_type in
fscache.c to silence this complaint. Because kern_mount() takes a
pointer to struct file_system_type, not its (string) name. So we don't
need to call register_filesystem(). In addition, call init_pseudo() in
erofs_anon_init_fs_context() as suggested by Al Viro, so that we can
remove erofs_fc_fill_pseudo_super(), erofs_fc_anon_get_tree(), and
erofs_anon_context_ops.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: a9849560c55e ("erofs: introduce a pseudo mnt to manage shared cookies")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-and-tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Link: https://lore.kernel.org/r/20240307101018.2021925-1-libaokun1@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Convert erofs_try_to_free_all_cached_pages() and
z_erofs_cache_release_folio().
Besides, erofs_page_is_managed() is moved to zdata.c and renamed
as erofs_folio_is_managed().
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-6-hsiangkao@linux.alibaba.com
|
|
Use bio_for_each_folio() to iterate over each folio in the bio and
there is no large folios for now.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-5-hsiangkao@linux.alibaba.com
|
|
Introduce a folio member to `struct z_erofs_bvec` and convert most
of z_erofs_fill_bio_vec() to folios, which is still straight-forward.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-4-hsiangkao@linux.alibaba.com
|
|
`justfound` is introduced to identify cached folios that are just added
to compressed bvecs so that more checks can be applied in the I/O
submission path.
EROFS is quite now stable compared to the codebase at that stage.
`justfound` becomes a burden for upcoming features. Drop it.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-3-hsiangkao@linux.alibaba.com
|
|
It is a straight-forward conversion. Besides, it's renamed as
z_erofs_scan_folio().
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-2-hsiangkao@linux.alibaba.com
|
|
Online folios are locked file-backed folios which will eventually
keep decoded (e.g. decompressed) data of each inode for end users to
utilize. It may belong to a few pclusters and contain other data (e.g.
compressed data for inplace I/Os) temporarily in a time-sharing manner
to reduce memory footprints for low-ended storage devices with high
latencies under heary I/O pressure.
Apart from folio_end_read() usage, it's a straight-forward conversion.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240305091448.1384242-1-hsiangkao@linux.alibaba.com
|
|
We don't need the "out" label any more, so remove "ret" and return
directly on error.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: linux-mm@kvack.org
Cc: linux-fsdevel@vger.kernel.org
|
|
There is no need to call memset(..., 0, ...) on memory allocated by
kcalloc(). It is already zeroed.
Remove the redundant call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/fa2597400051c18c6ca11187b0e4b906729991b2.1709972649.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Replace open-coded encoding logic with the use of conventional XDR
utility functions. Add a tracepoint to make replays observable in
field troubleshooting situations.
The WARN_ON is removed. A stack trace is of little use, as there is
only one call site for nfsd4_encode_replay(), and a buffer length
shortage here is unlikely.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
