summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-01NFS/flexfiles: Don't invalidate DS deviceids for being unresponsiveTrond Myklebust
If the DS is unresponsive, we want to just mark it as such, while reporting the errors. If the server later returns the same deviceid in a new layout, then we don't want to have to look it up again. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFS/flexfiles: Remove bogus checks for invalid deviceidsTrond Myklebust
We already check the deviceids before we start the RPC call. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFS/flexfiles: Avoid unnecessary layout invalidationsTrond Myklebust
In ff_layout_mirror_valid() we may not want to invalidate the layout segment despite the call to GETDEVICEINFO failing. The reason is that a read may still be able to make progress on another mirror. So instead we let the caller (in this case nfs4_ff_layout_prepare_ds()) decide whether or not it needs to invalidate. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFS/flexfiles: refactor calls to fs4_ff_layout_prepare_ds()Trond Myklebust
While we may want to skip attempting to connect to a downed mirror when we're deciding which mirror to select for a read, we do not want to do so once we've committed to attempting the I/O in ff_layout_read/write_pagelist(), or ff_layout_initiate_commit() Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFSv4: Handle early exit in layoutget by returning an errorTrond Myklebust
If the LAYOUTGET rpc call exits early without an error, convert it to EAGAIN. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFS/flexfiles: Send LAYOUTERROR when failing over mirrored readsTrond Myklebust
When a read to the preferred mirror returns an error, the flexfiles driver records the error in the inode list and currently marks the layout for return before failing over the attempted read to the next mirror. What we actually want to do is fire off a LAYOUTERROR to notify the MDS that there is an issue with the preferred mirror, then we fail over. Only once we've failed to read from all mirrors should we return the layout. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01dax: Flush partial PMDs correctlyMatthew Wilcox
The radix tree would rewind the index in an iterator to the lowest index of a multi-slot entry. The XArray iterators instead leave the index unchanged, but I overlooked that when converting DAX from the radix tree to the XArray. Adjust the index that we use for flushing to the start of the PMD range. Fixes: c1901cd33cf4 ("page cache: Convert find_get_entries_tag to XArray") Cc: <stable@vger.kernel.org> Reported-by: Piotr Balcer <piotr.balcer@intel.com> Tested-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Matthew Wilcox <willy@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-03-01Merge branch 'doc-net-ieee802154-move-from-plain-text-to-rst'David S. Miller
Stefan Schmidt says: ==================== doc: net: ieee802154: move from plain text to rst The ieee802154 subsystem doc was still in plain text. With the networking book taking shape I thought it was time to do the first step and move it over to rst. This really is only the minimal conversion. I need to take some time to update and extend the docs. The patches are based on net-next, but they only touch the networking book so I would not expect and trouble. From what I have seen they would go through Jonathan's tree after being acked by Dave? If you want this patches against a different tree let me know. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01doc: net: ieee802154: remove old plain text docs after switching to rstStefan Schmidt
The plain text docs are converted to rst now, which allows us to remove the old text file from the tree. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01doc: net: ieee802154: introduce IEEE 802.15.4 subsystem doc in rst styleStefan Schmidt
Moving the ieee802154 docs from a plain text file into the new rst style. This commit only does the minimal needed change to bring the documentation over. Follow up patches will improve and extend on this. Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01devlink: fix kdocJakub Kicinski
devlink suffers from a few kdoc warnings: net/core/devlink.c:5292: warning: Function parameter or member 'dev' not described in 'devlink_register' net/core/devlink.c:5351: warning: Function parameter or member 'port_index' not described in 'devlink_port_register' net/core/devlink.c:5753: warning: Function parameter or member 'parent_resource_id' not described in 'devlink_resource_register' net/core/devlink.c:5753: warning: Function parameter or member 'size_params' not described in 'devlink_resource_register' net/core/devlink.c:5753: warning: Excess function parameter 'top_hierarchy' description in 'devlink_resource_register' net/core/devlink.c:5753: warning: Excess function parameter 'reload_required' description in 'devlink_resource_register' net/core/devlink.c:5753: warning: Excess function parameter 'parent_reosurce_id' description in 'devlink_resource_register' net/core/devlink.c:6451: warning: Function parameter or member 'region' not described in 'devlink_region_snapshot_create' net/core/devlink.c:6451: warning: Excess function parameter 'devlink_region' description in 'devlink_region_snapshot_create' Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01Merge branch 'net-aquantia-minor-bug-fixes-after-static-analysis'David S. Miller
Igor Russkikh says: ==================== net: aquantia: minor bug fixes after static analysis This patchset fixes minor errors and warnings found by smatch and kasan. Extra patch is to replace AQ_HW_WAIT_FOR with readx_poll_timeout to improve readability. V2: use readx_poll resubmitted to net-next since the changeset became quite big. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: use better wrappers for state registersNikita Danilov
Replace some direct registers reads with better online functions. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomicNikita Danilov
David noticed the original define was hiding 'err' variable reference. Thats confusing and counterintuitive. Andrew noted the whole macro could be replaced with standard readx_poll kernel macro. This makes code more readable. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: fixed instack structure overflowIgor Russkikh
This is a real stack undercorruption found by kasan build. The issue did no harm normally because it only overflowed 2 bytes after `bitary` array which on most architectures were mapped into `err` local. Fixes: bab6de8fd180 ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: fixed buffer overflowNikita Danilov
The overflow is detected by smatch: drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c: 175 aq_pci_func_free_irqs() error: buffer overflow 'self->aq_vec' 8 <= 31 In reality msix_entry_mask always restricts number of iterations. Adding extra condition to make logic clear and smatch happy. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: added newline at end of fileNikita Danilov
drivers/net/ethernet/aquantia/atlantic/aq_nic.c: 991:1: warning: no newline at end of file Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01net: aquantia: fixed memcpy sizeNikita Danilov
Not careful array dereference caused analysis tools to think there could be memory overflow. There was actually no corruption because the array is two dimensional. drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c: 140 aq_ethtool_get_strings() error: memcpy() '*aq_ethtool_stat_names' too small (32 vs 704) Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-01ipv4: Add ICMPv6 support when parse route ipprotoHangbin Liu
For ip rules, we need to use 'ipproto ipv6-icmp' to match ICMPv6 headers. But for ip -6 route, currently we only support tcp, udp and icmp. Add ICMPv6 support so we can match ipv6-icmp rules for route lookup. v2: As David Ahern and Sabrina Dubroca suggested, Add an argument to rtm_getroute_parse_ip_proto() to handle ICMP/ICMPv6 with different family. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: eacb9384a3fe ("ipv6: support sport, dport and ip_proto in RTM_GETROUTE") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02samples/bpf: silence compiler warning for xdpsock_user.cYonghong Song
Compiling xdpsock_user.c with 4.8.5, I hit the following compilation warning: HOSTCC samples/bpf/xdpsock_user.o /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c: In function ‘main’: /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:449:6: warning: ‘idx_cq’ may be used unini tialized in this function [-Wmaybe-uninitialized] u32 idx_cq, idx_fq; ^ /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:606:7: warning: ‘idx_rx’ may be used unini tialized in this function [-Wmaybe-uninitialized] u32 idx_rx, idx_tx = 0; ^ /data/users/yhs/work/net-next/samples/bpf/xdpsock_user.c:506:6: warning: ‘idx_rx’ may be used unini tialized in this function [-Wmaybe-uninitialized] u32 idx_rx, idx_fq = 0; As an example, the code pattern looks like: u32 idx_cq; ... ret = xsk_ring_prod__reserve(&xsk->umem->fq, rcvd, &idx_fq); if (ret) { ... } ... idx_fq ... The compiler warns since it does not know whether &idx_fq is assigned or not inside the library function xsk_ring_prod__reserve(). Let us assign an initial value 0 to such auto variables to silence compiler warning. Fixes: 248c7f9c0e21 ("samples/bpf: convert xdpsock to use libbpf for AF_XDP access") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02selftests/bpf: set unlimited RLIMIT_MEMLOCK for test_sock_fieldsYonghong Song
This is to avoid permission denied error. A lot of systems may have a much lower number, e.g., 64KB, for RLIMIT_MEMLOCK, which may not be sufficient for the test to run successfully. Fixes: e0b27b3f97b8 ("bpf: Add test_sock_fields for skb->sk and bpf_tcp_sock") Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01PCI/PME: Fix possible use-after-free on removeSven Van Asbroeck
In remove(), ensure that the PME work cannot run after kfree() is called. Otherwise, this could result in a use-after-free. This issue was detected with the help of Coccinelle. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Sinan Kaya <okaya@kernel.org> Cc: Frederick Lawler <fred@fredlawl.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-03-02Merge branch 'bpf-doc-improvements'Daniel Borkmann
Andrii Nakryiko says: ==================== A bunch of BPF-related docs typo, wording and formatting fixes. v1->v2: - split off non-documentation changes into separate patchset ==================== Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02docs/bpf: minor casing/punctuation fixesAndrii Nakryiko
Fix few casing and punctuation glitches. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02docs/btf: reflow text to fill up to 78 charactersAndrii Nakryiko
Reflow paragraphs to more fully and evenly fill 78 character lines. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02docs/btf: fix typos, improve wordingAndrii Nakryiko
Fix various typos, some of the formatting and wording for Documentation/btf.rst. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02bpf: fix u64_stats_init() usage in bpf_prog_alloc()Eric Dumazet
We need to iterate through all possible cpus. Fixes: 492ecee892c2 ("bpf: enable program stats") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-02MIPS: eBPF: Fix icache flush end addressPaul Burton
The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by: Paul Burton <paul.burton@mips.com> Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-01NFSv4.2: Add client support for the generic 'layouterror' RPC callTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFSv4/flexfiles: Abort I/O early if the layout segment was invalidatedTrond Myklebust
If a layout segment gets invalidated while a pNFS I/O operation is queued for transmission, then we ideally want to abort immediately. This is particularly the case when there is a large number of I/O related RPCs queued in the RPC layer, and the layout segment gets invalidated due to an ENOSPC error, or an EACCES (because the client was fenced). We may end up forced to spam the MDS with a lot of otherwise unnecessary LAYOUTERRORs after that I/O fails. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFSv4/pnfs: Fix barriers in nfs4_mark_deviceid_unavailable()Trond Myklebust
Fix the memory barriers in nfs4_mark_deviceid_unavailable() and nfs4_test_deviceid_unavailable(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFS/flexfiles: Fix up sparse RCU annotationsTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFSv4/flexfiles: Fix invalid deref in FF_LAYOUT_DEVID_NODE()Trond Myklebust
If the attempt to instantiate the mirror's layout DS pointer failed, then that pointer may hold a value of type ERR_PTR(), so we need to check that before we dereference it. Fixes: 65990d1afbd2d ("pNFS/flexfiles: Fix a deadlock on LAYOUTGET") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01NFS: Add missing encode / decode sequence_maxsz to v4.2 operationsAnna Schumaker
These really should have been there from the beginning, but we never noticed because there was enough slack in the RPC request for the extra bytes. Chuck's recent patch to use au_cslack and au_rslack to compute buffer size shrunk the buffer enough that this was now a problem for SEEK operations on my test client. Fixes: f4ac1674f5da4 ("nfs: Add ALLOCATE support") Fixes: 2e72448b07dc3 ("NFS: Add COPY nfs operation") Fixes: cb95deea0b4aa ("NFS OFFLOAD_CANCEL xdr") Fixes: 624bd5b7b683c ("nfs: Add DEALLOCATE support") Fixes: 1c6dcbe5ceff8 ("NFS: Implement SEEK") Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-03-01tracing/kprobes: Use probe_kernel_read instead of probe_mem_readMasami Hiramatsu
Use probe_kernel_read() instead of probe_mem_read() because probe_mem_read() is a kind of wrapper for switching memory read function between uprobes and kprobes. Link: http://lkml.kernel.org/r/20190222011643.3e19ade84a3db3e83518648f@kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-01tracing: Fix event filters and triggers to handle negative numbersPavel Tikhomirov
Then tracing syscall exit event it is extremely useful to filter exit codes equal to some negative value, to react only to required errors. But negative numbers does not work: [root@snorch sys_exit_read]# echo "ret == -1" > filter bash: echo: write error: Invalid argument [root@snorch sys_exit_read]# cat filter ret == -1 ^ parse_error: Invalid value (did you forget quotes)? Similar thing happens when setting triggers. These is a regression in v4.17 introduced by the commit mentioned below, testing without these commit shows no problem with negative numbers. Link: http://lkml.kernel.org/r/20180823102534.7642-1-ptikhomirov@virtuozzo.com Cc: stable@vger.kernel.org Fixes: 80765597bc58 ("tracing: Rewrite filter logic to be simpler and faster") Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-03-01net/mlx5: Update the list of the PCI supported devicesEran Ben Elisha
Add the upcoming ConnectX-6 Dx. In addition, add "ConnectX Family mlx5Gen Virtual Function" device ID. Every new HCA VF will be identified with this device ID. Different VF models will be distinguished by their revision id. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Set peer flow needed also for multipathRoi Dayan
Update the predicate that determines if to duplicate rules installed on vport reps to account also for the multipath case. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Update check for merged eswitch deviceRoi Dayan
The current check only validates if both netdevs use the same ops which means both are vf reps or both uplink reps. Unlike the case where the two uplinks are bonded (VF LAG), under multipath scheme the switchdev parent id is not unified between the uplink reps (and all the associated vf reps). However, we still want to duplicate in the driver encap flows, adjust the merged eswitch check for that matter. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Use hint to resolve route when in HW multipath modeRoi Dayan
As part of creating the tunnel headers while offloading TC encap rules, we resolve the route and neighbour in order to get the source / destination mac. Since the way we offload multipath route is by having two HW rules, one per uplink port, doing naive route lookup might get us a "wrong" routing path which goes through the peer uplink and this will get us eventually to create a wrong L2 header for the tunnel. To avoid that, we use a device hint to get the correct route. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Always query offloaded tc peer rule counterRoi Dayan
Under multipath when encap rules are duplicated to HW in the driver, it's possible for one flow to be currently un-offloaded (e.g. lack of next-hop route or neigh entry) while the other flow is offloaded. As such, we move to query the counters of both flows at all times. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Re-attempt to offload flows on multipath port affinity eventsRoi Dayan
Under multipath it's possible for us to offload the flow only through the e-switch for which proper route through the uplink exists. When the port is up and the next-hop route is set again we want to offload through it as well. We generate SW event from the FIB event handler when multipath port affinity changes. The tc offloads code gets this event, goes over the flows which were marked as of having missing route and attempts to offload them. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5: Emit port affinity event for multipath offloadsRoi Dayan
Under multipath offload scheme, as part of handling fib events, emit mlx5 port affinity event on the enabled ports which will be handled by the tc offloads code. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Allow one failure when offloading tc encap rules under multipathRoi Dayan
In a similar manner to uplink/VF LAG, under multipath we add encap peer rule on the second port as well. However, unlike the LAG case, we do want to allow failure for adding one of the rules. This happens due to using a routing hint while doing the route lookup when one path (next hop device) is down. Introduce a new flag to indicate that route lookup failed for encap flow. Note that a flow may still not be offloaded to hw due to missing neighbour, in that case, the neigh update event will take care of it. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Don't inherit flow flags on peer flow creationRoi Dayan
Currently the peer flow inherits the flags from the original flow after we've set it. At this time the flags are set according to the flow state, e.g marked as going to slow path and such. Even if not getting us to real bugs now, this opens the door to get us to troubles later. Future proof the code and avoid the inheritance, use the peer flags as were set on input when we started adding the original flow. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5e: Activate HW multipath and handle port affinity based on FIB eventsRoi Dayan
To support multipath offload we are going to track SW multipath route and related nexthops. To do that we register to FIB notifier and handle the route and next-hops events and reflect that as port affinity to HW. When there is a new multipath route entry that all next-hops are the ports of an HCA we will activate LAG in HW. Egress wise, we use HW LAG as the means to emulate multipath on current HW which doesn't support port selection based on xmit hash. In the presence of multiple VFs which use multiple SQs (send queues) this yields fairly good distribution. HA wise, HW LAG buys us the ability for a given RQ (receive queue) to receive traffic from both ports and for SQs to migrate xmitting over the active port if their base port fails. When the route entry is being updated to single path we will update the HW port affinity to use that port only. If a next-hop becomes dead we update the HW port affinity to the living port. When all next-hops are alive again we reset the affinity to default. Due to FW/HW limitations, when a route is deleted we are not disabling the HW LAG since doing so will not allow us to enable it again while VFs are bounded. Typically this is just a temporary state when a routing daemon removes dead routes and later adds them back as needed. This patch only handles events for AF_INET. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5: Add multipath modeRoi Dayan
In order to offload ecmp-on-host scheme where next-hop routes are used, we will make use of HW LAG. Add accessor function to let upper layers in the driver to realize if the lag acts in multi-path mode. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5: Use own workqueue for lag netdev events processingRoi Dayan
Instead of using the system workqueue, allocate our own workqueue. This workqueue will be used to handle more work in the next patch. This patch doesn't change functionality. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5: Expose lag operations in header fileRoi Dayan
The change is a refactoring step towards a multipath use case. Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-01net/mlx5: Use unsigned int bit instead of bool as a struct memberRoi Dayan
This fix checkpatch check CHECK: Avoid using bool structure members because of possible alignment issues Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
generated by cgit (git 2.34.1) at 2025-09-16 11:58:15 +0000