summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-06-02mtd/r852: Fixes in case of DMA timeoutMaxim Levitsky
* Don't call complete on dma completion * do a INIT_COMPLETE before using it each time * Report DMA read error via ecc 'correct' I finally managed to make my system do suspend to ram propertly, and I see that if card was inserted during suspend (while system was off), I get dma timeouts on resume. Simple card reinsert solves the issue. This patch solves a crash that would happen otherwise Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-02mtd/r852: register IRQ as last stepMaxim Levitsky
Otherwise, if it fires right away, it might access uninitialized spinlock Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-06-02act_nat: fix the wrong checksum when addr isn't in old_addr/maskChangli Gao
fix the wrong checksum when addr isn't in old_addr/mask For TCP and UDP packets, when addr isn't in old_addr/mask we don't do SNAT or DNAT, and we should not update layer 4 checksum. Signed-off-by: Changli Gao <xiaosuo@gmail.com> ---- net/sched/act_nat.c | 4 ++++ 1 file changed, 4 insertions(+) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02net/fec: fix pm to survive to suspend/resumeEric Bénard
* in the actual driver, calling fec_stop and fec_enet_init doesn't allow to have a working network interface at resume (where a ifconfig down and up is required to recover the interface) * by using fec_enet_close and fec_enet_open, this patch solves this problem and handle the case where the link changed between suspend and resume * this patch also disable clock at suspend and reenable it at resume Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: count RX DMA OVR as rx_fifo_errorPhil Sutter
This way, RX DMA overruns (actually being caused by overrun of the 512byte input FIFO) show up in ifconfig output. The rx_fifo_errors counter is unused otherwise. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: use netdev_alloc_skb_ip_align() here, tooPhil Sutter
This patch completes commit 89d71a66c40d629e3b1285def543ab1425558cd5 which missed this spot, as it seems. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02korina: fix deadlock on RX FIFO overrunPhil Sutter
By calling korina_restart(), the IRQ handler tries to disable the interrupt it's currently serving. This leads to a deadlock since disable_irq() waits for any running IRQ handlers to finish before returning. This patch addresses the issue by turning korina_restart() into a workqueue task, which is then scheduled when needed. Reproducing the deadlock is easily done using e.g. GNU netcat to send large amounts of UDP data to the host running this driver. Note that the same problem (and fix) applies to TX FIFO underruns, but apparently these are less easy to trigger. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02Merge branch 'fix/asoc' into for-linusTakashi Iwai
2010-06-02Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-06-02Merge branch 'for-2.6.35' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2010-06-02Merge branch 'master' of git.alsa-project.org:alsa-kernel into fix/hdaTakashi Iwai
2010-06-02ALSA: hda-intel - fix wallclk variable update and conditionJaroslav Kysela
This patch fixes thinko introduced in "last minutes" before commiting of the last wallclk patch. It also fixes the condition checking if the first period after last wallclk update is processed. There is a little rounding error in period_wallclk. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2010-06-02net: fix conflict between null_or_orig and null_or_bondJohn Fastabend
If a skb is received on an inactive bond that does not meet the special cases checked for by skb_bond_should_drop it should only be delivered to exact matches as the comment in netif_receive_skb() says. However because null_or_bond could also be null this is not always true. This patch renames null_or_bond to orig_or_bond and initializes it to orig_dev. This keeps the intent of null_or_bond to pass frames received on VLAN interfaces stacked on bonding interfaces without invalidating the statement for null_or_orig. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02net: init_vlan should not copy slave or master flagsJohn Fastabend
The vlan device should not copy the slave or master flags from the real device. It is not in the bond until added nor is it a master. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02Merge branch 'fix/hda' into for-linusTakashi Iwai
2010-06-02ALSA: asihpi - Fix uninitialized variableTakashi Iwai
Initialize prev_ctl properly before reference: sound/pci/asihpi/asihpi.c: In function ‘snd_card_asihpi_mixer_new’: sound/pci/asihpi/asihpi.c:2568:30: warning: ‘prev_ctl.dst_node_index’ may be used uninitialized in this function Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-06-02enic: bug fix: make the set/get netlink VF_PORT support symmetricalScott Feldman
To make get/set netlink VF_PORT truly symmetrical, we need to keep track of what items are set and only return those items on get. Previously, the driver wasn't differentiating between a set of attr with a NULL string, for example, and not setting the attr at all. We only want to return the NULL string if the attr was actually set with a NULL string. Otherwise, don't return the attr. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02bnx2: Fix hang during rmmod bnx2.Michael Chan
The regression is caused by: commit 4327ba435a56ada13eedf3eb332e583c7a0586a9 bnx2: Fix netpoll crash. If ->open() and ->close() are called multiple times, the same napi structs will be added to dev->napi_list multiple times, corrupting the dev->napi_list. This causes free_netdev() to hang during rmmod. We fix this by calling netif_napi_del() during ->close(). Also, bnx2_init_napi() must not be in the __devinit section since it is called by ->open(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02xfrm: force a dst reference in __xfrm_route_forward()Eric Dumazet
Packets going through __xfrm_route_forward() have a not refcounted dst entry, since we enabled a noref forwarding path. xfrm_lookup() might incorrectly release this dst entry. It's a bit late to make invasive changes in xfrm_lookup(), so lets force a refcount in this path. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02sh: Make intc messages consistent via pr_fmt.Paul Mundt
Wrapping pr_fmt to the KBUILD_MODNAME prefix seems to be the trendy thing to do these days, so just do that instead of manually tidying up the stragglers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on ms7724seKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-migorKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-ecovec24Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: make sure static declaration on mach-ap325rxaKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02clocksource: sh_cmt: compute mult and shift before registrationPaul Mundt
Based on the sh_tmu change in 66f49121ffa41a19c59965b31b046d8368fec3c7 ("clocksource: sh_tmu: compute mult and shift before registration"). The same issues impact the sh_cmt driver, so we take the same approach here. Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02clocksource: sh_tmu: compute mult and shift before registrationAurelien Jarno
Since commit 98962465ed9e6ea99c38e0af63fe1dcb5a79dc25 ("nohz: Prevent clocksource wrapping during idle"), the CPU of an R2D board never goes to idle. This commit assumes that mult and shift are assigned before the clocksource is registered. As a consequence the safe maximum sleep time is negative and the CPU never goes into idle. This patch fixes the problem by moving mult and shift initialization from sh_tmu_clocksource_enable() to sh_tmu_register_clocksource(). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Cc: stable@kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02powerpc/macio: Fix probing of macio devices by using the right of match tableBenjamin Herrenschmidt
Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02agp/uninorth: Fix oops caused by flushing too muchPaul Mackerras
This fixes a sporadic oops at boot on G5 Power Macs. The table_end variable has the address of the last byte of the table. Adding on PAGE_SIZE means we flush too much, and if the page after the table is not mapped for any reason, the kernel will oops. Instead we add on 1 because flush_dcache_range() interprets its second argument as the first byte past the range to be flushed. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02powerpc/pasemi: Update MAINTAINERS fileOlof Johansson
PWRficient platform work is definitely in maintenance mode these days, update MAINTAINERS file to reflect reality. Website is long gone as well. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02powerpc/cell: Fix integer constant warningDenis Kirjanov
Fix smatch warning: warning: constant 0x800000000 is so big it is long Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02powerpc/kprobes: Remove resume_execution() in kprobesAnanth N Mavinakayanahalli
emulate_step() in kprobe_handler() would've already determined if the probed instruction can be emulated. We single-step in hardware only if the instruction couldn't be emulated. resume_execution() therefore is superfluous -- all we need is to fix up the instruction pointer after single-stepping. Thanks to Paul Mackerras for catching this. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02powerpc/macio: Don't dereference pointer before null checkAndreas Schwab
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-02of/powerpc: fix 85xx RapidIO device node pointerAlexandre Bounine
Fixes bug introduced by commit 61c7a080a5a061c976988fd4b844dfb468dda255 (of: Always use 'struct device.of_node' to get device node pointer) Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-06-02Input: ads7846 - fix compiler warning in ads7846_probe()Dmitry Torokhov
This patch fixes the follwing warning introduced by commit 067fb2f648543894ce775082c5636f4c32b99e4f ("Input: ads7846 - return error on regulator_get() failure"): drivers/input/touchscreen/ads7846.c: In function 'ads7846_probe': drivers/input/touchscreen/ads7846.c:1167: warning: format '%ld' expects type 'long int', but argument 4 has type 'int' Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-02x86, smpboot: Fix cores per node printing on bootBorislav Petkov
Percpu initialization happens now after booting the cores on the machine and this causes them all to be displayed as belonging to node 0: Jun 8 05:57:21 kepek kernel: [ 0.106999] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 Ok. Use early_cpu_to_node() to get the correct node of each core instead. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Mike Travis <travis@sgi.com> LKML-Reference: <20100601190455.GA14237@aftab> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-06-02Merge branch 'sh/iomap'Paul Mundt
2010-06-02sh: PIO disabling for x3proto and urquell.Paul Mundt
urquell only provides PIO in the PCI case, while the x3proto board never had a working PCIe controller, so it can simply disable it outright. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: mach-sdk7786: conditionally disable PIO support.Paul Mundt
SDK7786 only supports PIO via the PCI I/O space, so we disable PIO completely for the non-PCI case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02sh: support for platforms without PIO.Paul Mundt
This extends some of the existing special casing for HAS_IOPORT platforms and gets it to the point where platforms can begin to conditionally select it. The major changes here are that the PIO routines themselves go away completely, including all of the machvec port mapping wrappers. With this in place it's possible for any non-machvec abusing platform to disable PIO completely. At present this is left as an opt-in until the abusers are the odd ones out instead of the majority. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02usb: r8a66597-hcd pio to mmio accessor conversion.Paul Mundt
r8a66597-hcd is erroneously using PIO routines on MMIO registers, which presently blows up for any platform that elects to either override or do away with PIO routines. This managed to work for the common cases since the PIO routines were simply wrapped to their MMIO counterparts. This switches over to using the MMIO routines directly, and enables us to kill off a lot of superfluous casting in the process. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02usb: gadget: r8a66597-udc pio to mmio accessor conversion.Paul Mundt
r8a66597-udc is erroneously using PIO routines on MMIO registers, which presently blows up for any platform that elects to either override or do away with PIO routines. This managed to work for the common cases since the PIO routines were simply wrapped to their MMIO counterparts. This switches over to using the MMIO routines directly, and enables us to kill off a lot of superfluous casting in the process. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02usb: gadget: m66592-udc pio to mmio accessor conversion.Paul Mundt
m66592-udc is erroneously using PIO routines on MMIO registers, which presently blows up for any platform that elects to either override or do away with PIO routines. This managed to work for the common cases since the PIO routines were simply wrapped to their MMIO counterparts. This switches over to using the MMIO routines directly, and enables us to kill off a lot of superfluous casting in the process. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-02Merge branch 'perf/urgent' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent
2010-06-02Input: tps6507x-ts - a couple work queue cleanupsDan Carpenter
1) Use msecs_to_jiffies() instead of calculating by hand. 2) Call cancel_delayed_work_sync() instead of cancel_delayed_work() followed by a separate flush_workqueue(). 3) Remove the "tsc->wq = 0;" Sparse complains about that because tsc->wq is a pointer, not an int. It's not needed because we just free the pointer anyway. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-06-01Merge branches 'bugzilla-14668' and 'misc-2.6.35' into releaseLen Brown
2010-06-01ceph: fix f_namelen reported by statfsSage Weil
We were setting f_namelen in kstatfs to PATH_MAX instead of NAME_MAX. That disagrees with ceph_lookup behavior (which checks against NAME_MAX), and also makes the pjd posix test suite spit out ugly errors because with can't clean up its temporary files. Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-01ceph: fix memory leak in statfsYehuda Sadeh
Freeing the statfs request structure when required. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-01ceph: fix d_subdirs ordering problemHenry C Chang
We misused list_move_tail() to order the dentry in d_subdirs. This will screw up the d_subdirs order. This bug can be reliably reproduced by: 1. mount ceph fs. 2. on ceph fs, git clone git://ceph.newdream.net/git/ceph.git 3. Run autogen.sh in ceph directory. (Note: Errors only occur at the first time you run autogen.sh.) Signed-off-by: Henry C Chang <henry_c_chang@tcloudcomputing.com> Signed-off-by: Sage Weil <sage@newdream.net>
2010-06-01nfsd: nfsd_setattr needs to call commit_metadataChristoph Hellwig
The conversion of write_inode_now calls to commit_metadata in commit f501912a35c02eadc55ca9396ece55fe36f785d0 missed out the call in nfsd_setattr. But without this conversion we can't guarantee that a SETATTR request has actually been commited to disk with XFS, which causes a regression from 2.6.32 (only for NFSv2, but anyway). Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: stable@kernel.org Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2010-06-01Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Don't export cvt_fd & _df when CONFIG_PPC_FPU is not set powerpc/44x: icon: select SM502 and frame buffer console support powerpc/85xx: Add P1021MDS board support powerpc/85xx: Change MPC8572DS camp dtses for MSI sharing powerpc/fsl_msi: add removal path and probe failing path powerpc/fsl_msi: enable msi sharing through AMP OSes powerpc/fsl_msi: enable msi allocation in all banks powerpc/fsl_msi: fix the conflict of virt_msir's chip_data powerpc/fsl_msi: Add multiple MSI bank support powerpc/kexec: Add support for FSL-BookE powerpc/fsl-booke: Move the entry setup code into a seperate file powerpc/fsl-booke: fix the case where we are not in the first page powerpc/85xx: Enable support for ports 3 and 4 on 8548 CDS powerpc/fsl-booke: Add hibernation support for FSL BookE processors powerpc/e500mc: Implement machine check handler. powerpc/44x: Add basic ICON PPC440SPe board support powerpc/44x: Fix UART clocks on 440SPe powerpc/44x: Add reset-type to katmai.dts powerpc/44x: Adding PCI-E support for PowerPC 460SX based SOC.
generated by cgit (git 2.34.1) at 2025-09-12 20:17:08 +0000