summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-08-09selftests: forwarding: tc_actions: Use ncat instead of ncIdo Schimmel
The test relies on 'nc' being the netcat version from the nmap project. While this seems to be the case on Fedora, it is not the case on Ubuntu, resulting in failures such as [1]. Fix by explicitly using the 'ncat' utility from the nmap project and the skip the test in case it is not installed. [1] # timeout set to 0 # selftests: net/forwarding: tc_actions.sh # TEST: gact drop and ok (skip_hw) [ OK ] # TEST: mirred egress flower redirect (skip_hw) [ OK ] # TEST: mirred egress flower mirror (skip_hw) [ OK ] # TEST: mirred egress matchall mirror (skip_hw) [ OK ] # TEST: mirred_egress_to_ingress (skip_hw) [ OK ] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # nc: invalid option -- '-' # usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] # [-m minttl] [-O length] [-P proxy_username] [-p source_port] # [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit] # [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] # [destination] [port] # TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL] # server output check failed # INFO: Could not test offloaded functionality not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1 Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-12-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: ethtool_mm: Skip when MAC Merge is not supportedIdo Schimmel
MAC Merge cannot be tested with veth pairs, resulting in failures: # ./ethtool_mm.sh [...] TEST: Manual configuration with verification: swp1 to swp2 [FAIL] Verification did not succeed Fix by skipping the test when the interfaces do not support MAC Merge. Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-11-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: hw_stats_l3_gre: Skip when using veth pairsIdo Schimmel
Layer 3 hardware stats cannot be used when the underlying interfaces are veth pairs, resulting in failures: # ./hw_stats_l3_gre.sh TEST: ping gre flat [ OK ] TEST: Test rx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 TEST: Test tx packets: [FAIL] Traffic not reflected in the counter: 0 -> 0 Fix by skipping the test when used with veth pairs. Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-10-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: ethtool_extended_state: Skip when using veth pairsIdo Schimmel
Ethtool extended state cannot be tested with veth pairs, resulting in failures: # ./ethtool_extended_state.sh TEST: Autoneg, No partner detected [FAIL] Expected "Autoneg", got "Link detected: no" [...] Fix by skipping the test when used with veth pairs. Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-9-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: ethtool: Skip when using veth pairsIdo Schimmel
Auto-negotiation cannot be tested with veth pairs, resulting in failures: # ./ethtool.sh TEST: force of same speed autoneg off [FAIL] error in configuration. swp1 speed Not autoneg off [...] Fix by skipping the test when used with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-8-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: Add a helper to skip test when using veth pairsIdo Schimmel
A handful of tests require physical loopbacks to be used instead of veth pairs. Add a helper that these tests will invoke in order to be skipped when executed with veth pairs. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-7-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: Set default IPv6 traceroute utilityIdo Schimmel
The test uses the 'TROUTE6' environment variable to encode the name of the IPv6 traceroute utility. By default (without a configuration file), this variable is not set, resulting in failures: # ./ip6_forward_instats_vrf.sh TEST: ping6 [ OK ] TEST: Ip6InTooBigErrors [ OK ] TEST: Ip6InHdrErrors [FAIL] TEST: Ip6InAddrErrors [ OK ] TEST: Ip6InDiscards [ OK ] Fix by setting a default utility name and skip the test if the utility is not present. Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/adc5e40d-d040-a65e-eb26-edf47dac5b02@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-6-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: bridge_mdb_max: Check iproute2 versionIdo Schimmel
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in errors: # ./bridge_mdb_max.sh INFO: 802.1d tests TEST: cfg4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: ctl4: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected TEST: cfg6: port: ngroups reporting [FAIL] Number of groups was null, now is null, but 5 expected [...] Fix by skipping the test if iproute2 is too old. Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-5-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: bridge_mdb: Check iproute2 versionIdo Schimmel
The selftest relies on iproute2 changes present in version 6.3, but the test does not check for it, resulting in error: # ./bridge_mdb.sh INFO: # Host entries configuration tests TEST: Common host entries configuration tests (IPv4) [FAIL] Managed to add IPv4 host entry with a filter mode TEST: Common host entries configuration tests (IPv6) [FAIL] Managed to add IPv6 host entry with a filter mode TEST: Common host entries configuration tests (L2) [FAIL] Managed to add L2 host entry with a filter mode INFO: # Port group entries configuration tests - (*, G) Command "replace" is unknown, try "bridge mdb help". [...] Fix by skipping the test if iproute2 is too old. Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/6b04b2ba-2372-6f6b-3ac8-b7cba1cfae83@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: Switch off timeoutIdo Schimmel
The default timeout for selftests is 45 seconds, but it is not enough for forwarding selftests which can takes minutes to finish depending on the number of tests cases: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # TEST: IGMPv2 report 239.10.10.10 [ OK ] # TEST: IGMPv2 leave 239.10.10.10 [ OK ] # TEST: IGMPv3 report 239.10.10.10 is_include [ OK ] # TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ] # not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds Fix by switching off the timeout and setting it to 0. A similar change was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf: Switch off timeout"). Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/8d149f8c-818e-d141-a0ce-a6bae606bc22@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09selftests: forwarding: Skip test when no interfaces are specifiedIdo Schimmel
As explained in [1], the forwarding selftests are meant to be run with either physical loopbacks or veth pairs. The interfaces are expected to be specified in a user-provided forwarding.config file or as command line arguments. By default, this file is not present and the tests fail: # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # Command line is not complete. Try option "help" # Failed to create netif not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1 [...] Fix by skipping a test if interfaces are not provided either via the configuration file or command line arguments. # make -C tools/testing/selftests TARGETS=net/forwarding run_tests [...] TAP version 13 1..102 # timeout set to 45 # selftests: net/forwarding: bridge_igmp.sh # SKIP: Cannot create interface. Name not specified ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP [1] tools/testing/selftests/net/forwarding/README Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests") Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/856d454e-f83c-20cf-e166-6dc06cbc1543@alu.unizg.hr/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230808141503.4060661-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09Merge tag 'nf-next-2023-08-08' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Florian Westphal says: ==================== netfilter updates for net-next First 4 Patches, from Yue Haibing, remove unused prototypes in various netfilter headers. Last patch makes nfnetlink_log to always include a packet timestamp, up to now it was only included if the skb had assigned previously. From Maciej Żenczykowski. * tag 'nf-next-2023-08-08' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nfnetlink_log: always add a timestamp netfilter: h323: Remove unused function declarations netfilter: conntrack: Remove unused function declarations netfilter: helper: Remove unused function declarations netfilter: gre: Remove unused function declaration nf_ct_gre_keymap_flush() ==================== Link: https://lore.kernel.org/r/20230808124159.19046-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09tcp: add missing family to tcp_set_ca_state() tracepointEric Dumazet
Before this code is copied, add the missing family, as we did in commit 3dd344ea84e1 ("net: tracepoint: exposing sk_family in all tcp:tracepoints") Fixes: 15fcdf6ae116 ("tcp: Add tracepoint for tcp_set_ca_state") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Ping Gan <jacky_gam_2001@163.com> Cc: Manjusaka <me@manjusaka.me> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230808084923.2239142-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09Merge branch 'nexthop-nexthop-dump-fixes'Jakub Kicinski
Ido Schimmel says: ==================== nexthop: Nexthop dump fixes Patches #1 and #3 fix two problems related to nexthops and nexthop buckets dump, respectively. Patch #2 is a preparation for the third patch. The pattern described in these patches of splitting the NLMSG_DONE to a separate response is prevalent in other rtnetlink dump callbacks. I don't know if it's because I'm missing something or if this was done intentionally to ensure the message is delivered to user space. After commit 0642840b8bb0 ("af_netlink: ensure that NLMSG_DONE never fails in dumps") this is no longer necessary and I can improve these dump callbacks assuming this analysis is correct. No regressions in existing tests: # ./fib_nexthops.sh [...] Tests passed: 230 Tests failed: 0 ==================== Link: https://lore.kernel.org/r/20230808075233.3337922-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09nexthop: Fix infinite nexthop bucket dump when using maximum nexthop IDIdo Schimmel
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop bucket dump callback always returns a positive number if nexthop buckets were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthop buckets are present. In the last recvmsg() call the dump callback will not fill in any nexthop buckets because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396980, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 128 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 6.66 nhid 1 id 10 index 1 idle_time 6.66 nhid 1 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396980, nlmsg_pid=347}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # ip nexthop bucket id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 id 4294967295 index 0 idle_time 5.55 nhid 1 id 4294967295 index 1 idle_time 5.55 nhid 1 [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOPBUCKET responses: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id $((2**32-1)) group 1 type resilient buckets 2 # strace -e sendto,recvmsg -s 5 ip nexthop bucket sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOPBUCKET, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691396737, nlmsg_pid=0}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 148 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=64, nlmsg_type=RTM_NEWNEXTHOPBUCKET, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, {family=AF_UNSPEC, data="\x00\x00\x00\x00\x00"...}], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691396737, nlmsg_pid=350}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 148 id 4294967295 index 0 idle_time 6.61 nhid 1 id 4294967295 index 1 idle_time 6.61 nhid 1 +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic_res [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-4-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09nexthop: Make nexthop bucket dump more efficientIdo Schimmel
rtm_dump_nexthop_bucket_nh() is used to dump nexthop buckets belonging to a specific resilient nexthop group. The function returns a positive return code (the skb length) upon both success and failure. The above behavior is problematic. When a complete nexthop bucket dump is requested, the function that walks the different nexthops treats the non-zero return code as an error. This causes buckets belonging to different resilient nexthop groups to be dumped using different buffers even if they can all fit in the same buffer: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 1 # ip nexthop add id 20 group 1 type resilient buckets 1 # strace -e recvmsg -s 0 ip nexthop bucket [...] recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64 id 10 index 0 idle_time 10.27 nhid 1 [...] recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 64 id 20 index 0 idle_time 6.44 nhid 1 [...] Fix by only returning a non-zero return code when an error occurred and restarting the dump from the bucket index we failed to fill in. This allows buckets belonging to different resilient nexthop groups to be dumped using the same buffer: # ip link add name dummy1 up type dummy # ip nexthop add id 1 dev dummy1 # ip nexthop add id 10 group 1 type resilient buckets 1 # ip nexthop add id 20 group 1 type resilient buckets 1 # strace -e recvmsg -s 0 ip nexthop bucket [...] recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[...], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 128 id 10 index 0 idle_time 30.21 nhid 1 id 20 index 0 idle_time 26.7 nhid 1 [...] While this change is more of a performance improvement change than an actual bug fix, it is a prerequisite for a subsequent patch that does fix a bug. Fixes: 8a1bbabb034d ("nexthop: Add netlink handlers for bucket dump") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09nexthop: Fix infinite nexthop dump when using maximum nexthop IDIdo Schimmel
A netlink dump callback can return a positive number to signal that more information needs to be dumped or zero to signal that the dump is complete. In the second case, the core netlink code will append the NLMSG_DONE message to the skb in order to indicate to user space that the dump is complete. The nexthop dump callback always returns a positive number if nexthops were filled in the provided skb, even if the dump is complete. This means that a dump will span at least two recvmsg() calls as long as nexthops are present. In the last recvmsg() call the dump callback will not fill in any nexthops because the previous call indicated that the dump should restart from the last dumped nexthop ID plus one. # ip nexthop add id 1 blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394315, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 36 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 1], {nla_len=4, nla_type=NHA_BLACKHOLE}]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 36 id 1 blackhole recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 20 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394315, nlmsg_pid=343}, 0], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 20 +++ exited with 0 +++ This behavior is both inefficient and buggy. If the last nexthop to be dumped had the maximum ID of 0xffffffff, then the dump will restart from 0 (0xffffffff + 1) and never end: # ip nexthop add id $((2**32-1)) blackhole # ip nexthop id 4294967295 blackhole id 4294967295 blackhole [...] Fix by adjusting the dump callback to return zero when the dump is complete. After the fix only one recvmsg() call is made and the NLMSG_DONE message is appended to the RTM_NEWNEXTHOP response: # ip nexthop add id $((2**32-1)) blackhole # strace -e sendto,recvmsg -s 5 ip nexthop sendto(3, [[{nlmsg_len=24, nlmsg_type=RTM_GETNEXTHOP, nlmsg_flags=NLM_F_REQUEST|NLM_F_DUMP, nlmsg_seq=1691394080, nlmsg_pid=0}, {nh_family=AF_UNSPEC, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}], {nlmsg_len=0, nlmsg_type=0 /* NLMSG_??? */, nlmsg_flags=0, nlmsg_seq=0, nlmsg_pid=0}], 152, 0, NULL, 0) = 152 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=NULL, iov_len=0}], msg_iovlen=1, msg_controllen=0, msg_flags=MSG_TRUNC}, MSG_PEEK|MSG_TRUNC) = 56 recvmsg(3, {msg_name={sa_family=AF_NETLINK, nl_pid=0, nl_groups=00000000}, msg_namelen=12, msg_iov=[{iov_base=[[{nlmsg_len=36, nlmsg_type=RTM_NEWNEXTHOP, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, {nh_family=AF_INET, nh_scope=RT_SCOPE_UNIVERSE, nh_protocol=RTPROT_UNSPEC, nh_flags=0}, [[{nla_len=8, nla_type=NHA_ID}, 4294967295], {nla_len=4, nla_type=NHA_BLACKHOLE}]], [{nlmsg_len=20, nlmsg_type=NLMSG_DONE, nlmsg_flags=NLM_F_MULTI, nlmsg_seq=1691394080, nlmsg_pid=342}, 0]], iov_len=32768}], msg_iovlen=1, msg_controllen=0, msg_flags=0}, 0) = 56 id 4294967295 blackhole +++ exited with 0 +++ Note that if the NLMSG_DONE message cannot be appended because of size limitations, then another recvmsg() will be needed, but the core netlink code will not invoke the dump callback and simply reply with a NLMSG_DONE message since it knows that the callback previously returned zero. Add a test that fails before the fix: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [FAIL] [...] And passes after it: # ./fib_nexthops.sh -t basic [...] TEST: Maximum nexthop ID dump [ OK ] [...] Fixes: ab84be7e54fc ("net: Initial nexthop code") Reported-by: Petr Machata <petrm@nvidia.com> Closes: https://lore.kernel.org/netdev/87sf91enuf.fsf@nvidia.com/ Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230808075233.3337922-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09vlan: Fix VLAN 0 memory leakVlad Buslov
The referenced commit intended to fix memleak of VLAN 0 that is implicitly created on devices with NETIF_F_HW_VLAN_CTAG_FILTER feature. However, it doesn't take into account that the feature can be re-set during the netdevice lifetime which will cause memory leak if feature is disabled during the device deletion as illustrated by [0]. Fix the leak by unconditionally deleting VLAN 0 on NETDEV_DOWN event. [0]: > modprobe 8021q > ip l set dev eth2 up > ethtool -K eth2 rx-vlan-filter off > modprobe -r mlx5_ib > modprobe -r mlx5_core > cat /sys/kernel/debug/kmemleak unreferenced object 0xffff888103dcd900 (size 256): comm "ip", pid 1490, jiffies 4294907305 (age 325.364s) hex dump (first 32 bytes): 00 80 5d 03 81 88 ff ff 00 00 00 00 00 00 00 00 ..]............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000899f3bb9>] kmalloc_trace+0x25/0x80 [<000000002889a7a2>] vlan_vid_add+0xa0/0x210 [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q] [<000000009a0716b1>] notifier_call_chain+0x35/0xb0 [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0 [<0000000053d2b05d>] dev_change_flags+0x4d/0x60 [<00000000982807e9>] do_setlink+0x28d/0x10a0 [<0000000058c1be00>] __rtnl_newlink+0x545/0x980 [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70 [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390 [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100 [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0 [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0 [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60 [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200 [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0 unreferenced object 0xffff88813354fde0 (size 32): comm "ip", pid 1490, jiffies 4294907305 (age 325.364s) hex dump (first 32 bytes): a0 d9 dc 03 81 88 ff ff a0 d9 dc 03 81 88 ff ff ................ 81 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000899f3bb9>] kmalloc_trace+0x25/0x80 [<000000002da64724>] vlan_vid_add+0xdf/0x210 [<000000007177800e>] vlan_device_event+0x374/0x760 [8021q] [<000000009a0716b1>] notifier_call_chain+0x35/0xb0 [<00000000bbf3d162>] __dev_notify_flags+0x58/0xf0 [<0000000053d2b05d>] dev_change_flags+0x4d/0x60 [<00000000982807e9>] do_setlink+0x28d/0x10a0 [<0000000058c1be00>] __rtnl_newlink+0x545/0x980 [<00000000e66c3bd9>] rtnl_newlink+0x44/0x70 [<00000000a2cc5970>] rtnetlink_rcv_msg+0x29c/0x390 [<00000000d307d1e4>] netlink_rcv_skb+0x54/0x100 [<00000000259d16f9>] netlink_unicast+0x1f6/0x2c0 [<000000007ce2afa1>] netlink_sendmsg+0x232/0x4a0 [<00000000f3f4bb39>] sock_sendmsg+0x38/0x60 [<000000002f9c0624>] ____sys_sendmsg+0x1e3/0x200 [<00000000d6ff5520>] ___sys_sendmsg+0x80/0xc0 Fixes: efc73f4bbc23 ("net: Fix memory leak - vlan_info struct") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20230808093521.1468929-1-vladbu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09x86/mm: Fix VDSO and VVAR placement on 5-level paging machinesKirill A. Shutemov
Yingcong has noticed that on the 5-level paging machine, VDSO and VVAR VMAs are placed above the 47-bit border: 8000001a9000-8000001ad000 r--p 00000000 00:00 0 [vvar] 8000001ad000-8000001af000 r-xp 00000000 00:00 0 [vdso] This might confuse users who are not aware of 5-level paging and expect all userspace addresses to be under the 47-bit border. So far problem has only been triggered with ASLR disabled, although it may also occur with ASLR enabled if the layout is randomized in a just right way. The problem happens due to custom placement for the VMAs in the VDSO code: vdso_addr() tries to place them above the stack and checks the result against TASK_SIZE_MAX, which is wrong. TASK_SIZE_MAX is set to the 56-bit border on 5-level paging machines. Use DEFAULT_MAP_WINDOW instead. Fixes: b569bab78d8d ("x86/mm: Prepare to expose larger address space to userspace") Reported-by: Yingcong Wu <yingcong.wu@intel.com> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20230803151609.22141-1-kirill.shutemov%40linux.intel.com
2023-08-09mlxsw: spectrum_switchdev: Use is_zero_ether_addr() instead of ↵Ruan Jinjie
ether_addr_equal() Use is_zero_ether_addr() instead of ether_addr_equal() to check if the ethernet address is all zeros. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230808133528.4083501-1-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09tools: ynl-gen: add missing empty line between policiesJakub Kicinski
We're missing empty line between policies. DPLL will need this. Tested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20230808200907.1290647-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09net: switchdev: Remove unused declaration switchdev_port_fwd_mark_set()Yue Haibing
Commit 6bc506b4fb06 ("bridge: switchdev: Add forward mark support for stacked devices") removed the implementation but leave declaration. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20230808145955.2176-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09mlxbf_gige: Remove two unused function declarationsYue Haibing
Commit f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") declared but never implemented these. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Link: https://lore.kernel.org/r/20230808145249.41596-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09net: phy: Remove two unused function declarationsYue Haibing
Commit 1e2dc14509fd ("net: ethtool: Add helpers for reporting test results") declared but never implemented these function. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230808144610.19096-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09net: dsa: mark parsed interface mode for legacy switch driversRussell King (Oracle)
If we successfully parsed an interface mode with a legacy switch driver, populate that mode into phylink's supported interfaces rather than defaulting to the internal and gmii interfaces. This hasn't caused an issue so far, because when the interface doesn't match a supported one, phylink_validate() doesn't clear the supported mask, but instead returns -EINVAL. phylink_parse_fixedlink() doesn't check this return value, and merely relies on the supported ethtool link modes mask being cleared. Therefore, the fixed link settings end up being allowed despite validation failing. Before this causes a problem, arrange for DSA to more accurately populate phylink's supported interfaces mask so validation can correctly succeed. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/E1qTKdM-003Cpx-Eh@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09devlink: clear flag on port register error pathJiri Pirko
When xarray insertion fails, clear the flag. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230808082020.1363497-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09tools: ynl-gen: avoid rendering empty validate fieldJiri Pirko
When dont-validate flags are filtered out for do/dump op, the list may be empty. In that case, avoid rendering the validate field. Fixes: fa8ba3502ade ("ynl-gen-c.py: render netlink policies static for split ops") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230808090344.1368874-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09net: txgbe: Use pci_dev_id() to simplify the codeXiongfeng Wang
PCI core API pci_dev_id() can be used to get the BDF number for a pci device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Reviewed-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230808024931.147048-1-wangxiongfeng2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09bcm63xx_enet: Remove redundant initialization ownerLi Zetao
The platform_register_drivers() will set "THIS_MODULE" to driver.owner when register a platform_driver driver, so it is redundant initialization to set driver.owner in the statement. Remove it for clean code. Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20230808014702.2712699-1-lizetao1@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09tipc: Remove unused declaration tipc_link_build_bc_sync_msg()Yue Haibing
Commit 526669866140 ("tipc: let broadcast packet reception use new link receive function") declared but never implemented this. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230807142926.45752-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09platform/x86: ISST: Reduce noise for missing numa information in logsSrinivas Pandruvada
On platforms with no numa support and with several CPUs, logs have lots of noise for message "Fail to get numa node for CPU:.." Change pr_info() to pr_info_once() as one print is enough to show the issue. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20230808174359.50602-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-09platform/x86: msi-ec: Fix the buildJean Delvare
The msi-ec driver fails to build for me (gcc 7.5): CC [M] drivers/platform/x86/msi-ec.o drivers/platform/x86/msi-ec.c:72:6: error: initializer element is not constant { SM_ECO_NAME, 0xc2 }, ^~~~~~~~~~~ drivers/platform/x86/msi-ec.c:72:6: note: (near initialization for ‘CONF0.shift_mode.modes[0].name’) drivers/platform/x86/msi-ec.c:73:6: error: initializer element is not constant { SM_COMFORT_NAME, 0xc1 }, ^~~~~~~~~~~~~~~ drivers/platform/x86/msi-ec.c:73:6: note: (near initialization for ‘CONF0.shift_mode.modes[1].name’) drivers/platform/x86/msi-ec.c:74:6: error: initializer element is not constant { SM_SPORT_NAME, 0xc0 }, ^~~~~~~~~~~~~ drivers/platform/x86/msi-ec.c:74:6: note: (near initialization for ‘CONF0.shift_mode.modes[2].name’) (...) Don't try to be smart, just use defines for the constant strings. The compiler will recognize it's the same string and will store it only once in the data section anyway. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 392cacf2aa10 ("platform/x86: Add new msi-ec driver") Cc: stable@vger.kernel.org Cc: Nikita Kravets <teackot@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <markgross@kernel.org> Link: https://lore.kernel.org/r/20230805101010.54d49e91@endymion.delvare Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-09ACPI: resource: Honor MADT INT_SRC_OVR settings for IRQ1 on AMD ZenHans de Goede
On AMD Zen acpi_dev_irq_override() by default prefers the DSDT IRQ 1 settings over the MADT settings. This causes the keyboard to malfunction on some laptop models (see Links), all models from the Links have an INT_SRC_OVR MADT entry for IRQ 1. Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217336 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217406 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-09ACPI: resource: Always use MADT override IRQ settings for all legacy non ↵Hans de Goede
i8042 IRQs All the cases, were the DSDT IRQ settings should be used instead of the MADT override, are for IRQ 1 or 12, the PS/2 kbd resp. mouse IRQs. Simplify things by always honering the override for other legacy IRQs (for non DMI quirked cases). This allows removing the DMI quirks to honor the override for some non i8042 IRQs on some AMD ZEN based Lenovo models. Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-09ACPI: resource: revert "Remove "Zen" specific match and quirks"Hans de Goede
Commit a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks") is causing keyboard problems for quite a log of AMD based laptop users, leading to many bug reports. Revert this change for now, until we can come up with a better fix for the PS/2 IRQ trigger-type/polarity problems on some x86 laptops. Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2228891 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229165 Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229317 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217718 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217726 Link: https://bugzilla.kernel.org/show_bug.cgi?id=217731 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-10alpha: remove __init annotation from exported page_is_ram()Masahiro Yamada
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Commit c5a130325f13 ("ACPI/APEI: Add parameter check before error injection") exported page_is_ram(), hence the __init annotation should be removed. This fixes the modpost warning in ARCH=alpha builds: WARNING: modpost: vmlinux: page_is_ram: EXPORT_SYMBOL used for init symbol. Remove __init or EXPORT_SYMBOL. Fixes: c5a130325f13 ("ACPI/APEI: Add parameter check before error injection") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
2023-08-09tpm: Add a helper for checking hwrng enabledMario Limonciello
The same checks are repeated in three places to decide whether to use hwrng. Consolidate these into a helper. Also this fixes a case that one of them was missing a check in the cleanup path. Fixes: 554b841d4703 ("tpm: Disable RNG for all AMD fTPMs") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-09mm: Fix access_remote_vm() regression on tagged addressesKirill A. Shutemov
GDB uses /proc/PID/mem to access memory of the target process. GDB doesn't untag addresses manually, but relies on kernel to do the right thing. mem_rw() of procfs uses access_remote_vm() to get data from the target process. It worked fine until recent changes in __access_remote_vm() that now checks if there's VMA at target address using raw address. Untag the address before looking up the VMA. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Christina Schimpe <christina.schimpe@intel.com> Fixes: eee9c708cc89 ("gup: avoid stack expansion warning for known-good case") Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-09drm/amdkfd: disable IOMMUv2 support for RavenAlex Deucher
Use the dGPU path instead. There were a lot of platform issues with IOMMU in general on these chips due to windows not enabling IOMMU at the time. The dGPU path has been used for a long time with newer APUs and works fine. This also paves the way to simplify the driver significantly. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amdkfd: disable IOMMUv2 support for KV/CZAlex Deucher
Use the dGPU path instead. There were a lot of platform issues with IOMMU in general on these chips due to windows not enabling IOMMU at the time. The dGPU path has been used for a long time with newer APUs and works fine. This also paves the way to simplify the driver significantly. v2: use the dGPU queue manager functions Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amdkfd: ignore crat by defaultAlex Deucher
We are dropping the IOMMUv2 path, so no need to enable this. It's often buggy on consumer platforms anyway. Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amdgpu/gfx11: only enable CP GFX shadowing on SR-IOVAlex Deucher
This is only required for SR-IOV world switches, but it adds additional latency leading to reduced performance in some benchmarks. Disable for now on bare metal. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Fix a regression on Polaris cardsMario Limonciello
DCE products don't define a `remove_stream_from_ctx` like DCN ones do. This means that when compute_mst_dsc_configs_for_state() is called it always returns -EINVAL which causes MST to fail to setup. Cc: stable@vger.kernel.org # 6.4.y Cc: Harry Wentland <Harry.Wentland@amd.com> Reported-by: Klaus.Kusche@computerix.info Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2671 Fixes: efa4c4df864e ("drm/amd/display: call remove_stream_from_ctx from res_pool funcs") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amdgpu: fix possible UAF in amdgpu_cs_pass1()Alex Deucher
Since the gang_size check is outside of chunk parsing loop, we need to reset i before we free the chunk data. Suggested by Ye Zhang (@VAR10CK) of Baidu Security. Reviewed-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-08-09x86/CPU/AMD: Do not leak quotient data after a division by 0Borislav Petkov (AMD)
Under certain circumstances, an integer division by 0 which faults, can leave stale quotient data from a previous division operation on Zen1 microarchitectures. Do a dummy division 0/1 before returning from the #DE exception handler in order to avoid any leaks of potentially sensitive data. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-09drm/amd/pm: Fix SMU v13.0.6 energy reportingLijo Lazar
Energy counter should be reported in units of 15.259 uJ. Don't apply any conversion. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: check attr flag before set cursor degamma on DCN3+Melissa Wen
Don't set predefined degamma curve to cursor plane if the cursor attribute flag is not set. Applying a degamma curve to the cursor by default breaks userspace expectation. Checking the flag before performing any color transformation prevents too dark cursor gamma in DCN3+ on many Linux desktop environment (KDE Plasma, GNOME, wlroots-based, etc.) as reported at: - https://gitlab.freedesktop.org/drm/amd/-/issues/1513 This is the same approach followed by DCN2 drivers where the issue is not present. Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-08-09drm/amd/pm: disable the SMU13 OD feature support temporarilyEvan Quan
The existing OD interface cannot support the growing demand for more OD features. We are in the transition to a new OD mechanism. So, disable the SMU13 OD feature support temporarily. And this should be reverted when the new OD mechanism online. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/pm: correct the pcie width for smu 13.0.0Kenneth Feng
correct the pcie width value in pp_dpm_pcie for smu 13.0.0 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-08-09drm/amd/display: Don't show stack trace for missing eDPMario Limonciello
Some systems are only connected by HDMI or DP, so warning related to missing eDP is unnecessary. Downgrade to debug instead. Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Fixes: 6d9b6dceaa51 ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()") Reported-by: Mastan.Katragadda@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-09-13 12:50:09 +0000