summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-04-04regulator: atc260x: Fix missing active_discharge_on settingAxel Lin
Without active_discharge_on setting, the SWITCH1 discharge enable control is always disabled. Fix it. Fixes: 3b15ccac161a ("regulator: Add regulator driver for ATC260x PMICs") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220403132235.123727-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04arm64: dts: meson: remove CPU opps below 1GHz for SM1 boardsChristian Hewitt
Amlogic SM1 devices experience CPU stalls and random board wedges when the system idles and CPU cores clock down to lower opp points. Recent vendor kernels include a change to remove 100-250MHz and other distro sources also remove the 500/667MHz points. Unless all 100-667Mhz opps are removed or the CPU governor forced to performance stalls are still observed, so let's remove them to improve stability and uptime. Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
2022-04-04arm64: dts: meson: remove CPU opps below 1GHz for G12B boardsChristian Hewitt
Amlogic G12B devices experience CPU stalls and random board wedges when the system idles and CPU cores clock down to lower opp points. Recent vendor kernels include a change to remove 100-250MHz and other distro sources also remove the 500/667MHz points. Unless all 100-667Mhz opps are removed or the CPU governor forced to performance stalls are still observed, so let's remove them to improve stability and uptime. Fixes: b96d4e92709b ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points") Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
2022-04-04spi: mxic: Fix an error handling path in mxic_spi_probe()Christophe JAILLET
If spi_register_master() fails, we must undo a previous mxic_spi_mem_ecc_probe() call, as already done in the remove function. Fixes: 00360ebae483 ("spi: mxic: Add support for pipelined ECC operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/09c81f751241f6ec0bac7a48d4ec814a742e0d17.1648980664.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04spi: rpc-if: Fix RPM imbalance in probe error pathGeert Uytterhoeven
If rpcif_hw_init() fails, Runtime PM is left enabled. Fixes: b04cc0d912eb80d3 ("memory: renesas-rpc-if: Add support for RZ/G2L") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1c78a1f447d019bb66b6e7787f520ae78821e2ae.1648562287.git.geert+renesas@glider.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: rtq2134: Fix missing active_discharge_on settingAxel Lin
The active_discharge_on setting was missed, so output discharge resistor is always disabled. Fix it. Fixes: 0555d41497de ("regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC") Signed-off-by: Axel Lin <axel.lin@ingics.com> Link: https://lore.kernel.org/r/20220404022514.449231-1-axel.lin@ingics.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04regulator: wm8994: Add an off-on delay for WM8994 variantJonathan Bakker
As per Table 130 of the wm8994 datasheet at [1], there is an off-on delay for LDO1 and LDO2. In the wm8958 datasheet [2], I could not find any reference to it. I could not find a wm1811 datasheet to double-check there, but as no one has complained presumably it works without it. This solves the issue on Samsung Aries boards with a wm8994 where register writes fail when the device is powered off and back-on quickly. [1] https://statics.cirrus.com/pubs/proDatasheet/WM8994_Rev4.6.pdf [2] https://statics.cirrus.com/pubs/proDatasheet/WM8958_v3.5.pdf Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/CY4PR04MB056771CFB80DC447C30D5A31CB1D9@CY4PR04MB0567.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-04gpu: ipu-v3: Fix dev_dbg frequency outputLeo Ruan
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%. Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz Signed-off-by: Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220207151411.5009-1-mark.jonas@de.bosch.com
2022-04-04drm/imx: dw_hdmi-imx: Fix bailout in error cases of probeLiu Ying
In dw_hdmi_imx_probe(), if error happens after dw_hdmi_probe() returns successfully, dw_hdmi_remove() should be called where necessary as bailout. Fixes: c805ec7eb210 ("drm/imx: dw_hdmi-imx: move initialization into probe") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220128091944.3831256-1-victor.liu@nxp.com
2022-04-04drm/imx: Fix memory leak in imx_pd_connector_get_modesJosé Expósito
Avoid leaking the display mode variable if of_get_drm_display_mode fails. Fixes: 76ecd9c9fb24 ("drm/imx: parallel-display: check return code from of_get_drm_display_mode()") Addresses-Coverity-ID: 1443943 ("Resource leak") Signed-off-by: José Expósito <jose.exposito89@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220108165230.44610-1-jose.exposito89@gmail.com
2022-04-04drm/imx: imx-ldb: Check for null pointer after calling kmemdupJiasheng Jiang
As the possible failure of the allocation, kmemdup() may return NULL pointer. Therefore, it should be better to check the return value of kmemdup() and return error if fails. Fixes: dc80d7038883 ("drm/imx-ldb: Add support to drm-bridge") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20220105074729.2363657-1-jiasheng@iscas.ac.cn
2022-04-04ARM: vexpress/spc: Avoid negative array index when !SMPKees Cook
When building multi_v7_defconfig+CONFIG_SMP=n, -Warray-bounds exposes a couple negative array index accesses: arch/arm/mach-vexpress/spc.c: In function 've_spc_clk_init': arch/arm/mach-vexpress/spc.c:583:21: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds] 583 | if (init_opp_table[cluster]) | ~~~~~~~~~~~~~~^~~~~~~~~ arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table' 556 | bool init_opp_table[MAX_CLUSTERS] = { false }; | ^~~~~~~~~~~~~~ arch/arm/mach-vexpress/spc.c:592:18: warning: array subscript -1 is below array bounds of 'bool[2]' {aka '_Bool[2]'} [-Warray-bounds] 592 | init_opp_table[cluster] = true; | ~~~~~~~~~~~~~~^~~~~~~~~ arch/arm/mach-vexpress/spc.c:556:7: note: while referencing 'init_opp_table' 556 | bool init_opp_table[MAX_CLUSTERS] = { false }; | ^~~~~~~~~~~~~~ Skip this logic when built !SMP. Link: https://lore.kernel.org/r/20220331190443.851661-1-keescook@chromium.org Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-04firmware: arm_scmi: Remove clear channel call on the TX channelCristian Marussi
On SCMI transports whose channels are based on a shared resource the TX channel area has to be acquired by the agent before placing the desired command into the channel and it will be then relinquished by the platform once the related reply has been made available into the channel. On an RX channel the logic is reversed with the platform acquiring the channel area and the agent reliquishing it once done by calling the scmi_clear_channel() helper. As a consequence, even in case of error, the agent must never try to clear a TX channel from its side: restrict the existing clear channel call on the the reply path only to delayed responses since they are indeed coming from the RX channel. Link: https://lore.kernel.org/r/20220224152404.12877-1-cristian.marussi@arm.com Fixes: e9b21c96181c ("firmware: arm_scmi: Make .clear_channel optional") Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2022-04-04video: fbdev: omap: Make it CCF clk API compatibleJanusz Krzysztofik
OMAP1 LCDC drivers now omit clk_prepare/unprepare() steps, not supported by OMAP1 custom implementation of clock API. However, non-CCF stubs of those functions exist for use on such platforms until converted to CCF. Update the drivers to be compatible with CCF implementation of clock API. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: aty/matrox/...: Prepare cleanup of powerpc's asm/prom.hChristophe Leroy
powerpc's asm/prom.h brings some headers that it doesn't need itself. In order to clean it up, first add missing headers in users of asm/prom.h Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: pm2fb: Fix a kernel-doc formatting issueHaowen Bai
This function had kernel-doc that not used a hash to separate the function name from the one line description. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04linux/fb.h: Spelling s/palette/palette/Geert Uytterhoeven
Fix a misspelling of "palette" in a comment. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: sis: fix potential NULL dereference in sisfb_post_sis300()Haowen Bai
Do no access bios[] if it's NULL. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: pxafb: use if else insteadWang Qing
use if and else instead of consequent if(A) and if (!A) Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: udlfb: properly check endpoint typePavel Skripkin
syzbot reported warning in usb_submit_urb, which is caused by wrong endpoint type. This driver uses out bulk endpoint for communication, so let's check if this endpoint is present and bail out early if not. Fail log: usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 4822 at drivers/usb/core/urb.c:493 usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 Modules linked in: CPU: 0 PID: 4822 Comm: kworker/0:3 Tainted: G W 5.13.0-syzkaller #0 ... Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xd27/0x1540 drivers/usb/core/urb.c:493 ... Call Trace: dlfb_submit_urb+0x89/0x160 drivers/video/fbdev/udlfb.c:1969 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a3/0x840 drivers/video/fbdev/udlfb.c:1110 dlfb_usb_probe.cold+0x113e/0x1f4a drivers/video/fbdev/udlfb.c:1732 usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 Fixes: 88e58b1a42f8 ("Staging: add udlfb driver") Reported-and-tested-by: syzbot+53ce4a4246d0fe0fee34@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04video: fbdev: of: display_timing: Remove a redundant zeroing of memoryChristophe JAILLET
of_parse_display_timing() already call memset(0) on its 2nd argument, so there is no need to clear it explicitly before calling this function. Use kmalloc() instead of kzalloc() to save a few cycles. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Helge Deller <deller@gmx.de>
2022-04-04cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platformsVladimir Zapolskiy
On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is obtained from another register REG_DOMAIN_STATE, thus the helper function qcom_lmh_get_throttle_freq() should be modified accordingly, as for now it returns gibberish since .reg_current_vote is unset for EPSS hardware. To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate in KHz. Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: provide online/offline operationsDmitry Baryshkov
Provide lightweight online and offline operations. This saves us from parsing and tearing down the OPP tables each time the CPU is put online or offline. Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: fix the opp entries refcountingDmitry Baryshkov
The qcom_lmh_dcvs_notify() will get the dev_pm_opp instance for throttling, but will not put it, ending up with leaking a reference count and the following backtrace when putting the CPU offline. Correctly put the reference count of the returned opp instance. [ 84.418025] ------------[ cut here ]------------ [ 84.422770] WARNING: CPU: 7 PID: 43 at drivers/opp/core.c:1396 _opp_table_kref_release+0x188/0x190 [ 84.431966] Modules linked in: [ 84.435106] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S 5.17.0-rc6-00388-g7cf3c0d89c44-dirty #721 [ 84.451631] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--) [ 84.458781] pc : _opp_table_kref_release+0x188/0x190 [ 84.463878] lr : _opp_table_kref_release+0x78/0x190 [ 84.468885] sp : ffff80000841bc70 [ 84.472294] x29: ffff80000841bc70 x28: ffff6664afe3d000 x27: ffff1db6729e5908 [ 84.479621] x26: 0000000000000000 x25: 0000000000000000 x24: ffff1db6729e58e0 [ 84.486946] x23: ffff8000080a5000 x22: ffff1db40aad80e0 x21: ffff1db4002fec80 [ 84.494277] x20: ffff1db40aad8000 x19: ffffb751c3186300 x18: ffffffffffffffff [ 84.501603] x17: 5300326563697665 x16: 645f676e696c6f6f x15: 00001186c1df5448 [ 84.508928] x14: 00000000000002e9 x13: 0000000000000000 x12: 0000000000000000 [ 84.516256] x11: ffffb751c3186368 x10: ffffb751c39a2a70 x9 : 0000000000000000 [ 84.523585] x8 : ffff1db4008edf00 x7 : ffffb751c328c000 x6 : 0000000000000001 [ 84.530916] x5 : 0000000000040000 x4 : 0000000000000001 x3 : ffff1db4008edf00 [ 84.538247] x2 : 0000000000000000 x1 : ffff1db400aa6100 x0 : ffff1db40aad80d0 [ 84.545579] Call trace: [ 84.548101] _opp_table_kref_release+0x188/0x190 [ 84.552842] dev_pm_opp_remove_all_dynamic+0x8c/0xc0 [ 84.557949] qcom_cpufreq_hw_cpu_exit+0x30/0xdc [ 84.562608] cpufreq_offline.isra.0+0x1b4/0x1d8 [ 84.567270] cpuhp_cpufreq_offline+0x10/0x6c [ 84.571663] cpuhp_invoke_callback+0x16c/0x2b0 [ 84.576231] cpuhp_thread_fun+0x190/0x250 [ 84.580353] smpboot_thread_fn+0x12c/0x230 [ 84.584568] kthread+0xfc/0x100 [ 84.587810] ret_from_fork+0x10/0x20 [ 84.591490] irq event stamp: 3482 [ 84.594901] hardirqs last enabled at (3481): [<ffffb751c13c3db0>] call_rcu+0x39c/0x50c [ 84.603119] hardirqs last disabled at (3482): [<ffffb751c236b518>] el1_dbg+0x24/0x8c [ 84.611074] softirqs last enabled at (310): [<ffffb751c1290410>] _stext+0x410/0x588 [ 84.619028] softirqs last disabled at (305): [<ffffb751c131bf68>] __irq_exit_rcu+0x158/0x174 [ 84.627691] ---[ end trace 0000000000000000 ]--- Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reported-by: kernel test robot <lkp@intel.com> Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: fix the race between LMH worker and cpuhpDmitry Baryshkov
The driver would disable the worker when cpu is being put offline, but it happens closer to the end of cpufreq_offline(). The function qcom_lmh_dcvs_poll() can be running in parallel with this, when policy->cpus already has been updated. Read policy->related_cpus instead. [ 37.122433] ------------[ cut here ]------------ [ 37.127225] WARNING: CPU: 0 PID: 187 at drivers/base/arch_topology.c:180 topology_update_thermal_pressure+0xec/0x100 [ 37.138098] Modules linked in: [ 37.141279] CPU: 0 PID: 187 Comm: kworker/0:3 Tainted: G S 5.17.0-rc6-00389-g37c83d0b8710-dirty #713 [ 37.158306] Workqueue: events qcom_lmh_dcvs_poll [ 37.163095] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 37.170278] pc : topology_update_thermal_pressure+0xec/0x100 [ 37.176131] lr : topology_update_thermal_pressure+0x20/0x100 [ 37.181977] sp : ffff800009b6bce0 [ 37.185402] x29: ffff800009b6bce0 x28: ffffd87abe92b000 x27: ffff04bd7292e205 [ 37.192792] x26: ffffd87abe930af8 x25: ffffd87abe94e4c8 x24: 0000000000000000 [ 37.200180] x23: ffff04bb01177018 x22: ffff04bb011770c0 x21: ffff04bb01177000 [ 37.207567] x20: ffff04bb0a419000 x19: 00000000000c4e00 x18: 0000000000000000 [ 37.214954] x17: 000000040044ffff x16: 004000b2b5503510 x15: 0000006aaa1326d2 [ 37.222333] x14: 0000000000000232 x13: 0000000000000001 x12: 0000000000000040 [ 37.229718] x11: ffff04bb00400000 x10: 968f57bd39f701c8 x9 : ffff04bb0acc8674 [ 37.237095] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffffd87abd90092c [ 37.244478] x5 : 0000000000000016 x4 : 0000000000000000 x3 : 0000000000000100 [ 37.251852] x2 : ffff04bb0a419020 x1 : 0000000000000100 x0 : 0000000000000100 [ 37.259235] Call trace: [ 37.261771] topology_update_thermal_pressure+0xec/0x100 [ 37.267266] qcom_lmh_dcvs_poll+0xbc/0x154 [ 37.271505] process_one_work+0x288/0x69c [ 37.275654] worker_thread+0x74/0x470 [ 37.279450] kthread+0xfc/0x100 [ 37.282712] ret_from_fork+0x10/0x20 [ 37.286417] irq event stamp: 74 [ 37.289664] hardirqs last enabled at (73): [<ffffd87abdd78af4>] _raw_spin_unlock_irq+0x44/0x80 [ 37.298632] hardirqs last disabled at (74): [<ffffd87abdd71fc0>] __schedule+0x710/0xa10 [ 37.306885] softirqs last enabled at (58): [<ffffd87abcc90410>] _stext+0x410/0x588 [ 37.314778] softirqs last disabled at (51): [<ffffd87abcd1bf68>] __irq_exit_rcu+0x158/0x174 [ 37.323386] ---[ end trace 0000000000000000 ]--- Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04cpufreq: qcom-hw: drop affinity hint before freeing the IRQDmitry Baryshkov
Drop affinity hint before freeing the throttling IRQ to fix the following trace: [ 185.114773] ------------[ cut here ]------------ [ 185.119517] WARNING: CPU: 7 PID: 43 at kernel/irq/manage.c:1887 free_irq+0x3a4/0x3dc [ 185.127474] Modules linked in: [ 185.130618] CPU: 7 PID: 43 Comm: cpuhp/7 Tainted: G S W 5.17.0-rc6-00386-g67382a5b705d-dirty #690 [ 185.147125] pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 185.154269] pc : free_irq+0x3a4/0x3dc [ 185.158031] lr : free_irq+0x33c/0x3dc [ 185.161792] sp : ffff80000841bc90 [ 185.165195] x29: ffff80000841bc90 x28: ffffa6edc5c3d000 x27: ffff6d93729e5908 [ 185.172515] x26: 0000000000000000 x25: ffff6d910109fc00 x24: ffff6d91011490e0 [ 185.179838] x23: ffff6d9101149218 x22: 0000000000000080 x21: 0000000000000000 [ 185.187163] x20: ffff6d9101149000 x19: ffff6d910ab61500 x18: ffffffffffffffff [ 185.194487] x17: 2e35202020202020 x16: 2020202020202020 x15: ffff80008841b9a7 [ 185.201805] x14: 00000000000003c9 x13: 0000000000000001 x12: 0000000000000040 [ 185.209135] x11: ffff6d91005aab58 x10: ffff6d91005aab5a x9 : ffffc6a5ad1c5408 [ 185.216455] x8 : ffff6d91005adb88 x7 : 0000000000000000 x6 : ffffc6a5ab5a91f4 [ 185.223776] x5 : 0000000000000000 x4 : ffff6d91011490a8 x3 : ffffc6a5ad266108 [ 185.231098] x2 : 0000000013033204 x1 : ffff6d9101149000 x0 : ffff6d910a9cc000 [ 185.238421] Call trace: [ 185.240932] free_irq+0x3a4/0x3dc [ 185.244334] qcom_cpufreq_hw_cpu_exit+0x78/0xcc [ 185.248985] cpufreq_offline.isra.0+0x228/0x270 [ 185.253639] cpuhp_cpufreq_offline+0x10/0x20 [ 185.258027] cpuhp_invoke_callback+0x16c/0x2b0 [ 185.262592] cpuhp_thread_fun+0x190/0x250 [ 185.266710] smpboot_thread_fn+0x12c/0x230 [ 185.270914] kthread+0xfc/0x100 [ 185.274145] ret_from_fork+0x10/0x20 [ 185.277820] irq event stamp: 212 [ 185.281136] hardirqs last enabled at (211): [<ffffc6a5ac57973c>] _raw_spin_unlock_irqrestore+0x8c/0xa0 [ 185.290775] hardirqs last disabled at (212): [<ffffc6a5ac572100>] __schedule+0x710/0xa10 [ 185.299081] softirqs last enabled at (0): [<ffffc6a5ab50f7b0>] copy_process+0x7d0/0x1a14 [ 185.307475] softirqs last disabled at (0): [<0000000000000000>] 0x0 Fixes: 3ed6dfbd3bb98 ("cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts") Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-04-04ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOsChristian Lamparter
Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with the a message: "READ LOG DMA EXT failed, trying PIO" during boot. Initially this was discovered because it caused a crash with the sata_dwc_460ex controller on a WD MyBook Live DUO. The reporter "Tice Rex" which has the unique opportunity that he has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q" which booted fine and didn't expose "READ LOG DMA EXT". But the newer/latest firmware "EXT0DB6Q" caused the headaches. BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-04ata: sata_dwc_460ex: Fix crash due to OOB writeChristian Lamparter
the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." Fixes: 28361c403683c ("libata: add extra internal command") Cc: stable@kernel.org # 4.18+ BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-04ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()Damien Le Moal
When returning false, ata_sff_altstatus() does not return any status value, resulting in a compilation warning in ata_sff_lost_interrupt() ("uninitialized symbol 'status'"). Fix this by initializing the local variable "status" to 0. Fixes: 03c0e84f9c1e ("ata: libata-sff: refactor ata_sff_altstatus()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-04-03io_uring: don't check req->file in io_fsync_prep()Jens Axboe
This is a leftover from the really old days where we weren't able to track and error early if we need a file and it wasn't assigned. Kill the check. Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-03Linux 5.18-rc1v5.18-rc1Linus Torvalds
2022-04-03Merge tag 'trace-v5.18-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
2022-04-03Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
2022-04-03Merge tag 'x86-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation
2022-04-03Merge tag 'core-urgent-2022-04-03' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
2022-04-03Merge tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
2022-04-03Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
2022-04-03KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.hMichael Ellerman
We recently introduced a usage of kvmhv_on_pseries() in powerpc.c, which causes a build error for ppc64_book3e_allmodconfig: arch/powerpc/kvm/powerpc.c:716:8: error: implicit declaration of function ‘kvmhv_on_pseries’ 716 | if (kvmhv_on_pseries()) { | ^~~~~~~~~~~~~~~~ Fix it by moving kvmhv_on_pseries() into kvm_ppc.h so that the stub version is available for book3e builds. Fixes: f771b55731fc ("KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2022-04-03selftests: net: fix nexthop warning cleanup double ip typoNikolay Aleksandrov
I made a stupid typo when adding the nexthop route warning selftest and added both $IP and ip after it (double ip) on the cleanup path. The error doesn't show up when running the test, but obviously it doesn't cleanup properly after it. Fixes: 392baa339c6a ("selftests: net: add delete nexthop route warning test") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-03docs: net: dsa: fix minor grammar and punctuation issuesBjorn Helgaas
Fix a few typos and minor grammatical issues. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-02Revert "clk: Drop the rate range on clk_put()"Stephen Boyd
This reverts commit 7dabfa2bc4803eed83d6f22bd6f045495f40636b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Reported-by: Tony Lindgren <tony@atomide.com> Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
2022-04-02Merge tag 'perf-tools-for-v5.18-2022-04-02' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
2022-04-02Merge tag 'kbuild-fixes-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
2022-04-02Merge tag 'mips_5.18_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - build fix for gpio - fix crc32 build problems - check for failed memory allocations * tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: crypto: Fix CRC32 code MIPS: rb532: move GPIOD definition into C-files MIPS: lantiq: check the return value of kzalloc() mips: sgi-ip22: add a check for the return of kzalloc()
2022-04-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: - Only do MSR filtering for MSRs accessed by rdmsr/wrmsr - Documentation improvements - Prevent module exit until all VMs are freed - PMU Virtualization fixes - Fix for kvm_irq_delivery_to_apic_fast() NULL-pointer dereferences - Other miscellaneous bugfixes * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits) KVM: x86: fix sending PV IPI KVM: x86/mmu: do compare-and-exchange of gPTE via the user address KVM: x86: Remove redundant vm_entry_controls_clearbit() call KVM: x86: cleanup enter_rmode() KVM: x86: SVM: fix tsc scaling when the host doesn't support it kvm: x86: SVM: remove unused defines KVM: x86: SVM: move tsc ratio definitions to svm.h KVM: x86: SVM: fix avic spec based definitions again KVM: MIPS: remove reference to trap&emulate virtualization KVM: x86: document limitations of MSR filtering KVM: x86: Only do MSR filtering when access MSR by rdmsr/wrmsr KVM: x86/emulator: Emulate RDPID only if it is enabled in guest KVM: x86/pmu: Fix and isolate TSX-specific performance event logic KVM: x86: mmu: trace kvm_mmu_set_spte after the new SPTE was set KVM: x86/svm: Clear reserved bits written to PerfEvtSeln MSRs KVM: x86: Trace all APICv inhibit changes and capture overall status KVM: x86: Add wrappers for setting/clearing APICv inhibits KVM: x86: Make APICv inhibit reasons an enum and cleanup naming KVM: X86: Handle implicit supervisor access with SMAP KVM: X86: Rename variable smap to not_smap in permission_fault() ...
2022-04-03modpost: restore the warning message for missing symbol versionsMasahiro Yamada
This log message was accidentally chopped off. I was wondering why this happened, but checking the ML log, Mark precisely followed my suggestion [1]. I just used "..." because I was too lazy to type the sentence fully. Sorry for the confusion. [1]: https://lore.kernel.org/all/CAK7LNAR6bXXk9-ZzZYpTqzFqdYbQsZHmiWspu27rtsFxvfRuVA@mail.gmail.com/ Fixes: 4a6795933a89 ("kbuild: modpost: Explicitly warn about unprototyped symbols") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-04-02Merge tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver fix from Jens Axboe: "Got two reports on nbd spewing warnings on load now, which is a regression from a commit that went into your tree yesterday. Revert the problematic change for now" * tag 'for-5.18/drivers-2022-04-02' of git://git.kernel.dk/linux-block: Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"
2022-04-02Merge tag 'pci-v5.18-changes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: - Fix Hyper-V "defined but not used" build issue added during merge window (YueHaibing) * tag 'pci-v5.18-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hv: Remove unused hv_set_msi_entry_from_desc()
2022-04-02Merge tag 'tag-chrome-platform-for-v5.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros_ec_typec: - Check for EC device - Fix a crash when using the cros_ec_typec driver on older hardware not capable of typec commands - Make try power role optional - Mux configuration reorganization series from Prashant cros_ec_debugfs: - Fix use after free. Thanks Tzung-bi sensorhub: - cros_ec_sensorhub fixup - Split trace include file misc: - Add new mailing list for chrome-platform development: chrome-platform@lists.linux.dev Now with patchwork!" * tag 'tag-chrome-platform-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_debugfs: detach log reader wq from devm platform: chrome: Split trace include file platform/chrome: cros_ec_typec: Update mux flags during partner removal platform/chrome: cros_ec_typec: Configure muxes at start of port update platform/chrome: cros_ec_typec: Get mux state inside configure_mux platform/chrome: cros_ec_typec: Move mux flag checks platform/chrome: cros_ec_typec: Check for EC device platform/chrome: cros_ec_typec: Make try power role optional MAINTAINERS: platform-chrome: Add new chrome-platform@lists.linux.dev list
2022-04-02Revert "nbd: fix possible overflow on 'first_minor' in nbd_dev_add()"Jens Axboe
This reverts commit 6d35d04a9e18990040e87d2bbf72689252669d54. Both Gabriel and Borislav report that this commit casues a regression with nbd: sysfs: cannot create duplicate filename '/dev/block/43:0' Revert it before 5.18-rc1 and we'll investigage this separately in due time. Link: https://lore.kernel.org/all/YkiJTnFOt9bTv6A2@zn.tnic/ Reported-by: Gabriel L. Somlo <somlo@cmu.edu> Reported-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit (git 2.34.1) at 2025-09-20 21:49:56 +0000