| Age | Commit message (Collapse) | Author |
|---|
|
Merge series from Jonas Rebmann <jre@pengutronix.de>:
The i.MX SPI controller supports inserting a configurable delay between
subsequent words, which is needed for some slower devices that couldn't
keep up otherwise.
This patch series introduces support for the word delay parameters for
i.MX51 onwards.
The SPI clock (CSRC=0) was chosen as the clock source over the also
available 32.768 KHz Low-Frequency Reference Clock (CSRC=1). The sample
period control bits (SAMPLE_PERIOD) are set to the selected word delay
converted to SPI clock cycles. A deviation from the requested number of
wait cycles and the actual word delay was observed via both software
timings and oscilloscope measurements and accounted for.
The Chip Select Delay Control bits in the Sample Period Control Register
remain zero.
Behaviour on i.MX35 and earlier, where the CSPI interface is used,
remains unchanged.
|
|
When queueing a set element add or removal operation to the transaction
log, check if the previous operation already asks for a the identical
operation on the same set.
If so, store the element reference in the preceding operation.
This significantlty reduces memory consumption when many set add/delete
operations appear in a single transaction.
Example: 10k elements require 937kb of memory (10k allocations from
kmalloc-96 slab).
Assuming we can compact 4 elements in the same set, 468 kbytes
are needed (64 bytes for base struct, nft_trans_elemn, 32 bytes
for nft_trans_one_elem structure, so 2500 allocations from kmalloc-192
slab).
For large batch updates we can compact up to 62 elements
into one single nft_trans_elem structure (~65% mem reduction):
(64 bytes for base struct, nft_trans_elem, 32 byte for nft_trans_one_elem
struct).
We can halve size of nft_trans_one_elem struct by moving
timeout/expire/update_flags into a dynamically allocated structure,
this allows to store 124 elements in a 2k slab nft_trans_elem struct.
This is done in a followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nftables audit log format emits the number of added/deleted rules, sets,
set elements and so on, to userspace:
table=t1 family=2 entries=4 op=nft_register_set
~~~~~~~~~
At this time, the 'entries' key is the number of transactions that will
be applied.
The upcoming set element compression will coalesce subsequent
adds/deletes to the same set requests in the same transaction
request to conseve memory.
Without this patch, we'd under-report the number of altered elements.
Increment the audit counter by the number of elements to keep the reported
entries value the same.
Without this, nft_audit.sh selftest fails because the recorded
(expected) entries key is smaller than the expected one.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add helpers to release the individual elements contained in the
trans_elem container structure.
No functional change intended.
Followup patch will add 'nelems' member and will turn 'priv' into
a flexible array.
These helpers can then loop over all elements.
Care needs to be taken to handle a mix of new elements and existing
elements that are being updated (e.g. timeout refresh).
Before this patch, NEWSETELEM transaction with update is released
early so nft_trans_set_elem_destroy() won't get called, so we need
to skip elements marked as update.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add and use a wrapper to append trans_elem structures to the
transaction log.
Unlike the existing helper, pass a gfp_t to indicate if sleeping
is allowed.
This will be used by a followup patch to realloc nft_trans_elem
structures after they gain a flexible array member to reduce
number of such container structures on the transaction list.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Both gcc-14 and clang-18 report that passing a non-string literal as the
format argument of request_module() is potentially insecure.
E.g. clang-18 says:
.../nf_bpf_link.c:46:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
46 | err = request_module(mod);
| ^~~
.../kmod.h:25:55: note: expanded from macro 'request_module'
25 | #define request_module(mod...) __request_module(true, mod)
| ^~~
.../nf_bpf_link.c:46:24: note: treat the string as an argument to avoid this
46 | err = request_module(mod);
| ^
| "%s",
.../kmod.h:25:55: note: expanded from macro 'request_module'
25 | #define request_module(mod...) __request_module(true, mod)
| ^
It is always the case where the contents of mod is safe to pass as the
format argument. That is, in my understanding, it never contains any
format escape sequences.
But, it seems better to be safe than sorry. And, as a bonus, compiler
output becomes less verbose by addressing this issue as suggested by
clang-18.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The nftables batch processing does not currently populate extack with
policy errors. Fix this by passing extack when parsing batch messages.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
|
|
Use DEFINE_FREE() to define a __free function for dropping thermal
zone template reference counters and use it along with __free() to
simplify code in some places.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4628747.LvFx2qVVIh@rjwysocki.net
[ rjw: Add variable initialization to address compiler warning ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a tdc test case to exercise the just-fixed systematic leak of
IDR entries in u32 hnode disposal. Given the IDR in question is
confined to the range [1..0x7FF], it is sufficient to create/delete
the same filter 2048 times to fill it up and get a nonzero exit
status from "tc filter add".
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The function strncpy is deprecated since it does not guarantee the
destination buffer is NULL terminated. Recommended replacement is
strscpy. The padded version was used to remain consistent with the other
strscpy_pad usage in the modified function.
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Wait for the command transmission to be completed in the DSI transfer
function polling for the dc_start bit to go back to idle state after the
transmission is started.
This is documented in the datasheet and failures to do so lead to
commands corruption.
Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240926141246.48282-1-francesco@dolcini.it
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240926141246.48282-1-francesco@dolcini.it
|
|
Hangbin Liu says:
====================
bonding: fix ns targets not work on hardware NIC
The first patch fixed ns targets not work on hardware NIC when bonding
set arp_validate.
The second patch add a related selftest for bonding.
v4: Thanks Nikolay for the comments:
use bond_slave_ns_maddrs_{add/del} with clear name
fix comments typos
remove _slave_set_ns_maddrs underscore directly
update bond_option_arp_validate_set() change logic
v3: use ndisc_mc_map to convert the mcast mac address (Jay Vosburgh)
v2: only add/del mcast group on backup slaves when arp_validate is set (Jay Vosburgh)
arp_validate doesn't support 3ad, tlb, alb. So let's only do it on ab mode.
====================
Link: https://patch.msgid.link/20241111101650.27685-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add a test to make sure the backup slaves join correct multicast group
when arp_validate enabled and ns_ip6_target is set. Here is the result:
TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ]
TEST: arp_validate (join mcast group) [ OK ]
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit 4598380f9c54 ("bonding: fix ns validation on backup slaves")
tried to resolve the issue where backup slaves couldn't be brought up when
receiving IPv6 Neighbor Solicitation (NS) messages. However, this fix only
worked for drivers that receive all multicast messages, such as the veth
interface.
For standard drivers, the NS multicast message is silently dropped because
the slave device is not a member of the NS target multicast group.
To address this, we need to make the slave device join the NS target
multicast group, ensuring it can receive these IPv6 NS messages to validate
the slave’s status properly.
There are three policies before joining the multicast group:
1. All settings must be under active-backup mode (alb and tlb do not support
arp_validate), with backup slaves and slaves supporting multicast.
2. We can add or remove multicast groups when arp_validate changes.
3. Other operations, such as enslaving, releasing, or setting NS targets,
need to be guarded by arp_validate.
Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The is_mgtime test checks whether the FS_MGTIME flag is set in the
fstype. To get there from the inode though, we have to dereference 3
pointers.
Add a new IOP_MGTIME flag, and have inode_init_always() set that flag
when the fstype flag is set. Then, make is_mgtime test for IOP_MGTIME
instead.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20241113-mgtime-v1-1-84e256980e11@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It literally directly follows a spin_lock() call.
This whacks an explicit barrier on x86-64.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241113155103.4194099-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Previously any PMU overflow interrupt that fired while a VCPU was
loaded was recorded as a guest event whether it truly was or not. This
resulted in nonsense perf recordings that did not honor
perf_event_attr.exclude_guest and recorded guest IPs where it should
have recorded host IPs.
Rework the sampling logic to only record guest samples for events with
exclude_guest = 0. This way any host-only events with exclude_guest
set will never see unexpected guest samples. The behaviour of events
with exclude_guest = 0 is unchanged.
Note that events configured to sample both host and guest may still
misattribute a PMI that arrived in the host as a guest event depending
on KVM arch and vendor behavior.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-6-coltonlewis@google.com
|
|
Break the assignment logic for misc flags into their own respective
functions to reduce the complexity of the nested logic.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-5-coltonlewis@google.com
|
|
Make sure PowerPC uses the arch-specific function now that those have
been reorganized.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-4-coltonlewis@google.com
|
|
For clarity, rename the arch-specific definitions of these functions
to perf_arch_* to denote they are arch-specifc. Define the
generic-named functions in one place where they can call the
arch-specific ones as needed.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20241113190156.2145593-3-coltonlewis@google.com
|
|
For ARM's implementation, perf_instruction_pointer() and
perf_misc_flags() are equivalent to the generic versions in
include/linux/perf_event.h so arch/arm doesn't need to provide its
own versions. Drop them here.
Signed-off-by: Colton Lewis <coltonlewis@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241113190156.2145593-2-coltonlewis@google.com
|
|
The first PPS latch time needs to be calculated by the driver
(in rounded off seconds) and configured as the start time
offset for the cycle. After synchronizing two PTP clocks
running as master/slave, missing this would cause master
and slave to start immediately with some milliseconds
drift which causes the PPS signal to never synchronize with
the PTP master.
Fixes: 186734c15886 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20241111095842.478833-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
A kernel test robot detected a missing error code:
qmc.c:1942 qmc_probe() warn: missing error code 'ret'
Indeed, the error returned by platform_get_irq() is checked and the
operation is aborted in case of failure but the ret error code is
not set in that case.
Set the ret error code.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202411051350.KNy6ZIWA-lkp@intel.com/
Fixes: 3178d58e0b97 ("soc: fsl: cpm1: Add support for QMC")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241105145623.401528-1-herve.codina@bootlin.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
of_find_compatible_node() requires a call to of_node_put() when the
pointer to the node is not required anymore to decrement its refcount
and avoid leaking memory.
Add the missing call to of_node_put() after the node has been used.
Cc: stable@vger.kernel.org
Fixes: e95f287deed2 ("soc: fsl: handle RCPM errata A-008646 on SoC LS1021A")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20241013-rcpm-of_node_put-v1-1-9a8e55a01eae@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
The non-scoped variant of this macro turns error-prone as soon as error
paths are included, because explicit calls to of_node_put() are required
to avoid leaking memory.
Using its scoped counterpart simplifies the code by removing the need of
explicit calls to of_node_put(), as they are automatically triggered as
soon as the child node goes out of scope. Moreover, it is more robust as
it accounts for new error paths without having to worry about
decrementing the object's refcount.
Note that the device_node is declared within the macro, and its explicit
declaration can be dropped as well if it is not used anywhere else.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20241002-tsa-scoped-v1-1-ba6a6d657f82@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
Error handling is missing when call to nla_put_u32() fails.
Handle the error when the call to nla_put_u32() returns an error.
The error was reported by Coverity Scan.
Report:
CID 1601525: (#1 of 1): Unused value (UNUSED_VALUE)
returned_value: Assigning value from nla_put_u32(skb, XFRMA_SA_PCPU, x->pcpu_num)
to err here, but that stored value is overwritten before it can be used
Fixes: 1ddf9916ac09 ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The 'vmw_user_object_buffer' function may return NULL with incorrect
inputs. To avoid possible null pointer dereference, add a check whether
the 'bo' is NULL in the vmw_framebuffer_surface_create_handle.
Fixes: d6667f0ddf46 ("drm/vmwgfx: Fix handling of dumb buffers")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241029083429.1185479-1-chenridong@huaweicloud.com
|
|
Tristram Ha says:
====================
net: dsa: microchip: Add LAN9646 switch support
This series of patches is to add LAN9646 switch support to the KSZ DSA
driver.
====================
Link: https://patch.msgid.link/20241109015705.82685-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has
4 internal PHYs and 1 SGMII port. The chip id read from hardware is
same as KSZ9477, so software driver needs to create a new chip id and
group allowable functions under its chip data structure to
differentiate the product.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Link: https://patch.msgid.link/20241109015705.82685-3-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
LAN9646 switch is a 6-port switch with functions like KSZ9897. It has
4 internal PHYs and 1 SGMII port.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241109015705.82685-2-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the clock dwmac->tx_clk was not enabled in intel_eth_plat_probe,
it should not be disabled in any path.
Conversely, if it was enabled in intel_eth_plat_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Link: https://patch.msgid.link/20241108173334.2973603-1-mordan@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
copy_safe_from_sockptr()
return copy_from_sockptr()
return copy_from_sockptr_offset()
return copy_from_user()
copy_from_user() does not return an error on fault. Instead, it returns a
number of bytes that were not copied. Have it handled.
Patch has a side effect: it un-breaks garbage input handling of
nfc_llcp_setsockopt() and mISDN's data_sock_setsockopt().
Fixes: 6309863b31dd ("net: add copy_safe_from_sockptr() helper")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20241111-sockptr-copy-ret-fix-v1-1-a520083a93fb@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mediatek,mac-wol property is being handled backwards to what is
described in the binding: it currently enables PHY WOL when the property
is present and vice versa. Invert the driver logic so it matches the
binding description.
Fixes: fd1d62d80ebc ("net: stmmac: replace the use_phy_wol field with a flag")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20241109-mediatek-mac-wol-noninverted-v2-1-0e264e213878@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Accessing `mr_table->mfc_cache_list` is protected by an RCU lock. In the
following code flow, the RCU read lock is not held, causing the
following error when `RCU_PROVE` is not held. The same problem might
show up in the IPv6 code path.
6.12.0-rc5-kbuilder-01145-gbac17284bdcb #33 Tainted: G E N
-----------------------------
net/ipv4/ipmr_base.c:313 RCU-list traversed in non-reader section!!
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by RetransmitAggre/3519:
#0: ffff88816188c6c0 (nlk_cb_mutex-ROUTE){+.+.}-{3:3}, at: __netlink_dump_start+0x8a/0x290
#1: ffffffff83fcf7a8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_dumpit+0x6b/0x90
stack backtrace:
lockdep_rcu_suspicious
mr_table_dump
ipmr_rtm_dumproute
rtnl_dump_all
rtnl_dumpit
netlink_dump
__netlink_dump_start
rtnetlink_rcv_msg
netlink_rcv_skb
netlink_unicast
netlink_sendmsg
This is not a problem per see, since the RTNL lock is held here, so, it
is safe to iterate in the list without the RCU read lock, as suggested
by Eric.
To alleviate the concern, modify the code to use
list_for_each_entry_rcu() with the RTNL-held argument.
The annotation will raise an error only if RTNL or RCU read lock are
missing during iteration, signaling a legitimate problem, otherwise it
will avoid this false positive.
This will solve the IPv6 case as well, since ip6mr_rtm_dumproute() calls
this function as well.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241108-ipmr_rcu-v2-1-c718998e209b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the pktgen_sample01_simple.sh script, the device variable is uppercase
'DEV' instead of lowercase 'dev'. Because of this typo, the script cannot
enable UDP tx checksum.
Fixes: 460a9aa23de6 ("samples: pktgen: add UDP tx checksum support")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20241112030347.1849335-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Normally, phylib won't notify changes in quick succession. However, as
a result of commit 3e43b903da04 ("net: phy: Immediately call
adjust_link if only tx_lpi_enabled changes") this is no longer true -
it is now possible that phy_link_down() and phy_link_up() will both
complete before phylink's resolver has run, which means it'll miss that
pl->phy_state.link momentarily became false.
Rename "mac_link_dropped" to be more generic "link_failed" since it will
cover more than the MAC/PCS end of the link failing, and arrange to set
this in phylink_phy_change() if we notice that the PHY reports that the
link is down.
This will ensure that we capture an EEE reconfiguration event.
Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/E1tAtcW-002RBS-LB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maxime Chevallier says:
====================
Support external snapshots on dwmac1000
The main change since v3 is the move of the fifo flush wait in the
ptp_clock_info enable() function within the mutex that protects the ptp
registers. Thanks Jakub and Paolo for spotting this.
This series also aggregates Daniel's reviews, except for the patch 4
which was modified since then.
This series is another take on the previous work [1] done by
Alexis Lothoré, that fixes the support for external snapshots
timestamping in GMAC3-based devices.
Details on why this is needed are mentionned on the cover [2] from V1.
[1]: https://lore.kernel.org/netdev/20230616100409.164583-1-alexis.lothore@bootlin.com/
[2]: https://lore.kernel.org/netdev/20241029115419.1160201-1-maxime.chevallier@bootlin.com/
Link to V1: https://lore.kernel.org/netdev/20241029115419.1160201-1-maxime.chevallier@bootlin.com/
Link to V2: https://lore.kernel.org/netdev/20241104170251.2202270-1-maxime.chevallier@bootlin.com/
Link to V3: https://lore.kernel.org/netdev/20241106090331.56519-1-maxime.chevallier@bootlin.com/
====================
Link: https://patch.msgid.link/20241112170658.2388529-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Indicate that dwmac_socfpga has a gmac. This will make sure that
gmac-specific interrupt processing is done, including timestamp
interrupt handling. Without this, the external snapshot interrupt is
never ack'd and we have an interrupt storm on external snapshot event.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-10-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP_TCR (Timestamp Control Register) is used to configure several
features related to packet timestamping.
On one hand, it configures the 1588 packet processing, to indicate what
types of frames should be timestamped (all, only 1588v1 or 1588v2, using
L2 or L4 timestamping, on IPv4 or IPv6, etc.). This is congfigured
usually through the ioctl / ndo dedicated for such setup. This
configuration is done by setting some fields in that register, that seem
to behave the same way on all dwmac variants, including DWMAC1000.
On the other hand, and only on DWMAC1000 apparently, some fields in that
register are used to configure external snapshots (bits 24/25).
On DWMAC4 and others, these fields are reserved and external
snapshots are configured through a dedicated register that simply
doesn't seem to exist on DWMAC1000.
This configuration is done in the dwmac1000-specific ptp_clock_info ops
(cf dwmac1000_ptp_enable()).
So to avoid the timestamping configuration interfering with the external
snapshots, this commit makes sure that the config_hw_tstamping only
configures the relevant bits in PTP_TCR, so that the DWMAC1000
timestamping can correctly rely on these otherwise reserved fields.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-9-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stmmac_ptp code doesn't need the dwmac4 register definitions, remove
the inclusion.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-8-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The default configuration for the interrupts on dwmac1000 have the
timestamping interrupt masked. Now that the timestamping has been
adapted to dwmac1000, enable the timestamping interrupt on these
platforms.
On dwmac1000, the external snapshot interrupt is configured through a
dedicated bit, that is set as reserved on other dwmac variants. The
timestaming interrupt is acknowledged by reading the
GMAC3_X_TIMESTAMP_STATUS register.
Make sure that this interrupt is enabled when snapshot is enabled, and
masked when disabled.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-7-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In GMAC3_X, the timestamping configuration differs from GMAC4 in the
layout of the registers accessed to grab the number of snapshots in FIFO
as well as the register offset to grab the aux snapshot timestamp.
Introduce dedicated ops to configure timestamping on dwmac100 and
dwmac1000. The latency correction doesn't seem to exist on GMAC3, so its
corresponding operation isn't populated.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-6-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP configuration for GMAC3_X differs from the other implementations
in several ways :
- There's only one external snapshot trigger
- The snapshot configuration is done through the PTP_TCR register,
whereas the other dwmac variants have a dedicated ACR (auxiliary
control reg) for that purpose
- The layout for the PTP_TCR register also differs, as bits 24/25 are
used for the snapshot configuration. These bits are reserved on other
variants.
On GMAC3_X, we also can't discover the number of snapshot triggers
automatically.
The GMAC3_X has one PPS output, however it's configuration isn't
supported yet so report 0 n_per_out for now.
Introduce a dedicated set of ptp_clock_info ops and configuration
parameters to reflect these differences specific to GMAC3_X.
This was tested on dwmac_socfpga.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-5-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some DWMAC variants such as dwmac1000 don't support discovering the
number of output pps and auxiliary snapshots. Allow these parameters to
be defined in default ptp_clock_info, and let them be updated only when
the feature discovery yielded a result.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The auxiliary snapshot configuration was found to differ depending on
the dwmac version. To prepare supporting this, allow specifying the
ptp_clock_info ops in the hwif array
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stmmac_ptp_clock_ops are copied into the stmmac_priv structure
before being registered to the PTP core. Some adjustments are made prior
to that, such as the number of snapshots or max adjustment parameters.
Instead of modifying the global definition, then copying into the local
private data, let's first copy then modify the local parameters.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: pm: a few more fixes
Three small fixes related to the MPTCP path-manager:
- Patch 1: correctly reflect the backup flag to the corresponding local
address entry of the userspace path-manager. A fix for v5.19.
- Patch 2: hold the PM lock when deleting an entry from the local
addresses of the userspace path-manager to avoid messing up with this
list. A fix for v5.19.
- Patch 3: use _rcu variant to iterate the in-kernel path-manager's
local addresses list, when under rcu_read_lock(). A fix for v5.17.
====================
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-0-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When traversing userspace_pm_local_addr_list and deleting an entry from
it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held.
This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id()
and releases it after list_move() in mptcp_pm_nl_remove_doit().
Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
