| Age | Commit message (Collapse) | Author |
|---|
|
Miroslav reported that the periodic RTC synchronization in the NTP code
fails more often than not to hit the specified update window.
The reason is that the code uses delayed_work to schedule the update which
needs to be in thread context as the underlying RTC might be connected via
a slow bus, e.g. I2C. In the update function it verifies whether the
current time is correct vs. the requirements of the underlying RTC.
But delayed_work is using the timer wheel for scheduling which is
inaccurate by design. Depending on the distance to the expiry the wheel
gets less granular to allow batching and to avoid the cascading of the
original timer wheel. See 500462a9de65 ("timers: Switch to a non-cascading
wheel") and the code for further details.
The code already deals with this by splitting the 660 seconds period into a
long 659 seconds timer and then retrying with a smaller delta.
But looking at the actual granularities of the timer wheel (which depend on
the HZ configuration) the 659 seconds timer ends up in an outer wheel level
and is affected by a worst case granularity of:
HZ Granularity
1000 32s
250 16s
100 40s
So the initial timer can be already off by max 12.5% which is not a big
issue as the period of the sync is defined as ~11 minutes.
The fine grained second attempt schedules to the desired update point with
a timer expiring less than a second from now. Depending on the actual delta
and the HZ setting even the second attempt can end up in outer wheel levels
which have a large enough granularity to make the correctness check fail.
As this is a fundamental property of the timer wheel there is no way to
make this more accurate short of iterating in one jiffies steps towards the
update point.
Switch it to an hrtimer instead which schedules the actual update work. The
hrtimer will expire precisely (max 1 jiffie delay when high resolution
timers are not available). The actual scheduling delay of the work is the
same as before.
The update is triggered from do_adjtimex() which is a bit racy but not much
more racy than it was before:
if (ntp_synced())
queue_delayed_work(system_power_efficient_wq, &sync_work, 0);
which is racy when the work is currently executed and has not managed to
reschedule itself.
This becomes now:
if (ntp_synced() && !hrtimer_is_queued(&sync_hrtimer))
queue_work(system_power_efficient_wq, &sync_work, 0);
which is racy when the hrtimer has expired and the work is currently
executed and has not yet managed to rearm the hrtimer.
Not a big problem as it just schedules work for nothing.
The new implementation has a safe guard in place to catch the case where
the hrtimer is queued on entry to the work function and avoids an extra
update attempt of the RTC that way.
Reported-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220542.062910520@linutronix.de
|
|
The offset which is used to steer the start of an RTC synchronization
update via rtc_set_ntp_time() is huge. The math behind this is:
tsched twrite(t2.tv_sec - 1) t2 (seconds increment)
twrite - tsched is the transport time for the write to hit the device.
t2 - twrite depends on the chip and is for most chips one second.
The rtc_set_ntp_time() calculation of tsched is:
tsched = t2 - 1sec - (t2 - twrite)
The default for the sync offset is 500ms which means that twrite - tsched
is 500ms assumed that t2 - twrite is one second.
This is 0.5 seconds off for RTCs which are directly accessible by IO writes
and probably for the majority of i2C/SPI based RTC off by an order of
magnitude. Set it to 5ms which should bring it closer to reality.
The default can be adjusted by drivers (rtc_cmos does so) and could be
adjusted further by a calibration method which is an orthogonal problem.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220541.960333166@linutronix.de
|
|
The offset for rtc_cmos must be -500ms to work correctly with the current
implementation of rtc_set_ntp_time() due to the following:
tsched twrite(t2.tv_sec - 1) t2 (seconds increment)
twrite - tsched is the transport time for the write to hit the device,
which is negligible for this chip because it's accessed directly.
t2 - twrite = 500ms according to the datasheet.
But rtc_set_ntp_time() calculation of tsched is:
tsched = t2 - 1sec - (t2 - twrite)
The default for the sync offset is 500ms which means that the write happens
at t2 - 1.5 seconds which is obviously off by a second for this device.
Make the offset -500ms so it works correct.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220541.830517160@linutronix.de
|
|
No need to hold the lock and disable interrupts for doing math.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220541.709243630@linutronix.de
|
|
The MC146818 driver is prone to read garbage from the RTC. There are
several issues all related to the update cycle of the MC146818. The chip
increments seconds obviously once per second and indicates that by a bit in
a register. The bit goes high 244us before the actual update starts. During
the update the readout of the time values is undefined.
The code just checks whether the update in progress bit (UIP) is set before
reading the clock. If it's set it waits arbitrary 20ms before retrying,
which is ample because the maximum update time is ~2ms.
But this check does not guarantee that the UIP bit goes high and the actual
update happens during the readout. So the following can happen
0.997 UIP = False
-> Interrupt/NMI/preemption
0.998 UIP -> True
0.999 Readout <- Undefined
To prevent this rework the code so it checks UIP before and after the
readout and if set after the readout try again.
But that's not enough to cover the following:
0.997 UIP = False
Readout seconds
-> NMI (or vCPU scheduled out)
0.998 UIP -> True
update completes
UIP -> False
1.000 Readout minutes,....
UIP check succeeds
That can make the readout wrong up to 59 seconds.
To prevent this, read the seconds value before the first UIP check,
validate it after checking UIP and after reading out the rest.
It's amazing that the original i386 code had this actually correct and
the generic implementation of the MC146818 driver got it wrong in 2002 and
it stayed that way until today.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201206220541.594826678@linutronix.de
|
|
idle_balance() has been renamed to newidle_balance(). To differentiate
with nohz_idle_balance, it seems refining the comment will be helpful
for the readers of the code.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201202220641.22752-1-song.bao.hua@hisilicon.com
|
|
The clearing of SMT siblings from the SIS mask before checking for an idle
core is a small but unnecessary cost. Defer the clearing of the siblings
until the scan moves to the next potential target. The cost of this was
not measured as it is borderline noise but it should be self-evident.
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20201130144020.GS3371@techsingularity.net
|
|
Kernel-doc requires that a kernel-doc markup to be immediately
below the function prototype, as otherwise it will rename it.
So, move sys_sched_yield() markup to the right place.
Also fix the cpu_util() markup: Kernel-doc markups
should use this format:
identifier - description
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/50cd6f460aeb872ebe518a8e9cfffda2df8bdb0a.1606823973.git.mchehab+huawei@kernel.org
|
|
The value freq_max/freq_base is a fundamental component of frequency
invariance calculations. It may come from a variety of sources such as MSRs
or ACPI data, tracking it down when troubleshooting a system could be
non-trivial. It is worth saving it in the kernel logs.
# dmesg | grep 'Estimated ratio of average max'
[ 14.024036] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1289
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201112182614.10700-4-ggherdovich@suse.cz
|
|
AMD EPYC
Frequency invariant accounting calculations need the ratio
freq_curr/freq_max, but freq_max is unknown as it depends on dynamic power
allocation between cores: AMD EPYC CPUs implement "Core Performance Boost".
Three candidates are considered to estimate this value:
- maximum non-boost frequency
- maximum boost frequency
- the mid point between the above two
Experimental data on an AMD EPYC Zen2 machine slightly favors the third
option, which is applied with this patch.
The analysis uses the ondemand cpufreq governor as baseline, and compares
it with schedutil in a number of configurations. Using the freq_max value
described above offers a moderate advantage in performance and efficiency:
sugov-max (freq_max=max_boost) performs the worst on tbench: less
throughput and reduced efficiency than the other invariant-schedutil
options (see "Data Overview" below). Consider that tbench is generally a
problematic case as no schedutil version currently is better than ondemand.
sugov-P0 (freq_max=max_P) is the worst on dbench, while the other sugov's
can surpass ondemand with less filesystem latency and slightly increased
efficiency.
1. DATA OVERVIEW
2. DETAILED PERFORMANCE TABLES
3. POWER CONSUMPTION TABLE
1. DATA OVERVIEW
================
sugov-noinv : non-invariant schedutil governor
sugov-max : invariant schedutil, freq_max=max_boost
sugov-mid : invariant schedutil, freq_max=midpoint
sugov-P0 : invariant schedutil, freq_max=max_P
perfgov : performance governor
driver : acpi_cpufreq
machine : AMD EPYC 7742 (Zen2, aka "Rome"), dual socket,
128 cores / 256 threads, SATA SSD storage, 250G of memory,
XFS filesystem
Benchmarks are described in the next section.
Tilde (~) means the value is the same as baseline.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ondemand perfgov sugov-noinv sugov-max sugov-mid sugov-P0 better if
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PERFORMANCE RATIOS
tbench 1.00 1.44 0.90 0.87 0.93 0.93 higher
dbench 1.00 0.91 0.95 0.94 0.94 1.06 lower
kernbench 1.00 0.93 ~ ~ ~ 0.97 lower
gitsource 1.00 0.66 0.97 0.96 ~ 0.95 lower
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PERFORMANCE-PER-WATT RATIOS
tbench 1.00 1.16 0.84 0.84 0.88 0.85 higher
dbench 1.00 1.03 1.02 1.02 1.02 0.93 higher
kernbench 1.00 1.05 ~ ~ ~ ~ higher
gitsource 1.00 1.46 1.04 1.04 ~ 1.05 higher
2. DETAILED PERFORMANCE TABLES
==============================
Benchmark : tbench4 (i.e. dbench4 over the network, actually loopback)
Varying parameter : number of clients
Unit : MB/sec (higher is better)
5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 427.19 +- 0.16% ( ) 778.35 +- 0.10% ( 82.20%) 346.92 +- 0.14% ( -18.79%)
Hmean 2 853.82 +- 0.09% ( ) 1536.23 +- 0.03% ( 79.93%) 694.36 +- 0.05% ( -18.68%)
Hmean 4 1657.54 +- 0.12% ( ) 2938.18 +- 0.12% ( 77.26%) 1362.81 +- 0.11% ( -17.78%)
Hmean 8 3301.87 +- 0.06% ( ) 5679.10 +- 0.04% ( 72.00%) 2693.35 +- 0.04% ( -18.43%)
Hmean 16 6139.65 +- 0.05% ( ) 9498.81 +- 0.04% ( 54.71%) 4889.97 +- 0.17% ( -20.35%)
Hmean 32 11170.28 +- 0.09% ( ) 17393.25 +- 0.08% ( 55.71%) 9104.55 +- 0.09% ( -18.49%)
Hmean 64 19322.97 +- 0.17% ( ) 31573.91 +- 0.08% ( 63.40%) 18552.52 +- 0.40% ( -3.99%)
Hmean 128 30383.71 +- 0.11% ( ) 37416.91 +- 0.15% ( 23.15%) 25938.70 +- 0.41% ( -14.63%)
Hmean 256 31143.96 +- 0.41% ( ) 30908.76 +- 0.88% ( -0.76%) 29754.32 +- 0.24% ( -4.46%)
Hmean 512 30858.49 +- 0.26% ( ) 38524.60 +- 1.19% ( 24.84%) 42080.39 +- 0.56% ( 36.37%)
Hmean 1024 39187.37 +- 0.19% ( ) 36213.86 +- 0.26% ( -7.59%) 39555.98 +- 0.12% ( 0.94%)
5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hmean 1 352.59 +- 1.03% ( -17.46%) 352.08 +- 0.75% ( -17.58%) 352.31 +- 1.48% ( -17.53%)
Hmean 2 697.32 +- 0.08% ( -18.33%) 700.16 +- 0.20% ( -18.00%) 696.79 +- 0.06% ( -18.39%)
Hmean 4 1369.88 +- 0.04% ( -17.35%) 1369.72 +- 0.07% ( -17.36%) 1365.91 +- 0.05% ( -17.59%)
Hmean 8 2696.79 +- 0.04% ( -18.33%) 2711.06 +- 0.04% ( -17.89%) 2715.10 +- 0.61% ( -17.77%)
Hmean 16 4725.03 +- 0.03% ( -23.04%) 4875.65 +- 0.02% ( -20.59%) 4953.05 +- 0.28% ( -19.33%)
Hmean 32 9231.65 +- 0.10% ( -17.36%) 8704.89 +- 0.27% ( -22.07%) 10562.02 +- 0.36% ( -5.45%)
Hmean 64 15364.27 +- 0.19% ( -20.49%) 17786.64 +- 0.15% ( -7.95%) 19665.40 +- 0.22% ( 1.77%)
Hmean 128 42100.58 +- 0.13% ( 38.56%) 34946.28 +- 0.13% ( 15.02%) 38635.79 +- 0.06% ( 27.16%)
Hmean 256 30660.23 +- 1.08% ( -1.55%) 32307.67 +- 0.54% ( 3.74%) 31153.27 +- 0.12% ( 0.03%)
Hmean 512 24604.32 +- 0.14% ( -20.27%) 40408.50 +- 1.10% ( 30.95%) 38800.29 +- 1.23% ( 25.74%)
Hmean 1024 35535.47 +- 0.28% ( -9.32%) 41070.38 +- 2.56% ( 4.81%) 31308.29 +- 2.52% ( -20.11%)
Benchmark : dbench (filesystem stressor)
Varying parameter : number of clients
Unit : seconds (lower is better)
NOTE-1: This dbench version measures the average latency of a set of filesystem
operations, as we found the traditional dbench metric (throughput) to be
misleading.
NOTE-2: Due to high variability, we partition the original dataset and apply
statistical bootrapping (a resampling method). Accuracy is reported in the
form of 95% confidence intervals.
5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SubAmean 1 98.79 +- 0.92 ( ) 83.36 +- 0.82 ( 15.62%) 84.82 +- 0.92 ( 14.14%)
SubAmean 2 116.00 +- 0.89 ( ) 102.12 +- 0.77 ( 11.96%) 109.63 +- 0.89 ( 5.49%)
SubAmean 4 149.90 +- 1.03 ( ) 132.12 +- 0.91 ( 11.86%) 143.90 +- 1.15 ( 4.00%)
SubAmean 8 182.41 +- 1.13 ( ) 159.86 +- 0.93 ( 12.36%) 165.82 +- 1.03 ( 9.10%)
SubAmean 16 237.83 +- 1.23 ( ) 219.46 +- 1.14 ( 7.72%) 229.28 +- 1.19 ( 3.59%)
SubAmean 32 334.34 +- 1.49 ( ) 309.94 +- 1.42 ( 7.30%) 321.19 +- 1.36 ( 3.93%)
SubAmean 64 576.61 +- 2.16 ( ) 540.75 +- 2.00 ( 6.22%) 551.27 +- 1.99 ( 4.39%)
SubAmean 128 1350.07 +- 4.14 ( ) 1205.47 +- 3.20 ( 10.71%) 1280.26 +- 3.75 ( 5.17%)
SubAmean 256 3444.42 +- 7.97 ( ) 3698.00 +- 27.43 ( -7.36%) 3494.14 +- 7.81 ( -1.44%)
SubAmean 2048 39457.89 +- 29.01 ( ) 34105.33 +- 41.85 ( 13.57%) 39688.52 +- 36.26 ( -0.58%)
5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
SubAmean 1 85.68 +- 1.04 ( 13.27%) 84.16 +- 0.84 ( 14.81%) 83.99 +- 0.90 ( 14.99%)
SubAmean 2 108.42 +- 0.95 ( 6.54%) 109.91 +- 1.39 ( 5.24%) 112.06 +- 0.91 ( 3.39%)
SubAmean 4 136.90 +- 1.04 ( 8.67%) 137.59 +- 0.93 ( 8.21%) 136.55 +- 0.95 ( 8.91%)
SubAmean 8 163.15 +- 0.96 ( 10.56%) 166.07 +- 1.02 ( 8.96%) 165.81 +- 0.99 ( 9.10%)
SubAmean 16 224.86 +- 1.12 ( 5.45%) 223.83 +- 1.06 ( 5.89%) 230.66 +- 1.19 ( 3.01%)
SubAmean 32 320.51 +- 1.38 ( 4.13%) 322.85 +- 1.49 ( 3.44%) 321.96 +- 1.46 ( 3.70%)
SubAmean 64 553.25 +- 1.93 ( 4.05%) 554.19 +- 2.08 ( 3.89%) 562.26 +- 2.22 ( 2.49%)
SubAmean 128 1264.35 +- 3.72 ( 6.35%) 1256.99 +- 3.46 ( 6.89%) 2018.97 +- 18.79 ( -49.55%)
SubAmean 256 3466.25 +- 8.25 ( -0.63%) 3450.58 +- 8.44 ( -0.18%) 5032.12 +- 38.74 ( -46.09%)
SubAmean 2048 39133.10 +- 45.71 ( 0.82%) 39905.95 +- 34.33 ( -1.14%) 53811.86 +-193.04 ( -36.38%)
Benchmark : kernbench (kernel compilation)
Varying parameter : number of jobs
Unit : seconds (lower is better)
5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 2 471.71 +- 26.61% ( ) 409.88 +- 16.99% ( 13.11%) 430.63 +- 0.18% ( 8.71%)
Amean 4 211.87 +- 0.58% ( ) 194.03 +- 0.74% ( 8.42%) 215.33 +- 0.64% ( -1.63%)
Amean 8 109.79 +- 1.27% ( ) 101.43 +- 1.53% ( 7.61%) 111.05 +- 1.95% ( -1.15%)
Amean 16 59.50 +- 1.28% ( ) 55.61 +- 1.35% ( 6.55%) 59.65 +- 1.78% ( -0.24%)
Amean 32 34.94 +- 1.22% ( ) 32.36 +- 1.95% ( 7.41%) 35.44 +- 0.63% ( -1.43%)
Amean 64 22.58 +- 0.38% ( ) 20.97 +- 1.28% ( 7.11%) 22.41 +- 1.73% ( 0.74%)
Amean 128 17.72 +- 0.44% ( ) 16.68 +- 0.32% ( 5.88%) 17.65 +- 0.96% ( 0.37%)
Amean 256 16.44 +- 0.53% ( ) 15.76 +- 0.32% ( 4.18%) 16.76 +- 0.60% ( -1.93%)
Amean 512 16.54 +- 0.21% ( ) 15.62 +- 0.41% ( 5.53%) 16.84 +- 0.85% ( -1.83%)
5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 2 421.30 +- 0.24% ( 10.69%) 419.26 +- 0.15% ( 11.12%) 414.38 +- 0.33% ( 12.15%)
Amean 4 217.81 +- 5.53% ( -2.80%) 211.63 +- 0.99% ( 0.12%) 208.43 +- 0.47% ( 1.63%)
Amean 8 108.80 +- 0.43% ( 0.90%) 108.48 +- 1.44% ( 1.19%) 108.59 +- 3.08% ( 1.09%)
Amean 16 58.84 +- 0.74% ( 1.12%) 58.37 +- 0.94% ( 1.91%) 57.78 +- 0.78% ( 2.90%)
Amean 32 34.04 +- 2.00% ( 2.59%) 34.28 +- 1.18% ( 1.91%) 33.98 +- 2.21% ( 2.75%)
Amean 64 22.22 +- 1.69% ( 1.60%) 22.27 +- 1.60% ( 1.38%) 22.25 +- 1.41% ( 1.47%)
Amean 128 17.55 +- 0.24% ( 0.97%) 17.53 +- 0.94% ( 1.04%) 17.49 +- 0.43% ( 1.30%)
Amean 256 16.51 +- 0.46% ( -0.40%) 16.48 +- 0.48% ( -0.19%) 16.44 +- 1.21% ( 0.00%)
Amean 512 16.50 +- 0.35% ( 0.19%) 16.35 +- 0.42% ( 1.14%) 16.37 +- 0.33% ( 0.99%)
Benchmark : gitsource (time to run the git unit test suite)
Varying parameter : none
Unit : seconds (lower is better)
5.9.0-ondemand (BASELINE) 5.9.0-perfgov 5.9.0-sugov-noinv
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 1035.76 +- 0.30% ( ) 688.21 +- 0.04% ( 33.56%) 1003.85 +- 0.14% ( 3.08%)
5.9.0-sugov-max 5.9.0-sugov-mid 5.9.0-sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Amean 995.82 +- 0.08% ( 3.86%) 1011.98 +- 0.03% ( 2.30%) 986.87 +- 0.19% ( 4.72%)
3. POWER CONSUMPTION TABLE
==========================
Average power consumption (watts).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ondemand perfgov sugov-noinv sugov-max sugov-mid sugov-P0
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
tbench4 227.25 281.83 244.17 236.76 241.50 247.99
dbench4 151.97 161.87 157.08 158.10 158.06 153.73
kernbench 162.78 167.22 162.90 164.19 164.65 164.72
gitsource 133.65 139.00 133.04 134.43 134.18 134.32
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201112182614.10700-3-ggherdovich@suse.cz
|
|
This is the first pass in creating the ability to calculate the
frequency invariance on AMD systems. This approach uses the CPPC
highest performance and nominal performance values that range from
0 - 255 instead of a high and base frquency. This is because we do
not have the ability on AMD to get a highest frequency value.
On AMD systems the highest performance and nominal performance
vaues do correspond to the highest and base frequencies for the system
so using them should produce an appropriate ratio but some tweaking
is likely necessary.
Due to CPPC being initialized later in boot than when the frequency
invariant calculation is currently made, I had to create a callback
from the CPPC init code to do the calculation after we have CPPC
data.
Special thanks to "kernel test robot <lkp@intel.com>" for reporting that
compilation of drivers/acpi/cppc_acpi.c is conditional to
CONFIG_ACPI_CPPC_LIB, not just CONFIG_ACPI.
[ ggherdovich@suse.cz: made safe under CPU hotplug, edited changelog. ]
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201112182614.10700-2-ggherdovich@suse.cz
|
|
Pull drm fixes from Dave Airlie:
"Last week of fixes, just amdgpu and i915 collections. We had a i915
regression reported by HJ Lu reported this morning, and this contains
a fix for that he has tested.
There are a fair few other fixes, but they are spread across the two
drivers, and all fairly self contained.
amdgpu:
- Fan fix for CI asics
- Fix a warning in possible_crtcs
- Build fix for when debugfs is disabled
- Display overflow fix
- Display watermark fixes for Renoir
- SDMA 5.2 fix
- Stolen vga memory regression fix
- Power profile fixes
- Fix a regression from removal of GEM and PRIME callbacks
amdkfd:
- Fix a memory leak in dmabuf import
i915:
- rc7 regression fix for modesetting
- vdsc/dp slice fixes
- gen9 mocs entries fix
- preemption timeout fix
- unsigned compare against 0 fix
- selftest fix
- submission error propogatig fix
- request flow suspend fix"
* tag 'drm-fixes-2020-12-11' of git://anongit.freedesktop.org/drm/drm:
drm/i915/display: Go softly softly on initial modeset failure
drm/amd/pm: typo fix (CUSTOM -> COMPUTE)
drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs
drm/amdgpu: fix size calculation with stolen vga memory
drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven
drm/amdkfd: Fix leak in dmabuf import
drm/amdgpu: fix sdma instance fw version and feature version init
drm/amd/display: Add wm table for Renoir
drm/amd/display: Prevent bandwidth overflow
drm/amdgpu: fix debugfs creation/removal, again
drm/amdgpu/disply: set num_crtc earlier
drm/amdgpu/powerplay: parse fan table for CI asics
drm/i915/gt: Declare gen9 has 64 mocs entries!
drm/i915/display/dp: Compute the correct slice count for VDSC on DP
drm/i915: fix size_t greater or equal to zero comparison
drm/i915/gt: Cancel the preemption timeout on responding to it
drm/i915/gt: Ignore repeated attempts to suspend request flow across reset
drm/i915/gem: Propagate error from cancelled submit due to context closure
drm/i915/gem: Check the correct variable in selftest
|
|
The timer driver uses get_cycles64() unconditionally to obtain the current
time. A recent refactoring lost the common definition for some configs, which
is now the only one we need.
Fixes: d5be89a8d118 ("RISC-V: Resurrect the MMIO timer implementation for M-mode systems")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest fix from Steven Rostedt:
"Fix issues with grub2bls in ktest.pl
ktest.pl did not know about grub2bls that was introduced in Fedora 30,
and now it does"
* tag 'ktest-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest.pl: Fix incorrect reboot for grub2bls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One commit to implement copy_from_kernel_nofault_allowed(), otherwise
copy_from_kernel_nofault() can trigger warnings when accessing bad
addresses in some configurations.
Thanks to Christophe Leroy and Qian Cai"
* tag 'powerpc-5.10-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Fix KUAP warning by providing copy_from_kernel_nofault_allowed()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull namespaced fscaps fix from James Morris:
"Fix namespaced fscaps when !CONFIG_SECURITY (Serge Hallyn)"
* tag 'fixes-v5.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
[SECURITY] fix namespaced fscaps when !CONFIG_SECURITY
|
|
Reduce the module/device probe error into a mere debug to hide issues
where the initial modeset is failing (after lies told by hw probe) and
the system hangs with a livelock in cleaning up the failed commit.
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=210619
Fixes: b3bf99daaee9 ("drm/i915/display: Defer initial modeset until after GGTT is initialised")
Fixes: ccc9e67ab26f ("drm/i915/display: Defer initial modeset until after GGTT is initialised")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210230741.17140-1-chris@chris-wilson.co.uk
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
Fixes for VDSC/DP, selftests, shmem_utils, preemption, submission, and gt reset:
- Check the correct variable in selftest (Dan)
- Propagate error from canceled submit due to context closure (Chris)
- Ignore repeated attempts to suspend request flow across reset (Chris)
- Cancel the preemption timeout on responding to it (Chris)
- Fix unsigned compared against 0 (Colin)
- Compute the correct slice count for VDSC on DP (Manasi)
- Declar gen9 has 64 mocs entries (Chris)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209235010.GA10554@intel.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.10-2020-12-09:
amdgpu:
- Fan fix for CI asics
- Fix a warning in possible_crtcs
- Build fix for when debugfs is disabled
- Display overflow fix
- Display watermark fixes for Renoir
- SDMA 5.2 fix
- Stolen vga memory regression fix
- Power profile fixes
- Fix a regression from removal of GEM and PRIME callbacks
amdkfd:
- Fix a memory leak in dmabuf import
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210034848.18108-1-alexander.deucher@amd.com
|
|
Pull NFS client fixes from Anna Schumaker:
"Here are a handful more bugfixes for 5.10.
Unfortunately, we found some problems with the new READ_PLUS operation
that aren't easy to fix. We've decided to disable this codepath
through a Kconfig option for now, but a series of patches going into
5.11 will clean up the code and fix the issues at the same time. This
seemed like the best way to go about it.
Summary:
- Fix array overflow when flexfiles mirroring is enabled
- Fix rpcrdma_inline_fixup() crash with new LISTXATTRS
- Fix 5 second delay when doing inter-server copy
- Disable READ_PLUS by default"
* tag 'nfs-for-5.10-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Disable READ_PLUS by default
NFSv4.2: Fix 5 seconds delay when doing inter server copy
NFS: Fix rpcrdma_inline_fixup() crash with new LISTXATTRS operation
pNFS/flexfiles: Fix array overflow when flexfiles mirroring is enabled
|
|
Pull networking fixes from David Miller:
1) IPsec compat fixes, from Dmitry Safonov.
2) Fix memory leak in xfrm_user_policy(). Fix from Yu Kuai.
3) Fix polling in xsk sockets by using sk_poll_wait() instead of
datagram_poll() which keys off of sk_wmem_alloc and such which xsk
sockets do not update. From Xuan Zhuo.
4) Missing init of rekey_data in cfgh80211, from Sara Sharon.
5) Fix destroy of timer before init, from Davide Caratti.
6) Missing CRYPTO_CRC32 selects in ethernet driver Kconfigs, from Arnd
Bergmann.
7) Missing error return in rtm_to_fib_config() switch case, from Zhang
Changzhong.
8) Fix some src/dest address handling in vrf and add a testcase. From
Stephen Suryaputra.
9) Fix multicast handling in Seville switches driven by mscc-ocelot
driver. From Vladimir Oltean.
10) Fix proto value passed to skb delivery demux in udp, from Xin Long.
11) HW pkt counters not reported correctly in enetc driver, from Claudiu
Manoil.
12) Fix deadlock in bridge, from Joseph Huang.
13) Missing of_node_pur() in dpaa2 driver, fromn Christophe JAILLET.
14) Fix pid fetching in bpftool when there are a lot of results, from
Andrii Nakryiko.
15) Fix long timeouts in nft_dynset, from Pablo Neira Ayuso.
16) Various stymmac fixes, from Fugang Duan.
17) Fix null deref in tipc, from Cengiz Can.
18) When mss is biog, coose more resonable rcvq_space in tcp, fromn Eric
Dumazet.
19) Revert a geneve change that likely isnt necessary, from Jakub
Kicinski.
20) Avoid premature rx buffer reuse in various Intel driversm from Björn
Töpel.
21) retain EcT bits during TIS reflection in tcp, from Wei Wang.
22) Fix Tso deferral wrt. cwnd limiting in tcp, from Neal Cardwell.
23) MPLS_OPT_LSE_LABEL attribute is 342 ot 8 bits, from Guillaume Nault
24) Fix propagation of 32-bit signed bounds in bpf verifier and add test
cases, from Alexei Starovoitov.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
selftests: fix poll error in udpgro.sh
selftests/bpf: Fix "dubious pointer arithmetic" test
selftests/bpf: Fix array access with signed variable test
selftests/bpf: Add test for signed 32-bit bound check bug
bpf: Fix propagation of 32-bit signed bounds from 64-bit bounds.
MAINTAINERS: Add entry for Marvell Prestera Ethernet Switch driver
net: sched: Fix dump of MPLS_OPT_LSE_LABEL attribute in cls_flower
net/mlx4_en: Handle TX error CQE
net/mlx4_en: Avoid scheduling restart task if it is already running
tcp: fix cwnd-limited bug for TSO deferral where we send nothing
net: flow_offload: Fix memory leak for indirect flow block
tcp: Retain ECT bits for tos reflection
ethtool: fix stack overflow in ethnl_parse_bitset()
e1000e: fix S0ix flow to allow S0i3.2 subset entry
ice: avoid premature Rx buffer reuse
ixgbe: avoid premature Rx buffer reuse
i40e: avoid premature Rx buffer reuse
igb: avoid transmit queue timeout in xdp path
igb: use xdp_do_flush
igb: skb add metasize for xdp
...
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-12-10
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 12 day(s) which contain
a total of 21 files changed, 163 insertions(+), 88 deletions(-).
The main changes are:
1) Fix propagation of 32-bit signed bounds from 64-bit bounds, from Alexei.
2) Fix ring_buffer__poll() return value, from Andrii.
3) Fix race in lwt_bpf, from Cong.
4) Fix test_offload, from Toke.
5) Various xsk fixes.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Cong Wang, Hulk Robot, Jakub Kicinski, Jean-Philippe Brucker, John
Fastabend, Magnus Karlsson, Maxim Mikityanskiy, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mark tripped over the creative irqflags handling in the IO-APIC timer
delivery check which ends up doing:
local_irq_save(flags);
local_irq_enable();
local_irq_restore(flags);
which triggered a new consistency check he's working on required for
replacing the POPF based restore with a conditional STI.
That code is a historical mess and none of this is needed. Make it
straightforward use local_irq_disable()/enable() as that's all what is
required. It is invoked from interrupt enabled code nowadays.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/87k0tpju47.fsf@nanos.tec.linutronix.de
|
|
Prarit reported that depending on the affinity setting the
' irq $N: Affinity broken due to vector space exhaustion.'
message is showing up in dmesg, but the vector space on the CPUs in the
affinity mask is definitely not exhausted.
Shung-Hsi provided traces and analysis which pinpoints the problem:
The ordering of trying to assign an interrupt vector in
assign_irq_vector_any_locked() is simply wrong if the interrupt data has a
valid node assigned. It does:
1) Try the intersection of affinity mask and node mask
2) Try the node mask
3) Try the full affinity mask
4) Try the full online mask
Obviously #2 and #3 are in the wrong order as the requested affinity
mask has to take precedence.
In the observed cases #1 failed because the affinity mask did not contain
CPUs from node 0. That made it allocate a vector from node 0, thereby
breaking affinity and emitting the misleading message.
Revert the order of #2 and #3 so the full affinity mask without the node
intersection is tried before actually affinity is broken.
If no node is assigned then only the full affinity mask and if that fails
the full online mask is tried.
Fixes: d6ffc6ac83b1 ("x86/vector: Respect affinity mask in irq descriptor")
Reported-by: Prarit Bhargava <prarit@redhat.com>
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87ft4djtyp.fsf@nanos.tec.linutronix.de
|
|
We've been seeing failures with xfstests generic/091 and generic/263
when using READ_PLUS. I've made some progress on these issues, and the
tests fail later on but still don't pass. Let's disable READ_PLUS by
default until we can work out what is going on.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Since commit b4868b44c5628 ("NFSv4: Wait for stateid updates after
CLOSE/OPEN_DOWNGRADE"), every inter server copy operation suffers 5
seconds delay regardless of the size of the copy. The delay is from
nfs_set_open_stateid_locked when the check by nfs_stateid_is_sequential
fails because the seqid in both nfs4_state and nfs4_stateid are 0.
Fix __nfs42_ssc_open to delay setting of NFS_OPEN_STATE in nfs4_state,
until after the call to update_open_stateid, to indicate this is the 1st
open. This fix is part of a 2 patches, the other patch is the fix in the
source server to return the stateid for COPY_NOTIFY request with seqid 1
instead of 0.
Fixes: ce0887ac96d3 ("NFSD add nfs4 inter ssc to nfsd4_copy")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
By switching to an XFS-backed export, I am able to reproduce the
ibcomp worker crash on my client with xfstests generic/013.
For the failing LISTXATTRS operation, xdr_inline_pages() is called
with page_len=12 and buflen=128.
- When ->send_request() is called, rpcrdma_marshal_req() does not
set up a Reply chunk because buflen is smaller than the inline
threshold. Thus rpcrdma_convert_iovs() does not get invoked at
all and the transport's XDRBUF_SPARSE_PAGES logic is not invoked
on the receive buffer.
- During reply processing, rpcrdma_inline_fixup() tries to copy
received data into rq_rcv_buf->pages because page_len is positive.
But there are no receive pages because rpcrdma_marshal_req() never
allocated them.
The result is that the ibcomp worker faults and dies. Sometimes that
causes a visible crash, and sometimes it results in a transport hang
without other symptoms.
RPC/RDMA's XDRBUF_SPARSE_PAGES support is not entirely correct, and
should eventually be fixed or replaced. However, my preference is
that upper-layer operations should explicitly allocate their receive
buffers (using GFP_KERNEL) when possible, rather than relying on
XDRBUF_SPARSE_PAGES.
Reported-by: Olga kornievskaia <kolga@netapp.com>
Suggested-by: Olga kornievskaia <kolga@netapp.com>
Fixes: c10a75145feb ("NFSv4.2: add the extended attribute proc functions.")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga kornievskaia <kolga@netapp.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Tested-by: Olga kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The test program udpgso_bench_rx always invokes the poll()
syscall with a timeout of 10ms. If a larger timeout is specified
via the command line, udpgso_bench_rx is supposed to do multiple
poll() calls till the timeout is expired or an event is received.
Currently the poll() loop errors out after the first invocation with
no events, and may causes self-tests failure alike:
failed
GRO with custom segment size ./udpgso_bench_rx: poll: 0x0 expected 0x1
This change addresses the issue allowing the poll() loop to consume
all the configured timeout.
Fixes: ada641ff6ed3 ("selftests: fixes for UDP GRO")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The verifier trace changed following a bugfix. After checking the 64-bit
sign, only the upper bit mask is known, not bit 31. Update the test
accordingly.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The test fails because of a recent fix to the verifier, even though this
program is valid. In details what happens is:
7: (61) r1 = *(u32 *)(r0 +0)
Load a 32-bit value, with signed bounds [S32_MIN, S32_MAX]. The bounds
of the 64-bit value are [0, U32_MAX]...
8: (65) if r1 s> 0xffffffff goto pc+1
... therefore this is always true (the operand is sign-extended).
10: (b4) w2 = 11
11: (6d) if r2 s> r1 goto pc+1
When true, the 64-bit bounds become [0, 10]. The 32-bit bounds are still
[S32_MIN, 10].
13: (64) w1 <<= 2
Because this is a 32-bit operation, the verifier propagates the new
32-bit bounds to the 64-bit ones, and the knowledge gained from insn 11
is lost.
14: (0f) r0 += r1
15: (7a) *(u64 *)(r0 +0) = 4
Then the verifier considers r0 unbounded here, rejecting the test. To
make the test work, change insn 8 to check the sign of the 32-bit value.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.
In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.
Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit cf11e85fc08c ("mm: hugetlb: optionally allocate gigantic hugepages
using cma") added support for allocating gigantic hugepages using CMA,
by specifying the hugetlb_cma= kernel parameter, which will disable any
boot-time allocation of gigantic hugepages.
This patch enables that option also for s390.
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The random longs to be pulled by arch_get_random_long() are
prepared in an 4K buffer which is filled from the NIST 800-90
compliant s390 drbg. By default the random long buffer is refilled
256 times before the drbg itself needs a reseed. The reseed of the
drbg is done with 32 bytes fetched from the high quality (but slow)
trng which is assumed to deliver 100% entropy. So the 32 * 8 = 256
bits of entropy are spread over 256 * 4KB = 1MB serving 131072
arch_get_random_long() invocations before reseeded.
How often the 4K random long buffer is refilled with the drbg
before the drbg is reseeded can be adjusted. There is a module
parameter 's390_arch_rnd_long_drbg_reseed' accessible via
/sys/module/arch_random/parameters/rndlong_drbg_reseed
or as kernel command line parameter
arch_random.rndlong_drbg_reseed=<value>
This parameter tells how often the drbg fills the 4K buffer before
it is re-seeded by fresh entropy from the trng.
A value of 16 results in reseeding the drbg at every 16 * 4 KB = 64
KB with 32 bytes of fresh entropy pulled from the trng. So a value
of 16 would result in 256 bits entropy per 64 KB.
A value of 256 results in 1MB of drbg output before a reseed of the
drbg is done. So this would spread the 256 bits of entropy among 1MB.
Setting this parameter to 0 forces the reseed to take place every
time the 4K buffer is depleted, so the entropy rises to 256 bits
entropy per 4K or 0.5 bit entropy per arch_get_random_long(). With
setting this parameter to negative values all this effort is
disabled, arch_get_random long() returns false and thus indicating
that the arch_get_random_long() feature is disabled at all.
arch_get_random_long() is used by random.c among others to provide
an initial hash value to be mixed with the entropy pool on every
random data pull. For about 64 bytes read from /dev/urandom there
is one call to arch_get_random_long(). So these additional random
long values count for performance of /dev/urandom with measurable
but low penalty.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Pull rdma fixes from Jason Gunthorpe:
"Two user triggerable crashers and a some EFA related regressions:
- Syzkaller found a bug in CM
- Restore access to the GID table and fix modify_qp for EFA
- Crasher in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/cm: Fix an attempt to use non-valid pointer when cleaning timewait
RDMA/core: Fix empty gid table for non IB/RoCE devices
RDMA/efa: Use the correct current and new states in modify QP
RDMA/qedr: iWARP invalid(zero) doorbell address fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A couple of fixes:
- videobuf2: fix a DMABUF bug, preventing it to properly handle cache
sync/flush
- vidtv: an usage after free and a few sparse/smatch warning fixes
- pulse8-cec: a duplicate free and a bug related to new firmware
usage
- mtk-cir: fix a regression on a clock setting"
* tag 'media/v5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vidtv: fix some warnings
media: vidtv: fix kernel-doc markups
media: [next] media: vidtv: fix a read from an object after it has been freed
media: vb2: set cache sync hints when init buffers
media: pulse8-cec: add support for FW v10 and up
media: pulse8-cec: fix duplicate free at disconnect or probe error
media: mtk-cir: fix calculation of chk period
|
|
The MBA software controller (mba_sc) is a feedback loop which
periodically reads MBM counters and tries to restrict the bandwidth
below a user-specified value. It tags along the MBM counter overflow
handler to do the updates with 1s interval in mbm_update() and
update_mba_bw().
The purpose of mbm_update() is to periodically read the MBM counters to
make sure that the hardware counter doesn't wrap around more than once
between user samplings. mbm_update() calls __mon_event_count() for local
bandwidth updating when mba_sc is not enabled, but calls mbm_bw_count()
instead when mba_sc is enabled. __mon_event_count() will not be called
for local bandwidth updating in MBM counter overflow handler, but it is
still called when reading MBM local bandwidth counter file
'mbm_local_bytes', the call path is as below:
rdtgroup_mondata_show()
mon_event_read()
mon_event_count()
__mon_event_count()
In __mon_event_count(), m->chunks is updated by delta chunks which is
calculated from previous MSR value (m->prev_msr) and current MSR value.
When mba_sc is enabled, m->chunks is also updated in mbm_update() by
mistake by the delta chunks which is calculated from m->prev_bw_msr
instead of m->prev_msr. But m->chunks is not used in update_mba_bw() in
the mba_sc feedback loop.
When reading MBM local bandwidth counter file, m->chunks was changed
unexpectedly by mbm_bw_count(). As a result, the incorrect local
bandwidth counter which calculated from incorrect m->chunks is shown to
the user.
Fix this by removing incorrect m->chunks updating in mbm_bw_count() in
MBM counter overflow handler, and always calling __mon_event_count() in
mbm_update() to make sure that the hardware local bandwidth counter
doesn't wrap around.
Test steps:
# Run workload with aggressive memory bandwidth (e.g., 10 GB/s)
git clone https://github.com/intel/intel-cmt-cat && cd intel-cmt-cat
&& make
./tools/membw/membw -c 0 -b 10000 --read
# Enable MBA software controller
mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl
# Create control group c1
mkdir /sys/fs/resctrl/c1
# Set MB throttle to 6 GB/s
echo "MB:0=6000;1=6000" > /sys/fs/resctrl/c1/schemata
# Write PID of the workload to tasks file
echo `pidof membw` > /sys/fs/resctrl/c1/tasks
# Read local bytes counters twice with 1s interval, the calculated
# local bandwidth is not as expected (approaching to 6 GB/s):
local_1=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
sleep 1
local_2=`cat /sys/fs/resctrl/c1/mon_data/mon_L3_00/mbm_local_bytes`
echo "local b/w (bytes/s):" `expr $local_2 - $local_1`
Before fix:
local b/w (bytes/s): 11076796416
After fix:
local b/w (bytes/s): 5465014272
Fixes: ba0f26d8529c (x86/intel_rdt/mba_sc: Prepare for feedback loop)
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/1607063279-19437-1-git-send-email-xiaochen.shen@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
kvm/arm64 fixes for 5.10, take #5
- Don't leak page tables on PTE update
- Correctly invalidate TLBs on table to block transition
- Only update permissions if the fault level matches the
expected mapping size
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.10
Pull MD fixes from Song:
"This is to fix raid10 data corruption [1] in 5.10-rc7."
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
Revert "md: add md_submit_discard_bio() for submitting discard bio"
Revert "md/raid10: extend r10bio devs to raid disks"
Revert "md/raid10: pull codes that wait for blocked dev into one function"
Revert "md/raid10: improve raid10 discard request"
Revert "md/raid10: improve discard request for far layout"
Revert "dm raid: remove unnecessary discard limits for raid10"
|
|
The PAT bit is in different locations for 4k and 2M/1G page table
entries.
Add a definition for _PAGE_LARGE_CACHE_MASK to represent the three
caching bits (PWT, PCD, PAT), similar to _PAGE_CACHE_MASK for 4k pages,
and use it in the definition of PMD_FLAGS_DEC_WP to get the correct PAT
index for write-protected pages.
Fixes: 6ebcb060713f ("x86/mm: Add support to encrypt the kernel in-place")
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20201111160946.147341-1-nivedita@alum.mit.edu
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.11-2020-12-09:
amdgpu:
- SR-IOV fixes
- Navy Flounder updates
- Sienna Cichlid updates
- Dimgrey Cavefish updates
- Vangogh updates
- Misc SMU fixes
- Misc display fixes
- Last big hunk of W=1 warning fixes
- Cursor validation fixes
- CI BACO updates
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210045344.21566-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In zonefs_file_dio_append(), the pages obtained using
bio_iov_iter_get_pages() are not released on completion of the
REQ_OP_APPEND BIO, nor when bio_iov_iter_get_pages() fails.
Furthermore, a call to bio_put() is missing when
bio_iov_iter_get_pages() fails.
Fix these resource leaks by adding BIO resource release code (bio_put()i
and bio_release_pages()) at the end of the function after the BIO
execution and add a jump to this resource cleanup code in case of
bio_iov_iter_get_pages() failure.
While at it, also fix the call to task_io_account_write() to be passed
the correct BIO size instead of bio_iov_iter_get_pages() return value.
Reported-by: Christoph Hellwig <hch@lst.de>
Fixes: 02ef12a663c7 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The touchpad operates in Basic Mode by default in the Acer BIOS
setup, but some Aspire/TravelMate models require the i8042 to be
reset in order to be correctly detected.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Link: https://lore.kernel.org/r/20201207071250.15021-1-chiu@endlessos.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
This reverts commit 2628089b74d5a64bd0bcb5d247a18f78d7b6f4d0.
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
This reverts commit 8650a889017cb1f6ea6813ccf83a2e9f6fa49dd3.
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
This reverts commit f046f5d0d79cdb968f219ce249e497fd1accf484.
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
This reverts commit bcc90d280465ebd51ab8688be86e1f00c62dccf9.
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
This reverts commit d3ee2d8415a6256c1c41e1be36e80e640c3e6359.
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
This reverts commit f0e90b6c663a7e3b4736cb318c6c7c589f152c28.
Matthew Ruffell reported data corruption in raid10 due to the changes
in discard handling [1]. Revert these changes before we find a proper fix.
[1] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1907262/
Cc: Matthew Ruffell <matthew.ruffell@canonical.com>
Cc: Xiao Ni <xni@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
Add maintainers info for new Marvell Prestera Ethernet switch driver.
Signed-off-by: Mickey Rachamim <mickeyr@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
