| Age | Commit message (Collapse) | Author |
|---|
|
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
'pci_set_dma_mask()' + 'pci_set_consistent_dma_mask()' can be replaced by
an equivalent 'dma_set_mask_and_coherent()' which is much less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple break statements instead of
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
WireGuard and IPsec both typically operate on input blocks that are
~1420 bytes in size, given the default Ethernet MTU of 1500 bytes and
the overhead of the VPN metadata.
Many aead and sckipher implementations are optimized for power-of-2
block sizes, and whether they perform well when operating on 1420
byte blocks cannot be easily extrapolated from the performance on
power-of-2 block size. So let's add 1420 bytes explicitly, and round
it up to the next blocksize multiple of the algo in question if it
does not support 1420 byte blocks.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When working on crypto algorithms, being able to run tcrypt quickly
without booting an entire Linux installation can be very useful. For
instance, QEMU/kvm can be used to boot a kernel from the command line,
and having tcrypt.ko builtin would allow tcrypt to be executed to run
benchmarks, or to run tests for algorithms that need to be instantiated
from templates, without the need to make it past the point where the
rootfs is mounted.
So let's relax the requirement that tcrypt can only be built as a module
when CONFIG_EXPERT is enabled.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit c4741b2305979 ("crypto: run initcalls for generic implementations
earlier") converted tcrypt.ko's module_init() to subsys_initcall(), but
this was unintentional: tcrypt.ko currently cannot be built into the core
kernel, and so the subsys_initcall() gets converted into module_init()
under the hood. Given that tcrypt.ko does not implement a generic version
of a crypto algorithm that has to be available early during boot, there
is no point in running the tcrypt init code earlier than implied by
module_init().
However, for crypto development purposes, we will lift the restriction
that tcrypt.ko must be built as a module, and when builtin, it makes sense
for tcrypt.ko (which does its work inside the module init function) to run
as late as possible. So let's switch to late_initcall() instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move HiSilicon TRNG V2 driver into 'drivers/crypto/hisilicon/trng'
with some updating on 'MAINTAINERS'.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds support for pseudo random number generator(PRNG)
in Crypto subsystem.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move existing char/hw_random/hisi-trng-v2.c to crypto/hisilicon/trng.c.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Driver of HiSilicon true random number generator(TRNG)
is removed from 'drivers/char/hw_random'.
Both 'Kunpeng 920' and 'Kunpeng 930' chips have TRNG,
however, PRNG is only supported by 'Kunpeng 930'.
So, this driver is moved to 'drivers/crypto/hisilicon/trng/'
in the next to enable the two's TRNG better.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Reviewed-by: Zaibo Xu <xuzaibo@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a coulpe of sparse endianness warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a sparse endianness warning in sha256-spe.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a number of endianness warnings in the mips/octeon
code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Condition !A || A && B is equivalent to !A || B.
Generated by: scripts/coccinelle/misc/excluded_middle.cocci
Fixes: b76f0ea01312 ("coccinelle: misc: add excluded_middle.cocci script")
CC: Denis Efremov <efremov@linux.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Partial hash was being copied into the final result buffer without the
entire message block processed. Depending on how the end user processes
this result buffer, errors vary from result buffer corruption to result
buffer poisoing. Fix this issue by ensuring that only the final hash value
is copied into the result buffer.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support Qualcomm Crypto Engine accelerated encryption and
authentication algorithms on sdm845.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Wiring the SIMD code into the generic driver has the unfortunate side
effect that the tcrypt testing code cannot distinguish them, and will
therefore not use the latter to fuzz test the former, as it does for
other algorithms.
So let's refactor the code a bit so we can register two implementations:
aegis128-generic and aegis128-simd.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Instead of calculating the tag and returning it to the caller on
decryption, use a SIMD compare and min across vector to perform
the comparison. This is slightly more efficient, and removes the
need on the caller's part to wipe the tag from memory if the
decryption failed.
While at it, switch to unsigned int when passing cryptlen and
assoclen - we don't support input sizes where it matters anyway.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Avoid copying the tail block via a stack buffer if the total size
exceeds a single AEGIS block. In this case, we can use overlapping
loads and stores and NEON permutation instructions instead, which
leads to a modest performance improvement on some cores (< 5%),
and is slightly cleaner. Note that we still need to use a stack
buffer if the entire input is smaller than 16 bytes, given that
we cannot use 16 byte NEON loads and stores safely in this case.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The AEGIS spec mentions explicitly that the security guarantees hold
only if the resulting plaintext and tag of a failed decryption are
withheld. So ensure that we abide by this.
While at it, drop the unused struct aead_request *req parameter from
crypto_aegis128_process_crypt().
Reviewed-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A bunch of fixes for vc4 fixing some coexistence issue between wifi and
HDMI, unsupported modes, and vblank timeouts, a fix for ast to reload
the gamma LUT after changing the plane format and a double-free fix for
nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126085450.r3i7wvj7pizsa4l6@gilmour
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.10
1. Remove unused variable.
2. Modify horizontal front/back porch byte formula.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123234131.387-1-chunkuang.hu@kernel.org
|
|
ssh://git.freedesktop.org/git/drm/drm-misc into drm-next
drm-misc-next for 5.11:
UAPI Changes:
* media: Add MEDIA_BUS_FMT_RGB888_3X8_DELTA format
Cross-subsystem Changes:
* console: Remove unused functions; Store characters-per-font in font-
descriptor structure instead of hard-coding
* DT: Add vendor prefix for ShenZhen Asia Better Technology Ltd. (ABT)
Core Changes:
* Fix build warnings
* Update debug logging to new interfaces, plus fixes
* Add error messages for ioctls;
* Fix kernel docs
* doc: Fix kernel docs
* fbcon: Remove accelerated scrolling
* selftests: Fix build warnings
* ttm: Fix missing NULL check in new page pool; Fix build warnings
* video: Fix kernel docs
Driver Changes:
* armada: Fix build warnings
* atmel-hlcdc: Fix build warnings
* exynos: Fix build warnings
* gma500: Remove 2d framebuffer acceleration
* lima: Fix build warnings; Cleanups
* mediatek: Fix build warnings
* meson: Module removal fixes; Fix build warnings
* nouveau: Fix build warnings
* omap: Fix return values
* panel: Fix build warnings; Add support and DT bindings for OnePlus 6/T; Add
support and DT bindings for ABT Y030XX067A
* panel/s6e63m0: Add/improve SPi reading/writing; Support 3WIRE protocol; Set
connector display info; Add more comments
* panfrost: Move GPU reset into separate worker, avoid race conditions
* pl111: Fix build warnings
* qxl: Cleanup fbcon acceleration
* rockchip: Fix build warnings
* savage: Fix build warnings
* sti: Fix build warnings
* udl: Fix missing error code in udl_handle_damage()
* v3d: Fix build warnings
* vc4: Fix build warnings
* via: Fix build warnings
* virtio: Make dma-buf ops static
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201118123221.GA19755@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One bug fix
. Add COMMON_CLK dependency to fix a build error below,
/usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/exynos/exynos_mixer.o: in function `mixer_bind':
exynos_mixer.c:(.text+0x958): undefined reference to `clk_set_parent'
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1606184478-23384-1-git-send-email-inki.dae@samsung.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree fixes for v5.10-rc6
This contains a couple of fixes to device trees. Among other things,
this restores suspend/resume on Jetson TX2 and makes USB OTG work on
Jetson TX1.
* tag 'tegra-for-5.10-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
Link: https://lore.kernel.org/r/20201125170306.1095734-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes
NXP/FSL SoC driver fix for 5.10
DPAA2 DPIO driver
- Fix non-static cpumask for irq affinity setting
* tag 'soc-fsl-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
Link: https://lore.kernel.org/r/20201125165922.15487-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://github.com/Xilinx/linux-xlnx into arm/fixes
arm64: soc: ZynqMP SoC fixes for v5.10-rc6
- Fix SD dll reset issue by using proper macro
- Fix PM feature checking for Xilinx Versal SoC
* tag 'zynqmp-soc-fixes-for-v5.10-rc6' of https://github.com/Xilinx/linux-xlnx: (337 commits)
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
Linux 5.10-rc4
kvm: mmu: fix is_tdp_mmu_check when the TDP MMU is not in use
afs: Fix afs_write_end() when called with copied == 0 [ver #3]
ocfs2: initialize ip_next_orphan
panic: don't dump stack twice on warn
hugetlbfs: fix anon huge page migration race
mm: memcontrol: fix missing wakeup polling thread
kernel/watchdog: fix watchdog_allowed_mask not used warning
reboot: fix overflow parsing reboot cpu number
Revert "kernel/reboot.c: convert simple_strtoul to kstrtoint"
compiler.h: fix barrier_data() on clang
mm/gup: use unpin_user_pages() in __gup_longterm_locked()
mm/slub: fix panic in slab_alloc_node()
mailmap: fix entry for Dmitry Baryshkov/Eremin-Solenikov
mm/vmscan: fix NR_ISOLATED_FILE corruption on 64-bit
mm/compaction: stop isolation if too many pages are isolated and we have pages to migrate
mm/compaction: count pages and stop correctly during page isolation
drm/nouveau/kms/nv50-: Use atomic encoder callbacks everywhere
...
Link: https://lore.kernel.org/r/fd5ab967-f3cf-95fb-7947-5477ff85f97e@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced build issue in the cpufreq SCMI driver
(Sudeep Holla)"
* tag 'pm-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
|
|
Commit 20f829999c38 ("gfs2: Rework read and page fault locking") lifted
the glock lock taking from the low-level ->readpage and ->readahead
address space operations to the higher-level ->read_iter file and
->fault vm operations. The glocks are still taken in LM_ST_SHARED mode
only. On filesystems mounted without the noatime option, ->read_iter
sometimes needs to update the atime as well, though. Right now, this
leads to a failed locking mode assertion in gfs2_dirty_inode.
Fix that by introducing a new update_time inode operation. There, if
the glock is held non-exclusively, upgrade it to an exclusive lock.
Reported-by: Alexander Aring <aahringo@redhat.com>
Fixes: 20f829999c38 ("gfs2: Rework read and page fault locking")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Fix the missing clk_disable_unprepare() before return from
tegra_sor_init() in the error handling case.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
0day reported one -22.7% regression for will-it-scale page_fault2
case [1] on a 4 sockets 144 CPU platform, and bisected to it to be
caused by Waiman's optimization (commit bd0b230fe1) of saving one
'struct page_counter' space for 'struct mem_cgroup'.
Initially we thought it was due to the cache alignment change introduced
by the patch, but further debug shows that it is due to some hot data
members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent
cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch
is enabled, it triggers an "extended level" of cache false sharing for
2 adjacent cache lines.
So exchange the 2 member blocks, while keeping mostly the original
cache alignment, which can restore and even enhance the performance,
and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816,
with 0day's default RHEL-8.3 kernel config)
[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/
Fixes: bd0b230fe145 ("mm/memcg: unify swap and memsw page counters")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This wasn't initialized for pre NV50 hardware.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-and-Tested-by: Mark Hounschell <markh@compro.net>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/series/84298/
|
|
When one task is in io_uring_cancel_files() and another is doing
io_prep_async_work() a race may happen. That's because after accounting
a request inflight in first call to io_grab_identity() it still may fail
and go to io_identity_cow(), which migh briefly keep dangling
work.identity and not only.
Grab files last, so io_prep_async_work() won't fail if it did get into
->inflight_list.
note: the bug shouldn't exist after making io_uring_cancel_files() not
poking into other tasks' requests.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When a memory window is bound to a memory region, the local write access
should be set for its mtpt table.
Fixes: c7c28191408b ("RDMA/hns: Add MW support for hip08")
Link: https://lore.kernel.org/r/1606386372-21094-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The maximum number of retransmission should be returned when querying QP,
not the value of retransmission counter.
Fixes: 99fcf82521d9 ("RDMA/hns: Fix the wrong value of rnr_retry when querying qp")
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1606382977-21431-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The SRQ capacity is got from the firmware, whose field should be ended at
bit 19.
Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
My virtual IOMMU implementation is whining that the guest is reading a
register that doesn't exist. Only read the VCCAP_REG if the corresponding
capability is set in ECAP_REG to indicate that it actually exists.
Fixes: 3375303e8287 ("iommu/vt-d: Add custom allocator for IOASID")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Cc: stable@vger.kernel.org # v5.7+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/de32b150ffaa752e0cff8571b17dfb1213fbe71c.camel@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add touchscreen info for the Irbis TW118 tablet.
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com
|
|
Add touchscreen info for the Predia Basic tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com
|
|
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is
a convertible, while it is actually a convertible. Add it to the
dmi_switches_allow_list.
Signed-off-by: Max Verevkin <me@maxverevkin.tk>
Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The commit 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up
variable declaration") cleans up variable declaration in
video_proc_write(). Seems it does the variable assignment in the
wrong place, this results in dead code and changes the source code
logic. Fix it by doing the assignment at the beginning of the funciton.
Fixes: 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up variable declaration")
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1606024177-16481-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
as KEY_LIGHTS_TOGGLE
Got a dmesg message on my AMD Renoir based Acer laptop:
"acer_wmi: Unknown key number - 0x84" when toggling keyboard
background light
Signed-off-by: Timo Witte <timo.witte@gmail.com>
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Link: https://lore.kernel.org/r/20200804001423.36778-1-timo.witte@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This commit enables dual fan control for the following new Lenovo
models: P15, P15v.
Signed-off-by: Matthias Maier <tamiko@43-1.org>
Link: https://lore.kernel.org/r/20201126000416.2459645-2-tamiko-ibm-acpi-devel@43-1.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The lid state may change while the machine is suspended. As such, we may
need to re-check the state at wake-up time (at least when waking up from
hibernation).
Add the appropriate call to the resume handler in order to sync the
SW_TABLET_MODE switch state with the hardware state.
Fixes: dda3ec0aa631 ("platform/x86: thinkpad_acpi: Implement tablet mode using GMMS method")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210269
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hnh@hmh.eng.br>
Link: https://lore.kernel.org/r/20201123132157.866303-1-benjamin@sipsolutions.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Yoga 11e 4th gen
The Thinkpad Yoga 11e 4th gen with the N3450 / Celeron CPU only has
one battery which is named BAT1 instead of the expected BAT0, add a
quirk for this. This fixes not being able to set the charging tresholds
on this model; and this alsoe fixes the following errors in dmesg:
ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
thinkpad_acpi: Error probing battery 2
battery: extension failed to load: ThinkPad Battery Extension
battery: extension unregistered: ThinkPad Battery Extension
Note that the added quirk is for the "R0K" BIOS versions which are
used on the Thinkpad Yoga 11e 4th gen's with a Celeron CPU, there
is a separate "R0L" BIOS for the i3/i5 based versions. This may also
need the same quirk, but if that really is necessary is unknown.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201109103550.16265-1-hdegoede@redhat.com
|
|
The Yoga 11e series has 2 accelerometers described by a BOSC0200 ACPI node.
This setup relies on a Windows service which reads both accelerometers and
then calculates the angle between the 2 halves to determine laptop / tent /
tablet mode and then reports the calculated mode back to the EC by calling
special ACPI methods on the BOSC0200 node.
The bmc150 iio driver does not support this (it involves double
calculations requiring sqrt and arccos so this really needs to be done
in userspace), as a result of this on the Yoga 11e the thinkpad_acpi
code always reports SW_TABLET_MODE=0, starting with GNOME 3.38 reporting
SW_TABLET_MODE=0 causes GNOME to:
1. Not show the onscreen keyboard when a text-input field is focussed
with the touchscreen.
2. Disable accelerometer based auto display-rotation.
This makes sense when in laptop-mode but not when in tablet-mode. But
since for the Yoga 11e the thinkpad_acpi code always reports
SW_TABLET_MODE=0, GNOME does not know when the device is in tablet-mode.
Stop reporting the broken (always 0) SW_TABLET_MODE on Yoga 11e models
to fix this.
Note there are plans for userspace to support 360 degree hinges style
2-in-1s with 2 accelerometers and figure out the mode by itself, see:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201106140130.46820-1-hdegoede@redhat.com
|
|
Tested on my P1 gen3, works fine with `thinkfan`. Since thinkpad_acpi fan
control is off by default, it is safe to add 2nd fan control for brave
overclockers
Signed-off-by: Iakov 'Jake' Kirilenko <jake.kirilenko@gmail.com>
Link: https://lore.kernel.org/r/20201105152556.34073-1-jake.kirilenko@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add the uv_sysfs driver to construct a read-only sysfs interface at
/sys/firmware/sgi_uv/ to expose information gathered from UV BIOS. This
information includes:
* UV Hub descriptions, including physical location
* Cabling layout between hubs on the fabric
* PCI topology, including physical location of PCI cards
Together, the information provides a robust physical description of a UV
system, useful for correlating to performance data or performing remote
support.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lkml.kernel.org/r/20201125175444.279074-4-justin.ernst@hpe.com
|
|
The rc_proto enum values should be ignored for now, otherwise we get
warnings like:
Documentation/output/lirc.h.rst:6: WARNING: undefined label: rc-proto-max (if the link has no caption the label must precede a section header)
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 72e637fec558 ("media: rc: validate that "rc_proto" is reasonable")
Fixes: cea357bc2571 ("media: lirc: ensure RC_PROTO_MAX has documentation")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
