summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-29MIPS: DEC: Avoid la pseudo-instruction in delay slotsRalf Baechle
When expanding the la or dla pseudo-instruction in a delay slot the GNU assembler will complain should the pseudo-instruction expand to multiple actual instructions, since only the first of them will be in the delay slot leading to the pseudo-instruction being only partially executed if the branch is taken. Use of PTR_LA in the dec int-handler.S leads to such warnings: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot Avoid this by open coding the PTR_LA macros. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: Octeon: mark GPIO controller node not populated after IRQ init.Steven J. Hill
We clear the OF_POPULATED flag for the GPIO controller node on Octeon processors. Otherwise, none of the devices hanging on the GPIO lines are probed. The 'gpio-leds' driver on OCTEON failed to probe in addition to other devices on Cavium 71xx and 78xx development boards. Fixes: 15cc2ed6dcf9 ("of/irq: Mark initialised interrupt controllers as populated") Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Daney <david.daney@cavium.com> Cc: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14091/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: uprobes: fix use of uninitialised variableMarcin Nowakowski
arch_uprobe_pre_xol needs to emulate a branch if a branch instruction has been replaced with a breakpoint, but in fact an uninitialised local variable was passed to the emulator routine instead of the original instruction Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14300/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: uprobes: remove incorrect set_orig_insnMarcin Nowakowski
Generic kernel code implements a weak version of set_orig_insn that moves cached 'insn' from arch_uprobe to the original code location when the trap is removed. MIPS variant used arch_uprobe->orig_inst which was never initialised properly, so this code only inserted a nop instead of the original instruction. With that change orig_inst can also be safely removed. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14299/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: fix uretprobe implementationMarcin Nowakowski
arch_uretprobe_hijack_return_addr should replace the return address for a call with a trampoline address. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Fixes: 40e084a506eb ('MIPS: Add uprobes support.') Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14298/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29MIPS: smp-cps: Avoid BUG() when offlining pre-r6 CPUsMatt Redfearn
Commit 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug of MIPSr6 processors") added a call to mips_cm_lock_other in order to lock the CPC in CPUs containing a version 3 or higher Coherence Manager, which use the general CM core other register, where previous CMs had a dedicated core other register for the CPC. A kernel BUG() is triggered, however, if mips_cm_lock_other is called with a VP other than 0 on a CPU with CM < 3, a condition introduced by 0d2808f338c7. Avoid the BUG() by always locking VP0 when locking the CPC, since the required register, cpc_stat_conf, is shared by all vps in a core. Fixes: 0d2808f338c7 ("MIPS: smp-cps: Add support for CPU hotplug...) Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14297/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-09-29ARM: 8617/1: dma: fix dma_max_pfn()Roger Quadros
Since commit 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation"), dma_to_pfn() already returns the PFN with the physical memory start offset so we don't need to add it again. This fixes USB mass storage lock-up problem on systems that can't do DMA over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM can only do DMA over the first 2GB. [K2E-EVM]. What happens there is that without this patch SCSI layer sets a wrong bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2 is 0x87fffffff. This results in non DMA'ble pages being given to the USB controller and hence the lock-up. NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0. This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000 and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be 0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because USB devices are not correctly inheriting the dma_pfn_offset from the USB host controller. This will be fixed by a separate patch. Fixes: 6ce0d2001692 ("ARM: dma: Use dma_pfn_offset for dma address translation") Cc: stable@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-29ARM: 8616/1: dt: Respect property size when parsing CPUsRobin Murphy
Whilst MPIDR values themselves are less than 32 bits, it is still perfectly valid for a DT to have #address-cells > 1 in the CPUs node, resulting in the "reg" property having leading zero cell(s). In that situation, the big-endian nature of the data conspires with the current behaviour of only reading the first cell to cause the kernel to think all CPUs have ID 0, and become resoundingly unhappy as a consequence. Take the full property length into account when parsing CPUs so as to be correct under any circumstances. Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2016-09-29perf tests: Add dwarf unwind test for powerpcRavi Bangoria
The user stack dump feature was recently added for powerpc. But there was no test case available to test it. This test works same as on other architectures by preparing a stack frame on the perf test thread and comparing each frame by unwinding it. $ ./perf test 50 50: Test dwarf unwind : Ok User stack dump for powerpc: https://lkml.org/lkml/2016/4/28/482 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1474267100-31079-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf probe: Match linkage name with mangled nameMasami Hiramatsu
Match linkage name with mangled name if exists. The linkage_name is used for storing mangled name of the object. Thus, this allows 'perf probe' to find appropriate probe point from mangled symbol as below. E.g. without this fix: ---- $ perf probe -x /usr/lib64/libstdc++.so.6 \ -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv Probe point '_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv' not found. Error: Failed to add events. ---- With this fix, perf probe can find the correct one. ---- $ perf probe -x /usr/lib64/libstdc++.so.6 \ -D _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv p:probe_libstdc/_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv /usr/lib64/libstdc++.so.6.0.22:0x8ca60 ---- Committer notes: After the fix, setting it for real (no -D/--definition, that amounts to a --dry-run): # perf probe -x /usr/lib64/libstdc++.so.6 _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv Added new event: probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on _ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv in /usr/lib64/libstdc++.so.6.0.22) You can now use it in all perf tools, such as: perf record -e probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv -aR sleep 1 # perf probe -l probe_libstdc:* probe_libstdc:_ZNKSt15basic_fstreamXXIwSt11char_traitsIwEE7is_openEv (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) # Reported-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/147464493162.29804.16715053505069382443.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf probe: Fix to cut off incompatible chars from group nameMasami Hiramatsu
Cut off the characters which can not use for group name of uprobes when making it based on executable filename. For example, if the exec name is libstdc++.so, without this fix perf probe generates "probe_libstdc++" as the group name, but it is failed to set because '+' can not be used for group name. With this fix perf accepts only alphabet, number or '_' for group name, thus perf generates "probe_libstdc" as the group name. E.g. with this fix, you can see the event name has no "+". ---- $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open p:probe_libstdc/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80 p:probe_libstdc/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70 p:probe_libstdc/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60 p:probe_libstdc/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0 p:probe_libstdc/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9 ---- Committer note: Before this fix: # perf probe -x /usr/lib64/libstdc++.so.6 is_open Failed to write event: Invalid argument Error: Failed to add events. # After the fix: # perf probe -x /usr/lib64/libstdc++.so.6 is_open Added new events: probe_libstdc:is_open (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_1 (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_2 (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_3 (on is_open in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_4 (on is_open in /usr/lib64/libstdc++.so.6.0.22) You can now use it in all perf tools, such as: perf record -e probe_libstdc:is_open_4 -aR sleep 1 # perf probe -l probe_libstdc:* probe_libstdc:is_open (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_1 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_2 (on is_open@libstdc++-v3/include/fstream in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_3 (on is_open@src/c++98/basic_file.cc in /usr/lib64/libstdc++.so.6.0.22) probe_libstdc:is_open_4 (on stdio_filebuf:5@include/ext/stdio_filebuf.h in /usr/lib64/libstdc++.so.6.0.22) # Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/147464491667.29804.9553638175441827970.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf probe: Skip if the function address is 0Masami Hiramatsu
Skip probes if the entry address of the target function is 0. This can happen when we're handling C++ debuginfo files. E.g. without this fix, below case still fail. ---- $ ./perf probe -x /usr/lib64/libstdc++.so.6 -vD is_open probe-definition(0): is_open symbol:is_open file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null) symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null) symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null) Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug Try to find probe point from debuginfo. Matched function: is_open [295df] found inline addr: 0x8ca80 Probe point found: is_open+0 found inline addr: 0x8ca70 Probe point found: is_open+0 found inline addr: 0x8ca60 Probe point found: is_open+0 Matched function: is_open [6527f] Matched function: is_open [9fe8a] Probe point found: is_open+0 Matched function: is_open [19710b] found inline addr: 0xecca9 Probe point found: stdio_filebuf+57 found inline addr: 0x0 Probe point found: swap+0 Matched function: is_open [19fc9d] Probe point found: is_open+0 Found 7 probe_trace_events. p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80 p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70 p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60 p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0 p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9 Failed to synthesize probe trace event. Error: Failed to add events. Reason: Invalid argument (Code: -22) ---- This is because some instances have entry_pc == 0 (see 19710b and 19fc9d). With this fix, those are skipped. ---- $ ./perf probe -x /usr/lib64/libstdc++.so.6 -D is_open p:probe_libstdc++/is_open /usr/lib64/libstdc++.so.6.0.22:0x8ca80 p:probe_libstdc++/is_open_1 /usr/lib64/libstdc++.so.6.0.22:0x8ca70 p:probe_libstdc++/is_open_2 /usr/lib64/libstdc++.so.6.0.22:0x8ca60 p:probe_libstdc++/is_open_3 /usr/lib64/libstdc++.so.6.0.22:0xb0ad0 p:probe_libstdc++/is_open_4 /usr/lib64/libstdc++.so.6.0.22:0xecca9 ---- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/147464490707.29804.14277897643725143867.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf probe: Ignore the error of finding inline instanceMasami Hiramatsu
Ignore the error when the perf probe failed to find inline function instances. This can happen when we search a method in C++ debuginfo. If there is completely no instance in target, perf probe can return an error. E.g. without this fix: ---- $ perf probe -x /usr/lib64/libstdc++.so.6 -vD showmanyc probe-definition(0): showmanyc symbol:showmanyc file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments symbol:catch file:(null) line:0 offset:0 return:0 lazy:(null) symbol:throw file:(null) line:0 offset:0 return:0 lazy:(null) symbol:rethrow file:(null) line:0 offset:0 return:0 lazy:(null) Open Debuginfo file: /usr/lib/debug/usr/lib64/libstdc++.so.6.0.22.debug Try to find probe point from debuginfo. Matched function: showmanyc An error occurred in debuginfo analysis (-2). Trying to use symbols. Failed to find symbol showmanyc in /usr/lib64/libstdc++.so.6.0.22 Error: Failed to add events. Reason: No such file or directory (Code: -2) ---- This is because one of showmanyc is defined as inline but no instance found. With this fix, it is succeeded to show as below. ---- $ perf probe -x /usr/lib64/libstdc++.so.6 -D showmanyc p:probe_libstdc++/showmanyc /usr/lib64/libstdc++.so.6.0.22:0xb0e50 p:probe_libstdc++/showmanyc_1 /usr/lib64/libstdc++.so.6.0.22:0xc7c40 p:probe_libstdc++/showmanyc_2 /usr/lib64/libstdc++.so.6.0.22:0xecfa0 p:probe_libstdc++/showmanyc_3 /usr/lib64/libstdc++.so.6.0.22:0x115fc0 p:probe_libstdc++/showmanyc_4 /usr/lib64/libstdc++.so.6.0.22:0x121a90 ---- Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/147464489775.29804.3190419491209875936.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Fix decoding when there are address filtersAdrian Hunter
Due to errata SKL014 "Intel PT TIP.PGD May Not Have Target IP Payload", the Intel PT decoder needs to match address filters against TIP.PGD packets. Parse the address filters and implement the decoder's 'pgd_ip()' callback to match the IP against the filter regions. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-17-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Enable decoder to handle TIP.PGD with missing IPAdrian Hunter
When address filters are used, the decoder must detect the end of a filter region (or a branch into a tracestop region) by matching Packet Generation Disabled (TIP.PGD) packets against the object code using the IP given in the packet. However, due to errata SKL014 "Intel PT TIP.PGD May Not Have Target IP Payload", that IP may not be present. Enable the decoder to handle that by adding a new callback function 'pgd_ip()' which indicates whether the IP is not traced, in which case that is the point where the trace was disabled. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-16-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Read address filter from AUXTRACE_INFO eventAdrian Hunter
Read the address filter from the AUXTRACE_INFO event in preparation for using it to assist in decoding. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-15-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Record address filter in AUXTRACE_INFO eventAdrian Hunter
The address filter is needed to help decode the trace, so store it in the AUXTRACE_INFO event. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-14-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Add a helper function for processing AUXTRACE_INFOAdrian Hunter
Add a helper function 'intel_pt_has()' to make it easier to determine which members the AUXTRACE_INFO event contains. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-13-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Fix missing error codes processing auxtrace_infoAdrian Hunter
Fix 2 places where the err variable was not being set. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-12-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Add support for recording the max non-turbo ratioAdrian Hunter
Previously the maximum non-turbo ratio was calculated from TSC assuming a 100 MHz multiplier which is correct for current hardware supporting Intel PT. However more recent kernels also now export the value, so use that in preference to the calculated value. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-11-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf intel-pt: Fix snapshot overlap detection decoder errorsAdrian Hunter
Fix occasional decoder errors decoding trace data collected in snapshot mode. Snapshot mode can take successive snapshots of trace which might overlap. The decoder checks whether there is an overlap but only looks at the current and previous buffer. However buffers that do not contain synchronization (i.e. PSB) packets cannot be decoded or used for overlap checking. That means the decoder actually needs to check overlaps between the current buffer and the previous buffer that contained usable data. Make that change. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: stable@vger.kernel.org # v4.3+ Link: http://lkml.kernel.org/r/1474641528-18776-10-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf probe: Increase debug level of SDT debug messagesAdrian Hunter
Two SDT debug messages can occur for every DSO which is too noisy. Consequently, increase debug level of SDT messages. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-9-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf record: Add support for using symbols in address filtersAdrian Hunter
Symbols come from either the DSO or /proc/kallsyms for the kernel. Details of the functionality can be found in Documentation/perf-record.txt. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-8-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf symbols: Add dso__last_symbol()Adrian Hunter
Add a function to find the last symbol in a DSO. This will be used when parsing address filters to calculate a region that includes the entire DSO. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf record: Fix error pathsAdrian Hunter
Some error paths do not tidy-up. Fix that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-6-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf record: Rename label 'out_symbol_exit'Adrian Hunter
In preparation for fixing the error paths, rename label 'out_symbol_exit' to be 'out' because that error path can be used irrespective of whether symbols (or anything else) has been initialized. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-5-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf script: Fix vanished idle symbolsAdrian Hunter
Commit 608c34de0b3d ("perf symbols: Mark if a symbol is idle in the library") causes idle symbols to vanish from perf script output. That is because print functions suppress symbols marked as 'idle'. However, suppression of 'idle' functions is only used by 'perf top' and 'perf top' does not use the print functions. Consequently that functionality can simply be removed from the print functions. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 608c34de0b3d ("perf symbols: Mark if a symbol is idle in the library") Link: http://lkml.kernel.org/r/1474641528-18776-4-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf evsel: Add support for address filtersMathieu Poirier
This patch makes it possible to use the current filter framework with address filters. That way address filters for HW tracers such as CoreSight and Intel PT can be communicated to the kernel drivers. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474037045-31730-4-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf evsel: New tracepoint specific functionMathieu Poirier
Making function perf_evsel__append_filter() static and introducing a new tracepoint specific function to append filters. That way we eliminate redundant code and avoid formatting mistake. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474037045-31730-3-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf tools: Make perf_evsel__append_filter() genericMathieu Poirier
By making function perf_evsel__append_filter() take a format rather than an operator it is possible to reuse the code for other purposes (ex. Intel PT and CoreSight) than tracepoints. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474037045-31730-2-git-send-email-mathieu.poirier@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf tools: Update documentation info about quipperSimon Que
The existing link is outdated. The most recent quipper code can be found at the new URL. Committer notes: Quipper is a C++ parser that can be used to convert from a perf.data file to and from a protobuf, a Chromium OS facility. Signed-off-by: Simon Que <sque@chromium.org> Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chong Jiang <chongjiang@chromium.org> Link: http://lkml.kernel.org/n/tip-4q1nm7jl3vovp66p5bki20pq@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29ACPI / documentation: Use recommended name in GPIO property namesMika Westerberg
The recommended property name for all kinds of GPIOs is to end it with "-gpios" even if there is only one GPIO. Update the documentation to follow this fact. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-29MAINTAINERS: update entry for atmel_serial driverNicolas Ferre
Change maintainer for the serial driver found on most of the Microchip / Atmel MPUs and take advantage of the move to rename and reorder the entry. I'm happy that Richard is taking over the maintenance of this driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28sparc64: Fix non-SMP build.David S. Miller
Need to provide a dummy smp_fill_in_cpu_possible_map. Fixes: 9b2f753ec237 ("sparc64: Fix cpu_possible_mask if nr_cpus is set") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-28Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge fixes from Andrew Morton: "4 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mem-hotplug: use nodes that contain memory as mask in new_node_page() scripts/recordmcount.c: account for .softirqentry.text dma-mapping.h: preserve unmap info for CONFIG_DMA_API_DEBUG mm,ksm: fix endless looping in allocating memory when ksm enable
2016-09-28mem-hotplug: use nodes that contain memory as mask in new_node_page()Li Zhong
9bb627be47a5 ("mem-hotplug: don't clear the only node in new_node_page()") prevents allocating from an empty nodemask, but as David points out, it is still wrong. As node_online_map may include memoryless nodes, only allocating from these nodes is meaningless. This patch uses node_states[N_MEMORY] mask to prevent the above case. Fixes: 9bb627be47a5 ("mem-hotplug: don't clear the only node in new_node_page()") Fixes: 394e31d2ceb4 ("mem-hotplug: alloc new page from a nearest neighbor node when mem-offline") Link: http://lkml.kernel.org/r/1474447117.28370.6.camel@TP420 Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28scripts/recordmcount.c: account for .softirqentry.textDmitry Vyukov
be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") added .softirqentry.text section, but it was not added to recordmcount. So functions in the section are untracable. Add the section to scripts/recordmcount.c and scripts/recordmcount.pl. Fixes: be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") Link: http://lkml.kernel.org/r/1474902626-73468-1-git-send-email-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Steve Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28dma-mapping.h: preserve unmap info for CONFIG_DMA_API_DEBUGAndrey Smirnov
When CONFIG_DMA_API_DEBUG is enabled we need to preserve unmapping address even if "unmap" is a no-op for our architecutre because we need debug_dma_unmap_page() to correctly cleanup all of the debug bookkeeping. Failing to do so results in a false positive warnings about previously mapped areas never being unmapped. Link: http://lkml.kernel.org/r/1474387125-3713-1-git-send-email-andrew.smirnov@gmail.com Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <jroedel@suse.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Cc: "Luis R. Rodriguez" <mcgrof@suse.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Geliang Tang <geliangtang@163.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28mm,ksm: fix endless looping in allocating memory when ksm enablezhong jiang
I hit the following hung task when runing a OOM LTP test case with 4.1 kernel. Call trace: [<ffffffc000086a88>] __switch_to+0x74/0x8c [<ffffffc000a1bae0>] __schedule+0x23c/0x7bc [<ffffffc000a1c09c>] schedule+0x3c/0x94 [<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350 [<ffffffc000a1e32c>] down_write+0x64/0x80 [<ffffffc00021f794>] __ksm_exit+0x90/0x19c [<ffffffc0000be650>] mmput+0x118/0x11c [<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74 [<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4 [<ffffffc0000d0f34>] get_signal+0x444/0x5e0 [<ffffffc000089fcc>] do_signal+0x1d8/0x450 [<ffffffc00008a35c>] do_notify_resume+0x70/0x78 The oom victim cannot terminate because it needs to take mmap_sem for write while the lock is held by ksmd for read which loops in the page allocator ksm_do_scan scan_get_next_rmap_item down_read get_next_rmap_item alloc_rmap_item #ksmd will loop permanently. There is no way forward because the oom victim cannot release any memory in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve this problem because it would release the memory asynchronously. Nevertheless we can relax alloc_rmap_item requirements and use __GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan would just retry later after the lock got dropped. Such a patch would be also easy to backport to older stable kernels which do not have oom_reaper. While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed by the allocation failure. Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Suggested-by: Hugh Dickins <hughd@google.com> Suggested-by: Michal Hocko <mhocko@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28watchdog: wdat_wdt: Fix warning for using 0 as NULLWei Yongjun
Fixes the following sparse warnings: drivers/watchdog/wdat_wdt.c:210:66: warning: Using plain integer as NULL pointer drivers/watchdog/wdat_wdt.c:235:66: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28watchdog: wdat_wdt: fix return value check in wdat_wdt_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28platform/x86: intel_pmc_ipc: Do not create iTCO watchdog when WDAT table existsMika Westerberg
ACPI WDAT table is the preferred way to use hardware watchdog over the native iTCO_wdt. Windows only uses this table for its hardware watchdog implementation so we should be relatively safe to trust it has been validated by OEMs. Prevent iTCO watchdog creation if we detect that there is an ACPI WDAT table. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28i2c: i801: Do not create iTCO watchdog when WDAT table existsMika Westerberg
ACPI WDAT table is the preferred way to use hardware watchdog over the native iTCO_wdt. Windows only uses this table for its hardware watchdog implementation so we should be relatively safe to trust it has been validated by OEMs Prevent iTCO watchdog creation if we detect that there is ACPI WDAT table. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28mfd: lpc_ich: Do not create iTCO watchdog when WDAT table existsMika Westerberg
ACPI WDAT table is the preferred way to use hardware watchdog over the native iTCO_wdt. Windows only uses this table for its hardware watchdog implementation so we should be relatively safe to trust it has been validated by OEMs Prevent iTCO watchdog creation if we detect that there is ACPI WDAT table. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-28Merge tag 'for-linus-20160928' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull late MTD fixes from Brian Norris: "Another round of MTD fixes for v4.8 My apologies for sending this so late. I've been fairly absent as a maintainer this cycle, but I did queue these up weeks ago. In the meantime, Richard was able to handle some other fixes (thanks!) but didn't pick these up. On the bright side, these are very simple changes that should carry little risk. Summary: - Davinci NAND: fix a long-standing bug in how we clear/prep 4-bit ECC - OMAP NAND: an error-handling fix that made it into v4.8-rc1 caused error-handling cases in other configurations/code-paths; this fixes the fix" * tag 'for-linus-20160928' of git://git.infradead.org/linux-mtd: mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl mtd: nand: omap2: Don't call dma_release_channel() if dma_request_chan() failed
2016-09-28MAINTAINERS: Update my e-mailMark Fasheh
I will be starting employment at Versity next week and would like to update my MAINTAINERS e-mail to reflect that change. My versity e-mail is already activated so I shouldn't get any bounces on the new one. My ability to help with Ocfs2 kernel maintenance won't change as a result of the new job. Signed-off-by: Mark Fasheh <mfasheh@versity.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-28spi: imx: fix error return code in spi_imx_probe()Wei Yongjun
Fix to return error code -EINVAL if no CS GPIOs available instead of 0, as done elsewhere in this function. Fixes: f13d4e189d20 ("spi: imx: Gracefully handle NULL master->cs_gpios") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-28perf trace: Beautify sched_[gs]et_attr return valueArnaldo Carvalho de Melo
Both return errno, show the string associated then. More work needed to capture the sched_attr arg to beautify it in turn, probably using BPF. Before: 0.210 ( 0.001 ms): sched_setattr(uattr: 0x7ffc684f02b0) = -22 After the patch, for this sched_attr, all other parms are zero, so not shown: struct sched_attr attr = { .size = sizeof(attr), .sched_policy = SCHED_DEADLINE, .sched_runtime = 10 * USECS_PER_SEC, .sched_period = 30 * USECS_PER_SEC, .sched_deadline = attr.sched_period, }; 0.321 ( 0.002 ms): sched_setattr(uattr: 0x7ffc44116da0) = -1 EINVAL Invalid argument [root@jouet c]# perf trace -e sched_setattr ./sched_deadline Couldn't negotiate deadline: Invalid argument 0.229 ( 0.003 ms): sched_setattr(uattr: 0x7ffd8dcd8df0) = -1 EINVAL Invalid argument [root@jouet c]# Now to figure out the reason for this EINVAL. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Clark Williams <williams@redhat.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-tyot2n7e48zm8pdw8tbcm3sl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-28drivers: dma-coherent: Move spinlock in dma_alloc_from_coherent()Bastian Hecht
We don't need to hold the spinlock while zeroing the allocated memory. In case we handle big buffers this is a severe issue as other CPUs might be spinning half a second or longer. Signed-off-by: Bastian Hecht <bhecht@de.adit-jv.com> Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-28drivers: dma-coherent: Fix DMA coherent size for less than pageGeorge G. Davis
We fix a bug in dma_mmap_from_coherent() that appears when we map non page aligned DMA memory. It cuts off the non aligned part (this is different to dma_alloc_coherent() that always rounds up to full pages). So for mappings of less than a page we get -ENXIO as dma_mmap_from_coherent() assumes we want to map zero pages. Signed-off-by: George G. Davis <george_davis@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-17 03:34:32 +0000