| Age | Commit message (Collapse) | Author |
|---|
|
When --hierarchy option is used, each entry has its own hpp_list to show
the result. But it missed to update width of each column.
Before:
- 46.29% 48.12% netctl-auto
+ 31.44% 29.25% [kernel.vmlinux]
+ 8.52% 11.55% libc-2.22.so
+ 5.19% 6.91% bash
+ 10.75% 11.83% wpa_cli
+ 8.25% 2.23% swapper
+ 6.45% 5.40% tr
+ 4.81% 8.09% awk
+ 4.15% 2.85% firefox
+ 3.86% 2.53% sh
After:
- 46.29% 48.12% netctl-auto
+ 31.44% 29.25% [kernel.vmlinux]
+ 8.52% 11.55% libc-2.22.so
+ 5.19% 6.91% bash
+ 10.75% 11.83% wpa_cli
+ 8.25% 2.23% swapper
+ 6.45% 5.40% tr
+ 4.81% 8.09% awk
+ 4.15% 2.85% firefox
+ 3.86% 2.53% sh
Committer note:
Full testing instructions:
1) Record with an event group:
$ perf record -e '{cycles,instructions}' make -j4
2) Use report in hierarchy mode, to get a few expanded trees on
the same screen, use --percent-limit:
$ perf report --hierarchy --percent-limit 0.5
Samples: 103K of event 'anon group { cycles:u, instructions:u }',
Event count (approx.): 57317631725
Overhead Command / Shared Object / Symbol ◆
- 58.89% 55.12% cc1 ▒
- 50.26% 48.10% cc1 ▒
3.61% 5.13% [.] _cpp_lex_token ▒
2.58% 0.78% [.] ht_lookup_with_hash ▒
1.31% 1.30% [.] ggc_internal_alloc ▒
1.08% 2.25% [.] get_combined_adhoc_loc ▒
1.01% 1.95% [.] ira_init ▒
0.96% 1.78% [.] linemap_position_for_column ▒
0.65% 1.01% [.] cpp_get_token_with_location ▒
- 7.52% 6.58% libc-2.23.so ▒
1.70% 1.78% [.] _int_malloc ▒
0.69% 0.75% [.] _int_free ▒
0.67% 0.42% [.] malloc_consolidate ▒
- 0.58% 0.42% ld-2.23.so ▒
no entry >= 0.50% ▒
- 0.52% 0.03% [kernel.vmlinux] ▒
no entry >= 0.50% ▒
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 1b2dbbf41a0f ("perf hists: Use own hpp_list for hierarchy mode")
Link: http://lkml.kernel.org/r/20160920053025.13989-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Before this patch the '_raw_spin_lock_irqsave' and 'update_rq_clock' operands
were appearing just as hexadecimal numbers:
update_blocked_averages /proc/kcore
│ push %r12
│ push %rbx
│ and $0xfffffffffffffff0,%rsp
│ sub $0x40,%rsp
│ add -0x662cac00(,%rdi,8),%rax
│ mov %rax,%rbx
│ mov %rax,%rdi
│ mov %rax,0x38(%rsp)
│ → callq _raw_spin_lock_irqsave
│ mov %rbx,%rdi
│ mov %rax,0x30(%rsp)
│ → callq update_rq_clock
│ mov 0x8d0(%rbx),%rax
│ lea 0x8d0(%rbx),%r11
To check that all is right one can always use the 'o' hotkey and see
the original objdump -dS output, that for this case is:
update_blocked_averages /proc/kcore
│ffffffff990d5489: push %r12
│ffffffff990d548b: push %rbx
│ffffffff990d548c: and $0xfffffffffffffff0,%rsp
│ffffffff990d5490: sub $0x40,%rsp
│ffffffff990d5494: add -0x662cac00(,%rdi,8),%rax
│ffffffff990d549c: mov %rax,%rbx
│ffffffff990d549f: mov %rax,%rdi
│ffffffff990d54a2: mov %rax,0x38(%rsp)
│ffffffff990d54a7: → callq 0xffffffff997eb7a0
│ffffffff990d54ac: mov %rbx,%rdi
│ffffffff990d54af: mov %rax,0x30(%rsp)
│ffffffff990d54b4: → callq 0xffffffff990c7720
│ffffffff990d54b9: mov 0x8d0(%rbx),%rax
│ffffffff990d54c0: lea 0x8d0(%rbx),%r11
Use the 'h' hotkey to see a list of available hotkeys.
More work needed to cover operands for other instructions, such as 'mov',
that can resolve variable names, etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xqgtw9mzmzcjgwkis9kiiv1p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that things like:
→ callq 0xffffffff993e3230
found while disassembling /proc/kcore can be beautified by later
patches, that will resolve that address to a function, looking it up in
/proc/kallsyms.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-p76myuke4j7gplg54amaklxk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Do not ignore call instruction with indirect target when its already
identified as a call. This is an extension of commit e8ea1561952b ("perf
annotate: Use raw form for register indirect call instructions") to
generalize annotation for all instructions with indirect calls.
This is needed for certain powerpc call instructions that use address in
a register (such as bctrl, btarl, ...).
Apart from that, when kcore is used to disassemble function, all call
instructions were ignored. This patch will fix it as a side effect by
not ignoring them. For example,
Before (with kcore):
mov %r13,%rdi
callq 0xffffffff811a7e70
^ jmpq 64
mov %gs:0x7ef41a6e(%rip),%al
After (with kcore):
mov %r13,%rdi
> callq 0xffffffff811a7e70
^ jmpq 64
mov %gs:0x7ef41a6e(%rip),%al
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
[Suggested about 'bctrl' instruction]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Riyder <chris.ryder@arm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Taeung Song <treeze.taeung@gmail.com>
Link: http://lkml.kernel.org/r/1471611578-11255-5-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Adding header size to width computation for srcline sort entry,
because it's possible to get empty data with ':0' which set width
of 2 which is lower than width needed to display column header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1474290610-23241-62-git-send-email-jolsa@kernel.org
[ Added declaration to sort.h ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The function cpufreq_register_driver() returns zero on success and since
commit 27622b061eb4 ("cpufreq: Convert to hotplug state machine")
erroneously a positive number. Due to the "if (x) assume_error" construct
all callers assumed an error and as a consequence the cpu freq kworker
crashes with a NULL pointer dereference.
Reset the return value back to zero in the success case.
Fixes: 27622b061eb4 ("cpufreq: Convert to hotplug state machine")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-and-tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: peterz@infradead.org
Cc: rjw@rjwysocki.net
Link: http://lkml.kernel.org/r/20160920145628.lp2bmq72ip3oiash@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/core
Pull EFI fix from Matt Fleming:
* Fix a boot crash reported by Mike Galbraith and Mike Krinkin. The
new EFI memory map reservation code didn't align reservations to
EFI_PAGE_SIZE boundaries causing bogus regions to be inserted into
the global EFI memory map (Matt Fleming)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into efi/urgent
Pull EFI fixes from Matt Fleming:
* Fix a boot hang on large memory machines (multiple terabyte) caused
by type conversion errors in the x86 PAT code (Matt Fleming)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Mike Galbraith reported that his machine started rebooting during boot
after,
commit 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()")
The ESRT table on his machine is 56 bytes and at no point in the
efi_arch_mem_reserve() call path is that size rounded up to
EFI_PAGE_SIZE, nor is the start address on an EFI_PAGE_SIZE boundary.
Since the EFI memory map only deals with whole pages, inserting an EFI
memory region with 56 bytes results in a new entry covering zero
pages, and completely screws up the calculations for the old regions
that were trimmed.
Round all sizes upwards, and start addresses downwards, to the nearest
EFI_PAGE_SIZE boundary.
Additionally, efi_memmap_insert() expects the mem::range::end value to
be one less than the end address for the region.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Reported-by: Mike Krinkin <krinkin.m.u@gmail.com>
Tested-by: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
Since commit 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection")
my box goes boom on boot:
| .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
| BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
| IP: [<ffffffff8100c463>] intel_bts_interrupt+0x43/0x130
| Call Trace:
| <NMI> d [<ffffffff8100b341>] intel_pmu_handle_irq+0x51/0x4b0
| [<ffffffff81004d47>] perf_event_nmi_handler+0x27/0x40
This happens because the code introduced in this commit dereferences the
debug store pointer unconditionally. The debug store is not guaranteed to
be available, so a NULL pointer check as on other places is required.
Fixes: 4d4c47412464 ("perf/x86/intel/bts: Fix BTS PMI detection")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: vince@deater.net
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20160920131220.xg5pbdjtznszuyzb@breakpoint.cc
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Waiman reported that booting with CONFIG_EFI_MIXED enabled on his
multi-terabyte HP machine results in boot crashes, because the EFI
region mapping functions loop forever while trying to map those
regions describing RAM.
While this patch doesn't fix the underlying hang, there's really no
reason to map EFI_CONVENTIONAL_MEMORY regions into the EFI page tables
when mixed-mode is not in use at runtime.
Reported-by: Waiman Long <waiman.long@hpe.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
CC: Theodore Ts'o <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Cc: <stable@vger.kernel.org> # v4.6+
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
There's a mixture of signed 32-bit and unsigned 32-bit and 64-bit data
types used for keeping track of how many pages have been mapped.
This leads to hangs during boot when mapping large numbers of pages
(multiple terabytes, as reported by Waiman) because those values are
interpreted as being negative.
commit 742563777e8d ("x86/mm/pat: Avoid truncation when converting
cpa->numpages to address") fixed one of those bugs, but there is
another lurking in __change_page_attr_set_clr().
Additionally, the return value type for the populate_*() functions can
return negative values when a large number of pages have been mapped,
triggering the error paths even though no error occurred.
Consistently use 64-bit types on 64-bit platforms when counting pages.
Even in the signed case this gives us room for regions 8PiB
(pebibytes) in size whilst still allowing the usual negative value
error checking idiom.
Reported-by: Waiman Long <waiman.long@hpe.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
CC: Theodore Ts'o <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
|
|
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
The additions of uaccess.h are to deal with implict includes like:
arch/s390/kernel/traps.c: In function 'do_report_trap':
arch/s390/kernel/traps.c:56:4: error: implicit declaration of function 'extable_fixup' [-Werror=implicit-function-declaration]
arch/s390/kernel/traps.c: In function 'illegal_op':
arch/s390/kernel/traps.c:173:3: error: implicit declaration of function 'get_user' [-Werror=implicit-function-declaration]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Export clp.h for usage by userspace.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
"irq" in vmur's int handler can be an error pointer. Don't dereference
this pointer in that case.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The DASD device driver throws change events for the DASD blockdevice
after the online processing is done so that udev rules can take
actions after it.
The change event was missing for unformatted devices.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This enables UBSAN for s390. We have to disable the null sanitizer
as s390 code does access memory via a null pointer (the prefix page).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Some architectures use a hardware defined structure at address zero.
Checking for a null pointer will result in many ubsan reports.
Allow users to disable the null sanitizer.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The combo of list_empty() check and return list_first_entry()
can be replaced with list_first_entry_or_null().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
most unaligned accesses are reasonable efficient (no kernel emulation)
on s390, let's announce it
This also
- removes the ubsan false positives for unaligned accesses on s390 with
default config
- uses simpler arithmetic in several functions in several other areas
of the kernel like ethernet frame classification
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
This patch only reserves two CPU hotplug states for block/mq so the block tree
can apply the conversion patches.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160906170457.32393-20-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Commit fe56b9e6a8d95 ("qed: Add module with basic common support")
has introduced a stack corruption during probe, where filling a
local struct with data to be sent to management firmware is incorrectly
filled; The data is written outside of the struct and corrupts
the stack.
Changes from v1:
----------------
- Correct the value written [Caught by David Laight]
Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support")
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
Log error message if kobject_uevent_env() fails in led_trigger_set().
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If led_trigger_set() is called with "trig" argument set to NULL, and there
is no trigger to remove then the function should return immediately so
as to avoid doing unnecessary allocation and sending uevent.
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reported-by: Daniel Romell <daro@hms.se>
Acked-by Daniel Romell <daro@hms.se>
|
|
The core distributed switch architecture code currently does not have
a MAINTAINERS entry, which results in some contributions not landing
in the right peoples inbox.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop
lookups") introduced a regression: insertion of an IPv6 route in a table
not containing the appropriate connected route for the gateway but which
contained a non-connected route (like a default gateway) fails while it
was previously working:
$ ip link add eth0 type dummy
$ ip link set up dev eth0
$ ip addr add 2001:db8::1/64 dev eth0
$ ip route add ::/0 via 2001:db8::5 dev eth0 table 20
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
RTNETLINK answers: No route to host
$ ip -6 route show table 20
default via 2001:db8::5 dev eth0 metric 1024 pref medium
After this patch, we get:
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
$ ip -6 route show table 20
2001:db8:cafe::1 via 2001:db8::6 dev eth0 metric 1024 pref medium
default via 2001:db8::5 dev eth0 metric 1024 pref medium
Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups")
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All previous users of dump_trace() have been converted to use the new
unwind interfaces, so we can remove it and the related
print_context_stack() and print_context_stack_bp() callback functions.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5b97da3572b40b5a4d8e185cf2429308d0987a13.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has
been deprecated.
show_trace_log_lvl() is special compared to other users of the unwinder.
It's the only place where both reliable *and* unreliable addresses are
needed. With frame pointers enabled, most callers of the unwinder don't
want to know about unreliable addresses. But in this case, when we're
dumping the stack to the console because something presumably went
wrong, the unreliable addresses are useful:
- They show stale data on the stack which can provide useful clues.
- If something goes wrong with the unwinder, or if frame pointers are
corrupt or missing, all the stack addresses still get shown.
So in order to show all addresses on the stack, and at the same time
figure out which addresses are reliable, we have to do the scanning and
the unwinding in parallel.
The scanning is done with the help of get_stack_info() to traverse the
stacks. The unwinding is done separately by the new unwinder.
In theory we could simplify show_trace_log_lvl() by instead pushing some
of this logic into the unwind code. But then we would need some kind of
"fake" frame logic in the unwinder which would add a lot of complexity
and wouldn't be worth it in order to support only one user.
Another benefit of this approach is that once we have a DWARF unwinder,
we should be able to just plug it in with minimal impact to this code.
Another change here is that callers of show_trace_log_lvl() don't need
to provide the 'bp' argument. The unwinder already finds the relevant
frame pointer by unwinding until it reaches the first frame after the
provided stack pointer.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Convert oprofile's x86_backtrace() to use the new unwinder.
dump_trace() has been deprecated.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/412df8927705795e8ea60cffcf89a79e010713b1.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Convert save_stack_trace_*() to use the new unwinder. dump_trace() has
been deprecated.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/815494c627d89887db0ce56ceffd58ad16ee6c21.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Convert perf_callchain_kernel() to use the new unwinder. dump_trace()
has been deprecated.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a2df0c4f09b3d438e11b41681f10b0775a819a7f.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The x86 stack dump code is a bit of a mess. dump_trace() uses
callbacks, and each user of it seems to have slightly different
requirements, so there are several slightly different callbacks floating
around.
Also there are some upcoming features which will need more changes to
the stack dump code, including the printing of stack pt_regs, reliable
stack detection for live patching, and a DWARF unwinder. Each of those
features would at least need more callbacks and/or callback interfaces,
resulting in a much bigger mess than what we have today.
Before doing all that, we should try to clean things up and replace
dump_trace() with something cleaner and more flexible.
The new unwinder is a simple state machine which was heavily inspired by
a suggestion from Andy Lutomirski:
https://lkml.kernel.org/r/CALCETrUbNTqaM2LRyXGRx=kVLRPeY5A3Pc6k4TtQxF320rUT=w@mail.gmail.com
It's also similar to the libunwind API:
http://www.nongnu.org/libunwind/man/libunwind(3).html
Some if its advantages:
- Simplicity: no more callback sprawl and less code duplication.
- Flexibility: it allows the caller to stop and inspect the stack state
at each step in the unwinding process.
- Modularity: the unwinder code, console stack dump code, and stack
metadata analysis code are all better separated so that changing one
of them shouldn't have much of an impact on any of the others.
Two implementations are added which conform to the new unwind interface:
- The frame pointer unwinder which is used for CONFIG_FRAME_POINTER=y.
- The "guess" unwinder which is used for CONFIG_FRAME_POINTER=n. This
isn't an "unwinder" per se. All it does is scan the stack for kernel
text addresses. But with no frame pointers, guesses are better than
nothing in most cases.
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6dc2f909c47533d213d0505f0a113e64585bec82.1474045023.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With the addition of uses of GCC's condition code outputs in commit:
35ccfb7114 ("x86, asm: Use CC_SET()/CC_OUT() in <asm/rwsem.h>")
... there's now an overlap of outputs and clobbers in __down_write_trylock().
Such overlaps are generally getting tagged with an error (occasionally
even with an ICE). I can't really tell why plain GCC 6.2 doesn't detect
this (judging by the code it is meant to), while the slightly modified
one I use does. Since condition code clobbers are never necessary on x86
(other than perhaps for documentation purposes, which doesn't really
get done consistently), remove it altogether rather than inventing
something like CC_CLOBBER (to accompany CC_SET/CC_OUT).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/57E003CC0200007800110102@prv-mh.provo.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Or Gerlitz says:
====================
mlx5 fixes to 4.8-rc6
This series series has a fix from Roi to memory corruption bug in
the bulk flow counters code and two late and hopefully last fixes
from me to the new eswitch offloads code.
Series done over net commit 37dd348 "bna: fix crash in bnad_get_strings()"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
E-switch mode changes involve creating HW tables, potentially allocating
netdevices, etc, and things can fail. Add an attempt to rollback to the
existing mode when changing to the new mode fails. Only if rollback fails,
getting proper SRIOV functionality requires module unload or sriov
disablement/enablement.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When enablement of the SRIOV e-switch in certain mode (switchdev or legacy)
fails, we must set the mode to none. Otherwise, we'll run into double free
based crashes when further attempting to deal with the e-switch (such
as when disabling sriov or unloading the driver).
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The FW command output length should be only the length of struct
mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy
call which is invoked later in the driver to write over wrong memory
address and corrupt kernel memory which results in random crashes.
This bug was found using the kernel address sanitizer (kasan).
Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters')
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls
gic_compute_target_list() which advances the iterator by the number of
CPUs in the cluster.
If gic_compute_target_list() reaches the last CPU it leaves the iterator
pointing at the last CPU. This means the next time round the for_each_cpu()
loop cpumask_next() will be called with an invalid CPU.
This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS:
[ 3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000
[ 3.077943] CPU1: Booted secondary processor [410fd0f0]
[ 3.078542] ------------[ cut here ]------------
[ 3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170
[ 3.078812] Modules linked in:
[ 3.078869]
[ 3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188
[ 3.078994] Hardware name: Foundation-v8A (DT)
[ 3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000
[ 3.079145] PC is at gic_raise_softirq+0x12c/0x170
[ 3.079226] LR is at gic_raise_softirq+0xa4/0x170
[ 3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9
[ 3.081139] Call trace:
[ 3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10)
[ 3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170
[ 3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40
[ 3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88
[ 3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0
[ 3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8
[ 3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0
[ 3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370
[ 3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18
[ 3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0
[ 3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20
[ 3.083086] [<ffff000008103f80>] complete+0x40/0x60
[ 3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0
[ 3.083240] [<00000000808911a4>] 0x808911a4
[ 3.113401] Detected PIPT I-cache on CPU2
Avoid updating the iterator if the next call to cpumask_next() would
cause the for_each_cpu() loop to exit.
There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s
eventual call to _find_next_bit() will return early as start >= nbits),
this patch just silences the warning.
Fixes: 021f653791ad ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
The Intel PT facility grew some new functionality:
* PTWRITE packet carries the payload of the new PTWRITE instruction
that can be used to instrument Intel PT traces with user-supplied
data. Packets of this type are only generated if 'ptwrite' capability
is set and PTWEn bit is set in the event attribute's config. Flow
update packets (FUP) can be generated on PTWRITE packets if FUPonPTW
config bit is set. Setting these bits is not allowed if 'ptwrite'
capability is not set.
* PWRE, PWRX, MWAIT, EXSTOP packets communicate core power management
events. These depend on 'power_event_tracing' capability and are
enabled by setting PwrEvtEn bit in the event attribute.
Extend the driver capabilities and provide the proper sanity checks in the
event validation function.
[ tglx: Massaged changelog ]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: vince@deater.net
Cc: eranian@google.com
Cc: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/20160916134819.1978-1-alexander.shishkin@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Merge fixes from Andrew Morton:
"20 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rapidio/rio_cm: avoid GFP_KERNEL in atomic context
Revert "ocfs2: bump up o2cb network protocol version"
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
cgroup: duplicate cgroup reference when cloning sockets
mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting
ocfs2: fix double unlock in case retry after free truncate log
fanotify: fix list corruption in fanotify_get_response()
fsnotify: add a way to stop queueing events on group shutdown
ocfs2: fix trans extend while free cached blocks
ocfs2: fix trans extend while flush truncate log
ipc/shm: fix crash if CONFIG_SHMEM is not set
mm: fix the page_swap_info() BUG_ON check
autofs: use dentry flags to block walks during expire
MAINTAINERS: update email for VLYNQ bus entry
mm: avoid endless recursion in dump_page()
mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin()
khugepaged: fix use-after-free in collapse_huge_page()
MAINTAINERS: Maik has moved
ocfs2/dlm: fix race between convert and migration
mem-hotplug: don't clear the only node in new_node_page()
|
|
These files were only including module.h for exception table related
functions. We've now separated that content out into its own file
"extable.h" so now move over to that and avoid all the extra header content
in module.h that we don't really need to compile these files.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/20160919210418.30243-1-paul.gortmaker@windriver.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
commit aa297292d708 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via
CPUID") added code to retrieve the crystal and TSC frequency from CPUID
leaves. If the crystal freqency is enumerated as 0,the resulting TSC
frequency is 0 as well. For CPUs with a known fixed crystal frequency a
quirk list is available to set the frequency,
Kabylake and SkylakeX CPUs are missing in the list of CPUs which need this
quirk. Add them so the TSC frequency can be calculated correctly.
[ tglx: Removed the silly default case as the switch() is only invoked when
cpu_khz is 0. Massaged changelog. ]
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/1474289501-31717-3-git-send-email-prarit@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
asm/intel-family.h contains defines for cpu ids which should be used
instead of hex constants. Convert the switch case in native_calibrate_tsc()
to use the defines before adding more cpu models.
[ tglx: Massaged changelog ]
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/1474289501-31717-2-git-send-email-prarit@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737):
riocm_send_close() is called from rio_cm_shutdown() under
spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL
allocation.
Fix by taking riocm_send_close() outside of spinlock protected code.
[akpm@linux-foundation.org: remove unneeded `if (!list_empty())']
Link: http://lkml.kernel.org/r/20160915175402.10122-1-alexandre.bounine@idt.com
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 38b52efd218b ("ocfs2: bump up o2cb network protocol
version").
This commit made rolling upgrade fail. When one node is upgraded to new
version with this commit, the remaining nodes will fail to establish
connections to it, then the application like VMs on the remaining nodes
can't be live migrated to the upgraded one. This will cause an outage.
Since negotiate hb timeout behavior didn't change without this commit,
so revert it.
Fixes: 38b52efd218bf ("ocfs2: bump up o2cb network protocol version")
Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If we punch a hole on a reflink such that following conditions are met:
1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
(hole range > MAX_CONTIG_BYTES(1MB)),
we dont COW the first cluster starting at the start offset. But in this
case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out. This will modify the
cluster in place and zero it in the source too.
Fix this by skipping this cluster in such a scenario.
To reproduce:
1. Create a random file of say 10 MB
xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink it
reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the first cluster in the source file. (It will be zeroed out).
dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C
Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reported-by: Saar Maoz <saar.maoz@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When a socket is cloned, the associated sock_cgroup_data is duplicated
but not its reference on the cgroup. As a result, the cgroup reference
count will underflow when both sockets are destroyed later on.
Fixes: bd1060a1d671 ("sock, cgroup: add sock->sk_cgroup")
Link: http://lkml.kernel.org/r/20160914194846.11153-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
