summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-09-14arm64: pgtable: use a single bit for PTE_WRITE regardless of DBMWill Deacon
Depending on CONFIG_ARM64_HW_AFDBM, we use either bit 57 or 51 of the pte to represent PTE_WRITE. Given that bit 51 is reserved prior to ARMv8.1, we can just use that bit regardless of the config option. That also matches what happens if a kernel configured with ARM64_HW_AFDBM=y is run on a CPU without the DBM functionality. Cc: Julien Grall <julien.grall@citrix.com> Tested-by: Julien Grall <julien.grall@citrix.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-09-14arm64: Fix pte_modify() to preserve the hardware dirty informationCatalin Marinas
The pte_modify() function with hardware AF/DBM enabled must transfer the hardware dirty information to the software PTE_DIRTY bit. However, it was setting this bit in newprot and the mask does not cover such bit. This patch sets PTE_DIRTY on the original pte which will be preserved in the returned value. Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Cc: Julien Grall <julien.grall@citrix.com> Tested-by: Julien Grall <julien.grall@citrix.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-09-14arm64: Fix the pte_hw_dirty() check when AF/DBM is enabledCatalin Marinas
Commit 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") introduced support for handling hardware updates of the access flag and dirty status. The PTE is automatically dirtied in hardware (if supported) by clearing the PTE_RDONLY bit when the PTE_DBM/PTE_WRITE bit is set. The pte_hw_dirty() macro was added to detect a hardware dirtied pte. The pte_dirty() macro checks for both software PTE_DIRTY and pte_hw_dirty(). Functions like pte_modify() clear the PTE_RDONLY bit since it is meant to be set in set_pte_at() when written to memory. In such cases, pte_hw_dirty() would return true even though such pte is clean. This patch changes pte_hw_dirty() to test the PTE_DBM/PTE_WRITE bit together with PTE_RDONLY. Fixes: 2f4b829c625e ("arm64: Add support for hardware updates of the access and dirty pte bits") Reported-by: Julien Grall <julien.grall@citrix.com> Tested-by: Julien Grall <julien.grall@citrix.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-09-14arm64: dma-mapping: check whether cma area is initialized or notJisheng Zhang
If CMA is turned on and CMA size is set to zero, kernel should behave as if CMA was not enabled at compile time. Every dma allocation should check existence of cma area before requesting memory. Arm has done this by commit e464ef16c4f0 ("arm: dma-mapping: add checking cma area initialized"), also do this for arm64. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-09-14x86/ldt: Fix small LDT allocation for XenJan Beulich
While the following commit: 37868fe113 ("x86/ldt: Make modify_ldt synchronous") added a nice comment explaining that Xen needs page-aligned whole page chunks for guest descriptor tables, it then nevertheless used kzalloc() on the small size path. As I'm unaware of guarantees for kmalloc(PAGE_SIZE, ) to return page-aligned memory blocks, I believe this needs to be switched back to __get_free_page() (or better get_zeroed_page()). Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/55E735D6020000780009F1E6@prv-mh.provo.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-14clockevents: Remove unused set_mode() callbackViresh Kumar
All users are migrated to the per-state callbacks, get rid of the unused interface and the core support code. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linaro-kernel@lists.linaro.org Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/fd60de14cf6d125489c031207567bb255ad946f6.1441943991.git.viresh.kumar@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-14x86/vm86: Fix the misleading CONFIG_VM86 Kconfig help textIngo Molnar
The CONFIG_VM86 Kconfig help text is actively misleading, so fix it: - Don't mark it 'obsolete' in the text as we'll support the ABI as long as CPUs support it. - Qualify the part about software emulation and mention that for some apps you want a real vm86 mode. - Don't scare users away from the option, instead explain what it does. Reported-by: Stas Sergeev <stsp@list.ru> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Austin S Hemmelgarn <ahferroin7@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-14soc: dove: Prepare irq handler for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-09-14soc: dove: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descThomas Gleixner
Search and replace done with coccinelle Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-09-14powerpc/cell: Prepare irq handler for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linuxppc-dev@lists.ozlabs.org
2015-09-14powerpc/85xx: Prepare irq handlers for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Scott Wood <scottwood@freescale.com> Cc: linuxppc-dev@lists.ozlabs.org
2015-09-14powerpc/mpc5121_ads_cpld: Prepare irq handler for irq argument removalThomas Gleixner
The irq argument of most interrupt flow handlers is unused or merily used instead of a local variable. The handlers which need the irq argument can retrieve the irq number from the irq descriptor. Search and update was done with coccinelle and the invaluable help of Julia Lawall. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: linuxppc-dev@lists.ozlabs.org
2015-09-14drm/vmwgfx: Map the fifo as cachedThomas Hellstrom
On the guest kernel side, previously the FIFO has been mapped write- combined. This has worked since VMs up to now has not honored the mapping type and mapped the FIFO cached anyway. Since the FIFO is accessed cached by the CPU on the virtual device side, this leads to inconsistent mappings once the guest starts to honor the mapping types. So ask for cached mappings when we map the FIFO. We do this by using ioremap_cache() instead of ioremap_wc(), and remove the MTRR setup. On the TTM side, MOBs, GMRs and VRAM buffers are already requesting cached mappings for kernel- and user-space. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-09-14drm/vmwgfx: Fix up user_dmabuf refcountingThomas Hellstrom
If user space calls unreference on a user_dmabuf it will typically kill the struct ttm_base_object member which is responsible for the user-space visibility. However the dmabuf part may still be alive and refcounted. In some situations, like for shared guest-backed surface referencing/opening, the driver may try to reference the struct ttm_base_object member again, causing an immediate kernel warning and a later kernel NULL pointer dereference. Fix this by always maintaining a reference on the struct ttm_base_object member, in situations where it might subsequently be referenced. Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Brian Paul <brianp@vmware.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com>
2015-09-14USB: option: add ZTE PIDsLiu.Zhao
This is intended to add ZTE device PIDs on kernel. Signed-off-by: Liu.Zhao <lzsos369@163.com> Cc: stable <stable@vger.kernel.org> [johan: sort the new entries ] Signed-off-by: Johan Hovold <johan@kernel.org>
2015-09-14Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - The values of _SC_NPROCESSORS_CONF and _SC_NPROCESSORS_ONLN (sysconf(3)) were being read from perf.data files in the inverse order they are written, fix it. (Arnaldo Carvalho de Melo) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-09-14pinctrl: samsung: s3c24xx: fix syntax errorLinus Walleij
?SYNTAX ERROR irq_desc_get_irq_chip() does not exist. It should be irq_desc_get_chip(). Tested by compiling s3c2410_defconfig. Cc: Thomas Gleixner <tglx@linutronix.de> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: core: Warn about NULL gpio_chip in pinctrl_ready_for_gpio_range()Tony Lindgren
If the gpio driver is confused about the numbers for gpio-ranges, pinctrl_ready_for_gpio_range() may get called with invalid GPIO causing a NULL pointer exception. Let's instead provide a warning that allows fixing the problem and return with error. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: join lines that can be a single line within 80 columnsMasahiro Yamada
There is no reason to break a line shorter than 80 columns. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: digicolor: convert null test to IS_ERR testJulia Lawall
Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update a driver that was introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14pinctrl: qcom: ssbi: convert null test to IS_ERR testJulia Lawall
Since commit 323de9efdf3e ("pinctrl: make pinctrl_register() return proper error code"), pinctrl_register returns an error code rather than NULL on failure. Update some drivers that were introduced more recently. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e,e1,e2; @@ e = pinctrl_register(...) ... when != e = e1 if ( - e == NULL + IS_ERR(e) ) { ... return - e2 + PTR_ERR(e) ; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: omap: Fix GPIO numbering for deferred probeTony Lindgren
If gpio-omap probe fails with -EPROBE_DEFER, the GPIO numbering keeps increasing. Only increase the gpio count if gpiochip_add() was successful as otherwise the numbers will increase for each probe attempt. Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14Documentation: gpio: Explain that <function>-gpio is also supportedJavier Martinez Canillas
The GPIO documentation mentions that GPIOs are mapped by defining a <function>-gpios property in the consumer device's node but a -gpio sufix is also supported after commit: dd34c37aa3e8 ("gpio: of: Allow -gpio suffix for property names") Update the documentation to match the implementation. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: omap: Fix gpiochip_add() handling for deferred probeTony Lindgren
Currently we gpio-omap breaks if gpiochip_add() returns -EPROBE_DEFER: [ 0.570000] gpiochip_add: GPIOs 0..31 (gpio) failed to register [ 0.570000] omap_gpio 48310000.gpio: Could not register gpio chip -517 ... [ 3.670000] omap_gpio 48310000.gpio: Unbalanced pm_runtime_enable! Let's fix the issue by adding the missing pm_runtime_put() on error. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Javier Martinez Canillas <javier@dowhile0.org> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: sx150x: Remove unnecessary MODULE_ALIAS()Javier Martinez Canillas
The driver has a I2C device id table that is used to create the module aliases and also "sx150x" isn't a supported I2C id, so it's never used. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14Documentation: gpio: board: describe the con_id parameterDirk Behme
The con_id parameter has to match the GPIO description and is automatically extended by the GPIO suffix if not NULL. I had to look into the code to understand this and properly find the GPIO I've been looking for, so document this. Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14Documentation: gpio: board: add flags parameter to gpiod_get*() functionsDirk Behme
With commit 39b2bbe3d715 ("gpio: add flags argument to gpiod_get*() functions") the gpiod_get*() functions got a 'flags' parameter. Reflect this in the documentation, too. Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: Propagate errors from chip->get()Bjorn Andersson
It's possible to have gpio chips hanging off unreliable remote buses where the get() operation will fail to acquire a readout of the current gpio state. Propagate these errors to the consumer so that they can act on, retry or ignore these failing reads, instead of treating them as the line being held high. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: rcar: GPIO_RCAR doesn't relate to ARMKuninori Morimoto
8cd1470("gpio: rcar: Add r8a7795 (R-Car H3) support") added GPIO support for r8a7795. r8a7795 based on CONFIG_ARM64. OTOH, GPIO_RCAR driver can be compiled fine on non-ARM. This patch removed ARM dependency for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: mxs: need to check return value of irq_alloc_generic_chipPeng Fan
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxs_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-14gpio: mxc: need to check return value of irq_alloc_generic_chipPeng Fan
Need to check return value of irq_alloc_generic_chip, because it may return NULL. 1. Change mxc_gpio_init_gc return type from void to int. 2. Add a new lable out_irqdomain_remove to remove the irq domain when mxc_gpio_init_gc fail. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> [Manually rebased] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-13thermal: cpu_cooling: free power table on error or when unregisteringJavi Merino
The power table is not being freed on error from cpufreq_cooling register or when unregistering. Free it. Fixes: c36cf0717631 ("thermal: cpu_cooling: implement the power cooling device API") Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: cpu_cooling: don't call kcalloc() under rcu_read_lockJavi Merino
build_dyn_power_table() allocates the power table while holding rcu_read_lock. kcalloc using GFP_KERNEL may sleep, so it can't be called in an RCU read-side path. Move the rcu protection to the part of the function that really needs it: the part that handles the dev_pm_opp pointer received from dev_pm_opp_find_freq_ceil(). In the unlikely case that there is an OPP added to the cpu while this function is running, return -EAGAIN. Fixes: c36cf0717631 ("thermal: cpu_cooling: implement the power cooling device API") Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: db8500_cpufreq_cooling: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: cpu_cooling: Add MAINTAINERS entryViresh Kumar
None of the patches are reaching Viresh or Daniel directly as get_maintainers doesn't report us as maintainers. Looks like file header or history of commits isn't able to do that properly. Add a separate entry for cpu_cooling driver in MAINTAINERS. Acked-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Amit Daniel Kachhap <amit.kachhap@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: Kconfig fix to avoid menu showing wronglyEduardo Valentin
Move the dependencies to menu, so we avoid showing it wrongly. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to ti-soc driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: qcom_spmi: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to qcom_spmi driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: exynos: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to exynos driver to facilitate maintenance. Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: armada: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to armada driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: dove: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to dove driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: kirkwood: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to kirkwood driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: rockchip: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to rockchip driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-pm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: spear: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to spear driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: hisi: allow compile testEduardo Valentin
Adding COMPILE_TEST flag to hisi driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: Fix thermal_zone_of_sensor_register to match documentationPunit Agrawal
thermal_zone_of_sensor_register is documented as returning a pointer to either a valid thermal_zone_device on success, or a corresponding ERR_PTR() value. In contrast, the function returns NULL when THERMAL_OF is configured off. Fix this. Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13dm thin: disable discard support for thin devices if pool's is disabledMike Snitzer
If the pool is configured with 'ignore_discard' its discard support is disabled. The pool's thin devices should also have queue_limits that reflect discards are disabled. Fixes: 34fbcf62 ("dm thin: range discard support") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 4.1+
2015-09-14drivers: sh: Disable PM runtime for multi-platform ARM with genpdGeert Uytterhoeven
If the default PM Domain using PM_CLK is used for PM runtime, the real Clock Domain cannot be registered from DT later. Hence do not enable it when running a multi-platform kernel with genpd support on R-Car or RZ. The CPG/MSTP Clock Domain driver will take care of PM runtime management of the module clocks. Now most multi-platform ARM shmobile platforms (SH-Mobile, R-Mobile, R-Car, RZ) use DT-based PM Domains to take care of PM runtime management of the module clocks, simplify the platform logic by replacing the explicit SoC checks by a single check for the presence of MSTP clocks in DT. Backwards-compatiblity with old DTs (mainly for R-Car Gen2) is provided by checking for the presence of a "#power-domain-cells" property in DT. The default PM Domain is still needed for: - backwards-compatibility with old DTs that lack PM Domain properties, - the CONFIG_PM=n case, - legacy (non-DT) ARM/shmobile platforms without genpd support (r8a7778, r8a7779), - legacy SuperH. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-14drivers: sh: Disable legacy default PM Domain on emev2Geert Uytterhoeven
EMMA Mobile EV2 doesn't have MSTP clocks. All its device drivers manage clocks explicitly, without relying on Runtime PM, so it doesn't need the legacy default PM Domain. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-14ARM: EXYNOS: reset Little cores when cpu is upChanho Park
The cpu booting of exynos5422 has been still broken since we discussed it in last year[1]. This patch is inspired from Odroid XU3 code (Actually, it was from samsung exynos vendor kernel)[2]. This weird reset code was founded exynos5420 octa cores series SoCs and only required for the first boot core is the Little core (Cortex A7). Some of the exynos5420 boards and all of the exynos5422 boards will require this code. There is two ways to check the little core is the first cpu. One is checking GPG2CON[1] GPIO value and the other is checking the cluster number of the first cpu. I selected the latter because it's more easier than the former. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-June/350632.html [2] https://patchwork.kernel.org/patch/6782891/ Cc: Kevin Hilman <khilman@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Chanho Park <parkch98@gmail.com> Cc: <stable@vger.kernel.org> # 4.1+ [k.kozlowski: Adding stable for v4.1+, reformat comment] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
generated by cgit (git 2.34.1) at 2025-09-15 09:19:28 +0000