| Age | Commit message (Collapse) | Author |
|---|
|
* pm-cpuidle:
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
* pm-cpufreq:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
|
|
Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent
SET FEATURES command from being issued to a drive when NCQ commands
are active.
ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED
flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES
gets deferred due to outstanding NCQ commands, the original MODE SELECT
command will be re-queued. When the re-queued MODE SELECT goes through
the ata_mselect_control_ata_feature() translation again, SET FEATURES
will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or
cleared by the initial translation of MODE SELECT.
The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature()
are safe to remove because scsi_cdl_enable() implements a similar logic
that avoids enabling CDL if it has been enabled already.
Fixes: 17e897a45675 ("ata: libata-scsi: Improve CDL control")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Make video port registers nonvolatile. As DSP_CTRL register is written
to twice due to gamma LUT enable bit which is set outside of the main
DSP_CTRL initialization within atomic_enable (for rk356x case it is also
necessary to always disable gamma LUT before writing a new LUT) there is
a chance that DSP_CTRL value read-out in gamma LUT init/update code is
not the one which was written by the preceding DSP_CTRL initialization
code within atomic_enable. This might result in misconfigured DSP_CTRL
which leads to no visual output[1]. Since DSP_CTRL write takes effect
after VSYNC[1] the issue is not always present. When tested on Pinetab2
with kernel 6.14 it happenes only when DRM is compiled as a module[1].
In order to confirm that it is a timing issue I inserted 18ms udelay
before vop2_crtc_atomic_try_set_gamma in atomic enable and compiled DRM
as module - this has also fixed the issue.
[1] https://lore.kernel.org/linux-rockchip/562b38e5.a496.1975f09f983.Coremail.andyshrk@163.com/
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Closes: https://lore.kernel.org/linux-rockchip/DAEVDSTMWI1E.J454VZN0R9MA@cknow.org/
Suggested-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250706083629.140332-2-pZ010001011111@proton.me
|
|
Select drm bridge connector when building cdp-dp.
This was missed in previous commit causing build failure.
Fixes: afbbca25d06e ("drm/rockchip: cdn-dp: Convert to drm bridge")
Signed-off-by: Rudi Heitbaum <rudi@heitbaum.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/aJrlUzV1u4i65NRe@8eba3d7b3083
|
|
Commit 4371fe1ba400 ("ata: libata-eh: Avoid unnecessary resets when
revalidating devices") replaced the call to ata_phys_link_offline() in
ata_eh_revalidate_and_attach() with the new function
ata_eh_link_established() which relaxes the checks on a device link
state to account for low power mode transitions. However, this change
assumed that the device port has a valid scr_read method to obtain the
SStatus register for the port. This is not always the case, especially
with older IDE/PATA adapters (e.g. PATA/IDE devices emulated with QEMU).
For such adapter, ata_eh_link_established() will always return false,
causing ata_eh_revalidate_and_attach() to go into its error path and
ultimately to the device being disabled.
Avoid this by restoring the previous behavior, which is to assume that
the link is online if reading the port SStatus register fails.
While at it, also fix the spelling of SStatus in the comment describing
the function ata_eh_link_established().
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 4371fe1ba400 ("ata: libata-eh: Avoid unnecessary resets when revalidating devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Change the name of the kcontrol from "Gain" to "Volume".
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250813100842.12224-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Fixes: 11785ef53228 ("ALSA: usb-audio: Initial Power Domain support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
UAC3 power domain descriptors need to be verified with its variable
bLength for avoiding the unexpected OOB accesses by malicious
firmware, too.
Fixes: 9a2fe9b801f5 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A reasonably small collection of fixes that came in since the merge
window, mostly small and driver specific plus a cleanup of the menu
reorganisation to address some user confusion with the way the generic
drivers had been handled.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- MAINTAINERS: Remove bouncing kprobes maintainer
* tag 'probes-fixes-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Remove bouncing kprobes maintainer
|
|
The kprobes MAINTAINERS entry includes anil.s.keshavamurthy@intel.com.
That address is bouncing. Remove it.
This still leaves three other listed maintainers.
Link: https://lore.kernel.org/all/20250808180124.7DDE2ECD@davehans-spike.ostc.intel.com/
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
syzbot found a race condition when kcm_unattach(psock)
and kcm_release(kcm) are executed at the same time.
kcm_unattach() is missing a check of the flag
kcm->tx_stopped before calling queue_work().
If the kcm has a reserved psock, kcm_unattach() might get executed
between cancel_work_sync() and unreserve_psock() in kcm_release(),
requeuing kcm->tx_work right before kcm gets freed in kcm_done().
Remove kcm->tx_stopped and replace it by the less
error-prone disable_work_sync().
Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+e62c9db591c30e174662@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e62c9db591c30e174662
Reported-by: syzbot+d199b52665b6c3069b94@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d199b52665b6c3069b94
Reported-by: syzbot+be6b1fdfeae512726b4e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=be6b1fdfeae512726b4e
Signed-off-by: Sven Stegemann <sven@stegemann.de>
Link: https://patch.msgid.link/20250812191810.27777-1-sven@stegemann.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Davide Caratti says:
====================
ets: use old 'nbands' while purging unused classes
- patch 1/2 fixes a NULL dereference in the control path of sch_ets qdisc
- patch 2/2 extends kselftests to verify effectiveness of the above fix
====================
Link: https://patch.msgid.link/cover.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend sch_ets.sh to add a reproducer for problematic list deletions when
active DWRR class are purged by ets_qdisc_change() [1] [2].
[1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/f3b9bacc73145f265c19ab80785933da5b7cbdec.1754581577.git.dcaratti@redhat.com/
Suggested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/489497cb781af7389011ca1591fb702a7391f5e7.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Shuang reported sch_ets test-case [1] crashing in ets_class_qlen_notify()
after recent changes from Lion [2]. The problem is: in ets_qdisc_change()
we purge unused DWRR queues; the value of 'q->nbands' is the new one, and
the cleanup should be done with the old one. The problem is here since my
first attempts to fix ets_qdisc_change(), but it surfaced again after the
recent qdisc len accounting fixes. Fix it purging idle DWRR queues before
assigning a new value of 'q->nbands', so that all purge operations find a
consistent configuration:
- old 'q->nbands' because it's needed by ets_class_find()
- old 'q->nstrict' because it's needed by ets_class_is_strict()
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 62 UID: 0 PID: 39457 Comm: tc Kdump: loaded Not tainted 6.12.0-116.el10.x86_64 #1 PREEMPT(voluntary)
Hardware name: Dell Inc. PowerEdge R640/06DKY5, BIOS 2.12.2 07/09/2021
RIP: 0010:__list_del_entry_valid_or_report+0x4/0x80
Code: ff 4c 39 c7 0f 84 39 19 8e ff b8 01 00 00 00 c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <48> 8b 17 48 8b 4f 08 48 85 d2 0f 84 56 19 8e ff 48 85 c9 0f 84 ab
RSP: 0018:ffffba186009f400 EFLAGS: 00010202
RAX: 00000000000000d6 RBX: 0000000000000000 RCX: 0000000000000004
RDX: ffff9f0fa29b69c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffffc12c2400 R08: 0000000000000008 R09: 0000000000000004
R10: ffffffffffffffff R11: 0000000000000004 R12: 0000000000000000
R13: ffff9f0f8cfe0000 R14: 0000000000100005 R15: 0000000000000000
FS: 00007f2154f37480(0000) GS:ffff9f269c1c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000001530be001 CR4: 00000000007726f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
ets_class_qlen_notify+0x65/0x90 [sch_ets]
qdisc_tree_reduce_backlog+0x74/0x110
ets_qdisc_change+0x630/0xa40 [sch_ets]
__tc_modify_qdisc.constprop.0+0x216/0x7f0
tc_modify_qdisc+0x7c/0x120
rtnetlink_rcv_msg+0x145/0x3f0
netlink_rcv_skb+0x53/0x100
netlink_unicast+0x245/0x390
netlink_sendmsg+0x21b/0x470
____sys_sendmsg+0x39d/0x3d0
___sys_sendmsg+0x9a/0xe0
__sys_sendmsg+0x7a/0xd0
do_syscall_64+0x7d/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f2155114084
Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d 25 f0 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
RSP: 002b:00007fff1fd7a988 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000560ec063e5e0 RCX: 00007f2155114084
RDX: 0000000000000000 RSI: 00007fff1fd7a9f0 RDI: 0000000000000003
RBP: 00007fff1fd7aa60 R08: 0000000000000010 R09: 000000000000003f
R10: 0000560ee9b3a010 R11: 0000000000000202 R12: 00007fff1fd7aae0
R13: 000000006891ccde R14: 0000560ec063e5e0 R15: 00007fff1fd7aad0
</TASK>
[1] https://lore.kernel.org/netdev/e08c7f4a6882f260011909a868311c6e9b54f3e4.1639153474.git.dcaratti@redhat.com/
[2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/
Cc: stable@vger.kernel.org
Fixes: 103406b38c60 ("net/sched: Always pass notifications when child class becomes empty")
Fixes: c062f2a0b04d ("net/sched: sch_ets: don't remove idle classes from the round-robin list")
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Reported-by: Li Shuang <shuali@redhat.com>
Closes: https://issues.redhat.com/browse/RHEL-108026
Reviewed-by: Petr Machata <petrm@nvidia.com>
Co-developed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/7928ff6d17db47a2ae7cc205c44777b1f1950545.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
ixgbe: bypass devlink phys_port_name generation
Jedrzej adds option to skip phys_port_name generation and opts
ixgbe into it as some configurations rely on pre-devlink naming
which could end up broken as a result.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
====================
Link: https://patch.msgid.link/20250812205226.1984369-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The data page pool always fills the HW rx ring with pages. On arm64 with
64K pages, this will waste _at least_ 32K of memory per entry in the rx
ring.
Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This
makes the data page pool the same as the header pool.
Tested with iperf3 with a small (64 entries) rx ring to encourage buffer
circulation.
Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported the splat below. [0]
When nsim_queue_uninit() is called from nsim_init_netdevsim(),
register_netdevice() has not been called, thus dev->dstats has
not been allocated.
Let's not call dev_dstats_rx_dropped_add() in such a case.
[0]
BUG: unable to handle page fault for address: ffff88809782c020
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
PGD 1b401067 P4D 1b401067 PUD 0
Oops: Oops: 0002 [#1] SMP KASAN NOPTI
CPU: 3 UID: 0 PID: 8476 Comm: syz.1.251 Not tainted 6.16.0-syzkaller-06699-ge8d780dcd957 #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:local_add arch/x86/include/asm/local.h:33 [inline]
RIP: 0010:u64_stats_add include/linux/u64_stats_sync.h:89 [inline]
RIP: 0010:dev_dstats_rx_dropped_add include/linux/netdevice.h:3027 [inline]
RIP: 0010:nsim_queue_free+0xba/0x120 drivers/net/netdevsim/netdev.c:714
Code: 07 77 6c 4a 8d 3c ed 20 7e f1 8d 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 46 4a 03 1c ed 20 7e f1 8d <4c> 01 63 20 be 00 02 00 00 48 8d 3d 00 00 00 00 e8 61 2f 58 fa 48
RSP: 0018:ffffc900044af150 EFLAGS: 00010286
RAX: dffffc0000000000 RBX: ffff88809782c000 RCX: 00000000000079c3
RDX: 1ffffffff1be2fc7 RSI: ffffffff8c15f380 RDI: ffffffff8df17e38
RBP: ffff88805f59d000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000003 R14: ffff88806ceb3d00 R15: ffffed100dfd308e
FS: 0000000000000000(0000) GS:ffff88809782c000(0063) knlGS:00000000f505db40
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: ffff88809782c020 CR3: 000000006fc6a000 CR4: 0000000000352ef0
Call Trace:
<TASK>
nsim_queue_uninit drivers/net/netdevsim/netdev.c:993 [inline]
nsim_init_netdevsim drivers/net/netdevsim/netdev.c:1049 [inline]
nsim_create+0xd0a/0x1260 drivers/net/netdevsim/netdev.c:1101
__nsim_dev_port_add+0x435/0x7d0 drivers/net/netdevsim/dev.c:1438
nsim_dev_port_add_all drivers/net/netdevsim/dev.c:1494 [inline]
nsim_dev_reload_create drivers/net/netdevsim/dev.c:1546 [inline]
nsim_dev_reload_up+0x5b8/0x860 drivers/net/netdevsim/dev.c:1003
devlink_reload+0x322/0x7c0 net/devlink/dev.c:474
devlink_nl_reload_doit+0xe31/0x1410 net/devlink/dev.c:584
genl_family_rcv_msg_doit+0x206/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x55c/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1346
netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg net/socket.c:729 [inline]
____sys_sendmsg+0xa95/0xc70 net/socket.c:2614
___sys_sendmsg+0x134/0x1d0 net/socket.c:2668
__sys_sendmsg+0x16d/0x220 net/socket.c:2700
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0x7c/0x3a0 arch/x86/entry/syscall_32.c:306
do_fast_syscall_32+0x32/0x80 arch/x86/entry/syscall_32.c:331
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
RIP: 0023:0xf708e579
Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00
RSP: 002b:00000000f505d55c EFLAGS: 00000296 ORIG_RAX: 0000000000000172
RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 0000000080000080
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Modules linked in:
CR2: ffff88809782c020
Fixes: 2a68a22304f9 ("netdevsim: account dropped packet length in stats on queue free")
Reported-by: syzbot+8aa80c6232008f7b957d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/688bb9ca.a00a0220.26d0e1.0050.GAE@google.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250812162130.4129322-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kunit test's skb_pkt is consumed by mctp_dst_input() so shouldn't be
freed separately.
Fixes: e6d8e7dbc5a3 ("net: mctp: Add bind lookup test")
Reported-by: Alexandre Ghiti <alex@ghiti.fr>
Closes: https://lore.kernel.org/all/734b02a3-1941-49df-a0da-ec14310d41e4@ghiti.fr/
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://patch.msgid.link/20250812-fix-mctp-bind-test-v1-1-5e2128664eb3@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the data argument of Devres::new() is Err(), we leak the preceding
call to devm_add_action().
In order to fix this, call devm_add_action() in a unit type initializer in
try_pin_init!() after the initializers of all other fields.
Fixes: f5d3ef25d238 ("rust: devres: get rid of Devres' inner Arc")
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250812130928.11075-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.17-2025-08-13:
amdgpu:
- PSP fix
- VRAM reservation fix
- CSA fix
- Process kill fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250813151905.2040816-1-alexander.deucher@amd.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for *net*:
1) I managed to add a null dereference crash in nft_set_pipapo
in the current development cycle, was not caught by CI
because the avx2 implementation is fine, but selftest
splats when run on non-avx2 host.
2) Fix the ipvs estimater kthread affinity, was incorrect
since 6.14. From Frederic Weisbecker.
3) nf_tables should not allow to add a device to a flowtable
or netdev chain more than once -- reject this.
From Pablo Neira Ayuso. This has been broken for long time,
blamed commit dates from v5.8.
* tag 'nf-25-08-13' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
====================
Link: https://patch.msgid.link/20250813113800.20775-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
bridge:
- fix OF-node leak
- fix documentation
fbdev-emulation:
- pass correct format info to drm_helper_mode_fill_fb_struct()
panfrost:
- print correct RSS size
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250812064712.GA14554@2a02-2454-fd5e-fd00-2c49-c639-c55f-a125.dyn6.pyur.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Align FSDAX enablement among multiple devices
- Fix EROFS_FS_ZIP_ACCEL build dependency again to prevent forcing
CRYPTO{,_DEFLATE}=y even if EROFS=m
- Fix atomic context detection to properly launch kworkers on demand
- Fix block count statistics for 48-bit addressing support
* tag 'erofs-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix block count report when 48-bit layout is on
erofs: fix atomic context detection when !CONFIG_DEBUG_LOCK_ALLOC
erofs: Do not select tristate symbols from bool symbols
erofs: Fallback to normal access if DAX is not supported on extra device
|
|
Both jbd2_log_do_checkpoint() and jbd2_journal_shrink_checkpoint_list()
periodically release j_list_lock after processing a batch of buffers to
avoid long hold times on the j_list_lock. However, since both functions
contend for j_list_lock, the combined time spent waiting and processing
can be significant.
jbd2_journal_shrink_checkpoint_list() explicitly calls cond_resched() when
need_resched() is true to avoid softlockups during prolonged operations.
But jbd2_log_do_checkpoint() only exits its loop when need_resched() is
true, relying on potentially sleeping functions like __flush_batch() or
wait_on_buffer() to trigger rescheduling. If those functions do not sleep,
the kernel may hit a softlockup.
watchdog: BUG: soft lockup - CPU#3 stuck for 156s! [kworker/u129:2:373]
CPU: 3 PID: 373 Comm: kworker/u129:2 Kdump: loaded Not tainted 6.6.0+ #10
Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.27 06/13/2017
Workqueue: writeback wb_workfn (flush-7:2)
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : native_queued_spin_lock_slowpath+0x358/0x418
lr : jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
Call trace:
native_queued_spin_lock_slowpath+0x358/0x418
jbd2_log_do_checkpoint+0x31c/0x438 [jbd2]
__jbd2_log_wait_for_space+0xfc/0x2f8 [jbd2]
add_transaction_credits+0x3bc/0x418 [jbd2]
start_this_handle+0xf8/0x560 [jbd2]
jbd2__journal_start+0x118/0x228 [jbd2]
__ext4_journal_start_sb+0x110/0x188 [ext4]
ext4_do_writepages+0x3dc/0x740 [ext4]
ext4_writepages+0xa4/0x190 [ext4]
do_writepages+0x94/0x228
__writeback_single_inode+0x48/0x318
writeback_sb_inodes+0x204/0x590
__writeback_inodes_wb+0x54/0xf8
wb_writeback+0x2cc/0x3d8
wb_do_writeback+0x2e0/0x2f8
wb_workfn+0x80/0x2a8
process_one_work+0x178/0x3e8
worker_thread+0x234/0x3b8
kthread+0xf0/0x108
ret_from_fork+0x10/0x20
So explicitly call cond_resched() in jbd2_log_do_checkpoint() to avoid
softlockup.
Cc: stable@kernel.org
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20250812063752.912130-1-libaokun@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Since commit 6b730a405037 “ext4: hoist ext4_block_write_begin and
replace the __block_write_begin”, the comment should be updated
accordingly from "__block_write_begin" to "ext4_block_write_begin".
Fixes: 6b730a405037 (“ext4: hoist ext4_block_write_begin and replace...")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20250812021709.1120716-1-liubaolin12138@163.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Neeraj Upadhyay:
"Fix a regression introduced by commit b41642c87716 ("rcu: Fix
rcu_read_unlock() deadloop due to IRQ work") which results in boot
hang as reported by kernel test bot at [1].
This issue happens because RCU re-initializes the deferred QS IRQ work
everytime it is queued. With commit b41642c87716, the IRQ work
re-initialization can happen while it is already queued. This results
in IRQ work being requeued to itself. When IRQ work finally fires, as
it is requeued to itself, it is repeatedly executed and results in
hang.
Fix this with initializing the IRQ work only once before the CPU
boots"
Link: https://lore.kernel.org/rcu/202508071303.c1134cce-lkp@intel.com/ [1]
* tag 'rcu.fixes.6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
rcu: Fix racy re-initialization of irq_work causing hangs
|
|
Commit 34331d7beed7 ("smb: client: fix first command failure during
re-negotiation") addressed a race condition by updating lstrp before
entering negotiate state. However, this approach may have some unintended
side effects.
The lstrp field is documented as "when we got last response from this
server", and updating it before actually receiving a server response
could potentially affect other mechanisms that rely on this timestamp.
For example, the SMB echo detection logic also uses lstrp as a reference
point. In scenarios with frequent user operations during reconnect states,
the repeated calls to cifs_negotiate_protocol() might continuously
update lstrp, which could interfere with the echo detection timing.
Additionally, commit 266b5d02e14f ("smb: client: fix race condition in
negotiate timeout by using more precise timing") introduced a dedicated
neg_start field specifically for tracking negotiate start time. This
provides a more precise solution for the original race condition while
preserving the intended semantics of lstrp.
Since the race condition is now properly handled by the neg_start
mechanism, the lstrp update in cifs_negotiate_protocol() is no longer
necessary and can be safely removed.
Fixes: 266b5d02e14f ("smb: client: fix race condition in negotiate timeout by using more precise timing")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
to 2.56
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We already called ib_drain_qp() before and that makes sure
send_done() was called with IB_WC_WR_FLUSH_ERR, but
didn't called atomic_dec_and_test(&sc->send_io.pending.count)
So we may never reach the info->send_pending == 0 condition.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Fixes: 5349ae5e05fa ("smb: client: let send_done() cleanup before calling smbd_disconnect_rdma_connection()")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This is step 4/4 of a patch series to fix mid_q_entry memory leaks
caused by race conditions in callback execution.
In compound_send_recv(), when wait_for_response() is interrupted by
signals, the code attempts to cancel pending requests by changing
their callbacks to cifs_cancelled_callback. However, there's a race
condition between signal interruption and network response processing
that causes both mid_q_entry and server buffer leaks:
```
User foreground process cifsd
cifs_readdir
open_cached_dir
cifs_send_recv
compound_send_recv
smb2_setup_request
smb2_mid_entry_alloc
smb2_get_mid_entry
smb2_mid_entry_alloc
mempool_alloc // alloc mid
kref_init(&temp->refcount); // refcount = 1
mid[0]->callback = cifs_compound_callback;
mid[1]->callback = cifs_compound_last_callback;
smb_send_rqst
rc = wait_for_response
wait_event_state TASK_KILLABLE
cifs_demultiplex_thread
allocate_buffers
server->bigbuf = cifs_buf_get()
standard_receive3
->find_mid()
smb2_find_mid
__smb2_find_mid
kref_get(&mid->refcount) // +1
cifs_handle_standard
handle_mid
/* bigbuf will also leak */
mid->resp_buf = server->bigbuf
server->bigbuf = NULL;
dequeue_mid
/* in for loop */
mids[0]->callback
cifs_compound_callback
/* Signal interrupts wait: rc = -ERESTARTSYS */
/* if (... || midQ[i]->mid_state == MID_RESPONSE_RECEIVED) *?
midQ[0]->callback = cifs_cancelled_callback;
cancelled_mid[i] = true;
/* The change comes too late */
mid->mid_state = MID_RESPONSE_READY
release_mid // -1
/* cancelled_mid[i] == true causes mid won't be released
in compound_send_recv cleanup */
/* cifs_cancelled_callback won't executed to release mid */
```
The root cause is that there's a race between callback assignment and
execution.
Fix this by introducing per-mid locking:
- Add spinlock_t mid_lock to struct mid_q_entry
- Add mid_execute_callback() for atomic callback execution
- Use mid_lock in cancellation paths to ensure atomicity
This ensures that either the original callback or the cancellation
callback executes atomically, preventing reference count leaks when
requests are interrupted by signals.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220404
Fixes: ee258d79159a ("CIFS: Move credit processing to mid callbacks for SMB3")
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With KASAN enabled, it is possible to get a slab out of bounds
during mount to ksmbd due to missing check in parse_server_interfaces()
(see below):
BUG: KASAN: slab-out-of-bounds in
parse_server_interfaces+0x14ee/0x1880 [cifs]
Read of size 4 at addr ffff8881433dba98 by task mount/9827
CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G
OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. Precision Tower 3620/0MWYPT,
BIOS 2.13.1 06/14/2019
Call Trace:
<TASK>
dump_stack_lvl+0x9f/0xf0
print_report+0xd1/0x670
__virt_addr_valid+0x22c/0x430
? parse_server_interfaces+0x14ee/0x1880 [cifs]
? kasan_complete_mode_report_info+0x2a/0x1f0
? parse_server_interfaces+0x14ee/0x1880 [cifs]
kasan_report+0xd6/0x110
parse_server_interfaces+0x14ee/0x1880 [cifs]
__asan_report_load_n_noabort+0x13/0x20
parse_server_interfaces+0x14ee/0x1880 [cifs]
? __pfx_parse_server_interfaces+0x10/0x10 [cifs]
? trace_hardirqs_on+0x51/0x60
SMB3_request_interfaces+0x1ad/0x3f0 [cifs]
? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs]
? SMB2_tcon+0x23c/0x15d0 [cifs]
smb3_qfs_tcon+0x173/0x2b0 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
? cifs_get_tcon+0x105d/0x2120 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_get_tcon+0x105d/0x2120 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
cifs_mount_get_tcon+0x369/0xb90 [cifs]
? dfs_cache_find+0xe7/0x150 [cifs]
dfs_mount_share+0x985/0x2970 [cifs]
? check_path.constprop.0+0x28/0x50
? save_trace+0x54/0x370
? __pfx_dfs_mount_share+0x10/0x10 [cifs]
? __lock_acquire+0xb82/0x2ba0
? __kasan_check_write+0x18/0x20
cifs_mount+0xbc/0x9e0 [cifs]
? __pfx_cifs_mount+0x10/0x10 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_setup_cifs_sb+0x29d/0x810 [cifs]
cifs_smb3_do_mount+0x263/0x1990 [cifs]
Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
On a motherboard with an AMD Granite Ridge CPU there is a report
that 3.5mm microphone and headphones aren't working. In the
log it's observed:
snd_hda_intel 0000:02:00.6: Skipping the device on the denylist
This was because of commit df42ee7e22f03 ("ALSA: hda: Add ASRock
X670E Taichi to denylist"). Reverting this commit allows the
microphone and headphones to work again. As at least some combinations
of this motherboard do have applicable devices, revert so that they
can be probed.
Cc: Richard Gong <richard.gong@amd.com>
Cc: Juan Martinez <juan.martinez@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250813140427.1577172-1-superm1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some inline functions are unused depending on kconfig, and the recent
change for clang builds made those handled as errors with W=1.
For avoiding pitfalls, mark those with __maybe_unused attributes.
Link: https://patch.msgid.link/20250813153628.12303-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Starting with Rust 1.91.0 (expected 2025-10-30), `rustdoc` has improved
some false negatives around intra-doc links [1], and it found a broken
intra-doc link we currently have:
error: unresolved link to `include/linux/device/faux.h`
--> rust/kernel/faux.rs:7:17
|
7 | //! C header: [`include/linux/device/faux.h`]
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^ no item named `include/linux/device/faux.h` in scope
|
= help: to escape `[` and `]` characters, add '\' before them like `\[` or `\]`
= note: `-D rustdoc::broken-intra-doc-links` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(rustdoc::broken_intra_doc_links)]`
Our `srctree/` C header links are not intra-doc links, thus they need
the link destination.
Thus fix it.
Cc: stable <stable@kernel.org>
Link: https://github.com/rust-lang/rust/pull/132748 [1]
Fixes: 78418f300d39 ("rust/kernel: Add faux device bindings")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250804171311.1186538-1-ojeda@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 5 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels.
10 of these fixes are for MM"
* tag 'mm-hotfixes-stable-2025-08-12-20-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: proc_maps_open allow proc_mem_open to return NULL
mm/mremap: avoid expensive folio lookup on mremap folio pte batch
userfaultfd: fix a crash in UFFDIO_MOVE when PMD is a migration entry
mm: pass page directly instead of using folio_page
selftests/proc: fix string literal warning in proc-maps-race.c
fs/proc/task_mmu: hold PTL in pagemap_hugetlb_range and gather_hugetlb_stats
mm/smaps: fix race between smaps_hugetlb_range and migration
mm: fix the race between collapse and PT_RECLAIM under per-vma lock
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()
MAINTAINERS: add Masami as a reviewer of hung task detector
mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock
kasan/test: fix protection against compiler elision
|
|
Since 'bcs->Residue' has the data type '__le32', convert it to the
correct byte order of the CPU using this driver when assigning it to
the local variable 'residue'.
Cc: stable <stable@kernel.org>
Fixes: 50a6cb932d5c ("USB: usb_storage: add ums-realtek driver")
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250813145247.184717-3-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When add workaround for ERR051725, the usbmisc will put PHY to
Non-driving mode (OPMODE = 01) after stopping the device controller
and put PHY back to Normal mode (OPMODE = 00) after starting the device
controller.
However, this will bring issue for host controller. Because the PHY may
stay in Non-driving mode after switching the role from device to host.
Then the port will not work if USB device is attached. To fix this issue,
improving the workaround by putting PHY to Non-driving mode for a certain
period and back to Normal mode finally. To make host detect a disconnect
signal, the period should be at least 125us (a micro-frame time) for
high-speed link.
And only working as high-speed mode will need workaround for ERR051725.
So this will also filter the pullup event for high-speed.
Fixes: 11992b410083 ("usb: chipidea: imx: implement workaround for ERR051725")
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250811100833.862876-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kcov_remote_start_usb_softirq() the begin of urb's completion callback.
HCDs marked HCD_BH will invoke this function from the softirq and
in_serving_softirq() will detect this properly.
Root-HUB (RH) requests will not be delayed to softirq but complete
immediately in IRQ context.
This will confuse kcov because in_serving_softirq() will report true if
the softirq is served after the hardirq and if the softirq got
interrupted by the hardirq in which currently runs.
This was addressed by simply disabling interrupts in
kcov_remote_start_usb_softirq() which avoided the interruption by the RH
while a regular completion callback was invoked.
This not only changes the behaviour while kconv is enabled but also
breaks PREEMPT_RT because now sleeping locks can no longer be acquired.
Revert the previous fix. Address the issue by invoking
kcov_remote_start_usb() only if the context is just "serving softirqs"
which is identified by checking in_serving_softirq() and in_hardirq()
must be false.
Fixes: f85d39dd7ed89 ("kcov, usb: disable interrupts in kcov_remote_start_usb_softirq")
Cc: stable <stable@kernel.org>
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: https://lore.kernel.org/all/20250725201400.1078395-2-ysk@kzalloc.com/
Tested-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250811082745.ycJqBXMs@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds the necessary PCI ID for Intel Wildcat Lake
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250812131101.2930199-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
During a device-initiated disconnect, the End Transfer command resets
the event filter, allowing a new xferNotReady event to be generated
before the controller is fully halted. Processing this late event
incorrectly triggers a Start Transfer, which prevents the controller
from halting and results in a DSTS.DEVCTLHLT bit polling timeout.
Ignore the late xferNotReady event if the controller is already in a
disconnected state.
Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250807090700.2397190-1-khtsai@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the US_FL_BULK_IGNORE_TAG quirk for Novatek NTK96550-based camera
to fix USB resets after sending SCSI vendor commands due to CBW and
CSW tags difference, leading to undesired slowness while communicating
with the device.
Please find below the copy of /sys/kernel/debug/usb/devices with my
device plugged in (listed as TechSys USB mass storage here, the
underlying chipset being the Novatek NTK96550-based camera):
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0603 ProdID=8611 Rev= 0.01
S: Manufacturer=TechSys
S: Product=USB Mass Storage
S: SerialNumber=966110000000100
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Mael GUERIN <mael.guerin@murena.io>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250806164406.43450-1-mael.guerin@murena.io
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The USB core will unmap urb->transfer_dma after SETUP stage completes.
Then the USB controller will access unmapped memory when it received
device descriptor. If iommu is equipped, the entire test can't be
completed due to the memory accessing is blocked.
Fix it by calling map_urb_for_dma() again for IN stage. To reduce
redundant map for urb->transfer_buffer, this will also set
URB_NO_TRANSFER_DMA_MAP flag before first map_urb_for_dma() to skip
dma map for urb->transfer_buffer and clear URB_NO_TRANSFER_DMA_MAP
flag before second map_urb_for_dma().
Fixes: 216e0e563d81 ("usb: core: hcd: use map_urb_for_dma for single step set feature urb")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250806083955.3325299-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Increase the External ROM access timeouts to prevent failures during
programming of External SPI EEPROM chips. The current timeouts are
too short for some SPI EEPROMs used with uPD720201 controllers.
The current timeout for Chip Erase in renesas_rom_erase() is 100 ms ,
the current timeout for Sector Erase issued by the controller before
Page Program in renesas_fw_download_image() is also 100 ms. Neither
timeout is sufficient for e.g. the Macronix MX25L5121E or MX25V5126F.
MX25L5121E reference manual [1] page 35 section "ERASE AND PROGRAMMING
PERFORMANCE" and page 23 section "Table 8. AC CHARACTERISTICS (Temperature
= 0°C to 70°C for Commercial grade, VCC = 2.7V ~ 3.6V)" row "tCE" indicate
that the maximum time required for Chip Erase opcode to complete is 2 s,
and for Sector Erase it is 300 ms .
MX25V5126F reference manual [2] page 47 section "13. ERASE AND PROGRAMMING
PERFORMANCE (2.3V - 3.6V)" and page 42 section "Table 8. AC CHARACTERISTICS
(Temperature = -40°C to 85°C for Industrial grade, VCC = 2.3V - 3.6V)" row
"tCE" indicate that the maximum time required for Chip Erase opcode to
complete is 3.2 s, and for Sector Erase it is 400 ms .
Update the timeouts such, that Chip Erase timeout is set to 5 seconds,
and Sector Erase timeout is set to 500 ms. Such lengthy timeouts ought
to be sufficient for majority of SPI EEPROM chips.
[1] https://www.macronix.com/Lists/Datasheet/Attachments/8634/MX25L5121E,%203V,%20512Kb,%20v1.3.pdf
[2] https://www.macronix.com/Lists/Datasheet/Attachments/8750/MX25V5126F,%202.5V,%20512Kb,%20v1.1.pdf
Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable <stable@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250802225526.25431-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Upon resume from system suspend, the PM runtime core issues the
following warning:
tegra-xudc 3550000.usb: Runtime PM usage count underflow!
This is because tegra_xudc_resume() unconditionally calls
schedule_work(&xudc->usb_role_sw_work) whether or not anything has
changed, which causes tegra_xudc_device_mode_off() to be called
even when we're already in that mode.
Keep track of the current state of "device_mode", and only schedule
this work if it has changed from the hardware state on resume.
Signed-off-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1uhtkH-007KDZ-JT@rmk-PC.armlinux.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Another SanDisk 3.2Gen1 Flash Drive also need DELAY_INIT quick,
or it will randomly work incorrectly on Huawei hisi platforms
when doing reboot test.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20250801082728.469406-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the name of the kcontrol from "Gain" to "Volume".
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250813100708.12197-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
After commit 0b2b066f8a85 ("io_uring/io-wq: only create a new worker
if it can make progress"), in our produce environment, we still
observe that part of io_worker threads keeps creating and destroying.
After analysis, it was confirmed that this was due to a more complex
scenario involving a large number of fsync operations, which can be
abstracted as frequent write + fsync operations on multiple files in
a single uring instance. Since write is a hash operation while fsync
is not, and fsync is likely to be suspended during execution, the
action of checking the hash value in
io_wqe_dec_running cannot handle such scenarios.
Similarly, if hash-based work and non-hash-based work are sent at the
same time, similar issues are likely to occur.
Returning to the starting point of the issue, when a new work
arrives, io_wq_enqueue may wake up free worker A, while
io_wq_dec_running may create worker B. Ultimately, only one of A and
B can obtain and process the task, leaving the other in an idle
state. In the end, the issue is caused by inconsistent logic in the
checks performed by io_wq_enqueue and io_wq_dec_running.
Therefore, the problem can be resolved by checking for available
workers in io_wq_dec_running.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Reviewed-by: Diangang Li <lidiangang@bytedance.com>
Link: https://lore.kernel.org/r/20250813120214.18729-1-changfengnan@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The NODATASUM message was printed twice by mistake and the NODATACOW was
missing from the 'unset' part. Fix the duplication and make the output
look the same.
Fixes: eddb1a433f26 ("btrfs: add reconfigure callback for fs_context")
CC: stable@vger.kernel.org # 6.8+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Kyoji Ogasawara <sawara04.o@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
