summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-09-21perf tools: Fix parallel buildEric Sandeen
Parallel builds of perf were failing for me on a 32p box, with: * new build flags or prefix util/pmu.l:7:23: error: pmu-bison.h: No such file or directory ... make: *** [util/pmu-flex.o] Error 1 make: *** Waiting for unfinished jobs.... This can pretty quickly be seen by adding a sleep in front of the bison calls in tools/perf/Makefile and running make -j4 on a smaller box i.e.: sleep 10; $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c Adding the following dependencies fixes it for me. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/505BD190.40707@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-21frontswap: support exclusive gets if tmem backend is capableDan Magenheimer
Tmem, as originally specified, assumes that "get" operations performed on persistent pools never flush the page of data out of tmem on a successful get, waiting instead for a flush operation. This is intended to mimic the model of a swap disk, where a disk read is non-destructive. Unlike a disk, however, freeing up the RAM can be valuable. Over the years that frontswap was in the review process, several reviewers (and notably Hugh Dickins in 2010) pointed out that this would result, at least temporarily, in two copies of the data in RAM: one (compressed for zcache) copy in tmem, and one copy in the swap cache. We wondered if this could be done differently, at least optionally. This patch allows tmem backends to instruct the frontswap code that this backend performs exclusive gets. Zcache2 already contains hooks to support this feature. Other backends are completely unaffected unless/until they are updated to support this feature. While it is not clear that exclusive gets are a performance win on all workloads at all times, this small patch allows for experimentation by backends. P.S. Let's not quibble about the naming of "get" vs "read" vs "load" etc. The naming is currently horribly inconsistent between cleancache and frontswap and existing tmem backends, so will need to be straightened out as a separate patch. "Get" is used by the tmem architecture spec, existing backends, and all documentation and presentation material so I am using it in this patch. Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21mm: frontswap: fix a wrong if condition in frontswap_shrinkZhenzhong Duan
pages_to_unuse is set to 0 to unuse all frontswap pages But that doesn't happen since a wrong condition in frontswap_shrink cancel it. -v2: Add comment to explain return value of __frontswap_shrink, as suggested by Dan Carpenter, thanks Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21mac80211: don't send delBA on addBA failureJohannes Berg
There's no reason to send a delBA when the peer refused our addBA, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA when removing stationsJohannes Berg
When a station is removed and we stop the aggregation sessions, it's not useful to send delBA since this is due to us or the station disassociating or dropping the connection in some other way, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21mac80211: don't send delBA before disassocJohannes Berg
When we disassociate, it's not really useful to send delBA action frames since we're going to send disassoc/deauth anyway, so change that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-21xen/gndev: Xen backend support for paged out grant targets V4.Andres Lagar-Cavilla
Since Xen-4.2, hvm domains may have portions of their memory paged out. When a foreign domain (such as dom0) attempts to map these frames, the map will initially fail. The hypervisor returns a suitable errno, and kicks an asynchronous page-in operation carried out by a helper. The foreign domain is expected to retry the mapping operation until it eventually succeeds. The foreign domain is not put to sleep because itself could be the one running the pager assist (typical scenario for dom0). This patch adds support for this mechanism for backend drivers using grant mapping and copying operations. Specifically, this covers the blkback and gntdev drivers (which map foreign grants), and the netback driver (which copies foreign grants). * Add a retry method for grants that fail with GNTST_eagain (i.e. because the target foreign frame is paged out). * Insert hooks with appropriate wrappers in the aforementioned drivers. The retry loop is only invoked if the grant operation status is GNTST_eagain. It guarantees to leave a new status code different from GNTST_eagain. Any other status code results in identical code execution as before. The retry loop performs 256 attempts with increasing time intervals through a 32 second period. It uses msleep to yield while waiting for the next retry. V2 after feedback from David Vrabel: * Explicit MAX_DELAY instead of wrap-around delay into zero * Abstract GNTST_eagain check into core grant table code for netback module. V3 after feedback from Ian Campbell: * Add placeholder in array of grant table error descriptions for unrelated error code we jump over. * Eliminate single map and retry macro in favor of a generic batch flavor. * Some renaming. * Bury most implementation in grant_table.c, cleaner interface. V4 rebased on top of sync of Xen grant table interface headers. Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org> Acked-by: Ian Campbell <ian.campbell@citrix.com> [v5: Fixed whitespace issues] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-21x86/kbuild: archscripts depends on scripts_basicJeff Mahoney
While building the SUSE kernel packages, which build the scripts, make clean, and then build everything, we have been running into spurious build failures. We tracked them down to a simple dependency issue: $ make mrproper CLEAN arch/x86/tools CLEAN scripts/basic $ cp patches/config/x86_64/desktop .config $ make archscripts HOSTCC arch/x86/tools/relocs /bin/sh: scripts/basic/fixdep: No such file or directory make[3]: *** [arch/x86/tools/relocs] Error 1 make[2]: *** [archscripts] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 This was introduced by commit 6520fe55 (x86, realmode: 16-bit real-mode code support for relocs), which added the archscripts dependency to archprepare. This patch adds the scripts_basic dependency to the x86 archscripts. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-21userns: Convert the ufs filesystem to use kuid/kgid where appropriateEric W. Biederman
Cc: Evgeniy Dushistov <dushistov@mail.ru> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert the udf filesystem to use kuid/kgid where appropriateEric W. Biederman
Cc: Jan Kara <jack@suse.cz> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21firmware: fix directory creation rule matching with make 3.80Mark Asselstine
Since make 3.80 doesn't support secondary expansion it uses a fallback rule to create firmware directories which is matched after primary expansion of the $(installed-fw) rule's prerequisite. Commit 6c7080a61fc7 [firmware: fix directory creation rule matching with make 3.82] changed the expression generated after primary expansion such that the fallback was not matched. Updating the fallback rule to match the new look primary expansion is not an option for various reasons. The trailing slash added here to $(INSTALL_FW_PATH)/. while defining installed-fw-dirs fixes builds with make 3.82 since this will provide a matching rule for $(INSTALL_FW_PATH)/$$(dir %) when % is in the base firmware directory (ie. $(dir %) gives './'). Versions of make prior to 3.82 will strip this trailing slash along with the one generated by $(dir %) when % is in the base firmware directory and as such continue to function as before. Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Tested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-21can: ti_hecc: fix oops during rmmodMarc Kleine-Budde
This patch fixes an oops which occurs when unloading the driver, while the network interface is still up. The problem is that first the io mapping is teared own, then the CAN device is unregistered, resulting in accessing the hardware's iomem: [ 172.744232] Unable to handle kernel paging request at virtual address c88b0040 [ 172.752441] pgd = c7be4000 [ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000 [ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM [ 172.767517] Modules linked in: ti_hecc(-) can_dev [ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126) [ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc] [ 172.784423] LR is at __dev_close_many+0x90/0xc0 [ 172.789123] pc : [<bf00c768>] lr : [<c033be58>] psr: 60000013 [ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000 [ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100 [ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000 [ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000 [ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015 [ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0) [ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000) [ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58 [ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44 [ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724 [ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000 [ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc [ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000 [ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c [ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4 [ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006 [ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068 [ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008 [ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000 [ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344 [ 172.954498] [<bf00c768>] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [<c033be58>] (__dev__registered_many+0xc0/0x2a0) [ 172.984161] [<c033c098>] (rollback_registered_many+0xc0/0x2a0) from [<c033c2f8>] (rollback_registered+0x20/0x30) [ 172.994750] [<c033c2f8>] (rollback_registered+0x20/0x30) from [<c033c370>] (unregister_netdevice_queue+0x68/0x98) [ 173.005401] [<c033c370>] (unregister_netdevice_queue+0x68/0x98) from [<c033c3b8>] (unregister_netdev+0x18/0x20) [ 173.015899] [<c033c3b8>] (unregister_netdev+0x18/0x20) from [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) [ 173.026245] [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [<c02842dc>] (platform_drv_remove+0x14/0x18) [ 173.036712] [<c02842dc>] (platform_drv_remove+0x14/0x18) from [<c0282f90>] (__device_release_driver+0x7c/0xbc) Cc: stable <stable@vger.kernel.org> Cc: Anant Gole <anantgole@ti.com> Tested-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21can: janz-ican3: fix support for older hardware revisionsIra W. Snyder
The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable <stable@vger.kernel.org> Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-09-21Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Essentially just flush my -fixes queue before I head off to xdc. - gen2 regression fixer, we've enabled the lvds stuff too late. Not causing any known issues, but this restores the sequence before a refactor that landed in 3.5, and lvds is a fickle beast. And seriously, who runs gen2 still ... - downgrade a BUG to a WARN - we haven't root-caused/fixed the underlying issue yet, but this should help bug reporters quite a bit. - properly disable hdmi audio - we've lost track of this, which resulted in the alsa driver again losing track of the unplug event. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: HDMI - Clear Audio Enable bit for Hot Plug drm/i915: Reduce a pin-leak BUG into a WARN drm/i915: enable lvds pin pairs before dpll on gen2
2012-09-21drm/nouveau: add dmi quirk for gpio resetDave Airlie
This fixes the gpio reset problem so the Retina MBP works, but avoids breaking the Dell systems. Ben will work on a better solution for 3.7. Tested by me on retina MBP. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-21userns: Convert ubifs to use kuid/kgidEric W. Biederman
Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert squashfs to use kuid/kgid where appropriateEric W. Biederman
Cc: Phillip Lougher <phillip@squashfs.org.uk> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert reiserfs to use kuid and kgid where appropriateEric W. Biederman
Cc: reiserfs-devel@vger.kernel.org Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert jfs to use kuid/kgid where appropriateEric W. Biederman
Cc: Dave Kleikamp <shaggy@kernel.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert jffs2 to use kuid and kgid where appropriateEric W. Biederman
- General routine uid/gid conversion work - When storing posix acls treat ACL_USER and ACL_GROUP separately so I can call from_kuid or from_kgid as appropriate. - When reading posix acls treat ACL_USER and ACL_GROUP separately so I can call make_kuid or make_kgid as appropriate. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert hpfs to use kuid and kgid where appropriateEric W. Biederman
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert btrfs to use kuid/kgid where appropriateEric W. Biederman
Cc: Chris Mason <chris.mason@fusionio.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert bfs to use kuid/kgid where appropriateEric W. Biederman
Cc: "Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert affs to use kuid/kgid wherwe appropriateEric W. Biederman
Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgidsEric W. Biederman
Silencing build errors and potentially allowing people to use osf system calls in from processes running in a non-default user namespace. It seems this stat call was missed in my first round of converting the stat system calls, bother. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-21userns: On ia64 deal with current_uid and current_gid being kuid and kgidEric W. Biederman
These ia64 uses of current_uid and current_gid slipped through the cracks when I was converting everything to kuids and kgids convert them now. Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-21userns: On ppc convert current_uid from a kuid before printing.Eric W. Biederman
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-21userns: Convert s390 getting uid and gid system calls to use kuid and kgidEric W. Biederman
Convert getresuid, getresgid, getuid, geteuid, getgid, getegid Convert struct cred kuids and kgids into userspace uids and gids when returning them. These s390 system calls slipped through the cracks in my first round of converstions :( Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert s390 hypfs to use kuid and kgid where appropriateEric W. Biederman
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-21userns: Convert binder ipc to use kuidsEric W. Biederman
Cc: Arve Hjønnevåg <arve@android.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Teach security_path_chown to take kuids and kgidsEric W. Biederman
Don't make the security modules deal with raw user space uid and gids instead pass in a kuid_t and a kgid_t so that security modules only have to deal with internal kernel uids and gids. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: James Morris <james.l.morris@oracle.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Add user namespace support to IMAEric W. Biederman
Use kuid's in the IMA rules. When reporting the current uid in audit logs use from_kuid to get a usable value. Cc: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert EVM to deal with kuids and kgids in it's hmac computationEric W. Biederman
Cc: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert hostfs to use kuid and kgid where appropriateEric W. Biederman
Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert selinux to use kuid and kgid where appropriateEric W. Biederman
Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: James Morris <james.l.morris@oracle.com> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-21userns: Convert tomoyo to use kuid and kgid where appropriateEric W. Biederman
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert apparmor to use kuid and kgid where appropriateEric W. Biederman
Cc: John Johansen <john.johansen@canonical.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert loop to use kuid_t instead of uid_tEric W. Biederman
Cc: Jens Axboe <jaxboe@fusionio.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert ipathfs to use GLOBAL_ROOT_UID and GLOBAL_ROOT_GIDEric W. Biederman
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert freevxfs to use kuid/kgid where appropriateEric W. Biederman
Cc: Christoph Hellwig <hch@infradead.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert the sysv filesystem to use kuid/kgid where appropriateEric W. Biederman
Cc: Christoph Hellwig <hch@infradead.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert the qnx6 filesystem to use kuid/kgid where appropriateEric W. Biederman
Cc: Kai Bankett <chaosman@ontika.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert the qnx4 filesystem to use kuid/kgid where appropriateEric W. Biederman
Acked-by: Anders Larsen <al@alarsen.net> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert omfs to use kuid and kgid where appropriateEric W. Biederman
Acked-by: Bob Copeland <me@bobcopeland.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert ntfs to use kuid and kgid where appropriateEric W. Biederman
Cc: Anton Altaparmakov <anton@tuxera.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert nillfs2 to use kuid/kgid where appropriateEric W. Biederman
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert minix to use kuid/kgid where appropriateEric W. Biederman
Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert logfs to use kuid/kgid where appropriateEric W. Biederman
Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert isofs to use kuid/kgid where appropriateEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-21userns: Convert hfsplus to use kuid and kgid where appropriateEric W. Biederman
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
generated by cgit (git 2.34.1) at 2025-09-24 12:50:27 +0000