summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-25cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()Wyes Karny
Driver should update policy->cur after updating the frequency. Currently amd_pstate doesn't update policy->cur when `adjust_perf` is used. Which causes /proc/cpuinfo to show wrong cpu frequency. Fix this by updating policy->cur with correct frequency value in adjust_perf function callback. - Before the fix: (setting min freq to 1.5 MHz) [root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count 1 cpu MHz : 1777.016 1 cpu MHz : 1797.160 1 cpu MHz : 1797.270 189 cpu MHz : 400.000 - After the fix: (setting min freq to 1.5 MHz) [root@amd]# cat /proc/cpuinfo | grep "cpu MHz" | sort | uniq --count 1 cpu MHz : 1753.353 1 cpu MHz : 1756.838 1 cpu MHz : 1776.466 1 cpu MHz : 1776.873 1 cpu MHz : 1777.308 1 cpu MHz : 1779.900 183 cpu MHz : 1805.231 1 cpu MHz : 1956.815 1 cpu MHz : 2246.203 1 cpu MHz : 2259.984 Fixes: 1d215f0319c2 ("cpufreq: amd-pstate: Add fast switch function for AMD P-State") Signed-off-by: Wyes Karny <wyes.karny@amd.com> [ rjw: Subject edits ] Cc: 5.17+ <stable@vger.kernel.org> # 5.17+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-05-25drm/msm/dp: add module parameter for PSRAbhinav Kumar
On sc7280 where eDP is the primary display, PSR is causing IGT breakage even for basic test cases like kms_atomic and kms_atomic_transition. Most often the issue starts with below stack so providing that as reference Call trace: dpu_encoder_assign_crtc+0x64/0x6c dpu_crtc_enable+0x188/0x204 drm_atomic_helper_commit_modeset_enables+0xc0/0x274 msm_atomic_commit_tail+0x1a8/0x68c commit_tail+0xb0/0x160 drm_atomic_helper_commit+0x11c/0x124 drm_atomic_commit+0xb0/0xdc drm_atomic_connector_commit_dpms+0xf4/0x110 drm_mode_obj_set_property_ioctl+0x16c/0x3b0 drm_connector_property_set_ioctl+0x4c/0x74 drm_ioctl_kernel+0xec/0x15c drm_ioctl+0x264/0x408 __arm64_sys_ioctl+0x9c/0xd4 invoke_syscall+0x4c/0x110 el0_svc_common+0x94/0xfc do_el0_svc+0x3c/0xb0 el0_svc+0x2c/0x7c el0t_64_sync_handler+0x48/0x114 el0t_64_sync+0x190/0x194 ---[ end trace 0000000000000000 ]--- [drm-dp] dp_ctrl_push_idle: PUSH_IDLE pattern timedout Other basic use-cases still seem to work fine hence add a a module parameter to allow toggling psr enable/disable till PSR related issues are hashed out with IGT. Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Rob Clark <robdclark@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/534420/ Link: https://lore.kernel.org/r/20230427232848.5200-1-quic_abhinavk@quicinc.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2023-05-25drm/msm: Set max segment size earlierRob Clark
Fixes the following splat on a6xx gen2+ (a640, a650, a660 families), a6xx gen1 has smaller GMU allocations so they fit under the default 64K max segment size. ------------[ cut here ]------------ DMA-API: msm_dpu ae01000.display-controller: mapping sg segment longer than device claims to support [len=126976] [max=65536] WARNING: CPU: 5 PID: 9 at kernel/dma/debug.c:1160 debug_dma_map_sg+0x288/0x314 Modules linked in: CPU: 5 PID: 9 Comm: kworker/u16:0 Not tainted 6.3.0-rc2-debug+ #629 Hardware name: Google Villager (rev1+) with LTE (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_dma_map_sg+0x288/0x314 lr : debug_dma_map_sg+0x288/0x314 sp : ffffffc00809b560 x29: ffffffc00809b560 x28: 0000000000000060 x27: 0000000000000000 x26: 0000000000010000 x25: 0000000000000004 x24: 0000000000000004 x23: ffffffffffffffff x22: ffffffdb31693cc0 x21: ffffff8080935800 x20: ffffff8087417400 x19: ffffff8087a45010 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000010000 x14: 0000000000000001 x13: ffffffffffffffff x12: ffffffffffffffff x11: 0000000000000000 x10: 000000000000000a x9 : ffffffdb2ff05e14 x8 : ffffffdb31275000 x7 : ffffffdb2ff08908 x6 : 0000000000000000 x5 : 0000000000000001 x4 : ffffffdb2ff08a74 x3 : ffffffdb31275008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff80803a9a80 Call trace: debug_dma_map_sg+0x288/0x314 __dma_map_sg_attrs+0x80/0xe4 dma_map_sgtable+0x30/0x4c get_pages+0x1d4/0x1e4 msm_gem_pin_pages_locked+0xbc/0xf8 msm_gem_pin_vma_locked+0x58/0xa0 msm_gem_get_and_pin_iova_range+0x98/0xac a6xx_gmu_memory_alloc+0x7c/0x128 a6xx_gmu_init+0x16c/0x9b0 a6xx_gpu_init+0x38c/0x3e4 adreno_bind+0x214/0x264 component_bind_all+0x128/0x1f8 msm_drm_bind+0x2b8/0x608 try_to_bring_up_aggregate_device+0x88/0x1a4 __component_add+0xec/0x13c component_add+0x1c/0x28 dp_display_probe+0x3f8/0x43c platform_probe+0x70/0xc4 really_probe+0x148/0x280 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x44/0x100 __device_attach_driver+0x64/0xdc bus_for_each_drv+0xb0/0xd8 __device_attach+0xd8/0x168 device_initial_probe+0x1c/0x28 bus_probe_device+0x44/0xb0 deferred_probe_work_func+0xc8/0xe0 process_one_work+0x2e0/0x488 process_scheduled_works+0x4c/0x50 worker_thread+0x218/0x274 kthread+0xf0/0x100 ret_from_fork+0x10/0x20 irq event stamp: 293712 hardirqs last enabled at (293711): [<ffffffdb2ff0893c>] vprintk_emit+0x160/0x25c hardirqs last disabled at (293712): [<ffffffdb30b48130>] el1_dbg+0x24/0x80 softirqs last enabled at (279520): [<ffffffdb2fe10420>] __do_softirq+0x21c/0x4bc softirqs last disabled at (279515): [<ffffffdb2fe16708>] ____do_softirq+0x18/0x24 ---[ end trace 0000000000000000 ]--- Signed-off-by: Rob Clark <robdclark@chromium.org> Fixes: db735fc4036b ("drm/msm: Set dma maximum segment size for mdss") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/534892/ Link: https://lore.kernel.org/r/20230501204441.1642741-1-robdclark@gmail.com
2023-05-25Merge tag 'for-v6.4-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: - Fix power_supply_get_battery_info for devices without parent devices resulting in NULL pointer dereference - Fix desktop systems reporting to run on battery once a power-supply device with device scope appears (e.g. a HID keyboard with a battery) - Ratelimit debug print about driver not providing data - Fix race condition related to external_power_changed in multiple drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx) - Fix LED trigger switching from blinking to solid-on when charging finishes - Fix multiple races in bq27xxx battery driver - mt6360: handle potential ENOMEM from devm_work_autocancel - sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit - rt9467: avoid passing 0 to dev_err_probe * tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits) power: supply: Fix logic checking if system is running from battery power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe power: supply: sbs-charger: Fix INHIBITED bit for Status reg power: supply: rt9467: Fix passing zero to 'dev_err_probe' power: supply: Ratelimit no data debug output power: supply: Fix power_supply_get_battery_info() if parent is NULL power: supply: bq24190: Call power_supply_changed() after updating input current power: supply: bq25890: Call power_supply_changed() after updating input current or voltage power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule() power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes power: supply: bq27xxx: Move bq27xxx_battery_update() down power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status() power: supply: bq27xxx: Fix poll_interval handling and races on remove power: supply: bq27xxx: Fix I2C IRQ race on remove power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition power: supply: leds: Fix blink to LED on transition power: supply: sc27xx: Fix external_power_changed race power: supply: bq25890: Fix external_power_changed race power: supply: axp288_fuel_gauge: Fix external_power_changed race ...
2023-05-25Merge tag 'sound-6.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes: - HD-audio runtime PM bug fix - A couple of HD-audio quirks - Fix series of ASoC Intel AVS drivers - ASoC DPCM fix for a bug found on new Intel systems - A few other ASoC device-specific small fixes" * tag 'sound-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Enable headset onLenovo M70/M90 ASoC: dwc: move DMA init to snd_soc_dai_driver probe() ASoC: cs35l41: Fix default regmap values for some registers ALSA: hda: Fix unhandled register update during auto-suspend period ASoC: dt-bindings: tlv320aic32x4: Fix supply names ASoC: Intel: avs: Add missing checks on FE startup ASoC: Intel: avs: Fix avs_path_module::instance_id size ASoC: Intel: avs: Account for UID of ACPI device ASoC: Intel: avs: Fix declaration of enum avs_channel_config ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg ASoC: Intel: avs: Access path components under lock ASoC: Intel: avs: Fix module lookup ALSA: hda/ca0132: add quirk for EVGA X299 DARK ASoC: soc-pcm: test if a BE can be prepared ASoC: rt5682: Disable jack detection interrupt during suspend ASoC: lpass: Fix for KASAN use_after_free out of bounds
2023-05-25Merge tag 'platform-drivers-x86-v6.4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "Nothing special to report just a few small fixes" * tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain platform/x86: ISST: Remove 8 socket limit platform/mellanox: mlxbf-pmc: fix sscanf() error checking platform/x86/amd/pmf: Fix CnQF and auto-mode after resume platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0
2023-05-25Merge tag 'm68k-for-v6.4-tag2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: - Fix signal frame issue causing user-space crashes on 68020/68030 * tag 'm68k-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Move signal frame following exception on 68020/030
2023-05-25io_uring: unlock sqd->lock before sq thread release CPUWenwen Chen
The sq thread actively releases CPU resources by calling the cond_resched() and schedule() interfaces when it is idle. Therefore, more resources are available for other threads to run. There exists a problem in sq thread: it does not unlock sqd->lock before releasing CPU resources every time. This makes other threads pending on sqd->lock for a long time. For example, the following interfaces all require sqd->lock: io_sq_offload_create(), io_register_iowq_max_workers() and io_ring_exit_work(). Before the sq thread releases CPU resources, unlocking sqd->lock will provide the user a better experience because it can respond quickly to user requests. Signed-off-by: Kanchan Joshi<joshi.k@samsung.com> Signed-off-by: Wenwen Chen<wenwen.chen@samsung.com> Link: https://lore.kernel.org/r/20230525082626.577862-1-wenwen.chen@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-05-25MAINTAINERS: update arm64 Microchip entriesConor Dooley
Krzysztof noticed that patches for arch/arm64/boot/dts/microchip were getting lost & the listed tree was inactive. Nicolas and I are willing to shepherd patches to Arnd, using the existing at91 tree, so add a new entry covering arch/arm64/boot/dts/microchip, listing us as maintainers. Drop the tree from the existing sparx5 entry & narrow the devicetree pattern to just sparx devices, leaving Lars, Steen and Daniel looking after support for their SoCs. CC: Rob Herring <robh+dt@kernel.org> CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> CC: Conor Dooley <conor@kernel.org> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Claudiu Beznea <claudiu.beznea@microchip.com> CC: soc@kernel.org CC: Lars Povlsen <lars.povlsen@microchip.com> CC: Steen Hegelund <Steen.Hegelund@microchip.com> CC: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20230522-wagon-stencil-a164ec39322a@wendy Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'imx-fixes-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.4: - A couple of i.MX8MN/P video clock changes from Adam Ford to fix issue with clock re-parenting. - Add missing pvcie-supply regulator for imx6qdl-mba6 board. - A series of colibri-imx8x board fixes on pin configuration. - Set and limit the mode for PMIC bucks for imx6ull-dhcor board to fix stability problems. - A couple of changes from Frank Li to correct cdns,usb3 bindings cdns,on-chip-buff-size property and fix USB 3.0 gadget failure on i.MX8QM & QXPB0. - Add a required PHY deassert delay for imx8mn-var-som board to fix PHY detection failure. * tag 'imx-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type arm64: dts: colibri-imx8x: delete adc1 and dsp arm64: dts: colibri-imx8x: fix iris pinctrl configuration arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board arm64: dts: colibri-imx8x: fix eval board pin configuration arm64: dts: imx8mp: Fix video clock parents ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3 arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay arm64: dts: imx8mn: Fix video clock parents Link: https://lore.kernel.org/r/20230516133625.GI767028@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'scmi-fix-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI fix for v6.4 Single fix for incorrect invocation of alloc_workqueue() where WQ_SYSFS flag is passed as @max_active parameter instead of OR'ing with the other flags in the @flags parameter. * tag 'scmi-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation Link: https://lore.kernel.org/r/20230509143529.1188812-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'juno-fixes-6.4' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm FVP/Vexpress fixes for v6.4 Couple of fixes to address the missing required 'cache-unified' property in the level 2 and 3 caches on some of the FVP/vexpress platforms. * tag 'juno-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: arm: add missing cache properties ARM: dts: vexpress: add missing cache properties Link: https://lore.kernel.org/r/20230509143508.1188786-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25Merge tag 'optee-async-notif-fix-for-v6.3' of ↵Arnd Bergmann
https://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes Fixes an uninitialized variable in OP-TEE driver * tag 'optee-async-notif-fix-for-v6.3' of https://git.linaro.org/people/jens.wiklander/linux-tee: optee: fix uninited async notif value Link: https://lore.kernel.org/r/20230421075443.GA3136581@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-05-25udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().Kuniyuki Iwashima
syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe13cbaa ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbaddb52d ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-05-25efi: fix missing prototype warningsArnd Bergmann
The cper.c file needs to include an extra header, and efi_zboot_entry needs an extern declaration to avoid these 'make W=1' warnings: drivers/firmware/efi/libstub/zboot.c:65:1: error: no previous prototype for 'efi_zboot_entry' [-Werror=missing-prototypes] drivers/firmware/efi/efi.c:176:16: error: no previous prototype for 'efi_attr_is_visible' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:626:6: error: no previous prototype for 'cper_estatus_print' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:649:5: error: no previous prototype for 'cper_estatus_check_header' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:662:5: error: no previous prototype for 'cper_estatus_check' [-Werror=missing-prototypes] To make this easier, move the cper specific declarations to include/linux/cper.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-05-25efi/libstub: zboot: Avoid eager evaluation of objcopy flagsArd Biesheuvel
The Make variable containing the objcopy flags may be constructed from the output of build tools operating on build artifacts, and these may not exist when doing a make clean. So avoid evaluating them eagerly, to prevent spurious build warnings. Suggested-by: Pedro Falcato <pedro.falcato@gmail.com> Tested-by: Alan Bartlett <ajb@elrepo.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2023-05-24Merge branch 'net-phy-mscc-support-vsc8501'Jakub Kicinski
David Epping says: ==================== net: phy: mscc: support VSC8501 this updated series of patches adds support for the VSC8501 Ethernet PHY and fixes support for the VSC8502 PHY in cases where no other software (like U-Boot) has initialized the PHY after power up. The first patch simply adds the VSC8502 to the MODULE_DEVICE_TABLE, where I guess it was unintentionally missing. I have no hardware to test my change. The second patch adds the VSC8501 PHY with exactly the same driver implementation as the existing VSC8502. The (new) third patch removes phydev locking from vsc85xx_rgmii_set_skews(), as discussed for v2 of the patch set. The (now) fourth patch fixes the initialization for VSC8501 and VSC8502. I have tested this patch with VSC8501 on hardware in RGMII mode only. https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8501-03_Datasheet_60001741A.PDF https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8502-03_Datasheet_60001742B.pdf Table 4-42 "RGMII CONTROL, ADDRESS 20E2 (0X14)" Bit 11 for each of them. By default the RX_CLK is disabled for these PHYs. In cases where no other software, like U-Boot, enabled the clock, this results in no received packets being handed to the MAC. The patch enables this clock output. According to Microchip support (case number 01268776) this applies to all modes (RGMII, GMII, and MII). Other PHYs sharing the same register map and code, like VSC8530/31/40/41 have the clock enabled and the relevant bit 11 is reserved and read-only for them. As per previous discussion the patch still clears the bit on these PHYs, too, possibly more easily supporting other future PHYs implementing this functionality. For the VSC8572 family of PHYs, having a different register map, no such changes are applied. ==================== Link: https://lore.kernel.org/r/20230523153108.18548-1-david.epping@missinglinkelectronics.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net: phy: mscc: enable VSC8501/2 RGMII RX clockDavid Epping
By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is disabled. To allow packet forwarding towards the MAC it needs to be enabled. For other PHYs supported by this driver the clock output is enabled by default. Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net: phy: mscc: remove unnecessary phydev lockingDavid Epping
Holding the struct phy_device (phydev) lock is unnecessary when accessing phydev->interface in the PHY driver .config_init method, which is the only place that vsc85xx_rgmii_set_skews() is called from. The phy_modify_paged() function implements required MDIO bus level locking, which can not be achieved by a phydev lock. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net: phy: mscc: add support for VSC8501David Epping
The VSC8501 PHY can use the same driver implementation as the VSC8502. Adding the PHY ID and copying the handler functions of VSC8502 is sufficient to operate it. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLEDavid Epping
The mscc driver implements support for VSC8502, so its ID should be in the MODULE_DEVICE_TABLE for automatic loading. Signed-off-by: David Epping <david.epping@missinglinkelectronics.com> Fixes: d3169863310d ("net: phy: mscc: add support for VSC8502") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24Merge branch 'bug-fixes-for-net-handshake'Jakub Kicinski
Chuck Lever says: ==================== Bug fixes for net/handshake Paolo observed that there is a possible leak of sock->file. I haven't looked into that yet, but it seems to be separate from the fixes in this series, so no need to hold these up. ==================== The submissions mentions net-next but it means netdev (perhaps merge window left over when trees are converged). In any case, it should have gone into net, but was instead applied to net-next as commit deb2e484baf9 ("Merge branch 'net-handshake-fixes'"). These are fixes tho, and Chuck needs them to make progress with the client so double-merging them into net... it is what it is :( Link: https://lore.kernel.org/r/168381978252.84244.1933636428135211300.stgit@91.116.238.104.host.secureserver.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net/handshake: Enable the SNI extension to work properlyChuck Lever
Enable the upper layer protocol to specify the SNI peername. This avoids the need for tlshd to use a DNS lookup, which can return a hostname that doesn't match the incoming certificate's SubjectName. Fixes: 2fd5532044a8 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net/handshake: Unpin sock->file if a handshake is cancelledChuck Lever
If user space never calls DONE, sock->file's reference count remains elevated. Enable sock->file to be freed eventually in this case. Reported-by: Jakub Kacinski <kuba@kernel.org> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net/handshake: handshake_genl_notify() shouldn't ignore @flagsChuck Lever
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net/handshake: Fix uninitialized local variableChuck Lever
trace_handshake_cmd_done_err() simply records the pointer in @req, so initializing it to NULL is sufficient and safe. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net/handshake: Fix handshake_dup() ref countingChuck Lever
If get_unused_fd_flags() fails, we ended up calling fput(sock->file) twice. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Suggested-by: Paolo Abeni <pabeni@redhat.com> Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24net/handshake: Remove unneeded check from handshake_dup()Chuck Lever
handshake_req_submit() now verifies that the socket has a file. Fixes: 3b3009ea8abb ("net/handshake: Create a NETLINK service for handling handshake requests") Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2023-05-24 We've added 19 non-merge commits during the last 10 day(s) which contain a total of 20 files changed, 738 insertions(+), 448 deletions(-). The main changes are: 1) Batch of BPF sockmap fixes found when running against NGINX TCP tests, from John Fastabend. 2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails, from Anton Protopopov. 3) Init the BPF offload table earlier than just late_initcall, from Jakub Kicinski. 4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields, from Will Deacon. 5) Remove a now unsupported __fallthrough in BPF samples, from Andrii Nakryiko. 6) Fix a typo in pkg-config call for building sign-file, from Jeremy Sowden. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, sockmap: Test progs verifier error with latest clang bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0 bpf, sockmap: Build helper to create connected socket pair bpf, sockmap: Pull socket helpers out of listen test for general use bpf, sockmap: Incorrectly handling copied_seq bpf, sockmap: Wake up polling after data copy bpf, sockmap: TCP data stall on recv before accept bpf, sockmap: Handle fin correctly bpf, sockmap: Improved check for empty queue bpf, sockmap: Reschedule is now done through backlog bpf, sockmap: Convert schedule_work into delayed_work bpf, sockmap: Pass skb ownership through read_skb bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields samples/bpf: Drop unnecessary fallthrough bpf: netdev: init the offload table earlier selftests/bpf: Fix pkg-config call building sign-file ==================== Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-24arm64: dts: qcom: sm8550: Use the correct LLCC register schemeKonrad Dybcio
During the ABI-breaking (for good reasons) conversion of the LLCC register description, SM8550 was not taken into account, resulting in LLCC being broken on any kernel containing the patch referenced in the fixes tag. Fix it by describing the regions properly. Fixes: ee13b5008707 ("qcom: llcc/edac: Fix the base address used for accessing LLCC banks") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230517-topic-kailua-llcc-v1-2-d57bd860c43e@linaro.org
2023-05-24dt-bindings: cache: qcom,llcc: Fix SM8550 descriptionKonrad Dybcio
SM8550 (LLCCv4.1) has 4 register regions, this was not described between its addition and the restructurization that happened in the commit referenced in the fixes tag. Fix it. Fixes: 43aa006e074c ("dt-bindings: arm: msm: Fix register regions used for LLCC banks") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230517-topic-kailua-llcc-v1-1-d57bd860c43e@linaro.org
2023-05-24arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite ↵Douglas Anderson
boards In general, the three SKUs of sc7180 (lite, normal, and pro) are handled dynamically. The cpufreq table in sc7180.dtsi includes the superset of all CPU frequencies. The "qcom-cpufreq-hw" driver in Linux shows that we can dynamically detect which frequencies are actually available on the currently running CPU and then we can just enable those ones. The GPU is similarly dynamic. The nvmem has a fuse in it (see "gpu_speed_bin" in sc7180.dtsi) that the GPU driver can use to figure out which frequencies to enable. There is one part, however, that is not so dynamic. The way SDRAM frequency works in sc7180 is that it's tied to cpufreq. At the busiest cpufreq operating points we'll pick the top supported SDRAM frequency. They ramp down together. For the "pro" SKU of sc7180, we only enable one extra cpufreq step. That extra cpufreq step runs SDRAM at the same speed as the step below. Thus, for normal and pro things are OK. There is no sc7180-pro device tree snippet. For the "lite" SKU if sc7180, however, things aren't so easy. The "lite" SKU drops 3 cpufreq entries but can still run SDRAM at max frequency. That messed things up with the whole scheme. This is why we added the "sc7180-lite" fragment in commit 8fd01e01fd6f ("arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite"). When the lite scheme came about, it was agreed that the WiFi SKUs of lazor would _always_ be "lite" and would, in fact, be the only "lite" devices. Unfortunately, this decision changed and folks didn't realize that it would be a problem. Specifically, some later lazor WiFi-only devices were built with "pro" CPUs. Building WiFi-only lazor with "pro" CPUs isn't the end of the world. The SDRAM will ramp up a little sooner than it otherwise would, but aside from a small power hit things work OK. One problem, though, is that the SDRAM scaling becomes a bit quirky. Specifically, with the current tables we'll max out SDRAM frequency at 2.1GHz but then _lower_ it at 2.2GHz / 2.3GHz only to raise it back to max for 2.4GHz and 2.55GHz. Let's at least fix this so that the SDRAM frequency doesn't go down in that quirky way. On true "lite" SKUs this change will be a no-op because the operating points we're touching are disabled. This change is only useful when a board that thinks it has a "lite" CPU actually has a "normal" or "pro" one stuffed. Fixes: 8fd01e01fd6f ("arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230515171929.1.Ic8dee2cb79ce39ffc04eab2a344dde47b2f9459f@changeid
2023-05-24Documentation: net/mlx5: Wrap notes in admonition blocksBagas Sanjaya
Wrap note paragraphs in note:: directive as it better fit for the purpose of noting devlink commands. Fixes: f2d51e579359b7 ("net/mlx5: Separate mlx5 driver documentation into multiple pages") Fixes: cf14af140a5ad0 ("net/mlx5e: Add vnic devlink health reporter to representors") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24Documentation: net/mlx5: Add blank line separator before numbered listsBagas Sanjaya
The doc forgets to add separator before numbered lists, which causes the lists to be appended to previous paragraph inline instead. Add the missing separator. Fixes: f2d51e579359b7 ("net/mlx5: Separate mlx5 driver documentation into multiple pages") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24Documentation: net/mlx5: Use bullet and definition lists for vnic counters ↵Bagas Sanjaya
description "vnic reporter" section contains unformatted description for vnic counters, which is rendered as one long paragraph instead of list. Use bullet and definition lists to match other lists. Fixes: b0bc615df488ab ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24Documentation: net/mlx5: Wrap vnic reporter devlink commands in code blocksBagas Sanjaya
Sphinx reports htmldocs warnings: Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:287: WARNING: Unexpected indentation. Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:288: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/networking/device_drivers/ethernet/mellanox/mlx5/devlink.rst:290: WARNING: Unexpected indentation. Fix above warnings by wrapping diagnostic devlink commands in "vnic reporter" section in code blocks to be consistent with other devlink command snippets. Fixes: b0bc615df488ab ("net/mlx5: Add vnic devlink health reporter to PFs/VFs") Fixes: cf14af140a5ad0 ("net/mlx5e: Add vnic devlink health reporter to representors") Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: Fix check for allocation failure in comp_irqs_request_pci()Dan Carpenter
This function accidentally dereferences "cpus" instead of returning directly. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202305200354.KV3jU94w-lkp@intel.com/ Fixes: b48a0f72bc3e ("net/mlx5: Refactor completion irq request/release code") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: DR, Add missing mutex init/destroy in pattern managerYevgeny Kliteynik
Add missing mutex init/destroy as caught by the lock's debug warning: DEBUG_LOCKS_WARN_ON(lock->magic != lock) Fixes: da5d0027d666 ("net/mlx5: DR, Add cache for modify header pattern") Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Move Ethernet driver debugfs to profile init callbackJianbo Liu
As priv->dfs_root is cleared, and therefore missed, when change eswitch mode, move the creation of the root debugfs to the init callback of mlx5e_nic_profile and mlx5e_uplink_rep_profile, and the destruction to the cleanup callback for symmeter. Fixes: 288eca60cc31 ("net/mlx5e: Add Ethernet driver debugfs") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Don't attach netdev profile while handling internal errorDmytro Linkin
As part of switchdev mode disablement, driver changes port netdevice profile from uplink to nic. If this process is triggered by health recovery flow (PCI reset, for ex.) profile attach would fail because all fw commands aborted when internal error flag is set. As a result, nic netdevice profile is not attached and driver fails to rollback to uplink profile, which leave driver in broken state and cause crash later. To handle broken state do netdevice profile initialization only instead of full attachment and release mdev resources on driver suspend as expected. Actual netdevice attachment is done during driver load. Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: Fix post parse infra to only parse every action onceVlad Buslov
Caller of mlx5e_tc_act_post_parse() needs it to parse only the subset of actions starting after previous split and ending at the current action. However, that range is not provided as arguments and mlx5e_tc_act_post_parse() uses generic flow_action_for_each() that iterates over all flow actions. Not only this is redundant, it also causes a bug when mlx5e_tc_act->post_parse() callback is not idempotent since it will be called for every split. For example, ct action tc_act_post_parse_ct() callback obtains a reference to mlx5_ct_ft instance and calling it several times during parsing stage will cause reference counter imbalance. Fix the issue by providing a proper action range of the current split subset to mlx5e_tc_act_post_parse() and only calling mlx5e_tc_act->post_parse() for actions inside the subset range. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Use query_special_contexts cmd only once per mdevDragos Tatulea
Don't query the firmware so many times (num rqs * num wqes * wqe frags) because it slows down linearly the interface creation time when the product is larger. Do it only once per mdev and store the result in mlx5e_param. Due to helper function being called from different files, move it to an appropriate location. Rename the function with a proper prefix and add a small cleanup. This fix applies only for legacy rq. Fixes: 1b1e4868836a ("net/mlx5e: Use query_special_contexts for mkeys") Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Or Har-Toov <ohartoov@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: fw_tracer, Fix event handlingShay Drory
mlx5 driver needs to parse traces with event_id inside the range of first_string_trace and num_string_trace. However, mlx5 is parsing all events with event_id >= first_string_trace. Fix it by checking for the correct range. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: SF, Drain health before removing deviceShay Drory
There is no point in recovery during device removal. Also, if health work started need to wait for it to avoid races and NULL pointer access. Hence, drain health WQ before removing device. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5: Drain health before unregistering devlinkShay Drory
mlx5 health mechanism is using devlink APIs, which are using devlink notify APIs. After the cited patch, using devlink notify APIs after devlink is unregistered triggers a WARN_ON(). Hence, drain health WQ before devlink is unregistered. Fixes: cf530217408e ("devlink: Notify users when objects are accessible") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Do not update SBCM when prio2buffer command is invalidMaher Sanalla
The shared buffer pools configuration which are stored in the SBCM register are updated when the user changes the prio2buffer mapping. However, in case the user desired prio2buffer change is invalid, which can occur due to mapping a lossless priority to a not large enough buffer, the SBCM update should not be performed, as the user command is failed. Thus, Perform the SBCM update only after xoff threshold calculation is performed and the user prio2buffer mapping is validated. Fixes: a440030d8946 ("net/mlx5e: Update shared buffer along with device buffer changes") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Consider internal buffers size in port buffer calculationsMaher Sanalla
Currently, when a user triggers a change in port buffer headroom (buffers 0-7), the driver checks that the requested headroom does not exceed the total port buffer size. However, this check does not take into account the internal buffers (buffers 8-9), which are also part of the total port buffer. This can result in treating invalid port buffer change requests as valid, causing unintended changes to the shared buffer. To address this, include the internal buffers size in the calculation of available port buffer space which ensures that port buffer requests do not exceed the correct limit. Furthermore, remove internal buffers (8-9) size from the total_size calculation as these buffers are reserved for internal use and are not exposed to the user. While at it, add verbosity to the debug prints in mlx5e_port_query_buffer() function to ease future debugging. Fixes: ecdf2dadee8e ("net/mlx5e: Receive buffer support for DCBX") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Prevent encap offload when neigh update is runningChris Mi
The cited commit adds a compeletion to remove dependency on rtnl lock. But it causes a deadlock for multiple encapsulations: crash> bt ffff8aece8a64000 PID: 1514557 TASK: ffff8aece8a64000 CPU: 3 COMMAND: "tc" #0 [ffffa6d14183f368] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14183f3f8] schedule at ffffffffb8ba8418 #2 [ffffa6d14183f418] schedule_preempt_disabled at ffffffffb8ba8898 #3 [ffffa6d14183f428] __mutex_lock at ffffffffb8baa7f8 #4 [ffffa6d14183f4d0] mutex_lock_nested at ffffffffb8baabeb #5 [ffffa6d14183f4e0] mlx5e_attach_encap at ffffffffc0f48c17 [mlx5_core] #6 [ffffa6d14183f628] mlx5e_tc_add_fdb_flow at ffffffffc0f39680 [mlx5_core] #7 [ffffa6d14183f688] __mlx5e_add_fdb_flow at ffffffffc0f3b636 [mlx5_core] #8 [ffffa6d14183f6f0] mlx5e_tc_add_flow at ffffffffc0f3bcdf [mlx5_core] #9 [ffffa6d14183f728] mlx5e_configure_flower at ffffffffc0f3c1d1 [mlx5_core] #10 [ffffa6d14183f790] mlx5e_rep_setup_tc_cls_flower at ffffffffc0f3d529 [mlx5_core] #11 [ffffa6d14183f7a0] mlx5e_rep_setup_tc_cb at ffffffffc0f3d714 [mlx5_core] #12 [ffffa6d14183f7b0] tc_setup_cb_add at ffffffffb8931bb8 #13 [ffffa6d14183f810] fl_hw_replace_filter at ffffffffc0dae901 [cls_flower] #14 [ffffa6d14183f8d8] fl_change at ffffffffc0db5c57 [cls_flower] #15 [ffffa6d14183f970] tc_new_tfilter at ffffffffb8936047 #16 [ffffa6d14183fac8] rtnetlink_rcv_msg at ffffffffb88c7c31 #17 [ffffa6d14183fb50] netlink_rcv_skb at ffffffffb8942853 #18 [ffffa6d14183fbc0] rtnetlink_rcv at ffffffffb88c1835 #19 [ffffa6d14183fbd0] netlink_unicast at ffffffffb8941f27 #20 [ffffa6d14183fc18] netlink_sendmsg at ffffffffb8942245 #21 [ffffa6d14183fc98] sock_sendmsg at ffffffffb887d482 #22 [ffffa6d14183fcb8] ____sys_sendmsg at ffffffffb887d81a #23 [ffffa6d14183fd38] ___sys_sendmsg at ffffffffb88806e2 #24 [ffffa6d14183fe90] __sys_sendmsg at ffffffffb88807a2 #25 [ffffa6d14183ff28] __x64_sys_sendmsg at ffffffffb888080f #26 [ffffa6d14183ff38] do_syscall_64 at ffffffffb8b9b6a8 #27 [ffffa6d14183ff50] entry_SYSCALL_64_after_hwframe at ffffffffb8c0007c crash> bt 0xffff8aeb07544000 PID: 1110766 TASK: ffff8aeb07544000 CPU: 0 COMMAND: "kworker/u20:9" #0 [ffffa6d14e6b7bd8] __schedule at ffffffffb8ba7f45 #1 [ffffa6d14e6b7c68] schedule at ffffffffb8ba8418 #2 [ffffa6d14e6b7c88] schedule_timeout at ffffffffb8baef88 #3 [ffffa6d14e6b7d10] wait_for_completion at ffffffffb8ba968b #4 [ffffa6d14e6b7d60] mlx5e_take_all_encap_flows at ffffffffc0f47ec4 [mlx5_core] #5 [ffffa6d14e6b7da0] mlx5e_rep_update_flows at ffffffffc0f3e734 [mlx5_core] #6 [ffffa6d14e6b7df8] mlx5e_rep_neigh_update at ffffffffc0f400bb [mlx5_core] #7 [ffffa6d14e6b7e50] process_one_work at ffffffffb80acc9c #8 [ffffa6d14e6b7ed0] worker_thread at ffffffffb80ad012 #9 [ffffa6d14e6b7f10] kthread at ffffffffb80b615d #10 [ffffa6d14e6b7f50] ret_from_fork at ffffffffb8001b2f After the first encap is attached, flow will be added to encap entry's flows list. If neigh update is running at this time, the following encaps of the flow can't hold the encap_tbl_lock and sleep. If neigh update thread is waiting for that flow's init_done, deadlock happens. Fix it by holding lock outside of the for loop. If neigh update is running, prevent encap flows from offloading. Since the lock is held outside of the for loop, concurrent creation of encap entries is not allowed. So remove unnecessary wait_for_completion call for res_ready. Fixes: 95435ad7999b ("net/mlx5e: Only access fully initialized flows in neigh update") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24net/mlx5e: Extract remaining tunnel encap code to dedicated fileChris Mi
Move set_encap_dests() and clean_encap_dests() to the tunnel encap dedicated file. And rename them to mlx5e_tc_tun_encap_dests_set() and mlx5e_tc_tun_encap_dests_unset(). No functional change in this patch. It is needed in the next patch. Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2023-05-24arm64: dts: qcom: sm8550: use uint16 for Soundwire intervalKrzysztof Kozlowski
The Soundwire bindings changed during review, after the SM8550 DTS Soundwire nodes were merged. Switch to uint16 for Soundwire qcom,ports-sinterval property, to match with current bindings. Fixes: 61b006389bb7 ("arm64: dts: qcom: sm8550: add Soundwire controllers") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230418095734.669858-1-krzysztof.kozlowski@linaro.org
generated by cgit (git 2.34.1) at 2025-09-12 06:09:46 +0000