| Age | Commit message (Collapse) | Author |
|---|
|
If enabled, we fallback to the platform keyring if the trusted keyring
doesn't have the key used to sign the ipe policy. But if pkcs7_verify()
rejects the key for other reasons, such as usage restrictions, we do not
fallback. Do so, following the same change in dm-verity.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Suggested-by: Serge Hallyn <serge@hallyn.com>
[FW: fixed some line length issues and a typo in the commit message]
Signed-off-by: Fan Wu <wufan@kernel.org>
|
|
Pull smb client fixes from Steve French:
- Fix possible double free setting xattrs
- Fix slab out of bounds with large ioctl payload
- Remove three unused functions, and an unused variable that could be
confusing
* tag 'v6.12-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Remove unused functions
smb/client: Fix logically dead code
smb: client: fix OOBs when building SMB2_IOCTL request
smb: client: fix possible double free in smb2_set_ea()
|
|
Pull xfs fixes from Carlos Maiolino:
- Fix integer overflow in xrep_bmap
- Fix stale dealloc punching for COW IO
* tag 'xfs-6.12-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: punch delalloc extents from the COW fork for COW writes
xfs: set IOMAP_F_SHARED for all COW fork allocations
xfs: share more code in xfs_buffered_write_iomap_begin
xfs: support the COW fork in xfs_bmap_punch_delalloc_range
xfs: IOMAP_ZERO and IOMAP_UNSHARE already hold invalidate_lock
xfs: take XFS_MMAPLOCK_EXCL xfs_file_write_zero_eof
xfs: factor out a xfs_file_write_zero_eof helper
iomap: move locking out of iomap_write_delalloc_release
iomap: remove iomap_file_buffered_write_punch_delalloc
iomap: factor out a iomap_last_written_block helper
xfs: fix integer overflow in xrep_bmap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two issues in the amd-pstate cpufreq driver and update the
intel_rapl power capping driver with a new processor ID.
Specifics:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling it
in amd_pstate_unregister_driver() when switching driver operation
modes (Dhananjay Ugwekar)
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello)
- Add ArrowLake-H to the list of processors where PL4 is supported in
the MSR part of the intel_rapl power capping driver (Srinivas
Pandruvada)"
* tag 'pm-6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: intel_rapl_msr: Add PL4 support for ArrowLake-H
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix auto-detect regression in jc42 driver"
* tag 'hwmon-for-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
[PATCH} hwmon: (jc42) Properly detect TSE2004-compliant devices again
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, msm and xe are the two main ones, with a bunch of
scattered fixes including a largish revert in mgag200, then amdgpu,
vmwgfx and scattering of other minor ones.
All seems pretty regular.
msm:
- Display:
- move CRTC resource assignment to atomic_check otherwise to make
consecutive calls to atomic_check() consistent
- fix rounding / sign-extension issues with pclk calculation in
case of DSC
- cleanups to drop incorrect null checks in dpu snapshots
- fix to use kvzalloc in dpu snapshot to avoid allocation issues
in heavily loaded system cases
- Fix to not program merge_3d block if dual LM is not being used
- Fix to not flush merge_3d block if its not enabled otherwise
this leads to false timeouts
- GPU:
- a7xx: add a fence wait before SMMU table update
xe:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew
Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
amdgpu:
- SR-IOV fix
- CS chunk handling fix
- MES fixes
- SMU13 fixes
amdkfd:
- VRAM usage reporting fix
radeon:
- Fix possible_clones handling
i915:
- Two DP bandwidth related MST fixes
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()"
* tag 'drm-fixes-2024-10-18' of https://gitlab.freedesktop.org/drm/kernel: (45 commits)
drm/ast: vga: Clear EDID if no display is connected
drm/ast: sil164: Clear EDID if no display is connected
Revert "drm/mgag200: Add vblank support"
drm/amdgpu/swsmu: default to fullscreen 3D profile for dGPUs
drm/i915/display: Don't allow tile4 framebuffer to do hflip on display20 or greater
drm/xe/bmg: improve cache flushing behaviour
drm/xe/xe_sync: initialise ufence.signalled
drm/xe/ufence: ufence can be signaled right after wait_woken
drm/xe: Use bookkeep slots for external BO's in exec IOCTL
drm/xe/query: Increase timestamp width
drm/xe: Don't free job in TDR
drm/xe: Take job list lock in xe_sched_add_pending_job
drm/xe: fix unbalanced rpm put() with declare_wedged()
drm/xe: fix unbalanced rpm put() with fence_fini()
drm/xe/xe2lpg: Extend Wa_15016589081 for xe2lpg
drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible mode
drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
drm/msm/a6xx+: Insert a fence wait before SMMU table update
drm/msm/dpu: don't always program merge_3d block
drm/msm/dpu: Don't always set merge_3d pending flush
...
|
|
On i.MX8MM the register of volume control has positive and negative
values. It is different from other platforms like i.MX8MP and i.MX93
which only have positive values. Add a volume_sx flag to use SX_TLV
volume control for this kind of platform. Use common TLV volume control
for other platforms.
Fixes: cdfa92eb90f5 ("ASoC: fsl_micfil: Correct the number of steps on SX controls")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20241017071507.2577786-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Turns out some registers of pre-2.5 version of rxmacro codecs are not
located at the expected offsets but 0xc further away in memory. So far
the detected registers are CDC_RX_RX2_RX_PATH_SEC7 and
CDC_RX_RX2_RX_PATH_DSM_CTL.
CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n) macro incorrectly generates the address
0x540 for RX2 but it should be 0x54C and it also overwrites
CDC_RX_RX2_RX_PATH_SEC7 which is located at 0x540.
The same goes for CDC_RX_RXn_RX_PATH_SEC7(rx, n).
Fix this by introducing additional rxn_reg_stride2 offset. For 2.5 version
and above this offset will be equal to 0.
With such change the corresponding RXn() macros will generate the same
values for 2.5 codec version for all RX paths and the same old values
for pre-2.5 version for RX0 and RX1. However for the latter case with
RX2 path it will also add rxn_reg_stride2 on top.
While at this, also remove specific if-check for INTERP_AUX from
rx_macro_digital_mute() and rx_macro_enable_interp_clk(). These if-check
was used to handle such special offset for AUX interpolator but since
CDC_RX_RXn_RX_PATH_SEC7(rx, n) and CDC_RX_RXn_RX_PATH_DSM_CTL(rx, n)
macros will generate the correst addresses of dsm register, they are no
longer needed.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20241016221049.1145101-1-alexey.klimov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.12
Pull MD fixes from Song.
* tag 'md-6.12-20241018' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
|
|
The lockdep asserts for the new follow_pfnmap() API "knows" that a
pfnmap always has a vma->vm_file, since that's the only way to create
such a mapping.
And that's actually true for all the normal cases. But not for the mmap
failure case, where the incomplete mapping is torn down and we have
cleared vma->vm_file because the failure occured before the file was
linked to the vma.
So this codepath does actually need to check for vm_file being NULL.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 6da8e9634bb7 ("mm: new follow_pfnmap API")
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge amd-pstate driver fixes for 6.12-rc4:
- Enable ACPI CPPC in amd_pstate_register_driver() after disabling
it in amd_pstate_unregister_driver() during driver operation mode
switch (Dhananjay Ugwekar).
- Make amd-pstate use nominal performance as the maximum performance
level when boost is disabled (Mario Limonciello).
* pm-cpufreq:
cpufreq/amd-pstate: Use nominal perf for limits when boost is disabled
cpufreq/amd-pstate: Fix amd_pstate mode switch on shared memory systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
"ARM-SMMU fixes from Will Deacon:
- Clarify warning message when failing to disable the MMU-500
prefetcher
- Fix undefined behaviour in calculation of L1 stream-table index
when 32-bit StreamIDs are implemented
- Replace a rogue comma with a semicolon
Intel VT-d fix from Lu Baolu:
- Fix incorrect pci_for_each_dma_alias() for non-PCI devices"
* tag 'iommu-fixes-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/vt-d: Fix incorrect pci_for_each_dma_alias() for non-PCI devices
iommu/arm-smmu-v3: Convert comma to semicolon
iommu/arm-smmu-v3: Fix last_sid_idx calculation for sid_bits==32
iommu/arm-smmu: Clarify MMU-500 CPRE workaround
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Madhavan Srinivasan:
- To prevent possible memory leak, free "name" on error in
opal_event_init()
Thanks to Michael Ellerman and 2639161967.
* tag 'powerpc-6.12-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Free name on error in opal_event_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Fix PCI error recovery by handling error events correctly
- Fix CCA crypto card behavior within protected execution environment
- Two KVM commits which fix virtual vs physical address handling bugs
in KVM pfault handling
- Fix return code handling in pckmo_key2protkey()
- Deactivate sclp console as late as possible so that outstanding
messages appear on the console instead of being dropped on reboot
- Convert newlines to CRLF instead of LFCR for the sclp vt220 driver,
as required by the vt220 specification
- Initialize also psw mask in perf_arch_fetch_caller_regs() to make
sure that user_mode(regs) will return false
- Update defconfigs
* tag 's390-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: Update defconfigs
s390: Initialize psw mask in perf_arch_fetch_caller_regs()
s390/sclp_vt220: Convert newlines to CRLF instead of LFCR
s390/sclp: Deactivate sclp after all its users
s390/pkey_pckmo: Return with success for valid protected key types
KVM: s390: Change virtual to physical address access in diag 0x258 handler
KVM: s390: gaccess: Check if guest address is in memslot
s390/ap: Fix CCA crypto card behavior within protected execution environment
s390/pci: Handle PCI error codes other than 0x3a
|
|
rts5228, rts5261, rts5264 are supported by the rtsx_pci driver, but
they are not mentioned in the Kconfig help when the code was added.
List those models in the Kconfig help accordingly.
Signed-off-by: Yo-Jung Lin (Leo) <0xff07@gmail.com>
Link: https://lore.kernel.org/r/20241017144747.15966-1-0xff07@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove some entries due to various compliance requirements. They can come
back in the future if sufficient documentation is provided.
Link: https://lore.kernel.org/r/2024101835-tiptop-blip-09ed@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building the kernel with W=1 generates the following warning:
fs/proc/fd.c:81: warning: This comment starts with '/**',
but isn't a kernel-doc comment.
Use a normal comment for the helper function proc_fdinfo_permission().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20241018102705.92237-2-thorsten.blum@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The Thinkpad X1 Tablet Gen 3 keyboard has the same Lenovo specific quirks
as the original Thinkpad X1 Tablet keyboard.
Add the PID for the "Thinkpad X1 Tablet Gen 3 keyboard" to the hid-lenovo
driver to fix the FnLock, Mute and media buttons not working.
Suggested-by: Izhar Firdaus <izhar@fedoraproject.org>
Closes https://bugzilla.redhat.com/show_bug.cgi?id=2315395
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Patch for Goodix 27c6:0d42 touchpads found in Inspiron 5515 laptops.
After resume from suspend, one can communicate with this device just fine.
We can read data from it or request a reset,
but for some reason the interrupt line will not go up
when new events are available.
(it can correctly respond to a reset with an interrupt tho)
The only way I found to wake this device up
is to send anything to it after ~1.5s mark,
for example a simple read request, or power mode change.
In this patch, I simply delay the resume steps with msleep,
this will cause the set_power request to happen after
the ~1.5s barrier causing the device to resume its event interrupts.
Sleep was used rather than delayed_work
to make this workaround as non-invasive as possible.
[jkosina@suse.com: shortlog update]
Signed-off-by: Bartłomiej Maryńczak <marynczakbartlomiej@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device ids for 6.12-rc4
Here are some new modem device ids.
Everything has been in linux-next over night with no reported issues.
* tag 'usb-serial-6.12-rc4' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN920C04 MBIM compositions
USB: serial: option: add support for Quectel EG916Q-GL
|
|
Commit 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
adds a weak reverse dependency to the config XEN_PRIVCMD definition, that
dependency causes xen-privcmd can't be loaded on domU, because dependent
xen-pciback isn't always be loaded successfully on domU.
To solve above problem, remove that dependency, and do not call
pcistub_get_gsi_from_sbdf() directly, instead add a hook in
drivers/xen/apci.c, xen-pciback register the real call function, then in
privcmd_ioctl_pcidev_get_gsi call that hook.
Fixes: 2fae6bb7be32 ("xen/privcmd: Add new syscall to get gsi from dev")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241012084537.1543059-1-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
hash_check_key() checks and repairs the hash table btrees: dirents and
xattrs are open addressing hash tables.
We recently had a corruption reported where the hash type on an inode
somehow got flipped, which made the existing dirents invisible and
allowed new ones to be created with the same name.
Now, hash_check_key() can repair duplicates: it will delete one of them,
if it has an xattr or dangling dirent, but if it has two valid dirents
one of them gets renamed.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a variant of bch2_hash_set_in_snapshot() that returns the existing
key on -EEXIST.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Different versions of the same inode (same inode number, different
snapshot ID) must have the same hash seed and type - lookups require
this, since they see keys from different snapshots simultaneously.
To repair we only need to make the inodes consistent, hash_check_key()
will do the rest.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This helped with discovering some filesystem corruption fsck has having
trouble with: the str_hash type had gotten flipped on one snapshot's
version of an inode.
All versions of a given inode number have the same hash seed and hash
type, since lookups will be done with a single hash/seed and type and
see dirents/xattrs from multiple snapshots.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Trivial cleanup - add a normal BITMASK() helper for bch_inode_unpacked.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The options parse in get_tree will split the options buffer, it will
get the empty string for last one by strsep(). After commit
ea0eeb89b1d5 ("bcachefs: reject unknown mount options") is merged,
unknown mount options is not allowed (here is empty string), and this
causes this errors. This can be reproduced just by the following steps:
bcachefs format /dev/loop
mount -t bcachefs -o metadata_target=loop1 /dev/loop1 /mnt/bcachefs/
Fixes: ea0eeb89b1d5 ("bcachefs: reject unknown mount options")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
When call show_options in bcachefs, the options buffer is appeneded
to the seq variable. In fact, it requires an additional comma to be
appended first. This will affect the remount process when reading
existing mount options.
Fixes: 9305cf91d05e ("bcachefs: bch2_opts_to_text()")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Found by generic/299: When we have to truncate a write due to -ENOSPC,
we may have to read in the folio we're writing to if we're now no longer
doing a complete write to a !uptodate folio.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_folio_reservation_get_partial(), on partial success, will now
return a reservation that's aligned to the filesystem blocksize.
This is a partial fix for fstests generic/299 - fio verify is badly
behaved in the presence of short writes that aren't aligned to its
blocksize.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_disk_reservation_put() zeroes out the reservation - oops.
This fixes a disk reservation leak when getting a quota reservation
returned an error.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Using commit_do() to call alloc_sectors_start_trans() breaks when we're
randomly injecting transaction restarts - the restart in the commit
causes us to leak the lock that alloc_sectorS_start_trans() takes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bch2_bucket_io_time_reset() doesn't need to succeed, which is why it
didn't previously retry on transaction restart - but we're now treating
these as errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This is ugly:
We may discover in alloc_write_key that the data type we calculated is
wrong, because BCH_DATA_need_discard is checked/set elsewhere, and the
disk accounting counters we calculated need to be updated.
But bch2_alloc_key_to_dev_counters(..., BTREE_TRIGGER_gc) is not safe
w.r.t. transaction restarts, so we need to propagate the fixup back to
our gc state in case we take a transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
this one is fairly harmless since the invalidate worker will just run
again later if it needs to, but still worth fixing
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We were leaking transaction restart errors to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
we were exiting an iterator that hadn't been initialized
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This should be impossible to hit in practice; the first lookup within a
transaction won't return a restart due to lock ordering, but we're
adding fault injection for transaction restarts and shaking out bugs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- New workaround to Xe2 (Aradhya)
- Fix unbalanced rpm put (Matthew Auld)
- Remove fragile lock optimization (Matthew Brost)
- Fix job release, delegating it to the drm scheduler (Matthew Brost)
- Fix timestamp bit width for Xe2 (Lucas)
- Fix external BO's dma-resv usag (Matthew Brost)
- Fix returning success for timeout in wait_token (Nirmoy)
- Initialize fence to avoid it being detected as signaled (Matthew Auld)
- Improve cache flush for BMG (Matthew Auld)
- Don't allow hflip for tile4 framebuffer on Xe2 (Juha-Pekka)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/jkldrex5733ldxrla75b4ayvhujjhw2kccmasl5rotoufoacj4@pkvlrrv4orc7
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 IBPB fixes from Borislav Petkov:
"This fixes the IBPB implementation of older AMDs (< gen4) that do not
flush the RSB (Return Address Stack) so you can still do some leaking
when using a "=ibpb" mitigation for Retbleed or SRSO. Fix it by doing
the flushing in software on those generations.
IBPB is not the default setting so this is not likely to affect
anybody in practice"
* tag 'x86_bugs_post_ibpb' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Do not use UNTRAIN_RET with IBPB on entry
x86/bugs: Skip RSB fill at VMEXIT
x86/entry: Have entry_ibpb() invalidate return predictions
x86/cpufeatures: Add a IBPB_NO_RET BUG flag
x86/cpufeatures: Define X86_FEATURE_AMD_IBPB_RET
|
|
The barrier_nospec() after the array bounds check is overkill and
painfully slow for arches which implement it.
Furthermore, most arches don't implement it, so they remain exposed to
Spectre v1 (which can affect pretty much any CPU with branch
prediction).
Instead, clamp the user pointer to a valid range so it's guaranteed to
be a valid array index even when the bounds check mispredicts.
Fixes: 8270cb10c068 ("cdrom: Fix spectre-v1 gadget")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1d86f4d9d8fba68e5ca64cdeac2451b95a8bf872.1729202937.git.jpoimboe@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"28 hotfixes. 13 are cc:stable. 23 are MM.
It is the usual shower of unrelated singletons - please see the
individual changelogs for details"
* tag 'mm-hotfixes-stable-2024-10-17-16-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (28 commits)
maple_tree: add regression test for spanning store bug
maple_tree: correct tree corruption on spanning store
mm/mglru: only clear kswapd_failures if reclaimable
mm/swapfile: skip HugeTLB pages for unuse_vma
selftests: mm: fix the incorrect usage() info of khugepaged
MAINTAINERS: add Jann as memory mapping/VMA reviewer
mm: swap: prevent possible data-race in __try_to_reclaim_swap
mm: khugepaged: fix the incorrect statistics when collapsing large file folios
MAINTAINERS: kasan, kcov: add bugzilla links
mm: don't install PMD mappings when THPs are disabled by the hw/process/vma
mm: huge_memory: add vma_thp_disabled() and thp_disabled_by_hw()
Docs/damon/maintainer-profile: update deprecated awslabs GitHub URLs
Docs/damon/maintainer-profile: add missing '_' suffixes for external web links
maple_tree: check for MA_STATE_BULK on setting wr_rebalance
mm: khugepaged: fix the arguments order in khugepaged_collapse_file trace point
mm/damon/tests/sysfs-kunit.h: fix memory leak in damon_sysfs_test_add_targets()
mm: remove unused stub for can_swapin_thp()
mailmap: add an entry for Andy Chiu
MAINTAINERS: add memory mapping/VMA co-maintainers
fs/proc: fix build with GCC 15 due to -Werror=unterminated-string-initialization
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Two clk driver fixes and a unit test fix:
- Terminate the of_device_id table in the Samsung exynosautov920 clk
driver so that device matching logic doesn't run off the end of the
array into other memory and break matching for any kernel with this
driver loaded
- Properly limit the max clk ID in the Rockchip clk driver
- Use clk kunit helpers in the clk tests so that memory isn't leaked
after the test concludes"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: test: Fix some memory leaks
clk: rockchip: fix finding of maximum clock ID
clk: samsung: Fix out-of-bound access of of_match_node()
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
ast:
- Clear EDID on unplugged connectors
host1x:
- Fix boot on Tegra186
- Set DMA parameters
mgag200:
- Revert VBLANK support
panel:
- himax-hx83192: Adjust power and gamma
qaic:
- Sgtable loop fixes
vmwgfx:
- Limit display layout allocatino size
- Handle allocation errors in connector checks
- Clean up KMS code for 2d-only setup
- Report surface-check errors correctly
- Remove NULL test around kvfree()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017115516.GA196624@linux.fritz.box
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Two DP bandwidth related MST fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZxDLdML9Dwqkb1AW@jlahtine-mobl.ger.corp.intel.com
|
