summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-21net/mlx5e: Fix multicast counter not up-to-date in "ip -s"Ron Diskin
Currently the FW does not generate events for counters other than error counters. Unlike ".get_ethtool_stats", ".ndo_get_stats64" (which ip -s uses) might run in atomic context, while the FW interface is non atomic. Thus, 'ip' is not allowed to issue FW commands, so it will only display cached counters in the driver. Add a SW counter (mcast_packets) in the driver to count rx multicast packets. The counter also counts broadcast packets, as we consider it a special case of multicast. Use the counter value when calling "ip -s"/"ifconfig". Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Fix endianness when calculating pedit mask first bitMaor Dickman
The field mask value is provided in network byte order and has to be converted to host byte order before calculating pedit mask first bit. Fixes: 88f30bbcbaaa ("net/mlx5e: Bit sized fields rewrite support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-21net/mlx5e: Enable adding peer miss rules only if merged eswitch is supportedMaor Dickman
The cited commit creates peer miss group during switchdev mode initialization in order to handle miss packets correctly while in VF LAG mode. This is done regardless of FW support of such groups which could cause rules setups failure later on. Fix by adding FW capability check before creating peer groups/rule. Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: CT: Fix freeing ct_label mappingRoi Dayan
Add missing mapping remove call when removing ct rule, as the mapping was allocated when ct rule was adding with ct_label. Also there is a missing mapping remove call in error flow. Fixes: 54b154ecfb8c ("net/mlx5e: CT: Map 128 bits labels to 32 bit map ID") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Fix memory leak of tunnel info when rule under multipath not readyJianbo Liu
When deleting vxlan flow rule under multipath, tun_info in parse_attr is not freed when the rule is not ready. Fixes: ef06c9ee8933 ("net/mlx5e: Allow one failure when offloading tc encap rules under multipath") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Use synchronize_rcu to sync with NAPIMaxim Mikityanskiy
As described in the previous commit, napi_synchronize doesn't quite fit the purpose when we just need to wait until the currently running NAPI quits. Its implementation waits until NAPI is not running by polling and waiting for 1ms in between. In cases where we need to deactivate one queue (e.g., recovery flows) or where we deactivate them one-by-one (deactivate channel flow), we may get stuck in napi_synchronize forever if other queues keep NAPI active, causing a soft lockup. Depending on kernel configuration (CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC), it may result in a kernel panic. To fix the issue, use synchronize_rcu to wait for NAPI to quit, and wrap the whole NAPI in rcu_read_lock. Fixes: acc6c5953af1 ("net/mlx5e: Split open/close channels to stages") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Use RCU to protect rq->xdp_progMaxim Mikityanskiy
Currently, the RQs are temporarily deactivated while hot-replacing the XDP program, and napi_synchronize is used to make sure rq->xdp_prog is not in use. However, napi_synchronize is not ideal: instead of waiting till the end of a NAPI cycle, it polls and waits until NAPI is not running, sleeping for 1ms between the periodic checks. Under heavy workloads, this loop will never end, which may even lead to a kernel panic if the kernel detects the hangup. Such workloads include XSK TX and possibly also heavy RX (XSK or normal). The fix is inspired by commit 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"). As mlx5e_xdp_handle is already protected by rcu_read_lock, and bpf_prog_put uses call_rcu to free the program, there is no need for additional synchronization if proper RCU functions are used to access the pointer. This patch converts all accesses to rq->xdp_prog to use RCU functions. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5: Fix FTE cleanupMaor Gottlieb
Currently, when an FTE is allocated, its refcount is decreased to 0 with the purpose it will not be a stand alone steering object and every rule (destination) of the FTE would increase the refcount. When mlx5_cleanup_fs is called while not all rules were deleted by the steering users, it hit refcount underflow on the FTE once clean_tree calls to tree_remove_node after the deleted rules already decreased the refcount to 0. FTE is no longer destroyed implicitly when the last rule (destination) is deleted. mlx5_del_flow_rules avoids it by increasing the refcount on the FTE and destroy it explicitly after all rules were deleted. So we can avoid the refcount underflow by making FTE as stand alone object. In addition need to set del_hw_func to FTE so the HW object will be destroyed when the FTE is deleted from the cleanup_tree flow. refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 15715 at lib/refcount.c:28 refcount_warn_saturate+0xd9/0xe0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: tree_put_node+0xf2/0x140 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x5f/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x5f/0xf0 [mlx5_core] mlx5_cleanup_fs+0x26/0x270 [mlx5_core] mlx5_unload+0x2e/0xa0 [mlx5_core] mlx5_unload_one+0x51/0x120 [mlx5_core] mlx5_devlink_reload_down+0x51/0x90 [mlx5_core] devlink_reload+0x39/0x120 ? devlink_nl_cmd_reload+0x43/0x220 genl_rcv_msg+0x1e4/0x420 ? genl_family_rcv_msg_attrs_parse+0x100/0x100 netlink_rcv_skb+0x47/0x110 genl_rcv+0x24/0x40 netlink_unicast+0x217/0x2f0 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x30/0x40 __sys_sendto+0x10e/0x140 ? handle_mm_fault+0xc4/0x1f0 ? do_page_fault+0x33f/0x630 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 718ce4d601db ("net/mlx5: Consolidate update FTE for all removal changes") Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-22selftests: netfilter: remove unused cnt and simplify command testingFabian Frederick
cnt was not used in nft_meta.sh This patch also fixes 2 shellcheck SC2181 warnings: "check exit code directly with e.g. 'if mycmd;', not indirectly with $?." Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-09-22selftests: netfilter: fix nft_meta.sh error reportingFabian Frederick
When some test directly done with check_one_counter() fails, counter variable is undefined. This patch calls ip with cname which avoids errors like: FAIL: oskuidcounter, want "packets 2", got Error: syntax error, unexpected newline, expecting string list counter inet filter ^ Error is now correctly rendered: FAIL: oskuidcounter, want "packets 2", got table inet filter { counter oskuidcounter { packets 1 bytes 84 } } Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-09-22selftests: netfilter: add cpu counter checkFabian Frederick
run task on first CPU with netfilter counters reset and check cpu meta after another ping Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-09-21dm: fix comment in dm_process_bio()Mike Snitzer
Refer to the correct function (->submit_bio instead of ->queue_bio). Also, add details about why using blk_queue_split() isn't needed for dm_wq_work()'s call to dm_process_bio(). Fixes: c62b37d96b6eb ("block: move ->make_request_fn to struct block_device_operations") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-21dm: fix bio splitting and its bio completion order for regular IOMike Snitzer
dm_queue_split() is removed because __split_and_process_bio() _must_ handle splitting bios to ensure proper bio submission and completion ordering as a bio is split. Otherwise, multiple recursive calls to ->submit_bio will cause multiple split bios to be allocated from the same ->bio_split mempool at the same time. This would result in deadlock in low memory conditions because no progress could be made (only one bio is available in ->bio_split mempool). This fix has been verified to still fix the loss of performance, due to excess splitting, that commit 120c9257f5f1 provided. Fixes: 120c9257f5f1 ("Revert "dm: always call blk_queue_split() in dm_process_bio()"") Cc: stable@vger.kernel.org # 5.0+, requires custom backport due to 5.9 changes Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-21Merge tag 'mac80211-for-net-2020-09-21' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * fix using HE on 2.4 GHz * AQL (airtime queue limit) estimation & VHT160 fix * do not oversize A-MPDUs if local capability is smaller than peer's * fix radiotap on 6 GHz to not put 2.4 GHz flag * fix Kconfig for lib80211 * little fixlet for 6 GHz channel number / frequency conversion ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21ipv6: route: convert comma to semicolonXu Wang
Replace a comma between expression statements by a semicolon. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21Merge tag 'gpio-fixes-for-v5.9-rc6' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes gpio fixes for v5.9-rc6 - fix the interrupt configuration in gpio-tc35894 - explicitly support only threaded irqs in gpio-siox - fix a resource leak in error path in gpio-mockup - fix line event handling in syscall compatible mode in GPIO chardev
2020-09-21pinctrl: cherryview: Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOsHans de Goede
One some devices the GPIO should output the inverted value from what device-drivers / ACPI code expects. The reason for this is unknown, perhaps these systems use an external buffer chip on the GPIO which inverts the signal. The BIOS makes this work by setting the CHV_PADCTRL1_INVRXTX_TXDATA flag. Before this commit we would unconditionally clear all INVRXTX flags, including the CHV_PADCTRL1_INVRXTX_TXDATA flag when a GPIO is requested by a driver (from chv_gpio_request_enable()). This breaks systems using this setup. Specifically it is causing problems for systems with a goodix touchscreen, where the BIOS sets the INVRXTX_TXDATA flag on the GPIO used for the touchscreen's reset pin. The goodix touchscreen driver by defaults configures this pin as input (relying on the pull-up to keep it high), but the clearing of the INVRXTX_TXDATA flag done by chv_gpio_request_enable() causes it to be driven low for a brief time before the GPIO gets set to input mode. This causes the touchscreen controller to get reset. On most CHT devs with this touchscreen this leads to: [ 31.596534] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 1: -121 The driver retries this though and then everything is fine. But during reset the touchscreen uses its interrupt pin as bootstrap to determine which i2c address to use and on the Acer One S1003 the spurious reset caused by the clearing of the INVRXTX_TXDATA flag causes the controller to come back up again on the wrong i2c address, breaking things. This commit fixes both the -121 errors, as well as the total breakage on the Acer One S1003, by making chv_gpio_clear_triggering() not clear the INVRXTX_TXDATA flag if the pin is already configured as a GPIO. Note that chv_pinmux_set_mux() does still unconditionally clear the flag, so this only affects GPIO usage. Fixes: a7d4b171660c ("Input: goodix - add support for getting IRQ + reset GPIOs on Cherry Trail devices") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-21sfc: Fix error code in probeDan Carpenter
This failure path should return a negative error code but it currently returns success. Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21spi: fsl-espi: Only process interrupts for expected eventsChris Packham
The SPIE register contains counts for the TX FIFO so any time the irq handler was invoked we would attempt to process the RX/TX fifos. Use the SPIM value to mask the events so that we only process interrupts that were expected. This was a latent issue exposed by commit 3282a3da25bd ("powerpc/64: Implement soft interrupt replay in C"). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20200904002812.7300-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21regmap: fix page selection for noinc writesDmitry Baryshkov
Non-incrementing writes can fail if register + length crosses page border. However for non-incrementing writes we should not check for page border crossing. Fix this by passing additional flag to _regmap_raw_write and passing length to _regmap_select_page basing on the flag. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: cdf6b11daa77 ("regmap: Add regmap_noinc_write API") Link: https://lore.kernel.org/r/20200917153405.3139200-2-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21regmap: fix page selection for noinc readsDmitry Baryshkov
Non-incrementing reads can fail if register + length crosses page border. However for non-incrementing reads we should not check for page border crossing. Fix this by passing additional flag to _regmap_raw_read and passing length to _regmap_select_page basing on the flag. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 74fe7b551f33 ("regmap: Add regmap_noinc_read API") Link: https://lore.kernel.org/r/20200917153405.3139200-1-dmitry.baryshkov@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21libbpf: Fix native endian assumption when parsing BTFTony Ambardar
Code in btf__parse_raw() fails to detect raw BTF of non-native endianness and assumes it must be ELF data, which then fails to parse as ELF and yields a misleading error message: root:/# bpftool btf dump file /sys/kernel/btf/vmlinux libbpf: failed to get EHDR from /sys/kernel/btf/vmlinux For example, this could occur after cross-compiling a BTF-enabled kernel for a target with non-native endianness, which is currently unsupported. Check for correct endianness and emit a clearer error message: root:/# bpftool btf dump file /sys/kernel/btf/vmlinux libbpf: non-native BTF endianness is not supported Fixes: 94a1fedd63ed ("libbpf: Add btf__parse_raw() and generic btf__parse() APIs") Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/90f81508ecc57bc0da318e0fe0f45cfe49b17ea7.1600417359.git.Tony.Ambardar@gmail.com
2020-09-21bpf: Prevent .BTF section eliminationTony Ambardar
Systems with memory or disk constraints often reduce the kernel footprint by configuring LD_DEAD_CODE_DATA_ELIMINATION. However, this can result in removal of any BTF information. Use the KEEP() macro to preserve the BTF data as done with other important sections, while still allowing for smaller kernels. Fixes: 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF") Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/a635b5d3e2da044e7b51ec1315e8910fbce0083f.1600417359.git.Tony.Ambardar@gmail.com
2020-09-21bpf: Fix sysfs export of empty BTF sectionTony Ambardar
If BTF data is missing or removed from the ELF section it is still exported via sysfs as a zero-length file: root@OpenWrt:/# ls -l /sys/kernel/btf/vmlinux -r--r--r-- 1 root root 0 Jul 18 02:59 /sys/kernel/btf/vmlinux Moreover, reads from this file succeed and leak kernel data: root@OpenWrt:/# hexdump -C /sys/kernel/btf/vmlinux|head -10 000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 000cc0 00 00 00 00 00 00 00 00 00 00 00 00 80 83 b0 80 |................| 000cd0 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000ce0 00 00 00 00 00 00 00 00 00 00 00 00 57 ac 6e 9d |............W.n.| 000cf0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| * 002650 00 00 00 00 00 00 00 10 00 00 00 01 00 00 00 01 |................| 002660 80 82 9a c4 80 85 97 80 81 a9 51 68 00 00 00 02 |..........Qh....| 002670 80 25 44 dc 80 85 97 80 81 a9 50 24 81 ab c4 60 |.%D.......P$...`| This situation was first observed with kernel 5.4.x, cross-compiled for a MIPS target system. Fix by adding a sanity-check for export of zero-length data sections. Fixes: 341dfcf8d78e ("btf: expose BTF info through sysfs") Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/b38db205a66238f70823039a8c531535864eaac5.1600417359.git.Tony.Ambardar@gmail.com
2020-09-21Merge branch 'rcu/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU fix from Paul McKenney: "This contains a single commit that fixes a bug that was introduced in the last merge window. This bug causes a compiler warning complaining about show_rcu_tasks_classic_gp_kthread() being an unused static function in !SMP kernels. The fix is straightforward, just adding an 'inline' to make this a static inline function, thus avoiding the warning. This bug was reported by Laurent Pinchart, who would like it fixed sooner rather than later" * 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: rcu-tasks: Prevent complaints of unused show_rcu_tasks_classic_gp_kthread()
2020-09-21Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - fix fault on page table writes during instruction fetch s390: - doc improvement x86: - The obvious patches are always the ones that turn out to be completely broken. /me hangs his head in shame" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: Revert "KVM: Check the allocation of pv cpu mask" KVM: arm64: Remove S1PTW check from kvm_vcpu_dabt_iswrite() KVM: arm64: Assume write fault on S1PTW permission fault on instruction fetch docs: kvm: add documentation for KVM_CAP_S390_DIAG318
2020-09-21Merge tag 'libnvdimm-fixes-5.9-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dan Williams: "Fix compilation for the new dax_supported() exported helper" * tag 'libnvdimm-fixes-5.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAX
2020-09-21SUNRPC: Fix svc_flush_dcache()Chuck Lever
On platforms that implement flush_dcache_page(), a large NFS WRITE triggers the WARN_ONCE in bvec_iter_advance(): Sep 20 14:01:05 klimt.1015granger.net kernel: Attempted to advance past end of bvec iter Sep 20 14:01:05 klimt.1015granger.net kernel: WARNING: CPU: 0 PID: 1032 at include/linux/bvec.h:101 bvec_iter_advance.isra.0+0xa7/0x158 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: Call Trace: Sep 20 14:01:05 klimt.1015granger.net kernel: svc_tcp_recvfrom+0x60c/0x12c7 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? bvec_iter_advance.isra.0+0x158/0x158 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? del_timer_sync+0x4b/0x55 Sep 20 14:01:05 klimt.1015granger.net kernel: ? test_bit+0x1d/0x27 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: svc_recv+0x1193/0x15e4 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? try_to_freeze.isra.0+0x6f/0x6f [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? refcount_sub_and_test.constprop.0+0x13/0x40 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? svc_xprt_put+0x1e/0x29f [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: ? svc_send+0x39f/0x3c1 [sunrpc] Sep 20 14:01:05 klimt.1015granger.net kernel: nfsd+0x282/0x345 [nfsd] Sep 20 14:01:05 klimt.1015granger.net kernel: ? __kthread_parkme+0x74/0xba Sep 20 14:01:05 klimt.1015granger.net kernel: kthread+0x2ad/0x2bc Sep 20 14:01:05 klimt.1015granger.net kernel: ? nfsd_destroy+0x124/0x124 [nfsd] Sep 20 14:01:05 klimt.1015granger.net kernel: ? test_bit+0x1d/0x27 Sep 20 14:01:05 klimt.1015granger.net kernel: ? kthread_mod_delayed_work+0x115/0x115 Sep 20 14:01:05 klimt.1015granger.net kernel: ret_from_fork+0x22/0x30 Reported-by: He Zhe <zhe.he@windriver.com> Fixes: ca07eda33e01 ("SUNRPC: Refactor svc_recvfrom()") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-09-21cpuidle: psci: Fix suspicious RCU usageUlf Hansson
The commit eb1f00237aca ("lockdep,trace: Expose tracepoints"), started to expose us for tracepoints. This lead to the following RCU splat on an ARM64 Qcom board. [ 5.529634] WARNING: suspicious RCU usage [ 5.537307] sdhci-pltfm: SDHCI platform and OF driver helper [ 5.541092] 5.9.0-rc3 #86 Not tainted [ 5.541098] ----------------------------- [ 5.541105] ../include/trace/events/lock.h:37 suspicious rcu_dereference_check() usage! [ 5.541110] [ 5.541110] other info that might help us debug this: [ 5.541110] [ 5.541116] [ 5.541116] rcu_scheduler_active = 2, debug_locks = 1 [ 5.541122] RCU used illegally from extended quiescent state! [ 5.541129] no locks held by swapper/0/0. [ 5.541134] [ 5.541134] stack backtrace: [ 5.541143] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.9.0-rc3 #86 [ 5.541149] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 5.541157] Call trace: [ 5.568185] sdhci_msm 7864900.sdhci: Got CD GPIO [ 5.574186] dump_backtrace+0x0/0x1c8 [ 5.574206] show_stack+0x14/0x20 [ 5.574229] dump_stack+0xe8/0x154 [ 5.574250] lockdep_rcu_suspicious+0xd4/0xf8 [ 5.574269] lock_acquire+0x3f0/0x460 [ 5.574292] _raw_spin_lock_irqsave+0x80/0xb0 [ 5.574314] __pm_runtime_suspend+0x4c/0x188 [ 5.574341] psci_enter_domain_idle_state+0x40/0xa0 [ 5.574362] cpuidle_enter_state+0xc0/0x610 [ 5.646487] cpuidle_enter+0x38/0x50 [ 5.650651] call_cpuidle+0x18/0x40 [ 5.654467] do_idle+0x228/0x278 [ 5.657678] cpu_startup_entry+0x24/0x70 [ 5.661153] rest_init+0x1a4/0x278 [ 5.665061] arch_call_rest_init+0xc/0x14 [ 5.668272] start_kernel+0x508/0x540 Following the path in pm_runtime_put_sync_suspend() from psci_enter_domain_idle_state(), it seems like we end up using the RCU. Therefore, let's simply silence the splat by informing the RCU about it with RCU_NONIDLE. Note that, this is a temporary solution. Instead we should strive to avoid using RCU_NONIDLE (and similar), but rather push rcu_idle_enter|exit() further down, closer to the arch specific code. However, as the CPU PM notifiers are also using the RCU, additional rework is needed. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-21dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAXJan Kara
dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy implementation should be defined only in !CONFIG_DAX case, not in !CONFIG_FS_DAX case. Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support") Cc: <stable@vger.kernel.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-21io_uring: fix openat/openat2 unified prep handlingJens Axboe
A previous commit unified how we handle prep for these two functions, but this means that we check the allowed context (SQPOLL, specifically) later than we should. Move the ring type checking into the two parent functions, instead of doing it after we've done some setup work. Fixes: ec65fea5a8d7 ("io_uring: deduplicate io_openat{,2}_prep()") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: mark statx/files_update/epoll_ctl as non-SQPOLLJens Axboe
These will naturally fail when attempted through SQPOLL, but either with -EFAULT or -EBADF. Make it explicit that these are not workable through SQPOLL and return -EINVAL, just like other ops that need to use ->files. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21tools/io_uring: fix compile breakageDouglas Gilbert
It would seem none of the kernel continuous integration does this: $ cd tools/io_uring $ make Otherwise it may have noticed: cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o io_uring-bench.c io_uring-bench.c:133:12: error: static declaration of ‘gettid’ follows non-static declaration 133 | static int gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from io_uring-bench.c:27: /usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ make: *** [<builtin>: io_uring-bench.o] Error 1 The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h already defines gettid(). So prefix the local definition with "lk_". Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: don't use retry based buffered reads for non-async bdevJens Axboe
Some block devices, like dm, bubble back -EAGAIN through the completion handler. We check for this in io_read(), but don't honor it for when we have copied the iov. Return -EAGAIN for this case before retrying, to force punt to io-wq. Fixes: bcf5a06304d6 ("io_uring: support true async buffered reads, if file provides it") Reported-by: Zorro Lang <zlang@redhat.com> Tested-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: don't re-setup vecs/iter in io_resumit_prep() is already thereJens Axboe
If we already have mapped the necessary data for retry, then don't set it up again. It's a pointless operation, and we leak the iovec if it's a large (non-stack) vec. Fixes: b63534c41e20 ("io_uring: re-issue block requests that failed because of resources") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21rcu/tree: Export rcu_idle_{enter,exit} to modulesBorislav Petkov
Fix this link error: ERROR: modpost: "rcu_idle_enter" [drivers/acpi/processor.ko] undefined! ERROR: modpost: "rcu_idle_exit" [drivers/acpi/processor.ko] undefined! when CONFIG_ACPI_PROCESSOR is built as module. PeterZ says that in light of ARM needing those soon too, they should simply be exported. Fixes: 1fecfdbb7acc ("ACPI: processor: Take over RCU-idle for C3-BM idle") Reported-by: Sven Joachim <svenjoac@gmx.de> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Paul E. McKenney <paulmckrcu@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-21clk: tegra: Fix missing prototype for tegra210_clk_register_emc()Thierry Reding
Include the Tegra driver's clk.h to pull in the prototype definition for this function so that compilers don't warn about it being missing. Fixes: 0ac65fc946d3 ("clk: tegra: Implement Tegra210 EMC clock") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21clk: tegra: Always program PLL_E when enabledThierry Reding
Commit bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs") added checks to avoid enabling PLLs that have already been enabled by the bootloader. However, the PLL_E configuration inherited from the bootloader isn't necessarily the one that is needed for the kernel. This can cause SATA to fail like this: [ 5.310270] phy phy-sata.6: phy poweron failed --> -110 [ 5.315604] tegra-ahci 70027000.sata: failed to power on AHCI controller: -110 [ 5.323022] tegra-ahci: probe of 70027000.sata failed with error -110 Fix this by always programming the PLL_E. This ensures that any mis- configuration by the bootloader will be overwritten by the kernel. Fixes: bff1cef5f23a ("clk: tegra: Don't enable already enabled PLLs") Reported-by: LABBE Corentin <clabbe@baylibre.com> Tested-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21clk: tegra: Capitalization fixesThierry Reding
HW, XUSB and PLL are abbreviations and should be all-uppercase. Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-09-21btrfs: fix overflow when copying corrupt csums for a messageJohannes Thumshirn
Syzkaller reported a buffer overflow in btree_readpage_end_io_hook() when loop mounting a crafted image: detected buffer overflow in memcpy ------------[ cut here ]------------ kernel BUG at lib/string.c:1129! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 26 Comm: kworker/u4:2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: btrfs-endio-meta btrfs_work_helper RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000557335f440d0 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: memcpy include/linux/string.h:405 [inline] btree_readpage_end_io_hook.cold+0x206/0x221 fs/btrfs/disk-io.c:642 end_bio_extent_readpage+0x4de/0x10c0 fs/btrfs/extent_io.c:2854 bio_endio+0x3cf/0x7f0 block/bio.c:1449 end_workqueue_fn+0x114/0x170 fs/btrfs/disk-io.c:1695 btrfs_work_helper+0x221/0xe20 fs/btrfs/async-thread.c:318 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: ---[ end trace b68924293169feef ]--- RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95b7c4d008 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 The overflow happens, because in btree_readpage_end_io_hook() we assume that we have found a 4 byte checksum instead of the real possible 32 bytes we have for the checksums. With the fix applied: [ 35.726623] BTRFS: device fsid 815caf9a-dc43-4d2a-ac54-764b8333d765 devid 1 transid 5 /dev/loop0 scanned by syz-repro (215) [ 35.738994] BTRFS info (device loop0): disk space caching is enabled [ 35.738998] BTRFS info (device loop0): has skinny extents [ 35.743337] BTRFS warning (device loop0): loop0 checksum verify failed on 1052672 wanted 0xf9c035fc8d239a54 found 0x67a25c14b7eabcf9 level 0 [ 35.743420] BTRFS error (device loop0): failed to read chunk root [ 35.745899] BTRFS error (device loop0): open_ctree failed Reported-by: syzbot+e864a35d361e1d4e29a5@syzkaller.appspotmail.com Fixes: d5178578bcd4 ("btrfs: directly call into crypto framework for checksumming") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-21Revert "ALSA: hda - Fix silent audio output and corrupted input on MSI ↵Takashi Iwai
X570-A PRO" This reverts commit 15cbff3fbbc6 ("ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO"). A regression reported by a Fedora user for MSI X570-A PRO mobo. Until the correct solution is found out, let's revert the quirk as a quick workaround. Fixes: 15cbff3fbbc6 ("ALSA: hda - Fix silent audio output and corrupted input on MSI X570-A PRO") Reported-by: Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Cc: Dan Crawford <dnlcrwfrd@gmail.com> BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1879277 Link: https://lore.kernel.org/r/7efd2fe5-bf38-7f85-891a-eee3845d1493@redhat.com Link: https://lore.kernel.org/r/20200921102632.31139-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-21i2c: i801: Exclude device from suspend direct complete optimizationJean Delvare
By default, PCI drivers with runtime PM enabled will skip the calls to suspend and resume on system PM. For this driver, we don't want that, as we need to perform additional steps for system PM to work properly on all systems. So instruct the PM core to not skip these calls. Fixes: a9c8088c7988 ("i2c: i801: Don't restore config registers on runtime PM") Reported-by: Volker Rümelin <volker.ruemelin@googlemail.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21dmabuf: fix NULL pointer dereference in dma_buf_release()Charan Teja Reddy
NULL pointer dereference is observed while exporting the dmabuf but failed to allocate the 'struct file' which results into the dropping of the allocated dentry corresponding to this file in the dmabuf fs, which is ending up in dma_buf_release() and accessing the uninitialzed dentry->d_fsdata. Call stack on 5.4 is below: dma_buf_release+0x2c/0x254 drivers/dma-buf/dma-buf.c:88 __dentry_kill+0x294/0x31c fs/dcache.c:584 dentry_kill fs/dcache.c:673 [inline] dput+0x250/0x380 fs/dcache.c:859 path_put+0x24/0x40 fs/namei.c:485 alloc_file_pseudo+0x1a4/0x200 fs/file_table.c:235 dma_buf_getfile drivers/dma-buf/dma-buf.c:473 [inline] dma_buf_export+0x25c/0x3ec drivers/dma-buf/dma-buf.c:585 Fix this by checking for the valid pointer in the dentry->d_fsdata. Fixes: 4ab59c3c638c ("dma-buf: Move dma_buf_release() from fops to dentry_ops") Cc: <stable@vger.kernel.org> [5.7+] Signed-off-by: Charan Teja Reddy <charante@codeaurora.org> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/391319/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-09-21ALSA: usb-audio: Add delay quirk for H570e USB headsetsJoakim Tjernlund
Needs the same delay as H650e Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200910085328.19188-1-joakim.tjernlund@infinera.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-21ALSA: hda/realtek: Enable front panel headset LED on Lenovo ThinkStation P520Kai-Heng Feng
On Lenovo P520, the front panel headset LED isn't lit up right now. Realtek states that the LED needs to be enabled by ALC233's GPIO2, so let's do it accordingly to light the LED up. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by: Hui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200914070231.13192-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-21ALSA: hda/realtek - Couldn't detect Mic if booting with headset pluggedHui Wang
We found a Mic detection issue on many Lenovo laptops, those laptops belong to differnt models and they have different audio design like internal mic connects to the codec or PCH, they all have this problem, the problem is if plugging a headset before powerup/reboot the machine, after booting up, the headphone could be detected but Mic couldn't. If we plug out and plug in the headset, both headphone and Mic could be detected then. Through debugging we found the codec on those laptops are same, it is alc257, and if we don't disable the 3k pulldown in alc256_shutup(), the issue will be fixed. So far there is no pop noise or power consumption regression on those laptops after this change. Cc: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200914065118.19238-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-21ALSA: asihpi: fix iounmap in error handlerTom Rix
clang static analysis flags this problem hpioctl.c:513:7: warning: Branch condition evaluates to a garbage value if (pci.ap_mem_base[idx]) { ^~~~~~~~~~~~~~~~~~~~ If there is a failure in the middle of the memory space loop, only some of the memory spaces need to be cleaned up. At the error handler, idx holds the number of successful memory spaces mapped. So rework the handler loop to use the old idx. There is a second problem, the memory space loop conditionally iomaps()/sets the mem_base so it is necessay to initize pci. Fixes: 719f82d3987a ("ALSA: Add support of AudioScience ASI boards") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20200913165230.17166-1-trix@redhat.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-20Merge branch 'bnxt_en-Bug-fixes'David S. Miller
Michael Chan says: ==================== bnxt_en: Bug fixes. A series of small driver fixes covering VPD length logic, ethtool_get_regs on VF, hwmon temperature error handling, mutex locking for EEE and pause ethtool settings, and parameters for statistics related firmware calls. Please queue patches 1, 2, and 3 for -stable. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20bnxt_en: Fix wrong flag value passed to HWRM_PORT_QSTATS_EXT fw call.Michael Chan
The wrong flag value caused the firmware call to return actual port counters instead of the counter masks. This messed up the counter overflow logic and caused erratic extended port counters to be displayed under ethtool -S. Fixes: 531d1d269c1d ("bnxt_en: Retrieve hardware masks for port counters.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20bnxt_en: Fix HWRM_FUNC_QSTATS_EXT firmware call.Michael Chan
Fix it to set the required fid input parameter. The firmware call fails without this patch. Fixes: d752d0536c97 ("bnxt_en: Retrieve hardware counter masks from firmware if available.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-13 12:41:15 +0000