summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-26MAINTAINERS: Update qlogic networking driversMintz, Yuval
Following Cavium's acquisition of qlogic we need to update all the qlogic drivers maintainer's entries to point to our new e-mail addresses, as well as update some of the driver's maintainers as those are no longer working for Cavium. I would like to thank Sony Chacko and Rajesh Borundia for their support and development of our various networking drivers. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26netvsc: fix incorrect receive checksum offloadingStephen Hemminger
The Hyper-V netvsc driver was looking at the incorrect status bits in the checksum info. It was setting the receive checksum unnecessary flag based on the IP header checksum being correct. The checksum flag is skb is about TCP and UDP checksum status. Because of this bug, any packet received with bad TCP checksum would be passed up the stack and to the application causing data corruption. The problem is reproducible via netcat and netem. This had a side effect of not doing receive checksum offload on IPv6. The driver was also also always doing checksum offload independent of the checksum setting done via ethtool. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmwareChing Huang
The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Cc: <stable@vger.kernel.org> Signed-off-by: Ching Huang <ching2048@areca.com.tw> Reported-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-26scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloadedEwan D. Milne
map_storep was not being vfree()'d in the module_exit call. Cc: <stable@vger.kernel.org> Signed-off-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-10-26udp: fix IP_CHECKSUM handlingEric Dumazet
First bug was added in commit ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") : Tom missed that ipv4 udp messages could be received on AF_INET6 socket. ip_cmsg_recv(msg, skb) should have been replaced by ip_cmsg_recv_offset(msg, skb, sizeof(struct udphdr)); Then commit e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") forgot to adjust the offsets now UDP headers are pulled before skb are put in receive queue. Fixes: ad6f939ab193 ("ip: Add offset parameter to ip_cmsg_recv") Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sam Kumar <samanthakumar@google.com> Cc: Willem de Bruijn <willemb@google.com> Tested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26sctp: fix the panic caused by route updateXin Long
Commit 7303a1475008 ("sctp: identify chunks that need to be fragmented at IP level") made the chunk be fragmented at IP level in the next round if it's size exceed PMTU. But there still is another case, PMTU can be updated if transport's dst expires and transport's pmtu_pending is set in sctp_packet_transmit. If the new PMTU is less than the chunk, the same issue with that commit can be triggered. So we should drop this packet and let it retransmit in another round where it would be fragmented at IP level. This patch is to fix it by checking the chunk size after PMTU may be updated and dropping this packet if it's size exceed PMTU. Fixes: 90017accff61 ("sctp: Add GSO support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@txudriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26doc: update docbook annotations for socket and skbStephen Hemminger
The skbuff and sock structure both had missing parameter annotation values. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26rocker: fix error return code in rocker_world_check_init()Wei Yongjun
Fix to return error code -EINVAL from the error handling case instead of 0, as done elsewhere in this function. Fixes: e420114eef4a ("rocker: introduce worlds infrastructure") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26sunrpc: don't pass on-stack memory to sg_set_bufJ. Bruce Fields
As of ac4e97abce9b "scatterlist: sg_set_buf() argument must be in linear mapping", sg_set_buf hits a BUG when make_checksum_v2->xdr_process_buf, among other callers, passes it memory on the stack. We only need a scatterlist to pass this to the crypto code, and it seems like overkill to require kmalloc'd memory just to encrypt a few bytes, but for now this seems the best fix. Many of these callers are in the NFS write paths, so we allocate with GFP_NOFS. It might be possible to do without allocations here entirely, but that would probably be a bigger project. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-10-26vfio/pci: Fix integer overflows, bitmask checkVlad Tsyrklevich
The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize user-supplied integers, potentially allowing memory corruption. This patch adds appropriate integer overflow checks, checks the range bounds for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set. VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in vfio_pci_set_irqs_ioctl(). Furthermore, a kzalloc is changed to a kcalloc because the use of a kzalloc with an integer multiplication allowed an integer overflow condition to be reached without this patch. kcalloc checks for overflow and should prevent a similar occurrence. Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2016-10-26PCI: qcom: Fix pp->dev usage before assignmentSrinivas Kandagatla
Initialize pp->dev in qcom_pcie_probe() before calling get_resources(), which uses it. [bhelgaas: changelog] Fixes: e6a087eeaf91 ("PCI: qcom: Remove redundant struct qcom_pcie.dev") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-26drm/radeon/si_dpm: workaround for SI kickersAlex Deucher
Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-26drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable.Rex Zhu
the value of last_mclk_dpm_enable_mask will be changed if other clients(vce,dal) trigger set power state between enable and disable uvd dpm. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-10-26arm64: mm: fix __page_to_voff definitionNeeraj Upadhyay
Fix parameter name for __page_to_voff, to match its definition. At present, we don't see any issue, as page_to_virt's caller declares 'page'. Fixes: 9f2875912dac ("arm64: mm: restrict virt_to_page() to the linear mapping") Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-26arm64/numa: fix incorrect log for memory-less nodeHanjun Guo
When booting on NUMA system with memory-less node (no memory dimm on this memory controller), the print for setup_node_data() is incorrect: NUMA: Initmem setup node 2 [mem 0x00000000-0xffffffffffffffff] It can be fixed by printing [mem 0x00000000-0x00000000] when end_pfn is 0, but print <memory-less node> will be more useful. Fixes: 1a2db300348b ("arm64, numa: Add NUMA support for arm64 platforms.") Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ganapatrao Kulkarni <gkulkarni@caviumnetworks.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-26arm64/numa: fix pcpu_cpu_distance() to get correct CPU proximityYisheng Xie
The pcpu_build_alloc_info() function group CPUs according to their proximity, by call callback function @cpu_distance_fn from different ARCHs. For arm64 the callback of @cpu_distance_fn is pcpu_cpu_distance(from, to) -> node_distance(from, to) The @from and @to for function node_distance() should be nid. However, pcpu_cpu_distance() in arch/arm64/mm/numa.c just past the cpu id for @from and @to, and didn't convert to numa node id. For this incorrect cpu proximity get from ARCH, it may cause each CPU in one group and make group_cnt out of bound: setup_per_cpu_areas() pcpu_embed_first_chunk() pcpu_build_alloc_info() in pcpu_build_alloc_info, since cpu_distance_fn will return REMOTE_DISTANCE if we pass cpu ids (0,1,2...), so cpu_distance_fn(cpu, tcpu) > LOCAL_DISTANCE will wrongly be ture. This may results in triggering the BUG_ON(unit != nr_units) later: [ 0.000000] kernel BUG at mm/percpu.c:1916! [ 0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc1-00003-g14155ca-dirty #26 [ 0.000000] Hardware name: Hisilicon Hi1616 Evaluation Board (DT) [ 0.000000] task: ffff000008d6e900 task.stack: ffff000008d60000 [ 0.000000] PC is at pcpu_embed_first_chunk+0x420/0x704 [ 0.000000] LR is at pcpu_embed_first_chunk+0x3bc/0x704 [ 0.000000] pc : [<ffff000008c754f4>] lr : [<ffff000008c75490>] pstate: 800000c5 [ 0.000000] sp : ffff000008d63eb0 [ 0.000000] x29: ffff000008d63eb0 [ 0.000000] x28: 0000000000000000 [ 0.000000] x27: 0000000000000040 [ 0.000000] x26: ffff8413fbfcef00 [ 0.000000] x25: 0000000000000042 [ 0.000000] x24: 0000000000000042 [ 0.000000] x23: 0000000000001000 [ 0.000000] x22: 0000000000000046 [ 0.000000] x21: 0000000000000001 [ 0.000000] x20: ffff000008cb3bc8 [ 0.000000] x19: ffff8413fbfcf570 [ 0.000000] x18: 0000000000000000 [ 0.000000] x17: ffff000008e49ae0 [ 0.000000] x16: 0000000000000003 [ 0.000000] x15: 000000000000001e [ 0.000000] x14: 0000000000000004 [ 0.000000] x13: 0000000000000000 [ 0.000000] x12: 000000000000006f [ 0.000000] x11: 00000413fbffff00 [ 0.000000] x10: 0000000000000004 [ 0.000000] x9 : 0000000000000000 [ 0.000000] x8 : 0000000000000001 [ 0.000000] x7 : ffff8413fbfcf63c [ 0.000000] x6 : ffff000008d65d28 [ 0.000000] x5 : ffff000008d65e50 [ 0.000000] x4 : 0000000000000000 [ 0.000000] x3 : ffff000008cb3cc8 [ 0.000000] x2 : 0000000000000040 [ 0.000000] x1 : 0000000000000040 [ 0.000000] x0 : 0000000000000000 [...] [ 0.000000] Call trace: [ 0.000000] Exception stack(0xffff000008d63ce0 to 0xffff000008d63e10) [ 0.000000] 3ce0: ffff8413fbfcf570 0001000000000000 ffff000008d63eb0 ffff000008c754f4 [ 0.000000] 3d00: ffff000008d63d50 ffff0000081af210 00000413fbfff010 0000000000001000 [ 0.000000] 3d20: ffff000008d63d50 ffff0000081af220 00000413fbfff010 0000000000001000 [ 0.000000] 3d40: 00000413fbfcef00 0000000000000004 ffff000008d63db0 ffff0000081af390 [ 0.000000] 3d60: 00000413fbfcef00 0000000000001000 0000000000000000 0000000000001000 [ 0.000000] 3d80: 0000000000000000 0000000000000040 0000000000000040 ffff000008cb3cc8 [ 0.000000] 3da0: 0000000000000000 ffff000008d65e50 ffff000008d65d28 ffff8413fbfcf63c [ 0.000000] 3dc0: 0000000000000001 0000000000000000 0000000000000004 00000413fbffff00 [ 0.000000] 3de0: 000000000000006f 0000000000000000 0000000000000004 000000000000001e [ 0.000000] 3e00: 0000000000000003 ffff000008e49ae0 [ 0.000000] [<ffff000008c754f4>] pcpu_embed_first_chunk+0x420/0x704 [ 0.000000] [<ffff000008c6658c>] setup_per_cpu_areas+0x38/0xc8 [ 0.000000] [<ffff000008c608d8>] start_kernel+0x10c/0x390 [ 0.000000] [<ffff000008c601d8>] __primary_switched+0x5c/0x64 [ 0.000000] Code: b8018660 17ffffd7 6b16037f 54000080 (d4210000) [ 0.000000] ---[ end trace 0000000000000000 ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! Fix by getting cpu's node id with early_cpu_to_node() then pass it to node_distance() as the original intention. Fixes: 7af3a0a99252 ("arm64/numa: support HAVE_SETUP_PER_CPU_AREA") Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-10-26sparc64: Fix illegal relative branches in hypervisor patched TLB cross-call ↵David S. Miller
code. Just like the non-cross-call TLB flush handlers, the cross-call ones need to avoid doing PC-relative branches outside of their code blocks. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26sparc64: Fix instruction count in comment for __hypervisor_flush_tlb_pending.David S. Miller
Noticed by James Clarke. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-26drm/dp/mst: Check peer device type before attempting EDID readVille Syrjälä
Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com
2016-10-26drm/dp/mst: Clear port->pdt when tearing down the i2c adapterVille Syrjälä
The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. Quoting a follow-up from Ville: "And naturally I forgot to amend the commit message w.r.t. this guy [the change in drm_dp_destroy_port]. We don't really need to do this here, but I figured I'd try to be a bit more consistent by having it, just to avoid accidental mistakes if/when someone changes this stuff again later." v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> (v1) Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-26drm/fb-helper: Keep references for the current set of used connectorsVille Syrjälä
The fbdev helper code keeps around two lists of connectors. One is the list of all connectors it could use, and that list already holds references for all the connectors. However the other list, or rather lists, is the one actively being used. That list is tracked per-crtc and currently doesn't hold any extra references. Let's grab those extra references to avoid oopsing when the connector vanishes. The list of all possible connectors should get updated when the hpd happens, but the list of actively used connectors would not get updated until the next time the fb-helper picks through the set of possible connectors. And so we need to hang on to the connectors until that time. Since we need to clean up in drm_fb_helper_crtc_free() as well, let's pull the code to a common place. And while at it let's pull in up the modeset->mode cleanup in there as well. The case of modeset->fb is a bit less clear. I'm thinking we should probably hold a reference to it, but for now I just slapped on a FIXME. v2: Cleanup things drm_fb_helper_crtc_free() too (Chris) v3: Don't leak modeset->connectors (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> (v1) Tested-by: Kirill A. Shutemov <kirill@shutemov.name> (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-26drm: Don't force all planes to be added to the state due to zposVille Syrjälä
We don't want all planes to be added to the state whenever a plane with fixed zpos gets enabled/disabled. This is true especially for eg. cursor planes on i915, as we want cursor updates to go through w/o throttling. Same holds for drivers that don't support zpos at all (i915 actually falls into this category right now since we've not yet added zpos support). Allow drivers more freedom by letting them deal with zpos themselves instead of doing it in drm_atomic_helper_check_planes() unconditionally. Let's just inline the required calls into all the driver that currently depend on this. v2: Inline the stuff into the drivers instead of adding another helper, document things better (Daniel) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lyude <cpaul@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org Fixes: 44d1240d006c ("drm: add generic zpos property") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com
2016-10-26ASoC: rsnd: clear SSI_SYS_STATUSx every timeKuninori Morimoto
Renesas sound SSIU has SSI_SYS_STATUS register whick will be changed if over/under run was occurred. Current rsnd driver is handling over/under run error on SSI/SRC, but doesn't on SSIU. HW guys can't guarantee correct behavior if it already had error bit on status register when it start. Thus, it should be cleared every start timing. This patch do it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: rsnd: fixup SCU_SYS_STATUSx accessKuninori Morimoto
SCU_SYS_STATUSx is the register that writing 1 initializes the bit, and writing 0 is ignored. So, it should use rsnd_mod_write() instead of rsnd_mod_bset(), otherwise all bit will be cleared. Thanks Shimoda-san Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: rsnd: rsnd_reg cleanup for SSIUKuninori Morimoto
R-Car Gen1 didn't have SSIU IP, and it was part of SRU. In Gen2, SSIU was created and it has original register. Let's cleanup rsnd_reg for SSIU, because this driver doesn't support Gen1 SRU any more. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: rsnd: remove "Gen2 only" commentKuninori Morimoto
Gen1 support had been removed. "Gen2 only" comment is no longer needed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: arizona: Access driver data through platform from compressed opsCharles Keepax
As the compressed ops run on the platform side of things we should really access the driver data through the platform pointer rather than the CODEC pointer. As the compressed DAIs in our systems always connect our CODEC to our platform this has never been an issue, but should still be corrected. Additionally it clears the way for future core refactoring work. Reported-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: cs47l24: Fixup missing variable typoCharles Keepax
Fixes: 31833ead95c2 ("ASoC: arizona: Move request of speaker IRQs into bus probe") Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26block: flush: fix IO hang in case of flood fua reqMing Lei
This patch fixes one issue reported by Kent, which can be triggered in bcachefs over sata disk. Actually it is a generic issue in block flush vs. blk-tag. Cc: Christoph Hellwig <hch@infradead.org> Reported-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-26drm/fb-helper: Fix connector ref leak on errorVille Syrjälä
We need to drop the connector references already taken when we abort in the middle of drm_fb_helper_single_add_all_connectors() Cc: stable@vger.kernel.org Cc: Carlos Santa <carlos.santa@intel.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Tested-by: Carlos Santa <carlos.santa@intel.com> Tested-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-2-git-send-email-ville.syrjala@linux.intel.com
2016-10-26ASoC: rsnd: enable COMPILE_TESTKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: rsnd: depends on OFKuninori Morimoto
Current Renesas sound driver is completely depends on CONFIG_OF Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26KVM: fix OOPS on flush_workPaolo Bonzini
The conversion done by commit 3706feacd007 ("KVM: Remove deprecated create_singlethread_workqueue") is broken. It flushes a single work item &irqfd->shutdown instead of all of them, and even worse if there is no irqfd on the list then you get a NULL pointer dereference. Revert the virt/kvm/eventfd.c part of that patch; to avoid the deprecated function, just allocate our own workqueue---it does not even have to be unbound---with alloc_workqueue. Fixes: 3706feacd007 Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-26KVM: s390: Fix STHYI buffer alignment for diag224Janosch Frank
Diag224 requires a page-aligned 4k buffer to store the name table into. kmalloc does not guarantee page alignment, hence we replace it with __get_free_page for the buffer allocation. Cc: stable@vger.kernel.org # v4.8+ Reported-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2016-10-26KVM: MIPS: Precalculate MMIO load resume PCJames Hogan
The advancing of the PC when completing an MMIO load is done before re-entering the guest, i.e. before restoring the guest ASID. However if the load is in a branch delay slot it may need to access guest code to read the prior branch instruction. This isn't safe in TLB mapped code at the moment, nor in the future when we'll access unmapped guest segments using direct user accessors too, as it could read the branch from host user memory instead. Therefore calculate the resume PC in advance while we're still in the right context and save it in the new vcpu->arch.io_pc (replacing the no longer needed vcpu->arch.pending_load_cause), and restore it on MMIO completion. Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-26KVM: MIPS: Make ERET handle ERL before EXLJames Hogan
The ERET instruction to return from exception is used for returning from exception level (Status.EXL) and error level (Status.ERL). If both bits are set however we should be returning from ERL first, as ERL can interrupt EXL, for example when an NMI is taken. KVM however checks EXL first. Fix the order of the checks to match the pseudocode in the instruction set manual. Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10.x- Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-26KVM: MIPS: Fix lazy user ASID regenerate for SMPJames Hogan
kvm_mips_check_asids() runs before entering the guest and performs lazy regeneration of host ASID for guest usermode, using last_user_gasid to track the last guest ASID in the VCPU that was used by guest usermode on any host CPU. last_user_gasid is reset after performing the lazy ASID regeneration on the current CPU, and by kvm_arch_vcpu_load() if the host ASID for guest usermode is regenerated due to staleness (to cancel outstanding lazy ASID regenerations). Unfortunately neither case handles SMP hosts correctly: - When the lazy ASID regeneration is performed it should apply to all CPUs (as last_user_gasid does), so reset the ASID on other CPUs to zero to trigger regeneration when the VCPU is next loaded on those CPUs. - When the ASID is found to be stale on the current CPU, we should not cancel lazy ASID regenerations globally, so drop the reset of last_user_gasid altogether here. Both cases would require a guest ASID change and two host CPU migrations (and in the latter case one of the CPUs to start a new ASID cycle) before guest usermode could potentially access stale user pages from a previously running ASID in the same VCPU. Fixes: 25b08c7fb0e4 ("KVM: MIPS: Invalidate TLB by regenerating ASIDs") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-10-26ASoC: sti-sas: enable fast io for regmapArnaud Pouliquen
Some registers accesses are done in atomic context. Enable fast io to use spinlock instead of mutex to protect access. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: sti-sas: add missing return in messages stringsArnaud Pouliquen
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: sti-sas: clean legacy in sti-sasArnaud Pouliquen
stih416 is no more supported, clean associated code. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: sti: fix channel status update after playback startArnaud Pouliquen
If 'IEC958 Playback Default' control is updated during playback, Channel status needs to be set according to the runtime structure. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: sti: clean unused includeArnaud Pouliquen
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: sti: reset refactoringArnaud Pouliquen
Reset is common to player and reader, migrate function in sti_uniperif.c Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: sti: fix errors managementArnaud Pouliquen
Add missing error messages. Propagate error of uni_reader_init and uni_reader_init. Add return at end of dev_err strings. Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26x86: Fix export for mcount and __fentry__Steven Rostedt
Commit 784d5699eddc5 ("x86: move exports to actual definitions") removed the EXPORT_SYMBOL(__fentry__) and EXPORT_SYMBOL(mcount) from x8664_ksyms_64.c, and added EXPORT_SYMBOL(function_hook) in mcount_64.S instead. The problem is that function_hook isn't a function at all, but a macro that is defined as either mcount or __fentry__ depending on the support from gcc. Originally, I thought this was a macro issue, like what __stringify() is used for. But the problem is a bit deeper. The Makefile.build has some magic that does post processing of files to create the CRC bindings. It does some searches for EXPORT_SYMBOL() and because it finds a macro name and not the actual functions, this causes function_hook not to be converted into mcount or __fentry__ and they are missed. Instead of adding more magic to Makefile.build, just add EXPORT_SYMBOL() for mcount and __fentry__ where the ifdef is used. Since this is assembly and not C, it doesn't require being set after the function is defined. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Borislav Petkov <bp@alien8.de> Cc: Gabriel C <nix.or.die@gmail.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/r/20161024150148.4f9d90e4@gandalf.local.home Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-26ASoC: Codec to codec dai link descriptionanish kumar
Signed-off-by: anish kumar <yesanishhere@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26spi: fsl-espi: avoid processing uninitalized data on errorArnd Bergmann
When we get a spurious interrupt in fsl_espi_irq, we end up processing four uninitalized bytes of data, as shown in this warning message: drivers/spi/spi-fsl-espi.c: In function 'fsl_espi_irq': drivers/spi/spi-fsl-espi.c:462:4: warning: 'rx_data' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds another check so we skip the data in this case. Fixes: 6319a68011b8 ("spi/fsl-espi: avoid infinite loops on fsl_espi_cpu_irq()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-10-26SoC: mxs-saif: check validity of ids in mxs_saif_probe()Alexey Khoroshilov
There is a check for validity of one of ids in mxs_saif_probe(), while array dereferece is made by the other id. The patch adds the check for the second saif id. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: Intel: Skylake: Fix a shift wrapping bugDan Carpenter
"*val" is a u64. It definitely looks like we intend to use the high 32 bits as well. Fixes: 700a9a63f9c1 ("ASoC: Intel: Skylake: Add module instance id generation APIs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Tested-by: Kranthi G <gudishax.kranthikumar@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26ASoC: arizona: Move request of DSP IRQ into bus probeCharles Keepax
It is more idiomatic to request all resources in the bus level probe, this patch moves the request of the DSP compressed data IRQ from the ASoC level probe into the bus level probe. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-20 15:21:12 +0000