summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-24qtnfmac: validate interface combinations on changesSergey Matyukevich
Validate new interface combinations using wireless core checks when new interface is added or when the type of existing interface is modified. This is performed to make sure that new interface combination is supported by hardware. As a result, invalid interface combinations are rejected early, rather than passed to hardware with sometimes unpredictable results. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: modify supported interface combinationsSergey Matyukevich
Update existing code handling configuration of supported interface combinations. Current implementation is not complete since it does not report multiple interface combinations which are incompatible with each other. Instead current implementation packs all the supported combinations into single entry. In fact currently qsr10g wireless card supports the following two distinct interface combinations: 1. STA/repeater: 1 STA and/or 1 AP { { .max = 1, .types = NL80211_IFTYPE_AP}, { .max = 1, .types = NL80211_IFTYPE_STA}, } 2. AP/mBSS { { .max = 8, .types = NL80211_IFTYPE_AP}, } The list of supported configuration is reported by firmware during wireless card bring-up. Communication protocol between firmware and host has been updated accordingly in order to accommodate passing multiple interface combination entries. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: report hardware/firmware information via ethtoolVasily Ulyanov
Enable reporting of qtnfmac hardware and firmware details using ethtool command. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: get more hardware info from cardVasily Ulyanov
Various bits of hardware and firmware versions are useful for debug and troubleshooting. Get more information from the wireless card. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: support 64-bit network interface statsVasily Ulyanov
On 32-bit platforms packet counters are stored in a net_device_stats struct as unsigned long integers. As a result, after some time of network activity an overflow takes place in network packet counters. This patch makes use of new structs for holding interface statistics. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: fix warnings when mBSS setup is stoppedVasily Ulyanov
Virtual interface should be deleted after calling unregister_netdevice since this function ends up with sending updown_intf command to card. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24qtnfmac: remove struct qlink_cmd_set_mac_aclVasily Ulyanov
TLV is used to pass ACL data to firmware in start_ap cfg80211 callback. Use the same approach in set_mac_acl cfg80211 callback. Signed-off-by: Vasily Ulyanov <vulyanov@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24mlxsw: spectrum_router: Don't log an error on missing neighborYuval Mintz
Driver periodically samples all neighbors configured in device in order to update the kernel regarding their state. When finding an entry configured in HW that doesn't show in neigh_lookup() driver logs an error message. This introduces a race when removing multiple neighbors - it's possible that a given entry would still be configured in HW as its removal is still being processed but is already removed from the kernel's neighbor tables. Simply remove the error message and gracefully accept such events. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca11b9 ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24Merge branch 'cxgb4-fix-build-error'David S. Miller
Rahul Lakkireddy says: ==================== cxgb4: fix build error Patch 1 fixes build error with compiling cudbg_zlib.c when CONFIG_ZLIB_DEFLATE macro is not defined. Patch 2 fixes following sparse warning: "Using plain integer as NULL pointer" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4: properly initialize variablesRahul Lakkireddy
memset variables to 0 to fix sparse warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_cudbg.c:409:42: sparse: Using plain integer as NULL pointer drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:43:47: sparse: Using plain integer as NULL pointer Fixes: ad75b7d32f25 ("cxgb4: implement ethtool dump data operations") Fixes: 91c1953de387 ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4: enable ZLIB_DEFLATE when building cxgb4Rahul Lakkireddy
Fixes: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:39:5: error: redefinition of 'cudbg_compress_buff' int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ In file included from drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.c:23:0: drivers/net/ethernet/chelsio/cxgb4/cudbg_zlib.h:45:19: note: previous definition of 'cudbg_compress_buff' was here static inline int cudbg_compress_buff(struct cudbg_init *pdbg_init, ^~~~~~~~~~~~~~~~~~~ Fixes: 91c1953de387 ("cxgb4: use zlib deflate to compress firmware dump") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24Merge branch 'net-smc-socket-closing-improvements'David S. Miller
Ursula Braun says: ==================== net/smc: socket closing improvements while the first 2 patches are just small cleanups, the remaing patches affect socket closing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: continue waiting if peer signals write_shutdownUrsula Braun
If the peer sends a shutdown WRITE, this should not affect sending in general, and waiting for send buffer space in particular. Stop waiting of the local socket for send buffer space only, if peer signals closing, but not if peer signals just shutdown WRITE. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: improve state change handling after close waitUrsula Braun
When a socket is closed or shutdown, smc waits for data being transmitted in certain states. If the state changes during this wait, the close switch depending on state should be reentered. In addition, state change is avoided if sending of close or shutdown fails. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: make wait for work request uninterruptibleUrsula Braun
Work requests are needed for every ib_post_send(), among them the ib_post_send() to signal closing. If an smc socket program is cancelled, the smc connections should be cleaned up, and require sending of closing signals to the peer. This may fail, if a wait for a free work request is needed, but is cancelled immediately due to the cancel interrupt. To guarantee notification of the peer, the wait for a work request is changed to uninterruptible. And the area to receive work request completion info with ib_poll_cq() is cleared first. And _tx_ variable names are used in the _tx_routines for the demultiplexing common type in the header. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: get rid of tx_pend waits in socket closingUrsula Braun
There is no need to wait for confirmation of pending tx requests for a closing connection, since pending tx slots are dismissed when finishing a connection. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: simplify function smc_clcsock_accept()Ursula Braun
Cleanup to avoid duplicate code in smc_clcsock_accept(). No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24net/smc: use local struct sock variables consistentlyUrsula Braun
Cleanup to consistently exploit the local struct sock definitions. No functional change. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24KVM: s390: add vcpu stat counters for many instructionChristian Borntraeger
The overall instruction counter is larger than the sum of the single counters. We should try to catch all instruction handlers to make this match the summary counter. Let us add sck,tb,sske,iske,rrbe,tb,tpi,tsch,lpsw,pswe.... and remove other unused ones. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2018-01-24cxgb4/cxgb4vf: add support for ndo_set_vf_vlanGanesh Goudar
implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24rtl8xxxu: Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24bpf, doc: Correct one wrong value in "Register value tracking"Wang YanQing
If we then OR this with 0x40, then the value of 6th bit (0th is first bit) become known, so the right mask is 0xbf instead of 0xcf. Signed-off-by: Wang YanQing <udknight@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-24rtlwifi: Add spec_ver to check whether use new rate-id or notPing-Ke Shih
The field spec_ver is IC's specification mask for common code to do proper process to specified IC. This commit add a field new rate ID for new generation IC. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: Add ratr_table for newer ICPing-Ke Shih
New generation ICs will support 11ac, 5G, n-NSS, etc, so we define a set of rate ID. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: 8822be has to report vht capability to mac80211Ping-Ke Shih
8822be is 2x2 11ac wifi chip, so report VHT capability to mac80211. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: add boolean variables dbg_modePing-Ke Shih
In files halbtc8822b1ant.c and halbtc8822b2ant.c that I will submit later, two undesired directives named BT_8822B_1ANT_COEX_DBG and BT_8822B_2ANT_COEX_DBG will be replaced by boolean variables. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: Add wifi_only series ops to control solo cardPing-Ke Shih
Originally, btcoex controls the antenna of combo card, but solo card is also needed to setup properly. The new ops are named with suffix '_wifi_only' opposited to original btc_ops, and new structures and definitions are also introduced. The wifi_only oly contains four ops that are initial variable, hw config, scan notify, and switch band notify. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: add scan_notify within ips_notify if RFONPing-Ke Shih
Three steps of connection procedure are scan, enter/leave IPS, auth. There is no scan between leaving IPS and sending auth, but btcoex use scan as an important clue that indicates user is going to connect. So add scan notifications in ips_notify to correct btcoex's state. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: Add variable ant_div_cfg to support antenna diversityPing-Ke Shih
The variable will be used by btcoex of 8822be, so we prepare this variable in advance. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: Add switch band notify for btcPing-Ke Shih
BT shares 2.4G band but not 5G band, so inform current band to btcoex to setup antenna properly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: extend get_wifi_bw to support bandwidth 80MPing-Ke Shih
The rtlwifi newer ICs support 80M bandwidth in 5G band, so extend get_wifi_bw() to know bandwidth 80M that helps btcoex to make correct decisions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-01-24 1) Only offloads SAs after they are fully initialized. Otherwise a NIC may receive packets on a SA we can not yet handle in the stack. From Yossi Kuperman. 2) Fix negative refcount in case of a failing offload. From Aviad Yehezkel. 3) Fix inner IP ptoro version when decapsulating from interaddress family tunnels. From Yossi Kuperman. 4) Use true or false for boolean variables instead of an integer value in xfrm_get_type_offload. From Gustavo A. R. Silva. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24Merge tag 'kvm-s390-master-4.15-3' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux KVM: s390: another fix for cmma migration This fixes races and potential use after free in the cmma migration code.
2018-01-24KVM: s390: diagnoses are instructions as wellChristian Borntraeger
Make the diagnose counters also appear as instruction counters. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2018-01-24mt76x2: init: disable all pending tasklets during device removalLorenzo Bianconi
There is a possible race in mt76x2_stop_hardware() since pre_tbtt and dfs tasklets could run during driver cleanup. Fix it disabling all pending tasklets during device removal Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24s390x/mm: simplify gmap_protect_rmap()David Hildenbrand
We never call it with anything but PROT_READ. This is a left over from an old prototype. For creation of shadow page tables, we always only have to protect the original table in guest memory from write accesses, so we can properly invalidate the shadow on writes. Other protections are not needed. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180123212618.32611-1-david@redhat.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params()Lorenzo Bianconi
Do not enable DFS state machine if dfs region is set to NL80211_DFS_UNSET Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24mt76x2: dfs: add set_domain handlerLorenzo Bianconi
Add mt76x2_dfs_set_domain routine in order to properly reconfigure pattern detector when DFS domain has been changed Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24mt76x2: dfs: avoid tasklet scheduling during mt76x2_dfs_init_params()Lorenzo Bianconi
Substitute tasklet_kill with tasklet_disable/tasklet_enable in order to guarantee dfs tasklet can not be executed during dfs parameter initialization Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24mt76: fix transmission of encrypted management framesFelix Fietkau
Hardware encryption seems to break encrypted unicast mgmt tx. Unfortunately the hardware TXWI header does not have a bit to indicate that a frame is software encrypted, so sw-encrypted frames need to use a different WCID. For that to work, the CCMP PN needs to be generated in software, which makes things a bit slower, so only do it for keys that also need to tx management frames. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24mt76x2: fix WMM parameter configurationLorenzo Bianconi
Fix hw queue configuration since mt76x2 devices use a reverse queue enumeration respect to mac80211 one: - 0: AC_BE - 1: AC_BK - 2: AC_VI - 3: AC_VO The issue can be reproduced sending two concurrent flow using two separate queues: - VO: 20Mbps UDP traffic - BE: TCP traffic In this scenario the UDP traffic will be blocked by the TCP one. Fix it configuring properly WMM hw queue parameters Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Tested-by: Gaetano Catalli <gaetano.catalli@gmail.com> Signed-off-by: Gaetano Catalli <gaetano.catalli@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24spi: a3700: Remove endianness swapping for full-duplex transfersMaxime Chevallier
Fixes the following sparse warnings : line 767: warning: incorrect type in assignment (different base types) line 767: expected unsigned int [unsigned] [assigned] [usertype] val_out line 767: got restricted __le32 [usertype] <noident> line 776: warning: cast to restricted __le32 This takes advantage of readl/writel to do the endianness reordering, and removes an extra variable in the function. Fixes: f68a7dcb91b7 ("spi: a3700: Add full-duplex support") Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-24spi: a3700: Remove endianness swapping functions when accessing FIFOsMaxime Chevallier
Fixes the following sparse warnings : line 504: warning: incorrect type in assignment (different base types) line 504: expected unsigned int [unsigned] [usertype] val line 504: got restricted __le32 [usertype] <noident> line 527: warning: cast to restricted __le32 This is solved by removing endian-converson functions, since the converted values are going through readl/writel anyway, which take care of the conversion. Fixes: 6fd6fd68c9e2 ("spi: armada-3700: Fix padding when sending not 4-byte aligned data") Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-24KVM: s390: add proper locking for CMMA migration bitmapChristian Borntraeger
Some parts of the cmma migration bitmap is already protected with the kvm->lock (e.g. the migration start). On the other hand the read of the cmma bits is not protected against a concurrent free, neither is the emulation of the ESSA instruction. Let's extend the locking to all related ioctls by using the slots lock for - kvm_s390_vm_start_migration - kvm_s390_vm_stop_migration - kvm_s390_set_cmma_bits - kvm_s390_get_cmma_bits In addition to that, we use synchronize_srcu before freeing the migration structure as all users hold kvm->srcu for read. (e.g. the ESSA handler). Reported-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: stable@vger.kernel.org # 4.13+ Fixes: 190df4a212a7 (KVM: s390: CMMA tracking, ESSA emulation, migration mode) Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2018-01-24MIPS: Loongson fix name confict - MEM_RESERVEDHuacai Chen
MEM_RESERVED is used as a value of enum mem_type in include/linux/ edac.h. This will make failure to build for Loongson in some case: for example with CONFIG_RAS enabled. So here rename MEM_RESERVED to SYSTEM_RAM_RESERVED in Loongson code. Signed-off-by: YunQiang Su <yunqiang.su@imgtec.com> Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17724/ Signed-off-by: James Hogan <jhogan@kernel.org>
2018-01-24KVM: s390: vsie: store guest addresses of satellite blocks in vsie_pageDavid Hildenbrand
This way, the values cannot change, even if another VCPU might try to mess with the nested SCB currently getting executed by another VCPU. We now always use the same gpa for pinning and unpinning a page (for unpinning, it is only relevant to mark the guest page dirty for migration). Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180116171526.12343-3-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24KVM: s390: vsie: use READ_ONCE to access some SCB fieldsDavid Hildenbrand
Another VCPU might try to modify the SCB while we are creating the shadow SCB. In general this is no problem - unless the compiler decides to not load values once, but e.g. twice. For us, this is only relevant when checking/working with such values. E.g. the prefix value, the mso, state of transactional execution and addresses of satellite blocks. E.g. if we blindly forward values (e.g. general purpose registers or execution controls after masking), we don't care. Leaving unpin_blocks() untouched for now, will handle it separately. The worst thing right now that I can see would be a missed prefix un/remap (mso, prefix, tx) or using wrong guest addresses. Nothing critical, but let's try to avoid unpredictable behavior. Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180116171526.12343-2-david@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-01-24mmc: mmci: fix error return code in mmci_probe()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: f9bb304ce855 ("mmc: mmci: Add support for setting pad type via pinctrl") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-24x86/centaur: Mark TSC invariantdavidwang
Centaur CPU has a constant frequency TSC and that TSC does not stop in C-States. But because the corresponding TSC feature flags are not set for that CPU, the TSC is treated as not constant frequency and assumed to stop in C-States, which makes it an unreliable and unusable clock source. Setting those flags tells the kernel that the TSC is usable, so it will select it over HPET. The effect of this is that reading time stamps (from kernel or user space) will be faster and more efficent. Signed-off-by: davidwang <davidwang@zhaoxin.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: qiyuanwang@zhaoxin.com Cc: linux-pm@vger.kernel.org Cc: brucechang@via-alliance.com Cc: cooperyan@zhaoxin.com Cc: benjaminpan@viatech.com Link: https://lkml.kernel.org/r/1516616057-5158-1-git-send-email-davidwang@zhaoxin.com
2018-01-24x86/microcode: Fix again accessing initrd after having been freedBorislav Petkov
Commit 24c2503255d3 ("x86/microcode: Do not access the initrd after it has been freed") fixed attempts to access initrd from the microcode loader after it has been freed. However, a similar KASAN warning was reported (stack trace edited): smpboot: Booting Node 0 Processor 1 APIC 0x11 ================================================================== BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50 Read of size 1 at addr ffff880035ffd000 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.14.8-slack #7 Hardware name: System manufacturer System Product Name/A88X-PLUS, BIOS 3003 03/10/2016 Call Trace: dump_stack print_address_description kasan_report ? find_cpio_data __asan_report_load1_noabort find_cpio_data find_microcode_in_initrd __load_ucode_amd load_ucode_amd_ap load_ucode_ap After some investigation, it turned out that a merge was done using the wrong side to resolve, leading to picking up the previous state, before the 24c2503255d3 fix. Therefore the Fixes tag below contains a merge commit. Revert the mismerge by catching the save_microcode_in_initrd_amd() retval and thus letting the function exit with the last return statement so that initrd_gone can be set to true. Fixes: f26483eaedec ("Merge branch 'x86/urgent' into x86/microcode, to resolve conflicts") Reported-by: <higuita@gmx.net> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=198295 Link: https://lkml.kernel.org/r/20180123104133.918-2-bp@alien8.de
generated by cgit (git 2.34.1) at 2025-09-23 18:51:11 +0000