summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-04Linux 5.9-rc8v5.9-rc8Linus Torvalds
2020-10-04net/core: check length before updating Ethertype in skb_mpls_{push,pop}Guillaume Nault
Openvswitch allows to drop a packet's Ethernet header, therefore skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true and mac_len=0. In that case the pointer passed to skb_mod_eth_type() doesn't point to an Ethernet header and the new Ethertype is written at unexpected locations. Fix this by verifying that mac_len is big enough to contain an Ethernet header. Fixes: fa4e0f8855fc ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions") Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: mvneta: fix double free of txq->bufTom Rix
clang static analysis reports this problem: drivers/net/ethernet/marvell/mvneta.c:3465:2: warning: Attempt to free released memory kfree(txq->buf); ^~~~~~~~~~~~~~~ When mvneta_txq_sw_init() fails to alloc txq->tso_hdrs, it frees without poisoning txq->buf. The error is caught in the mvneta_setup_txqs() caller which handles the error by cleaning up all of the txqs with a call to mvneta_txq_sw_deinit which also frees txq->buf. Since mvneta_txq_sw_deinit is a general cleaner, all of the partial cleaning in mvneta_txq_sw_deinit()'s error handling is not needed. Fixes: 2adb719d74f6 ("net: mvneta: Implement software TSO") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net_sched: check error pointer in tcf_dump_walker()Cong Wang
Although we take RTNL on dump path, it is possible to skip RTNL on insertion path. So the following race condition is possible: rtnl_lock() // no rtnl lock mutex_lock(&idrinfo->lock); // insert ERR_PTR(-EBUSY) mutex_unlock(&idrinfo->lock); tc_dump_action() rtnl_unlock() So we have to skip those temporary -EBUSY entries on dump path too. Reported-and-tested-by: syzbot+b47bc4f247856fb4d9e1@syzkaller.appspotmail.com Fixes: 0fedc63fadf0 ("net_sched: commit action insertions together") Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: team: fix memory leak in __team_options_registerAnant Thazhemadam
The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed. The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2. Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused. This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1). Fixes: 80f7c6683fe0 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04MAINTAINERS: TPM DEVICE DRIVER: Update GITJarkko Sakkinen
Update Git URL to git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd.git Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-10-04media: zoran.rst: place it at the right place this timeMauro Carvalho Chehab
I was too quick moving zoran.rst... it ends that the original patch didn't do the right thing and forgot to update the files that references it. Fix it. Fixes: 6b90346919d4 ("media: zoran: move documentation file to the right place") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-04Merge tag 'v5.9-rc7' into patchworkMauro Carvalho Chehab
Linux 5.9-rc7 * tag 'v5.9-rc7': (683 commits) Linux 5.9-rc7 mm/thp: Split huge pmds/puds if they're pinned when fork() mm: Do early cow for pinned pages during fork() for ptes mm/fork: Pass new vma pointer into copy_page_range() mm: Introduce mm_struct.has_pinned mm: validate pmd after splitting mm: don't rely on system state to detect hot-plug operations mm: replace memmap_context by meminit_context arch/x86/lib/usercopy_64.c: fix __copy_user_flushcache() cache writeback lib/memregion.c: include memregion.h lib/string.c: implement stpcpy mm/migrate: correct thp migration stats mm/gup: fix gup_fast with dynamic page table folding mm: memcontrol: fix missing suffix of workingset_restore mm, THP, swap: fix allocating cluster for swapfile by mistake mm: slab: fix potential double free in ___cache_free Documentation/llvm: Fix clang target examples io_uring: ensure async buffered read-retry is setup properly KVM: SVM: Add a dedicated INVD intercept routine io_uring: don't unconditionally set plug->nowait = true ...
2020-10-04vhost-vdpa: fix page pinning leakage in error pathSi-Wei Liu
Pinned pages are not properly accounted particularly when mapping error occurs on IOTLB update. Clean up dangling pinned pages for the error path. As the inflight pinned pages, specifically for memory region that strides across multiple chunks, would need more than one free page for book keeping and accounting. For simplicity, pin pages for all memory in the IOVA range in one go rather than have multiple pin_user_pages calls to make up the entire region. This way it's easier to track and account the pages already mapped, particularly for clean-up in the error path. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-3-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-04vhost-vdpa: fix vhost_vdpa_map() on error conditionSi-Wei Liu
vhost_vdpa_map() should remove the iotlb entry just added if the corresponding mapping fails to set up properly. Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601701330-16837-2-git-send-email-si-wei.liu@oracle.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-04vhost: Don't call log_access_ok() when using IOTLBGreg Kurz
When the IOTLB device is enabled, the log_guest_addr that is passed by userspace to the VHOST_SET_VRING_ADDR ioctl, and which is then written to vq->log_addr, is a GIOVA. All writes to this address are translated by log_user() to writes to an HVA, and then ultimately logged through the corresponding GPAs in log_write_hva(). No logging will ever occur with vq->log_addr in this case. It is thus wrong to pass vq->log_addr and log_guest_addr to log_access_vq() which assumes they are actual GPAs. Introduce a new vq_log_used_access_ok() helper that only checks accesses to the log for the used structure when there isn't an IOTLB device around. Signed-off-by: Greg Kurz <groug@kaod.org> Link: https://lore.kernel.org/r/160171933385.284610.10189082586063280867.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-04vhost: Use vhost_get_used_size() in vhost_vring_set_addr()Greg Kurz
The open-coded computation of the used size doesn't take the event into account when the VIRTIO_RING_F_EVENT_IDX feature is present. Fix that by using vhost_get_used_size(). Fixes: 8ea8cf89e19a ("vhost: support event index") Cc: stable@vger.kernel.org Signed-off-by: Greg Kurz <groug@kaod.org> Link: https://lore.kernel.org/r/160171932300.284610.11846106312938909461.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-04vhost: Don't call access_ok() when using IOTLBGreg Kurz
When the IOTLB device is enabled, the vring addresses we get from userspace are GIOVAs. It is thus wrong to pass them down to access_ok() which only takes HVAs. Access validation is done at prefetch time with IOTLB. Teach vq_access_ok() about that by moving the (vq->iotlb) check from vhost_vq_access_ok() to vq_access_ok(). This prevents vhost_vring_set_addr() to fail when verifying the accesses. No behavior change for vhost_vq_access_ok(). BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1883084 Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Cc: jasowang@redhat.com CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Greg Kurz <groug@kaod.org> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/160171931213.284610.2052489816407219136.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-03net: typhoon: Fix a typo Typoon --> TyphoonChristophe JAILLET
s/Typoon/Typhoon/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03net: hinic: fix DEVLINK build errorsRandy Dunlap
Fix many (lots deleted here) build errors in hinic by selecting NET_DEVLINK. ld: drivers/net/ethernet/huawei/hinic/hinic_hw_dev.o: in function `mgmt_watchdog_timeout_event_handler': hinic_hw_dev.c:(.text+0x30a): undefined reference to `devlink_health_report' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump': hinic_devlink.c:(.text+0x1c): undefined reference to `devlink_fmsg_u32_pair_put' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump': hinic_devlink.c:(.text+0x126): undefined reference to `devlink_fmsg_binary_pair_put' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_hw_reporter_dump': hinic_devlink.c:(.text+0x1ba): undefined reference to `devlink_fmsg_string_pair_put' ld: hinic_devlink.c:(.text+0x227): undefined reference to `devlink_fmsg_u8_pair_put' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_alloc': hinic_devlink.c:(.text+0xaee): undefined reference to `devlink_alloc' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_free': hinic_devlink.c:(.text+0xb04): undefined reference to `devlink_free' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_register': hinic_devlink.c:(.text+0xb26): undefined reference to `devlink_register' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_unregister': hinic_devlink.c:(.text+0xb46): undefined reference to `devlink_unregister' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_create': hinic_devlink.c:(.text+0xb75): undefined reference to `devlink_health_reporter_create' ld: hinic_devlink.c:(.text+0xb95): undefined reference to `devlink_health_reporter_create' ld: hinic_devlink.c:(.text+0xbac): undefined reference to `devlink_health_reporter_destroy' ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_destroy': Fixes: 51ba902a16e6 ("net-next/hinic: Initialize hw interface") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Bin Luo <luobin9@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com> Cc: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03net: stmmac: Modify configuration method of EEE timersVineetha G. Jaya Kumaran
Ethtool manual stated that the tx-timer is the "the amount of time the device should stay in idle mode prior to asserting its Tx LPI". The previous implementation for "ethtool --set-eee tx-timer" sets the LPI TW timer duration which is not correct. Hence, this patch fixes the "ethtool --set-eee tx-timer" to configure the EEE LPI timer. The LPI TW Timer will be using the defined default value instead of "ethtool --set-eee tx-timer" which follows the EEE LS timer implementation. Changelog V2 *Not removing/modifying the eee_timer. *EEE LPI timer can be configured through ethtool and also the eee_timer module param. *EEE TW Timer will be configured with default value only, not able to be configured through ethtool or module param. This follows the implementation of the EEE LS Timer. Fixes: d765955d2ae0 ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "Two bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF intercept KVM: arm64: Restore missing ISB on nVHE __tlb_switch_to_guest
2020-10-03Merge tag 'for-linus-5.9b-rc8-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "Fix a regression introduced in 5.9-rc3 which caused a system running as fully virtualized guest under Xen to crash when using legacy devices like a floppy" * tag 'for-linus-5.9b-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: don't use chip_data for legacy IRQs
2020-10-03Merge tag 'usb-5.9-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are some small USB and PHY driver fixes for 5.9-rc8 The PHY driver fix resolves an issue found by Dan Carpenter for a memory leak. The USB fixes fall into two groups: - usb gadget fix from Bryan that is a fix for a previous security fix that showed up in in-the-wild testing - usb core driver matching bugfixes. This fixes a bug that has plagued the both the usbip driver and syzbot testing tools this -rc release cycle. All is now working properly so usbip connections will work, and syzbot can get back to fuzzing USB drivers properly. All have been in linux-next for a while with no reported issues" * tag 'usb-5.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usbcore/driver: Accommodate usbip usbcore/driver: Fix incorrect downcast usbcore/driver: Fix specific driver selection Revert "usbip: Implement a match function to fix usbip" USB: gadget: f_ncm: Fix NDP16 datagram validation phy: ti: am654: Fix a leak in serdes_am654_probe()
2020-10-03Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some more driver fixes for i2c" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: npcm7xx: Clear LAST bit after a failed transaction. i2c: cpm: Fix i2c_ram structure i2c: i801: Exclude device from suspend direct complete optimization
2020-10-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A couple more driver quirks, now enabling newer trackpoints from Synaptics for real" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - add nopnp quirk for Acer Aspire 5 A515 Input: trackpoint - enable Synaptics trackpoints
2020-10-03scripts/spelling.txt: fix malformed entryEric Biggers
One of the entries has three fields "mistake||correction||correction" rather than the expected two fields "mistake||correction". Fix it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/20200930234359.255295-1-ebiggers@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03mm/page_alloc: handle a missing case for memalloc_nocma_{save/restore} APIsJoonsoo Kim
memalloc_nocma_{save/restore} APIs can be used to skip page allocation on CMA area, but, there is a missing case and the page on CMA area could be allocated even if APIs are used. This patch handles this case to fix the potential issue. For now, these APIs are used to prevent long-term pinning on the CMA page. When the long-term pinning is requested on the CMA page, it is migrated to the non-CMA page before pinning. This non-CMA page is allocated by using memalloc_nocma_{save/restore} APIs. If APIs doesn't work as intended, the CMA page is allocated and it is pinned for a long time. This long-term pin for the CMA page causes cma_alloc() failure and it could result in wrong behaviour on the device driver who uses the cma_alloc(). Missing case is an allocation from the pcplist. MIGRATE_MOVABLE pcplist could have the pages on CMA area so we need to skip it if ALLOC_CMA isn't specified. Fixes: 8510e69c8efe (mm/page_alloc: fix memalloc_nocma_{save/restore} APIs) Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com> Cc: Mel Gorman <mgorman@techsingularity.net> Link: https://lkml.kernel.org/r/1601429472-12599-1-git-send-email-iamjoonsoo.kim@lge.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03mm, slub: restore initial kmem_cache flagsEric Farman
The routine that applies debug flags to the kmem_cache slabs inadvertantly prevents non-debug flags from being applied to those same objects. That is, if slub_debug=<flag>,<slab> is specified, non-debugged slabs will end up having flags of zero, and the slabs may be unusable. Fix this by including the input flags for non-matching slabs with the contents of slub_debug, so that the caches are created as expected alongside any debugging options that may be requested. With this, we can remove the check for a NULL slub_debug_string, since it's covered by the loop itself. Fixes: e17f1dfba37b ("mm, slub: extend slub_debug syntax for multiple blocks") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Kees Cook <keescook@chromium.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: https://lkml.kernel.org/r/20200930161931.28575-1-farman@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-03x86/events/amd/iommu: Fix sizeof mismatchColin Ian King
An incorrect sizeof is being used, struct attribute ** is not correct, it should be struct attribute *. Note that since ** is the same size as * this is not causing any issues. Improve this fix by using sizeof(*attrs) as this allows us to not even reference the type of the pointer. Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)") Fixes: 51686546304f ("x86/events/amd/iommu: Fix sysfs perf attribute groups") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201001113900.58889-1-colin.king@canonical.com
2020-10-03perf/x86/intel: Check perf metrics feature for each CPUKan Liang
It might be possible that different CPUs have different CPU metrics on a platform. In this case, writing the GLOBAL_CTRL_EN_PERF_METRICS bit to the GLOBAL_CTRL register of a CPU, which doesn't support the TopDown perf metrics feature, causes MSR access error. Current TopDown perf metrics feature is enumerated using the boot CPU's PERF_CAPABILITIES MSR. The MSR only indicates the boot CPU supports this feature. Check the PERF_CAPABILITIES MSR for each CPU. If any CPU doesn't support the perf metrics feature, disable the feature globally. Fixes: 59a854e2f3b9 ("perf/x86/intel: Support TopDown metrics on Ice Lake") Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201001211711.25708-1-kan.liang@linux.intel.com
2020-10-03sched/deadline: Unthrottle PI boosted threads while enqueuingDaniel Bristot de Oliveira
stress-ng has a test (stress-ng --cyclic) that creates a set of threads under SCHED_DEADLINE with the following parameters: dl_runtime = 10000 (10 us) dl_deadline = 100000 (100 us) dl_period = 100000 (100 us) These parameters are very aggressive. When using a system without HRTICK set, these threads can easily execute longer than the dl_runtime because the throttling happens with 1/HZ resolution. During the main part of the test, the system works just fine because the workload does not try to run over the 10 us. The problem happens at the end of the test, on the exit() path. During exit(), the threads need to do some cleanups that require real-time mutex locks, mainly those related to memory management, resulting in this scenario: Note: locks are rt_mutexes... ------------------------------------------------------------------------ TASK A: TASK B: TASK C: activation activation activation lock(a): OK! lock(b): OK! <overrun runtime> lock(a) -> block (task A owns it) -> self notice/set throttled +--< -> arm replenished timer | switch-out | lock(b) | -> <C prio > B prio> | -> boost TASK B | unlock(a) switch-out | -> handle lock a to B | -> wakeup(B) | -> B is throttled: | -> do not enqueue | switch-out | | +---------------------> replenishment timer -> TASK B is boosted: -> do not enqueue ------------------------------------------------------------------------ BOOM: TASK B is runnable but !enqueued, holding TASK C: the system crashes with hung task C. This problem is avoided by removing the throttle state from the boosted thread while boosting it (by TASK A in the example above), allowing it to be queued and run boosted. The next replenishment will take care of the runtime overrun, pushing the deadline further away. See the "while (dl_se->runtime <= 0)" on replenish_dl_entity() for more information. Reported-by: Mark Simmons <msimmons@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juri Lelli <juri.lelli@redhat.com> Tested-by: Mark Simmons <msimmons@redhat.com> Link: https://lkml.kernel.org/r/5076e003450835ec74e6fa5917d02c4fa41687e6.1600170294.git.bristot@redhat.com
2020-10-03sched/debug: Add new tracepoint to track cpu_capacityVincent Donnefort
rq->cpu_capacity is a key element in several scheduler parts, such as EAS task placement and load balancing. Tracking this value enables testing and/or debugging by a toolkit. Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/1598605249-72651-1-git-send-email-vincent.donnefort@arm.com
2020-10-03sched/fair: Tweak pick_next_entity()Peter Oskolkov
Currently, pick_next_entity(...) has the following structure (simplified): [...] if (last_buddy_ok()) result = last_buddy; if (next_buddy_ok()) result = next_buddy; [...] The intended behavior is to prefer next buddy over last buddy; the current code somewhat obfuscates this, and also wastes cycles checking the last buddy when eventually the next buddy is picked up. So this patch refactors two 'ifs' above into [...] if (next_buddy_ok()) result = next_buddy; else if (last_buddy_ok()) result = last_buddy; [...] Signed-off-by: Peter Oskolkov <posk@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guitttot@linaro.org> Link: https://lkml.kernel.org/r/20200930173532.1069092-1-posk@google.com
2020-10-03Merge tag 'kvmarm-fixes-5.9-3' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/arm64 fixes for 5.9, take #3 - Fix synchronization of VTTBR update on TLB invalidation for nVHE systems
2020-10-03KVM: VMX: update PFEC_MASK/PFEC_MATCH together with PF interceptPaolo Bonzini
The PFEC_MASK and PFEC_MATCH fields in the VMCS reverse the meaning of the #PF intercept bit in the exception bitmap when they do not match. This means that, if PFEC_MASK and/or PFEC_MATCH are set, the hypervisor can get a vmexit for #PF exceptions even when the corresponding bit is clear in the exception bitmap. This is unexpected and is promptly detected by a WARN_ON_ONCE. To fix it, reset PFEC_MASK and PFEC_MATCH when the #PF intercept is disabled (as is common with enable_ept && !allow_smaller_maxphyaddr). Reported-by: Qian Cai <cai@redhat.com>> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-03media: add Zoran cardlistMauro Carvalho Chehab
Now that Zoran was re-added, we need to add its cardlist to the admin guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-03security/keys: remove compat_keyctl_instantiate_key_iovChristoph Hellwig
Now that import_iovec handles compat iovecs, the native version of keyctl_instantiate_key_iov can be used for the compat case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03mm: remove compat_process_vm_{readv,writev}Christoph Hellwig
Now that import_iovec handles compat iovecs, the native syscalls can be used for the compat case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03fs: remove compat_sys_vmspliceChristoph Hellwig
Now that import_iovec handles compat iovecs, the native vmsplice syscall can be used for the compat case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03fs: remove the compat readv/writev syscallsChristoph Hellwig
Now that import_iovec handles compat iovecs, the native readv and writev syscalls can be used for the compat case as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03fs: remove various compat readv/writev helpersChristoph Hellwig
Now that import_iovec handles compat iovecs as well, all the duplicated code in the compat readv/writev helpers is not needed. Remove them and switch the compat syscall handlers to use the native helpers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03iov_iter: transparently handle compat iovecs in import_iovecChristoph Hellwig
Use in compat_syscall to import either native or the compat iovecs, and remove the now superflous compat_import_iovec. This removes the need for special compat logic in most callers, and the remaining ones can still be simplified by using __import_iovec with a bool compat parameter. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-03iov_iter: refactor rw_copy_check_uvector and import_iovecChristoph Hellwig
Split rw_copy_check_uvector into two new helpers with more sensible calling conventions: - iovec_from_user copies a iovec from userspace either into the provided stack buffer if it fits, or allocates a new buffer for it. Returns the actually used iovec. It also verifies that iov_len does fit a signed type, and handles compat iovecs if the compat flag is set. - __import_iovec consolidates the native and compat versions of import_iovec. It calls iovec_from_user, then validates each iovec actually points to user addresses, and ensures the total length doesn't overflow. This has two major implications: - the access_process_vm case loses the total lenght checking, which wasn't required anyway, given that each call receives two iovecs for the local and remote side of the operation, and it verifies the total length on the local side already. - instead of a single loop there now are two loops over the iovecs. Given that the iovecs are cache hot this doesn't make a major difference Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-10-02Merge tag 'mlx5-fixes-2020-09-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux From: Saeed Mahameed <saeedm@nvidia.com> ==================== This series introduces some fixes to mlx5 driver. v1->v2: - Patch #1 Don't return while mutex is held. (Dave) v2->v3: - Drop patch #1, will consider a better approach (Jakub) - use cpu_relax() instead of cond_resched() (Jakub) - while(i--) to reveres a loop (Jakub) - Drop old mellanox email sign-off and change the committer email (Jakub) Please pull and let me know if there is any problem. For -stable v4.15 ('net/mlx5e: Fix VLAN cleanup flow') ('net/mlx5e: Fix VLAN create flow') For -stable v4.16 ('net/mlx5: Fix request_irqs error flow') For -stable v5.4 ('net/mlx5e: Add resiliency in Striding RQ mode for packets larger than MTU') ('net/mlx5: Avoid possible free of command entry while timeout comp handler') For -stable v5.7 ('net/mlx5e: Fix return status when setting unsupported FEC mode') For -stable v5.8 ('net/mlx5e: Fix race condition on nhe->n pointer in neigh update') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02tcp: fix syn cookied MPTCP request socket leakPaolo Abeni
If a syn-cookies request socket don't pass MPTCP-level validation done in syn_recv_sock(), we need to release it immediately, or it will be leaked. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/89 Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use") Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02Merge branch ↵David S. Miller
'Introduce-sendpage_ok-to-detect-misused-sendpage-in-network-related-drivers' Coly Li says: ==================== Introduce sendpage_ok() to detect misused sendpage in network related drivers As Sagi Grimberg suggested, the original fix is refind to a more common inline routine: static inline bool sendpage_ok(struct page *page) { return (!PageSlab(page) && page_count(page) >= 1); } If sendpage_ok() returns true, the checking page can be handled by the concrete zero-copy sendpage method in network layer. The v10 series has 7 patches, fixes a WARN_ONCE() usage from v9 series, - The 1st patch in this series introduces sendpage_ok() in header file include/linux/net.h. - The 2nd patch adds WARN_ONCE() for improper zero-copy send in kernel_sendpage(). - The 3rd patch fixes the page checking issue in nvme-over-tcp driver. - The 4th patch adds page_count check by using sendpage_ok() in do_tcp_sendpages() as Eric Dumazet suggested. - The 5th and 6th patches just replace existing open coded checks with the inline sendpage_ok() routine. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02libceph: use sendpage_ok() in ceph_tcp_sendpage()Coly Li
In libceph, ceph_tcp_sendpage() does the following checks before handle the page by network layer's zero copy sendpage method, if (page_count(page) >= 1 && !PageSlab(page)) This check is exactly what sendpage_ok() does. This patch replace the open coded checks by sendpage_ok() as a code cleanup. Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Jeff Layton <jlayton@kernel.org> Cc: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map()Coly Li
In iscsci driver, iscsi_tcp_segment_map() uses the following code to check whether the page should or not be handled by sendpage: if (!recv && page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg))) The "page_count(sg_page(sg)) >= 1 && !PageSlab(sg_page(sg)" part is to make sure the page can be sent to network layer's zero copy path. This part is exactly what sendpage_ok() does. This patch uses use sendpage_ok() in iscsi_tcp_segment_map() to replace the original open coded checks. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Lee Duncan <lduncan@suse.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: Cong Wang <amwang@redhat.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: Chris Leech <cleech@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage()Coly Li
In _drbd_send_page() a page is checked by following code before sending it by kernel_sendpage(), (page_count(page) < 1) || PageSlab(page) If the check is true, this page won't be send by kernel_sendpage() and handled by sock_no_sendpage(). This kind of check is exactly what macro sendpage_ok() does, which is introduced into include/linux/net.h to solve a similar send page issue in nvme-tcp code. This patch uses macro sendpage_ok() to replace the open coded checks to page type and refcount in _drbd_send_page(), as a code cleanup. Signed-off-by: Coly Li <colyli@suse.de> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02tcp: use sendpage_ok() to detect misused .sendpageColy Li
commit a10674bf2406 ("tcp: detecting the misuse of .sendpage for Slab objects") adds the checks for Slab pages, but the pages don't have page_count are still missing from the check. Network layer's sendpage method is not designed to send page_count 0 pages neither, therefore both PageSlab() and page_count() should be both checked for the sending page. This is exactly what sendpage_ok() does. This patch uses sendpage_ok() in do_tcp_sendpages() to detect misused .sendpage, to make the code more robust. Fixes: a10674bf2406 ("tcp: detecting the misuse of .sendpage for Slab objects") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Cc: Vasily Averin <vvs@virtuozzo.com> Cc: David S. Miller <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage()Coly Li
Currently nvme_tcp_try_send_data() doesn't use kernel_sendpage() to send slab pages. But for pages allocated by __get_free_pages() without __GFP_COMP, which also have refcount as 0, they are still sent by kernel_sendpage() to remote end, this is problematic. The new introduced helper sendpage_ok() checks both PageSlab tag and page_count counter, and returns true if the checking page is OK to be sent by kernel_sendpage(). This patch fixes the page checking issue of nvme_tcp_try_send_data() with sendpage_ok(). If sendpage_ok() returns true, send this page by kernel_sendpage(), otherwise use sock_no_sendpage to handle this page. Signed-off-by: Coly Li <colyli@suse.de> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Vlastimil Babka <vbabka@suse.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02net: add WARN_ONCE in kernel_sendpage() for improper zero-copy sendColy Li
If a page sent into kernel_sendpage() is a slab page or it doesn't have ref_count, this page is improper to send by the zero copy sendpage() method. Otherwise such page might be unexpected released in network code path and causes impredictable panic due to kernel memory management data structure corruption. This path adds a WARN_ON() on the sending page before sends it into the concrete zero-copy sendpage() method, if the page is improper for the zero-copy sendpage() method, a warning message can be observed before the consequential unpredictable kernel panic. This patch does not change existing kernel_sendpage() behavior for the improper page zero-copy send, it just provides hint warning message for following potential panic due the kernel memory heap corruption. Signed-off-by: Coly Li <colyli@suse.de> Cc: Cong Wang <amwang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: David S. Miller <davem@davemloft.net> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02net: introduce helper sendpage_ok() in include/linux/net.hColy Li
The original problem was from nvme-over-tcp code, who mistakenly uses kernel_sendpage() to send pages allocated by __get_free_pages() without __GFP_COMP flag. Such pages don't have refcount (page_count is 0) on tail pages, sending them by kernel_sendpage() may trigger a kernel panic from a corrupted kernel heap, because these pages are incorrectly freed in network stack as page_count 0 pages. This patch introduces a helper sendpage_ok(), it returns true if the checking page, - is not slab page: PageSlab(page) is false. - has page refcount: page_count(page) is not zero All drivers who want to send page to remote end by kernel_sendpage() may use this helper to check whether the page is OK. If the helper does not return true, the driver should try other non sendpage method (e.g. sock_no_sendpage()) to handle the page. Signed-off-by: Coly Li <colyli@suse.de> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Jan Kara <jack@suse.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mikhail Skorzhinskii <mskorzhinskiy@solarflare.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Vlastimil Babka <vbabka@suse.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-02net: usb: pegasus: Proper error handing when setting pegasus' MAC addressPetko Manolov
v2: If reading the MAC address from eeprom fail don't throw an error, use randomly generated MAC instead. Either way the adapter will soldier on and the return type of set_ethernet_addr() can be reverted to void. v1: Fix a bug in set_ethernet_addr() which does not take into account possible errors (or partial reads) returned by its helpers. This can potentially lead to writing random data into device's MAC address registers. Signed-off-by: Petko Manolov <petko.manolov@konsulko.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 23:32:05 +0000