| Age | Commit message (Collapse) | Author |
|---|
|
Pull rdma fixes from Jason Gunthorpe:
"Four small fixes for crashes:
- Double free in rxe
- UAF in irdma from early freeing the rf
- Off by one undoing the IRQ allocations during error unwind in irdma
- Another race with device rename and uevent generation. uevents
accesses the struct device name and UAF when it is changed"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Fix "KASAN: slab-use-after-free Read in ib_register_device" problem
ice, irdma: fix an off by one in error handling code
irdma: free iwdev->rf after removing MSI-X
RDMA/rxe: Fix slab-use-after-free Read in rxe_queue_cleanup bug
|
|
When nr_hw_queues is updated, the elevator needs to be switched to
ensure that we exit elevator and reattach it to ensure that hctx->
sched_tags is correctly allocated for the new hardware queues.
However, elv_update_nr_hw_queues() currently only switches the
elevator if the queue is not registered. This is incorrect, as it
prevents reattaching the elevator after updating nr_hw_queues, which
in turn inhibits allocation of sched_tags.
Fix this by allowing the elevator switch if the queue is registered,
ensuring proper reattachment and resource allocation.
Fixes: 596dce110b7d ("block: simplify elevator reattachment for updating nr_hw_queues")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250515134511.548270-1-nilay@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"This fixes a KUnit issue, simplifies code, and adds new tests"
* tag 'landlock-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Improve bit operations in audit code
landlock: Remove KUnit test that triggers a warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix a few potential memory leaks in the wacom driver (Qasim Ijaz)
- AMD SFH fixes when there is only one SRA sensor (Mario Limonciello)
- HID-BPF dispatch UAF fix that happens on removal of the Logitech DJ
receiver (Rong Zhang)
- various minor fixes and usual device ID additions
* tag 'hid-for-linus-2025051501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: abort dispatch if device destroyed
HID: quirks: Add ADATA XPG alpha wireless mouse support
HID: hid-steam: Remove the unused variable connected
HID: amd_sfh: Avoid clearing reports for SRA sensor
HID: amd_sfh: Fix SRA sensor when it's the only sensor
HID: wacom: fix shift OOB in kfifo allocation for zero pktlen
HID: uclogic: Add NULL check in uclogic_input_configured()
HID: wacom: fix memory leak on size mismatch in wacom_wac_queue_flush()
HID: wacom: handle kzalloc() allocation failure in wacom_wac_queue_flush()
HID: thrustmaster: fix memory leak in thrustmaster_interrupts()
HID: hid-appletb-kbd: Fix wrong date and kernel version in sysfs interface docs
HID: bpf: fix BTN_STYLUS for the XP Pen ACK05 remote
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
|
|
Use skb_pull() and skb_pull_data() to safely parse QCA dump packets.
This avoids direct pointer math on skb->data, which could lead to
invalid access if the packet is shorter than expected.
Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_check_enc_key_size shall check the security level of the
l2cap_chan rather than the hci_conn since for incoming connection
request that may be different as hci_conn may already been
encrypted using a different security level.
Fixes: 522e9ed157e3 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Commit:
f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and
ublk_cancel_cmd")
adds a request state check in ublk_cancel_cmd(), and if the request is
started, skips canceling this uring_cmd.
However, the current uring_cmd may be in ACTIVE state, without block
request coming to the uring command. Meantime, if the cached request in
tag_set.tags[tag] has been delivered to ublk server and reycycled, then
this uring_cmd can't be canceled.
ublk requests are aborted in ublk char device release handler, which
depends on canceling all ACTIVE uring_cmd. So it causes a dead loop.
Fix this issue by not taking a stale request into account when canceling
uring_cmd in ublk_cancel_cmd().
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Closes: https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/
Fixes: f40139fde527 ("ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250515162601.77346-1-ming.lei@redhat.com
[axboe: rewording of commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We have two variables to track return values, ret and ret2, with types
vm_fault_t (an unsigned int type) and int, which makes it a bit confusing
and harder to keep track. So use a single variable, of type int, and under
the 'out' label return vmf_error(ret) in case ret contains an error,
otherwise return VM_FAULT_NOPAGE. This is equivalent to what we had before
and it's simpler.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If the call to btrfs_set_extent_delalloc() fails we are always returning
VM_FAULT_SIGBUS, which is odd since the error means "bad access" and the
most likely cause for btrfs_set_extent_delalloc() is -ENOMEM, which should
be translated to VM_FAULT_OOM.
Instead of returning VM_FAULT_SIGBUS return vmf_error(ret2), which gives
us a more appropriate return value, and we use that everywhere else too.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have this entangled error checks early at btrfs_page_mkwrite():
1) Try to reserve delalloc space by calling btrfs_delalloc_reserve_space()
and storing the return value in the ret2 variable;
2) If the reservation succeed, call file_update_time() and store the
return value in ret2 and also set the local variable 'reserved' to
true (1);
3) Then do an error check on ret2 to see if any of the previous calls
failed and if so, jump either to the 'out' label or to the
'out_noreserve' label, depending on whether 'reserved' is true or
not.
This is unnecessarily complex. Instead change this to a simpler and
more straightforward approach:
1) Call btrfs_delalloc_reserve_space(), if that returns an error jump to
the 'out_noreserve' label;
2) The call file_update_time() and if that returns an error jump to the
'out' label.
Like this there's less nested if statements, no need to use a local
variable to track if space was reserved and if statements are used only
to check errors.
Also move the call to extent_changeset_free() out of the 'out_noreserve'
label and under the 'out' label since the changeset is allocated only if
the call to reserve delalloc space succeeded.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the last call to btrfs_delalloc_release_space() where the value of the
variable 'ret' is never zero, we pass the expression 'ret != 0' as the
value for the argument 'qgroup_free', which always evaluates to true.
Make this less confusing and more clear by explicitly passing true
instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we're doing a mmap write against a folio that has i_size somewhere in
the middle and we have multiple sectors in the folio, we may have to
release excess space previously reserved, for the range going from the
rounded up (to sector size) i_size to the folio's end offset. We are
calculating the right amount to release and passing it to
btrfs_delalloc_release_space(), but we are passing the wrong start offset
of that range - we're passing the folio's start offset instead of the
end offset, plus 1, of the range for which we keep the reservation. This
may result in releasing more space then we should and eventually trigger
an underflow of the data space_info's bytes_may_use counter.
So fix this by passing the start offset as 'end + 1' instead of
'page_start' to btrfs_delalloc_release_space().
Fixes: d0b7da88f640 ("Btrfs: btrfs_page_mkwrite: Reserve space in sectorsized units")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In order to let all the APIs under <cpuid/api.h> have a shared "cpuid_"
namespace, rename have_cpuid_p() to cpuid_feature().
Adjust all call-sites accordingly.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-4-darwi@linutronix.de
|
|
The main CPUID header <asm/cpuid.h> was originally a storefront for the
headers:
<asm/cpuid/api.h>
<asm/cpuid/leaf_0x2_api.h>
Now that the latter CPUID(0x2) header has been merged into the former,
there is no practical difference between <asm/cpuid.h> and
<asm/cpuid/api.h>.
Migrate all users to the <asm/cpuid/api.h> header, in preparation of
the removal of <asm/cpuid.h>.
Don't remove <asm/cpuid.h> just yet, in case some new code in -next
started using it.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-3-darwi@linutronix.de
|
|
Move all of the CPUID(0x2) APIs at <cpuid/leaf_0x2_api.h> into
<cpuid/api.h>, in order centralize all CPUID APIs into the latter.
While at it, separate the different CPUID leaf parsing APIs using
header comments like "CPUID(0xN) parsing: ".
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250508150240.172915-2-darwi@linutronix.de
|
|
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit.
Fixes: 722e42e45c2f1 ("perf/x86: Support counter mask")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250508134452.73960-1-adrian.hunter@intel.com
|
|
perf always allocates contiguous AUX pages based on aux_watermark.
However, this contiguous allocation doesn't benefit all PMUs. For
instance, ARM SPE and TRBE operate with virtual pages, and Coresight
ETR allocates a separate buffer. For these PMUs, allocating contiguous
AUX pages unnecessarily exacerbates memory fragmentation. This
fragmentation can prevent their use on long-running devices.
This patch modifies the perf driver to be memory-friendly by default,
by allocating non-contiguous AUX pages. For PMUs requiring contiguous
pages (Intel BTS and some Intel PT), the existing
PERF_PMU_CAP_AUX_NO_SG capability can be used. For PMUs that don't
require but can benefit from contiguous pages (some Intel PT), a new
capability, PERF_PMU_CAP_AUX_PREFER_LARGE, is added to maintain their
existing behavior.
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20250508232642.148767-1-yabinc@google.com
|
|
Add a simple rdmsrl_on_cpu() compatibility wrapper for
rdmsrq_on_cpu(), to make life in -next easier, where
the PM tree recently grew more uses of the old API.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Xin Li <xin@zytor.com>
Link: https://lore.kernel.org/r/20250512145517.6e0666e3@canb.auug.org.au
|
|
The chained interrupt handler setup installs the handler and handler data
with two function call.s
irq_set_chained_handler_and_data() can set both in one operation. Replace
the two calls with one.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250515083450.3811411-1-nichen@iscas.ac.cn
|
|
Kernel panic occurs when a devmem TCP socket is closed after NIC module
is unloaded.
This is Devmem TCP unregistration scenarios. number is an order.
(a)netlink socket close (b)pp destroy (c)uninstall result
1 2 3 OK
1 3 2 (d)Impossible
2 1 3 OK
3 1 2 (e)Kernel panic
2 3 1 (d)Impossible
3 2 1 (d)Impossible
(a) netdev_nl_sock_priv_destroy() is called when devmem TCP socket is
closed.
(b) page_pool_destroy() is called when the interface is down.
(c) mp_ops->uninstall() is called when an interface is unregistered.
(d) There is no scenario in mp_ops->uninstall() is called before
page_pool_destroy().
Because unregister_netdevice_many_notify() closes interfaces first
and then calls mp_ops->uninstall().
(e) netdev_nl_sock_priv_destroy() accesses struct net_device to acquire
netdev_lock().
But if the interface module has already been removed, net_device
pointer is invalid, so it causes kernel panic.
In summary, there are only 3 possible scenarios.
A. sk close -> pp destroy -> uninstall.
B. pp destroy -> sk close -> uninstall.
C. pp destroy -> uninstall -> sk close.
Case C is a kernel panic scenario.
In order to fix this problem, It makes mp_dmabuf_devmem_uninstall() set
binding->dev to NULL.
It indicates an bound net_device was unregistered.
It makes netdev_nl_sock_priv_destroy() do not acquire netdev_lock()
if binding->dev is NULL.
A new binding->lock is added to protect a dev of a binding.
So, lock ordering is like below.
priv->lock
netdev_lock(dev)
binding->lock
Tests:
Scenario A:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
kill $pid
ip link set $interface down
modprobe -rv $module
Scenario B:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
ip link set $interface down
kill $pid
modprobe -rv $module
Scenario C:
./ncdevmem -s 192.168.1.4 -c 192.168.1.2 -f $interface -l -p 8000 \
-v 7 -t 1 -q 1 &
pid=$!
sleep 10
modprobe -rv $module
sleep 5
kill $pid
Splat looks like:
Oops: general protection fault, probably for non-canonical address 0xdffffc001fffa9f7: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
KASAN: probably user-memory-access in range [0x00000000fffd4fb8-0x00000000fffd4fbf]
CPU: 0 UID: 0 PID: 2041 Comm: ncdevmem Tainted: G B W 6.15.0-rc1+ #2 PREEMPT(undef) 0947ec89efa0fd68838b78e36aa1617e97ff5d7f
Tainted: [B]=BAD_PAGE, [W]=WARN
RIP: 0010:__mutex_lock (./include/linux/sched.h:2244 kernel/locking/mutex.c:400 kernel/locking/mutex.c:443 kernel/locking/mutex.c:605 kernel/locking/mutex.c:746)
Code: ea 03 80 3c 02 00 0f 85 4f 13 00 00 49 8b 1e 48 83 e3 f8 74 6a 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 34 48 89 fa 48 c1 ea 03 <0f> b6 f
RSP: 0018:ffff88826f7ef730 EFLAGS: 00010203
RAX: dffffc0000000000 RBX: 00000000fffd4f88 RCX: ffffffffaa9bc811
RDX: 000000001fffa9f7 RSI: 0000000000000008 RDI: 00000000fffd4fbc
RBP: ffff88826f7ef8b0 R08: 0000000000000000 R09: ffffed103e6aa1a4
R10: 0000000000000007 R11: ffff88826f7ef442 R12: fffffbfff669f65e
R13: ffff88812a830040 R14: ffff8881f3550d20 R15: 00000000fffd4f88
FS: 0000000000000000(0000) GS:ffff888866c05000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000563bed0cb288 CR3: 00000001a7c98000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<TASK>
...
netdev_nl_sock_priv_destroy (net/core/netdev-genl.c:953 (discriminator 3))
genl_release (net/netlink/genetlink.c:653 net/netlink/genetlink.c:694 net/netlink/genetlink.c:705)
...
netlink_release (net/netlink/af_netlink.c:737)
...
__sock_release (net/socket.c:647)
sock_close (net/socket.c:1393)
Fixes: 1d22d3060b9b ("net: drop rtnl_lock for queue_mgmt operations")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250514154028.1062909-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
So 'make W=1' complains about a couple of kernel-doc descriptions
in our MM primitives in pgtable.c:
arch/x86/mm/pgtable.c:623: warning: Function parameter or struct member 'reserve' not described in 'reserve_top_address'
arch/x86/mm/pgtable.c:672: warning: Function parameter or struct member 'p4d' not described in 'p4d_set_huge'
arch/x86/mm/pgtable.c:672: warning: Function parameter or struct member 'addr' not described in 'p4d_set_huge'
... so on
Fix them all up, add missing parameter documentation, and fix various spelling
inconsistencies while at it.
[ mingo: Harmonize kernel-doc annotations some more. ]
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250514062637.3287779-1-shivankg@amd.com
|
|
This driver is susceptible to a form of the bug explained in commit
c26a2c2ddc01 ("gianfar: Fix TX timestamping with a stacked DSA driver")
and in Documentation/networking/timestamping.rst section "Other caveats
for MAC drivers", specifically it timestamps any skb which has
SKBTX_HW_TSTAMP, and does not consider if timestamping has been enabled
in adapter->hwtstamp_config.tx_type.
Evaluate the proper TX timestamping condition only once on the TX
path (in tsnep_xmit_frame_ring()) and store the result in an additional
TX entry flag. Evaluate the new TX entry flag in the TX confirmation path
(in tsnep_tx_poll()).
This way SKBTX_IN_PROGRESS is set by the driver as required, but never
evaluated. SKBTX_IN_PROGRESS shall not be evaluated as it can be set
by a stacked DSA driver and evaluating it would lead to unwanted
timestamps.
Fixes: 403f69bbdbad ("tsnep: Add TSN endpoint Ethernet MAC driver")
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250514195657.25874-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Affinity-managed interrupts can be shut down and restarted during CPU
hotunplug/plug. Thereby the interrupt may be left in an unexpected state.
Specifically:
1. Interrupt is affine to CPU N
2. disable_irq() -> depth is 1
3. CPU N goes offline
4. irq_shutdown() -> depth is set to 1 (again)
5. CPU N goes online
6. irq_startup() -> depth is set to 0 (BUG! driver expects that the interrupt
still disabled)
7. enable_irq() -> depth underflow / unbalanced enable_irq() warning
This is only a problem for managed interrupts and CPU hotplug, all other
cases like request()/free()/request() truly needs to reset a possibly stale
disable depth value.
Provide a startup function, which takes the disable depth into account, and
invoked it for the managed interrupts in the CPU hotplug path.
This requires to change irq_shutdown() to do a depth increment instead of
setting it to 1, which allows to retain the disable depth, but is harmless
for the other code paths using irq_startup(), which will still reset the
disable depth unconditionally to keep the original correct behaviour.
A kunit tests will be added separately to cover some of these aspects.
[ tglx: Massaged changelog ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250514201353.3481400-2-briannorris@chromium.org
|
|
We cannot set frag_list to NULL pointer when alloc_page failed.
It will be used in tls_strp_check_queue_ok when the next time
tls_strp_read_sock is called.
This is because we don't reset full_len in tls_strp_flush_anchor_copy()
so the recv path will try to continue handling the partial record
on the next call but we dettached the rcvq from the frag list.
Alternative fix would be to reset full_len.
Unable to handle kernel NULL pointer dereference
at virtual address 0000000000000028
Call trace:
tls_strp_check_rcv+0x128/0x27c
tls_strp_data_ready+0x34/0x44
tls_data_ready+0x3c/0x1f0
tcp_data_ready+0x9c/0xe4
tcp_data_queue+0xf6c/0x12d0
tcp_rcv_established+0x52c/0x798
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Pengtao He <hept.hept.hept@gmail.com>
Link: https://patch.msgid.link/20250514132013.17274-1-hept.hept.hept@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
GCC is not happy about a sprintf() call on a buffer that might be too small
for the given formatting string.
kernel/irq/debugfs.c:233:26: warning: 'sprintf' may write a terminating nul past the end of the destination [-Wformat-overflow=]
Fix this by bumping the size of the local variable for sprintf().
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250515085516.2913290-1-andriy.shevchenko@linux.intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202505151057.xbyXAbEn-lkp@intel.com/
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of stragglers:
- mac80211: fix syzbot/ubsan in scan counted-by
- mt76: fix NAPI handling on driver remove
- mt67: fix multicast/ipv6 receive
* tag 'wireless-2025-05-15' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
====================
Link: https://patch.msgid.link/20250515121749.61912-4-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On multi-node GICv4.1 system, VSGI senders always use one certain 4_1 ITS,
because find_4_1_its() returns the first its_node in the list, regardless of
which node the VSGI sender is on. This brings guest VSGI performance drop
when VM is not running on the same node as this returned ITS.
On a 2-socket environment, each with one ITS and 32 cpu, GICv4.1 enabled,
4U8G guest, 4 vcpu is running on same socket.
When the VM is on socket0, kvm-unit-tests ipi_hw result is 850ns.
When the VM is on socket1, it is 750ns.
The reason is that the VSGI sender always uses the last reported ITS (that
on socket1) to inject VSGI. The access from a CPU to a other-socket ITS
will cost 100ns more compared to an access to the local ITS.
Using the local ITS results in a 12% reduction in IPI latency.
Modify find_4_1_its() to return the first per-CPU local_4_1_its, which is
initialized when the VPE table is inherited from the ITS or from another
CPU. If it fails to find a local 4_1 ITS, it returns any 4_1 ITS like
before.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250515145359.2795959-1-tangnianyao@huawei.com
|
|
Error recovery, PCIe AER, resume, and TX timeout will invoke bnxt_open()
with netdev_lock only. This will cause RTNL assert failure in
netif_set_real_num_tx_queues(), netif_set_real_num_tx_queues(),
and netif_set_real_num_tx_queues().
Example error recovery assert:
RTNL: assertion failed at net/core/dev.c (3178)
WARNING: CPU: 3 PID: 3392 at net/core/dev.c:3178 netif_set_real_num_tx_queues+0x1fd/0x210
Call Trace:
<TASK>
? __pfx_bnxt_msix+0x10/0x10 [bnxt_en]
__bnxt_open_nic+0x1ef/0xb20 [bnxt_en]
bnxt_open+0xda/0x130 [bnxt_en]
bnxt_fw_reset_task+0x21f/0x780 [bnxt_en]
process_scheduled_works+0x9d/0x400
For now, bring back rtnl_lock() in all these code paths that can invoke
bnxt_open(). In the bnxt_queue_start() error path, we don't have
rtnl_lock held so we just change it to call netif_close() instead of
bnxt_reset_task() for simplicity. This error path is unlikely so it
should be fine.
Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250514062908.2766677-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver only offloads neighbors that are constructed on top of net
devices registered by it or their uppers (which are all Ethernet). The
device supports GRE encapsulation and decapsulation of forwarded
traffic, but the driver will not offload dummy neighbors constructed on
top of GRE net devices as they are not uppers of its net devices:
# ip link add name gre1 up type gre tos inherit local 192.0.2.1 remote 198.51.100.1
# ip neigh add 0.0.0.0 lladdr 0.0.0.0 nud noarp dev gre1
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 NOARP
(Note that the neighbor is not marked with 'offload')
When the driver is reloaded and the existing configuration is replayed,
the driver does not perform the same check regarding existing neighbors
and offloads the previously added one:
# devlink dev reload pci/0000:01:00.0
$ ip neigh show dev gre1 nud noarp
0.0.0.0 lladdr 0.0.0.0 offload NOARP
If the neighbor is later deleted, the driver will ignore the
notification (given the GRE net device is not its upper) and will
therefore keep referencing freed memory, resulting in a use-after-free
[1] when the net device is deleted:
# ip neigh del 0.0.0.0 lladdr 0.0.0.0 dev gre1
# ip link del dev gre1
Fix by skipping neighbor replay if the net device for which the replay
is performed is not our upper.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_neigh_entry_update+0x1ea/0x200
Read of size 8 at addr ffff888155b0e420 by task ip/2282
[...]
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xa0
print_address_description.constprop.0+0x6f/0x350
print_report+0x108/0x205
kasan_report+0xdf/0x110
mlxsw_sp_neigh_entry_update+0x1ea/0x200
mlxsw_sp_router_rif_gone_sync+0x2a8/0x440
mlxsw_sp_rif_destroy+0x1e9/0x750
mlxsw_sp_netdevice_ipip_ol_event+0x3c9/0xdc0
mlxsw_sp_router_netdevice_event+0x3ac/0x15e0
notifier_call_chain+0xca/0x150
call_netdevice_notifiers_info+0x7f/0x100
unregister_netdevice_many_notify+0xc8c/0x1d90
rtnl_dellink+0x34e/0xa50
rtnetlink_rcv_msg+0x6fb/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: 8fdb09a7674c ("mlxsw: spectrum_router: Replay neighbours when RIF is made")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/c53c02c904fde32dad484657be3b1477884e9ad6.1747225701.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When starting the local sync timer to synchronize the state of a remote
CPU it should be added on the CPU to be synchronized, not the initiating
CPU. This results in interrupt delivery being delayed until the timer
eventually runs (due to another mask/unmask/migrate operation) on the
target CPU.
Fixes: 0f67911e821c ("irqchip/riscv-imsic: Separate next and previous pointers in IMSIC vector")
Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/all/20250514171320.3494917-1-abrestic@rivosinc.com
|
|
If blk-throttle is enabled but blktrace is not, then the compiler will
notice that the following two variables are unused:
../block/blk-throttle.c: In function 'throtl_pending_timer_fn':
../block/blk-throttle.c:1153:30: warning: unused variable 'bio_cnt_w' [-Wunused-variable]
1153 | unsigned int bio_cnt_w = sq_queued(sq, WRITE);
| ^~~~~~~~~
../block/blk-throttle.c:1152:30: warning: unused variable 'bio_cnt_r' [-Wunused-variable]
1152 | unsigned int bio_cnt_r = sq_queued(sq, READ);
| ^~~~~~~~~
Silence that my annotating them with __maybe_unused.
Fixes: 28ad83b774a6 ("blk-throttle: Split the service queue")
Link: https://lore.kernel.org/all/20250515130830.9671-1-aishwarya.tcv@arm.com/
Reported-by: Aishwarya <aishwarya.tcv@arm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
refs
When running delayed references we are reading the number of ready delayed
ref heads without taking any lock which can make KCSAN report a race since
we can have concurrent tasks updating that number, such as for example
when freeing a tree block which will end up decrementing that counter or
when adding a new delayed ref while COWing a tree block which will
increment that counter.
This is a harmless race since running one more or one less delayed ref
head doesn't result in any problem, in the critical section of a
transaction commit we always run any remaining delayed refs and at that
point no one can create more.
So fix this harmless race by annotating the read with data_race().
Reported-by: cen zhang <zzzccc427@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAFRLqsUCLMz0hY-GaPj1Z=fhkgRHjxVXHZ8kz0PvkFN0b=8L2Q@mail.gmail.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When writing super blocks, at write_dev_supers(), we log an error message
when we get some error but we don't show which error we got and we have
that information. So enhance the error messages with the error codes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's no need to have special logic to return -EAGAIN in case the call
to __filemap_get_folio() fails, because when FGP_NOWAIT is passed to
__filemap_get_folio() it returns ERR_PTR(-EAGAIN) if it needs to do
something that would imply blocking.
The reason we have this logic is from the days before we migrated to the
folio interface, when we called pagecache_get_page() which would return
NULL instead of an error pointer.
So remove this special casing and always return the error that the call
to __filemap_get_folio() returned.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have a few places that always assume a -ENOMEM error happened in case a
call to __filemap_get_folio() returns an error, which is just too much of
an assumption and even if it would be the case at some point in time, it's
not future proof and there's nothing in the documentation that guarantees
that only ERR_PTR(-ENOMEM) can be returned with the flags we are passing
to it.
So use the exact error returned by __filemap_get_folio() instead.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the if statement that checks the return value from
btrfs_check_data_free_space(), there's no point to check if 'ret' is not
zero in the else branch, since the main if branch checked that it's zero,
so in the else branch it necessarily has a non-zero value.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If when truncating a block we fail to reserve data space and then we
proceed anyway because we can do a NOCOW write, if we later get an error
when trying to get the folio from the inode's mapping, we end up releasing
data space that we haven't reserved, screwing up the bytes_may_use counter
from the data space_info, eventually resulting in an underflow when all
other reservations done by other tasks are released, if any, or right away
if there are no other reservations at the moment.
This is because when we get an error when trying to grab the block's folio
we call btrfs_delalloc_release_space(), which releases metadata (which we
have reserved) and data (which we haven't reserved).
Fix this by calling btrfs_delalloc_release_space() only if we did reserve
data space, that is, if we aren't falling back to NOCOW, meaning the local
variable @only_release_metadata has a false value, otherwise release only
metadata by calling btrfs_delalloc_release_metadata().
Fixes: 6d4572a9d71d ("btrfs: allow btrfs_truncate_block() to fallback to nocow for data space reservation")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Expand what the options do and if they are OK to be enabled.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The list is out of date, the extent shrinker got fixed in 6.13. Add new
entries: the COW fixup warning in 6.15, rund robin policies in 6.14.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are debugging prints for each emitted send command and other
related actions. This does not seem right as the number of commands can
be high and dumping that to the system log will likely hit some rate
limiting. This should be done by trace points that are more lightweight
and can keep up with high frequency.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are using an integer for the 'delalloc' argument but all we need is a
boolean, so switch the type to 'bool' and rename the parameter to
'is_delalloc' to better match the fact that it's a boolean.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We are using an integer for the 'delalloc' argument but all we need is a
boolean, so switch the type to 'bool' and rename the parameter to
'is_delalloc' to better match the fact that it's a boolean.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of having an error check and return on each branch of the if
statement, move the error check to happen after that if branch, reducing
source code and object code sizes.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1840174 163742 16136 2020052 1ed2d4 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1840138 163742 16136 2020016 1ed2b0 fs/btrfs/btrfs.ko
While at it and moving the comments, update the comments to be more clear
about how qgroup reserved space is released and the intricacies of how
it's managed for COW writes.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When allocating an ordered extent we call igrab() to get a reference on
the inode and attach it to the ordered extent. For an ordered extent we
always must have an inode reference since we during its life cycle we
need to access the inode for several things like for example:
* Inserting the ordered extent right after allocating it, when calling
insert_ordered_extent() - we need to lock the inode's ordered_tree_lock;
* In the bio submission path we need to add checksums to the ordered
extent and we end up at btrfs_add_ordered_sum(), where again we need
to grab the inode from the ordered extent to lock the inode's
ordered_tree_lock;
* When finishing an ordered extent, at btrfs_finish_ordered_extent(), we
need again to access its inode in order to lock the inode's
ordered_tree_lock;
* Etc etc etc.
Everywhere we deal with an ordered extent we always expect its inode to
be not NULL, the only exception being btrfs_put_ordered_extent() where
we check if it's NULL before calling btrfs_add_delayed_iput(), even though
we have already assumed it's not NULL when calling the tracepoint
trace_btrfs_ordered_extent_put() since the tracepoint dereferences the
inode to extract its number and root without ever checking it's NULL.
The igrab() call can return NULL if the inode is about to be freed or is
being freed (its state has I_FREEING or I_WILL_FREE set), and that's why
there's such check at btrfs_put_ordered_extent(). The igrab() and NULL
check were introduced in commit 5fd02043553b ("Btrfs: finish ordered
extents in their own thread") but even back then we always needed and
assumed igrab() returned a non-NULL pointer, since for example when
removing an ordered extent, at btrfs_remove_ordered_extent(), we assumed
the inode pointer was not NULL in order to access the inode's ordered
extent tree.
In fact whenever we allocate an ordered extent we are holding an inode
reference and the inode is not being freed or going to be freed (which
happens in the final iput), and since we depend on the inode for the
life cycle of the ordered extent, just make ordered extent allocation
to fail in case igrab() returns NULL and trigger a warning, to make it
clear it's not expected. This allows to remove the confusing NULL inode
check at btrfs_put_ordered_extent().
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we fail to allocate an ordered extent for a COW write we end up leaking
a qgroup data reservation since we called btrfs_qgroup_release_data() but
we didn't call btrfs_qgroup_free_refroot() (which would happen when
running the respective data delayed ref created by ordered extent
completion or when finishing the ordered extent in case an error happened).
So make sure we call btrfs_qgroup_free_refroot() if we fail to allocate an
ordered extent for a COW write.
Fixes: 7dbeaad0af7d ("btrfs: change timing for qgroup reserved space for ordered extents to fix reserved space leak")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
That structure records needed info for block verification (either data
checksum pointer, or expected tree block generation).
But there is also a boolean to tell if this block belongs to a metadata
or not, as the data checksum pointer and expected tree block generation
is already a union, we need a dedicated bit to tell if this block is a
metadata or not.
However such layout means we're wasting 63 bits for x86_64, which is a
huge memory waste.
Thanks to the recent bitmap aggregation, we can easily move this
single-bit-per-block member to a new sub-bitmap.
And since we already have six 16 bits long bitmaps, adding another
bitmap won't even increase any memory usage for x86_64, as we need two
64 bits long anyway.
This will reduce the following memory usages:
- sizeof(struct scrub_sector_verification)
From 16 bytes to 8 bytes on x86_64.
- scrub_stripe::sectors
From 16 * 16 to 16 * 8 bytes.
- Per-device scrub_ctx memory usage
From 128 * (16 * 16) to 128 * (16 * 8), which saves 16KiB memory.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
For the following fsx -e 1 run, the btrfs still fails the run on 64K
page size with 4K fs block size:
READ BAD DATA: offset = 0x26b3a, size = 0xfafa, fname = /mnt/btrfs/junk
OFFSET GOOD BAD RANGE
0x26b3a 0x0000 0x15b4 0x0
operation# (mod 256) for the bad data may be 21
[...]
LOG DUMP (28 total operations):
1( 1 mod 256): SKIPPED (no operation)
2( 2 mod 256): SKIPPED (no operation)
3( 3 mod 256): SKIPPED (no operation)
4( 4 mod 256): SKIPPED (no operation)
5( 5 mod 256): WRITE 0x1ea90 thru 0x285e0 (0x9b51 bytes) HOLE
6( 6 mod 256): ZERO 0x1b1a8 thru 0x20bd4 (0x5a2d bytes)
7( 7 mod 256): FALLOC 0x22b1a thru 0x272fa (0x47e0 bytes) INTERIOR
8( 8 mod 256): WRITE 0x741d thru 0x13522 (0xc106 bytes)
9( 9 mod 256): MAPWRITE 0x73ee thru 0xdeeb (0x6afe bytes)
10( 10 mod 256): FALLOC 0xb719 thru 0xb994 (0x27b bytes) INTERIOR
11( 11 mod 256): COPY 0x15ed8 thru 0x18be1 (0x2d0a bytes) to 0x25f6e thru 0x28c77
12( 12 mod 256): ZERO 0x1615e thru 0x1770e (0x15b1 bytes)
13( 13 mod 256): SKIPPED (no operation)
14( 14 mod 256): DEDUPE 0x20000 thru 0x27fff (0x8000 bytes) to 0x1000 thru 0x8fff
15( 15 mod 256): SKIPPED (no operation)
16( 16 mod 256): CLONE 0xa000 thru 0xffff (0x6000 bytes) to 0x36000 thru 0x3bfff
17( 17 mod 256): ZERO 0x14adc thru 0x1b78a (0x6caf bytes)
18( 18 mod 256): TRUNCATE DOWN from 0x3c000 to 0x1e2e3 ******WWWW
19( 19 mod 256): CLONE 0x4000 thru 0x11fff (0xe000 bytes) to 0x16000 thru 0x23fff
20( 20 mod 256): FALLOC 0x311e1 thru 0x3681b (0x563a bytes) PAST_EOF
21( 21 mod 256): FALLOC 0x351c5 thru 0x40000 (0xae3b bytes) EXTENDING
22( 22 mod 256): WRITE 0x920 thru 0x7e51 (0x7532 bytes)
23( 23 mod 256): COPY 0x2b58 thru 0xc508 (0x99b1 bytes) to 0x117b1 thru 0x1b161
24( 24 mod 256): TRUNCATE DOWN from 0x40000 to 0x3c9a5
25( 25 mod 256): SKIPPED (no operation)
26( 26 mod 256): MAPWRITE 0x25020 thru 0x26b06 (0x1ae7 bytes)
27( 27 mod 256): SKIPPED (no operation)
28( 28 mod 256): READ 0x26b3a thru 0x36633 (0xfafa bytes) ***RRRR***
[CAUSE]
The involved operations are:
fallocating to largest ever: 0x40000
21 pollute_eof 0x24000 thru 0x2ffff (0xc000 bytes)
21 falloc from 0x351c5 to 0x40000 (0xae3b bytes)
28 read 0x26b3a thru 0x36633 (0xfafa bytes)
At operation #21 a pollute_eof is done, by memory mapped write into
range [0x24000, 0x2ffff).
At this stage, the inode size is 0x24000, which is block aligned.
Then fallocate happens, and since it's expanding the inode, it will call
btrfs_truncate_block() to truncate any unaligned range.
But since the inode size is already block aligned,
btrfs_truncate_block() does nothing and exits.
However remember the folio at 0x20000 has some range polluted already,
although it will not be written back to disk, it still affects the
page cache, resulting the later operation #28 to read out the polluted
value.
[FIX]
Instead of early exit from btrfs_truncate_block() if the range is
already block aligned, do extra filio zeroing if the fs block size is
smaller than the page size and we're truncating beyond EOF.
This is to address exactly the above case where memory mapped write can
still leave some garbage beyond EOF.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
The following fsx sequence will fail on btrfs with 64K page size and 4K
fs block size:
#fsx -d -e 1 -N 4 $mnt/junk -S 36386
READ BAD DATA: offset = 0xe9ba, size = 0x6dd5, fname = /mnt/btrfs/junk
OFFSET GOOD BAD RANGE
0xe9ba 0x0000 0x03ac 0x0
operation# (mod 256) for the bad data may be 3
...
LOG DUMP (4 total operations):
1( 1 mod 256): WRITE 0x6c62 thru 0x1147d (0xa81c bytes) HOLE ***WWWW
2( 2 mod 256): TRUNCATE DOWN from 0x1147e to 0x5448 ******WWWW
3( 3 mod 256): ZERO 0x1c7aa thru 0x28fe2 (0xc839 bytes)
4( 4 mod 256): MAPREAD 0xe9ba thru 0x1578e (0x6dd5 bytes) ***RRRR***
[CAUSE]
Only 2 operations are really involved in this case:
3 pollute_eof 0x5448 thru 0xffff (0xabb8 bytes)
3 zero from 0x1c7aa to 0x28fe3, (0xc839 bytes)
4 mapread 0xe9ba thru 0x1578e (0x6dd5 bytes)
At operation 3, fsx pollutes beyond EOF, that is done by mmap()
and write into that mmap() range beyond EOF.
Such write will fill the range beyond EOF, but it will never reach disk
as ranges beyond EOF will not be marked dirty nor uptodate.
Then we zero_range for [0x1c7aa, 0x28fe3], and since the range is beyond
our isize (which was 0x5448), we should zero out any range beyond
EOF (0x5448).
During btrfs_zero_range(), we call btrfs_truncate_block() to dirty the
unaligned head block.
But that function only really zeroes out the block at [0x5000, 0x5fff], it
doesn't bother any range other that that block, since those ranges will
not be marked dirty nor written back.
So the range [0x6000, 0xffff] is still polluted, and later mapread()
will return the poisoned value.
[FIX]
Enhance btrfs_truncate_block() by:
- Pass a @start/@end pair to indicate the full truncation range
This is to handle the following truncation case:
Page size is 64K, fs block size is 4K, truncate range is
[6K, 60K]
0 32K 64K
| |///////////////////////////////////| |
6K 60K
The range is not aligned for its head block, so we need to call
btrfs_truncate_block() with @from = 6K, @front = 0, @len = 0.
But with that information we only know to zero the range [6K, 8K),
if we zero out the range [6K, 64K), the last block will also be
zeroed, causing data loss.
So here we need the full range we're truncating, so that we can avoid
over-truncation.
- Rename @from to @offset
As now the parameter is only utilized to locate a block, it's not
really carrying the old @from meaning well.
- Remove @front parameter
With the full truncate range passed in, we can determine if the
@offset is at the head or tail block.
- Skip truncation if @offset is not in the head nor tail blocks
The call site in hole punch unconditionally call
btrfs_truncate_block() without even checking the range is aligned or
not.
If the @offset is neither in the head nor in tail block, it means we can
safely ignore it.
- Skip truncate if the range inside the target block is already aligned
- Make btrfs_truncate_block() zero all blocks beyond EOF
Since we have the original range, we know exactly if we're doing
truncation beyond EOF (the @end will be (u64)-1).
If we're doing truncation beyond EOF, then enlarge the truncation
range to the folio end, to address the possibly polluted ranges.
Otherwise still keep the zero range inside the block, as we can have
large data folios soon, always truncating every blocks inside the same
folio can be costly for large folios.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The (correct) commit e41c81d0d30e ("mm/truncate: Replace page_mapped()
call in invalidate_inode_page()") replaced the page_mapped(page) check
with a refcount check. However, this refcount check does not work as
expected with drop_caches for btrfs's metadata pages.
Btrfs has a per-sb metadata inode with cached pages, and when not in
active use by btrfs, they have a refcount of 3. One from the initial
call to alloc_pages(), one (nr_pages == 1) from filemap_add_folio(), and
one from folio_attach_private(). We would expect such pages to get dropped
by drop_caches. However, drop_caches calls into mapping_evict_folio() via
mapping_try_invalidate() which gets a reference on the folio with
find_lock_entries(). As a result, these pages have a refcount of 4, and
fail this check.
For what it's worth, such pages do get reclaimed under memory pressure,
so I would say that while this behavior is surprising, it is not really
dangerously broken.
When I asked the mm folks about the expected refcount in this case, I
was told that the correct thing to do is to donate the refcount from the
original allocation to the page cache after inserting it.
Therefore, attempt to fix this by adding a put_folio() to the critical
spot in alloc_extent_buffer() where we are sure that we have really
allocated and attached new pages. We must also adjust
folio_detach_private() to properly handle being the last reference to the
folio and not do a use-after-free after folio_detach_private().
extent_buffers allocated by clone_extent_buffer() and
alloc_dummy_extent_buffer() are unmapped, so this transfer of ownership
from allocation to insertion in the mapping does not apply to them.
However, we can still folio_put() them safely once they are finished
being allocated and have called folio_attach_private().
Finally, removing the generic put_folio() for the allocation from
btrfs_detach_extent_buffer_folios() means we need to be careful to do
the appropriate put_folio() in allocation failure paths in
alloc_extent_buffer(), clone_extent_buffer() and
alloc_dummy_extent_buffer().
Link: https://lore.kernel.org/linux-mm/ZrwhTXKzgDnCK76Z@casper.infradead.org/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Reviewed-by: Daniel Vacek <neelx@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
