summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-03Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C driver bugfixes and a MAINTAINERS update for you" * 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Prevent runtime suspend of adapter when Host Notify is required i2c: synquacer: fix enumeration of slave devices MAINTAINERS: friendly takeover of i2c-gpio driver i2c: designware: ratelimit 'transfer when suspended' errors i2c: imx: correct the method of getting private data in notifier_call
2019-05-03Merge tag 'drm-fixes-2019-05-03' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fix from Dave Airlie: "Just a single qxl revert" * tag 'drm-fixes-2019-05-03' of git://anongit.freedesktop.org/drm/drm: Revert "drm/qxl: drop prime import/export callbacks"
2019-05-03Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for clkdev where we forgot to hold a lock while iterating a list that can change, and finally a build fix that adds some stubs for clk APIs that are used by devfreq drivers on platforms without the clk APIs" * tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Add missing stubs for a few functions clkdev: Hold clocks_mutex while iterating clocks list clk: sunxi-ng: nkmp: Explain why zero width check is needed clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)
2019-05-03Merge tag 'sound-5.1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A few stable fixes at this round. The USB Line6 audio fixes are a bit large, but they are rather trivial and pretty much device-specific, so should be safe to apply at this late stage. Ditto for other HD-audio quirks" * tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR ALSA: line6: use dynamic buffers ALSA: hda/realtek - Fixed Dell AIO speaker noise ALSA: hda/realtek - Add new Dell platform for headset mode
2019-05-03perf/x86/intel/pt: Remove software double buffering PMU capabilityAlexander Shishkin
Now that all AUX allocations are high-order by default, the software double buffering PMU capability doesn't make sense any more, get rid of it. In case some PMUs choose to opt out, we can re-introduce it. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03perf/ring_buffer: Fix AUX software double bufferingAlexander Shishkin
This recent commit: 5768402fd9c6e87 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") overlooked the fact that the previous one page granularity of the AUX buffer provided an implicit double buffering capability to the PMU driver, which went away when the entire buffer became one high-order page. Always make the full-trace mode AUX allocation at least two-part to preserve the previous behavior and allow the implicit double buffering to continue. Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: adrian.hunter@intel.com Fixes: 5768402fd9c6e87 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Link: http://lkml.kernel.org/r/20190503085536.24119-2-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03Merge tag 'perf-urgent-for-mingo-5.1-20190502' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: tools UAPI: Arnaldo Carvalho de Melo: - Sync x86's vmx.h with the kernel. - Copy missing unistd.h headers for arc, hexagon and riscv, fixing a reported build regression on the ARC 32-bit architecture. perf bench numa: Arnaldo Carvalho de Melo: - Add define for RUSAGE_THREAD if not present, fixing the build on the ARC architecture when only zlib and libnuma are present. perf BPF: Arnaldo Carvalho de Melo: - The disassembler-four-args feature test needs -ldl on distros such as Mageia 7. Bo YU: - Fix unlocking on success in perf_env__find_btf(), detected with the coverity tool. libtraceevent: Leo Yan: - Change misleading hard coded 'trace-cmd' string in error messages. ARM hardware tracing: Leo Yan: - Always allocate memory for cs_etm_queue::prev_packet, fixing a segfault when processing CoreSight perf data. perf annotate: Thadeu Lima de Souza Cascardo: - Fix build on 32 bit for BPF. perf report: Thomas Richter: - Report OOM in status line in the GTK UI. core libs: - Remove needless asm/unistd.h that, used with sys/syscall.h ended up redefining the syscalls defines in environments such as the ARC arch when using uClibc. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03Merge tag 'drm-misc-fixes-2019-05-02' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - One revert for QXL for a DRI3 breakage Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190502122529.hguztj3kncaixe3d@flea
2019-05-02perf tools: Remove needless asm/unistd.h include fixing build in some placesArnaldo Carvalho de Melo
We were including sys/syscall.h and asm/unistd.h, since sys/syscall.h includes asm/unistd.h, sometimes this leads to the redefinition of defines, breaking the build. Noticed on ARC with uCLibc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <arnaldo.melo@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-xjpf80o64i2ko74aj2jih0qg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscvArnaldo Carvalho de Melo
Since those were introduced in: c8ce48f06503 ("asm-generic: Make time32 syscall numbers optional") But when the asm-generic/unistd.h was sync'ed with tools/ in: 1a787fc5ba18 ("tools headers uapi: Sync copy of asm-generic/unistd.h with the kernel sources") I forgot to copy the files for the architectures that define __ARCH_WANT_TIME32_SYSCALLS, so the perf build was breaking there, as reported by Vineet Gupta for the ARC architecture. After updating my ARC container to use the glibc based toolchain + cross building libnuma, zlib and elfutils, I finally managed to reproduce the problem and verify that this now is fixed and will not regress as will be tested before each pull req sent upstream. Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> CC: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/r/20190426193531.GC28586@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools build: Add -ldl to the disassembler-four-args feature testArnaldo Carvalho de Melo
Thomas Backlund reported that the perf build was failing on the Mageia 7 distro, that is because it uses: cat /tmp/build/perf/feature/test-disassembler-four-args.make.output /usr/bin/ld: /usr/lib64/libbfd.a(plugin.o): in function `try_load_plugin': /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:243: undefined reference to `dlopen' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:271: undefined reference to `dlsym' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:256: undefined reference to `dlclose' /usr/bin/ld: /home/iurt/rpmbuild/BUILD/binutils-2.32/objs/bfd/../../bfd/plugin.c:246: undefined reference to `dlerror' as we allow dynamic linking and loading Mageia 7 uses these linker flags: $ rpm --eval %ldflags  -Wl,--as-needed -Wl,--no-undefined -Wl,-z,relro -Wl,-O1 -Wl,--build-id -Wl,--enable-new-dtags So add -ldl to this feature LDFLAGS. Reported-by: Thomas Backlund <tmb@mageia.org> Tested-by: Thomas Backlund <tmb@mageia.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lkml.kernel.org/r/20190501173158.GC21436@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf cs-etm: Always allocate memory for cs_etm_queue::prev_packetLeo Yan
Robert Walker reported a segmentation fault is observed when process CoreSight trace data; this issue can be easily reproduced by the command 'perf report --itrace=i1000i' for decoding tracing data. If neither the 'b' flag (synthesize branches events) nor 'l' flag (synthesize last branch entries) are specified to option '--itrace', cs_etm_queue::prev_packet will not been initialised. After merging the code to support exception packets and sample flags, there introduced a number of uses of cs_etm_queue::prev_packet without checking whether it is valid, for these cases any accessing to uninitialised prev_packet will cause crash. As cs_etm_queue::prev_packet is used more widely now and it's already hard to follow which functions have been called in a context where the validity of cs_etm_queue::prev_packet has been checked, this patch always allocates memory for cs_etm_queue::prev_packet. Reported-by: Robert Walker <robert.walker@arm.com> Suggested-by: Robert Walker <robert.walker@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Fixes: 7100b12cf474 ("perf cs-etm: Generate branch sample for exception packet") Fixes: 24fff5eb2b93 ("perf cs-etm: Avoid stale branch samples when flush packet") Link: http://lkml.kernel.org/r/20190428083228.20246-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf cs-etm: Don't check cs_etm_queue::prev_packet validityLeo Yan
Since cs_etm_queue::prev_packet is allocated for all cases, it will never be NULL pointer; now validity checking prev_packet is pointless, remove all of them. Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Robert Walker <robert.walker@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Suzuki K Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190428083228.20246-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf report: Report OOM in status line in the GTK UIThomas Richter
An -ENOMEM error is not reported in the GTK GUI. Instead this error message pops up on the screen: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 Processing events... [974K/3M] Error:failed to process sample 0xf4198 [0x8]: failed to process type: 68 However when I use the same perf.data file with --stdio it works: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 --stdio \ | head -12 # Total Lost Samples: 0 # # Samples: 76K of event 'cycles' # Event count (approx.): 99056160000 # # Overhead Command Shared Object Symbol # ........ ............... ................. ......... # 8.81% find [kernel.kallsyms] [k] ftrace_likely_update 8.74% swapper [kernel.kallsyms] [k] ftrace_likely_update 8.34% sshd [kernel.kallsyms] [k] ftrace_likely_update 2.19% kworker/u512:1- [kernel.kallsyms] [k] ftrace_likely_update The sample precentage is a bit low..... The GUI always fails in the FINISHED_ROUND event (68) and does not indicate the reason why. When happened is the following. Perf report calls a lot of functions and down deep when a FINISHED_ROUND event is processed, these functions are called: perf_session__process_event() + perf_session__process_user_event() + process_finished_round() + ordered_events__flush() + __ordered_events__flush() + do_flush() + ordered_events__deliver_event() + perf_session__deliver_event() + machine__deliver_event() + perf_evlist__deliver_event() + process_sample_event() + hist_entry_iter_add() --> only called in GUI case!!! + hist_iter__report__callback() + symbol__inc_addr_sample() Now this functions runs out of memory and returns -ENOMEM. This is reported all the way up until function perf_session__process_event() returns to its caller, where -ENOMEM is changed to -EINVAL and processing stops: if ((skip = perf_session__process_event(session, event, head)) < 0) { pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", head, event->header.size, event->header.type); err = -EINVAL; goto out_err; } This occurred in the FINISHED_ROUND event when it has to process some 10000 entries and ran out of memory. This patch indicates the root cause and displays it in the status line of ther perf report GUI. Output before (on GUI status line): 0xf4198 [0x8]: failed to process type: 68 Output after: 0xf4198 [0x8]: failed to process type: 68 [not enough memory] Committer notes: the 'skip' variable needs to be initialized to -EINVAL, so that when the size is less than sizeof(struct perf_event_attr) we avoid this valid compiler warning: util/session.c: In function ‘perf_session__process_events’: util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized] err = skip; ~~~~^~~~~~ util/session.c:1874:6: note: ‘skip’ was declared here s64 skip; ^~~~ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf bench numa: Add define for RUSAGE_THREAD if not presentArnaldo Carvalho de Melo
While cross building perf to the ARC architecture on a fedora 30 host, we were failing with: CC /tmp/build/perf/bench/numa.o bench/numa.c: In function ‘worker_thread’: bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’? getrusage(RUSAGE_THREAD, &rusage); ^~~~~~~~~~~~~ SIGEV_THREAD bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in [perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1 arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225 [perfbuilder@60d5802468f6 perf]$ Trying to reproduce a report by Vineet, I noticed that, with just cross-built zlib and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define, check for that and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define in the system headers, check if it is defined in the 'perf bench numa' sources and define it if not. Now it builds and I have to figure out if the problem reported by Vineet only takes place if we have libelf or some other library available. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jiri Olsa <jolsa@kernel.org> Cc: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools lib traceevent: Change tag string for errorLeo Yan
The traceevent lib is used by the perf tool, and when executing perf test -v 6 it outputs error log on the ARM64 platform: running test 33 '*:*'trace-cmd: No such file or directory [...] trace-cmd: Invalid argument The trace event parsing code originally came from trace-cmd so it keeps the tag string "trace-cmd" for errors, this easily introduces the impression that the perf tool launches trace-cmd command for trace event parsing, but in fact the related parsing is accomplished by the traceevent lib. This patch changes the tag string to "libtraceevent" so that we can avoid confusion and let users to more easily connect the error with traceevent lib. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/20190424013802.27569-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf annotate: Fix build on 32 bit for BPF annotationThadeu Lima de Souza Cascardo
Commit 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") adds support for BPF programs annotations but the new code does not build on 32-bit. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Song Liu <songliubraving@fb.com> Fixes: 6987561c9e86 ("perf annotate: Enable annotation of BPF programs") Link: http://lkml.kernel.org/r/20190403194452.10845-1-cascardo@canonical.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02tools uapi x86: Sync vmx.h with the kernelArnaldo Carvalho de Melo
To pick up the changes from: 2b27924bb1d4 ("KVM: nVMX: always use early vmcs check when EPT is disabled") That causes this object in the tools/perf build process to be rebuilt: CC /tmp/build/perf/arch/x86/util/kvm-stat.o But it isn't using VMX_ABORT_ prefixed constants, so no change in behaviour. This silences this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h' diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: https://lkml.kernel.org/n/tip-bjbo3zc0r8i8oa0udpvftya6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02perf bpf: Return value with unlocking in perf_env__find_btf()Bo YU
In perf_env__find_btf(), we're returning without unlocking "env->bpf_progs.lock". There may be cause lockdep issue. Detected by CoversityScan, CID# 1444762:(program hangs(LOCK)) Signed-off-by: Bo YU <tsu.yubo@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 2db7b1e0bd49d: (perf bpf: Return NULL when RB tree lookup fails in perf_env__find_btf()) Link: http://lkml.kernel.org/r/20190422080138.10088-1-tsu.yubo@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Out of bounds access in xfrm IPSEC policy unlink, from Yue Haibing. 2) Missing length check for esp4 UDP encap, from Sabrina Dubroca. 3) Fix byte order of RX STBC access in mac80211, from Johannes Berg. 4) Inifnite loop in bpftool map create, from Alban Crequy. 5) Register mark fix in ebpf verifier after pkt/null checks, from Paul Chaignon. 6) Properly use rcu_dereference_sk_user_data in L2TP code, from Eric Dumazet. 7) Buffer overrun in marvell phy driver, from Andrew Lunn. 8) Several crash and statistics handling fixes to bnxt_en driver, from Michael Chan and Vasundhara Volam. 9) Several fixes to the TLS layer from Jakub Kicinski (copying negative amounts of data in reencrypt, reencrypt frag copying, blind nskb->sk NULL deref, etc). 10) Several UDP GRO fixes, from Paolo Abeni and Eric Dumazet. 11) PID/UID checks on ipv6 flow labels are inverted, from Willem de Bruijn. 12) Use after free in l2tp, from Eric Dumazet. 13) IPV6 route destroy races, also from Eric Dumazet. 14) SCTP state machine can erroneously run recursively, fix from Xin Long. 15) Adjust AF_PACKET msg_name length checks, add padding bytes if necessary. From Willem de Bruijn. 16) Preserve skb_iif, so that forwarded packets have consistent values even if fragmentation is involved. From Shmulik Ladkani. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits) udp: fix GRO packet of death ipv6: A few fixes on dereferencing rt->from rds: ib: force endiannes annotation selftests: fib_rule_tests: print the result and return 1 if any tests failed ipv4: ip_do_fragment: Preserve skb_iif during fragmentation net/tls: avoid NULL pointer deref on nskb->sk in fallback selftests: fib_rule_tests: Fix icmp proto with ipv6 packet: validate msg_namelen in send directly packet: in recvmsg msg_name return at least sizeof sockaddr_ll sctp: avoid running the sctp state machine recursively stmmac: pci: Fix typo in IOT2000 comment Documentation: fix netdev-FAQ.rst markup warning ipv6: fix races in ip6_dst_destroy() l2ip: fix possible use-after-free appletalk: Set error code if register_snap_client failed net: dsa: bcm_sf2: fix buffer overflow doing set_rxnfc rxrpc: Fix net namespace cleanup ipv6/flowlabel: wait rcu grace period before put_pid() vrf: Use orig netdev to count Ip6InNoRoutes and a fresh route lookup when sending dest unreach tcp: add sanity tests in tcp_add_backlog() ...
2019-05-02Merge tag 'for-linus-20190502' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "This is mostly io_uring fixes/tweaks. Most of these were actually done in time for the last -rc, but I wanted to ensure that everything tested out great before including them. The code delta looks larger than it really is, as it's mostly just comment additions/changes. Outside of the comment additions/changes, this is mostly removal of unnecessary barriers. In all, this pull request contains: - Tweak to how we handle errors at submission time. We now post a completion event if the error occurs on behalf of an sqe, instead of returning it through the system call. If the error happens outside of a specific sqe, we return the error through the system call. This makes it nicer to use and makes the "normal" use case behave the same as the offload cases. (me) - Fix for a missing req reference drop from async context (me) - If an sqe is submitted with RWF_NOWAIT, don't punt it to async context. Return -EAGAIN directly, instead of using it as a hint to do async punt. (Stefan) - Fix notes on barriers (Stefan) - Remove unnecessary barriers (Stefan) - Fix potential double free of memory in setup error (Mark) - Further improve sq poll CPU validation (Mark) - Fix page allocation warning and leak on buffer registration error (Mark) - Fix iov_iter_type() for new no-ref flag (Ming) - Fix a case where dio doesn't honor bio no-page-ref (Ming)" * tag 'for-linus-20190502' of git://git.kernel.dk/linux-block: io_uring: avoid page allocation warnings iov_iter: fix iov_iter_type block: fix handling for BIO_NO_PAGE_REF io_uring: drop req submit reference always in async punt io_uring: free allocated io_memory once io_uring: fix SQPOLL cpu validation io_uring: have submission side sqe errors post a cqe io_uring: remove unnecessary barrier after unsetting IORING_SQ_NEED_WAKEUP io_uring: remove unnecessary barrier after incrementing dropped counter io_uring: remove unnecessary barrier before reading SQ tail io_uring: remove unnecessary barrier after updating SQ head io_uring: remove unnecessary barrier before reading cq head io_uring: remove unnecessary barrier before wq_has_sleeper io_uring: fix notes on barriers io_uring: fix handling SQEs requesting NOWAIT
2019-05-02i2c: Prevent runtime suspend of adapter when Host Notify is requiredJarkko Nikula
Multiple users have reported their Synaptics touchpad has stopped working between v4.20.1 and v4.20.2 when using SMBus interface. The culprit for this appeared to be commit c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") that fixed the runtime PM for i2c-i801 SMBus adapter. Those Synaptics touchpad are using i2c-i801 for SMBus communication and testing showed they are able to get back working by preventing the runtime suspend of adapter. Normally when i2c-i801 SMBus adapter transmits with the client it resumes before operation and autosuspends after. However, if client requires SMBus Host Notify protocol, what those Synaptics touchpads do, then the host adapter must not go to runtime suspend since then it cannot process incoming SMBus Host Notify commands the client may send. Fix this by keeping I2C/SMBus adapter active in case client requires Host Notify. Reported-by: Keijo Vaara <ferdasyn@rocketmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=203297 Fixes: c5eb1190074c ("PCI / PM: Allow runtime PM without callback functions") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Keijo Vaara <ferdasyn@rocketmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-05-02i2c: synquacer: fix enumeration of slave devicesArd Biesheuvel
The I2C host driver for SynQuacer fails to populate the of_node and ACPI companion fields of the struct i2c_adapter it instantiates, resulting in enumeration of the subordinate I2C bus to fail. Fixes: 0d676a6c4390 ("i2c: add support for Socionext SynQuacer I2C controller") Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-05-02MAINTAINERS: friendly takeover of i2c-gpio driverWolfram Sang
I haven't heard from Haavard in years despite putting him to the CC list for i2c-gpio related mails. Since I was doing the work on this driver for a while now, let me take official maintainership, so it will be more clear to users. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Haavard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-05-02MAINTAINERS: Include vendor specific files under arch/*/events/*Kim Phillips
Add an explicit subdirectory specification for arch/x86/events/amd to the MAINTAINERS file, to distinguish it from its parent. This will produce the correct set of maintainers for the files found therein. Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Gary Hook <Gary.Hook@amd.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Stephane Eranian <eranian@google.com> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Fixes: 39b0332a2158 ("perf/x86: Move perf_event_amd.c ........... => x86/events/amd/core.c") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-02perf/x86/amd: Update generic hardware cache events for Family 17hKim Phillips
Add a new amd_hw_cache_event_ids_f17h assignment structure set for AMD families 17h and above, since a lot has changed. Specifically: L1 Data Cache The data cache access counter remains the same on Family 17h. For DC misses, PMCx041's definition changes with Family 17h, so instead we use the L2 cache accesses from L1 data cache misses counter (PMCx060,umask=0xc8). For DC hardware prefetch events, Family 17h breaks compatibility for PMCx067 "Data Prefetcher", so instead, we use PMCx05a "Hardware Prefetch DC Fills." L1 Instruction Cache PMCs 0x80 and 0x81 (32-byte IC fetches and misses) are backward compatible on Family 17h. For prefetches, we remove the erroneous PMCx04B assignment which counts how many software data cache prefetch load instructions were dispatched. LL - Last Level Cache Removing PMCs 7D, 7E, and 7F assignments, as they do not exist on Family 17h, where the last level cache is L3. L3 counters can be accessed using the existing AMD Uncore driver. Data TLB On Intel machines, data TLB accesses ("dTLB-loads") are assigned to counters that count load/store instructions retired. This is inconsistent with instruction TLB accesses, where Intel implementations report iTLB misses that hit in the STLB. Ideally, dTLB-loads would count higher level dTLB misses that hit in lower level TLBs, and dTLB-load-misses would report those that also missed in those lower-level TLBs, therefore causing a page table walk. That would be consistent with instruction TLB operation, remove the redundancy between dTLB-loads and L1-dcache-loads, and prevent perf from producing artificially low percentage ratios, i.e. the "0.01%" below: 42,550,869 L1-dcache-loads 41,591,860 dTLB-loads 4,802 dTLB-load-misses # 0.01% of all dTLB cache hits 7,283,682 L1-dcache-stores 7,912,392 dTLB-stores 310 dTLB-store-misses On AMD Families prior to 17h, the "Data Cache Accesses" counter is used, which is slightly better than load/store instructions retired, but still counts in terms of individual load/store operations instead of TLB operations. So, for AMD Families 17h and higher, this patch assigns "dTLB-loads" to a counter for L1 dTLB misses that hit in the L2 dTLB, and "dTLB-load-misses" to a counter for L1 DTLB misses that caused L2 DTLB misses and therefore also caused page table walks. This results in a much more accurate view of data TLB performance: 60,961,781 L1-dcache-loads 4,601 dTLB-loads 963 dTLB-load-misses # 20.93% of all dTLB cache hits Note that for all AMD families, data loads and stores are combined in a single accesses counter, so no 'L1-dcache-stores' are reported separately, and stores are counted with loads in 'L1-dcache-loads'. Also note that the "% of all dTLB cache hits" string is misleading because (a) "dTLB cache": although TLBs can be considered caches for page tables, in this context, it can be misinterpreted as data cache hits because the figures are similar (at least on Intel), and (b) not all those loads (technically accesses) technically "hit" at that hardware level. "% of all dTLB accesses" would be more clear/accurate. Instruction TLB On Intel machines, 'iTLB-loads' measure iTLB misses that hit in the STLB, and 'iTLB-load-misses' measure iTLB misses that also missed in the STLB and completed a page table walk. For AMD Family 17h and above, for 'iTLB-loads' we replace the erroneous instruction cache fetches counter with PMCx084 "L1 ITLB Miss, L2 ITLB Hit". For 'iTLB-load-misses' we still use PMCx085 "L1 ITLB Miss, L2 ITLB Miss", but set a 0xff umask because without it the event does not get counted. Branch Predictor (BPU) PMCs 0xc2 and 0xc3 continue to be valid across all AMD Families. Node Level Events Family 17h does not have a PMCx0e9 counter, and corresponding counters have not been made available publicly, so for now, we mark them as unsupported for Families 17h and above. Reference: "Open-Source Register Reference For AMD Family 17h Processors Models 00h-2Fh" Released 7/17/2018, Publication #56255, Revision 3.03: https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf [ mingo: tidied up the line breaks. ] Signed-off-by: Kim Phillips <kim.phillips@amd.com> Cc: <stable@vger.kernel.org> # v4.9+ Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Liška <mliska@suse.cz> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pu Wen <puwen@hygon.cn> Cc: Stephane Eranian <eranian@google.com> Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Lendacky <Thomas.Lendacky@amd.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Fixes: e40ed1542dd7 ("perf/x86: Add perf support for AMD family-17h processors") Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-02i2c: designware: ratelimit 'transfer when suspended' errorsWolfram Sang
There are two problems with dev_err() here. One: It is not ratelimited. Two: We don't see which driver tried to transfer something with a suspended adapter. Switch to dev_WARN_ONCE to fix both issues. Drawback is that we don't see if multiple drivers are trying to transfer while suspended. They need to be discovered one after the other now. This is better than a high CPU load because a really broken driver might try to resend endlessly. Link: https://bugs.archlinux.org/task/62391 Fixes: 275154155538 ("i2c: designware: Do not allow i2c_dw_xfer() calls while suspended") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reported-by: skidnik <skidnik@gmail.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: skidnik <skidnik@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-05-02Merge tag 'pci-v5.1-fixes-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "I apologize for sending these so late in the cycle. We went back and forth about how to deal with the unexpected logging of intentional link state changes and finally decided to just config them off by default. PCI fixes: - Stop ignoring "pci=disable_acs_redir" parameter (Logan Gunthorpe) - Use shared MSI/MSI-X vector for Link Bandwidth Management (Alex Williamson) - Add Kconfig option for Link Bandwidth notification messages (Keith Busch)" * tag 'pci-v5.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/LINK: Add Kconfig option (default off) PCI/portdrv: Use shared MSI/MSI-X vector for Bandwidth Management PCI: Fix issue with "pci=disable_acs_redir" parameter being ignored
2019-05-02Merge tag 'mtd/fixes-for-5.1-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fix from Richard Weinberger: "A single regression fix for the marvell nand driver" * tag 'mtd/fixes-for-5.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: marvell: Clean the controller state before each operation
2019-05-02PCI/LINK: Add Kconfig option (default off)Keith Busch
e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") added dmesg logging whenever a link changes speed or width to a state that is considered degraded. Unfortunately, it cannot differentiate signal integrity-related link changes from those intentionally initiated by an endpoint driver, including drivers that may live in userspace or VMs when making use of vfio-pci. Some GPU drivers actively manage the link state to save power, which generates a stream of messages like this: vfio-pci 0000:07:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:02.0 (capable of 64.000 Gb/s with 5 GT/s x16 link) Since we can't distinguish the intentional changes from the signal integrity issues, leave the reporting turned off by default. Add a Kconfig option to turn it on if desired. Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") Link: https://lore.kernel.org/linux-pci/20190501142942.26972-1-keith.busch@intel.com Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-02ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavourAl Viro
To choose whether to pick the GID from the old (16bit) or new (32bit) field, we should check if the old gid field is set to 0xffff. Mainline checks the old *UID* field instead - cut'n'paste from the corresponding code in ufs_get_inode_uid(). Fixes: 252e211e90ce Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-05-02powerpc/32s: Fix BATs setting with CONFIG_STRICT_KERNEL_RWXChristophe Leroy
Serge reported some crashes with CONFIG_STRICT_KERNEL_RWX enabled on a book3s32 machine. Analysis shows two issues: - BATs addresses and sizes are not properly aligned. - There is a gap between the last address covered by BATs and the first address covered by pages. Memory mapped with DBATs: 0: 0xc0000000-0xc07fffff 0x00000000 Kernel RO coherent 1: 0xc0800000-0xc0bfffff 0x00800000 Kernel RO coherent 2: 0xc0c00000-0xc13fffff 0x00c00000 Kernel RW coherent 3: 0xc1400000-0xc23fffff 0x01400000 Kernel RW coherent 4: 0xc2400000-0xc43fffff 0x02400000 Kernel RW coherent 5: 0xc4400000-0xc83fffff 0x04400000 Kernel RW coherent 6: 0xc8400000-0xd03fffff 0x08400000 Kernel RW coherent 7: 0xd0400000-0xe03fffff 0x10400000 Kernel RW coherent Memory mapped with pages: 0xe1000000-0xefffffff 0x21000000 240M rw present dirty accessed This patch fixes both issues. With the patch, we get the following which is as expected: Memory mapped with DBATs: 0: 0xc0000000-0xc07fffff 0x00000000 Kernel RO coherent 1: 0xc0800000-0xc0bfffff 0x00800000 Kernel RO coherent 2: 0xc0c00000-0xc0ffffff 0x00c00000 Kernel RW coherent 3: 0xc1000000-0xc1ffffff 0x01000000 Kernel RW coherent 4: 0xc2000000-0xc3ffffff 0x02000000 Kernel RW coherent 5: 0xc4000000-0xc7ffffff 0x04000000 Kernel RW coherent 6: 0xc8000000-0xcfffffff 0x08000000 Kernel RW coherent 7: 0xd0000000-0xdfffffff 0x10000000 Kernel RW coherent Memory mapped with pages: 0xe0000000-0xefffffff 0x20000000 256M rw present dirty accessed Fixes: 63b2bc619565 ("powerpc/mm/32s: Use BATs for STRICT_KERNEL_RWX") Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-05-01udp: fix GRO packet of deathEric Dumazet
syzbot was able to crash host by sending UDP packets with a 0 payload. TCP does not have this issue since we do not aggregate packets without payload. Since dev_gro_receive() sets gso_size based on skb_gro_len(skb) it seems not worth trying to cope with padded packets. BUG: KASAN: slab-out-of-bounds in skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826 Read of size 16 at addr ffff88808893fff0 by task syz-executor612/7889 CPU: 0 PID: 7889 Comm: syz-executor612 Not tainted 5.1.0-rc7+ #96 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load16_noabort+0x14/0x20 mm/kasan/generic_report.c:133 skb_gro_receive+0xf5f/0x10e0 net/core/skbuff.c:3826 udp_gro_receive_segment net/ipv4/udp_offload.c:382 [inline] call_gro_receive include/linux/netdevice.h:2349 [inline] udp_gro_receive+0xb61/0xfd0 net/ipv4/udp_offload.c:414 udp4_gro_receive+0x763/0xeb0 net/ipv4/udp_offload.c:478 inet_gro_receive+0xe72/0x1110 net/ipv4/af_inet.c:1510 dev_gro_receive+0x1cd0/0x23c0 net/core/dev.c:5581 napi_gro_frags+0x36b/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441cc0 Code: 05 48 3d 01 f0 ff ff 0f 83 9d 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 83 3d 51 93 29 00 00 75 14 b8 14 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 74 09 fc ff c3 48 83 ec 08 e8 ba 2b 00 00 RSP: 002b:00007ffe8c716118 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007ffe8c716150 RCX: 0000000000441cc0 RDX: 0000000000000001 RSI: 00007ffe8c716170 RDI: 00000000000000f0 RBP: 0000000000000000 R08: 000000000000ffff R09: 0000000000a64668 R10: 0000000020000040 R11: 0000000000000246 R12: 000000000000c2d9 R13: 0000000000402b50 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 5143: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_kmalloc mm/kasan/common.c:497 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:470 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:505 slab_post_alloc_hook mm/slab.h:437 [inline] slab_alloc mm/slab.c:3393 [inline] kmem_cache_alloc+0x11a/0x6f0 mm/slab.c:3555 mm_alloc+0x1d/0xd0 kernel/fork.c:1030 bprm_mm_init fs/exec.c:363 [inline] __do_execve_file.isra.0+0xaa3/0x23f0 fs/exec.c:1791 do_execveat_common fs/exec.c:1865 [inline] do_execve fs/exec.c:1882 [inline] __do_sys_execve fs/exec.c:1958 [inline] __se_sys_execve fs/exec.c:1953 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 5351: save_stack+0x45/0xd0 mm/kasan/common.c:75 set_track mm/kasan/common.c:87 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:459 kasan_slab_free+0xe/0x10 mm/kasan/common.c:467 __cache_free mm/slab.c:3499 [inline] kmem_cache_free+0x86/0x260 mm/slab.c:3765 __mmdrop+0x238/0x320 kernel/fork.c:677 mmdrop include/linux/sched/mm.h:49 [inline] finish_task_switch+0x47b/0x780 kernel/sched/core.c:2746 context_switch kernel/sched/core.c:2880 [inline] __schedule+0x81b/0x1cc0 kernel/sched/core.c:3518 preempt_schedule_irq+0xb5/0x140 kernel/sched/core.c:3745 retint_kernel+0x1b/0x2d arch_local_irq_restore arch/x86/include/asm/paravirt.h:767 [inline] kmem_cache_free+0xab/0x260 mm/slab.c:3766 anon_vma_chain_free mm/rmap.c:134 [inline] unlink_anon_vmas+0x2ba/0x870 mm/rmap.c:401 free_pgtables+0x1af/0x2f0 mm/memory.c:394 exit_mmap+0x2d1/0x530 mm/mmap.c:3144 __mmput kernel/fork.c:1046 [inline] mmput+0x15f/0x4c0 kernel/fork.c:1067 exec_mmap fs/exec.c:1046 [inline] flush_old_exec+0x8d9/0x1c20 fs/exec.c:1279 load_elf_binary+0x9bc/0x53f0 fs/binfmt_elf.c:864 search_binary_handler fs/exec.c:1656 [inline] search_binary_handler+0x17f/0x570 fs/exec.c:1634 exec_binprm fs/exec.c:1698 [inline] __do_execve_file.isra.0+0x1394/0x23f0 fs/exec.c:1818 do_execveat_common fs/exec.c:1865 [inline] do_execve fs/exec.c:1882 [inline] __do_sys_execve fs/exec.c:1958 [inline] __se_sys_execve fs/exec.c:1953 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1953 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff88808893f7c0 which belongs to the cache mm_struct of size 1496 The buggy address is located 600 bytes to the right of 1496-byte region [ffff88808893f7c0, ffff88808893fd98) The buggy address belongs to the page: page:ffffea0002224f80 count:1 mapcount:0 mapping:ffff88821bc40ac0 index:0xffff88808893f7c0 compound_mapcount: 0 flags: 0x1fffc0000010200(slab|head) raw: 01fffc0000010200 ffffea00025b4f08 ffffea00027b9d08 ffff88821bc40ac0 raw: ffff88808893f7c0 ffff88808893e440 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808893fe80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88808893ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88808893ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff888088940000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888088940080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01Merge tag 'for-v5.1-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel: "Two more fixes for the 5.1 cycle. One division by zero fix in a specific driver and one core workaround for bad userspace behaviour from systemd regarding uevents. IMHO this can be considered to be a userspace bug, but the debug messages are useless anyways - cpcap-battery: fix a division by zero - core: fix systemd issue due to log messages produced by uevent" * tag 'for-v5.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG power: supply: cpcap-battery: Fix division by zero
2019-05-01ipv6: A few fixes on dereferencing rt->fromMartin KaFai Lau
It is a followup after the fix in commit 9c69a1320515 ("route: Avoid crash from dereferencing NULL rt->from") rt6_do_redirect(): 1. NULL checking is needed on rt->from because a parallel fib6_info delete could happen that sets rt->from to NULL. (e.g. rt6_remove_exception() and fib6_drop_pcpu_from()). 2. fib6_info_hold() is not enough. Same reason as (1). Meaning, holding dst->__refcnt cannot ensure rt->from is not NULL or rt->from->fib6_ref is not 0. Instead of using fib6_info_hold_safe() which ip6_rt_cache_alloc() is already doing, this patch chooses to extend the rcu section to keep "from" dereference-able after checking for NULL. inet6_rtm_getroute(): 1. NULL checking is also needed on rt->from for a similar reason. Note that inet6_rtm_getroute() is using RTNL_FLAG_DOIT_UNLOCKED. Fixes: a68886a69180 ("net/ipv6: Make from in rt6_info rcu protected") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Wei Wang <weiwan@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01rds: ib: force endiannes annotationNicholas Mc Guire
While the endiannes is being handled correctly as indicated by the comment above the offending line - sparse was unhappy with the missing annotation as be64_to_cpu() expects a __be64 argument. To mitigate this annotation all involved variables are changed to a consistent __le64 and the conversion to uint64_t delayed to the call to rds_cong_map_updated(). Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01Merge tag 'arc-5.1-final' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "A few minor fixes for ARC. - regression in memset if line size !64 - avoid panic if PAE and IOC" * tag 'arc-5.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: memset: fix build with L1_CACHE_SHIFT != 6 ARC: [hsdk] Make it easier to add PAE40 region to DTB ARC: PAE40: don't panic and instead turn off hw ioc
2019-05-01PCI/portdrv: Use shared MSI/MSI-X vector for Bandwidth ManagementAlex Williamson
The Interrupt Message Number in the PCIe Capabilities register (PCIe r4.0, sec 7.5.3.2) indicates which MSI/MSI-X vector is shared by interrupts related to the PCIe Capability, including Link Bandwidth Management and Link Autonomous Bandwidth Interrupts (Link Control, 7.5.3.7), Command Completed and Hot-Plug Interrupts (Slot Control, 7.5.3.10), and the PME Interrupt (Root Control, 7.5.3.12). pcie_message_numbers() checked whether we want to enable PME or Hot-Plug interrupts but neglected to check for Link Bandwidth Management, so if we only wanted the Bandwidth Management interrupts, it decided we didn't need any vectors at all. Then pcie_port_enable_irq_vec() tried to reallocate zero vectors, which failed, resulting in fallback to INTx. On some systems, e.g., an X79-based workstation, that INTx seems broken or not handled correctly, so we got spurious IRQ16 interrupts for Bandwidth Management events. Change pcie_message_numbers() so that if we want Link Bandwidth Management interrupts, we use the shared MSI/MSI-X vector from the PCIe Capabilities register. Fixes: e8303bb7a75c ("PCI/LINK: Report degraded links via link bandwidth notification") Link: https://lore.kernel.org/lkml/155597243666.19387.1205950870601742062.stgit@gimli.home Signed-off-by: Alex Williamson <alex.williamson@redhat.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-01Merge tag 'acpi-5.1-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Revert a recent ACPICA change that caused initialization to fail on systems with Thunderbolt docking stations connected at the init time" * tag 'acpi-5.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Clear status of GPEs before enabling them"
2019-05-01gcc-9: don't warn about uninitialized btrfs extent_type variableLinus Torvalds
The 'extent_type' variable does seem to be reliably initialized, but it's _very_ non-obvious, since there's a "goto next" case that jumps over the normal initialization. That will then always trigger the "start >= extent_end" test, which will end up never falling through to the use of that variable. But the code is certainly not obvious, and the compiler warning looks reasonable. Make 'extent_type' an int, and initialize it to an invalid negative value, which seems to be the common pattern in other places. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-01selftests: fib_rule_tests: print the result and return 1 if any tests failedHangbin Liu
Fixes: 65b2b4939a64 ("selftests: net: initial fib rule tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01gcc-9: properly declare the {pv,hv}clock_page storageLinus Torvalds
The pvlock_page and hvclock_page variables are (as the name implies) addresses to pages, created by the linker script. But we declared them as just "extern u8" variables, which _works_, but now that gcc does some more bounds checking, it causes warnings like warning: array subscript 1 is outside array bounds of ‘u8[1]’ when we then access more than one byte from those variables. Fix this by simply making the declaration of the variables match reality, which makes the compiler happy too. Signed-off-by: Linus Torvalds <torvalds@-linux-foundation.org>
2019-05-01gcc-9: don't warn about uninitialized variableLinus Torvalds
I'm not sure what made gcc warn about this code now. The 'ret' variable does end up initialized in all cases, but it's definitely not obvious, so the compiler is quite reasonable to warn about this. So just add initialization to make it all much more obvious both to compilers and to humans. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-01gcc-9: silence 'address-of-packed-member' warningLinus Torvalds
We already did this for clang, but now gcc has that warning too. Yes, yes, the address may be unaligned. And that's kind of the point. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-01ipv4: ip_do_fragment: Preserve skb_iif during fragmentationShmulik Ladkani
Previously, during fragmentation after forwarding, skb->skb_iif isn't preserved, i.e. 'ip_copy_metadata' does not copy skb_iif from given 'from' skb. As a result, ip_do_fragment's creates fragments with zero skb_iif, leading to inconsistent behavior. Assume for example an eBPF program attached at tc egress (post forwarding) that examines __sk_buff->ingress_ifindex: - the correct iif is observed if forwarding path does not involve fragmentation/refragmentation - a bogus iif is observed if forwarding path involves fragmentation/refragmentatiom Fix, by preserving skb_iif during 'ip_copy_metadata'. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01io_uring: avoid page allocation warningsMark Rutland
In io_sqe_buffer_register() we allocate a number of arrays based on the iov_len from the user-provided iov. While we limit iov_len to SZ_1G, we can still attempt to allocate arrays exceeding MAX_ORDER. On a 64-bit system with 4KiB pages, for an iov where iov_base = 0x10 and iov_len = SZ_1G, we'll calculate that nr_pages = 262145. When we try to allocate a corresponding array of (16-byte) bio_vecs, requiring 4194320 bytes, which is greater than 4MiB. This results in SLUB warning that we're trying to allocate greater than MAX_ORDER, and failing the allocation. Avoid this by using kvmalloc() for allocations dependent on the user-provided iov_len. At the same time, fix a leak of imu->bvec when registration fails. Full splat from before this patch: WARNING: CPU: 1 PID: 2314 at mm/page_alloc.c:4595 __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2314 Comm: syz-executor326 Not tainted 5.1.0-rc7-dirty #4 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2f0 include/linux/compiler.h:193 show_stack+0x20/0x30 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x190 lib/dump_stack.c:113 panic+0x384/0x68c kernel/panic.c:214 __warn+0x2bc/0x2c0 kernel/panic.c:571 report_bug+0x228/0x2d8 lib/bug.c:186 bug_handler+0xa0/0x1a0 arch/arm64/kernel/traps.c:956 call_break_hook arch/arm64/kernel/debug-monitors.c:301 [inline] brk_handler+0x1d4/0x388 arch/arm64/kernel/debug-monitors.c:316 do_debug_exception+0x1a0/0x468 arch/arm64/mm/fault.c:831 el1_dbg+0x18/0x8c __alloc_pages_nodemask+0x7ac/0x2938 mm/page_alloc.c:4595 alloc_pages_current+0x164/0x278 mm/mempolicy.c:2132 alloc_pages include/linux/gfp.h:509 [inline] kmalloc_order+0x20/0x50 mm/slab_common.c:1231 kmalloc_order_trace+0x30/0x2b0 mm/slab_common.c:1243 kmalloc_large include/linux/slab.h:480 [inline] __kmalloc+0x3dc/0x4f0 mm/slub.c:3791 kmalloc_array include/linux/slab.h:670 [inline] io_sqe_buffer_register fs/io_uring.c:2472 [inline] __io_uring_register fs/io_uring.c:2962 [inline] __do_sys_io_uring_register fs/io_uring.c:3008 [inline] __se_sys_io_uring_register fs/io_uring.c:2990 [inline] __arm64_sys_io_uring_register+0x9e0/0x1bc8 fs/io_uring.c:2990 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall arch/arm64/kernel/syscall.c:47 [inline] el0_svc_common.constprop.0+0x148/0x2e0 arch/arm64/kernel/syscall.c:83 el0_svc_handler+0xdc/0x100 arch/arm64/kernel/syscall.c:129 el0_svc+0x8/0xc arch/arm64/kernel/entry.S:948 SMP: stopping secondary CPUs Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled CPU features: 0x002,23000438 Memory Limit: none Rebooting in 1 seconds.. Fixes: edafccee56ff3167 ("io_uring: add support for pre-mapped user IO buffers") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-01net/tls: avoid NULL pointer deref on nskb->sk in fallbackJakub Kicinski
update_chksum() accesses nskb->sk before it has been set by complete_skb(), move the init up. Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01selftests: fib_rule_tests: Fix icmp proto with ipv6David Ahern
A recent commit returns an error if icmp is used as the ip-proto for IPv6 fib rules. Update fib_rule_tests to send ipv6-icmp instead of icmp. Fixes: 5e1a99eae8499 ("ipv4: Add ICMPv6 support when parse route ipproto") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01packet: validate msg_namelen in send directlyWillem de Bruijn
Packet sockets in datagram mode take a destination address. Verify its length before passing to dev_hard_header. Prior to 2.6.14-rc3, the send code ignored sll_halen. This is established behavior. Directly compare msg_namelen to dev->addr_len. Change v1->v2: initialize addr in all paths Fixes: 6b8d95f1795c4 ("packet: validate address length if non-zero") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01packet: in recvmsg msg_name return at least sizeof sockaddr_llWillem de Bruijn
Packet send checks that msg_name is at least sizeof sockaddr_ll. Packet recv must return at least this length, so that its output can be passed unmodified to packet send. This ceased to be true since adding support for lladdr longer than sll_addr. Since, the return value uses true address length. Always return at least sizeof sockaddr_ll, even if address length is shorter. Zero the padding bytes. Change v1->v2: do not overwrite zeroed padding again. use copy_len. Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.") Suggested-by: David Laight <David.Laight@aculab.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 05:11:57 +0000