| Age | Commit message (Collapse) | Author |
|---|
|
Align with firmware tools, no functionality change
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We forgot to set the error code on this error path.
Fixes: 4a23fc8cc068 ("ALSA: lx6464es: add error handling for pci_ioremap_bar")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The current code is not setting the compressed IRQ as a wake
source. Normally this doesn't cause any issues as the CODEC
IRQ is set as a wake source by the jack detection code and the
CODEC only produces a single IRQ line. However if the system
is not using jack detection the compressed audio IRQ should
still function as a wake source, as such directly set the
compressed audio IRQ as a wake source.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The current code that reads the algorithm list from the DSP is
somewhat unclear, it converts directly from bytes to registers using
a hard coded divide by 2. Most offsets are usually handled in DSP
words within the driver and there is a function specifically for
converting from words to register addresses. So update the handling
to use these. This also removes the assumption that the registers
are 16-bit word addressed, which will no longer be true on some of
our newer parts.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the possibility to apply and query the clock signal duty cycle ratio.
This is useful when the duty cycle of the clock signal depends on some
other parameters controlled by the clock framework.
For example, the duty cycle of a divider may depends on the raw divider
setting (ratio = N / div) , which is controlled by the CCF. In such case,
going through the pwm framework to control the duty cycle ratio of this
clock would be a burden.
A clock provider is not required to implement the operation to set and get
the duty cycle. If it does not implement .get_duty_cycle(), the ratio is
assumed to be 50%.
This change also adds a new flag, CLK_DUTY_CYCLE_PARENT. This flag should
be used to indicate that a clock, such as gates and muxes, may inherit
the duty cycle ratio of its parent clock. If a clock does not provide a
get_duty_cycle() callback and has CLK_DUTY_CYCLE_PARENT, then the call
will be directly forwarded to its parent clock, if any. For
set_duty_cycle(), the clock should also have CLK_SET_RATE_PARENT for the
call to be forwarded
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20180619144141.8506-1-jbrunet@baylibre.com
|
|
Currently, the core will continue processing open/hw_params
component callbacks after one has failed even though it will abort
immediately afterwards. This is unnecessary and also has the issue
that close/hw_free will be called on the component which failed
open/hw_params which could result in issues if the driver doesn't
expect this behaviour.
Update the core to abort processing open/hw_params when an error
is hit and only call close/hw_free for those components that were
successfully opened.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are two commercially-available Broadwell platforms based on I2S
(Dell XPS13 and 'Samus' Pixel 2015 Chromebook).
Fix a copy/paste issue to allow each platform to enable different
features if needed when SOF is enabled
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While we are at it, add entries for machine drivers that are used on
SOF-based platforms. The drivers will be submitted upstream after the
core SOF patches, but there's no harm in adding these references now.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No functionality change for Skylake driver, add relevant names needed
by SOF for BXT/APL, GLK and CNL.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds da7219_max98357a machine driver entry into
machine table
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
No functionality change, just move to common tables to make it easier
to deal with SOF and share the same machine drivers - as done
previously for BYT/CHT/HSW/BDW.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no need to deal with DMICs if the DSP is not present and
there is no ACPI machine ID found.
Simplify before moving these ACPI tables to sound/soc/intel/common
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use truncated names in bxt id table and bxt_da7219_max98357a machine
as platform device id table expects names to be less then 20chars.
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
platform support fixed constraint hw_prams as Stereo, 48KHz, 16 bits.
This fixed the headset mic recorded noise due to mono capturing
request from some apps. e.g. online Voice Recorder
Signed-off-by: Louis Collard <louiscollard@google.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now the dma_slave_map is available for PXA architecture, switch the SSP
device to it.
This specifically means that :
- for platform data based machines, the DMA requestor channels are
extracted from the slave map, where pxa-ssp-dai.<N> is a 1-1 match to
ssp.<N>, and the channels are either "rx" or "tx".
- for device tree platforms, the dma node should be hooked into the
pxa2xx-ac97 or pxa-ssp-dai node.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Daniel Mack <daniel@zonque.org>
|
|
As the last driver using the former mechanism to acquire the DMA
requestor line has be converted to the dma_slave_map, remove all these
resources from the PXA devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
|
|
Add some documentation for the pxad_param structure, and describe the
contract behind the minimal required priority of a DMA channel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
As the pxa architecture switched towards the dmaengine slave map, the
old compatibility mechanism to acquire the dma requestor line number and
priority are not needed anymore.
This patch simplifies the dma resource acquisition, using the more
generic function dma_request_slave_channel().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
As what former drcmr -1 value meant, add a this as a default to each
channel, ie. that by default no requestor line is used.
This is specifically used for network drivers smc91x and smc911x, and
needed for their port to slave maps.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.
This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
|
|
In order to remove the specific knowledge of the dma mapping from PXA
drivers, add a default slave map for pxa architectures.
This won't impact MMP architecture, but is aimed only at all PXA boards.
This is the first step, and once all drivers are converted,
pxad_filter_fn() will be made static, and the DMA resources removed from
device.c.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Vinod Koul <vkoul@kernel.org>
|
|
Change the over-current detect threshold on the Acer Iconia 8 from
2000ua to 1500uA, this fixes headset button presses not being detected.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a quirk for the Nuvison/TMax TM800W560 tablet, this tablet uses IN1
for the internal mic rather then the default IN3 and it uses JD2 rather
then JD1 for its not-inverted jack-detect switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
tegra_rt5677_probe() gets a couple of device nodes with of_parse_phandle(),
but there is no release of them.
The patch adds the release to tegra_rt5677_remove() and
to error handling paths in the probe.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the devicetree support, so that the driver can be used in a
devictree platform.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This adds a binding for the Marvell PXA audio complex, available in
pxa2xx and pxa3xx variants.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Work is guaranteed to be initialized on exit. Drop the unnecessary
if statement and always call flush_work.
This fixes a warning seen with clang:
sound/soc/codecs/pcm1789.c:265:13: warning: address of 'priv->work' will
always evaluate to 'true' [-Wpointer-bool-conversion]
if (&priv->work)
~~ ~~~~~~^~~~
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This is the initial codec driver for rt5682.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add headphone auto switching controls
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
These aren't needed and some userspace apps don't work consistently with
them.
Remove Playback/Capture from control names
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mic bias boost control
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The structure soc_codec_dev_ak4458 is local to the source and do not
need to be in global scope and can be const, make it static const.
Cleans up sparse warnings:
warning: symbol 'soc_codec_dev_ak4458' was not declared. Should it
be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The structure ak5558_pm and soc_codec_dev_ak5558 are local to the
source and do not need to be in global scope, so make them static.
Also make soc_codec_dev_ak5558 static.
Cleans up sparse warnings:
warning: symbol 'ak5558_pm' was not declared. Should it be static?
warning: symbol 'soc_codec_dev_ak5558' was not declared. Should it be
static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The pointer dmic_codec_dev is local to the source and does not need
to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'dmic_codec_dev' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_card is retrieved as device drvdata during unbind().
Set it as drvdata during bind() to avoid memory corruption during
unbind().
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
rsnd priv has many parameters. On __rsnd_dai_probe() it uses
rsnd_rdai_get() to get rdai pointer, but is using priv->daidrv
directly to get daidrvhv, but it is confusable for reader.
This patch adds rsnd_daidrv_get() to get daidrv from priv.
Now reader can understand that rdai and daidrv are related.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds headphone and microphone jack detection gpios as same
as simple-card driver.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch moves headphone and microphone detection to probe() of
snd_soc_card from init() of snd_soc_dai_link. This is because init()
is called (and an input device /dev/input/eventX is created too)
twice or above if simple card has two or more DAI links.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch moves headphone and microphone jack detection gpios from
simple-card driver. It is preparing for using this feature from other
drivers.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a quirk for the Chuwi Vi10 tablet, this tablet uses IN1 for the
internal mic rather then the default IN3 and it uses JD2 rather
then JD1 for its jack-detect switch.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
With gcc 4.1.2:
sound/soc/codecs/rt1305.c: In function ‘rt1305_calibrate’:
sound/soc/codecs/rt1305.c:1069: warning: integer constant is too large for ‘long’ type
sound/soc/codecs/rt1305.c:1086: warning: integer constant is too large for ‘long’ type
Add the missing "ULL" suffixes to fix this.
Fixes: 29bc643ddd7efb74 ("ASoC: rt1305: Add RT1305/RT1306 amplifier driver")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch makes the rockchip i2s pcm configurable by adding
rockchip pcm config for devm_snd_dmaengine_pcm_register.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_rk_mc_probe() gets a couple of device nodes with of_parse_phandle(),
but there is no release of them.
The patch adds remove handler and proper error handling in the probe.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support of iec958 controls for STM32 SAI.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix crash in those platforms whose machine driver does not expose
platform_info. For those platforms we rely on default value and
select I2SSP channel.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SSICR has SWSP bit (= Serial WS Polarity) which decides WS pin 1st
channel polarity (low or hi). This bit shouldn't exchange after running.
Current SSI "parent" doesn't care SSICR, just controls clock only.
Because of this behavior, if platform uses SSI0 as playback,
SSI1 as capture, and if user starts capture -> playback order,
SSI0 SSICR::SWSP bit exchanged 0 -> 1 during captureing, and it makes
capture noise.
This patch cares SSICR on SSI parent, too.
Special thanks to Yokoyama-san
Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If SSIs are sharing WS pin, it should has .symmetric_rates.
This patch sets it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
