summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-19ACPI, APEI, Error Record Serialization Table (ERST) supportHuang Ying
ERST is a way provided by APEI to save and retrieve hardware error record to and from some simple persistent storage (such as flash). The Linux kernel support implementation is quite simple and workable in NMI context. So it can be used to save hardware error record into flash in hardware error exception or NMI handler, where other more complex persistent storage such as disk is not usable. After saving hardware error records via ERST in hardware error exception or NMI handler, the error records can be retrieved and logged into disk or network after a clean reboot. For more information about ERST, please refer to ACPI Specification version 4.0, section 17.4. This patch incorporate fixes from Jin Dongming. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> CC: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, Generic Hardware Error Source memory error supportHuang Ying
Generic Hardware Error Source provides a way to report platform hardware errors (such as that from chipset). It works in so called "Firmware First" mode, that is, hardware errors are reported to firmware firstly, then reported to Linux by firmware. This way, some non-standard hardware error registers or non-standard hardware link can be checked by firmware to produce more valuable hardware error information for Linux. Now, only SCI notification type and memory errors are supported. More notification type and hardware error type will be added later. These memory errors are reported to user space through /dev/mcelog via faking a corrected Machine Check, so that the error memory page can be offlined by /sbin/mcelog if the error count for one page is beyond the threshold. On some machines, Machine Check can not report physical address for some corrected memory errors, but GHES can do that. So this simplified GHES is implemented firstly. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, UEFI Common Platform Error Record (CPER) headerHuang Ying
CPER stands for Common Platform Error Record, it is the hardware error record format used to describe platform hardware error by various APEI tables, such as ERST, BERT and HEST etc. For more information about CPER, please refer to Appendix N of UEFI Specification version 2.3. This patch mainly includes the data structure difinition header file used by other files. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19Unified UUID/GUID definitionHuang Ying
There are many different UUID/GUID definitions in kernel, such as that in EFI, many file systems, some drivers, etc. Every kernel components need UUID/GUID has its own definition. This patch provides a unified definition for UUID/GUID. UUID is defined via typedef. This makes that UUID appears more like a preliminary type, and makes the data type explicit (comparing with implicit "u8 uuid[16]"). The binary representation of UUID/GUID can be little-endian (used by EFI, etc) or big-endian (defined by RFC4122), so both is defined. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI Hardware Error Device (PNP0C33) supportHuang Ying
Hardware Error Device (PNP0C33) is used to report some hardware errors notified via SCI, mainly the corrected errors. Some APEI Generic Hardware Error Source (GHES) may use SCI on hardware error device to notify hardware error to kernel. After receiving notification from ACPI core, it is forwarded to all listeners via a notifier chain. The listener such as APEI GHES should check corresponding error source for new events when notified. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setupHuang Ying
Now, a dedicated HEST tabling parsing code is used for PCIE AER firmware_first setup. It is rebased on general HEST tabling parsing code of APEI. The firmware_first setup code is moved from PCI core to AER driver too, because it is only AER related. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, Document for APEIHuang Ying
Add document for APEI, including kernel parameters and EINJ debug file sytem interface. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, EINJ supportHuang Ying
EINJ provides a hardware error injection mechanism, this is useful for debugging and testing of other APEI and RAS features. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, HEST table parsingHuang Ying
HEST describes error sources in detail; communicating operational parameters (i.e. severity levels, masking bits, and threshold values) to OS as necessary. It also allows the platform to report error sources for which OS would typically not implement support (for example, chipset-specific error registers). HEST information may be needed by other subsystems. For example, HEST PCIE AER error source information describes whether a PCIE root port works in "firmware first" mode, this is needed by general PCIE AER error subsystem. So a public HEST tabling parsing interface is provided. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19ACPI, APEI, APEI supporting infrastructureHuang Ying
APEI stands for ACPI Platform Error Interface, which allows to report errors (for example from the chipset) to the operating system. This improves NMI handling especially. In addition it supports error serialization and error injection. For more information about APEI, please refer to ACPI Specification version 4.0, chapter 17. This patch provides some common functions used by more than one APEI tables, mainly framework of interpreter for EINJ and ERST. A machine readable language is defined for EINJ and ERST for OS to execute, and so to drive the firmware to fulfill the corresponding functions. The machine language for EINJ and ERST is compatible, so a common framework is defined for them. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-05-19Merge branch 'for-2.6.35' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
* 'for-2.6.35' of git://linux-nfs.org/~bfields/linux: (45 commits) Revert "nfsd4: distinguish expired from stale stateids" nfsd: safer initialization order in find_file() nfs4: minor callback code simplification, comment NFSD: don't report compiled-out versions as present nfsd4: implement reclaim_complete nfsd4: nfsd4_destroy_session must set callback client under the state lock nfsd4: keep a reference count on client while in use nfsd4: mark_client_expired nfsd4: introduce nfs4_client.cl_refcount nfsd4: refactor expire_client nfsd4: extend the client_lock to cover cl_lru nfsd4: use list_move in move_to_confirmed nfsd4: fold release_session into expire_client nfsd4: rename sessionid_lock to client_lock nfsd4: fix bare destroy_session null dereference nfsd4: use local variable in nfs4svc_encode_compoundres nfsd: further comment typos sunrpc: centralise most calls to svc_xprt_received nfsd4: fix unlikely race in session replay case nfsd4: fix filehandle comment ...
2010-05-19Merge branch 'nfs-for-2.6.35' of ↵Linus Torvalds
git://git.linux-nfs.org/projects/trondmy/nfs-2.6 * 'nfs-for-2.6.35' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (78 commits) SUNRPC: Don't spam gssd with upcall requests when the kerberos key expired SUNRPC: Reorder the struct rpc_task fields SUNRPC: Remove the 'tk_magic' debugging field SUNRPC: Move the task->tk_bytes_sent and tk_rtt to struct rpc_rqst NFS: Don't call iput() in nfs_access_cache_shrinker NFS: Clean up nfs_access_zap_cache() NFS: Don't run nfs_access_cache_shrinker() when the mask is GFP_NOFS SUNRPC: Ensure rpcauth_prune_expired() respects the nr_to_scan parameter SUNRPC: Ensure memory shrinker doesn't waste time in rpcauth_prune_expired() SUNRPC: Dont run rpcauth_cache_shrinker() when gfp_mask is GFP_NOFS NFS: Read requests can use GFP_KERNEL. NFS: Clean up nfs_create_request() NFS: Don't use GFP_KERNEL in rpcsec_gss downcalls NFSv4: Don't use GFP_KERNEL allocations in state recovery SUNRPC: Fix xs_setup_bc_tcp() SUNRPC: Replace jiffies-based metrics with ktime-based metrics ktime: introduce ktime_to_ms() SUNRPC: RPC metrics and RTT estimator should use same RTT value NFS: Calldata for nfs4_renew_done() NFS: Squelch compiler warning in nfs_add_server_stats() ...
2010-05-19Merge branch 'bkl/procfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing * 'bkl/procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing: sunrpc: Include missing smp_lock.h procfs: Kill the bkl in ioctl procfs: Push down the bkl from ioctl procfs: Use generic_file_llseek in /proc/vmcore procfs: Use generic_file_llseek in /proc/kmsg procfs: Use generic_file_llseek in /proc/kcore procfs: Kill BKL in llseek on proc base
2010-05-19Merge branch 'timers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: Add clocksource_register_hz/khz interface posix-cpu-timers: Optimize run_posix_cpu_timers() time: Remove xtime_cache mqueue: Convert message queue timeout to use hrtimers hrtimers: Provide schedule_hrtimeout for CLOCK_REALTIME timers: Introduce the concept of timer slack for legacy timers ntp: Remove tickadj ntp: Make time_adjust static time: Add xtime, wall_to_monotonic to feature-removal-schedule timer: Try to survive timer callback preempt_count leak timer: Split out timer function call timer: Print function name for timer callbacks modifying preemption count time: Clean up warp_clock() cpu-timers: Avoid iterating over all threads in fastpath_timer_check() cpu-timers: Change SIGEV_NONE timer implementation cpu-timers: Return correct previous timer reload value cpu-timers: Cleanup arm_timer() cpu-timers: Simplify RLIMIT_CPU handling
2010-05-19Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: cs5535-clockevt: Free timer in IRQ setup error path
2010-05-19Merge branch 'timers-for-linus-hpet' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hpet: Add reference to chipset erratum documentation for disable-hpet-msi-quirk x86, hpet: Restrict read back to affected ATI chipsets
2010-05-19Merge branch 'timers-for-linus-cleanups' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: avr32: Fix typo in read_persistent_clock() sparc: Convert sparc to use read/update_persistent_clock cris: Convert cris to use read/update_persistent_clock m68k: Convert m68k to use read/update_persistent_clock m32r: Convert m32r to use read/update_peristent_clock blackfin: Convert blackfin to use read/update_persistent_clock ia64: Convert ia64 to use read/update_persistent_clock avr32: Convert avr32 to use read/update_persistent_clock h8300: Convert h8300 to use read/update_persistent_clock frv: Convert frv to use read/update_persistent_clock mn10300: Convert mn10300 to use read/update_persistent_clock alpha: Convert alpha to use read/update_persistent_clock xtensa: Fix unnecessary setting of xtime time: Clean up direct xtime usage in xen
2010-05-19Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq: Clear CPU mask in affinity_hint when none is provided genirq: Add CPU mask affinity hint genirq: Remove IRQF_DISABLED from core code genirq: Run irq handlers with interrupts disabled genirq: Introduce request_any_context_irq() genirq: Expose irq_desc->node in proc/irq Fixed up trivial conflicts in Documentation/feature-removal-schedule.txt
2010-05-20i2c-highlander: remover superflous variableWolfram Sang
When cppcheck found this flaw [./i2c/busses/i2c-highlander.c:284]: (style) Warning - using char variable in bit operation it was noted that the 'read'-variable could be simply removed as read_write can only be 0 or 1 anyhow. So, we remove the flaw and simplify the code. Reported-by: d binderman <dcb314@hotmail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-ibm-iic: drop NO_IRQWolfram Sang
Drop NO_IRQ as 0 is the preferred way to describe 'no irq' (http://lkml.org/lkml/2005/11/21/221). This change is safe, as the driver is only used on powerpc, where NO_IRQ is 0 anyhow. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Cc: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-cpm: drop NO_IRQWolfram Sang
Drop NO_IRQ as 0 is the preferred way to describe 'no irq' (http://lkml.org/lkml/2005/11/21/221). This change is safe, as the driver is only used on powerpc, where NO_IRQ is 0 anyhow. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Jochen Friedrich <jochen@scram.de> Cc: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-mpc: drop NO_IRQWolfram Sang
Drop NO_IRQ as 0 is the preferred way to describe 'no irq' (http://lkml.org/lkml/2005/11/21/221). This change is safe, as the driver is only used on powerpc, where NO_IRQ is 0 anyhow. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Ben Dooks <ben-linux@fluff.org>
2010-05-20MAINTAINERS: add i2c tree for embedded platformsUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2010-05-20i2c-pxa: only define 'blue_murder'-function if DEBUG is #definedWolfram Sang
This talkative function is also called on timeouts. As timeouts can happen on regular writes to EEPROMs (no error case), this creates false positives. Giving lots of details is interesting only for developers anyhow, so just use the function if DEBUG is #defined. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Eric Miao <eric.y.miao@gmail.com> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Pavel Machek <pavel@ucw.cz>
2010-05-20i2c-pxa: remove unused macroUwe Kleine-König
Commit beea494 ([ARM] Remove EEPROM slave emulation from i2c-pxa driver.) removed all uses of eedbg, so the definition can go, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Roel Kluin <roel.kluin@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2010-05-20i2c-nomadik: fix operator precedence warningRabin Vincent
Fix this warning: i2c-nomadik.c:707: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-nomadik: release region when removedRabin Vincent
So that the module can be loaded again after an unload. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20OMAP3: I2C: Clean up Errata 1p153 handlingmanjugk manjugk
Clean up existing Errata 1p153 handling to use generic errata handling mechanism through dev flag. Signed-off-by: Manjunatha GK <manjugk@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-omap: add mpu wake up latency constraint in i2cKalle Jokiniemi
While waiting for completion of the i2c transfer, the MPU could hit OFF mode and cause several msecs of delay that made i2c transfers fail more often. The extra delays and subsequent re-trys cause i2c clocks to be active more often. This has also an negative effect on power consumption. Created a mechanism for passing and using the constraint setting function in driver code. The used mpu wake up latency constraints are now set individually per bus, and they are calculated based on clock rate and fifo size. Thanks to Jarkko Nikula, Moiz Sonasath, Paul Walmsley, and Nishanth Menon for tuning out the details of this patch. Updates by Kevin as requested by Tony: - Remove omap_set_i2c_constraint_func() in favor of conditionally adding the flag in omap_i2c_add_bus() in order to keep all the OMAP conditional checking in a single location. - Update set_mpu_wkup_lat prototypes to match OMAP PM layer so OMAP PM function can be used directly in pdata. Cc: Moiz Sonasath <m-sonasath@ti.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@digia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20OMAP2/3: I2C: Errata ID i207: Clear wrong RDR interruptmanjugk manjugk
Under certain rare conditions, I2C_STAT[13].RDR bit may be set and the corresponding interrupt fire, even there is no data in the receive FIFO, or the I2C data transfer is still ongoing. These spurious RDR events must be ignored by the software. This patch handles and ignores RDR spurious interrupts. The below sequence is required in interrupt handler for handling this errata: 1. If RDR is set to 1, clear RDR 2. Read I2C status register and check for BusBusy bit. If BusBusy bit is set, skip remaining steps. 3. If BusBusy bit is not set, perform read operation on I2C status register. 4. If RDR is set, clear the same. Check RDR again and clear if it sets RDR bit again. 5. Perform I2C Data Read operation N number of times(where N is value read from the register BUFSTAT-RXSTAT bit fields). Note: This errata is not applicable for omap2420 and omap4. It is applicable for: 1. omap2430 2. omap34xx(including omap3630). Signed-off-by: Manjunatha GK <manjugk@ti.com> Cc: Hema Kalliguddi <hemahk@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Aaro Koskinen <Aaro.Koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20omap: i2c: Add i2c support on omap4 platformSantosh Shilimkar
This patch is rebased version of earlier post to add I2C driver support to OMAP4 platform. On OMAP4, all I2C register address offsets are changed from OMAP1/2/3 I2C. In order to not have #ifdef's at various places in code, as well as to support multi-OMAP build, an array is created to hold the register addresses with it's offset. This patch was submitted, reviewed and acked on mailing list already. For more details refer below link http://www.mail-archive.com/linux-i2c@vger.kernel.org/msg02281.html This updated verion has a depedancy on "Add support for 16-bit registers" posted on linux-omap. Below is the patch-works link for the same http://patchwork.kernel.org/patch/72295/ Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Cc: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20omap: i2c: add a timeout to the busy waitingAlexander Shishkin
The errata 1.153 workaround is busy waiting on XUDF bit in interrupt context, which may lead to kernel hangs. The problem can be reproduced by running the bus with wrong (too high) speed. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20omap: i2c: make errata 1.153 workaround a separate functionAlexander Shishkin
This is to avoid insanely long lines and levels of indentation. Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Cc: Nishant Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-bfin-twi: return completion in interrupt for smbus quick transfersSonic Zhang
A smbus quick transfer has no data after the address byte. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-bfin-twi: remove redundant retrySonic Zhang
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-bfin-twi: fix lost interrupts at high speedsSonic Zhang
i2c event of next read/write byte may trigger before current int state is cleared in the interrupt handler. So, this should be done at the beginning of interrupt handler to avoid losing new i2c events. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-bfin-twi: add debug output for error statusMichael Hennerich
Add some debug() code to decode the error register. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-bfin-twi: integrate timeout timer with completion interfaceSonic Zhang
There isn't much point in managing our own custom timeout timer when the completion interface already includes support for it. This makes the resulting code much simpler and robust. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-20i2c-s3c2410: Remove unconditional 1ms delay on each transferMark Brown
The S3C I2C controller indicates completion of I2C transfers before the bus has a stop condition on it. In order to ensure that we do not attempt to start a new transfer before the bus is idle the driver currently inserts a 1ms delay. This is vastly larger than is generally required and has a visible effect on performance under load, such as when bringing up audio CODECs or reading back status information with non-bulk I2C reads. Replace the sleep with a spin on the IIC status register for up to 1ms. This will busy wait but testing on my SMDK6410 system indicates that the overwhelming majority of transactions complete on the first spin, with maximum latencies of less than 10 spins so the absolute overhead of busy waiting should be at worst comprable to msleep(), and the overall system performance is dramatically improved. The main risk is poor interaction with multimaster systems where we may miss the bus going idle before the next transaction. Defend against this by falling back to the original 1ms delay after 20 spins. The overall effect in my testing is an approximately 20% improvement in kernel startup time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19Merge branch 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msmLinus Torvalds
* 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: (72 commits) msm: 7x30 Kconfig and makefile changes msm: clock support for the MSM7x30 CPU. msm: physical offset for MSM7X30 msm: io: add io support for 7x30 msm: Add extern for 7x30 clock list. msm: dma: add 7x30 security domain abstraction msm: update basic board layout for MSM7x30 msm: add devices-msm7x30.c msm: add msm_iomap-7x30.h for MSM7x30 support msm: irqs: add irqs-7x30.h for MSM7x30 support msm: 8x50 Kconfig changes msm: physical offset for QSD8x50 msm: io: add io support for 8x50 msm: add extern for 8x50 clock list. msm: add devices-qsd8x50.c msm: update basic board layout for QSD8x50 msm: add msm_iomap-8x50.h for QSD8x50 support msm: irqs: add irqs-8x50.h for QSD8x50 support msm: timer: allow MSM_DGT_BASE to be overriden msm: add Qualcomm 7x30 interrupt controller driver. ...
2010-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Define ARCH_SLAB_MINALIGN drivers/sbus/char/flash.c: flash_read should update ppos instead of file->f_pos sparc64: Fix stack dumping and tracing when function graph is enabled. sparc64: Show stack backtrace from show_regs() just like other platforms.
2010-05-19Merge branch 'davinci-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (48 commits) Revert "rtc: omap: let device wakeup capability be configured from chip init logic" DM365: Added more PINMUX configurations for AEMIF DM365: Make CLKOUTx available DM365: Added PINMUX definitions for GPIO30..32 Davinci: iotable based ioremap() interception Davinci: pinmux - use ioremap() Davinci: aintc/cpintc - use ioremap() Davinci: psc - use ioremap() Davinci: timer - use ioremap() Davinci: jtag_id - use ioremap() Davinci: da8xx: rtc - use ioremap Davinci: gpio - use ioremap() davinci: edma: fix coding style issue related to breaking lines davinci: edma: use BIT() wherever possible davinci: edma: fix coding style issue related to usage of braces davinci: edma: use a more intuitive name for edma_info Davinci: serial - conditional reset via pwremu Davinci: serial - use ioremap() Davinci: serial - remove unnecessary define Davinci: watchdog reset separation across socs ... Fix up trivial conflict in arch/arm/Kconfig due to removal of "select GENERIC_TIME"
2010-05-19crypto: Use ARCH_KMALLOC_MINALIGN for CRYPTO_MINALIGN now that it's exposedDavid Woodhouse
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-05-19mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slub_def.h>David Woodhouse
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-05-19mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slob_def.h>David Woodhouse
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-05-19mm: Move ARCH_SLAB_MINALIGN and ARCH_KMALLOC_MINALIGN to <linux/slab_def.h>David Woodhouse
Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-05-19Merge branch 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits) Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support Input: s3c24xx_ts - Implement generic GPIO configuration callback ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen ARM: S3C64XX: Add touchscreen platform device definition ARM: SAMSUNG: Move mach/ts.h to plat/ts.h ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: gpio.h cleanup ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: Use common functions for gpiolib implementation drivers: serial: S5PC100 serial driver cleanup ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories ARM: SAMSUNG: move driver strength gpio configuration helper to common dir ARM: S5PV210: Add GPIOlib support ARM: SAMSUNGy: fix broken timer irq base ARM: SMDK6440: Add audio devices on board ARM: S5P6440: Add audio platform devices ...
2010-05-19cpumask: fix compat getaffinityKOSAKI Motohiro
Commit a45185d2d "cpumask: convert kernel/compat.c" broke libnuma, which abuses sched_getaffinity to find out NR_CPUS in order to parse /sys/devices/system/node/node*/cpumap. On NUMA systems with less than 32 possibly CPUs, the current compat_sys_sched_getaffinity now returns '4' instead of the actual NR_CPUS/8, which makes libnuma bail out when parsing the cpumap. The libnuma call sched_getaffinity(0, bitmap, 4096) at first. It mean the libnuma expect the return value of sched_getaffinity() is either len argument or NR_CPUS. But it doesn't expect to return nr_cpu_ids. Strictly speaking, userland requirement are 1) Glibc assume the return value mean the lengh of initialized of mask argument. E.g. if sched_getaffinity(1024) return 128, glibc make zero fill rest 896 byte. 2) Libnuma assume the return value can be used to guess NR_CPUS in kernel. It assume len-arg<NR_CPUS makes -EINVAL. But it try len=4096 at first and 4096 is always bigger than NR_CPUS. Then, if we remove strange min_length normalization, we never hit -EINVAL case. sched_getaffinity() already solved this issue. This patch adapts compat_sys_sched_getaffinity() to match the non-compat case. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Ken Werner <ken.werner@web.de> Cc: stable@kernel.org Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-19Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Drop duplicated "config IOMMU_HELPER" [IA64] invoke oom-killer from page fault [IA64] use __ratelimit [IA64] Use set_cpus_allowed_ptr [IA64] Use set_cpus_allowed_ptr [IA64] arch/ia64/hp/common/sba_iommu.c: Rename dev_info to adi [IA64] removing redundant ifdef
2010-05-19Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits) ARM: remove 'select GENERIC_TIME' ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO ARM: 6074/1: oprofile: convert from sysdev to platform device ARM: 6073/1: oprofile: remove old files and update KConfig ARM: 6072/1: oprofile: use perf-events framework as backend ARM: 6071/1: perf-events: allow modules to query the number of hardware counters ARM: 6070/1: perf-events: add support for xscale PMUs ARM: 6069/1: perf-events: use numeric ID to identify PMU ARM: 6064/1: pmu: register IRQs at runtime ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA ARM: 6134/1: Handle instruction cache maintenance fault properly ARM: nwfpe: allow debugging output to be configured at runtime ARM: rename mach_cpu_disable() to platform_cpu_disable() ARM: 6132/1: PL330: Add common core driver ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310 ARM: Move memory mapping into mmu.c ARM: Ensure meminfo is sorted prior to sanity_check_meminfo ARM: Remove useless linux/bootmem.h includes ARM: convert /proc/cpu/aligment to seq_file arm: use asm-generic/scatterlist.h ...
generated by cgit (git 2.34.1) at 2025-09-20 21:37:20 +0000