summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-04-01stmmac: fix MDIO settingsGiuseppe CAVALLARO
Initially the phy_bus_name was added to manipulate the driver name but it was recently just used to manage the fixed-link and then to take some decision at run-time. So the patch uses the is_pseudo_fixed_link and removes the phy_bus_name variable not necessary anymore. The driver can manage the mdio registration by using phy-handle, dwmac-mdio and own parameter e.g. snps,phy-addr. This patch takes care about all these possible configurations and fixes the mdio registration in case of there is a real transceiver or a switch (that needs to be managed by using fixed-link). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01Revert "stmmac: Fix 'eth0: No PHY found' regression"Giuseppe CAVALLARO
This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493. due to problems on GeekBox and Banana Pi M1 board when connected to a real transceiver instead of a switch via fixed-link. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Andreas Färber <afaerber@suse.de> Cc: Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01stmmac: fix TX normal DESCGiuseppe CAVALLARO
This patch fixs a regression raised when test on chips that use the normal descriptor layout. In fact, no len bits were set for the TDES1 and no OWN bit inside the TDES0. Signed-off-by: Giuseppe CAVALLARO <peppe.cavallaro@st.com> Tested-by: Andreas Färber <afaerber@suse.de> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvneta: use cache_line_size() to get cacheline sizeJisheng Zhang
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvpp2: use cache_line_size() to get cacheline sizeJisheng Zhang
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Suggested-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01net: mvpp2: fix maybe-uninitialized warningJisheng Zhang
This is to fix the following maybe-uninitialized warning: drivers/net/ethernet/marvell/mvpp2.c:6007:18: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01tun, bpf: fix suspicious RCU usage in tun_{attach, detach}_filterDaniel Borkmann
Sasha Levin reported a suspicious rcu_dereference_protected() warning found while fuzzing with trinity that is similar to this one: [ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage! [ 52.765688] other info that might help us debug this: [ 52.765695] rcu_scheduler_active = 1, debug_locks = 1 [ 52.765701] 1 lock held by a.out/1525: [ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20 [ 52.765721] stack backtrace: [ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264 [...] [ 52.765768] Call Trace: [ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8 [ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110 [ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90 [ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun] [ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun] [ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210 [ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun] [ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690 [ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60 [ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90 [ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140 [ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25 Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH, DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices. Since the fix in f91ff5b9ff52 ("net: sk_{detach|attach}_filter() rcu fixes") sk_attach_filter()/sk_detach_filter() now dereferences the filter with rcu_dereference_protected(), checking whether socket lock is held in control path. Since its introduction in 994051625981 ("tun: socket filter support"), tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the sock_owned_by_user(sk) doesn't apply in this specific case and therefore triggers the false positive. Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair that is used by tap filters and pass in lockdep_rtnl_is_held() for the rcu_dereference_protected() checks instead. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-01ext4: avoid calling dquot_get_next_id() if quota is not enabledTheodore Ts'o
This should be fixed in the quota layer so we can test with the quota mutex held, but for now, we need this to avoid tests from crashing the kernel aborting the regression test suite. Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2016-04-01drm/radeon: Only call drm_vblank_on/off between drm_vblank_init/cleanupMichel Dänzer
Prevents the if (WARN_ON(pipe >= dev->num_crtcs)) in drm_vblank_on/off from triggering if acceleration fails to initialize, in which case we call drm_vblank_cleanup. Reported-and-Tested-by: Julian Margetson <runaway@candw.ms> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amdgpu: fence wait old rcu slotChunming Zhou
since the rcu slot was initialized to be num_hw_submission, if command submission doesn't use scheduler, this limitation will be invalid like uvd test. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amdgpu: fix leaking fence in the pageflip codeChristian König
This fixes a memory leak when we can't register the callback on a fence. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amdgpu: print vram type rather than just DDRAlex Deucher
We have the info, so use it rather than reporting just DDR. Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amdgpu/gmc: use proper register for vram type on FijiAlex Deucher
The offset changed on Fiji. Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-01drm/amdgpu/gmc: move vram type fetching into sw_initAlex Deucher
early_init gets called before atom asic init so on non-posted cards, the vram type is not initialized. Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-01drm/amdgpu: Set vblank_disable_allowed = trueMichel Dänzer
Without this, since the conversion from drm_vblank_pre/post_modeset to drm_vblank_on/off, the vblank interrupt could never be disabled after userspace triggered enabling it. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/radeon: Set vblank_disable_allowed = trueMichel Dänzer
Without this, since the conversion from drm_vblank_pre/post_modeset to drm_vblank_on/off, the vblank interrupt could never be disabled after userspace triggered enabling it. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amd/powerplay: Need to change boot to performance state in resume.Rex Zhu
Fixes slow performance on resume. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amd/powerplay: add new Fiji function for not setting same ps.Rex Zhu
Add comparison function used by powerplay to determine which power state to select. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amdgpu: check dpm state before pm system fs initialized.Rex Zhu
Make sure powerplay initialized properly before enabling debugfs pm files. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed- by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amd/powerplay: notify amdgpu whether dpm is enabled or not.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amdgpu: Not support disable dpm in powerplay.Rex Zhu
We don't support the dpm parameter in powerplay. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amdgpu: add an cgs interface to notify amdgpu the dpm state.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2016-04-01drm/amd/powerplay: fix segment fault issue in multi-display case.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-04-01Revert "Revert "pinctrl: lantiq: Implement gpio_chip.to_irq""Linus Walleij
This reverts commit 446f59acb70b70a425ea4105277a71eb615327cd.
2016-04-01Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Nothing too crazy in here: a bunch of AMD fixes/quirks, two msm fixes, some rockchip fixes, and a udl warning fix, along with one locking fix for displayport that seems to fix some dodgy monitors" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/udl: Use unlocked gem unreferencing drm/dp: move hw_mutex up the call stack drm/amdgpu: Don't move pinned BOs drm/radeon: Don't move pinned BOs drm/radeon: add a dpm quirk for all R7 370 parts drm/radeon: add another R7 370 quirk drm/rockchip: dw_hdmi: Don't call platform_set_drvdata() drm/rockchip: vop: Fix vop crtc cleanup drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path drm/rockchip: vop: Disable planes when disabling CRTC drm/rockchip: vop: Don't reject empty modesets drm/rockchip: cancel pending vblanks on close drm/rockchip: vop: fix crtc size in plane check drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5 drm/amd: Beef up ACP Kconfig menu text drm/msm: fix typo in the !COMMON_CLK case drm/msm: fix bug after preclose removal
2016-04-01Merge tag 'powerpc-4.6-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fixup preempt underflow with huge pages from Sebastian Siewior - Fix altivec SPR not being saved from Oliver O'Halloran - Correct used_vsr comment from Simon Guo * tag 'powerpc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Correct used_vsr comment powerpc/process: Fix altivec SPR not being saved powerpc/mm: Fixup preempt underflow with huge pages
2016-04-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A proper fix for the locking issue in the dasd driver - Wire up the new preadv2 nad pwritev2 system calls - Add the mark_rodata_ro function and set DEBUG_RODATA=y - A few more bug fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up preadv2/pwritev2 syscalls s390/pci: PCI function group 0 is valid for clp_query_pci_fn s390/crypto: provide correct file mode at device register. s390/mm: handle PTE-mapped tail pages in fast gup s390: add DEBUG_RODATA support s390: disable postinit-readonly for now s390/dasd: reorder lcu and device lock s390/cpum_sf: Fix cpu hotplug notifier transitions s390/cpum_cf: Fix missing cpu hotplug notifier transition
2016-04-01ALSA: timer: Use mod_timer() for rearming the system timerTakashi Iwai
ALSA system timer backend stops the timer via del_timer() without sync and leaves del_timer_sync() at the close instead. This is because of the restriction by the design of ALSA timer: namely, the stop callback may be called from the timer handler, and calling the sync shall lead to a hangup. However, this also triggers a kernel BUG() when the timer is rearmed immediately after stopping without sync: kernel BUG at kernel/time/timer.c:966! Call Trace: <IRQ> [<ffffffff8239c94e>] snd_timer_s_start+0x13e/0x1a0 [<ffffffff8239e1f4>] snd_timer_interrupt+0x504/0xec0 [<ffffffff8122fca0>] ? debug_check_no_locks_freed+0x290/0x290 [<ffffffff8239ec64>] snd_timer_s_function+0xb4/0x120 [<ffffffff81296b72>] call_timer_fn+0x162/0x520 [<ffffffff81296add>] ? call_timer_fn+0xcd/0x520 [<ffffffff8239ebb0>] ? snd_timer_interrupt+0xec0/0xec0 .... It's the place where add_timer() checks the pending timer. It's clear that this may happen after the immediate restart without sync in our cases. So, the workaround here is just to use mod_timer() instead of add_timer(). This looks like a band-aid fix, but it's a right move, as snd_timer_interrupt() takes care of the continuous rearm of timer. Reported-by: Jiri Slaby <jslaby@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-01kvm: set page dirty only if page has been writableYu Zhao
In absence of shadow dirty mask, there is no need to set page dirty if page has never been writable. This is a tiny optimization but good to have for people who care much about dirty page tracking. Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01KVM: x86: reduce default value of halt_poll_ns parameterPaolo Bonzini
Windows lets applications choose the frequency of the timer tick, and in Windows 10 the maximum rate was changed from 1024 Hz to 2048 Hz. Unfortunately, because of the way the Windows API works, most applications who need a higher rate than the default 64 Hz will just do timeGetDevCaps(&tc, sizeof(tc)); timeBeginPeriod(tc.wPeriodMin); and pick the maximum rate. This causes very high CPU usage when playing media or games on Windows 10, even if the guest does not actually use the CPU very much, because the frequent timer tick causes halt_poll_ns to kick in. There is no really good solution, especially because Microsoft could sooner or later bump the limit to 4096 Hz, but for now the best we can do is lower a bit the upper limit for halt_poll_ns. :-( Reported-by: Jon Panozzo <jonp@lime-technology.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01KVM: Hyper-V: do not do hypercall userspace exits if SynIC is disabledPaolo Bonzini
If SynIC is disabled, there is nothing that userspace can do to handle these exits; on the other hand, userspace probably will not know about KVM_EXIT_HYPERV_HCALL and complain about it or even exit. Just prevent anything bad from happening by handling the hypercall in KVM and returning an "invalid hypercall" code. Fixes: 83326e43f27e9a8a501427a0060f8af519a39bb2 Cc: Andrey Smetanin <irqlevel@gmail.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01KVM: x86: Inject pending interrupt even if pending nmi existYuki Shibuya
Non maskable interrupts (NMI) are preferred to interrupts in current implementation. If a NMI is pending and NMI is blocked by the result of nmi_allowed(), pending interrupt is not injected and enable_irq_window() is not executed, even if interrupts injection is allowed. In old kernel (e.g. 2.6.32), schedule() is often called in NMI context. In this case, interrupts are needed to execute iret that intends end of NMI. The flag of blocking new NMI is not cleared until the guest execute the iret, and interrupts are blocked by pending NMI. Due to this, iret can't be invoked in the guest, and the guest is starved until block is cleared by some events (e.g. canceling injection). This patch injects pending interrupts, when it's allowed, even if NMI is blocked. And, If an interrupts is pending after executing inject_pending_event(), enable_irq_window() is executed regardless of NMI pending counter. Cc: stable@vger.kernel.org Signed-off-by: Yuki Shibuya <shibuya.yk@ncos.nec.co.jp> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-04-01Merge tag 'kvm-arm-for-4.6-rc2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Fixes for Linux v4.6-rc2. Fixes a bug that corrupts stage-2 translationson 16-bit VMID equipped systems and fixes CPU PM and Hotplug after the EL2 init code has been moved to C.
2016-04-01s390: wire up preadv2/pwritev2 syscallsHeiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-01s390/pci: PCI function group 0 is valid for clp_query_pci_fnPierre Morel
The PCI function group 0 is a valid function group, it is wrong to reject it. Let's accept PCI function group 0. Signed-off-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-04-01MAINTAINERS: Update my email addressMasami Hiramatsu
Since I moved to Linaro, this old address doesn't work anymore. I'll use my kernel.org account for upstreaming. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@redhat.com Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1459431203-7438-1-git-send-email-mhiramat@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-01ext4: retry block allocation for failed DIO and DAX writesJan Kara
Currently if block allocation for DIO or DAX write fails due to ENOSPC, we just returned it to userspace. However these ENOSPC errors can be transient because the transaction freeing blocks has not yet committed. This demonstrates as failures of generic/102 test when the filesystem is mounted with 'dax' mount option. Fix the problem by properly retrying the allocation in case of ENOSPC error in get blocks functions used for direct IO. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com>
2016-04-01ALSA: hda - fix front mic problem for a HP desktopHui Wang
The front mic jack (pink color) can't detect any plug or unplug. After applying this fix, both detecting function and recording function work well. BugLink: https://bugs.launchpad.net/bugs/1564712 Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-01ext4: add lockdep annotations for i_data_semTheodore Ts'o
With the internal Quota feature, mke2fs creates empty quota inodes and quota usage tracking is enabled as soon as the file system is mounted. Since quotacheck is no longer preallocating all of the blocks in the quota inode that are likely needed to be written to, we are now seeing a lockdep false positive caused by needing to allocate a quota block from inside ext4_map_blocks(), while holding i_data_sem for a data inode. This results in this complaint: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem); lock(&s->s_dquot.dqio_mutex); lock(&ei->i_data_sem); lock(&s->s_dquot.dqio_mutex); Google-Bug-Id: 27907753 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2016-04-01drm/udl: Use unlocked gem unreferencingDaniel Vetter
For drm_gem_object_unreference callers are required to hold dev->struct_mutex, which these paths don't. Enforcing this requirement has become a bit more strict with commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 15 09:36:25 2015 +0200 drm/gem: Check locking in drm_gem_object_unreference Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-01drm/dp: move hw_mutex up the call stackRob Clark
1) don't let other threads trying to bang on aux channel interrupt the defer timeout/logic 2) don't let other threads interrupt the i2c over aux logic Technically, according to people who actually have the DP spec, this should not be required. In practice, it makes some troublesome Dell monitor (and perhaps others) work, so probably a case of "It's compliant if it works with windows" on the hw vendor's part.. v2: rebased to come before DPCD/AUX logging patch for easier backport to stable branches. Reported-by: Dave Wysochanski <dwysocha@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1274157 Cc: stable@vger.kernel.org Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-04-01Merge branch 'drm-rockchip-next-fixes-2016-03-28' of ↵Dave Airlie
https://github.com/markyzq/kernel-drm-rockchip into drm-fixes bunch of rockchip fixes. * 'drm-rockchip-next-fixes-2016-03-28' of https://github.com/markyzq/kernel-drm-rockchip: drm/rockchip: dw_hdmi: Don't call platform_set_drvdata() drm/rockchip: vop: Fix vop crtc cleanup drm/rockchip: dw_hdmi: Call drm_encoder_cleanup() in error path drm/rockchip: vop: Disable planes when disabling CRTC drm/rockchip: vop: Don't reject empty modesets drm/rockchip: cancel pending vblanks on close drm/rockchip: vop: fix crtc size in plane check
2016-04-01Merge branch 'msm-fixes-4.6-rc1' of ↵Dave Airlie
git://people.freedesktop.org/~robclark/linux into drm-fixes two minor msm fixes. * 'msm-fixes-4.6-rc1' of git://people.freedesktop.org/~robclark/linux: drm/msm: fix typo in the !COMMON_CLK case drm/msm: fix bug after preclose removal
2016-04-01Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Just a few fixes for 4.6 this week: - Add some SI DPM quirks - Improve the ACP Kconfig text - Additional BO pinning checks * 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: Don't move pinned BOs drm/radeon: Don't move pinned BOs drm/radeon: add a dpm quirk for all R7 370 parts drm/radeon: add another R7 370 quirk drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5 drm/amd: Beef up ACP Kconfig menu text
2016-03-31net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband cardDaniele Palmas
Telit LE910 V2 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31rtnl: fix msg size calculation in if_nlmsg_size()Nicolas Dichtel
Size of the attribute IFLA_PHYS_PORT_NAME was missing. Fixes: db24a9044ee1 ("net: add support for phys_port_name") CC: David Ahern <dsahern@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31fec: Do not access unexisting register in ColdfireFabio Estevam
Commit 55cd48c821de ("net: fec: stop the "rcv is not +last, " error messages") introduces a write to a register that does not exist in Coldfire. Move the FEC_FTRL register access inside the FEC_QUIRK_HAS_RACC 'if' block, so that we guarantee it will not be used on Coldfire CPUs. Reported-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: mvneta: replace MVNETA_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTESJisheng Zhang
The mvneta is also used in some Marvell berlin family SoCs which may have 64bytes cacheline size. Replace the MVNETA_CPU_D_CACHE_LINE_SIZE usage with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: mvpp2: replace MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTESJisheng Zhang
The mvpp2 ip maybe used in SoCs which may have have 64bytes cacheline size. Replace the MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: dsa: mv88e6xxx: Clear the PDOWN bit on setupPatrick Uiterwijk
Some of the vendor-specific bootloaders set up this part of the initialization for us, so this was never added. However, since upstream bootloaders don't initialize the chip specifically, they leave the fiber MII's PDOWN flag set, which means that the CPU port doesn't connect. This patch checks whether this flag has been clear prior by something else, and if not make us clear it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-11 19:17:33 +0000