summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-01-25Merge branch 'nfp-flower-a-few-small-conntrack-offload-fixes'Jakub Kicinski
Louis Peens says: ==================== nfp: flower: a few small conntrack offload fixes This small series addresses two bugs in the nfp conntrack offloading code. The first patch is a check to prevent offloading for a case which is currently not supported by the nfp. The second patch fixes up parsing of layer4 mangling code so it can be correctly offloaded. Since the masks are an inverse mask and we are shifting it so it can be packed together with the destination we effectively need to 'clear' the lower bits of the mask by setting it to 0xFFFF. ==================== Link: https://lore.kernel.org/r/20240124151909.31603-1-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25nfp: flower: fix hardware offload for the transfer layer portHui Zhou
The nfp driver will merge the tp source port and tp destination port into one dword which the offset must be zero to do hardware offload. However, the mangle action for the tp source port and tp destination port is separated for tc ct action. Modify the mangle action for the FLOW_ACT_MANGLE_HDR_TYPE_TCP and FLOW_ACT_MANGLE_HDR_TYPE_UDP to satisfy the nfp driver offload check for the tp port. The mangle action provides a 4B value for source, and a 4B value for the destination, but only 2B of each contains the useful information. For offload the 2B of each is combined into a single 4B word. Since the incoming mask for the source is '0xFFFF<mask>' the shift-left will throw away the 0xFFFF part. When this gets combined together in the offload it will clear the destination field. Fix this by setting the lower bits back to 0xFFFF, effectively doing a rotate-left operation on the mask. Fixes: 5cee92c6f57a ("nfp: flower: support hw offload for ct nat action") CC: stable@vger.kernel.org # 6.1+ Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-3-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25nfp: flower: add hardware offload check for post ct entryHui Zhou
The nfp offload flow pay will not allocate a mask id when the out port is openvswitch internal port. This is because these flows are used to configure the pre_tun table and are never actually send to the firmware as an add-flow message. When a tc rule which action contains ct and the post ct entry's out port is openvswitch internal port, the merge offload flow pay with the wrong mask id of 0 will be send to the firmware. Actually, the nfp can not support hardware offload for this situation, so return EOPNOTSUPP. Fixes: bd0fe7f96a3c ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows") CC: stable@vger.kernel.org # 5.14+ Signed-off-by: Hui Zhou <hui.zhou@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-2-louis.peens@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25gve: Fix skb truesize underestimationPraveen Kaligineedi
For a skb frag with a newly allocated copy page, the true size is incorrectly set to packet buffer size. It should be set to PAGE_SIZE instead. Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path") Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20240124161025.1819836-1-pkaligineedi@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25selftests/net/lib: update busywait timeout valueHangbin Liu
The busywait timeout value is a millisecond, not a second. So the current setting 2 is too small. On slow/busy host (or VMs) the current timeout can expire even on "correct" execution, causing random failures. Let's copy the WAIT_TIMEOUT from forwarding/lib.sh and set BUSYWAIT_TIMEOUT here. Fixes: 25ae948b4478 ("selftests/net: add lib.sh") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240124061344.1864484-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25bcachefs: __lookup_dirent() works in snapshot, not subvolKent Overstreet
Add a new helper, bch2_hash_lookup_in_snapshot(), for when we're not operating in a subvolume and already have a snapshot ID, and then use it in lookup_lostfound() -> __lookup_dirent(). This is a bugfix - lookup_lostfound() doesn't take a subvolume ID, we were passing a nonsense subvolume ID before, and don't have one to pass since we may be operating in an interior snapshot node that doesn't have a subvolume ID. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-25Merge tag 'md-6.8-20240126' of ↵Jens Axboe
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-6.8 Pull MD fix from Song: "This change fixes a RCU warning." * tag 'md-6.8-20240126' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix a suspicious RCU usage warning
2024-01-25selftests: tcp_ao: set the timeout to 2 minutesJakub Kicinski
The default timeout for tests is 45sec, bench-lookups_ipv6 seems to take around 50sec when running in a VM without HW acceleration. Give it a 2x margin and set the timeout to 120sec. Fixes: d1066c9c58d4 ("selftests/net: Add test/benchmark for removing MKTs") Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20240124233630.1977708-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25Merge branch 'selftests-net-a-few-fixes'Jakub Kicinski
Paolo Abeni says: ==================== selftests: net: a few fixes This series address self-tests failures for udp gro-related tests. The first patch addresses the main problem I observe locally - the XDP program required by such tests, xdp_dummy, is currently build in the ebpf self-tests directory, not available if/when the user targets net only. Arguably is more a refactor than a fix, but still targeting net to hopefully The second patch fixes the integration of such tests with the build system. Patch 3/3 fixes sporadic failures due to races. Tested with: make -C tools/testing/selftests/ TARGETS=net install ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t "net:udpgro_bench.sh net:udpgro.sh net:udpgro_fwd.sh \ net:udpgro_frglist.sh net:veth.sh" no failures. ==================== Link: https://lore.kernel.org/r/cover.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25selftests: net: explicitly wait for listener readyPaolo Abeni
The UDP GRO forwarding test still hard-code an arbitrary pause to wait for the UDP listener becoming ready in background. That causes sporadic failures depending on the host load. Replace the sleep with the existing helper waiting for the desired port being exposed. Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25selftests: net: included needed helper in the install targetsPaolo Abeni
The blamed commit below introduce a dependency in some net self-tests towards a newly introduce helper script. Such script is currently not included into the TEST_PROGS_EXTENDED list and thus is not installed, causing failure for the relevant tests when executed from the install dir. Fix the issue updating the install targets. Fixes: 3bdd9fd29cb0 ("selftests/net: synchronize udpgro tests' tx and rx connection") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/076e8758e21ff2061cc9f81640e7858df775f0a9.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25selftests: net: remove dependency on ebpf testsPaolo Abeni
Several net tests requires an XDP program build under the ebpf directory, and error out if such program is not available. That makes running successful net test hard, let's duplicate into the net dir the [very small] program, re-using the existing rules to build it, and finally dropping the bogus dependency. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/28e7af7c031557f691dc8045ee41dd549dd5e74c.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25selftests: tcp_ao: add a config fileJakub Kicinski
Still a bit unclear whether each directory should have its own config file, but assuming they should lets add one for tcp_ao. The following tests still fail with this config in place: - rst_ipv4, - rst_ipv6, - bench-lookups_ipv6. other 21 pass. Fixes: d11301f65977 ("selftests/net: Add TCP-AO ICMPs accept test") Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20240124192550.1865743-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-25drm/msm/mdss: specify cfg bandwidth for SDM670Dmitry Baryshkov
Lower the requested CFG bus bandwidth for the SDM670 platform. The default value is 153600 kBps, which is twice as big as required by the platform according to the vendor kernel. Fixes: a55c8ff252d3 ("drm/msm/mdss: Handle the reg bus ICC path") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Richard Acayan <mailingradian@gmail.com> Patchwork: https://patchwork.freedesktop.org/patch/572182/ Link: https://lore.kernel.org/r/20231215013222.827975-1-dmitry.baryshkov@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-01-25spi: fix finalize message on error returnDavid Lechner
In __spi_pump_transfer_message(), the message was not finalized in the first error return as it is in the other error return paths. Not finalizing the message could cause anything waiting on the message to complete to hang forever. This adds the missing call to spi_finalize_current_message(). Fixes: ae7d2346dc89 ("spi: Don't use the message queue if possible in spi_sync") Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://msgid.link/r/20240125205312.3458541-2-dlechner@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd: Add a DC debug mask for IPSRoman Li
For debugging IPS-related issues, expose a new debug mask that allows to disable IPS. Usage: amdgpu.dcdebugmask=0x800 Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Replay + IPS + ABM in Full Screen VPBChunTao Tso
[Why] Because ABM will wait VStart to start getting histogram data, it will cause we can't enter IPS while full screnn video playing. [How] Modify the panel refresh rate to the maximun multiple of current refresh rate. Reviewed-by: Dennis Chan <dennis.chan@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: ChunTao Tso <chuntao.tso@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add IPS checks before dcn register accessRoman Li
[Why] With IPS enabled a system hangs once PSR is active. PSR active triggers transition to IPS2 state. While in IPS2 an access to dcn registers results in hard hang. Existing check doesn't cover for PSR sequence. [How] Safeguard register access by disabling idle optimization in atomic commit and crtc scanout. It will be re-enabled on next vblank. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Add Replay IPS register for DMUB command tableAlvin Lee
- Introduce a new Replay mode for DMUB version 0.0.199.0 Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Allow IPS2 during ReplayNicholas Kazlauskas
[Why & How] Add regkey to block video playback in IPS2 by default Allow idle optimizations in the same spot we allow Replay for video playback usecases. Avoid sending it when there's an external display connected by modifying the allow idle checks to check for active non-eDP screens. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/amdgpu: Assign GART pages to AMD device mappingTom St Denis
This allows kernel mapped pages like the PDB and PTB to be read via the iomem debugfs when there is no vram in the system. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: Fetch current power limit from FWLijo Lazar
Power limit of SMUv13.0.6 SOCs can be updated by out-of-band ways. Fetch the limit from firmware instead of using cached values. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu: Fix null pointer dereferenceHawking Zhang
amdgpu_reg_state_sysfs_fini could be invoked at the time when asic_func is even not initialized, i.e., amdgpu_discovery_init fails for some reason. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Show vram vendor only if availableLijo Lazar
Ony if vram vendor info is available, show in sysfs. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amd/pm: update the power cap settingKenneth Feng
update the power cap setting for smu_v13.0.0/smu_v13.0.7 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2356 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu: Avoid fetching vram vendor informationLijo Lazar
For GFX 9.4.3 APUs, the current method of fetching vram vendor information is not reliable. Avoid fetching the information. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.7.x
2024-01-25drm/amdgpu/pm: Fix the power source flag errorMa Jun
The power source flag should be updated when [1] System receives an interrupt indicating that the power source has changed. [2] System resumes from suspend or runtime suspend Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() ↵Srinivasan Shanmugam
& write_dpcd()' functions The 'status' variable in 'core_link_read_dpcd()' & 'core_link_write_dpcd()' was uninitialized. Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'. drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'. Cc: stable@vger.kernel.org Cc: Jerry Zuo <jerry.zuo@amd.com> Cc: Jun Lei <Jun.Lei@amd.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/pm: udpate smu v13.0.6 message permissionYang Wang
update smu v13.0.6 message to allow guest driver set gfx clock. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25arm64: dts: rockchip: mark system power controller on rk3588-evb1Sebastian Reichel
Mark the primary PMIC as system-power-controller, so that the system properly shuts down on poweroff. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20240117191555.86138-1-sebastian.reichel@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-01-25amdgpu/drm: Use vram manager for virtualization page retirementVictor Skvortsov
In runtime, use vram manager for virtualization page retirement. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Add RAS_POISON_READY host response messageVictor Skvortsov
In a non-FLR page avoidance scenario, the host driver will provide the bad pages in the pf2vf exchange region. Adding a new host response message to indicate when the pf2vf exchange region has been updated. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Support passing poison consumption ras block to SRIOVYiPeng Chai
Support passing poison consumption ras blocks to SRIOV. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: "Enable IPS by default"Roman Li
[Why] IPS was temporary disabled due to instability. It was fixed in dmub firmware and with: - "drm/amd/display: Add IPS checks before dcn register access" - "drm/amd/display: Disable ips before dc interrupt setting" [How] Enable IPS by default. Disable IPS if 0x800 bit set in amdgpu.dcdebugmask module params Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd: Add a DC debug mask for IPSRoman Li
For debugging IPS-related issues, expose a new debug mask that allows to disable IPS. Usage: amdgpu.dcdebugmask=0x800 Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Disable ips before dc interrupt settingRoman Li
[Why] While in IPS2 an access to dcn registers is not allowed. If interrupt results in dc call, we should disable IPS. [How] Safeguard register access in IPS2 by disabling idle optimization before calling dc interrupt setting api. Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Mark Broadworth <mark.broadworth@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: adjust aca init/fini sequence to match gpu resetYang Wang
- move aca init/fini function into ras init/fini to adapt gpu reset sequence. - add new function amdgpu_aca_reset() Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: add aca sysfs remove supportYang Wang
add aca sysfs remove support. Fixes: 37973b69eab4 ("drm/amdgpu: add aca sysfs support") Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amd/display: Fix a potential buffer overflow in 'dp_dsc_clock_en_read()'Srinivasan Shanmugam
Tell snprintf() to store at most 10 bytes in the output buffer instead of 30. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_debugfs.c:1508 dp_dsc_clock_en_read() error: snprintf() is printing too much 30 vs 10 Fixes: c06e09b76639 ("drm/amd/display: Add DSC parameters logging to debugfs") Cc: Alex Hung <alex.hung@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Fix module unload hang with RAS enabledMukul Joshi
The driver unload hangs because the page retirement kthread cannot be stopped as it is sleeping and waiting on page retirement event to occur. Add kthread_should_stop() to the event condition to wake up the kthread when kthread stop is called during driver unload. Fixes: 3fdcd0a31d7a ("drm/amdgpu: Prepare for asynchronous processing of umc page retirement") Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/pm: Add default case for smu IH process funcMa Jun
Add default case for smu IH process func. Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: convert some variable sized arrays to [] styleAlex Deucher
Replace [1] with []. Silences UBSAN warnings. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3107 Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDsAlex Deucher
This needs to be set to 1 to avoid a potential deadlock in the GC 10.x and newer. On GC 9.x and older, this needs to be set to 0. This can lead to hangs in some mixed graphics and compute workloads. Updated firmware is also required for AQL. Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-01-25drm/amd/amdgpu: Assign GART pages to AMD device mappingTom St Denis
This allows kernel mapped pages like the PDB and PTB to be read via the iomem debugfs when there is no vram in the system. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-25drm/amdgpu: Fix return type in 'aca_bank_hwip_is_matched()'Srinivasan Shanmugam
Change the return type of "if (!bank || type == ACA_HWIP_TYPE_UNKNOW)" to be bool instead of int. Fixes the below: drivers/gpu/drm/amd/amdgpu/amdgpu_aca.c:185 aca_bank_hwip_is_matched() warn: signedness bug returning '(-22)' Fixes: f5e4cc8461c4 ("drm/amdgpu: implement RAS ACA driver framework") Cc: Yang Wang <kevinyang.wang@amd.com> Cc: Hawking Zhang <Hawking.Zhang@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>