| Age | Commit message (Collapse) | Author |
|---|
|
On HSW non-ULT (or at least on Dell Latitude E6540) external displays
start to flicker when we enable PSR on the eDP. We observe a much higher
SR and PC6 residency than should be possible with an external display,
and indeen much higher than what we observe with eDP disabled and
only the external display enabled. Looks like the hardware is somehow
ignoring the fact that the external display is active during PSR.
I wasn't able to redproduce this on my HSW ULT machine, or BDW.
So either there's something specific about this particular laptop
(eg. some unknown firmware thing) or the issue is limited to just
non-ULT HSW systems. All known registers that could affect this
look perfectly reasonable on the affected machine.
As a workaround let's unmask the LPSP event to prevent PSR entry
except while in LPSP mode (only pipe A + eDP active). This
will prevent PSR entry entirely when multiple pipes are active.
The one slight downside is that we now also prevent PSR entry
when driving eDP with pipe B or C, but I think that's a reasonable
tradeoff to avoid having to implement a more complex workaround.
Cc: stable@vger.kernel.org
Fixes: 783d8b80871f ("drm/i915/psr: Re-enable PSR1 on hsw/bdw")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10092
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118212131.31868-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
|
|
This information is already present at
/sys/kernel/debug/dri/0/gt0/uc/guc_log if needed.
v2: add missing chunk
v3: remove spurious line
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118214856.399952-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The DT of_device.h and of_platform.h headers date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. The headers also include
platform_device.h and of.h. The result was lots of drivers relied on
these implicit includes.
Now the entire tree has been fixed over the last couple of cycles to
explicitly include the necessary headers instead of relying on
of_device.h and/or of_platform.h implicit includes, so the implicit and
circular includes can finally be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h.
of_device.h isn't needed, but mod_devicetable.h and platform_device.h
were implicitly included.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Link: https://lore.kernel.org/r/20231211160510.0aef871b@canb.auug.org.au
[robh: Redo commit msg]
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h.
of_device.h isn't needed, but mod_devicetable.h and property.h were
implicitly included.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Error checking for matching and match data was not necessary as matching
is always successful if we're already in probe and the match tables always
have data pointers.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Print xe->info.skip_guc_pc in xe info
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119131025.1872947-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'name'
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c: In function ‘dw_hdma_v0_debugfs_on’:
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c:125:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
125 | snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i);
| ^~
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c: In function ‘dw_hdma_v0_debugfs_on’:
drivers/dma/dw-edma/dw-hdma-v0-debugfs.c:142:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
142 | snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i);
| ^~
drivers/dma/dw-edma/dw-edma-v0-debugfs.c: In function ‘dw_edma_debugfs_regs_wr’:
drivers/dma/dw-edma/dw-edma-v0-debugfs.c:193:50: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 8 [-Werror=format-truncation=]
193 | snprintf(name, sizeof(name), "%s:%d", CHANNEL_STR, i);
| ^~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'irq_name'
drivers/dma/fsl-qdma.c: In function ‘fsl_qdma_irq_init’:
drivers/dma/fsl-qdma.c:824:46: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~
drivers/dma/fsl-qdma.c:824:35: note: directive argument in the range [-2147483641, 2147483646]
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~~~~~~~~~~~~~
drivers/dma/fsl-qdma.c:824:17: note: ‘sprintf’ output between 12 and 22 bytes into a destination of size 20
824 | sprintf(irq_name, "qdma-queue%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We seem to have hit warnings of 'output may be truncated' which is fixed
by increasing the size of 'dev_id'
drivers/dma/sh/shdmac.c: In function ‘sh_dmae_probe’:
drivers/dma/sh/shdmac.c:541:34: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~
In function ‘sh_dmae_chan_probe’,
inlined from ‘sh_dmae_probe’ at drivers/dma/sh/shdmac.c:845:9:
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 2147483647]
541 | "sh-dmae%d.%d", pdev->id, id);
| ^~~~~~~~~~~~~~
drivers/dma/sh/shdmac.c:541:26: note: directive argument in the range [0, 19]
drivers/dma/sh/shdmac.c:540:17: note: ‘snprintf’ output between 11 and 21 bytes into a destination of size 16
540 | snprintf(sh_chan->dev_id, sizeof(sh_chan->dev_id),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
541 | "sh-dmae%d.%d", pdev->id, id);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
All of the attributes, as well as the array of attributes, can be const
and placed in rodata.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117122044.1544174-5-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Place the function pointers in rodata.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117122044.1544174-4-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Make hwmon_info a const array of const pointers, and let it be placed in
rodata.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117122044.1544174-3-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
The irq_chip definition can be const, make it so.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117122044.1544174-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Place the function pointers in rodata. Also drop the extra declaration
while at it.
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117122044.1544174-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Replace hyphens with colons where necessary.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312230634.3AIMQ3OP-lkp@intel.com/
Signed-off-by: Jan Kuliga <jankul@alatek.krakow.pl>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20231222231728.7156-1-jankul@alatek.krakow.pl
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
gcc points out that the fix-byte buffer might be too small:
drivers/dma/sh/usb-dmac.c: In function 'usb_dmac_probe':
drivers/dma/sh/usb-dmac.c:720:34: warning: '%u' directive writing between 1 and 10 bytes into a region of size 3 [-Wformat-overflow=]
720 | sprintf(pdev_irqname, "ch%u", index);
| ^~
In function 'usb_dmac_chan_probe',
inlined from 'usb_dmac_probe' at drivers/dma/sh/usb-dmac.c:814:9:
drivers/dma/sh/usb-dmac.c:720:31: note: directive argument in the range [0, 4294967294]
720 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~
drivers/dma/sh/usb-dmac.c:720:9: note: 'sprintf' output between 4 and 13 bytes into a destination of size 5
720 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Maximum number of channels for USB-DMAC as per the driver is 1-99 so use
u8 instead of unsigned int/int for DMAC channel indexing and make the
pdev_irqname string long enough to avoid the warning.
While at it use scnprintf() instead of sprintf() to make the code more
robust.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240110222210.193479-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A crash was found when dumping SMC-D connections. It can be reproduced
by following steps:
- run nginx/wrk test:
smc_run nginx
smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL>
- continuously dump SMC-D connections in parallel:
watch -n 1 'smcss -D'
BUG: kernel NULL pointer dereference, address: 0000000000000030
CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E 6.7.0+ #55
RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x66/0x150
? exc_page_fault+0x69/0x140
? asm_exc_page_fault+0x26/0x30
? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag]
? __kmalloc_node_track_caller+0x35d/0x430
? __alloc_skb+0x77/0x170
smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
smc_diag_dump+0x26/0x60 [smc_diag]
netlink_dump+0x19f/0x320
__netlink_dump_start+0x1dc/0x300
smc_diag_handler_dump+0x6a/0x80 [smc_diag]
? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
sock_diag_rcv_msg+0x121/0x140
? __pfx_sock_diag_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
sock_diag_rcv+0x28/0x40
netlink_unicast+0x22a/0x330
netlink_sendmsg+0x1f8/0x420
__sock_sendmsg+0xb0/0xc0
____sys_sendmsg+0x24e/0x300
? copy_msghdr_from_user+0x62/0x80
___sys_sendmsg+0x7c/0xd0
? __do_fault+0x34/0x160
? do_read_fault+0x5f/0x100
? do_fault+0xb0/0x110
? __handle_mm_fault+0x2b0/0x6c0
__sys_sendmsg+0x4d/0x80
do_syscall_64+0x69/0x180
entry_SYSCALL_64_after_hwframe+0x6e/0x76
It is possible that the connection is in process of being established
when we dump it. Assumed that the connection has been registered in a
link group by smc_conn_create() but the rmb_desc has not yet been
initialized by smc_buf_create(), thus causing the illegal access to
conn->rmb_desc. So fix it by checking before dump.
Fixes: 4b1b7d3b30a6 ("net/smc: add SMC-D diag support")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jiri Slaby reported a futex state inconsistency resulting in -EINVAL during
a lock operation for a PI futex. It requires that the a lock process is
interrupted by a timeout or signal:
T1 Owns the futex in user space.
T2 Tries to acquire the futex in kernel (futex_lock_pi()). Allocates a
pi_state and attaches itself to it.
T2 Times out and removes its rt_waiter from the rt_mutex. Drops the
rtmutex lock and tries to acquire the hash bucket lock to remove
the futex_q. The lock is contended and T2 schedules out.
T1 Unlocks the futex (futex_unlock_pi()). Finds a futex_q but no
rt_waiter. Unlocks the futex (do_uncontended) and makes it available
to user space.
T3 Acquires the futex in user space.
T4 Tries to acquire the futex in kernel (futex_lock_pi()). Finds the
existing futex_q of T2 and tries to attach itself to the existing
pi_state. This (attach_to_pi_state()) fails with -EINVAL because uval
contains the TID of T3 but pi_state points to T1.
It's incorrect to unlock the futex and make it available for user space to
acquire as long as there is still an existing state attached to it in the
kernel.
T1 cannot hand over the futex to T2 because T2 already gave up and started
to clean up and is blocked on the hash bucket lock, so T2's futex_q with
the pi_state pointing to T1 is still queued.
T2 observes the futex_q, but ignores it as there is no waiter on the
corresponding rt_mutex and takes the uncontended path which allows the
subsequent caller of futex_lock_pi() (T4) to observe that stale state.
To prevent this the unlock path must dequeue all futex_q entries which
point to the same pi_state when there is no waiter on the rt mutex. This
requires obviously to make the dequeue conditional in the locking path to
prevent a double dequeue. With that it's guaranteed that user space cannot
observe an uncontended futex which has kernel state attached.
Fixes: fbeb558b0dd0d ("futex/pi: Fix recursive rt_mutex waiter state")
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240118115451.0TkD_ZhB@linutronix.de
Closes: https://lore.kernel.org/all/4611bcf2-44d0-4c34-9b84-17406f881003@kernel.org
|
|
drm_gem_private_object_init expect the object size be page size
aligned. The xe_bo create functions do not update the size for
any alignment requirements. So align cfb size to be page size
aligned in xe stolen memory handling.
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240112092803.61664-2-vinod.govindapillai@intel.com
|
|
The max channel count for RZ DMAC is 16, hence use u8 instead of unsigned
int and make the pdev_irqname string long enough to avoid the warning.
This fixes the below issue:
drivers/dma/sh/rz-dmac.c: In function ‘rz_dmac_probe’:
drivers/dma/sh/rz-dmac.c:770:34: warning: ‘%u’ directive writing between 1 and 10 bytes into a region of size 3 [-Wformat-overflow=]
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~
In function ‘rz_dmac_chan_probe’,
inlined from ‘rz_dmac_probe’ at drivers/dma/sh/rz-dmac.c:910:9:
drivers/dma/sh/rz-dmac.c:770:31: note: directive argument in the range [0, 4294967294]
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~
drivers/dma/sh/rz-dmac.c:770:9: note: ‘sprintf’ output between 4 and 13 bytes into a destination of size 5
770 | sprintf(pdev_irqname, "ch%u", index);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
While at it use scnprintf() instead of sprintf() to make the code
more robust.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240110222717.193719-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix warnings of "Excess struct member" by removing those lines.
They are extraneous.
imx-sdma.c:467: warning: Excess struct member 'context_loaded' description in 'sdma_channel'
imx-sdma.c:467: warning: Excess struct member 'bd_pool' description in 'sdma_channel'
imx-sdma.c:500: warning: Excess struct member 'script_addrs' description in 'sdma_firmware_header'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20240119032832.4051-1-rdunlap@infradead.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
xdma_channel_isr()
Clang warns (or errors with CONFIG_WERROR=y):
drivers/dma/xilinx/xdma.c:894:3: error: variable 'desc' is uninitialized when used here [-Werror,-Wuninitialized]
894 | desc->error = true;
| ^~~~
The initialization of desc was moved too far forward, move it back so
that this assignment does not result in a potential crash at runtime
while clearing up the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1972
Fixes: 2f8f90cd2f8d ("dmaengine: xilinx: xdma: Implement interleaved DMA transfers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231222-dma-xilinx-xdma-clang-fixes-v1-2-84a18ff184d2@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Clang warns (or errors with CONFIG_WERROR=y):
drivers/dma/xilinx/xdma.c:757:68: error: operator '?:' has lower precedence than '+'; '+' will be evaluated first [-Werror,-Wparentheses]
757 | src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
drivers/dma/xilinx/xdma.c:757:68: note: place parentheses around the '+' expression to silence this warning
757 | src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
| ^
| ( )
drivers/dma/xilinx/xdma.c:757:68: note: place parentheses around the '?:' expression to evaluate it first
757 | src_addr += dmaengine_get_src_icg(xt, &xt->sgl[i]) + xt->src_inc ?
| ^
| (
758 | xt->sgl[i].size : 0;
|
| )
drivers/dma/xilinx/xdma.c:759:68: error: operator '?:' has lower precedence than '+'; '+' will be evaluated first [-Werror,-Wparentheses]
759 | dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^
drivers/dma/xilinx/xdma.c:759:68: note: place parentheses around the '+' expression to silence this warning
759 | dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
| ^
| ( )
drivers/dma/xilinx/xdma.c:759:68: note: place parentheses around the '?:' expression to evaluate it first
759 | dst_addr += dmaengine_get_dst_icg(xt, &xt->sgl[i]) + xt->dst_inc ?
| ^
| (
760 | xt->sgl[i].size : 0;
|
| )
The src_inc and dst_inc members of 'struct dma_interleaved_template' are
booleans, so it does not make sense for the addition to happen first.
Wrap the conditional operator in parantheses so it is evaluated first.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1971
Fixes: 2f8f90cd2f8d ("dmaengine: xilinx: xdma: Implement interleaved DMA transfers")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231222-dma-xilinx-xdma-clang-fixes-v1-1-84a18ff184d2@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
dmaengine updates for v6.8
New support:
- Loongson LS2X APB DMA controller
- sf-pdma: mpfs-pdma support
- Qualcomm X1E80100 GPI dma controller support
Updates:
- Xilinx XDMA updates to support interleaved DMA transfers
- TI PSIL threads for AM62P and J722S and cfg register regions description
- axi-dmac Improving the cyclic DMA transfers
- Tegra Support dma-channel-mask property
- Remaining platform remove callback returning void conversions
|
|
There is no need to use $(foreach ...) for iterating over just one parameter.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20231120235423.4103310-1-masahiroy@kernel.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
After commit 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
nid of a reserved region is used by init_reserved_page() (with
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y) to access node strucure.
In many cases the nid of the reserved memory is not set and this causes
a crash.
When the nid of a reserved region is not set, fall back to
early_pfn_to_nid(), so that nid of the first_online_node will be passed
to init_reserved_page().
Fixes: 61167ad5fecd ("mm: pass nid to reserve_bootmem_region()")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20240118061853.2652295-1-yajun.deng@linux.dev
[rppt: massaged the commit message]
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
|
|
Some devices list 3 Gpio resources in the ACPI resource list for
the touchscreen:
1. GpioInt resource pointing to the GPIO used for the interrupt
2. GpioIo resource pointing to the reset GPIO
3. GpioIo resource pointing to the GPIO used for the interrupt
Note how the third extra GpioIo resource really is a duplicate
of the GpioInt provided info.
Ignore this extra GPIO, treating this setup the same as gpio_count == 2 &&
gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook
Colossus W803 rugged tablet and likely also on the CyberBook_T116K.
Reported-by: Maarten van der Schrieck
Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22
Suggested-by: Maarten van der Schrieck
Tested-by: Maarten van der Schrieck
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Include <linux/of.h> instead of <linux/of_device.h> to fix
below compilation errors:
drivers/gpu/drm/panel/panel-novatek-nt36672e.c:564:14: error: implicit declaration of function 'of_device_get_match_data'
ctx->desc = of_device_get_match_data(dev);
^
drivers/gpu/drm/panel/panel-novatek-nt36672e.c:622:34: error: array type has incomplete element type 'struct of_device_id'
static const struct of_device_id nt36672e_of_match[] = {
^
Signed-off-by: Ritesh Kumar <quic_riteshk@quicinc.com>
Fixes: ea4f9975625a ("drm/panel: Add support for Novatek NT36672E panel driver")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116071803.5264-1-quic_riteshk@quicinc.com
|
|
This adds a DMI orientation quirk for the GPD Win Mini panel.
Signed-off-by: Samuel Dionne-Riel <samuel@dionne-riel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231222030149.3740815-2-samuel@dionne-riel.com
|
|
One instance of gpio_backlight_platform_data.fbdev was renamed, but the
second instance was forgotten, causing a build failure:
arch/sh/boards/mach-ecovec24/setup.c: In function ‘arch_setup’:
arch/sh/boards/mach-ecovec24/setup.c:1223:37: error: ‘struct gpio_backlight_platform_data’ has no member named ‘fbdev’; did you mean ‘dev’?
1223 | gpio_backlight_data.fbdev = NULL;
| ^~~~~
| dev
Fix this by updating the second instance.
Fixes: ed369def91c1579a ("backlight/gpio_backlight: Rename field 'fbdev' to 'dev'")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309231601.Uu6qcRnU-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230925111022.3626362-1-geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix for definition of wakeref_t
- Fix for an error code aliasing
- Fix for VM_UNBIND_ALL in the case there are no bound VMAs
- Fixes for a number of __iomem address space mismatches reported by sparse
- Fixes for the assignment of exec_queue priority
- A Fix for skip_guc_pc not taking effect
- Workaround for a build problem on GCC 11
- A couple of fixes for error paths
- Fix a Flat CCS compression metadata copy issue
- Fix a misplace array bounds checking
- Don't have display support depend on EXPERT (as discussed on IRC)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m?= <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240116102204.106520-1-thomas.hellstrom@linux.intel.com
|
|
nvif_vmm_put gets called if addr is set, but if the allocation
fails we don't need to call put, otherwise we get a warning like
[523232.435671] ------------[ cut here ]------------
[523232.435674] WARNING: CPU: 8 PID: 1505697 at drivers/gpu/drm/nouveau/nvif/vmm.c:68 nvif_vmm_put+0x72/0x80 [nouveau]
[523232.435795] Modules linked in: uinput rfcomm snd_seq_dummy snd_hrtimer nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink qrtr bnep sunrpc binfmt_misc intel_rapl_msr intel_rapl_common intel_uncore_frequency intel_uncore_frequency_common isst_if_common iwlmvm nfit libnvdimm vfat fat x86_pkg_temp_thermal intel_powerclamp mac80211 snd_soc_avs snd_soc_hda_codec coretemp snd_hda_ext_core snd_soc_core snd_hda_codec_realtek kvm_intel snd_hda_codec_hdmi snd_compress snd_hda_codec_generic ac97_bus snd_pcm_dmaengine snd_hda_intel libarc4 snd_intel_dspcfg snd_intel_sdw_acpi snd_hda_codec kvm iwlwifi snd_hda_core btusb snd_hwdep btrtl snd_seq btintel irqbypass btbcm rapl snd_seq_device eeepc_wmi btmtk intel_cstate iTCO_wdt cfg80211 snd_pcm asus_wmi bluetooth intel_pmc_bxt iTCO_vendor_support snd_timer ledtrig_audio pktcdvd snd mei_me
[523232.435828] sparse_keymap intel_uncore i2c_i801 platform_profile wmi_bmof mei pcspkr ioatdma soundcore i2c_smbus rfkill idma64 dca joydev acpi_tad loop zram nouveau drm_ttm_helper ttm video drm_exec drm_gpuvm gpu_sched crct10dif_pclmul i2c_algo_bit nvme crc32_pclmul crc32c_intel drm_display_helper polyval_clmulni nvme_core polyval_generic e1000e mxm_wmi cec ghash_clmulni_intel r8169 sha512_ssse3 nvme_common wmi pinctrl_sunrisepoint uas usb_storage ip6_tables ip_tables fuse
[523232.435849] CPU: 8 PID: 1505697 Comm: gnome-shell Tainted: G W 6.6.0-rc7-nvk-uapi+ #12
[523232.435851] Hardware name: System manufacturer System Product Name/ROG STRIX X299-E GAMING II, BIOS 1301 09/24/2021
[523232.435852] RIP: 0010:nvif_vmm_put+0x72/0x80 [nouveau]
[523232.435934] Code: 00 00 48 89 e2 be 02 00 00 00 48 c7 04 24 00 00 00 00 48 89 44 24 08 e8 fc bf ff ff 85
c0 75 0a 48 c7 43 08 00 00 00 00 eb b3 <0f> 0b eb f2 e8 f5 c9 b2 e6 0f 1f 44 00 00 90 90 90 90 90 90 90 90
[523232.435936] RSP: 0018:ffffc900077ffbd8 EFLAGS: 00010282
[523232.435937] RAX: 00000000fffffffe RBX: ffffc900077ffc00 RCX: 0000000000000010
[523232.435938] RDX: 0000000000000010 RSI: ffffc900077ffb38 RDI: ffffc900077ffbd8
[523232.435940] RBP: ffff888e1c4f2140 R08: 0000000000000000 R09: 0000000000000000
[523232.435940] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888503811800
[523232.435941] R13: ffffc900077ffca0 R14: ffff888e1c4f2140 R15: ffff88810317e1e0
[523232.435942] FS: 00007f933a769640(0000) GS:ffff88905fa00000(0000) knlGS:0000000000000000
[523232.435943] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[523232.435944] CR2: 00007f930bef7000 CR3: 00000005d0322001 CR4: 00000000003706e0
[523232.435945] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[523232.435946] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[523232.435964] Call Trace:
[523232.435965] <TASK>
[523232.435966] ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436051] ? __warn+0x81/0x130
[523232.436055] ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436138] ? report_bug+0x171/0x1a0
[523232.436142] ? handle_bug+0x3c/0x80
[523232.436144] ? exc_invalid_op+0x17/0x70
[523232.436145] ? asm_exc_invalid_op+0x1a/0x20
[523232.436149] ? nvif_vmm_put+0x72/0x80 [nouveau]
[523232.436230] ? nvif_vmm_put+0x64/0x80 [nouveau]
[523232.436342] nouveau_vma_del+0x80/0xd0 [nouveau]
[523232.436506] nouveau_vma_new+0x1a0/0x210 [nouveau]
[523232.436671] nouveau_gem_object_open+0x1d0/0x1f0 [nouveau]
[523232.436835] drm_gem_handle_create_tail+0xd1/0x180
[523232.436840] drm_prime_fd_to_handle_ioctl+0x12e/0x200
[523232.436844] ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10
[523232.436847] drm_ioctl_kernel+0xd3/0x180
[523232.436849] drm_ioctl+0x26d/0x4b0
[523232.436851] ? __pfx_drm_prime_fd_to_handle_ioctl+0x10/0x10
[523232.436855] nouveau_drm_ioctl+0x5a/0xb0 [nouveau]
[523232.437032] __x64_sys_ioctl+0x94/0xd0
[523232.437036] do_syscall_64+0x5d/0x90
[523232.437040] ? syscall_exit_to_user_mode+0x2b/0x40
[523232.437044] ? do_syscall_64+0x6c/0x90
[523232.437046] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Reported-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240117213852.295565-1-airlied@gmail.com
|
|
The KVM RISC-V allows Zfa extension for Guest/VM so let us
add this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zfa extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zvfh[min] extensions for Guest/VM so let us
add these extensions to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zvfh[min] extensions for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zihintntl extension for Guest/VM so let us
add this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zihintntl extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zfh[min] extensions for Guest/VM so let us
add these extensions to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zfh[min] extensions for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows vector crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zvbb, Zvbc, Zvkb, Zvkg, Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable vector crypto extensions for
Guest/VM. This includes extensions Zvbb, Zvbc, Zvkb, Zvkg,
Zvkned, Zvknha, Zvknhb, Zvksed, Zvksh, and Zvkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows scaler crypto extensions for Guest/VM so let us
add these extensions to get-reg-list test. This includes extensions
Zbkb, Zbkc, Zbkx, Zknd, Zkne, Zknh, Zkr, Zksed, Zksh, and Zkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable scalar crypto extensions for
Guest/VM. This includes extensions Zbkb, Zbkc, Zbkx, Zknd, Zkne,
Zknh, Zkr, Zksed, Zksh, and Zkt.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
The KVM RISC-V allows Zbc extension for Guest/VM so let us add
this extension to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zbc extension for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
MS-SMB2 spec has introduced two new status codes,
STATUS_SERVER_UNAVAILABLE and STATUS_FILE_NOT_AVAILABLE
which are to be treated as retryable errors.
This change adds these to the available mappings and
maps them to Linux errno EAGAIN.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Today, the tree connect and disconnect requests are
sent on the primary channel only. However, the new
multichannel logic allows the session to remain active
even if one of the channels are alive. So a tree connect
can now be triggered during a reconnect on any of
its channels.
This change changes tcon and tdis calls to pick an
active channel instead of the first one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
