summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-15drm/i915: Only attempt to signal the request once from the interrupt handlerChris Wilson
Check that request has not been signaled before acquiring a reference to the request for signaling later in the interrupt handler. The loading of the cacheline (for request->fence.flags) should be "free" when followed by the locked increment of the request->fence.refcount (which then sets the cacheline to exclusive mode), i.e. the cost of test_bit prior to an atomic_inc should be negligible. This should benefit us when we have a pile of bare breadcrumbs (interrupted execbuf) where we may get interrupts faster than we can get rid of the intel_wait, or if the device is too slow to run the bottom-half between interrupts. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-5-chris@chris-wilson.co.uk
2017-03-15drm/i915/breadcrumbs: Assert that we do not shortcut the current bottom-halfChris Wilson
We need to ensure that we always serialize updates to the bottom-half using the breadcrumbs.irq_lock so that we don't race with a concurrent interrupt handler. This is most important just prior to leaving the waiter (when the intel_wait will be overwritten), so make sure we are not the current bottom-half when skipping the irq locks. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-4-chris@chris-wilson.co.uk
2017-03-15drm/i915/breadcrumbs: Disable interrupt bottom-half first on idlingChris Wilson
Before walking the rbtree of waiters (marking them as complete and waking them), decouple the interrupt handler. This prevents a race between the missed waiter waking up and removing its intel_wait (which skips checking the lock) and the interrupt handler dereferencing the intel_wait. (Though we do not expect to encounter waiters during idle!) Fixes: e1c0c91bdaec ("drm/i915: Wake up all waiters before idling") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-3-chris@chris-wilson.co.uk
2017-03-15drm/i915/breadcrumbs: Update bottom-half before marking as completeChris Wilson
When adding a new request to the breadcrumb rbtree, we mark all those requests inside the rbtree that are already completed as complete. This wakes those waiters up and allows them to skip the spinlock before returning to userspace. If one of those is the current bottom-half and allocated its intel_wait on the stack, it may then overwrite the b->irq_wait upon exiting i915_wait_request() just as the interrupt handler dereferences it. Fixes: 56299fb7d904 ("drm/i915: Signal first fence from irq handler if complete") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-2-chris@chris-wilson.co.uk
2017-03-15drm/i915/breadcrumbs: Use booleans for intel_breadcrumbs_busy()Chris Wilson
Since commit 9b6586ae9f6b ("drm/i915: Keep a global seqno per-engine") converted intel_breadcrumbs_busy() to reporting a single boolean, we need only compute a boolean internally (and not needlessly compute the flag). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170315210726.12095-1-chris@chris-wilson.co.uk
2017-03-15parisc: Avoid compiler warnings with access_ok()Helge Deller
Commit 09b871ffd4d8 (parisc: Define access_ok() as macro) missed to mark uaddr as used, which then gives compiler warnings about unused variables. Fix it by comparing uaddr to uaddr which then gets optimized away by the compiler. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 09b871ffd4d8 ("parisc: Define access_ok() as macro")
2017-03-15drm/amd/amdgpu: Fix debugfs reg read/write address widthTom St Denis
The MMIO space is wider now so we mask the lower 22 bits instead of 18. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-03-15drm/amdgpu/si: add dpm quirk for OlandAlex Deucher
OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems with higher sclks. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-03-15drm/radeon/si: add dpm quirk for OlandAlex Deucher
OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems with higher sclks. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2017-03-15parisc: Wire up statx system callHelge Deller
Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-15parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_rangeJohn David Anglin
The previously submitted patch did not resolve the random segmentation faults observed on the phantom buildd system. There are still unresolved problems with the Debian 4.8 and 4.9 kernels on C8000. The attached patch removes the flush of the offset map pages and does a whole data cache flush for large ranges. No other arch flushes the offset map in these routines as far as I can tell. I have not observed any random segmentation faults on rp3440 in two weeks of testing with 4.10.0 and 4.10.1. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-15parisc: support R_PARISC_SECREL32 relocation in modulesMikulas Patocka
The parisc kernel doesn't work with CONFIG_MODVERSIONS since the commit 71810db27c1c853b335675bee335d893bc3d324b. It can't load modules with the error: "module unix: Unknown relocation: 41". The commit changes __kcrctab from 64-bit valus to 32-bit values. The assembler generates R_PARISC_SECREL32 secrel relocation for them and the module loader doesn't support this relocation. This patch adds the R_PARISC_SECREL32 relocation to the module loader. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-15Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a rather large set of fixes. The bulk are for lpfc correcting a lot of issues in the new NVME driver code which just went in in the merge window. The others are: - fix a hang in the vmware paravirt driver caused by incorrect handling of the new MSI vector allocation - long standing bug in storvsc, which recent block changes turned from being a harmless annoyance into a hang - yet more fallout (in mpt3sas) from the changes to device blocking The remainder are small fixes and updates" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (34 commits) scsi: lpfc: Add shutdown method for kexec scsi: storvsc: Workaround for virtual DVD SCSI version scsi: lpfc: revise version number to 11.2.0.10 scsi: lpfc: code cleanups in NVME initiator discovery scsi: lpfc: code cleanups in NVME initiator base scsi: lpfc: correct rdp diag portnames scsi: lpfc: remove dead sli3 nvme code scsi: lpfc: correct double print scsi: lpfc: Rename LPFC_MAX_EQ_DELAY to LPFC_MAX_EQ_DELAY_EQID_CNT scsi: lpfc: Rework lpfc Kconfig for NVME options scsi: lpfc: add transport eh_timed_out reference scsi: lpfc: Fix eh_deadline setting for sli3 adapters. scsi: lpfc: add NVME exchange aborts scsi: lpfc: Fix nvme allocation bug on failed nvme_fc_register_localport scsi: lpfc: Fix IO submission if WQ is full scsi: lpfc: Fix NVME CMD IU byte swapped word 1 problem scsi: lpfc: Fix RCTL value on NVME LS request and response scsi: lpfc: Fix crash during Hardware error recovery on SLI3 adapters scsi: lpfc: fix missing spin_unlock on sql_list_lock scsi: lpfc: don't dereference dma_buf->iocbq before null check ...
2017-03-15Merge tag 'gfs2-4.11-rc3.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fix from Bob Peterson: "This is an emergency patch for 4.11-rc3 The GFS2 developers uncovered a really nasty problem that can lead to random corruption and kernel panic, much like the last one. Andreas Gruenbacher wrote a simple one-line patch to fix the problem." * tag 'gfs2-4.11-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Avoid alignment hole in struct lm_lockname
2017-03-15Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - self-test failure of crc32c on powerpc - regressions of ecb(aes) when used with xts/lrw in s5p-sss - a number of bugs in the omap RNG driver * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix spinlock recursion on LRW(AES) hwrng: omap - Do not access INTMASK_REG on EIP76 hwrng: omap - use devm_clk_get() instead of of_clk_get() hwrng: omap - write registers after enabling the clock crypto: s5p-sss - Fix completing crypto request in IRQ handler crypto: powerpc - Fix initialisation of crc32c context
2017-03-15cpufreq: intel_pstate: Avoid percentages in limits-related computationsRafael J. Wysocki
Currently, intel_pstate_update_perf_limits() first converts the policy minimum and maximum limits into percentages of the maximum turbo frequency (rounding up to an integer) and then converts these percentages to fractions (by using fixed-point arithmetic to divide them by 100). That introduces a rounding error unnecessarily, because the fractions can be obtained by carrying out fixed-point divisions directly on the input numbers. Rework the computations in intel_pstate_hwp_set() to use fractions instead of percentages (and drop redundant local variables from there) and modify intel_pstate_update_perf_limits() to compute the fractions directly and percentages out of them. While at it, introduce percent_ext_fp() for converting percentages to fractions (with extended number of fraction bits) and use it in the computations. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-15drm/i915: Extend rpm wakelock during i915_handle_error()Chris Wilson
We take the runtime pm wakelock during i915_handle_error() to ensure that all paths that reach the error handler keep the device awake during the hw reads. However, we need to extend that from the reset handler to include the earlier capture routines. Reported-by: Antonio Argenziano <antonio.argenziano@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170314171840.25706-1-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com>
2017-03-15drm/i915/guc: Use formalized struct definition for ads objectMichal Wajdeczko
Manual pointer manipulation is error prone. Let compiler calculate right offsets for us in case we need to change ads layout. v2: don't call it object (Chris) v3: restyle offset assignments (Chris) v4: stylistic reductions Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170314133309.126432-1-michal.wajdeczko@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-03-16openrisc: Export symbols needed by modulesStafford Horne
This was detected by allmodconfig, errors reported: ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined! ERROR: "__ucmpdi2" [lib/842/842_decompress.ko] undefined! ERROR: "empty_zero_page" [fs/nfs/objlayout/objlayoutdriver.ko] undefined! ERROR: "empty_zero_page" [fs/exofs/exofs.ko] undefined! ERROR: "empty_zero_page" [fs/crypto/fscrypto.ko] undefined! ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined! ERROR: "pm_power_off" [drivers/regulator/act8865-regulator.ko] undefined! ERROR: "__ucmpdi2" [drivers/media/i2c/adv7842.ko] undefined! ERROR: "__clear_user" [drivers/md/dm-mod.ko] undefined! ERROR: "__clear_user" [net/netfilter/x_tables.ko] undefined! Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-03-16openrisc: fix issue handling 8 byte get_user callsStafford Horne
Was getting the following error with allmodconfig: ERROR: "__get_user_bad" [lib/test_user_copy.ko] undefined! This was simply a missing break statement, causing an unwanted fall through. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-03-16openrisc: xchg: fix `computed is not used` warningStafford Horne
When building allmodconfig this warning shows. fs/ocfs2/file.c: In function 'ocfs2_file_write_iter': ./arch/openrisc/include/asm/cmpxchg.h:81:3: warning: value computed is not used [-Wunused-value] ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), sizeof(*(ptr)))) ^ Applying the same patch logic that was done to the cmpxchg macro. Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-03-15gpu: ipu-v3: add DT binding for the Prefetch Resolve GasketLucas Stach
This adds the the devicetree binding for the Prefetch Resolve Gasket, as found on i.MX6 QuadPlus. The PRG is fairly simple in that it only has a configuration register range and two clocks, one for the AHB slave port and one for the AXI ports and the functional units. The PRE connections need to be described in the DT, as the PRE<->PRG assignment is a mix between fixed and muxable connections. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15gpu: ipu-v3: add driver for Prefetch Resolve EngineLucas Stach
This adds support for the i.MX6 QuadPlus PRE units. Currently only linear prefetch into SRAM is supported, other modes of operation like the tiled-to-linear conversion will be added later. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15gpu: ipu-v3: add DT binding for the Prefetch Resolve EngineLucas Stach
The Prefetch Resolve Engine is a prefetch and tile resolve engine which prefetches display data from DRAM to an internal SRAM region. It has a single clock for configuration register access and the functional units. A single shared interrupt is used for status and error signaling. The only external dependency is the SRAM region to use for the prefetch double buffer. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm/imx: ipuv3-plane: add support for separate alpha planesPhilipp Zabel
The IPUv3 can read 8-bit alpha values from a separate plane buffer using a companion IDMAC channel driven by the Alpha Transparency Controller (ATC) for the graphics channels. The conditional read mechanism allows to reduce memory bandwidth by skipping reads of color data for completely transparent bursts. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm/imx: extend drm_plane_state_to_eba for separate channel supportPhilipp Zabel
Allow to calculate EBA for planes other than plane 0. This is in preparation for the following patch, which adds support for separate alpha planes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15gpu: ipu-v3: add support for separate alpha channelsPhilipp Zabel
The IPUv3 can read 8-bit alpha values from a separate IDMAC channel driven by the Alpha Transparency Controller (ATC) for the graphics IDMAC channels. This allows to reduce memory bandwidth via a conditional read mechanism or to support planar YUV formats with alpha transparency. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm: add RGB formats with separate alpha planePhilipp Zabel
Some hardware can read the alpha components separately and then conditionally fetch color components only for non-zero alpha values. This patch adds fourcc definitions for two-plane RGB formats with an 8-bit alpha channel on a second plane. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm/imx: add deferred plane disablingPhilipp Zabel
The DP (display processor) channel disable code tried to busy wait for the DP sync flow end interrupt status bit when disabling the partial plane without a full modeset. That never worked reliably, and it was disabled completely by the recent "gpu: ipu-v3: remove IRQ dance on DC channel disable" patch, causing ipu_wait_interrupt to always time out after 50 ms, which in turn would trigger a timeout in drm_atomic_helper_wait_for_vblanks. This patch changes ipu_plane_atomic_disable to only queue a DP channel register update at the next frame boundary and set a flag, which can be done without any waiting whatsoever. The imx_drm_atomic_commit_tail then calls a new ipu_plane_disable_deferred function that does the actual IDMAC teardown of the planes that are flagged for deferred disabling, after waiting for the vblank. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-15drm/imx: don't wait for vblank and stop calling cleanup_planes in commit_tailPhilipp Zabel
drm_atomic_helper_cleanup_planes only calls the cleanup_fb plane helpers, which we don't implement as a CMA framebuffer based driver. There is no reason to wait for vblanks in commit_tail only to do nothing afterwards. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-15gpu: ipu-v3: add unsynchronised DP channel disablingPhilipp Zabel
When disabling the foreground DP channel during a modeset, the DC is already disabled without waiting for end of frame. There is no reason to wait for a frame boundary before updating the DP registers in that case. Add support to apply updates immediately. No functional changes, yet. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
2017-03-15gpu: ipu-v3: remove IRQ dance on DC channel disableLucas Stach
This has never worked properly, as the IRQ got retriggered immediately on unmask. Remove the IRQ wait dance, as it is apparently safe to disable the DC channel at any point in time. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15gpu: ipu-cpmem: add bayer formats to ipu_cpmem_set_imagePhilipp Zabel
The IPU does not natively understand bayer formats, but it can pass them through unchanged. Add support for setting the image base address and cropping offset to ipu_cpmem_set_image. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15gpu: ipu-cpmem: set image base address even for incorrect formatsPhilipp Zabel
Otherwise, if the image base address is kept at zero, and if the user ignores the error return value, the IPU may be configured to write into the dma-apbh@00110000 region for large frames, which will lock up the system. Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm/imx: ipuv3-plane: update overlay plane position also without modesetPhilipp Zabel
Previously, the overlay plane position would only be updated when the plane was first enabled or during a modeset. We can instruct the DP to move the plane also when just updating the EBA. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15drm/imx: ipuv3-plane: use drm_plane_helper_check_state, clipped coordinatesPhilipp Zabel
Use drm_plane_helper_check_state to clip raw user coordinates to crtc bounds. This checks for full plane coverage and scaling already, so we can drop some custom checks. Use the clipped coordinates everywhere. Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-03-15gfs2: Avoid alignment hole in struct lm_locknameAndreas Gruenbacher
Commit 88ffbf3e03 switches to using rhashtables for glocks, hashing over the entire struct lm_lockname instead of its individual fields. On some architectures, struct lm_lockname contains a hole of uninitialized memory due to alignment rules, which now leads to incorrect hash values. Get rid of that hole. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com> CC: <stable@vger.kernel.org> #v4.3+
2017-03-15drm/i915/uc: Add params for specifying firmwareArkadiusz Hiler
`guc_firmware_path` and `huc_firmware_path` module parameters are added. Using the parameter disables version checks and loads desired firmware instead of the default one. v2: make params unsafe && notice about disabled fw check (J. Lahtinen) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/uc: Separate firmware selection and preparationArkadiusz Hiler
intel_{h,g}uc_init_fw selects correct firmware and then triggers it's preparation (fetch + initial parsing). This change separates out select steps, so those can be called by the sanitize_options(). Then, during the init_fw(), we prepare the firmware if the firmware was selected. Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/uc: Simplify firmware path handlingArkadiusz Hiler
Currently fw->path values can represent one of three possible states: 1) NULL - device without the uC 2) '\0' - device with the uC but have no firmware 3) else - device with the uC and we have firmware Second case is used only to WARN at a later stage. We can WARN right away and merge cases 1 and 2. Code can be even further simplified and common (HuC/GuC logic) happening right before the fetch can be offloaded to the common function. v2: fewer temporary variables, more straightforward flow (M. Wajdeczko) v3: DRM_ERROR instead of WARN (M. Wajdeczko) v4: coding standard (J. Lahtinen) v5: non-trivial rebase v6: remove path check, we are checking fetch status (M. Wajdeczko) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/guc: Simplify intel_guc_init_hw()Arkadiusz Hiler
Current version of intel_guc_init_hw() does a lot: - cares about submission - loads huc - implement WA This change offloads some of the logic to intel_uc_init_hw(), which now cares about the above. v2: rename guc_hw_reset and fix typo in define name (M. Wajdeczko) v3: rename once again v4: remove spurious comments and add some style (J. Lahtinen) v5: flow changes, got rid of dead checks (M. Wajdeczko) v6: rebase v7: rebase & onion teardown (J. Lahtinen) Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/guc: Extract param logic form guc_init_fw()Arkadiusz Hiler
Let intel_guc_init_fw() focus on determining and fetching the correct firmware. This patch introduces intel_uc_sanitize_options() that is called from intel_sanitize_options(). Then, if we have GuC, we can call intel_guc_init_fw() conditionally and we do not have to do the internal checks. v2: fix comment, notify when nuking GuC explicitly enabled (M. Wajdeczko) v3: fix comment again, change the nuke message (M. Wajdeczko) v4: update title to reflect new function name + rebase v5: text && remove 2 uneccessary checks (M. Wajdeczko) Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/uc: Introduce intel_uc_init_fw()Arkadiusz Hiler
Instead of calling intel_guc_init() and intel_huc_init() one by one this patch introduces intel_uc_init_fw() function that calls them both. Called functions are renamed accordingly. Trying to have subject_verb_object ordering and more descriptive names, the intel_huc_init() and intel_guc_init() functions are renamed. For guc_init(): * `intel_guc` is the subject, so those functions now take intel_guc structure, instead of the dev_priv * init is the verb * fw is the object which better describes the function's role huc_init() change follows the same reasoning. v2: settle on intel_uc_fetch_fw name (M. Wajdeczko) v3: yet another rename - intel_uc_init_fw (J. Lahtinen) v4: non-trivial rebase Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/uc: Move intel_uc_fw_fetch() to intel_uc.cArkadiusz Hiler
The file fits better. Additionally rename it to intel_uc_prepare_fw(), as the function does more than simple fetch. `obj` cleanup in the function is also fixed (i.e. removed). In the fail scenario it was always 'put' but there's no possible flow that initializes the obj properly and then goes to the fail label. v2: remove second declaration, reorder (M. Wajdeczko) v3: non-trivial rebase v4: remove obj cleanup in the fail scenario (C. Wilson) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/uc: Rename intel_?uc_{setup, load}() to _init_hw()Arkadiusz Hiler
GuC historically has two "startup" functions called _init() and _setup() Then HuC came with it's _init() and _load(). This commit renames intel_guc_setup() and intel_huc_load() to *uc_init_hw() as they called from the i915_gem_init_hw(). The aim is to be consistent in that entry points called during particular driver init phases (e.g. init_hw) are all suffixed by that phase. When reading the leaf functions, it should be clear at what stage during the driver load it is called and therefore what operations are legal at that point. Also, since the functions start with intel_guc and intel_huc they take appropiate structure. v2: commit message update (Chris Wilson) v3: change taken parameters to be more "semantic" (M. Wajdeczko) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/huc: Add huc_to_i915Arkadiusz Hiler
Used to obtain "dev_priv" from huc struct pointer. We already have similar thing for guc. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15drm/i915/uc: Drop superfluous externs in intel_uc.hArkadiusz Hiler
Externs are implicit and we generally try to avoid them. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-15xfs: verify inline directory data forksDarrick J. Wong
When we're reading or writing the data fork of an inline directory, check the contents to make sure we're not overflowing buffers or eating garbage data. xfs/348 corrupts an inline symlink into an inline directory, triggering a buffer overflow bug. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> --- v2: add more checks consistent with _dir2_sf_check and make the verifier usable from anywhere.
2017-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Ensure that mtu is at least IPV6_MIN_MTU in ipv6 VTI tunnel driver, from Steffen Klassert. 2) Fix crashes when user tries to get_next_key on an LPM bpf map, from Alexei Starovoitov. 3) Fix detection of VLAN fitlering feature for bnx2x VF devices, from Michal Schmidt. 4) We can get a divide by zero when TCP socket are morphed into listening state, fix from Eric Dumazet. 5) Fix socket refcounting bugs in skb_complete_wifi_ack() and skb_complete_tx_timestamp(). From Eric Dumazet. 6) Use after free in dccp_feat_activate_values(), also from Eric Dumazet. 7) Like bonding team needs to use ETH_MAX_MTU as netdev->max_mtu, from Jarod Wilson. 8) Fix use after free in vrf_xmit(), from David Ahern. 9) Don't do UDP Fragmentation Offload on IPComp ipsec packets, from Alexey Kodanev. 10) Properly check napi_complete_done() return value in order to decide whether to re-enable IRQs or not in amd-xgbe driver, from Thomas Lendacky. 11) Fix double free of hwmon device in marvell phy driver, from Andrew Lunn. 12) Don't crash on malformed netlink attributes in act_connmark, from Etienne Noss. 13) Don't remove routes with a higher metric in ipv6 ECMP route replace, from Sabrina Dubroca. 14) Don't write into a cloned SKB in ipv6 fragmentation handling, from Florian Westphal. 15) Fix routing redirect races in dccp and tcp, basically the ICMP handler can't modify the socket's cached route in it's locked by the user at this moment. From Jon Maxwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (108 commits) qed: Enable iSCSI Out-of-Order qed: Correct out-of-bound access in OOO history qed: Fix interrupt flags on Rx LL2 qed: Free previous connections when releasing iSCSI qed: Fix mapping leak on LL2 rx flow qed: Prevent creation of too-big u32-chains qed: Align CIDs according to DORQ requirement mlxsw: reg: Fix SPVMLR max record count mlxsw: reg: Fix SPVM max record count net: Resend IGMP memberships upon peer notification. dccp: fix memory leak during tear-down of unsuccessful connection request tun: fix premature POLLOUT notification on tun devices dccp/tcp: fix routing redirect race ucc/hdlc: fix two little issue vxlan: fix ovs support net: use net->count to check whether a netns is alive or not bridge: drop netfilter fake rtable unconditionally ipv6: avoid write to a possibly cloned skb net: wimax/i2400m: fix NULL-deref at probe isdn/gigaset: fix NULL-deref at probe ...
2017-03-15Merge tag 'drm-intel-fixes-2017-03-14' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.11-rc3 * tag 'drm-intel-fixes-2017-03-14' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Fix forcewake active domain tracking drm/i915: Nuke skl_update_plane debug message from the pipe update critical section drm/i915: use correct node for handling cache domain eviction drm/i915: Drain the freed state from the tail of the next commit drm/i915: Nuke debug messages from the pipe update critical section drm/i915: Use pagecache write to prepopulate shmemfs from pwrite-ioctl drm/i915: Store a permanent error in obj->mm.pages drm/i915: Move updating color management to before vblank evasion drm/i915/gen9: Increase PCODE request timeout to 50ms drm/i915: Avoid tweaking evaluation thresholds on Baytrail v3 drm/i915: Remove the vma from the drm_mm if binding fails drm/i915/fbdev: Stop repeating tile configuration on stagnation drm/i915/glk: Fix watermark computations for third sprite plane drm/i915: Squelch any ktime/jiffie rounding errors for wait-ioctl
generated by cgit (git 2.34.1) at 2025-09-12 05:23:28 +0000