summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-23Merge tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixlet from Alex Williamson: "Fix (false) uninitialized variable warning (Joerg Roedel)" * tag 'vfio-v5.4-rc5' of git://github.com/awilliam/linux-vfio: vfio/type1: Initialize resv_msi_base
2019-10-23Merge tag 'regulator-fix-v5.4-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "There are a few core fixes here around error handling and handling if suspend mode configuration and some driver specific fixes here but the most important change is the fix to the fixed-regulator DT schema conversion introduced during the last merge window. That fixes one of the last two errors preventing successful execution of "make dt_binding_check" which will be enormously helpful for DT schema development" * tag 'regulator-fix-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: qcom-rpmh: Fix PMIC5 BoB min voltage regulator: pfuze100-regulator: Variable "val" in pfuze100_regulator_probe() could be uninitialized regulator: lochnagar: Add on_off_delay for VDDCORE regulator: ti-abb: Fix timeout in ti_abb_wait_txdone/ti_abb_clear_all_txdone regulator: da9062: fix suspend_enable/disable preparation dt-bindings: fixed-regulator: fix compatible enum regulator: fixed: Prevent NULL pointer dereference when !CONFIG_OF regulator: core: make regulator_register() EPROBE_DEFER aware regulator: of: fix suspend-min/max-voltage parsing
2019-10-23MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTBFlorian Fainelli
The last time Gregory and Brian did a review was sometime around 2015, since then, they have not been active for ARCH_BRCMSTB changes. Following the position of other maintainers and Harald Welte's position here: [1] http://laforge.gnumonks.org/blog/20180307-mchardy-gpl/ remove both of them. Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-10-23drm/v3d: Fix memory leak in v3d_submit_cl_ioctlNavid Emamdoost
In the impelementation of v3d_submit_cl_ioctl() there are two memory leaks. One is when allocation for bin fails, and the other is when bin initialization fails. If kcalloc fails to allocate memory for bin then render->base should be put. Also, if v3d_job_init() fails to initialize bin->base then allocated memory for bin should be released. Fixes: a783a09ee76d ("drm/v3d: Refactor job management.") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191021185250.26130-1-navid.emamdoost@gmail.com
2019-10-23panfrost: Properly undo pm_runtime_enable when deferring a probeTomeu Vizoso
When deferring the probe because of a missing regulator, we were calling pm_runtime_disable even if pm_runtime_enable wasn't called. Move the call to pm_runtime_disable to the right place. Fixes: 635430797d3f ("drm/panfrost: Rework runtime PM initialization") Reported-by: Chen-Yu Tsai <wens@csie.org> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191023122157.32067-1-tomeu.vizoso@collabora.com
2019-10-23Merge tag 'omap-for-v5.4/fixes-rc4-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Three fixes for omaps for v5.4-rc cycle Two regression fixes for omap3 iommu. I missed applying two omap3 related iommu pdata quirks patches earlier because the kbuild test robot produced errors on them for missing dependencies. Fix ti-sysc interconnect target module driver handling for watchdog quirk. I must have tested this earlier only with watchdog service running, but clearly it does not do what it needs to do. * tag 'omap-for-v5.4/fixes-rc4-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix watchdog quirk handling ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs Link: https://lore.kernel.org/r/pull-1571848757-282222@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23dmaengine: cppi41: Fix cppi41_dma_prep_slave_sg() when idleTony Lindgren
Yegor Yefremov <yegorslists@googlemail.com> reported that musb and ftdi uart can fail for the first open of the uart unless connected using a hub. This is because the first dma call done by musb_ep_program() must wait if cppi41 is PM runtime suspended. Otherwise musb_ep_program() continues with other non-dma packets before the DMA transfer is started causing at least ftdi uarts to fail to receive data. Let's fix the issue by waking up cppi41 with PM runtime calls added to cppi41_dma_prep_slave_sg() and return NULL if still idled. This way we have musb_ep_program() continue with PIO until cppi41 is awake. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Reported-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v4.9+ Link: https://lore.kernel.org/r/20191023153138.23442-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-23Merge tag 'sunxi-fixes-for-5.4-1' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes A number of fixes for this release, but mostly: - A fixup for the A10 CSI DT binding merged during the 5.4-rc1 window - A fix for a dt-binding error - Addition of phy regulator delays - The PMU on the A64 was found to be non-functional, so we've dropped it for now * tag 'sunxi-fixes-for-5.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: Drop the module clock from the device tree dt-bindings: media: sun4i-csi: Drop the module clock media: dt-bindings: Fix building error for dt_binding_check arm64: dts: allwinner: a64: sopine-baseboard: Add PHY regulator delay arm64: dts: allwinner: a64: Drop PMU node arm64: dts: allwinner: a64: pine64-plus: Add PHY regulator delay Link: https://lore.kernel.org/r/80085a57-c40f-4bed-a9c3-19858d87564e.lettre@localhost Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-23posix-cpu-timers: Fix two trivial commentsYi Wang
Recent changes modified the function arguments of thread_group_sample_cputime() and task_cputimers_expired(), but forgot to update the comments. Fix it up. [ tglx: Changed the argument name of task_cputimers_expired() as the pointer points to an array of samples. ] Fixes: b7be4ef1365d ("posix-cpu-timers: Switch thread group sampling to array") Fixes: 001f7971433a ("posix-cpu-timers: Make expiry checks array based") Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/1571643852-21848-1-git-send-email-wang.yi59@zte.com.cn
2019-10-23timers/sched_clock: Include local timekeeping.h for missing declarationsBen Dooks (Codethink)
Include the timekeeping.h header to get the declaration of the sched_clock_{suspend,resume} functions. Fixes the following sparse warnings: kernel/time/sched_clock.c:275:5: warning: symbol 'sched_clock_suspend' was not declared. Should it be static? kernel/time/sched_clock.c:286:6: warning: symbol 'sched_clock_resume' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191022131226.11465-1-ben.dooks@codethink.co.uk
2019-10-23lib/vdso: Make clock_getres() POSIX compliant againThomas Gleixner
A recent commit removed the NULL pointer check from the clock_getres() implementation causing a test case to fault. POSIX requires an explicit NULL pointer check for clock_getres() aside of the validity check of the clock_id argument for obscure reasons. Add it back for both 32bit and 64bit. Note, this is only a partial revert of the offending commit which does not bring back the broken fallback invocation in the the 32bit compat implementations of clock_getres() and clock_gettime(). Fixes: a9446a906f52 ("lib/vdso/32: Remove inconsistent NULL pointer checks") Reported-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Christophe Leroy <christophe.leroy@c-s.fr> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1910211202260.1904@nanos.tec.linutronix.de
2019-10-23fuse: redundant get_fuse_inode() calls in fuse_writepages_fill()Vasily Averin
Currently fuse_writepages_fill() calls get_fuse_inode() few times with the same argument. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-23fuse: Add changelog entries for protocols 7.1 - 7.8Alan Somers
Retroactively add changelog entry for FUSE protocols 7.1 through 7.8. Signed-off-by: Alan Somers <asomers@FreeBSD.org> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-23fuse: truncate pending writes on O_TRUNCMiklos Szeredi
Make sure cached writes are not reordered around open(..., O_TRUNC), with the obvious wrong results. Fixes: 4d99ff8f12eb ("fuse: Turn writeback cache on") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-23fuse: flush dirty data/metadata before non-truncate setattrMiklos Szeredi
If writeback cache is enabled, then writes might get reordered with chmod/chown/utimes. The problem with this is that performing the write in the fuse daemon might itself change some of these attributes. In such case the following sequence of operations will result in file ending up with the wrong mode, for example: int fd = open ("suid", O_WRONLY|O_CREAT|O_EXCL); write (fd, "1", 1); fchown (fd, 0, 0); fchmod (fd, 04755); close (fd); This patch fixes this by flushing pending writes before performing chown/chmod/utimes. Reported-by: Giuseppe Scrivano <gscrivan@redhat.com> Tested-by: Giuseppe Scrivano <gscrivan@redhat.com> Fixes: 4d99ff8f12eb ("fuse: Turn writeback cache on") Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-23netfilter: nf_tables_offload: restore basechain deletionPablo Neira Ayuso
Unbind callbacks on chain deletion. Fixes: 8fc618c52d16 ("netfilter: nf_tables_offload: refactor the nft_flow_offload_chain function") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-10-23netfilter: nf_flow_table: set timeout before insertion into hashesPablo Neira Ayuso
Other garbage collector might remove an entry not fully set up yet. [570953.958293] RIP: 0010:memcmp+0x9/0x50 [...] [570953.958567] flow_offload_hash_cmp+0x1e/0x30 [nf_flow_table] [570953.958585] flow_offload_lookup+0x8c/0x110 [nf_flow_table] [570953.958606] nf_flow_offload_ip_hook+0x135/0xb30 [nf_flow_table] [570953.958624] nf_flow_offload_inet_hook+0x35/0x37 [nf_flow_table_inet] [570953.958646] nf_hook_slow+0x3c/0xb0 [570953.958664] __netif_receive_skb_core+0x90f/0xb10 [570953.958678] ? ip_rcv_finish+0x82/0xa0 [570953.958692] __netif_receive_skb_one_core+0x3b/0x80 [570953.958711] __netif_receive_skb+0x18/0x60 [570953.958727] netif_receive_skb_internal+0x45/0xf0 [570953.958741] napi_gro_receive+0xcd/0xf0 [570953.958764] ixgbe_clean_rx_irq+0x432/0xe00 [ixgbe] [570953.958782] ixgbe_poll+0x27b/0x700 [ixgbe] [570953.958796] net_rx_action+0x284/0x3c0 [570953.958817] __do_softirq+0xcc/0x27c [570953.959464] irq_exit+0xe8/0x100 [570953.960097] do_IRQ+0x59/0xe0 [570953.960734] common_interrupt+0xf/0xf Fixes: 43c8f131184f ("netfilter: nf_flow_table: fix missing error check for rhashtable_insert_fast") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-10-23rtlwifi: rtl_pci: Fix problem of too small skb->lenLarry Finger
In commit 8020919a9b99 ("mac80211: Properly handle SKB with radiotap only"), buffers whose length is too short cause a WARN_ON(1) to be executed. This change exposed a fault in rtlwifi drivers, which is fixed by regarding packets with skb->len <= FCS_LEN as though they are in error and dropping them. The test is now annotated as likely. Cc: Stable <stable@vger.kernel.org> # v5.0+ Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: 0x2720 is qu and 0x30DC is notLuca Coelho
When converting the wrong qu configurations in an earlier commit, I accidentally swapped 0x2720 and 0x30DC. Instead of converting 0x2720, I converted 0x30DC. Undo 0x30DC and convert 0x2720. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: add workaround for power gating in integrated 22000Luca Coelho
Add a workaround that forces power gating to be enabled on integrated 22000 devices. This improves power saving in certain situations. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: mvm: handle iwl_mvm_tvqm_enable_txq() error returnJohannes Berg
iwl_mvm_tvqm_enable_txq() can return an error, notably if unable to allocate memory for the queue. Handle this error throughout, avoiding storing the invalid value into a u16 which later leads to a disable of an invalid queue ("queue 65524 not used", where 65524 is just -ENOMEM in a u16). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix all 9460 entries for qnjLuca Coelho
A bunch of the entries for qnj were wrong. The 9460 device doesn't exist, so update them to 9461 and 9462. There are still a bunch of other occurrences of 9460, but that will be fixed separately. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix PCI ID 0x2720 configs that should be socLuca Coelho
Some entries for PCI ID 0x2720 were using iwl9260_2ac_cfg, but the correct is to use iwl9260_2ac_cfg_soc. Fix that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23rtlwifi: Fix potential overflow on P2P codeLaura Abbott
Nicolas Waisman noticed that even though noa_len is checked for a compatible length it's still possible to overrun the buffers of p2pinfo since there's no check on the upper bound of noa_num. Bound noa_num against P2P_MAX_NOA_NUM. Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23iwlwifi: pcie: fix merge damage on making QnJ exclusiveLuca Coelho
Two patches were sent out of order: one removed some conditions from an if and the other moved the code elsewhere. When sending the patch that moved the code, an older version of the original code was moved, causing the "make QnJ exclusive" code to be essentially undone. Fix that by removing the inclusive conditions from the check again. Fixes: 809805a820c6 ("iwlwifi: pcie: move some cfg mangling from trans_pcie_alloc to probe") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling
2019-10-23Merge tag 'edac_urgent_for_5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Borislav Petkov: "Fix ghes_edac UAF case triggered by KASAN and DEBUG_TEST_DRIVER_REMOVE. Future pending rework of the ghes_edac instances registration will do away with the single memory controller per system model and that ugly hackery there. This is a minimal fix for stable@, courtesy of James Morse" * tag 'edac_urgent_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Fix Use after free in ghes_edac remove path
2019-10-23Merge tag 'for-5.4-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fixes of error handling cleanup of metadata accounting with qgroups enabled - fix swapped values for qgroup tracepoints - fix race when handling full sync flag - don't start unused worker thread, functionality removed already * tag 'for-5.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: check for the full sync flag while holding the inode lock during fsync Btrfs: fix qgroup double free after failure to reserve metadata for delalloc btrfs: tracepoints: Fix bad entry members of qgroup events btrfs: tracepoints: Fix wrong parameter order for qgroup events btrfs: qgroup: Always free PREALLOC META reserve in btrfs_delalloc_release_extents() btrfs: don't needlessly create extent-refs kernel thread btrfs: block-group: Fix a memory leak due to missing btrfs_put_block_group() Btrfs: add missing extents release on file extent cluster relocation error
2019-10-23scripts/nsdeps: use alternative sed delimiterJessica Yu
When doing an out of tree build with O=, the nsdeps script constructs the absolute pathname of the module source file so that it can insert MODULE_IMPORT_NS statements in the right place. However, ${srctree} contains an unescaped path to the source tree, which, when used in a sed substitution, makes sed complain: ++ sed 's/[^ ]* *//home/jeyu/jeyu-linux\/&/g' sed: -e expression #1, char 12: unknown option to `s' The sed substitution command 's' ends prematurely with the forward slashes in the pathname, and sed errors out when it encounters the 'h', which is an invalid sed substitution option. To avoid escaping forward slashes ${srctree}, we can use '|' as an alternative delimiter for sed instead to avoid this error. Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Matthias Maennich <maennich@google.com> Tested-by: Matthias Maennich <maennich@google.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-10-23Merge branch 'opp/fixes' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework fixes for v5.4 from Viresh Kumar: "This contains: - Patch to revert addition of regulator enable/disable in OPP core (Marek). - Remove incorrect lockdep assert (Viresh). - Fix a kref counting issue (Viresh)." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Reinitialize the list_kref before adding the static OPPs again opp: core: Revert "add regulators enable and disable" opp: of: drop incorrect lockdep_assert_held()
2019-10-23virtiofs: Remove set but not used variable 'fc'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: fs/fuse/virtio_fs.c: In function virtio_fs_wake_pending_and_unlock: fs/fuse/virtio_fs.c:983:20: warning: variable fc set but not used [-Wunused-but-set-variable] It is not used since commit 7ee1e2e631db ("virtiofs: No need to check fpq->connected state") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-22fs/dax: Fix pmd vs pte conflict detectionDan Williams
Users reported a v5.3 performance regression and inability to establish huge page mappings. A revised version of the ndctl "dax.sh" huge page unit test identifies commit 23c84eb78375 "dax: Fix missed wakeup with PMD faults" as the source. Update get_unlocked_entry() to check for NULL entries before checking the entry order, otherwise NULL is misinterpreted as a present pte conflict. The 'order' check needs to happen before the locked check as an unlocked entry at the wrong order must fallback to lookup the correct order. Reported-by: Jeff Smits <jeff.smits@intel.com> Reported-by: Doug Nelson <doug.nelson@intel.com> Cc: <stable@vger.kernel.org> Fixes: 23c84eb78375 ("dax: Fix missed wakeup with PMD faults") Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Link: https://lore.kernel.org/r/157167532455.3945484.11971474077040503994.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-10-23opp: Reinitialize the list_kref before adding the static OPPs againViresh Kumar
The list_kref reaches a count of 0 when all the static OPPs are removed, for example when dev_pm_opp_of_cpumask_remove_table() is called, though the actual OPP table may not get freed as it may still be referenced by other parts of the kernel, like from a call to dev_pm_opp_set_supported_hw(). And if we call dev_pm_opp_of_cpumask_add_table() again at this point, we must reinitialize the list_kref otherwise the kernel will hit a WARN() in kref infrastructure for incrementing a kref with value 0. Fixes: 11e1a1648298 ("opp: Don't decrement uninitialized list_kref") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-22bpf: Fix use after free in bpf_get_prog_nameDaniel Borkmann
There is one more problematic case I noticed while recently fixing BPF kallsyms handling in cd7455f1013e ("bpf: Fix use after free in subprog's jited symbol removal") and that is bpf_get_prog_name(). If BTF has been attached to the prog, then we may be able to fetch the function signature type id in kallsyms through prog->aux->func_info[prog->aux->func_idx].type_id. However, while the BTF object itself is torn down via RCU callback, the prog's aux->func_info is immediately freed via kvfree(prog->aux->func_info) once the prog's refcount either hit zero or when subprograms were already exposed via kallsyms and we hit the error path added in 5482e9a93c83 ("bpf: Fix memleak in aux->func_info and aux->btf"). This violates RCU as well since kallsyms could be walked in parallel where we could access aux->func_info. Hence, defer kvfree() to after RCU grace period. Looking at ba64e7d85252 ("bpf: btf: support proper non-jit func info") there is no reason/dependency where we couldn't defer the kvfree(aux->func_info) into the RCU callback. Fixes: 5482e9a93c83 ("bpf: Fix memleak in aux->func_info and aux->btf") Fixes: ba64e7d85252 ("bpf: btf: support proper non-jit func info") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/875f2906a7c1a0691f2d567b4d8e4ea2739b1e88.1571779205.git.daniel@iogearbox.net
2019-10-23ALSA: hda: Add Tigerlake/Jasperlake PCI IDPan Xiuli
Add HD Audio Device PCI ID for the Intel Tigerlake and Jasperlake platform. Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191022194402.23178-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-22ipv6: include <net/addrconf.h> for missing declarationsBen Dooks (Codethink)
Include <net/addrconf.h> for the missing declarations of various functions. Fixes the following sparse warnings: net/ipv6/addrconf_core.c:94:5: warning: symbol 'register_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:100:5: warning: symbol 'unregister_inet6addr_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:106:5: warning: symbol 'inet6addr_notifier_call_chain' was not declared. Should it be static? net/ipv6/addrconf_core.c:112:5: warning: symbol 'register_inet6addr_validator_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:118:5: warning: symbol 'unregister_inet6addr_validator_notifier' was not declared. Should it be static? net/ipv6/addrconf_core.c:125:5: warning: symbol 'inet6addr_validator_notifier_call_chain' was not declared. Should it be static? net/ipv6/addrconf_core.c:237:6: warning: symbol 'in6_dev_finish_destroy' was not declared. Should it be static? Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22net: openvswitch: free vport unless register_netdevice() succeedsHillf Danton
syzbot found the following crash on: HEAD commit: 1e78030e Merge tag 'mmc-v5.3-rc1' of git://git.kernel.org/.. git tree: upstream console output: https://syzkaller.appspot.com/x/log.txt?x=148d3d1a600000 kernel config: https://syzkaller.appspot.com/x/.config?x=30cef20daf3e9977 dashboard link: https://syzkaller.appspot.com/bug?extid=13210896153522fe1ee5 compiler: gcc (GCC) 9.0.0 20181231 (experimental) syz repro: https://syzkaller.appspot.com/x/repro.syz?x=136aa8c4600000 C reproducer: https://syzkaller.appspot.com/x/repro.c?x=109ba792600000 ===================================================================== BUG: memory leak unreferenced object 0xffff8881207e4100 (size 128): comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s) hex dump (first 32 bytes): 00 70 16 18 81 88 ff ff 80 af 8c 22 81 88 ff ff .p.........".... 00 b6 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 ..#............. backtrace: [<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline] [<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline] [<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline] [<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130 [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164 [<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199 [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194 [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614 [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629 [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654 [<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665 [<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328 [<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917 [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline] [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657 [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311 [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356 [<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline] [<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline] [<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363 BUG: memory leak unreferenced object 0xffff88811723b600 (size 64): comm "syz-executor032", pid 7014, jiffies 4294944027 (age 13.830s) hex dump (first 32 bytes): 01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 02 00 00 00 05 35 82 c1 .............5.. backtrace: [<00000000352f46d8>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000352f46d8>] slab_post_alloc_hook mm/slab.h:522 [inline] [<00000000352f46d8>] slab_alloc mm/slab.c:3319 [inline] [<00000000352f46d8>] __do_kmalloc mm/slab.c:3653 [inline] [<00000000352f46d8>] __kmalloc+0x169/0x300 mm/slab.c:3664 [<000000008e48f3d1>] kmalloc include/linux/slab.h:557 [inline] [<000000008e48f3d1>] ovs_vport_set_upcall_portids+0x54/0xd0 net/openvswitch/vport.c:343 [<00000000541e4f4a>] ovs_vport_alloc+0x7f/0xf0 net/openvswitch/vport.c:139 [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164 [<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199 [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194 [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614 [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629 [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654 [<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665 [<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328 [<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917 [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline] [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657 [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311 [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356 BUG: memory leak unreferenced object 0xffff8881228ca500 (size 128): comm "syz-executor032", pid 7015, jiffies 4294944622 (age 7.880s) hex dump (first 32 bytes): 00 f0 27 18 81 88 ff ff 80 ac 8c 22 81 88 ff ff ..'........".... 40 b7 23 17 81 88 ff ff 00 00 00 00 00 00 00 00 @.#............. backtrace: [<000000000eb78212>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<000000000eb78212>] slab_post_alloc_hook mm/slab.h:522 [inline] [<000000000eb78212>] slab_alloc mm/slab.c:3319 [inline] [<000000000eb78212>] kmem_cache_alloc_trace+0x145/0x2c0 mm/slab.c:3548 [<00000000006ea6c6>] kmalloc include/linux/slab.h:552 [inline] [<00000000006ea6c6>] kzalloc include/linux/slab.h:748 [inline] [<00000000006ea6c6>] ovs_vport_alloc+0x37/0xf0 net/openvswitch/vport.c:130 [<00000000f9a04a7d>] internal_dev_create+0x24/0x1d0 net/openvswitch/vport-internal_dev.c:164 [<0000000056ee7c13>] ovs_vport_add+0x81/0x190 net/openvswitch/vport.c:199 [<000000005434efc7>] new_vport+0x19/0x80 net/openvswitch/datapath.c:194 [<00000000b7b253f1>] ovs_dp_cmd_new+0x22f/0x410 net/openvswitch/datapath.c:1614 [<00000000e0988518>] genl_family_rcv_msg+0x2ab/0x5b0 net/netlink/genetlink.c:629 [<00000000d0cc9347>] genl_rcv_msg+0x54/0x9c net/netlink/genetlink.c:654 [<000000006694b647>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<0000000088381f37>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:665 [<00000000dad42a47>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000dad42a47>] netlink_unicast+0x1ec/0x2d0 net/netlink/af_netlink.c:1328 [<0000000067e6b079>] netlink_sendmsg+0x270/0x480 net/netlink/af_netlink.c:1917 [<00000000aab08a47>] sock_sendmsg_nosec net/socket.c:637 [inline] [<00000000aab08a47>] sock_sendmsg+0x54/0x70 net/socket.c:657 [<000000004cb7c11d>] ___sys_sendmsg+0x393/0x3c0 net/socket.c:2311 [<00000000c4901c63>] __sys_sendmsg+0x80/0xf0 net/socket.c:2356 [<00000000c10abb2d>] __do_sys_sendmsg net/socket.c:2365 [inline] [<00000000c10abb2d>] __se_sys_sendmsg net/socket.c:2363 [inline] [<00000000c10abb2d>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2363 ===================================================================== The function in net core, register_netdevice(), may fail with vport's destruction callback either invoked or not. After commit 309b66970ee2 ("net: openvswitch: do not free vport if register_netdevice() is failed."), the duty to destroy vport is offloaded from the driver OTOH, which ends up in the memory leak reported. It is fixed by releasing vport unless device is registered successfully. To do that, the callback assignment is defered until device is registered. Reported-by: syzbot+13210896153522fe1ee5@syzkaller.appspotmail.com Fixes: 309b66970ee2 ("net: openvswitch: do not free vport if register_netdevice() is failed.") Cc: Taehee Yoo <ap420073@gmail.com> Cc: Greg Rose <gvrose8192@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> [sbrivio: this was sent to dev@openvswitch.org and never made its way to netdev -- resending original patch] Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22selftests: Make l2tp.sh executableDavid Ahern
Kernel test robot reported that the l2tp.sh test script failed: # selftests: net: l2tp.sh # Warning: file l2tp.sh is not executable, correct this. Set executable bits. Fixes: e858ef1cd4bc ("selftests: Add l2tp tests") Reported-by: kernel test robot <rong.a.chen@intel.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22net: sched: taprio: fix -Wmissing-prototypes warningsYi Wang
We get one warnings when build kernel W=1: net/sched/sch_taprio.c:1155:6: warning: no previous prototype for ‘taprio_offload_config_changed’ [-Wmissing-prototypes] Make the function static to fix this. Fixes: 9c66d1564676 ("taprio: Add support for hardware offloading") Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22Merge branch 'bnxt_en-bug-fixes'Jakub Kicinski
Michael Chan says: ==================== Devlink and error recovery bug fix patches. Most of the work is by Vasundhara Volam. ==================== Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Avoid disabling pci device in bnxt_remove_one() for already ↵Vasundhara Volam
disabled device. With the recently added error recovery logic, the device may already be disabled if the firmware recovery is unsuccessful. In bnxt_remove_one(), check that the device is still enabled first before calling pci_disable_device(). Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Minor formatting changes in FW devlink_health_reporterVasundhara Volam
Minor formatting changes to diagnose cb for FW devlink health reporter. Suggested-by: Jiri Pirko <jiri@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Adjust the time to wait before polling firmware readiness.Vasundhara Volam
When firmware indicates that driver needs to invoke firmware reset which is common for both error recovery and live firmware reset path, driver needs a different time to wait before polling for firmware readiness. Modify the wait time to fw_reset_min_dsecs, which is initialised to correct timeout for error recovery and firmware reset. Fixes: 4037eb715680 ("bnxt_en: Add a new BNXT_FW_RESET_STATE_POLL_FW_DOWN state.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Fix devlink NVRAM related byte order related issues.Michael Chan
The current code does not do endian swapping between the devlink parameter and the internal NVRAM representation. Define a union to represent the little endian NVRAM data and add 2 helper functions to copy to and from the NVRAM data with the proper byte swapping. Fixes: 782a624d00fa ("bnxt_en: Add bnxt_en initial port params table and register it") Cc: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bnxt_en: Fix the size of devlink MSIX parameters.Vasundhara Volam
The current code that rounds up the NVRAM parameter bit size to the next byte size for the devlink parameter is not always correct. The MSIX devlink parameters are 4 bytes and we don't get the correct size using this method. Fix it by adding a new dl_num_bytes member to the bnxt_dl_nvm_param structure which statically provides bytesize information according to the devlink parameter type definition. Fixes: 782a624d00fa ("bnxt_en: Add bnxt_en initial port params table and register it") Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22net: stmmac: Fix the problem of tso_xmityuqi jin
When the address width of DMA is greater than 32, the packet header occupies a BD descriptor. The starting address of the data should be added to the header length. Fixes: a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: yuqi jin <jinyuqi@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22dynamic_debug: provide dynamic_hex_dump stubArnd Bergmann
The ionic driver started using dymamic_hex_dump(), but that is not always defined: drivers/net/ethernet/pensando/ionic/ionic_main.c:229:2: error: implicit declaration of function 'dynamic_hex_dump' [-Werror,-Wimplicit-function-declaration] Add a dummy implementation to use when CONFIG_DYNAMIC_DEBUG is disabled, printing nothing. Fixes: 938962d55229 ("ionic: Add adminq action") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22bpf: Fix use after free in subprog's jited symbol removalDaniel Borkmann
syzkaller managed to trigger the following crash: [...] BUG: unable to handle page fault for address: ffffc90001923030 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD aa551067 P4D aa551067 PUD aa552067 PMD a572b067 PTE 80000000a1173163 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 7982 Comm: syz-executor912 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bpf_jit_binary_hdr include/linux/filter.h:787 [inline] RIP: 0010:bpf_get_prog_addr_region kernel/bpf/core.c:531 [inline] RIP: 0010:bpf_tree_comp kernel/bpf/core.c:600 [inline] RIP: 0010:__lt_find include/linux/rbtree_latch.h:115 [inline] RIP: 0010:latch_tree_find include/linux/rbtree_latch.h:208 [inline] RIP: 0010:bpf_prog_kallsyms_find kernel/bpf/core.c:674 [inline] RIP: 0010:is_bpf_text_address+0x184/0x3b0 kernel/bpf/core.c:709 [...] Call Trace: kernel_text_address kernel/extable.c:147 [inline] __kernel_text_address+0x9a/0x110 kernel/extable.c:102 unwind_get_return_address+0x4c/0x90 arch/x86/kernel/unwind_frame.c:19 arch_stack_walk+0x98/0xe0 arch/x86/kernel/stacktrace.c:26 stack_trace_save+0xb6/0x150 kernel/stacktrace.c:123 save_stack mm/kasan/common.c:69 [inline] set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc+0x11c/0x1b0 mm/kasan/common.c:510 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:518 slab_post_alloc_hook mm/slab.h:584 [inline] slab_alloc mm/slab.c:3319 [inline] kmem_cache_alloc+0x1f5/0x2e0 mm/slab.c:3483 getname_flags+0xba/0x640 fs/namei.c:138 getname+0x19/0x20 fs/namei.c:209 do_sys_open+0x261/0x560 fs/open.c:1091 __do_sys_open fs/open.c:1115 [inline] __se_sys_open fs/open.c:1110 [inline] __x64_sys_open+0x87/0x90 fs/open.c:1110 do_syscall_64+0xf7/0x1c0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe [...] After further debugging it turns out that we walk kallsyms while in parallel we tear down a BPF program which contains subprograms that have been JITed though the program itself has not been fully exposed and is eventually bailing out with error. The bpf_prog_kallsyms_del_subprogs() in bpf_prog_load()'s error path removes the symbols, however, bpf_prog_free() tears down the JIT memory too early via scheduled work. Instead, it needs to properly respect RCU grace period as the kallsyms walk for BPF is under RCU. Fix it by refactoring __bpf_prog_put()'s tear down and reuse it in our error path where we defer final destruction when we have subprogs in the program. Fixes: 7d1982b4e335 ("bpf: fix panic in prog load calls cleanup") Fixes: 1c2a088a6626 ("bpf: x64: add JIT support for multi-function programs") Reported-by: syzbot+710043c5d1d5b5013bc7@syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: syzbot+710043c5d1d5b5013bc7@syzkaller.appspotmail.com Link: https://lore.kernel.org/bpf/55f6367324c2d7e9583fa9ccf5385dcbba0d7a6e.1571752452.git.daniel@iogearbox.net
2019-10-22RDMA/uverbs: Prevent potential underflowDan Carpenter
The issue is in drivers/infiniband/core/uverbs_std_types_cq.c in the UVERBS_HANDLER(UVERBS_METHOD_CQ_CREATE) function. We check that: if (attr.comp_vector >= attrs->ufile->device->num_comp_vectors) { But we don't check if "attr.comp_vector" is negative. It could potentially lead to an array underflow. My concern would be where cq->vector is used in the create_cq() function from the cxgb4 driver. And really "attr.comp_vector" is appears as a u32 to user space so that's the right type to use. Fixes: 9ee79fce3642 ("IB/core: Add completion queue (cq) object actions") Link: https://lore.kernel.org/r/20191011133419.GA22905@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-22KVM: nVMX: Don't leak L1 MMIO regions to L2Jim Mattson
If the "virtualize APIC accesses" VM-execution control is set in the VMCS, the APIC virtualization hardware is triggered when a page walk in VMX non-root mode terminates at a PTE wherein the address of the 4k page frame matches the APIC-access address specified in the VMCS. On hardware, the APIC-access address may be any valid 4k-aligned physical address. KVM's nVMX implementation enforces the additional constraint that the APIC-access address specified in the vmcs12 must be backed by a "struct page" in L1. If not, L0 will simply clear the "virtualize APIC accesses" VM-execution control in the vmcs02. The problem with this approach is that the L1 guest has arranged the vmcs12 EPT tables--or shadow page tables, if the "enable EPT" VM-execution control is clear in the vmcs12--so that the L2 guest physical address(es)--or L2 guest linear address(es)--that reference the L2 APIC map to the APIC-access address specified in the vmcs12. Without the "virtualize APIC accesses" VM-execution control in the vmcs02, the APIC accesses in the L2 guest will directly access the APIC-access page in L1. When there is no mapping whatsoever for the APIC-access address in L1, the L2 VM just loses the intended APIC virtualization. However, when the APIC-access address is mapped to an MMIO region in L1, the L2 guest gets direct access to the L1 MMIO device. For example, if the APIC-access address specified in the vmcs12 is 0xfee00000, then L2 gets direct access to L1's APIC. Since this vmcs12 configuration is something that KVM cannot faithfully emulate, the appropriate response is to exit to userspace with KVM_INTERNAL_ERROR_EMULATION. Fixes: fe3ef05c7572 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12") Reported-by: Dan Cross <dcross@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-12 05:42:08 +0000