summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-22ARC: perf: Accommodate big-endian CPUAlexey Brodkin
8-letter strings representing ARC perf events are stores in two 32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc. And the same order of bytes in the word is used regardless CPU endianness. Which means in case of big-endian CPU core we need to swap bytes to get the same order as if it was on little-endian CPU. Otherwise we're seeing the following error message on boot: ------------------------->8---------------------- ARC perf : 8 counters (32 bits), 40 conditions, [overflow IRQ support] sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 sysfs_warn_dup+0x46/0x58 sysfs_add_file_mode_ns+0xb2/0x168 create_files+0x70/0x2a0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0 Failed to register pmu: arc_pct, reason -17 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3 Stack Trace: arc_unwind_core+0xd4/0xfc dump_stack+0x64/0x80 __warn+0x9c/0xd4 warn_slowpath_fmt+0x22/0x2c perf_event_sysfs_init+0x70/0xa0 ---[ end trace a75fb9a9837bd1ec ]--- ------------------------->8---------------------- What happens here we're trying to register more than one raw perf event with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters and encoded into two 32-bit words. In this particular case we deal with 2 events: * "IJMP____" which counts all jump & branch instructions * "IJMPC___" which counts only conditional jumps & branches Those strings are split in two 32-bit words this way "IJMP" + "____" & "IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core being big-endian then we read "PMJI" + "____" & "PMJI" + "___C". And since we interpret read array of ASCII letters as a null-terminated string on big-endian CPU we end up with 2 events of the same name "PMJI". Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-boardi SPI ADC ICEugeniy Paltsev
HSDK board has adc108s102 SPI ADC IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22ARC: [plat-hsdk]: Enable on-board SPI NOR flash ICEugeniy Paltsev
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-10-22KVM: SVM: Fix potential wrong physical id in avic_handle_ldr_updateMiaohe Lin
Guest physical APIC ID may not equal to vcpu->vcpu_id in some case. We may set the wrong physical id in avic_handle_ldr_update as we always use vcpu->vcpu_id. Get physical APIC ID from vAPIC page instead. Export and use kvm_xapic_id here and in avic_handle_apic_id_update as suggested by Vitaly. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22Merge branch 'misc' into fixesRussell King
2019-10-22cpufreq: Cancel policy update work scheduled before freeingSudeep Holla
Scheduled policy update work may end up racing with the freeing of the policy and unregistering the driver. One possible race is as below, where the cpufreq_driver is unregistered, but the scheduled work gets executed at later stage when, cpufreq_driver is NULL (i.e. after freeing the policy and driver). Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = (ptrval) [0000001c] *pgd=80000080204003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP THUMB2 Modules linked in: CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86 Hardware name: ARM-Versatile Express Workqueue: events handle_update PC is at cpufreq_set_policy+0x58/0x228 LR is at dev_pm_qos_read_value+0x77/0xac Control: 70c5387d Table: 80203000 DAC: fffffffd Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval)) (cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48) (refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38) (handle_update) from (process_one_work+0x16d/0x3cc) (process_one_work) from (worker_thread+0xff/0x414) (worker_thread) from (kthread+0xff/0x100) (kthread) from (ret_from_fork+0x11/0x28) Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> [ rjw: Cancel the work before dropping the QoS requests ] Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22s390/kaslr: add support for R_390_GLOB_DAT relocation typeGerald Schaefer
Commit "bpf: Process in-kernel BTF" in linux-next introduced an undefined __weak symbol, which results in an R_390_GLOB_DAT relocation type. That is not yet handled by the KASLR relocation code, and the kernel stops with the message "Unknown relocation type". Add code to detect and handle R_390_GLOB_DAT relocation types and undefined symbols. Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel") Cc: <stable@vger.kernel.org> # v5.2+ Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-22s390/zcrypt: fix memleak at releaseJohan Hovold
If a process is interrupted while accessing the crypto device and the global ap_perms_mutex is contented, release() could return early and fail to free related resources. Fixes: 00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support") Cc: <stable@vger.kernel.org> # 4.19 Cc: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-10-22ALSA: usb-audio: Fix copy&paste error in the validatorTakashi Iwai
The recently introduced USB-audio descriptor validator had a stupid copy&paste error that may lead to an unexpected overlook of too short descriptors for processing and extension units. It's likely the cause of the report triggered by syzkaller fuzzer. Let's fix it. Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units") Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-22perf/aux: Fix AUX output stoppingAlexander Shishkin
Commit: 8a58ddae2379 ("perf/core: Fix exclusive events' grouping") allows CAP_EXCLUSIVE events to be grouped with other events. Since all of those also happen to be AUX events (which is not the case the other way around, because arch/s390), this changes the rules for stopping the output: the AUX event may not be on its PMU's context any more, if it's grouped with a HW event, in which case it will be on that HW event's context instead. If that's the case, munmap() of the AUX buffer can't find and stop the AUX event, potentially leaving the last reference with the atomic context, which will then end up freeing the AUX buffer. This will then trip warnings: Fix this by using the context's PMU context when looking for events to stop, instead of the event's PMU context. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20191022073940.61814-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-22Merge tag 'kvm-ppc-fixes-5.4-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM fix for 5.4 - Fix a bug in the XIVE code which can cause a host crash.
2019-10-22Merge tag 'kvmarm-fixes-5.4-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.4, take #2 Special PMU edition: - Fix cycle counter truncation - Fix cycle counter overflow limit on pure 64bit system - Allow chained events to be actually functional - Correct sample period after overflow
2019-10-22kvm: clear kvmclock MSR on resetPaolo Bonzini
After resetting the vCPU, the kvmclock MSR keeps the previous value but it is not enabled. This can be confusing, so fix it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: x86: fix bugon.cocci warningskbuild test robot
Use BUG_ON instead of a if condition followed by BUG. Generated by: scripts/coccinelle/misc/bugon.cocci Fixes: 4b526de50e39 ("KVM: x86: Check kvm_rebooting in kvm_spurious_fault()") CC: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: VMX: Remove specialized handling of unexpected exit-reasonsLiran Alon
Commit bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit") introduced specialized handling of specific exit-reasons that should not be raised by CPU because KVM configures VMCS such that they should never be raised. However, since commit 7396d337cfad ("KVM: x86: Return to userspace with internal error on unexpected exit reason"), VMX & SVM exit handlers were modified to generically handle all unexpected exit-reasons by returning to userspace with internal error. Therefore, there is no need for specialized handling of specific unexpected exit-reasons (This specialized handling also introduced inconsistency for these exit-reasons to silently skip guest instruction instead of return to userspace on internal-error). Fixes: bf653b78f960 ("KVM: vmx: Introduce handle_unexpected_vmexit and handle WAITPKG vmexit") Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: fix sync_regs_test with newer gccsVitaly Kuznetsov
Commit 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") was intended to make test more gcc-proof, however, the result is exactly the opposite: on newer gccs (e.g. 8.2.1) the test breaks with ==== Test Assertion Failure ==== x86_64/sync_regs_test.c:168: run->s.regs.regs.rbx == 0xBAD1DEA + 1 pid=14170 tid=14170 - Invalid argument 1 0x00000000004015b3: main at sync_regs_test.c:166 (discriminator 6) 2 0x00007f413fb66412: ?? ??:0 3 0x000000000040191d: _start at ??:? rbx sync regs value incorrect 0x1. Apparently, compile is still free to play games with registers even when they have variables attached. Re-write guest code with 'asm volatile' by embedding ucall there and making sure rbx is preserved. Fixes: 204c91eff798a ("KVM: selftests: do not blindly clobber registers in guest asm") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: vmx_dirty_log_test: skip the test when VMX is not supportedVitaly Kuznetsov
vmx_dirty_log_test fails on AMD and this is no surprise as it is VMX specific. Bail early when nested VMX is unsupported. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: consolidate VMX support checksVitaly Kuznetsov
vmx_* tests require VMX and three of them implement the same check. Move it to vmx library. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: vmx_set_nested_state_test: don't check for VMX support twiceVitaly Kuznetsov
vmx_set_nested_state_test() checks if VMX is supported twice: in the very beginning (and skips the whole test if it's not) and before doing test_vmx_nested_state(). One should be enough. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabledWanpeng Li
Don't waste cycles to shrink/grow vCPU halt_poll_ns if host side polling is disabled. Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22selftests: kvm: synchronize .gitignore to MakefileVitaly Kuznetsov
Because "Untracked files:" are annoying. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUIDJim Mattson
When the RDPID instruction is supported on the host, enumerate it in KVM_GET_SUPPORTED_CPUID. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-22Merge tag 'pinctrl-v5.4-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Here is a bunch of pin control fixes. I was lagging behind on this one, some fixes should have come in earlier, sorry about that. Anyways here it is, pretty straight-forward fixes, the Strago fix stand out as something serious affecting a lot of machines. Summary: - Handle multiple instances of Intel chips without complaining. - Restore the Intel Strago DMI workaround - Make the Armada 37xx handle pins over 32 - Fix the polarity of the LED group on Armada 37xx - Fix an off-by-one bug in the NS2 driver - Fix error path for iproc's platform_get_irq() - Fix error path on the STMFX driver - Fix a typo in the Berlin AS370 driver - Fix up misc errors in the Aspeed 2600 BMC support - Fix a stray SPDX tag" * tag 'pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: aspeed-g6: Rename SD3 to EMMC and rework pin groups pinctrl: aspeed-g6: Fix UART13 group pinmux pinctrl: aspeed-g6: Make SIG_DESC_CLEAR() behave intuitively pinctrl: aspeed-g6: Fix I3C3/I3C4 pinmux configuration pinctrl: aspeed-g6: Fix I2C14 SDA description pinctrl: aspeed-g6: Sort pins for sanity dt-bindings: pinctrl: aspeed-g6: Rework SD3 function and groups pinctrl: berlin: as370: fix a typo s/spififib/spdifib pinctrl: armada-37xx: swap polarity on LED group pinctrl: stmfx: fix null pointer on remove pinctrl: iproc: allow for error from platform_get_irq() pinctrl: ns2: Fix off by one bugs in ns2_pinmux_enable() pinctrl: bcm-iproc: Use SPDX header pinctrl: armada-37xx: fix control of pins 32 and up pinctrl: cherryview: restore Strago DMI workaround for all versions pinctrl: intel: Allocate IRQ chip dynamic
2019-10-22cpuidle: haltpoll: Take 'idle=' override into accountZhenzhong Duan
Currenly haltpoll isn't aware of the 'idle=' override, the priority is 'idle=poll' > haltpoll > 'idle=halt'. When 'idle=poll' is used, cpuidle driver is bypassed but current_driver in sys still shows 'haltpoll'. When 'idle=halt' is used, haltpoll takes precedence and makes 'idle=halt' have no effect. Add a check to prevent the haltpoll driver from loading if 'idle=' is present. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Co-developed-by: Joao Martins <joao.m.martins@oracle.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-22ACPI: NFIT: Fix unlock on error in scrub_show()Dan Carpenter
We change the locking in this function and forgot to update this error path so we are accidentally still holding the "dev->lockdep_mutex". Fixes: 87a30e1f05d7 ("driver-core, libnvdimm: Let device subsystems add local lockdep coverage") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-10-21tracing: Fix race in perf_trace_buf initializationPrateek Sood
A race condition exists while initialiazing perf_trace_buf from perf_trace_init() and perf_kprobe_init(). CPU0 CPU1 perf_trace_init() mutex_lock(&event_mutex) perf_trace_event_init() perf_trace_event_reg() total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() //fails perf_kprobe_init() goto fail perf_trace_event_init() perf_trace_event_reg() fail: total_ref_count == 0 total_ref_count == 0 buf = alloc_percpu() perf_trace_buf[i] = buf tp_event->class->reg() total_ref_count++ free_percpu(perf_trace_buf[i]) perf_trace_buf[i] = NULL Any subsequent call to perf_trace_event_reg() will observe total_ref_count > 0, causing the perf_trace_buf to be always NULL. This can result in perf_trace_buf getting accessed from perf_trace_buf_alloc() without being initialized. Acquiring event_mutex in perf_kprobe_init() before calling perf_trace_event_init() should fix this race. The race caused the following bug: Unable to handle kernel paging request at virtual address 0000003106f2003c Mem abort info: ESR = 0x96000045 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000045 CM = 0, WnR = 1 user pgtable: 4k pages, 39-bit VAs, pgdp = ffffffc034b9b000 [0000003106f2003c] pgd=0000000000000000, pud=0000000000000000 Internal error: Oops: 96000045 [#1] PREEMPT SMP Process syz-executor (pid: 18393, stack limit = 0xffffffc093190000) pstate: 80400005 (Nzcv daif +PAN -UAO) pc : __memset+0x20/0x1ac lr : memset+0x3c/0x50 sp : ffffffc09319fc50 __memset+0x20/0x1ac perf_trace_buf_alloc+0x140/0x1a0 perf_trace_sys_enter+0x158/0x310 syscall_trace_enter+0x348/0x7c0 el0_svc_common+0x11c/0x368 el0_svc_handler+0x12c/0x198 el0_svc+0x8/0xc Ramdumps showed the following: total_ref_count = 3 perf_trace_buf = ( 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL, 0x0 -> NULL) Link: http://lkml.kernel.org/r/1571120245-4186-1-git-send-email-prsood@codeaurora.org Cc: stable@vger.kernel.org Fixes: e12f03d7031a9 ("perf/core: Implement the 'perf_kprobe' PMU") Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-10-22x86/cpu/vmware: Fix platform detection VMWARE_PORT macroThomas Hellstrom
The platform detection VMWARE_PORT macro uses the VMWARE_HYPERVISOR_PORT definition, but expects it to be an integer. However, when it was moved to the new vmware.h include file, it was changed to be a string to better fit into the VMWARE_HYPERCALL set of macros. This obviously breaks the platform detection VMWARE_PORT functionality. Change the VMWARE_HYPERVISOR_PORT and VMWARE_HYPERVISOR_PORT_HB definitions to be integers, and use __stringify() for their stringified form when needed. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions") Link: https://lkml.kernel.org/r/20191021172403.3085-3-thomas_os@shipmail.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-22x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvmThomas Hellstrom
LLVM's assembler doesn't accept the short form INL instruction: inl (%%dx) but instead insists on the output register to be explicitly specified. This was previously fixed for the VMWARE_PORT macro. Fix it also for the VMWARE_HYPERCALL macro. Suggested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: clang-built-linux@googlegroups.com Fixes: b4dd4f6e3648 ("Add a header file for hypercall definitions") Link: https://lkml.kernel.org/r/20191021172403.3085-2-thomas_os@shipmail.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-21xdp: Handle device unregister for devmap_hash map typeToke Høiland-Jørgensen
It seems I forgot to add handling of devmap_hash type maps to the device unregister hook for devmaps. This omission causes devices to not be properly released, which causes hangs. Fix this by adding the missing handler. Fixes: 6f9d451ab1a3 ("xdp: Add devmap_hash map type for looking up devices by hashed index") Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20191019111931.2981954-1-toke@redhat.com
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes-part2' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoC Device Tree fixes for 5.4, please pull the following: - Stefan removes the activity LED node from the CM3 DTS since there is no driver for that LED yet and leds-gpio cannot drive it either * tag 'arm-soc/for-5.4/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue Link: https://lore.kernel.org/r/20191021194302.21024-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.4, please pull the following: - Stefan fixes the MMC controller bus-width property for the Raspberry Pi Zero Wireless which was incorrect after a prior refactoring * tag 'arm-soc/for-5.4/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci Link: https://lore.kernel.org/r/20191015172356.9650-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'davinci-fixes-for-v5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes DaVinci fixes for v5.4 ====================== * fix GPIO backlight support on DA850 by enabling the needed config in davinci_all_defconfig. This is a fix because the driver and board support got converted to use BACKLIGHT_GPIO driver, but defconfig update is still missing in v5.4. * fix for McBSP DMA on DM365 * tag 'davinci-fixes-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci_all_defconfig: enable GPIO backlight ARM: davinci: dm365: Fix McBSP dma_slave_map entry Link: https://lore.kernel.org/r/7f3393f9-59be-a2d4-c1e1-ba6e407681d1@ti.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'v5.4-rockchip-dtsfixes1' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes A number of fixes for individual boards like the rockpro64, and Hugsun X99 as well as a fix for the Gru-Kevin display override and fixing the dt- binding for Theobroma boards to the correct naming that is also actually used in the wild. * tag 'v5.4-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix override mode for rk3399-kevin panel arm64: dts: rockchip: Fix usb-c on Hugsun X99 TV Box arm64: dts: rockchip: fix RockPro64 sdmmc settings arm64: dts: rockchip: fix RockPro64 sdhci settings arm64: dts: rockchip: fix RockPro64 vdd-log regulator settings dt-bindings: arm: rockchip: fix Theobroma-System board bindings arm64: dts: rockchip: fix Rockpro64 RK808 interrupt line Link: https://lore.kernel.org/r/1599050.HRXuSXmxRg@phil Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'imx-fixes-5.4' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.4: - Re-enable SNVS power key for imx6q-logicpd board which was accidentally disabled by a SoC level change. - Fix I2C switches on vf610-zii-scu4-aib board by specifying property i2c-mux-idle-disconnect. - A fix on imx-scu API that reads UID from firmware to avoid kernel NULL pointer dump. - A series from Anson to correct i.MX7 GPT and i.MX8 USDHC IPG clock. - A fix on DRM_MSM Kconfig regression on i.MX5 by adding the option explicitly into imx_v6_v7_defconfig. - Fix ARM regulator states issue for zii-ultra board, which is impacting stability of the board. - A correction on CPU core idle state name for LayerScape LX2160A SoC. * tag 'imx-fixes-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk ARM: dts: imx7s: Correct GPT's ipg clock source ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' ARM: dts: imx6q-logicpd: Re-Enable SNVS power key arm64: dts: lx2160a: Correct CPU core idle state name arm64: dts: zii-ultra: fix ARM regulator states soc: imx: imx-scu: Getting UID from SCU should have response Link: https://lore.kernel.org/r/20191017141851.GA22506@dragon Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21Merge tag 'omap-for-v5.4/fixes-rc3-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.4-rc cycle More fixes for omap variants: - Update more panel options in omap2plus_defconfig that got changed as we moved to use generic LCD panels - Remove unused twl_keypad for logicpd-torpedo-som to avoid boot time warnings. This is only a cosmetic fix, but at least dmesg output is now getting more readable after all the fixes to remove pointless warnings - Fix gpu_cm node name as we still have a non-standard node name dependency for clocks. This should eventually get fixed by use of domain specific compatible property - Fix use of i2c-mux-idle-disconnect for m3874-iceboard - Use level interrupt for omap4 & 5 wlcore to avoid lost edge interrupts * tag 'omap-for-v5.4/fixes-rc3-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Use level interrupt for omap4 & 5 wlcore ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage ARM: dts: omap5: fix gpu_cm clock provider name ARM: dts: logicpd-torpedo-som: Remove twl_keypad ARM: omap2plus_defconfig: Fix selected panels after generic panel changes Link: https://lore.kernel.org/r/pull-1571242890-118432@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21r8152: add device id for Lenovo ThinkPad USB-C Dock Gen 2Kazutoshi Noguchi
This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'. Chipset is RTL8153 and works with r8152. Without this, the generic cdc_ether grabs the device, and the device jam connected networks up when the machine suspends. Signed-off-by: Kazutoshi Noguchi <noguchi.kazutosi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21Merge tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM64-based SoCs Device Tree fixes for 5.4, please pull the following: - Rayangonda fixes the GPIO pins assignment for the Stringray SoCs * tag 'arm-soc/for-5.4/devicetree-arm64-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: Fix gpio to pinmux mapping Link: https://lore.kernel.org/r/20191015172356.9650-2-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-21ipv4: fix IPSKB_FRAG_PMTU handling with fragmentationEric Dumazet
This patch removes the iph field from the state structure, which is not properly initialized. Instead, add a new field to make the "do we want to set DF" be the state bit and move the code to set the DF flag from ip_frag_next(). Joint work with Pablo and Linus. Fixes: 19c3401a917b ("net: ipv4: place control buffer handling away from fragmentation iterators") Reported-by: Patrick Schönthaler <patrick@notvads.ovh> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21ARM: 8926/1: v7m: remove register save to stack before svcafzal mohammed
r0-r3 & r12 registers are saved & restored, before & after svc respectively. Intention was to preserve those registers across thread to handler mode switch. On v7-M, hardware saves the register context upon exception in AAPCS complaint way. Restoring r0-r3 & r12 is done from stack location where hardware saves it, not from the location on stack where these registers were saved. To clarify, on stm32f429 discovery board: 1. before svc, sp - 0x90009ff8 2. r0-r3,r12 saved to 0x90009ff8 - 0x9000a00b 3. upon svc, h/w decrements sp by 32 & pushes registers onto stack 4. after svc, sp - 0x90009fd8 5. r0-r3,r12 restored from 0x90009fd8 - 0x90009feb Above means r0-r3,r12 is not restored from the location where they are saved, but since hardware pushes the registers onto stack, the registers are restored correctly. Note that during register saving to stack (step 2), it goes past 0x9000a000. And it seems, based on objdump, there are global symbols residing there, and it perhaps can cause issues on a non-XIP Kernel (on XIP, data section is setup later). Based on the analysis above, manually saving registers onto stack is at best no-op and at worst can cause data section corruption. Hence remove storing of registers onto stack before svc. Fixes: b70cd406d7fe ("ARM: 8671/1: V7M: Preserve registers across switch from Thread to Handler mode") Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-21Input: st1232 - fix reporting multitouch coordinatesDixit Parmar
For Sitronix st1633 multi-touch controller driver the coordinates reported for multiple fingers were wrong, as it was always taking LSB of coordinates from the first contact data. Signed-off-by: Dixit Parmar <dixitparmar19@gmail.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Cc: stable@vger.kernel.org Fixes: 351e0592bfea ("Input: st1232 - add support for st1633") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204561 Link: https://lore.kernel.org/r/1566209314-21767-1-git-send-email-dixitparmar19@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-10-21Merge tag 'mlx5-fixes-2019-10-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 kTLS fixes 18-10-2019 This series introduces kTLS related fixes to mlx5 driver from Tariq, and two misc memory leak fixes form Navid Emamdoost. Please pull and let me know if there is any problem. I would appreciate it if you queue up kTLS fixes from the list below to stable kernel v5.3 ! For -stable v4.13: nett/mlx5: prevent memory leak in mlx5_fpga_conn_create_cq ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-21mmc: mxs: fix flags passed to dmaengine_prep_slave_sgSascha Hauer
Since ceeeb99cd821 we no longer abuse the DMA_CTRL_ACK flag for custom driver use and introduced the MXS_DMA_CTRL_WAIT4END instead. We have not changed all users to this flag though. This patch fixes it for the mxs-mmc driver. Fixes: ceeeb99cd821 ("dmaengine: mxs: rename custom flag") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Fabio Estevam <festevam@gmail.com> Reported-by: Bruno Thomsen <bruno.thomsen@gmail.com> Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-10-21virtiofs: Retry request submission from worker contextVivek Goyal
If regular request queue gets full, currently we sleep for a bit and retrying submission in submitter's context. This assumes submitter is not holding any spin lock. But this assumption is not true for background requests. For background requests, we are called with fc->bg_lock held. This can lead to deadlock where one thread is trying submission with fc->bg_lock held while request completion thread has called fuse_request_end() which tries to acquire fc->bg_lock and gets blocked. As request completion thread gets blocked, it does not make further progress and that means queue does not get empty and submitter can't submit more requests. To solve this issue, retry submission with the help of a worker, instead of retrying in submitter's context. We already do this for hiprio/forget requests. Reported-by: Chirantan Ekbote <chirantan@chromium.org> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21virtiofs: Count pending forgets as in_flight forgetsVivek Goyal
If virtqueue is full, we put forget requests on a list and these forgets are dispatched later using a worker. As of now we don't count these forgets in fsvq->in_flight variable. This means when queue is being drained, we have to have special logic to first drain these pending requests and then wait for fsvq->in_flight to go to zero. By counting pending forgets in fsvq->in_flight, we can get rid of special logic and just wait for in_flight to go to zero. Worker thread will kick and drain all the forgets anyway, leading in_flight to zero. I also need similar logic for normal request queue in next patch where I am about to defer request submission in the worker context if queue is full. This simplifies the code a bit. Also add two helper functions to inc/dec in_flight. Decrement in_flight helper will later used to call completion when in_flight reaches zero. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21virtiofs: Set FR_SENT flag only after request has been sentVivek Goyal
FR_SENT flag should be set when request has been sent successfully sent over virtqueue. This is used by interrupt logic to figure out if interrupt request should be sent or not. Also add it to fqp->processing list after sending it successfully. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21virtiofs: No need to check fpq->connected stateVivek Goyal
In virtiofs we keep per queue connected state in virtio_fs_vq->connected and use that to end request if queue is not connected. And virtiofs does not even touch fpq->connected state. We probably need to merge these two at some point of time. For now, simplify the code a bit and do not worry about checking state of fpq->connected. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21virtiofs: Do not end request in submission contextVivek Goyal
Submission context can hold some locks which end request code tries to hold again and deadlock can occur. For example, fc->bg_lock. If a background request is being submitted, it might hold fc->bg_lock and if we could not submit request (because device went away) and tried to end request, then deadlock happens. During testing, I also got a warning from deadlock detection code. So put requests on a list and end requests from a worker thread. I got following warning from deadlock detector. [ 603.137138] WARNING: possible recursive locking detected [ 603.137142] -------------------------------------------- [ 603.137144] blogbench/2036 is trying to acquire lock: [ 603.137149] 00000000f0f51107 (&(&fc->bg_lock)->rlock){+.+.}, at: fuse_request_end+0xdf/0x1c0 [fuse] [ 603.140701] [ 603.140701] but task is already holding lock: [ 603.140703] 00000000f0f51107 (&(&fc->bg_lock)->rlock){+.+.}, at: fuse_simple_background+0x92/0x1d0 [fuse] [ 603.140713] [ 603.140713] other info that might help us debug this: [ 603.140714] Possible unsafe locking scenario: [ 603.140714] [ 603.140715] CPU0 [ 603.140716] ---- [ 603.140716] lock(&(&fc->bg_lock)->rlock); [ 603.140718] lock(&(&fc->bg_lock)->rlock); [ 603.140719] [ 603.140719] *** DEADLOCK *** Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21fuse: don't advise readdirplus for negative lookupMiklos Szeredi
If the FUSE_READDIRPLUS_AUTO feature is enabled, then lookups on a directory before/during readdir are used as an indication that READDIRPLUS should be used instead of READDIR. However if the lookup turns out to be negative, then selecting READDIRPLUS makes no sense. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2019-10-21drm/komeda: Fix typos in komeda_splitter_validateMihail Atanassov
Fix both the string and the struct member being printed. Changes since v1: - Now with a bonus grammar fix, too. Fixes: 264b9436d23b ("drm/komeda: Enable writeback split support") Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190930122231.33029-1-mihail.atanassov@arm.com
2019-10-21drm/komeda: Don't flush inactive pipesMihail Atanassov
HW doesn't allow flushing inactive pipes and raises an MERR interrupt if you try to do so. Stop triggering the MERR interrupt in the middle of a commit by calling drm_atomic_helper_commit_planes with the ACTIVE_ONLY flag. Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191010102950.56253-1-mihail.atanassov@arm.com
generated by cgit (git 2.34.1) at 2025-09-12 19:54:50 +0000