| Age | Commit message (Collapse) | Author |
|---|
|
platform_get_irq() already prints an error for us.
Fix this cocci warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2664:2-9: line 2664 is redundant because platform_get_irq() already prints an error
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20240506-fix-broad-v2-2-e6a2a5c0d609@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
platform_get_irq() cannot return the value 0. It will either return a non-zero
irq or a errcode.
If a errcode is returned, we need to populate the error code upwards. It will
give a more accurate reason of why it failed to the caller, who might decide
to retry later.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240506-fix-broad-v2-1-e6a2a5c0d609@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240506100917.1544174-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The linked commit updated dso__load_vmlinux() to call
dso__set_long_name() before loading the symbols. Loading the symbols may
not succeed but dso__set_long_name() takes ownership of the string. The
two callers of this function free the string themselves on failure
cases, resulting in the following error:
$ perf record -- ls
$ perf report
free(): double free detected in tcache 2
Fix it by always taking ownership of the string, even on failure. This
means the string is either freed at the very first early exit condition,
or later when the dso is deleted or the long name is replaced. Now no
special return value is needed to signify that the caller needs to
free the string.
Fixes: e59fea47f83e8a9a ("perf symbols: Fix DSO kernel load and symbol process to correctly map DSO to its long_name, type and adjust_symbols")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When loading kcore, the main vmlinux map is updated in the same loop
that merges the remaining maps. If a map that overlaps is merged in
before kcore, the list can become unsortable when the main map addresses
are updated. This will later trigger the check_invariants() assert:
$ perf record
$ perf report
util/maps.c:96: check_invariants: Assertion `map__end(prev) <=
map__start(map) || map__start(prev) == map__start(map)' failed.
Aborted
Fix it by moving the main map update prior to the loop so that
maps__merge_in() can split it if necessary.
Fixes: 659ad3492b913c90 ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
maps__merge_in() hard codes the steps to free the maps_by_name list. It
seems to not map__put() each element before freeing, and it sets
maps_by_name_sorted to true after freeing, which may be harmless but
is inconsistent with maps__init() and other functions.
maps__maps_by_name_addr() is also quite hard to read because we already
have maps__maps_by_name() and maps__maps_by_address(), but the function
is only used in that place so delete it.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Make the order of operations remove, update, add. Updating addresses
before the map is removed causes the ordering check to fail when the map
is removed. This can be reproduced when running Perf on an Arm system
with a static kernel and Perf uses kcore rather than other sources:
$ perf record -- ls
$ perf report
util/maps.c:96: check_invariants: Assertion `map__end(prev) <=
map__start(map) || map__start(prev) == map__start(map)' failed
Fixes: 659ad3492b913c90 ("perf maps: Switch from rbtree to lazily sorted array for addresses")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240507141210.195939-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In is_valid_tracepoint, rather than scanning
"/sys/kernel/tracing/events/*/*" skipping any path where
"/sys/kernel/tracing/events/*/*/id" doesn't exist, and then testing if
"*:*" matches the tracepoint name, just use the given tracepoint name
replace the ':' with '/' and see if the id file exists.
This turns a nested directory search into a single file available test.
Rather than return 1 for valid and 0 for invalid, return true and false.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240509153245.1990426-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The btf_features list can be used for pahole v1.26 and later -
it is useful because if a feature is not yet implemented it will
not exit with a failure message. This will allow us to add feature
requests to the pahole options without having to check pahole versions
in future; if the version of pahole supports the feature it will be
added.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240507135514.490467-1-alan.maguire@oracle.com
|
|
check_allowed_ops() is used from both HAVE_DWARF_GETLOCATIONS_SUPPORT
and HAVE_DWARF_CFI_SUPPORT sections, so move it into the right place so
that it's available when either are defined. This shows up when doing
a static cross compile for arm64:
$ make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- LDFLAGS="-static" \
EXTRA_PERFLIBS="-lexpat"
util/dwarf-aux.c:1723:6: error: implicit declaration of function 'check_allowed_ops'
Fixes: 55442cc2f22d0727 ("perf dwarf-aux: Check allowed DWARF Ops")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508141458.439017-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Freeing the thread on failure won't work with reference count checking,
use thread__delete().
Don't allocate the comm_str, use a stack allocation instead.
Fixes: f6005cafebab72f8 ("perf thread: Add reference count checking")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508035301.1554434-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In some cases evsel->name is lazily initialized in evsel__name(). If not
initialized passing NULL to strstr() leads to a SEGV.
Fixes: ccb17caecfbd542f ("perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508035301.1554434-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Searching for the entry in the array needs to avoid the intermediate
pointer with reference count checking.
Refactor the array removal to binary search for the entry.
Change the array to hold an entry with a reference count (so the
intermediate pointer can work) and remove from the array when the
reference count on a comm_str falls to 1.
Fixes: 13ca628716c6f2c3 ("perf comm: Add reference count checking to 'struct comm_str'")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508035301.1554434-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If the title is NULL then it can lead to a SEGV.
Fixes: 769e6a1e15bdbbaf ("perf ui browser: Don't save pointer to stack memory")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240508035301.1554434-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Lockdep reports the below circular locking dependency issue. The
mmap_lock acquisition while holding pci_bus_sem is due to the use of
copy_to_user() from within a pci_walk_bus() callback.
Building the devices array directly into the user buffer is only for
convenience. Instead we can allocate a local buffer for the array,
bounded by the number of devices on the bus/slot, fill the device
information into this local buffer, then copy it into the user buffer
outside the bus walk callback.
======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc5+ #39 Not tainted
------------------------------------------------------
CPU 0/KVM/4113 is trying to acquire lock:
ffff99a609ee18a8 (&vdev->vma_lock){+.+.}-{4:4}, at: vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
but task is already holding lock:
ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (&mm->mmap_lock){++++}-{4:4}:
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
__might_fault+0x5c/0x80
_copy_to_user+0x1e/0x60
vfio_pci_fill_devs+0x9f/0x130 [vfio_pci_core]
vfio_pci_walk_wrapper+0x45/0x60 [vfio_pci_core]
__pci_walk_bus+0x6b/0xb0
vfio_pci_ioctl_get_pci_hot_reset_info+0x10b/0x1d0 [vfio_pci_core]
vfio_pci_core_ioctl+0x1cb/0x400 [vfio_pci_core]
vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (pci_bus_sem){++++}-{4:4}:
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
down_read+0x3e/0x160
pci_bridge_wait_for_secondary_bus.part.0+0x33/0x2d0
pci_reset_bus+0xdd/0x160
vfio_pci_dev_set_hot_reset+0x256/0x270 [vfio_pci_core]
vfio_pci_ioctl_pci_hot_reset_groups+0x1a3/0x280 [vfio_pci_core]
vfio_pci_core_ioctl+0x3b5/0x400 [vfio_pci_core]
vfio_device_fops_unl_ioctl+0x7e/0x140 [vfio]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&vdev->memory_lock){+.+.}-{4:4}:
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
down_write+0x3b/0xc0
vfio_pci_zap_and_down_write_memory_lock+0x1c/0x30 [vfio_pci_core]
vfio_basic_config_write+0x281/0x340 [vfio_pci_core]
vfio_config_do_rw+0x1fa/0x300 [vfio_pci_core]
vfio_pci_config_rw+0x75/0xe50 [vfio_pci_core]
vfio_pci_rw+0xea/0x1a0 [vfio_pci_core]
vfs_write+0xea/0x520
__x64_sys_pwrite64+0x90/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&vdev->vma_lock){+.+.}-{4:4}:
check_prev_add+0xeb/0xcc0
validate_chain+0x465/0x530
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
__mutex_lock+0x97/0xde0
vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
__do_fault+0x31/0x160
do_pte_missing+0x65/0x3b0
__handle_mm_fault+0x303/0x720
handle_mm_fault+0x10f/0x460
fixup_user_fault+0x7f/0x1f0
follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&vdev->vma_lock --> pci_bus_sem --> &mm->mmap_lock
Possible unsafe locking scenario:
block dm-0: the capability attribute has been deprecated.
CPU0 CPU1
---- ----
rlock(&mm->mmap_lock);
lock(pci_bus_sem);
lock(&mm->mmap_lock);
lock(&vdev->vma_lock);
*** DEADLOCK ***
2 locks held by CPU 0/KVM/4113:
#0: ffff99a25f294888 (&iommu->lock#2){+.+.}-{4:4}, at: vfio_dma_do_map+0x60/0x440 [vfio_iommu_type1]
#1: ffff99a243a052a0 (&mm->mmap_lock){++++}-{4:4}, at: vaddr_get_pfns+0x3f/0x170 [vfio_iommu_type1]
stack backtrace:
CPU: 1 PID: 4113 Comm: CPU 0/KVM Not tainted 6.9.0-rc5+ #39
Hardware name: Dell Inc. PowerEdge T640/04WYPY, BIOS 2.15.1 06/16/2022
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xa0
check_noncircular+0x131/0x150
check_prev_add+0xeb/0xcc0
? add_chain_cache+0x10a/0x2f0
? __lock_acquire+0x4e4/0xb90
validate_chain+0x465/0x530
__lock_acquire+0x4e4/0xb90
lock_acquire+0xbc/0x2d0
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
? lock_is_held_type+0x9a/0x110
__mutex_lock+0x97/0xde0
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
? lock_acquire+0xbc/0x2d0
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
? find_held_lock+0x2b/0x80
? vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
vfio_pci_mmap_fault+0x35/0x1a0 [vfio_pci_core]
__do_fault+0x31/0x160
do_pte_missing+0x65/0x3b0
__handle_mm_fault+0x303/0x720
handle_mm_fault+0x10f/0x460
fixup_user_fault+0x7f/0x1f0
follow_fault_pfn+0x66/0x1c0 [vfio_iommu_type1]
vaddr_get_pfns+0xf2/0x170 [vfio_iommu_type1]
vfio_pin_pages_remote+0x348/0x4e0 [vfio_iommu_type1]
vfio_pin_map_dma+0xd2/0x330 [vfio_iommu_type1]
vfio_dma_do_map+0x2c0/0x440 [vfio_iommu_type1]
vfio_iommu_type1_ioctl+0xc5/0x1d0 [vfio_iommu_type1]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x8d/0x170
? rcu_core+0x8d/0x250
? __lock_release+0x5e/0x160
? rcu_core+0x8d/0x250
? lock_release+0x5f/0x120
? sched_clock+0xc/0x30
? sched_clock_cpu+0xb/0x190
? irqtime_account_irq+0x40/0xc0
? __local_bh_enable+0x54/0x60
? __do_softirq+0x315/0x3ca
? lockdep_hardirqs_on_prepare.part.0+0x97/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f8300d0357b
Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 68 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007f82ef3fb948 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8300d0357b
RDX: 00007f82ef3fb990 RSI: 0000000000003b71 RDI: 0000000000000023
RBP: 00007f82ef3fb9c0 R08: 0000000000000000 R09: 0000561b7e0bcac2
R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000200000000 R14: 0000381800000000 R15: 0000000000000000
</TASK>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240503143138.3562116-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Geliang Tang says:
====================
From: Geliang Tang <tanggeliang@kylinos.cn>
This patchset adds post_socket_cb pointer into
struct network_helper_opts to make start_server_addr() helper
more flexible. With these modifications, many duplicate codes
can be dropped.
Patches 1-3 address Martin's comments in the previous series.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
The arguments "addr" and "len" of run_test() have dropped. This makes
function get_port() useless. Drop it from test_tcp_check_syncookie_user.c.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/a9b5c8064ab4cbf0f68886fe0e4706428b8d0d47.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses public helper connect_to_fd() exported in network_helpers.h
instead of the local defined function connect_to_server() in
test_tcp_check_syncookie_user.c. This can avoid duplicate code.
Then the arguments "addr" and "len" of run_test() become useless, drop them
too.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/e0ae6b790ac0abc7193aadfb2660c8c9eb0fe1f0.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
This patch uses public helper connect_to_fd() exported in network_helpers.h
instead of the local defined function connect_to_server() in
prog_tests/sockopt_inherit.c. This can avoid duplicate code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/71db79127cc160b0643fd9a12c70ae019ae076a1.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Include network_helpers.h in test_tcp_check_syncookie_user.c, use
public helper start_server_addr() in it instead of the local defined
function start_server(). This can avoid duplicate code.
Add two helpers v6only_true() and v6only_false() to set IPV6_V6ONLY
sockopt to true or false, set them to post_socket_cb pointer of struct
network_helper_opts, and pass it to start_server_setsockopt().
In order to use functions defined in network_helpers.c, Makefile needs
to be updated too.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/e0c5324f5da84f453f47543536e70f126eaa8678.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Include network_helpers.h in prog_tests/sockopt_inherit.c, use public
helper start_server_addr() instead of the local defined function
start_server(). This can avoid duplicate code.
Add a helper custom_cb() to set SOL_CUSTOM sockopt looply, set it to
post_socket_cb pointer of struct network_helper_opts, and pass it to
start_server_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/687af66f743a0bf15cdba372c5f71fe64863219e.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
__start_server() sets SO_REUSPORT through setsockopt() when the parameter
'reuseport' is set. This patch makes it more flexible by adding a function
pointer post_socket_cb into struct network_helper_opts. The
'const struct post_socket_opts *cb_opts' args in the post_socket_cb is
for the future extension.
The 'reuseport' parameter can be dropped.
Now the original start_reuseport_server() can be implemented by setting a
newly defined reuseport_cb() function pointer to post_socket_cb filed of
struct network_helper_opts.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/470cb82f209f055fc7fb39c66c6b090b5b7ed2b2.1714907662.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Setting this flag on a filesystem results in validity checks being
skipped when writing bkeys. This flag will be used by tooling that
deliberately injects corruption into a filesystem in order to exercise
fsck. It shouldn't be set outside of testing/debugging code.
Signed-off-by: Thomas Bertschinger <tahbertschinger@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This adds distinct counters for every reason the btree node shrinker can
fail to free an object - if our shrinker isn't making progress, this
will tell us why.
Signed-off-by: Daniel Hill <daniel@gluo.nz>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
- bch2_sb_downgrade_validate() wasn't checking for a downgrade entry
extending past the end of the superblock section
- for_each_downgrade_entry() is used in to_text() and needs to work on
malformed input; it also was missing a check for a field extending
past the end of the section
Reported-by: syzbot+e49ccab73449180bc9be@syzkaller.appspotmail.com
Fixes: 84f1638795da ("bcachefs: bch_sb_field_downgrade")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We're about to start using bch_validate_flags for superblock section
validation - it's no longer bkey specific.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
fsync has a slightly odd usage of -EROFS, where it means "does not
support fsync". I didn't choose it...
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
0 (part 2)
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
This is a follow up to commit d8a66f3621c2 ("hwmon: Drop explicit
initialization of struct i2c_device_id::driver_data to 0") which I
created before identifying a few corner cases in my conversion script.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240508072027.2119857-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a simple test for the epoll busy poll ioctls, using the kernel
selftest harness.
This test ensures that the ioctls have the expected return codes and
that the kernel properly gets and sets epoll busy poll parameters.
The test can be expanded in the future to do real busy polling (provided
another machine to act as the client is available).
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://lore.kernel.org/r/20240508184008.48264-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Choices and their members are associated via the P_CHOICE property.
Currently, sym_get_choice_prop() and expr_list_for_each_sym() are
used to iterate on choice members.
Replace them with menu_for_each_sub_entry(), which achieves the same
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
We can do this without relying on P_CHOICE by checking the parent in
the menu structure.
Introduce a new helper to retrieve the choice if the given symbol is a
choice member.
This is intended to replace prop_get_symbol(sym_get_choice_prop()) and
deprecate P_CHOICE eventually.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
menu_finalize() warns default properties for choice members and prompts
outside the choice block. These should be hard errors.
While I was here, I moved the checks to slim down menu_finalize().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Choice members must have a prompt; hence make it an error.
While I was here, I moved the check to the parser to slim down
_menu_finalize().
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The return value of conf_choice() is not used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Following the approach employed in commit bedf92362317 ("kconfig: use
linked list in get_symbol_str() to iterate over menus"), simplify the
iteration on the menus of the specified symbol.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
SYMBOL_CHANGED and MENU_CHANGED are used to update GUI frontends
when the symbol value is changed. These are used inconsistently:
SYMBOL_CHANGED in gconf.c and MENU_CHANGE in qconf.cc.
MENU_CHANGED works more properly when a symbol has multiple prompts
(although such code is not ideal).
[test code]
config FOO
bool "foo prompt 1"
config FOO
bool "foo prompt 2"
In gconfig, if one of the two checkboxes is clicked, only the first
one is toggled. In xconfig, the two checkboxes work in sync.
Replace SYMBOL_CHANGED in gconf.c with MENU_CHANGED to align with
the xconfig behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
