summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-24Merge tag 'for-linus-20180524' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Two fixes that should go into this release: - a loop writeback error clearing fix from Jeff - the sr sense fix from myself" * tag 'for-linus-20180524' of git://git.kernel.dk/linux-block: loop: clear wb_err in bd_inode when detaching backing file sr: pass down correctly sized SCSI sense buffer
2018-05-24Merge tag 'pm-4.17-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a regression from the 4.15 cycle that caused the system suspend and resume overhead to increase on many systems and triggered more serious problems on some of them (Rafael Wysocki)" * tag 'pm-4.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / core: Fix direct_complete handling for devices with no callbacks
2018-05-24Merge tag 'usb-for-v4.18' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: changes for v4.18 merge window A total of 98 non-merge commits, the biggest part being in dwc3 this time around with a large refactoring of dwc3's transfer handling code. We also have a new driver for Aspeed virtual hub controller. Apart from that, just a list of miscellaneous fixes all over the place.
2018-05-24Merge tag 'mlx5-updates-2018-05-17' of ↵Jason Gunthorpe
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux into for-next mlx5-updates-2018-05-17 mlx5 core dirver updates for both net-next and rdma-next branches. From Christophe JAILLET, first three patche to use kvfree where needed. From: Or Gerlitz <ogerlitz@mellanox.com> Next six patches from Roi and Co adds support for merged sriov e-switch which comes to serve cases where both PFs, VFs set on them and both uplinks are to be used in single v-switch SW model. When merged e-switch is supported, the per-port e-switch is logically merged into one e-switch that spans both physical ports and all the VFs. This model allows to offload TC eswitch rules between VFs belonging to different PFs (and hence have different eswitch affinity), it also sets the some of the foundations needed for uplink LAG support. * tag 'mlx5-updates-2018-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: net/mlx5e: Explicitly set source e-switch in offloaded TC rules net/mlx5: Add source e-switch owner net/mlx5e: Explicitly set destination e-switch in FDB rules net/mlx5: Add destination e-switch owner net/mlx5: Properly handle a vport destination when setting FTE net/mlx5: Add merged e-switch cap IB/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()' net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()' net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()'
2018-05-24IB/core: Introduce and use rdma_gid_table()Parav Pandit
There are several places a gid table is accessed. Have a helper tiny function rdma_gid_table() to avoid code duplication at such places. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/core: Reduce the places that use zgidParav Pandit
Instead of open coding memcmp() to check whether a given GID is zero or not, use a helper function to do so, and replace instances of memcpy(z,&zgid) with memset. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/mlx5: Fetch soft WQE's on fatal error stateErez Shitrit
On fatal error the driver simulates CQE's for ULPs that rely on completion of all their posted work-request. For the GSI traffic, the mlx5 has its own mechanism that sends the completions via software CQE's directly to the relevant CQ. This should be kept in fatal error too, so the driver should simulate such CQE's with the specified error state in order to complete GSI QP work requests. Without the fix the next deadlock might appears: schedule_timeout+0x274/0x350 wait_for_common+0xec/0x240 mcast_remove_one+0xd0/0x120 [ib_core] ib_unregister_device+0x12c/0x230 [ib_core] mlx5_ib_remove+0xc4/0x270 [mlx5_ib] mlx5_detach_device+0x184/0x1a0 [mlx5_core] mlx5_unload_one+0x308/0x340 [mlx5_core] mlx5_pci_err_detected+0x74/0xe0 [mlx5_core] Cc: <stable@vger.kernel.org> # 4.7 Fixes: 89ea94a7b6c4 ("IB/mlx5: Reset flow support for IB kernel ULPs") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/ucm: Mark UCM interface as BROKENLeon Romanovsky
In commit 357d23c811a7 ("Remove the obsolete libibcm library") in rdma-core [1], we removed obsolete library which used the /dev/infiniband/ucmX interface. Following multiple syzkaller reports about non-sanitized user input in the UCMA module, the short audit reveals the same issues in UCM module too. It is better to disable this interface in the kernel, before syzkaller team invests time and energy to harden this unused interface. [1] https://github.com/linux-rdma/rdma-core/pull/279 Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/core: Remove duplicate declaration of gid_cache_wqParav Pandit
Remove duplicate declaration of gid_cache_wq. Fixes: d41861942 ("IB/core: Add generic function to extract IB speed from netdev") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/mlx5: Remove debug prints of VMA pointersLeon Romanovsky
Remove various prints of VMA pointers. Reported-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24RDMA/hns: Rename the idx field of dboulijun
The lower 15 bit of paramter of db structure means different meanings when db type is sq, rq and srq. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-24IB/qib: Fix DMA api warning with debug kernelMike Marciniszyn
The following error occurs in a debug build when running MPI PSM: [ 307.415911] WARNING: CPU: 4 PID: 23867 at lib/dma-debug.c:1158 check_unmap+0x4ee/0xa20 [ 307.455661] ib_qib 0000:05:00.0: DMA-API: device driver failed to check map error[device address=0x00000000df82b000] [size=4096 bytes] [mapped as page] [ 307.517494] Modules linked in: [ 307.531584] ib_isert iscsi_target_mod ib_srpt target_core_mod rpcrdma sunrpc ib_srp scsi_transport_srp scsi_tgt ib_iser libiscsi ib_ipoib scsi_transport_iscsi rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_qib intel_powerclamp coretemp rdmavt intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel ipmi_ssif ib_core aesni_intel sg ipmi_si lrw gf128mul dca glue_helper ipmi_devintf iTCO_wdt gpio_ich hpwdt iTCO_vendor_support ablk_helper hpilo acpi_power_meter cryptd ipmi_msghandler ie31200_edac shpchp pcc_cpufreq lpc_ich pcspkr ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci crct10dif_pclmul crct10dif_common drm crc32c_intel libahci tg3 libata serio_raw ptp i2c_core [ 307.846113] pps_core dm_mirror dm_region_hash dm_log dm_mod [ 307.866505] CPU: 4 PID: 23867 Comm: mpitests-IMB-MP Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 307.911178] Hardware name: HP ProLiant DL320e Gen8, BIOS J05 11/09/2013 [ 307.944206] Call Trace: [ 307.956973] [<ffffffffbd9e915b>] dump_stack+0x19/0x1b [ 307.982201] [<ffffffffbd2a2f58>] __warn+0xd8/0x100 [ 308.005999] [<ffffffffbd2a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 308.034260] [<ffffffffbd5f667e>] check_unmap+0x4ee/0xa20 [ 308.060801] [<ffffffffbd41acaa>] ? page_add_file_rmap+0x2a/0x1d0 [ 308.090689] [<ffffffffbd5f6c4d>] debug_dma_unmap_page+0x9d/0xb0 [ 308.120155] [<ffffffffbd4082e0>] ? might_fault+0xa0/0xb0 [ 308.146656] [<ffffffffc07761a5>] qib_tid_free.isra.14+0x215/0x2a0 [ib_qib] [ 308.180739] [<ffffffffc0776bf4>] qib_write+0x894/0x1280 [ib_qib] [ 308.210733] [<ffffffffbd540b00>] ? __inode_security_revalidate+0x70/0x80 [ 308.244837] [<ffffffffbd53c2b7>] ? security_file_permission+0x27/0xb0 [ 308.266025] qib_ib0.8006: multicast join failed for ff12:401b:8006:0000:0000:0000:ffff:ffff, status -22 [ 308.323421] [<ffffffffbd46f5d3>] vfs_write+0xc3/0x1f0 [ 308.347077] [<ffffffffbd492a5c>] ? fget_light+0xfc/0x510 [ 308.372533] [<ffffffffbd47045a>] SyS_write+0x8a/0x100 [ 308.396456] [<ffffffffbd9ff355>] system_call_fastpath+0x1c/0x21 The code calls a qib_map_page() which has never correctly tested for a mapping error. Fix by testing for pci_dma_mapping_error() in all cases and properly handling the failure in the caller. Additionally, streamline qib_map_page() arguments to satisfy just the single caller. Cc: <stable@vger.kernel.org> Reviewed-by: Alex Estrin <alex.estrin@intel.com> Tested-by: Don Dutile <ddutile@redhat.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/isert: Fix for lib/dma_debug check_sync warningAlex Estrin
The following error message occurs on a target host in a debug build during session login: [ 3524.411874] WARNING: CPU: 5 PID: 12063 at lib/dma-debug.c:1207 check_sync+0x4ec/0x5b0 [ 3524.421057] infiniband hfi1_0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000000000000] [size=76 bytes] ......snip ..... [ 3524.535846] CPU: 5 PID: 12063 Comm: iscsi_np Kdump: loaded Not tainted 3.10.0-862.el7.x86_64.debug #1 [ 3524.546764] Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.2.6 06/08/2015 [ 3524.555740] Call Trace: [ 3524.559102] [<ffffffffa5fe915b>] dump_stack+0x19/0x1b [ 3524.565477] [<ffffffffa58a2f58>] __warn+0xd8/0x100 [ 3524.571557] [<ffffffffa58a2fdf>] warn_slowpath_fmt+0x5f/0x80 [ 3524.578610] [<ffffffffa5bf5b8c>] check_sync+0x4ec/0x5b0 [ 3524.585177] [<ffffffffa58efc3f>] ? set_cpus_allowed_ptr+0x5f/0x1c0 [ 3524.592812] [<ffffffffa5bf5cd0>] debug_dma_sync_single_for_cpu+0x80/0x90 [ 3524.601029] [<ffffffffa586add3>] ? x2apic_send_IPI_mask+0x13/0x20 [ 3524.608574] [<ffffffffa585ee1b>] ? native_smp_send_reschedule+0x5b/0x80 [ 3524.616699] [<ffffffffa58e9b76>] ? resched_curr+0xf6/0x140 [ 3524.623567] [<ffffffffc0879af0>] isert_create_send_desc.isra.26+0xe0/0x110 [ib_isert] [ 3524.633060] [<ffffffffc087af95>] isert_put_login_tx+0x55/0x8b0 [ib_isert] [ 3524.641383] [<ffffffffa58ef114>] ? try_to_wake_up+0x1a4/0x430 [ 3524.648561] [<ffffffffc098cfed>] iscsi_target_do_tx_login_io+0xdd/0x230 [iscsi_target_mod] [ 3524.658557] [<ffffffffc098d827>] iscsi_target_do_login+0x1a7/0x600 [iscsi_target_mod] [ 3524.668084] [<ffffffffa59f9bc9>] ? kstrdup+0x49/0x60 [ 3524.674420] [<ffffffffc098e976>] iscsi_target_start_negotiation+0x56/0xc0 [iscsi_target_mod] [ 3524.684656] [<ffffffffc098c2ee>] __iscsi_target_login_thread+0x90e/0x1070 [iscsi_target_mod] [ 3524.694901] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.705446] [<ffffffffc098ca50>] ? __iscsi_target_login_thread+0x1070/0x1070 [iscsi_target_mod] [ 3524.715976] [<ffffffffc098ca78>] iscsi_target_login_thread+0x28/0x60 [iscsi_target_mod] [ 3524.725739] [<ffffffffa58d60ff>] kthread+0xef/0x100 [ 3524.732007] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.739540] [<ffffffffa5fff1b7>] ret_from_fork_nospec_begin+0x21/0x21 [ 3524.747558] [<ffffffffa58d6010>] ? insert_kthread_work+0x80/0x80 [ 3524.755088] ---[ end trace 23f8bf9238bd1ed8 ]--- [ 3595.510822] iSCSI/iqn.1994-05.com.redhat:537fa56299: Unsupported SCSI Opcode 0xa3, sending CHECK_CONDITION. The code calls dma_sync on login_tx_desc->dma_addr prior to initializing it with dma-mapped address. login_tx_desc is a part of iser_conn structure and is used only once during login negotiation, so the issue is fixed by eliminating dma_sync call for this buffer using a special case routine. Cc: <stable@vger.kernel.org> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/{rdmavt,hfi1}: Change hrtimer add to use pinned versionMike Marciniszyn
Given we are dealing with nano-second level timers, when the timer pops, ensure it happens on the CPU which caused the timer to be set in the first place. This avoids excessive jitter from the desired expiration time by avoiding the cost of switching our context to another CPU that is cache cold for this given timer. Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Set port number for errorinfo MAD responseMichael J. Ruhl
For errorinfo MAD requests, the response has a 0 port number left over from a memset. Instead we should always set the port number in the response. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Cleanup of exp_rcvMike Marciniszyn
The knowledge of the internal workings of the expect receive is too distributed. Fix by: - right size several rcd fields associated with expect receive - making an init entrance to init all the lists - consolidate all the allocations into an array anchored in the rcd Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Add 16B Management Packet trace supportDon Hiatt
Add trace support for 16B Management Packets. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Add support for 16B Management PacketsDon Hiatt
16B Management Packets (L4=0x08) replace the BTH and DETH of normal MAD packet packets with a header containing the the source and destination queue pair numbers; fields that were originally retrieved from the BTH/DETH are now populated from this header as well as from the 16B LRH (e.g. pkey). 16B Management Packets are used as an optimized management format on 16B fabrics. These management packets have an opcode of IB_OPCODE_UD_SEND_ONLY, a fixed 3Byte pad, and a header length of 24Bytes. The decision as to when we send a management packet is based upon either the source or destination queue pair number being 0 or 1. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24IB/hfi1: Define 16B Management PacketsDon Hiatt
Add 16B Management Packet definition. This optimized packet format replaces the ib_other_headers and BTH with a source and destination QP number. To support these packets we introduce struct opa_16b_mgmt into the struct hfi1_16b_header. This packet format is only used for MAD packets using the IB_OPCODE_UD_SEND_ONLY opcode on QP0/1. The original 16B implementation failed to use 16B management packets so now we add their definition. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24iw_cxgb4: provide detailed driver-specific MR informationSteve Wise
Add a table of important fields from the fw_ri_tpte structure to the mr resource tracking table. This is helpful in debugging. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24iw_cxgb4: provide detailed driver-specific CQ informationSteve Wise
Add a table of important fields from the c4iw_cq* structures to the cq resource tracking table. This is helpful in debugging. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24iw_cxgb4: provide detailed provider-specific CM_ID informationSteve Wise
Add a table of important fields from the c4iw_ep* structures to the cm_id resource tracking table. This is helpful in debugging. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-24bpf: properly enforce index mask to prevent out-of-bounds speculationDaniel Borkmann
While reviewing the verifier code, I recently noticed that the following two program variants in relation to tail calls can be loaded. Variant 1: # bpftool p d x i 15 0: (15) if r1 == 0x0 goto pc+3 1: (18) r2 = map[id:5] 3: (05) goto pc+2 4: (18) r2 = map[id:6] 6: (b7) r3 = 7 7: (35) if r3 >= 0xa0 goto pc+2 8: (54) (u32) r3 &= (u32) 255 9: (85) call bpf_tail_call#12 10: (b7) r0 = 1 11: (95) exit # bpftool m s i 5 5: prog_array flags 0x0 key 4B value 4B max_entries 4 memlock 4096B # bpftool m s i 6 6: prog_array flags 0x0 key 4B value 4B max_entries 160 memlock 4096B Variant 2: # bpftool p d x i 20 0: (15) if r1 == 0x0 goto pc+3 1: (18) r2 = map[id:8] 3: (05) goto pc+2 4: (18) r2 = map[id:7] 6: (b7) r3 = 7 7: (35) if r3 >= 0x4 goto pc+2 8: (54) (u32) r3 &= (u32) 3 9: (85) call bpf_tail_call#12 10: (b7) r0 = 1 11: (95) exit # bpftool m s i 8 8: prog_array flags 0x0 key 4B value 4B max_entries 160 memlock 4096B # bpftool m s i 7 7: prog_array flags 0x0 key 4B value 4B max_entries 4 memlock 4096B In both cases the index masking inserted by the verifier in order to control out of bounds speculation from a CPU via b2157399cc98 ("bpf: prevent out-of-bounds speculation") seems to be incorrect in what it is enforcing. In the 1st variant, the mask is applied from the map with the significantly larger number of entries where we would allow to a certain degree out of bounds speculation for the smaller map, and in the 2nd variant where the mask is applied from the map with the smaller number of entries, we get buggy behavior since we truncate the index of the larger map. The original intent from commit b2157399cc98 is to reject such occasions where two or more different tail call maps are used in the same tail call helper invocation. However, the check on the BPF_MAP_PTR_POISON is never hit since we never poisoned the saved pointer in the first place! We do this explicitly for map lookups but in case of tail calls we basically used the tail call map in insn_aux_data that was processed in the most recent path which the verifier walked. Thus any prior path that stored a pointer in insn_aux_data at the helper location was always overridden. Fix it by moving the map pointer poison logic into a small helper that covers both BPF helpers with the same logic. After that in fixup_bpf_calls() the poison check is then hit for tail calls and the program rejected. Latter only happens in unprivileged case since this is the *only* occasion where a rewrite needs to happen, and where such rewrite is specific to the map (max_entries, index_mask). In the privileged case the rewrite is generic for the insn->imm / insn->code update so multiple maps from different paths can be handled just fine since all the remaining logic happens in the instruction processing itself. This is similar to the case of map lookups: in case there is a collision of maps in fixup_bpf_calls() we must skip the inlined rewrite since this will turn the generic instruction sequence into a non- generic one. Thus the patch_call_imm will simply update the insn->imm location where the bpf_map_lookup_elem() will later take care of the dispatch. Given we need this 'poison' state as a check, the information of whether a map is an unpriv_array gets lost, so enforcing it prior to that needs an additional state. In general this check is needed since there are some complex and tail call intensive BPF programs out there where LLVM tends to generate such code occasionally. We therefore convert the map_ptr rather into map_state to store all this w/o extra memory overhead, and the bit whether one of the maps involved in the collision was from an unpriv_array thus needs to be retained as well there. Fixes: b2157399cc98 ("bpf: prevent out-of-bounds speculation") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-05-24gpio: pxa: Include the right headerLinus Walleij
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: pl061: Include the right headerLinus Walleij
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: pch: Include the right headerLinus Walleij
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: pcf857x: Include the right headerLinus Walleij
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24gpio: pca953x: Include the right headerLinus Walleij
This is a GPIO driver, include only <linux/gpio/driver.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24drm/amd/display: Remove use of division operator for long longsDavid Francis
In fixed31_32.h, in dc_fixpt_shl,'/' was used for division of one long long int by another long long int. As there is no inbuilt long long int division function in c, gcc inserted its own. However, gcc does not link the library that contains this function. To avoid this, use bitwise operators instead of / Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: David Francis <David.Francis@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: Update GFX info structure to match what vega20 usedShaoyun Liu
Update to the latest version from the vbios team. Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu/pp: remove duplicate assignmentAlex Deucher
is_dpm_running callback was assigned to the same value twice. Drop the duplicate. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/sched: add rcu_barrier after entity finiEmily Deng
To free the fence from the amdgpu_fence_slab, need twice call_rcu, to avoid the amdgpu_fence_slab_fini call kmem_cache_destroy(amdgpu_fence_slab) before kmem_cache_free(amdgpu_fence_slab, fence), add rcu_barrier after drm_sched_entity_fini. The kmem_cache_free(amdgpu_fence_slab, fence)'s call trace as below: 1.drm_sched_entity_fini -> drm_sched_entity_cleanup -> dma_fence_put(entity->last_scheduled) -> drm_sched_fence_release_finished -> drm_sched_fence_release_scheduled -> call_rcu(&fence->finished.rcu, drm_sched_fence_free) 2.drm_sched_fence_free -> dma_fence_put(fence->parent) -> amdgpu_fence_release -> call_rcu(&f->rcu, amdgpu_fence_free) -> kmem_cache_free(amdgpu_fence_slab, fence); v2:put the barrier before the kmem_cache_destroy v3:put the dma_fence_put(fence->parent) before call_rcu in drm_sched_fence_release_scheduled Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: move VM BOs on LRU againChristian König
Move all BOs belonging to a VM on the LRU with every submission. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: consistenly use VM moved flagChristian König
Instead of sometimes checking if the vm_status is empty use the moved flag and also reset it when the BO leaves the state machine. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: kmap PDs/PTs in amdgpu_vm_update_directoriesChristian König
In theory it is possible that PDs/PTs can move without eviction. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: further optimize amdgpu_vm_handle_movedChristian König
Splice the moved list to a local one to avoid taking the lock over and over again. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: cleanup amdgpu_vm_validate_pt_bos v2Christian König
Use list_for_each_entry_safe here. v2: Drop the optimization, it doesn't work as expected. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: rework VM state machine lock handling v2Christian König
Only the moved state needs a separate spin lock protection. All other states are protected by reserving the VM anyway. v2: fix some more incorrect cases Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: Add runtime VCN PG supportRex Zhu
Enable support for dynamically powering up/down VCN on demand. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: Enable VCN static PG by default on RVRex Zhu
Enable static VCN powergating by default on Raven. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: Add VCN static PG support on RVRex Zhu
Implement static powergating suport on VCN. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: Enable VCN CG by default on RVRex Zhu
Enable VCN clockgating by default on Raven. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24drm/amdgpu: Add static CG control for VCN on RVRex Zhu
Implement proper static clockgating support for VCN. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-24Merge tag 'batadv-next-for-davem-20180524' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Disable batman-adv debugfs by default, by Sven Eckelmann - Improve handling mesh nodes with multicast optimizations disabled, by Linus Luessing - Avoid bool in structs, by Sven Eckelmann - Allocate less memory when debugfs is disabled, by Sven Eckelmann - Fix batadv_interface_tx return data type, by Luc Van Oostenryck - improve link speed handling for virtual interfaces, by Marek Lindner - Enable BATMAN V algorithm by default, by Marek Lindner ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24x86/kvm: fix LAPIC timer drift when guest uses periodic modeDavid Vrabel
Since 4.10, commit 8003c9ae204e (KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support), guests using periodic LAPIC timers (such as FreeBSD 8.4) would see their timers drift significantly over time. Differences in the underlying clocks and numerical errors means the periods of the two timers (hv and sw) are not the same. This difference will accumulate with every expiry resulting in a large error between the hv and sw timer. This means the sw timer may be running slow when compared to the hv timer. When the timer is switched from hv to sw, the now active sw timer will expire late. The guest VCPU is reentered and it switches to using the hv timer. This timer catches up, injecting multiple IRQs into the guest (of which the guest only sees one as it does not get to run until the hv timer has caught up) and thus the guest's timer rate is low (and becomes increasing slower over time as the sw timer lags further and further behind). I believe a similar problem would occur if the hv timer is the slower one, but I have not observed this. Fix this by synchronizing the deadlines for both timers to the same time source on every tick. This prevents the errors from accumulating. Fixes: 8003c9ae204e21204e49816c5ea629357e283b06 Cc: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: David Vrabel <david.vrabel@nutanix.com> Cc: stable@vger.kernel.org Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2018-05-24Merge tag 'kvm-ppc-fixes-4.17-1' of ↵Radim Krčmář
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc Fixes for PPC KVM: - Close a hole which could possibly lead to the host timebase getting out of sync. - Three fixes relating to PTEs and TLB entries for radix guests. - Fix a bug which could lead to an interrupt never getting delivered to the guest, if it is pending for a guest vCPU when the vCPU gets offlined.
2018-05-24spi: sh-msiof: Fix setting SIRMDR1.SYNCAC to match SITMDR1.SYNCACGeert Uytterhoeven
According to section 59.2.4 MSIOF Receive Mode Register 1 (SIRMDR1) in the R-Car Gen3 datasheet Rev.1.00, the value of the SIRMDR1.SYNCAC bit must match the value of the SITMDR1.SYNCAC bit. However, sh_msiof_spi_setup() changes only the latter. Fix this by updating the SIRMDR1 register like the SITMDR1 register, taking into account register bits that exist in SITMDR1 only. Reported-by: Renesas BSP team via Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: 7ff0b53c4051145d ("spi: sh-msiof: Avoid writing to registers from spi_master.setup()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-05-25powerpc/xmon: Also setup debugger hooks when single-steppingMichal Suchanek
When single-stepping kernel code from xmon without a debug hook enabled the kernel crashes. This can happen when kernel starts with xmon on crash disabled but xmon is entered using sysrq. Call force_enable_xmon when single-stepping in xmon to install the xmon debug hooks. Fixes: e1368d0c9edb ("powerpc/xmon: Setup debugger hooks when first break-point is set") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25powerpc/8xx: fix invalid register expression in head_8xx.SChristophe Leroy
New binutils generate the following warning AS arch/powerpc/kernel/head_8xx.o arch/powerpc/kernel/head_8xx.S: Assembler messages: arch/powerpc/kernel/head_8xx.S:916: Warning: invalid register expression This patch fixes it. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-25selftests/powerpc: Add ptrace hw breakpoint testMichael Neuling
This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and PPC_PTRACE_SETHWDEBUG. This test was use to find the bugs fixed by these recent commits: 4f7c06e26e powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG cd6ef7eebf powerpc/ptrace: Fix enforcement of DAWR constraints Signed-off-by: Michael Neuling <mikey@neuling.org> [mpe: Add SPDX tag, clang format it] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit (git 2.34.1) at 2025-09-26 14:02:40 +0000