summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-23brcmfmac: add debugfs entry for reading firmware capabilitiesRafał Miłecki
This allows reading all capabilities as reported by a firmware. They are printed using native (raw) names, just like developers like it the most. It's how firmware reports support for various features, e.g. supported modes, supported standards, power saving details, max BSS-es. Access to all that info is useful for trying new firmwares, comparing them and debugging features AKA bugs. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mwifiex: correct histogram data with appropriate indexXinming Hu
Correct snr/nr/rssi data index to avoid possible buffer underflow. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: use udelay instead of usleep_range in mt76x2_mac_stopFelix Fietkau
usleep_range can cause excessive latency on channel change if waiting for the MAC to stop fails. It will be forced to stop by the code following that loop anyway. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: wait for pending tx to complete before switching channelFelix Fietkau
Reduces interruption caused by scanning Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: move ieee80211_hw allocation to common coreFelix Fietkau
Allows it to be shared between different drivers and locks to be initialized earlier Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: prevent tx scheduling during channel changeFelix Fietkau
Re-schedule tx afterwards Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: only stop tx queues on offchannel, not during the entire scanFelix Fietkau
During scans, mac80211 frequently switches back to the home channel to minimize interruption of ongoing traffic. Keep regular tx queues active during that time. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23gpio: zynq: simplifly getting drvdataShubhrajyoti Datta
Get the driver data directly by dev_get_drvdata. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23mt76: discard early received packets if not running yetFelix Fietkau
If the radio was previously in running state, it can receive some packets before it is able to process them. This can lead to a crash if the channel is not initialized yet. Discard all rx packets until start() is called Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76: fix sending encrypted broadcast packets for secondary interfacesFelix Fietkau
For encryption to work properly, the BSS index needs to be initialized for the WCID entry used for the interface. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23mt76x2: apply coverage class on slot time tooLorenzo Bianconi
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. Taking into account coverage class in slot time configuration allows to increase by an order of magnitude the throughput on a 4Km link in a noisy environment Tested-by: Luca Bisti <luca.bisti@gmail.com> Tested-by: Gaetano Catalli <gaetano.catalli@gmail.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-23gpio: zynq: Remove call to platform_get_irqShubhrajyoti Datta
Remove the call to platform_get_irq use the cached one instead. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23netfilter: nft_limit: fix packet ratelimitingPablo Neira Ayuso
Credit calculations for the packet ratelimiting are not correct, as per the applied ratelimit of 25/second and burst 8, a total of 33 packets should have been accepted. This is true in iptables(33) but not in nftables (~65). For packet ratelimiting, use: div_u64(limit->nsecs, limit->rate) * limit->burst; to calculate credit, just like in iptables' xt_limit does. Moreover, use default burst in iptables, users are expecting similar behaviour. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.18. Major changes: ath10k * add quiet mode support for QCA6174/QCA9377 wil6210 * disable WIL6210_TRACING kconfig option by default
2018-05-23netfilter: nft_meta: fix wrong value dereference in nft_meta_set_evalTaehee Yoo
In the nft_meta_set_eval, nftrace value is dereferenced as u32 from sreg. But correct type is u8. so that sometimes incorrect value is dereferenced. Steps to reproduce: %nft add table ip filter %nft add chain ip filter input { type filter hook input priority 4\; } %nft add rule ip filter input nftrace set 0 %nft monitor Sometimes, we can see trace messages. trace id 16767227 ip filter input packet: iif "enp2s0" ether saddr xx:xx:xx:xx:xx:xx ether daddr xx:xx:xx:xx:xx:xx ip saddr 192.168.0.1 ip daddr 255.255.255.255 ip dscp cs0 ip ecn not-ect ip trace id 16767227 ip filter input rule nftrace set 0 (verdict continue) trace id 16767227 ip filter input verdict continue trace id 16767227 ip filter input Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nfnetlink_queue: resolve clash for unconfirmed conntracksPablo Neira Ayuso
In nfqueue, two consecutive skbuffs may race to create the conntrack entry. Hence, the one that loses the race gets dropped due to clash in the insertion into the hashes from the nf_conntrack_confirm() path. This patch adds a new nf_conntrack_update() function which searches for possible clashes and resolve them. NAT mangling for the packet losing race is corrected by using the conntrack information that won race. In order to avoid direct module dependencies with conntrack and NAT, the nf_ct_hook and nf_nat_hook structures are used for this purpose. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: add struct nf_nat_hook and use itPablo Neira Ayuso
Move decode_session() and parse_nat_setup_hook() indirections to struct nf_nat_hook structure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: add struct nf_ct_hook and use itPablo Neira Ayuso
Move the nf_ct_destroy indirection to the struct nf_ct_hook. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: ip6t_rpfilter: provide input interface for route lookupVincent Bernat
In commit 47b7e7f82802, this bit was removed at the same time the RT6_LOOKUP_F_IFACE flag was removed. However, it is needed when link-local addresses are used, which is a very common case: when packets are routed, neighbor solicitations are done using link-local addresses. For example, the following neighbor solicitation is not matched by "-m rpfilter": IP6 fe80::5254:33ff:fe00:1 > ff02::1:ff00:3: ICMP6, neighbor solicitation, who has 2001:db8::5254:33ff:fe00:3, length 32 Commit 47b7e7f82802 doesn't quite explain why we shouldn't use RT6_LOOKUP_F_IFACE in the rpfilter case. I suppose the interface check later in the function would make it redundant. However, the remaining of the routing code is using RT6_LOOKUP_F_IFACE when there is no source address (which matches rpfilter's case with a non-unicast destination, like with neighbor solicitation). Signed-off-by: Vincent Bernat <vincent@bernat.im> Fixes: 47b7e7f82802 ("netfilter: don't set F_IFACE on ipv6 fib lookups") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nft_set_rbtree: add timeout supportPablo Neira Ayuso
Add garbage collection logic to expire elements stored in the rb-tree representation. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: make NF_OSF non-visible symbolFernando Fernandez Mancera
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: lift one-nat-hook-only restrictionFlorian Westphal
This reverts commit f92b40a8b2645 ("netfilter: core: only allow one nat hook per hook point"), this limitation is no longer needed. The nat core now invokes these functions and makes sure that hook evaluation stops after a mapping is created and a null binding is created otherwise. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nf_nat: add nat type hooks to nat coreFlorian Westphal
Currently the packet rewrite and instantiation of nat NULL bindings happens from the protocol specific nat backend. Invocation occurs either via ip(6)table_nat or the nf_tables nat chain type. Invocation looks like this (simplified): NF_HOOK() | `---iptable_nat | `---> nf_nat_l3proto_ipv4 -> nf_nat_packet | new packet? pass skb though iptables nat chain | `---> iptable_nat: ipt_do_table In nft case, this looks the same (nft_chain_nat_ipv4 instead of iptable_nat). This is a problem for two reasons: 1. Can't use iptables nat and nf_tables nat at the same time, as the first user adds a nat binding (nf_nat_l3proto_ipv4 adds a NULL binding if do_table() did not find a matching nat rule so we can detect post-nat tuple collisions). 2. If you use e.g. nft_masq, snat, redir, etc. uses must also register an empty base chain so that the nat core gets called fro NF_HOOK() to do the reverse translation, which is neither obvious nor user friendly. After this change, the base hook gets registered not from iptable_nat or nftables nat hooks, but from the l3 nat core. iptables/nft nat base hooks get registered with the nat core instead: NF_HOOK() | `---> nf_nat_l3proto_ipv4 -> nf_nat_packet | new packet? pass skb through iptables/nftables nat chains | +-> iptables_nat: ipt_do_table +-> nft nat chain x `-> nft nat chain y The nat core deals with null bindings and reverse translation. When no mapping exists, it calls the registered nat lookup hooks until one creates a new mapping. If both iptables and nftables nat hooks exist, the first matching one is used (i.e., higher priority wins). Also, nft users do not need to create empty nat hooks anymore, nat core always registers the base hooks that take care of reverse/reply translation. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nf_nat: add nat hook register functions to nf_natFlorian Westphal
This adds the infrastructure to register nat hooks with the nat core instead of the netfilter core. nat hooks are used to configure nat bindings. Such hooks are registered from ip(6)table_nat or by the nftables core when a nat chain is added. After next patch, nat hooks will be registered with nf_nat instead of netfilter core. This allows to use many nat lookup functions at the same time while doing the real packet rewrite (nat transformation) in one place. This change doesn't convert the intended users yet to ease review. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: core: export raw versions of add/delete hook functionsFlorian Westphal
This will allow the nat core to reuse the nf_hook infrastructure to maintain nat lookup functions. The raw versions don't assume a particular hook location, the functions get added/deleted from the hook blob that is passed to the functions. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nf_tables: allow chain type to override hook registerFlorian Westphal
Will be used in followup patch when nat types no longer use nf_register_net_hook() but will instead register with the nat core. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: xtables: allow table definitions not backed by hook_opsFlorian Westphal
The ip(6)tables nat table is currently receiving skbs from the netfilter core, after a followup patch skbs will be coming from the netfilter nat core instead, so the table is no longer backed by normal hook_ops. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23netfilter: nf_nat: move common nat code to nat coreFlorian Westphal
Copy-pasted, both l3 helpers almost use same code here. Split out the common part into an 'inet' helper. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-05-23s390/cio: add test for ccwgroup deviceSebastian Ott
Add a test to check if a given device is a ccwgroup device. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390/cio: add helper to query utility strings per given ccw deviceSebastian Ott
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390: remove no-op macro VMLINUX_SYMBOL()Masahiro Yamada
VMLINUX_SYMBOL() is no-op unless CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX is defined. It has ever been selected only by BLACKFIN and METAG. VMLINUX_SYMBOL() is unneeded for s390-specific code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23s390/dasd: use blk_mq_rq_from_pdu for per request dataSebastian Ott
Dasd uses completion_data from struct request to store per request private data - this is problematic since this member is part of a union which is also used by IO schedulers. Let the block layer maintain space for per request data behind each struct request. Fixes crashes on block layer timeouts like this one: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000483 Fault in home space mode while using kernel ASCE. AS:0000000001308007 R3:00000000fffc8007 S:00000000fffcc000 P:000000000000013d Oops: 0004 ilc:2 [#1] PREEMPT SMP Modules linked in: [...] CPU: 0 PID: 1480 Comm: kworker/0:2H Not tainted 4.17.0-rc4-00046-gaa3bcd43b5af #203 Hardware name: IBM 3906 M02 702 (LPAR) Workqueue: kblockd blk_mq_timeout_work Krnl PSW : 0000000067ac406b 00000000b6960308 (do_raw_spin_trylock+0x30/0x78) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000c00 0000000000000000 0000000000000000 0000000000000001 0000000000b9d3c8 0000000000000000 0000000000000001 00000000cf9639d8 0000000000000000 0700000000000000 0000000000000000 000000000099f09e 0000000000000000 000000000076e9d0 000000006247bb08 000000006247bae0 Krnl Code: 00000000001c159c: b90400c2 lgr %r12,%r2 00000000001c15a0: a7180000 lhi %r1,0 #00000000001c15a4: 583003a4 l %r3,932 >00000000001c15a8: ba132000 cs %r1,%r3,0(%r2) 00000000001c15ac: a7180001 lhi %r1,1 00000000001c15b0: a784000b brc 8,1c15c6 00000000001c15b4: c0e5004e72aa brasl %r14,b8fb08 00000000001c15ba: 1812 lr %r1,%r2 Call Trace: ([<0700000000000000>] 0x700000000000000) [<0000000000b9d3d2>] _raw_spin_lock_irqsave+0x7a/0xb8 [<000000000099f09e>] dasd_times_out+0x46/0x278 [<000000000076ea6e>] blk_mq_terminate_expired+0x9e/0x108 [<000000000077497a>] bt_for_each+0x102/0x130 [<0000000000774e54>] blk_mq_queue_tag_busy_iter+0x74/0xd8 [<000000000076fea0>] blk_mq_timeout_work+0x260/0x320 [<0000000000169dd4>] process_one_work+0x3bc/0x708 [<000000000016a382>] worker_thread+0x262/0x408 [<00000000001723a8>] kthread+0x160/0x178 [<0000000000b9e73a>] kernel_thread_starter+0x6/0xc [<0000000000b9e734>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000000000b9d3cc>] _raw_spin_lock_irqsave+0x74/0xb8 Kernel panic - not syncing: Fatal exception: panic_on_oops Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-05-23mfd: cros_ec: Retry commands when EC is known to be busyBrian Norris
Commit 001dde9400d5 ("mfd: cros ec: spi: Fix "in progress" error signaling") pointed out some bad code, but its analysis and conclusion was not 100% correct. It *is* correct that we should not propagate result==EC_RES_IN_PROGRESS for transport errors, because this has a special meaning -- that we should follow up with EC_CMD_GET_COMMS_STATUS until the EC is no longer busy. This is definitely the wrong thing for many commands, because among other problems, EC_CMD_GET_COMMS_STATUS doesn't actually retrieve any RX data from the EC, so commands that expected some data back will instead start processing junk. For such commands, the right answer is to either propagate the error (and return that error to the caller) or resend the original command (*not* EC_CMD_GET_COMMS_STATUS). Unfortunately, commit 001dde9400d5 forgets a crucial point: that for some long-running operations, the EC physically cannot respond to commands any more. For example, with EC_CMD_FLASH_ERASE, the EC may be re-flashing its own code regions, so it can't respond to SPI interrupts. Instead, the EC prepares us ahead of time for being busy for a "long" time, and fills its hardware buffer with EC_SPI_PAST_END. Thus, we expect to see several "transport" errors (or, messages filled with EC_SPI_PAST_END). So we should really translate that to a retryable error (-EAGAIN) and continue sending EC_CMD_GET_COMMS_STATUS until we get a ready status. IOW, it is actually important to treat some of these "junk" values as retryable errors. Together with commit 001dde9400d5, this resolves bugs like the following: 1. EC_CMD_FLASH_ERASE now works again (with commit 001dde9400d5, we would abort the first time we saw EC_SPI_PAST_END) 2. Before commit 001dde9400d5, transport errors (e.g., EC_SPI_RX_BAD_DATA) seen in other commands (e.g., EC_CMD_RTC_GET_VALUE) used to yield junk data in the RX buffer; they will now yield -EAGAIN return values, and tools like 'hwclock' will simply fail instead of retrieving and re-programming undefined time values Fixes: 001dde9400d5 ("mfd: cros ec: spi: Fix "in progress" error signaling") Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-05-23clocksource/drivers/mxs_timer: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-tpm: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-gpt: Switch to SPDX identifierFabio Estevam
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23clocksource/drivers/timer-imx-gpt: Remove outdated file pathFabio Estevam
imx gpt timer driver has been moved from arch/arm/mach-imx to drivers/clocksource/ a long time ago, so remove the reference to the old file path. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-23nds32: Fix compiler warning, Wstringop-overflow, in vdso.cVincent Chen
Getting a compiler warning, Wstringop-overflow, in arch/nds32/kernel/vdso.c when kernel is built by gcc-8. Declaring vdso_start and vdso_end as a pointer to fix this compiler warning. Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Disable local irq before calling cpu_dcache_wb_page in copy_user_highpageVincent Chen
In order to ensure that all data in source page has been written back to memory before copy_page, the local irq shall be disabled before calling cpu_dcache_wb_page(). In addition, removing unneeded page invalidation for 'to' page. Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Flush the cache of the page at vmaddr instead of kaddr in flush_anon_pageVincent Chen
According to Documentation/cachetlb.txt, the cache of the page at vmaddr shall be flushed in flush_anon_page instead of the cache of the page at page_address(page). Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Correct flush_dcache_page functionVincent Chen
1. Disable local irq before d-cache write-back and invalidate. The cpu_dcache_wbinval_page function is composed of d-cache write-back and invalidate. If the local irq is enabled when calling cpu_dcache_wbinval_page, the content of d-cache is possibly updated between write-back and invalidate. In this case, the updated data will be dropped due to the following d-cache invalidation. Therefore, we disable the local irq before calling cpu_dcache_wbinval_page. 2. Correct the data write-back for page aliasing case. Only the page whose (page->index << PAGE_SHIFT) is located at the same page color as page_address(page) needs to execute data write-back in flush_dcache_page function. Signed-off-by: Vincent Chen <vincentc@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Fix the unaligned access handlerNickhu
If the kernel config 'CONFIG_ALIGNMENT_TRAP' and the file '/proc/sys/nds32/unaligned_access/enable' are set, the kernel unaligned access handler does not handle correctly when the value of immediate field is negative. This commit fixes the unaligned access handler in kernel. Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Renaming the file for unaligned accessNickhu
Change the name of the file '/proc/sys/nds32/unaligned_acess' to '/proc/sys/nds32/unaligned_access' Signed-off-by: Nickhu <nickhu@andestech.com> Reviewed-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: To fix a cache inconsistency issue by setting correct cacheability of NTCGreentime Hu
The nds32 architecture will use physical memory when interrupt or exception comes and it will use the setting of NTC0-4. The original implementation didn't consider the DRAM start address may start from 1GB, 2GB or 3GB to cause this issue. It will write the data to DRAM if it is running in physical address however kernel will read the data with virtaul address through data cache. In this case, the data of DRAM is latest. This fix will set the correct cacheability to let kernel write/read the latest data in cache instead of DRAM. Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: To refine readability of INT_MASK_INITAIAL_VALGreentime Hu
Refine readability of INT_MASK_INITAIAL_VAL with meaningful macro instead of magic number. Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Fix the virtual address may map too much range by tlbop issue.Greentime Hu
We use tlbop to map virtual address in the first beginning, however it may map too much if DRAM size is not that big. We have to invalidate the mapping when the page table is created. Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Fix the allmodconfig build. To make sure CONFIG_CPU_LITTLE_ENDIAN is ↵Greentime Hu
default y This way we can build kernel with CONFIG_CPU_LITTLE_ENDIAN=y. Build allmodconfig and allnoconfig are available too. It also fixes the endian mismatch issue because AFLAGS and LDFLAGS is not passed correctly. Signed-off-by: Vincent Ren-Wei Chen <vincentc@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
2018-05-23nds32: Fix build failed because arch_trace_hardirqs_off is changed to ↵Greentime Hu
trace_hardirqs_off. It broke the 'allmodconfig' build when CONFIG_TRACE_IRQFLAGS is enabled. Signed-off-by: Nick Chun-Ming Hu <nickhu@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23nds32: Fix the unknown type u8 issue.Greentime Hu
It broke the 'allmodconfig' build. We need to include <linux/types.h> to make sure the type is defined before using it. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2018-05-23nds32: Fix the symbols undefined issue by exporting them.Greentime Hu
It broke the 'allmodconfig' build. LD vmlinux SYSMAP System.map Building modules, stage 2. MODPOST 5028 modules ERROR: "flush_dcache_page" [net/sunrpc/xprtrdma/rpcrdma.ko] undefined! ERROR: "empty_zero_page" [net/ceph/libceph.ko] undefined! ERROR: "save_stack_trace" [kernel/backtracetest.ko] undefined! ERROR: "clear_page" [fs/ocfs2/dlm/ocfs2_dlm.ko] undefined! ERROR: "copy_page" [fs/nilfs2/nilfs2.ko] undefined! ... Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit (git 2.34.1) at 2025-09-28 17:30:02 +0000