| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds support to 4 MI2S ports on LPASS.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to 6 SLIMBus AFE ports, which are used as
backend dais.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch adds support to Q6AFE (Audio Front End) module on Q6DSP.
AFE module sits right at the other end of cpu where the codec/audio
devices are connected.
AFE provides abstraced interfaces to both hardware and virtual devices.
Each AFE tx/rx port can be configured to connect to one of the hardware
devices like codec, hdmi, slimbus, i2s and so on. AFE services include
starting, stopping, and if needed, any configurations of the ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
|
|
Use sg_copy_{from,to}_buffer to bounce buffer and kmap_atomic to map the
scatterlist entry before using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Pass the scatterlist on to the USB subsystem instead of expecting a
kernel virtual address.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Use kmap_atomic to map the scatterlist entry before using it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This handles highmem pages, and also cleans up the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This handles highmem pages, and also cleans up the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
It's pointless to switch and trace partition type if the current
selected device partition is the same with that one. Moreover, cycled
claiming host associated with mmc_blk_part_switch() could make
mmc_blk_remove() end up waiting for grabbing the context if it's
occupied, which lead requests could still hit the low-level drivers,
if an asynchronous unbind for host drivers happened, as the card hasn't
been set removed in the remove path.
So a simple dd in background:
dd if=/dev/mmcblk0 of=/dev/null bs=512k count=100000 &
and doing unbind then:
echo fe320000.dwmmc > /sys/bus/platform/drivers/dwmmc_rockchip/unbind
could make the console stuck for quite a while depending on the
numbers of requests.
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Implement irq_chip based solution for IRQs management in order to
comply with IRQ framework.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Currently tegra20-cpufreq kernel module isn't getting autoloaded because
there is no device associated with the module, this is one of two patches
that resolves the module autoloading. This patch adds a module alias that
will associate the tegra20-cpufreq kernel module with the platform device,
other patch will instantiate the actual platform device. And now it makes
sense to wrap cpufreq driver into a platform driver for consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Nothing prevents Tegra20 CPUFreq module to be unloaded, hence allow it to
be built as a non-builtin kernel module.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Don't even try to request the clocks during of module initialization on
non-Tegra20 machines (this is the case for a multi-platform kernel) for
consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove unneeded variable initialization solely for consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove unnecessary parentheses as suggested by the checkpatch script.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove checking of the CPU number for consistency as it won't ever fail
unless there is a severe bug in the cpufreq core.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Properly put requested clocks in the module init/exit code.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The EMC driver has been gone 4 years ago, since the commit a7cbe92cef27
("ARM: tegra: remove tegra EMC scaling driver"). Remove the EMC clock
usage as it does nothing. We may consider re-implementing the EMC scaling
later, probably using PM Memory Bandwidth QoS API.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove unused/unneeded headers and sort them in the alphabet order.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove unneeded blank line and replace whitespaces with a tab in the code
for consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Change module description to be in line with the other Tegra drivers, just
for consistency.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The SDHCI_QUIRK2_HOST_OFF_CARD_ON is needed for the driver to
properly reset the host controller (reset all) on initialization
after exiting deep sleep.
Signed-off-by: Corneliu Doban <corneliu.doban@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
Fixes: c833e92bbb60 ("mmc: sdhci-iproc: support standard byte register accesses")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
When the host controller accepts only 32bit writes, the value of the
16bit TRANSFER_MODE register, that has the same 32bit address as the
16bit COMMAND register, needs to be saved and it will be written
in a 32bit write together with the command as this will trigger the
host to send the command on the SD interface.
When sending the tuning command, TRANSFER_MODE is written and then
sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and
write it again resulting in wrong value to be written because the
initial write value was saved in a shadow and the read-back returned
a wrong value, from the register.
Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE
when a saved value exist.
Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are
saved for a different reason, although a scenario that will cause the
mentioned problem on this registers is not probable.
Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver")
Signed-off-by: Corneliu Doban <corneliu.doban@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org # v4.1+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Remove hard coded mmc cap 1.8v from platform data as it is board specific.
The 1.8v DDR mmc caps can be enabled using DTS property for those
boards that support it.
Fixes: b17b4ab8ce38 ("mmc: sdhci-iproc: define MMC caps in platform data")
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Log the correct error code in case the .open() call to a component fails.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Currently the 'big-endian' property is listed as required, which is
not correct. i.MX SoCs do not need such property, so move it under
'Optional properties' entry instead.
Also, fsl-sai.txt incorrectly referenced 'FTM_PWM registers', so
change it to 'SAI registers', which is the intended description.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Trivial fix to spelling mistake in snprintf literal string
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ARM machines all have DMI tables so if they request hw error reporting
through GHES, then the driver should be able to detect DIMMs and report
errors successfully (famous last words :)).
Make the platform-based list x86-specific so that ghes_edac can load on
ARM.
Reported-by: Qiang Zheng <zhengqiang10@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Qiang Zheng <zhengqiang10@huawei.com>
Link: https://lkml.kernel.org/r/1526039543-180996-1-git-send-email-zhengqiang10@huawei.com
|
|
TC Electronic Digital Konnekt x32 is an application of WaveFront DiceII STD
and doesn't support TCAT extended application protocol. For such devices,
ALSA dice driver needs to have hard-coded parameters for stream formats.
This commit adds stream format parameters for this model. Unfortunately, at
sampling transmission frequencies of 88.2/96.0kHz, I confirmed that current
ALSA dice driver doesn't drive the device appropriately due to detecting
packet discontinuities.
$ journalctl
kernel: snd_dice fw1.0: Detect discontinuity of CIP: 90 80
At the frequencies, the device transfers 16 data blocks per packet and 16
data channels per data block, as a result one packet includes 1032 bytes
if it's not NODATA. However, as long as I checked, the device often
postpone packet transmission and continue with truncated payload than
metadata in isochronous packet header. Below is a sample of sequence I got.
sec cycle bytes CIP1 CIP2
37 3314 1032 0x01100090 0x900449E2
37 3315 8 0x011000A0 0x9004FFFF
37 3316 1032 0x011000A0 0x900461E2
37 3317 1032 0x011000B0 0x900475E2
37 3318 1032 0x011000C0 0x900489E2
37 3319 8 0x011000D0 0x9004FFFF
37 3320 1032 0x011000D0 0x9004A1E2
37 3321 1032 0x011000E0 0x9004B5E2
37 3322 1032 0x011000F0 0x9004C9E2
37 3323 8 0x01100000 0x9004FFFF
37 3324 1032 0x01100000 0x9004E1E2
37 3325 1032 0x01100010 0x9004F5E2
37 3326 1032 0x01100020 0x900409E2
37 3327 8 0x01100030 0x9004FFFF
37 3328 1032 0x01100030 0x900421E2
37 3329 1032 0x01100040 0x900435E2
37 3330 (skip)
37 3331 (skip)
37 3332 (skip)
37 3333 (skip)
37 3334 (skip)
37 3335 (skip)
37 3336 (skip)
37 3337 (skip)
37 3338 (skip)
37 3339 (skip)
37 3340 (skip)
37 3341 (skip)
37 3342 (skip)
37 3343 (skip)
37 3344 (skip)
37 3345 (skip)
37 3346 (skip)
37 3347 (skip)
37 3348 (skip)
37 3349 (skip)
37 3350 (skip)
37 3351 (skip)
37 3352 (skip)
37 3353 (skip)
37 3354 (skip)
37 3355 (skip)
37 3356 (skip)
37 3357 (skip)
37 3358 (skip)
37 3359 (skip)
37 3360 (skip)
37 3361 (skip)
37 3362 (skip)
37 3363 (skip)
37 3364 (skip)
37 3365 (skip)
37 3366 (skip)
37 3367 1032 0x01100050 0x900461E1
37 3368 1032 0x01100060 0x900475E1
37 3369 1032 0x01100070 0x9004A1E1
37 3370 1032 0x01100080 0x9004A1E1 but content of payload is truncated.
37 3371 (skip)
37 3371 1032 0x01100080 0x9004B5E0 detect discontinuity
37 3372 1032 0x01100090 0x9004C9E0
37 3373 1032 0x011000A0 0x9004E1E0
37 3374 1032 0x011000B0 0x9004F5E0
37 3375 1032 0x011000C0 0x900409E0
37 3376 1032 0x011000D0 0x900421E0
37 3377 1032 0x011000E0 0x900435E0
37 3378 1032 0x011000F0 0x900449DF
37 3379 8 0x01100000 0x9004FFFF
37 3380 1032 0x01100000 0x900461DF
37 3381 1032 0x01100010 0x900475DF
37 3382 1032 0x01100020 0x900489DF
37 3383 8 0x01100030 0x9004FFFF
37 3384 1032 0x01100030 0x9004A1DF
37 3385 1032 0x01100040 0x9004B5DF
37 3386 1032 0x01100050 0x9004C9DF
37 3387 8 0x01100060 0x9004FFFF
I cannot confirm this quirks with Windows driver. ALSA dice driver has a
cause if assumed differences between these two drivers are ways of
timestampling to RX packets from the drivers to the device. I've already
reported timestamping quirk of Dice-based devices and this might bring
this issue.
[alsa-devel] Dice packet sequence quirk and ALSA firewire stack in Linux 4.6
http://mailman.alsa-project.org/pipermail/alsa-devel/2016-May/107715.html
Well, nevertheless, I enable ALSA dice driver to work at the frequencies.
This may brings inconvenience to users but I expect developers and users
to fix it.
$ cd linux-firewire-utils/src
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 040423bb bus_info_length 4, crc_length 4, crc 9147
404 31333934 bus_name "1394"
408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c 00016604 company_id 000166 |
410 0c232c28 device_id 040c232c28 | EUI-64 000166040c232c28
root directory
-----------------------------------------------------------------
414 0006b6cb directory_length 6, crc 46795
418 03000166 vendor
41c 8100000a --> descriptor leaf at 444
420 17000030 model
424 8100000f --> descriptor leaf at 460
428 0c0087c0 node capabilities per IEEE 1394
42c d1000001 --> unit directory at 430
unit directory at 430
-----------------------------------------------------------------
430 000476c2 directory_length 4, crc 30402
434 12000166 specifier id
438 13000001 version
43c 17000030 model
440 81000010 --> descriptor leaf at 480
descriptor leaf at 444
-----------------------------------------------------------------
444 0006c490 leaf_length 6, crc 50320
448 00000000 textual descriptor
44c 00000000 minimal ASCII
450 54432045 "TC E"
454 6c656374 "lect"
458 726f6e69 "roni"
45c 63000000 "c"
descriptor leaf at 460
-----------------------------------------------------------------
460 000772b4 leaf_length 7, crc 29364
464 00000000 textual descriptor
468 00000000 minimal ASCII
46c 44696769 "Digi"
470 74616c4b "talK"
474 6f6e6e65 "onne"
478 6b747833 "ktx3"
47c 32000000 "2"
descriptor leaf at 480
-----------------------------------------------------------------
480 000772b4 leaf_length 7, crc 29364
484 00000000 textual descriptor
488 00000000 minimal ASCII
48c 44696769 "Digi"
490 74616c4b "talK"
494 6f6e6e65 "onne"
498 6b747833 "ktx3"
49c 32000000 "2"
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In commit 97548575bef3 ("mmc: block: Convert RPMB to a character device") a
new function `mmc_rpmb_ioctl` was added. The final return is simply
returning a value of `0` instead of propagating the correct return code.
Discovered during a compilation with W=1, silence the following gcc warning
drivers/mmc/core/block.c:2470:6: warning: variable ‘ret’ set but not used
[-Wunused-but-set-variable]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Trigger the reset line of the mmc controller while probing, if available.
The reset should be optional for now, at least until all related DT nodes
have the reset property.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Add the reset to the documentation of the meson-gx mmc controller
bindings.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This commit adds "mellanox,bluefield-dw-mshc" for dwmmc driver
extension on Mellanox BlueField SoC platform.
Signed-off-by: Liming Sun <lsun@mellanox.com>
Reviewed-by: David Woods <dwoods@mellanox.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This commit adds extension to the dw_mmc driver for Mellanox BlueField
SoC. It updates the UHS_REG_EXT register to bring up the eMMC card on
this SoC.
Signed-off-by: Liming Sun <lsun@mellanox.com>
Reviewed-by: David Woods <dwoods@mellanox.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
The hard-coded 10ms delay in mmc_power_up came from
commit 79bccc5aefb4 ("mmc: increase power up delay"), which said "The TI
controller on Toshiba Tecra M5 needs more time to power up or the cards
will init incorrectly or not at all." But it's too engineering solution
for a special board but force all platforms to wait for that long time,
especially painful for mmc_power_up for eMMC when booting.
However, it's added since 2009, and we can't tell if other platforms
benefit from it. But in practise, the modern hardware are most likely to
have a stable power supply with 1ms after setting it for no matter PMIC
or discrete power. And more importnatly, most regulators implement the
callback of ->set_voltage_time_sel() for regulator core to wait for
specific period of time for the power supply to be stable, which means
once regulator_set_voltage_* return, the power should reach the the
minimum voltage that works for initialization. Of course, if there
are some other ways for host to power the card, we should allow them
to argue a suitable delay as well.
With this patch, we could assign the delay from firmware, or we could
assigne it via ->set_ios() callback from host drivers.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
post-power-on-delay-ms woule be reused to substitute the hard-coded 10ms
delay waiting for power supply to be stable, specificed by individual
platform/board. Default to 10ms as before, if no available.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This patch adds r8a77965 support in SDHI.
Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Tested-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Clean up the somewhat convoluted hardware-assisted flow control
handling.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Drop urb_ prefixes from value and index variables used in control
requests.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Replace all __u types with their u counterparts throughout the driver
(whose structures are not exported to user space).
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
Since forever this driver has had IXON and IXOFF mixed up, and has used
the latter rather than the former to enable hardware-assisted software
flow control on output.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
When _param is unsigned and the minimum value of range is 0, it gives
the following warning:
COVERITY NO_EFFECT: This less-than-zero comparison of an unsigned value
is never true.
Converting ._param to int to avoid this warning.
Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch fixes an issue that this driver cause double phy_put()
calling. This driver must not call phy_put() in the remove because
the driver calls devm_phy_get() in the probe.
Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy")
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch fixes an issue that reconnection is possible to fail
because unexpected state handling happens by the irqs. To fix the issue,
the driver disables the controller's irqs when disconnected.
Fixes: 746bfe63bba3 ("usb: gadget: renesas_usb3: add support for Renesas USB3.0 peripheral controller")
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch fixes an issue that this driver ignores errors other than
the non-existence of the device, f.e. a memory allocation failure
in devm_phy_get(). So, this patch replaces devm_phy_get() with
devm_phy_optional_get().
Reported-by: Simon Horman <horms+renesas@verge.net.au>
Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy")
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch fixes an issue that this driver cannot call phy_init()
if a gadget driver is alreadly loaded because usb_add_gadget_udc()
might call renesas_usb3_start() via .udc_start.
This patch also revises the typo (s/an optional/optional/).
Fixes: 279d4bc64060 ("usb: gadget: udc: renesas_usb3: add support for generic phy")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch fixes an issue that this driver causes panic if a gadget
driver is already loaded because usb_add_gadget_udc() might call
renesas_usb3_start() via .udc_start, and then pm_runtime_get_sync()
in renesas_usb3_start() doesn't work correctly.
Note that the usb3_to_dev() macro should not be called at this timing
because the macro uses the gadget structure.
Fixes: cf06df3fae28 ("usb: gadget: udc: renesas_usb3: move pm_runtime_{en,dis}able()")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
This patch fixes an issue that this driver doesn't remove its debugfs.
Fixes: 43ba968b00ea ("usb: gadget: udc: renesas_usb3: add debugfs to set the b-device mode")
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
|
The composite framework allows us to create gadgets composed from many
different functions, which need to fit into a single configuration
descriptor.
Some functions (like uvc) can produce configuration descriptors upwards
of 2500 bytes on their own.
This patch increases the limit from 1024 bytes to 4096.
Signed-off-by: Joel Pepper <joel.pepper@rwth-aachen.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
|
