summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-19virtio: console: Store each console's size in the console structureAmit Shah
With support for multiple consoles, just using one {rows,cols} pair in the config space is not going to suffice. Store each console's size as part of the console struct. This changes the behaviour for one case when multiport is not enabled: when notifier_add_vio() is called, the console size is taken from that of the last config-space update instead of fetching it afresh from the config space. Also add a helper to update the size in the console struct as we'll need to use the same code to update the size via control messages when multiport support is enabled. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: linuxppc-dev@ozlabs.org CC: Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Resize console port 0 on config intr only if multiport is offAmit Shah
When using multiport, we'll use control messages. Ensure we don't accidentally update port 0 size on config interrupts. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: linuxppc-dev@ozlabs.org CC: Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Add support for nonblocking write()sAmit Shah
If the host port is not open, a write() should either just return if the file is opened in non-blocking mode, or block till the host port is opened. Also, don't spin till host consumes data for nonblocking ports. For non-blocking ports, we can do away with the spinning and reclaim the buffers consumed by the host on the next write call or on the condition that'll make poll return. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Rename wait_is_over() to will_read_block()Amit Shah
We'll introduce a function that checks if write will block. Have function names that are similar for the two cases. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Don't always create a port 0 if using multiportAmit Shah
If we're using multiport, there's no point in always creating a console port. Create the console port only if the host doesn't support multiport. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Use a control message to add portsAmit Shah
Instead of the host and guest independently enumerating ports, switch to a control message to add ports where the host supplies the port number so there's no ambiguity or a possibility of a race between the host and the guest port numbers. We now no longer need the 'nr_ports' config value. Since no kernel has been released with the MULTIPORT changes yet, we have a chance to fiddle with the config space without adding compatibility features. This is beneficial for management software, which would now be able to instantiate ports at known locations and avoid problems that arise with implicit numbering in the host and the guest. This removes the 'guessing game' part of it, and management software can now actually indicate which id to spawn a particular port on. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Move code around for future patchesAmit Shah
We're going to use add_port() from handle_control_message() in the next patch. Move the add_port() and fill_queue(), which depends on it, above handle_control_message() to avoid forward declarations. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Remove config work handlerAmit Shah
We're going to switch to using control messages for port hot-plug and initial port discovery. Remove the config work handler which handled port hot-plug so far. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Don't call hvc_remove() on unplugging console portsAmit Shah
hvc_remove() has some bug which freezes other active hvc ports when one port is removed. So disable calling of hvc_remove() which deregisters a port with the hvc_console. If the hvc_console code calls into our get_chars() routine as a result of a poll operation, we will return -EPIPE and the hvc_console code will then do the necessary cleanup. This call will be restored when the bug in hvc_remove() is found and fixed. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Return -EPIPE to hvc_console if we lost the connectionAmit Shah
hvc_console handles -EPIPE properly when the connection to the host is lost. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Let host know of port or device add failuresAmit Shah
The host may want to know and let management apps notify of port or device add failures. Send a control message saying the device or port is not ready in this case. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: console: Add a __send_control_msg() that can send messages without a ↵Amit Shah
valid port We will introduce control messages that operate on the device as a whole rather than just ports. Make send_control_msg() a wrapper around __send_control_msg() which does not need a valid port. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: Revert "virtio: disable multiport console support."Amit Shah
This reverts commit b7a413015d2986edf020fba765c906cc9cbcbfc9. Multiport support was disabled for 2.6.34 because we wanted to introduce a new ABI and since we didn't have any released kernel with the older ABI and were out of the merge window, it didn't make sense keeping the older ABI around. Now we revert the patch disabling multiport and rework the ABI in the following patches. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: add_buf_gfpMichael S. Tsirkin
Add an add_buf variant that gets gfp parameter. Use that to allocate indirect buffers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19trans_virtio: use virtqueue_xxx wrappersMichael S. Tsirkin
Switch trans_virtio to new virtqueue_xxx wrappers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio-rng: use virtqueue_xxx wrappersMichael S. Tsirkin
Switch virtio-rng to new virtqueue_xxx wrappers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio_ring: remove a level of indirectionMichael S. Tsirkin
We have a single virtqueue_ops implementation, and it seems unlikely we'll get another one at this point. So let's remove an unnecessary level of indirection: it would be very easy to re-add it if another implementation surfaces. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio_net: use virtqueue_xxx wrappersMichael S. Tsirkin
Switch virtio_net to new virtqueue_xxx wrappers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio_blk: use virtqueue_xxx wrappersMichael S. Tsirkin
Switch virtio_blk to new virtqueue_xxx wrappers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio_console: use virtqueue_xxx wrappersMichael S. Tsirkin
Switch virtio_console to new virtqueue_xxx wrappers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio_balloon: use virtqueue_xxx wrappersMichael S. Tsirkin
Switch virtio_balloon to new virtqueue_xxx wrappers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio: add virtqueue_ vq_ops wrappersMichael S. Tsirkin
Add inline functions that wrap vq->vq_ops-> calls Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19virtio_blk: remove multichar constant.Rusty Russell
drivers/block/virtio_blk.c:228:13: warning: multi-character character constant Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: john cooper <john.cooper@redhat.com>
2010-05-19Add virtio disk identification ioctljohn cooper
Return serial string to the guest application via ioctl driver call. Note this form of interface to the guest userland was the consensus when the prior version using the ATA_IDENTIFY came under dispute. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19Add virtio disk identification supportjohn cooper
Add virtio-blk device id (s/n) support via virtio request. Signed-off-by: john cooper <john.cooper@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2010-05-19Merge branches 'ntrig', 'picolcd', 'prodikeys' and 'roccat-kone' into for-linusJiri Kosina
Conflicts: drivers/hid/Makefile
2010-05-19Merge branch 'egalax' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-ids.h
2010-05-19mx31_3ds: Support the keypad situated in the personality boardAlberto Panizzo
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-19MX3X: Add Keypad device definition for MX3X archAlberto Panizzo
This patch adds also the pin definition helpers in iomux-mx3.h Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-19Merge branch 'cando' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-core.c drivers/hid/hid-ids.h
2010-05-19Merge branches 'upstream-fixes', 'bkl-removal', 'debugfs-fixes' and ↵Jiri Kosina
'hid-suspend' into for-linus
2010-05-19Merge branch 'upstream' into for-linusJiri Kosina
Conflicts: drivers/hid/hid-wacom.c
2010-05-19HID: roccat: cleanup preprocessor macrosStefan Achatz
Removed useless preprocessor macros and renamed remaining one to be more qualified. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-19HID: roccat: refactor special event handlingStefan Achatz
As special events are reported along with hid event information all events are now processed further by standard handler. Also cleaned up this code. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-19HID: roccat: fix special button supportStefan Achatz
Added new data and changed workaround for abnormal button behaviour according to new gained knowledge about Roccat Kone device. Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-05-19Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entryBen Dooks
Make the driver depend on either ARCH_S3C2410 (as legacy) or the new device selection of SAMSUNG_DEV_TS. Change the menuconfig name to reflect this driver is now handling more devices that just the s3c2410. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19Input: s3c24xx_ts - Add FEAT for Samsung touchscreen supportNaveen Krishna
This patch adds a feature bit field in the touchscreen driver for Samsung SoCs. Which can be used to distinguish the TSADC module features. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ben-linux@fluff.org: minor fix to title] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19Input: s3c24xx_ts - Implement generic GPIO configuration callbackNaveen Krishna
This patch implements generic GPIO configuration function in Samsung touchscreen driver. And makes the touchscreen driver s3c24xx-ts.c generic to all the Samsung SoCs. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ben-linux@fluff.org: fixed title ] Signed-off-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-19ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configurationBen Dooks
Move the arch/arm/mach-s3c64xx/dev-ts.c file to arch/arm/plat-samsung and rename the Kconfig entry appropriately. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreenNaveen Krishna
This patch implements cfg_gpio function for Samsung touchscreen. And also modifies the H1940 machine respectively. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S3C64XX: Add touchscreen platform device definitionMaurus Cuelenaere
This patch adds the touchscreen platform device definition for S3C64XX boards. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: SAMSUNG: Move mach/ts.h to plat/ts.hMaurus Cuelenaere
This moves mach-s3c2410/include/mach/ts.h to plat-samsung/include/plat/ts.h in order to prepare for s3c64xx support in the touchscreen driver. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100Marek Szyprowski
Move i2c helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100Marek Szyprowski
Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: gpio.h cleanupMarek Szyprowski
This patch renames gpio related registers from s5pc1xx to s5pc100 to better match the plat-s5p framework style. GPIO_MP* defines now used anywhere thus has been removed. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100Marek Szyprowski
Move gpio-lib support from plat-s5pc1xx to mach-s5pc100. Only basic gpio functionality is now supported. Gpio interrupts are disabled temporarly and will be added later. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: Use common functions for gpiolib implementationMarek Szyprowski
GPIOlib helpers from plat-samsung already have functions for accessing 4bit gpio banks. This patch removes the duplicated functions from plat-s5pc1xx/gpiolib.c. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19drivers: serial: S5PC100 serial driver cleanupMarek Szyprowski
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as S3C6400/S3C6410/S5P6440. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p moveThomas Abraham
This is a pre-requisite clock patch for the plat-s5pc1xx to plat-s5p movement. The patches that perform the movement of the code from plat-s5pc1xx to plat-s5p (and mach-s5pc100) should also enable the build for the mach-s5pc100/clock.c code. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-19crypto: talitos - add support for sha224Kim Phillips
SEC h/w versions 2.1 and above support sha224 via explicit instruction. Performing sha224 ahashes on earlier versions is still possible because they support sha256 (sha224 is sha256 with different initial constants and a different truncation length). We do this by overriding hardware context self-initialization, and perform it manually in s/w instead. Thanks to Lee for his fixes for correct execution on actual sec2.0 h/w. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off by: Lee Nipper <lee.nipper@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit (git 2.34.1) at 2025-09-22 20:55:36 +0000