summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-24m68knommu: improve short help of m68knommu/Kconfig/RAMSIZE for '0' casePhilippe De Muyter
While it is explained in the long help text, meaning of '0' for RAMSIZE is easily overlooked because is not mentioned in the short help text. Add that. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-05-24m68knommu: remove un-used mcfsmc.hGreg Ungerer
Remove the un-used mcfsmc.h. All ColdFire platforms that use SMC ethernet devices are platform enabled to use the smc91x driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-05-24m68knommu: add smc91x support for ColdFire NETtel boardsGreg Ungerer
The ColdFire based NETtel boards use the SMC9196 ethernet devices. Switch to using a platform setup for these parts using the smc91x driver. The init code is taken strait out of arch/m68k/include/asm/mcfsmc.h, just cleaned up a bit. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-05-24m68knommu: add smc91x support to ColdFire 5249 platformGreg Ungerer
The Freescale M5249EVB board is fitted with an SMC LAN91c11 ethernet device. Add platform support to the M5249EVB setup code to support this. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-05-24m68knommu: remove size limit on non-MMU TASK_SIZEGreg Ungerer
The TASK_SIZE define is used in some places as a limit on the size of the virtual address space of a process. On non-MMU systems those addresses used in comparison will be physical addresses, and they could be anywhere in the 32bit physical address space. So for !CONFIG_MMU systems set the TASK_SIZE to the maximum physical address. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-05-24m68knommu: fix broken use of BUAD_TABLE_SIZE in 68328serial driverGreg Ungerer
Commit 8b505ca8e2600eb9e7dd2d6b2682a81717671374 ("serial: 68328serial.c: remove BAUD_TABLE_SIZE macro") misses one use of BAUD_TABLE_SIZE. So the resulting 68328serial.c does not compile: drivers/serial/68328serial.c: In function ‘m68328_console_setup’: drivers/serial/68328serial.c:1439: error: ‘BAUD_TABLE_SIZE’ undeclared (first use in this function) drivers/serial/68328serial.c:1439: error: (Each undeclared identifier is reported only once drivers/serial/68328serial.c:1439: error: for each function it appears in.) Fix that last use of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Cc: <stable@kernel.org>
2010-05-23perf report: Support multiple events on the TUIArnaldo Carvalho de Melo
The hists__tty_browse_tree function was created with the loop to print all events, and its equivalent, hists__tui_browse_tree, was created in a similar fashion, where it is possible to switch among the multiple events, if present, using TAB to go the next event, and shift+TAB (UNTAB) to go to the previous. The report TUI now shows as the window title the name of the event and a leak was fixed wrt pstacks. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-23perf annotate: Fix up usage of the build id cacheArnaldo Carvalho de Melo
It was assuming that the cache was always available and also wasn't checking if the file found in the build id cache was just a kallsyms file, that is not supported by objdump for disassembly. Reported-by: Ingo Molnar <mingo@elte.hu> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-05-24drm: Fixes linux-next & linux-2.6 checkstack warnings:Prarit Bhargava
drivers/gpu/drm/nouveau/nv40_graph.c: In function `nv40_graph_init': drivers/gpu/drm/nouveau/nv40_graph.c:400: warning: the frame size of 1184 bytes is larger than 1024 bytes drivers/gpu/drm/radeon/radeon_atombios.c: In function `radeon_get_atom_connector_info_from_supported_devices_table': drivers/gpu/drm/radeon/radeon_atombios.c:857: warning: the frame size of 1872 bytes is larger than 1024 bytes Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-24nouveau: fix acpi_lid_open undefinedRandy Dunlap
When CONFIG_ACPI_BUTTON=m (and probably when ACPI_BUTTON is not enabled) and NOUVEAU is built-in (not as a loadable module): nouveau_connector.c:(.text+0xe17ce): undefined reference to `acpi_lid_open' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-24drm/radeon/kms: release AGP bridge at suspendJerome Glisse
I think it's good to release the AGP bridge at suspend and reacquire it at resume. Also fix : https://bugzilla.kernel.org/show_bug.cgi?id=15969 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-24sh: fix up sh7785lcr_32bit_defconfig.Paul Mundt
The build scripts inadvertently dropped this down to 29-bit, fix it back up. Reported-by: Raul Porcel <armin76@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-24arch/sh/lib/strlen.S: Checkpatch cleanupAndrea Gelmini
arch/sh/lib/strlen.S:38: ERROR: trailing whitespace Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-23ARM: s3c6400_defconfig: Add NAND driverBen Dooks
Add the NAND driver to the list of inbuilt devices. Signed-of-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s3c6400_defconfig: enable sound as modulesBen Dooks
Add the ASoC/ALSA configuration for s3c6400_defconfig as modules Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s3c6400_defconfig: enable power managementBen Dooks
Enable power management in the default build Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34Ben Dooks
Update the s5pv210_defconfig to the latest kernel version v2.6.34 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34Ben Dooks
Update the s5pc110_defconfig to the latest kernel version v2.6.34 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34Ben Dooks
Update the s5p6442_defconfig to the latest kernel version v2.6.34 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34Ben Dooks
Update the s5p6440_defconfig to the latest kernel version v2.6.34 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s3c6400_defconfig: Update s3c6400_defconfig to v2.6.34Ben Dooks
Update the s3c6400_defconfig to the latest kernel version v2.6.34 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s3c2410_defconfig: Update s3c2410_defconfig to v2.6.34Ben Dooks
Update the s3c2410_defconfig to the latest kernel version v2.6.34 Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: s5pc100_defconfig: change ARCH_S5PC1XX to ARCH_S5PC100Ben Dooks
Fixup the defconfig post the latest moves, so ARCH_S5PC1XX becomes ARCH_S5PC100 which is sufficient to get the system building. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: S5PC100: Fixup merge problemsBen Dooks
Between problems with Kconfig and merging commits from several different sources, it seems the s5pc100 build's move from plat-s5pc11 has had a few problems. Since I do not have the trees to rebuild this quickly, the easiest thing is to simply fix the errors found once the s5pc100_defconfig actually builds. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: S5PC100: DMA: Add platform devices for PL330 DMACsJassi Brar
Samsung's Soc S5PC100 has three PL330 DMACs. First is dedicated for Memory->Memory data transfer while the other two meant for data transfer with peripherals. Define and add latter two PL330 DMACs as platform devices on the S5PC100 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: S5PC100: Fix definition of IRQ_EINT()Ben Dooks
Somewhere during the latest platform cleanups the IRQ_EINT definition got broken, so fix it by replacing it in <mach/irqs.h> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: SAMSUNG: fix suspend/resume on if some GPIO banks not presentPinkava J
When saving GPIOs during suspend/resume we need skip missing GPIO banks, not trying get corresponding chip again and again in infinite loop. Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht.cz> [ben-linux@fluff.org: shorten subject] Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-23ARM: Continue removing useless bootmem.h includesRussell King
Catch those which have been missed by 6262c92f because they were submitted via other routes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-23Merge branch 'perf' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
2010-05-23x86/mmiotrace: Remove redundant instruction prefix checksAkinobu Mita
Get rid of the duplicated entries in prefix_codes[] to eliminate redundant checks by skip_prefix(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Acked-by: Pekka Paalanen <pq@iki.fi> LKML-Reference: <1274140110-5841-1-git-send-email-akinobu.mita@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-23squashfs: fix name reading in squashfs_xattr_getPhillip Lougher
Only read potentially matching names into the target buffer, all obviously non matching names don't need to be read into the target buffer. Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-05-23squashfs: constify xattr handlersPhillip Lougher
Signed-off-by: Phillip Lougher <phillip@lougher.demon.co.uk>
2010-05-22Blackfin: SMP: fix continuation linesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: acvilon: fix timeout usage for I2CWolfram Sang
The timeout value is in jiffies, so it should be using HZ, not a plain number. As '10000' is ambiguous, 1HZ is used as conservative default. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Valentin Yakovenkov <yakovenkov@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: fix typo in BF537 IRQ commentMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: unify duplicate MEM_MT48LC32M8A2_75 kconfig optionsMike Frysinger
Reported-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: set ARCH_KMALLOC_MINALIGNFUJITA Tomonori
Architectures that handle DMA-non-coherent memory need to set ARCH_KMALLOC_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: use atomic kmalloc in L1 alloc so it too can be atomicMike Frysinger
Some drivers allocate L1 SRAM in atomic contexts, so make sure these functions also use GFP_ATOMIC to avoid BUG()'s. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: another year of changes (update copyright in boot log)Mike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: optimize strncpy a bitRobin Getz
Add a little strncpy optimization which can easily cut boot time by 20%. When the kernel is booting with initramfs, it builds up the filesystem from a cpio archive by calling strncpy_from_user() via fs/namei.c's do_getname() on every file in the archive (which can be lots) with a length of PATH_MAX (1024). This causes the dest of the strncpy to be padded with many NUL bytes. This optimization mostly causes these NUL bytes to be padded with a call to memset() which is already optimized for filling memory quickly, but the hardware loop helps a little bit as well. Boot time measured with 'loglevel=0' so UART speed doesn't get in the way. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: isram: clean up ITEST_COMMAND macro and improve the selftestsMike Frysinger
The IADDR2DTEST() macro had some duplicated logic with bit 11 and some incorrect comments, so scrub all of that. In order to verify these aren't a problem (and won't be in the future), extend the self tests to operate on as much L1 SRAM as possible. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: move string functions to normal lib/ assemblyRobin Getz
Since 'extern inline' doesn't work correctly in the context of the Linux kernel (too many overriding defines), move the string functions to normal lib/ assembly files (like the existing mem funcs). This avoids the forced inline all over the kernel and allows us to place them constantly in L1. This also avoids some module failures when gcc inserts calls to string functions but the kernel build system doesn't fully consult the library archives. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: SIC: cut down on IAR MMR reads a bitMike Frysinger
Tweak the for loops that operate on the SIC IAR system MMRs to avoid re-reading them multiple times in a row. System MMRs are a little slower to access, so avoid the penalty when possible. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: bf537-minotaur: fix build errors due to header changesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: kgdb: pass up the CC register instead of a 0 stubMike Frysinger
While the CC pseudo register can be deduced from the ASTAT register, make sure we set its value correctly instead of always stubbing it out as 0. GDB itself looks at this pseudo register instead of ASTAT, so we have to supply the right value. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: handle HW errors in the new "FAULT" printing codeRobin Getz
Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: show the whole accumulator in the pseudo DBG insnRobin Getz
Rather than print just part of the accumulator register, show the whole 40 bits. This matches the simulator behavior better. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: support all possible registers in the pseudo instructionsRobin Getz
Rather than decoding just the common R/P registers, handle all of them. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: add support for the DBG (debug output) pseudo insnRobin Getz
Another pseudo insn used by Blackfin simulators. Also factor some now common register lookup code out of the DBGA handlers. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-05-22Blackfin: change the BUG opcode to an unused 16-bit opcodeRobin Getz
The current BUG opcode includes the bit that flags the insn as a 32bit opcode, but it wasn't declaring it as 32bits. So pick an unused 16bit. URL: http://blackfin.uclinux.org/gf/tracker/5973 Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit (git 2.34.1) at 2025-09-15 09:55:20 +0000