summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-11-23sctp: Fix mis-ordering of user space data when multihoming in useNeil Horman
Recently had a bug reported to me, in which the user was sending packets with a payload containing a sequence number. The packets were getting delivered in order according the chunk TSN values, but the sequence values in the payload were arriving out of order. At first I thought it must be an application error, but we eventually found it to be a problem on the transmit side in the sctp stack. The conditions for the error are that multihoming must be in use, and it helps if each transport has a different pmtu. The problem occurs in sctp_outq_flush. Basically we dequeue packets from the data queue, and attempt to append them to the orrered packet for a given transport. After we append a data chunk we add the trasport to the end of a list of transports to have their packets sent at the end of sctp_outq_flush. The problem occurs when a data chunks fills up a offered packet on a transport. The function that does the appending (sctp_packet_transmit_chunk), will try to call sctp_packet_transmit on the full packet, and then append the chunk to a new packet. This call to sctp_packet_transmit, sends that packet ahead of the others that may be queued in the transport_list in sctp_outq_flush. The result is that frames that were sent in one order from the user space sending application get re-ordered prior to tsn assignment in sctp_packet_transmit, resulting in mis-sequencing of data payloads, even though tsn ordering is correct. The fix is to change where we assign a tsn. By doing this earlier, we are then free to place chunks in packets, whatever way we see fit and the protocol will make sure to do all the appropriate re-ordering on receive as is needed. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: William Reich <reich@ulticom.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: Update max.burst implementationVlad Yasevich
Current implementation of max.burst ends up limiting new data during cwnd decay period. The decay is happening becuase the connection is idle and we are allowed to fill the congestion window. The point of max.burst is to limit micro-bursts in response to large acks. This still happens, as max.burst is still applied to each transmit opportunity. It will also apply if a very large send is made (greater then allowed by burst). Tested-by: Florian Niederbacher <florian.niederbacher@student.uibk.ac.at> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: Turn the enum socket options into definesVlad Yasevich
Recent attempt to remove deprecated socket options demonstrated that removing options from the enum space will have severe binary compatibility issues. The reason is that it changes the subsequent enum space and causes option values to be redefined. To solve this, and to get rid of the ugly double statements for every option, we simply convert to the #define scheme. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: Remove useless last_time_used variableVlad Yasevich
The transport last_time_used variable is rather useless. It was only used when determining if CWND needs to be updated due to idle transport. However, idle transport detection was based on a Heartbeat timer and last_time_used was not incremented when sending Heartbeats. As a result the check for cwnd reduction was always true. We can get rid of the variable and just base our cwnd manipulation on the HB timer (like the code comment sais). We also have to call into the cwnd manipulation function regardless of whether HBs are enabled or not. That way we will detect idle transports if the user has disabled Heartbeats. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: remove deprecated SCTP_GET_*_OLD stuffsAmerigo Wang
SCTP_GET_*_OLD stuffs are schedlued to be removed. Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: allow setting path_maxrxt independent of SPP_PMTUD_ENABLEAndrei Pelinescu-Onciul
Since draft-ietf-tsvwg-sctpsocket-15.txt, setting the SPP_MTUD_ENABLE flag when changing pathmaxrxt via the SCTP_PEER_ADDR_PARAMS setsockopt is not required any longer. Signed-off-by: Andrei Pelinescu-Onciul <andrei@iptel.org> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: Update SWS avaoidance receiver side algorithmVlad Yasevich
We currently send window update SACKs every time we free up 1 PMTU worth of data. That a lot more SACKs then necessary. Instead, we'll now send back the actuall window every time we send a sack, and do window-update SACKs when a fraction of the receive buffer has been opened. The fraction is controlled with a sysctl. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: Select a working primary during sctp_connectx()Vlad Yasevich
When sctp_connectx() is used, we pick the first address as primary, even though it may not have worked. This results in excessive retransmits and poor performance. We should select the address that the association was established with. Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: Fix malformed "Invalid Stream Identifier" errorVlad Yasevich
The "Invalid Stream Identifier" error has a 16 bit reserved field at the end, thus making the parameter length be 8 bytes. We've never supplied that reserved field making wireshark tag the packet as malformed. Reported-by: Chris Dischino <cdischino@sonusnet.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: implement the sender side for SACK-IMMEDIATELY extensionWei Yongjun
This patch implement the sender side for SACK-IMMEDIATELY extension. Section 4.1. Sender Side Considerations Whenever the sender of a DATA chunk can benefit from the corresponding SACK chunk being sent back without delay, the sender MAY set the I-bit in the DATA chunk header. Reasons for setting the I-bit include o The sender is in the SHUTDOWN-PENDING state. o The application requests to set the I-bit of the last DATA chunk of a user message when providing the user message to the SCTP implementation. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: implement the receiver side for SACK-IMMEDIATELY extensionWei Yongjun
This patch implement the receiver side for SACK-IMMEDIATELY extension: Section 4.2. Receiver Side Considerations On reception of an SCTP packet containing a DATA chunk with the I-bit set, the receiver SHOULD NOT delay the sending of the corresponding SACK chunk and SHOULD send it back immediately. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23sctp: implement definition for SACK-IMMEDIATELY extensionWei Yongjun
This patch implement the definition for SACK-IMMEDIATELY extension. Section 3. The I-bit in the DATA Chunk Header The following Figure 1 shows the extended DATA chunk. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Type = 0 | Res |I|U|B|E| Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | TSN | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Stream Identifier | Stream Sequence Number | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Payload Protocol Identifier | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ \ \ / User Data / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 1 The only difference between the DATA chunk in Figure 1 and the DATA chunk defined in [RFC4960] is the addition of the I-bit in the flags field of the chunk header. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2009-11-23ARM: Clean up linker script using new linker script macros.Nelson Elhage
This patch is mostly a straightforward translation. The primary side effect to the resulting vmlinux should be to increase the alignment on the initramfs to the standard PAGE_SIZE from 32 bytes. Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: Tim Abbott <tabbott@ksplice.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23ARM: convert to use __HEAD and HEAD_TEXT macros.Tim Abbott
This has the consequence of changing the section name used for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. The .text.head output section is eliminated and the head text code is included at the start of the .init output section. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23x86, cpu: mv display_cacheinfo -> cpu_detect_cache_sizesBorislav Petkov
display_cacheinfo() doesn't display anything anymore and it is used to detect CPU cache sizes. Rename it accordingly. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> LKML-Reference: <20091121130145.GA31357@liondog.tnic> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-11-23Staging: octeon-ethernet: Assign proper MAC addresses.David Daney
Allocate MAC addresses using the same method as the bootloader. This avoids changing the MAC between bootloader and kernel operation as well as avoiding duplicates and use of addresses outside of the assigned range. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-23Staging: Octeon: Use symbolic values for irq numbers.David Daney
In addition to being magic numbers, the irq number passed to free_irq is incorrect. We need to use the correct symbolic value instead. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-23MIPS: Octeon: Fix compile error in drivers/staging/octeon/ethernet-mdio.cDavid Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-11-23hso: fix soft-lockupAntti Kaijanmäki
Fix soft-lockup in hso.c which is triggered on SMP machine when modem is removed while file descriptor(s) under /dev are still open: old version called kref_put() too early which resulted in destroying hso_serial and hso_device objects which were still used later on. Signed-off-by: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23hso: fix debug routinesAntti Kaijanmäki
Signed-off-by: Antti Kaijanmäki <antti.kaijanmaki@nomovok.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23perf symbols: Look for vmlinux in more placesArnaldo Carvalho de Melo
Now that we can check the buildid to see if it really matches, this can be done safely: vmlinux /boot/vmlinux /boot/vmlinux-<uts.release> /lib/modules/<uts.release>/build/vmlinux /usr/lib/debug/lib/modules/%s/vmlinux More can be added - if you know about distros that put the vmlinux somewhere else please let us know. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1259001550-8194-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23ixgbe: Only set/clear VFE in ixgbe_set_rx_modeAlexander Duyck
There appears to be a stray setting of the VFE bit when registering vlans. This should not be done as vlan filtering should be enabled any time the interface is not in promiscous mode Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23ixgbe: Use rx buffer length from rx ring for configuring rscctlMallikarjuna R Chilakala
While configuring rscctl use rx buffer length from rx ring structure instead of passing rx_buf_len to ixgbe_configure_rscctl Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23ixgbe: Modify 82599 HWRSC statistics countersMallikarjuna R Chilakala
Divide 82599 HWRSC counters into aggregated and flushed to count number of packets getting coalesced per TCP connection. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: remove BUG_ON() when be2net runs out of mccq wrbsSathya Perla
The driver can run out of mccq wrbs when completions don't arrive due to an unresponsive card. This must not hit a BUG_ON(); instead log a msg and return an error. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: Fix cleanup path in be_probe()Sathya Perla
Disabling msix was missing when probe fails after enabling msix. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: Issue fw_init/clean cmds to fwSathya Perla
These cmds are issued to the fw in probe/resume and remove/suspend paths to help fw execute some initialization and cleanup code. This change needed the be_hw_up() code to be refactored as be_get_config(). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: Fix rx_drops_no_fragments stat being incorrectly indexedSathya Perla
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23be2net: support configuration of 64 multicast addresses instead of 32Sathya Perla
To send upto 64 addresses in the multicast-set cmd, the non-embeeded cmd format that provides for a bigger buffer is used instead of an embedded format. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23net/ipv4: Move && and || to end of previous lineJoe Perches
On Sun, 2009-11-22 at 16:31 -0800, David Miller wrote: > It should be of the form: > if (x && > y) > > or: > if (x && y) > > Fix patches, rather than complaints, for existing cases where things > do not follow this pattern are certainly welcome. Also collapsed some multiple tabs to single space. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23x86: Tighten conditionals on MCE related statisticsJan Beulich
irq_thermal_count is only being maintained when X86_THERMAL_VECTOR, and both X86_THERMAL_VECTOR and X86_MCE_THRESHOLD don't need extra wrapping in X86_MCE conditionals. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Yong Wang <yong.y.wang@intel.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <4B06AFA902000078000211F8@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23pktgen: Fix device name comparesEric Dumazet
Commit e6fce5b916cd7f7f7 (pktgen: multiqueue etc.) tried to relax the pktgen restriction of one device per kernel thread, adding a '@' tag to device names. Problem is we dont perform check on full pktgen device name. This allows adding many time same 'device' to pktgen thread pgset "add_device eth0@0" one session later : pgset "add_device eth0@0" (This doesnt find previous device) This consumes ~1.5 MBytes of vmalloc memory per round and also triggers this warning : [ 673.186380] proc_dir_entry 'pktgen/eth0@0' already registered [ 673.186383] Modules linked in: pktgen ixgbe ehci_hcd psmouse mdio mousedev evdev [last unloaded: pktgen] [ 673.186406] Pid: 6219, comm: bash Tainted: G W 2.6.32-rc7-03302-g41cec6f-dirty #16 [ 673.186410] Call Trace: [ 673.186417] [<ffffffff8104a29b>] warn_slowpath_common+0x7b/0xc0 [ 673.186422] [<ffffffff8104a341>] warn_slowpath_fmt+0x41/0x50 [ 673.186426] [<ffffffff8114e789>] proc_register+0x109/0x210 [ 673.186433] [<ffffffff8100bf2e>] ? apic_timer_interrupt+0xe/0x20 [ 673.186438] [<ffffffff8114e905>] proc_create_data+0x75/0xd0 [ 673.186444] [<ffffffffa006ad38>] pktgen_thread_write+0x568/0x640 [pktgen] [ 673.186449] [<ffffffffa006a7d0>] ? pktgen_thread_write+0x0/0x640 [pktgen] [ 673.186453] [<ffffffff81149144>] proc_reg_write+0x84/0xc0 [ 673.186458] [<ffffffff810f5a58>] vfs_write+0xb8/0x180 [ 673.186463] [<ffffffff810f5c11>] sys_write+0x51/0x90 [ 673.186468] [<ffffffff8100b51b>] system_call_fastpath+0x16/0x1b [ 673.186470] ---[ end trace ccbb991b0a8d994d ]--- Solution to this problem is to use a odevname field (includes @ tag and suffix), instead of using netdevice name. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23sched_feat_write(): Update ppos instead of file->f_posJan Blunck
sched_feat_write() should update ppos instead of file->f_pos. (This reduces some BKL dependencies of this code.) Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: jkacur@redhat.com Cc: Arnd Bergmann <arnd@arndb.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jamie Lokier <jamie@shareable.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> LKML-Reference: <1258735245-25826-8-git-send-email-jblunck@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23stmmac: do not fail when the timer cannot be used.Giuseppe CAVALLARO
If the external timer cannot be used the driver will continue to work without mitigation. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23stmmac: fixed a compilation error when use the external timerGiuseppe CAVALLARO
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2009-11-23ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPATJean PIHET
Using OABI, the call to put_user in do_signal can fail causing the calling app to hang. The solution is to check if put_user fails and force the app to seg fault in that case. Tested with multiple sleeping apps/threads (using the nanosleep syscall) and suspend/resume. Signed-off-by: janboe <janboe.ye at gmail.com> Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23perf tools: Add support for breakpoint events in perf toolsFrederic Weisbecker
Add the breakpoint events support with this new sysnopsis: mem:addr[:access] Where addr is a raw addr value in the kernel and access can be either [r][w][x] Example to profile tasklist_lock: $ grep tasklist_lock /proc/kallsyms ffffffff8189c000 D tasklist_lock $ perf record -e mem:0xffffffff8189c000:rw -a -f -c 1 $ perf report # Samples: 62 # # Overhead Command Shared Object Symbol # ........ ............... ............. ...... # 29.03% swapper [kernel] [k] _raw_read_trylock 29.03% swapper [kernel] [k] _raw_read_unlock 19.35% init [kernel] [k] _raw_read_trylock 19.35% init [kernel] [k] _raw_read_unlock 1.61% events/0 [kernel] [k] _raw_read_trylock 1.61% events/0 [kernel] [k] _raw_read_unlock Coming soon: - Support for symbols in the event definition. - Default period to 1 for breakpoint events because these are not high frequency events. The same thing is needed for trace events. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258987355-8751-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com>
2009-11-23perf: Add kernel side syscall events support for breakpointsFrederic Weisbecker
Add the remaining necessary bits to support breakpoints created through perf syscall. We don't use the software counter interface as: - We don't need to check against recursion, this is already done in hardware breakpoints arch level. - We already know the perf event we are dealing with when the event is to be committed. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258987355-8751-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23hw-breakpoints: Check the breakpoint params from perf toolsFrederic Weisbecker
Perf tools create perf events as disabled in the beginning. Breakpoints are then considered like ptrace temporary breakpoints, only meant to reserve a breakpoint slot until we get all the necessary informations from the user. In this case, we don't check the address that is breakpointed as it is NULL in the ptrace case. But perf tools don't have the same purpose, events are created disabled to wait for all events to be created before enabling all of them. We want to check the breakpoint parameters in this case. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258987355-8751-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23hw-breakpoints: Include only linux/perf_event.h from kernel part of bp headersFrederic Weisbecker
As userspace only needs the breakpoints enum types from the breakpoints headers. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Prasad <prasad@linux.vnet.ibm.com> LKML-Reference: <1258987355-8751-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23hw-breakpoint: Attribute authorship of hw-breakpoint related filesK.Prasad
Attribute authorship to developers of hw-breakpoint related files. Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091123154713.GA5593@in.ibm.com> [ v2: moved it to latest -tip ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23ACPI: DMI init_set_sci_en_on_resume for HP-Compaq C700Len Brown
...else ACPI thermal controls fail after resume. http://bugzilla.kernel.org/show_bug.cgi?id=13745 Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-23perf_events: Restore sanity to scaling landPeter Zijlstra
It is quite possible to call update_event_times() on a context that isn't actually running and thereby confuse the thing. perf stat was reporting !100% scale values for software counters (2e2af50b perf_events: Disable events when we detach them, solved the worst of that, but there was still some left). The thing that happens is that because we are not self-reaping (we have a caring parent) there is a time between the last schedule (out) and having do_exit() called which will detach the events. This period would be accounted as enabled,!running because the event->state==INACTIVE, even though !event->ctx->is_active. Similar issues could have been observed by calling read() on a event while the attached task was not scheduled in. Solve this by teaching update_event_times() about ctx->is_active. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1258984836.4531.480.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-23Merge branch 'for-2.6.32' into for-2.6.33Mark Brown
2009-11-23ASoC: Fix suspend with active audio streamsMark Brown
When we get a stream suspend event force the power down since otherwise the stream would remain marked as active. In future we'll probably want to make this stream-specific and add an interface to make the power down of other widgets optional in order to support leaving bypass paths active while suspending the processor. Cc: stable@kernel.org Reported-by: Joonyoung Shim <jy0922.shim@samsung.com> Tested-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-23ARM: dma-mapping: split dma_unmap_page() from dma_unmap_single()Russell King
We will need to treat dma_unmap_page() differently from dma_unmap_single() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Jamie Iles <jamie@jamieiles.com>
2009-11-23ARM: dma-mapping: provide dma_to_page()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Jamie Iles <jamie@jamieiles.com>
2009-11-23ARM: dma-mapping: simplify page_to_dma() and __pfn_to_bus()Russell King
The non-highmem() and the __pfn_to_bus() based page_to_dma() both compile to the same code, so its pointless having these two different approaches. Use the __pfn_to_bus() based version. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
2009-11-23ARM: provide phys_to_page() to complement page_to_phys()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-By: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit (git 2.34.1) at 2025-09-19 02:30:57 +0000